- Created
- 12d ago
- Changed
- 12d ago
- Project
- p/asciicast2webp
- Commit
- 9617557bc3a07efd5f007ee69b51e8ad6f6d8e5e
- Runner
- Alpine 3.24 aarch64
- State
- Success
- Notified
- 1
- Duration
- 13m13s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_qemu='qemu-system-aarch64 -M virt -cpu max -bios /usr/share/edk2/aarch64/QEMU_EFI.fd'
+ acid_dist=alpine
+ acid_image=generic_alpine-3.24.1-aarch64-uefi-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/generic_alpine-3.24.1-aarch64-uefi-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/generic_alpine-3.24.1-aarch64-uefi-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-aarch64 -M virt -cpu max -bios /usr/share/edk2/aarch64/QEMU_EFI.fd -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
UEFI firmware (version built at 21:11:28 on Aug 25 2026)
^[[=3h
^[[8;056;240t
BdsDxe: loading Boot0002 "UEFI Misc Device" from PciRoot(0x0)/Pci(0x2,0x0)
BdsDxe: starting Boot0002 "UEFI Misc Device" from PciRoot(0x0)/Pci(0x2,0x0)
error: /home/buildozer/aports/main/grub/src/grub-2.14/grub-core/term/serial.c:grub_cmd_serial:278:serial port `com0' isn't found.
error: /home/buildozer/aports/main/grub/src/grub-2.14/grub-core/commands/terminal.c:handle_command:138:terminal `serial' isn't found.
error: /home/buildozer/aports/main/grub/src/grub-2.14/grub-core/commands/terminal.c:handle_command:138:terminal `serial' isn't found.
GNU GRUB version 2.14
/--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------\
|*Alpine Linux v3.24, with Linux virt |
| UEFI Firmware Settings |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
\--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------/
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line.
The highlighted entry will be executed automatically in 0s.
Booting `Alpine Linux v3.24, with Linux virt'
Loading Linux virt ...
Loading initial ramdisk ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x000f0510]
[ 0.000000] Linux version 6.18.35-0-virt (buildozer@build-3-24-aarch64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-06-09 12:34:47
[ 0.000000] efi: EFI v2.7 by EDK II
[ 0.000000] efi: SMBIOS 3.0=0x47d60000 MEMATTR=0x45ab2418 ACPI 2.0=0x47ff3018 INITRD=0x45a9ae98 RNG=0x47ff3198 MEMRESERVE=0x45a9ac18
[ 0.000000] random: crng init done
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000047FF3018 000024 (v02 BOCHS )
[ 0.000000] ACPI: XSDT 0x0000000047FF3F18 000064 (v01 BOCHS BXPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x0000000047FF3B18 000114 (v06 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x0000000047FF1018 001551 (v02 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x0000000047FF3C98 00019C (v04 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: PPTT 0x0000000047FF3098 00009C (v02 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: GTDT 0x0000000047FF3818 000068 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: MCFG 0x0000000047FF3A98 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: SPCR 0x0000000047FF3918 000050 (v02 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: DBG2 0x0000000047FF3998 000057 (v00 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: IORT 0x0000000047FF3A18 000054 (v05 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: SPCR: console: pl011,mmio32,0x9000000,9600
[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13f604b40-0x13f606fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000004611ffff]
[ 0.000000] node 0: [mem 0x0000000046120000-0x000000004619ffff]
[ 0.000000] node 0: [mem 0x00000000461a0000-0x00000000461fffff]
[ 0.000000] node 0: [mem 0x0000000046200000-0x000000004651ffff]
[ 0.000000] node 0: [mem 0x0000000046520000-0x0000000047bbffff]
[ 0.000000] node 0: [mem 0x0000000047bc0000-0x0000000047feffff]
[ 0.000000] node 0: [mem 0x0000000047ff0000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff]
[ 0.000000] psci: probing for conduit method from ACPI.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 34 pages/cpu s99544 r8192 d31528 u139264
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Address authentication (IMP DEF algorithm)
[ 0.000000] CPU features: detected: HCRX_EL2 register
[ 0.000000] CPU features: detected: Stage-1 Permission Indirection Extension (S1PIE)
[ 0.000000] CPU features: detected: Store Only MTE Tag Check
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-virt root=UUID=29c86e07-1518-4feb-85ff-c46ca56c3f7f ro modules=sd-mod,usb-storage,ext4,gpio_pl061,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0
[ 0.000000] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4,gpio_pl061,ena,gve,mana", will be passed to user space.
[ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576
[ 0.000000] Policy zone: Normal
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Dynamic Preempt: none
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv2m: ACPI overriding V2M MSI_TYPER (base:80, num:64)
[ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000067] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.007554] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.028017] Console: colour dummy device 80x25
[ 0.030605] printk: legacy console [tty0] enabled
[ 0.040058] ACPI: Core revision 20250807
[ 0.048314] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=1000000)
[ 0.049080] pid_max: default: 32768 minimum: 301
[ 0.054528] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.057666] landlock: Up and running.
[ 0.057764] Yama: becoming mindful.
[ 0.062566] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.062859] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.132271] rcu: Hierarchical SRCU implementation.
[ 0.132438] rcu: Max phase no-delay instances is 400.
[ 0.135408] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.143716] Remapping and enabling EFI services.
[ 0.152022] smp: Bringing up secondary CPUs ...
[ 0.162858] Detected PIPT I-cache on CPU1
[ 0.167365] CPU1: Booted secondary processor 0x0000000001 [0x000f0510]
[ 0.175223] Detected PIPT I-cache on CPU2
[ 0.175490] CPU2: Booted secondary processor 0x0000000002 [0x000f0510]
[ 0.179380] Detected PIPT I-cache on CPU3
[ 0.179753] CPU3: Booted secondary processor 0x0000000003 [0x000f0510]
[ 0.181548] smp: Brought up 1 node, 4 CPUs
[ 0.182003] SMP: Total of 4 processors activated.
[ 0.182129] CPU: All CPU(s) started at EL1
[ 0.182580] CPU features: detected: Branch Target Identification
[ 0.182685] CPU features: detected: 32-bit EL0 Support
[ 0.182824] CPU features: detected: 32-bit EL1 Support
[ 0.182897] CPU features: detected: ARMv8.4 Translation Table Level
[ 0.183010] CPU features: detected: Instruction cache invalidation not required for I/D coherence
[ 0.183099] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.183236] CPU features: detected: Common not Private translations
[ 0.183298] CPU features: detected: CRC32 instructions
[ 0.183380] CPU features: detected: Data independent timing control (DIT)
[ 0.183435] CPU features: detected: E0PD
[ 0.183478] CPU features: detected: Enhanced Counter Virtualization
[ 0.183531] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF)
[ 0.183588] CPU features: detected: Enhanced Privileged Access Never
[ 0.183640] CPU features: detected: Enhanced Virtualization Traps
[ 0.183692] CPU features: detected: FPMR
[ 0.183734] CPU features: detected: Fine Grained Traps
[ 0.183806] CPU features: detected: Guarded Control Stack (GCS)
[ 0.184077] CPU features: detected: Generic authentication (IMP DEF algorithm)
[ 0.184282] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.184429] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2)
[ 0.184521] CPU features: detected: LSE atomic instructions
[ 0.184572] CPU features: detected: Memory Copy and Memory Set instructions
[ 0.184630] CPU features: detected: Privileged Access Never
[ 0.184680] CPU features: detected: SCTLR2
[ 0.184724] CPU features: detected: RAS Extension Support
[ 0.184842] CPU features: detected: RASv1p1 Extension Support
[ 0.184899] CPU features: detected: Random Number Generator
[ 0.185026] CPU features: detected: Speculation barrier (SB)
[ 0.185153] CPU features: detected: Stage-2 Force Write-Back
[ 0.185206] CPU features: detected: Trap EL0 IMPLEMENTATION DEFINED functionality
[ 0.185267] CPU features: detected: TLB range maintenance instructions
[ 0.185321] CPU features: detected: WFx with timeout
[ 0.185503] CPU features: detected: FAR on MTE Tag Check Fault
[ 0.185597] CPU features: detected: Scalable Matrix Extension
[ 0.185664] CPU features: detected: FA64
[ 0.185707] CPU features: detected: SME2
[ 0.185749] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.185805] CPU features: detected: Scalable Vector Extension
[ 0.207324] alternatives: applying system-wide alternatives
[ 0.227998] CPU features: detected: Hardware dirty bit management on CPU0-3
[ 0.229297] SVE: maximum available vector length 256 bytes per vector
[ 0.229435] SVE: default vector length 64 bytes per vector
[ 0.232540] SME: minimum available vector length 16 bytes per vector
[ 0.232685] SME: maximum available vector length 256 bytes per vector
[ 0.232759] SME: default vector length 32 bytes per vector
[ 0.255083] Memory: 3985736K/4194304K available (13248K kernel code, 1990K rwdata, 8392K rodata, 2048K init, 9281K bss, 203320K reserved, 0K cma-reserved)
[ 0.302516] devtmpfs: initialized
[ 0.340441] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.341668] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.342787] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.344192] 23952 pages in range for non-PLT usage
[ 0.344287] 515472 pages in range for PLT usage
[ 0.348890] pinctrl core: initialized pinctrl subsystem
[ 0.359095] SMBIOS 3.0.0 present.
[ 0.359458] DMI: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022
[ 0.360106] DMI: Memory slots populated: 1/1
[ 0.392679] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.401874] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.403008] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.403660] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.404162] audit: initializing netlink subsys (disabled)
[ 0.407980] audit: type=2000 audit(0.315:1): state=initialized audit_enabled=0 res=1
[ 0.413844] thermal_sys: Registered thermal governor 'step_wise'
[ 0.416086] cpuidle: using governor ladder
[ 0.416532] cpuidle: using governor menu
[ 0.419227] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.420655] ASID allocator initialised with 65536 entries
[ 0.421491] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.423232] Serial: AMBA PL011 UART driver
[ 0.438826] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.439081] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.439316] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.439441] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.439559] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.439674] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.439835] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.439983] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.466365] ACPI: Added _OSI(Module Device)
[ 0.466510] ACPI: Added _OSI(Processor Device)
[ 0.466566] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.514284] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.531231] ACPI: Interpreter enabled
[ 0.531341] ACPI: Using GIC for interrupt routing
[ 0.532272] ACPI: MCFG table detected, 1 entries
[ 0.616192] ACPI: CPU0 has been hot-added
[ 0.617565] ACPI: CPU1 has been hot-added
[ 0.618529] ACPI: CPU2 has been hot-added
[ 0.619558] ACPI: CPU3 has been hot-added
[ 0.638565] ARMH0011:00: ttyAMA0 at MMIO 0x9000000 (irq = 12, base_baud = 0) is a SBSA
[ 0.641648] printk: console [ttyAMA0] enabled
[ 0.687671] ACPI: PCI: Interrupt link L000 configured for IRQ 35
[ 0.688209] ACPI: PCI: Interrupt link L001 configured for IRQ 36
[ 0.688492] ACPI: PCI: Interrupt link L002 configured for IRQ 37
[ 0.688792] ACPI: PCI: Interrupt link L003 configured for IRQ 38
[ 0.689582] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.692101] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.701678] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[ 0.705221] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 0.713162] acpi PNP0A08:00: ECAM area [mem 0x4010000000-0x401fffffff] reserved by PNP0C02:00
[ 0.714035] acpi PNP0A08:00: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff]
[ 0.715457] ACPI: Remapped I/O 0x000000003eff0000 to [io 0x0000-0xffff window]
[ 0.722378] PCI host bridge to bus 0000:00
[ 0.723490] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff window]
[ 0.723608] pci_bus 0000:00: root bus resource [io 0x0000-0xffff window]
[ 0.723714] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff window]
[ 0.724001] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.726142] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint
[ 0.738325] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.740175] pci 0000:00:01.0: BAR 0 [io 0x0100-0x011f]
[ 0.740643] pci 0000:00:01.0: BAR 1 [mem 0x10042000-0x10042fff]
[ 0.740850] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]
[ 0.741310] pci 0000:00:01.0: ROM [mem 0xfffc0000-0xffffffff pref]
[ 0.745370] pci 0000:00:02.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.746367] pci 0000:00:02.0: BAR 0 [io 0x0080-0x00ff]
[ 0.746551] pci 0000:00:02.0: BAR 1 [mem 0x10041000-0x10041fff]
[ 0.746741] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]
[ 0.750352] pci 0000:00:03.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.751399] pci 0000:00:03.0: BAR 0 [io 0x0000-0x007f]
[ 0.751673] pci 0000:00:03.0: BAR 1 [mem 0x10040000-0x10040fff]
[ 0.752058] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]
[ 0.759595] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned
[ 0.760434] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned
[ 0.761210] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned
[ 0.761525] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned
[ 0.761744] pci 0000:00:01.0: BAR 1 [mem 0x10040000-0x10040fff]: assigned
[ 0.762131] pci 0000:00:02.0: BAR 1 [mem 0x10041000-0x10041fff]: assigned
[ 0.762308] pci 0000:00:03.0: BAR 1 [mem 0x10042000-0x10042fff]: assigned
[ 0.762490] pci 0000:00:02.0: BAR 0 [io 0x1000-0x107f]: assigned
[ 0.763013] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10ff]: assigned
[ 0.763797] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned
[ 0.765223] pci_bus 0000:00: resource 4 [mem 0x10000000-0x3efeffff window]
[ 0.765473] pci_bus 0000:00: resource 5 [io 0x0000-0xffff window]
[ 0.765625] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff window]
[ 0.775216] iommu: Default domain type: Translated
[ 0.775465] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.786209] efivars: Registered efivars operations
[ 0.807489] clocksource: Switched to clocksource arch_sys_counter
[ 0.822705] VFS: Disk quotas dquot_6.6.0
[ 0.823168] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.828278] pnp: PnP ACPI init
[ 0.833256] system 00:00: [mem 0x4010000000-0x401fffffff window] could not be reserved
[ 0.834434] pnp: PnP ACPI: found 1 devices
[ 0.886075] NET: Registered PF_INET protocol family
[ 0.888522] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.992902] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.993298] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.993754] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.994798] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.995526] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.998843] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.999896] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 1.000727] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 1.003931] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.005074] NET: Registered PF_XDP protocol family
[ 1.005994] PCI: CLS 0 bytes, default 64
[ 1.013896] kvm [1]: HYP mode not available
[ 1.016203] Unpacking initramfs...
[ 1.028128] Initialise system trusted keyrings
[ 1.033955] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 1.158038] Key type asymmetric registered
[ 1.158398] Asymmetric key parser 'x509' registered
[ 1.159161] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.160757] io scheduler mq-deadline registered
[ 1.161000] io scheduler kyber registered
[ 1.161485] io scheduler bfq registered
[ 1.196828] ACPI: \_SB_.L001: Enabled at IRQ 36
[ 1.198199] virtio-pci 0000:00:01.0: enabling device (0005 -> 0007)
[ 1.212047] ACPI: \_SB_.L002: Enabled at IRQ 37
[ 1.212369] virtio-pci 0000:00:02.0: enabling device (0005 -> 0007)
[ 1.222039] ACPI: \_SB_.L003: Enabled at IRQ 38
[ 1.222370] virtio-pci 0000:00:03.0: enabling device (0005 -> 0007)
[ 1.227846] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.256354] hv_vmbus: registering driver hyperv_keyboard
[ 1.263112] rtc-efi rtc-efi.0: registered as rtc0
[ 1.265186] rtc-efi rtc-efi.0: setting system clock to 2026-09-04T13:46:17 UTC (1788529577)
[ 1.271368] NET: Registered PF_INET6 protocol family
[ 1.287223] Segment Routing with IPv6
[ 1.288143] In-situ OAM (IOAM) with IPv6
[ 1.364223] registered taskstats version 1
[ 1.370974] Loading compiled-in X.509 certificates
[ 1.479640] Freeing initrd memory: 10880K
[ 1.645066] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: 87fa969a47f3e2a6aa35859eb932a17c95abcd82'
[ 1.698171] Demotion targets for Node 0: null
[ 1.701277] Key type .fscrypt registered
[ 1.701400] Key type fscrypt-provisioning registered
[ 1.737329] clk: Disabling unused clocks
[ 1.738385] PM: genpd: Disabling unused power domains
[ 2.158215] Freeing unused kernel memory: 2048K
[ 2.161226] Run /init as init process
[ 2.410411] Alpine Init 3.14.0-r0
[ 2.418897] Loading boot drivers...
[ 2.543409] SCSI subsystem initialized
[ 2.639676] ACPI: bus type USB registered
[ 2.641399] usbcore: registered new interface driver usbfs
[ 2.642324] usbcore: registered new interface driver hub
[ 2.643252] usbcore: registered new device driver usb
[ 2.675790] usbcore: registered new interface driver usb-storage
[ 2.894390] pps_core: LinuxPPS API ver. 1 registered
[ 2.894609] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.910148] PTP clock support registered
[ 3.056130] loop: module loaded
[ 3.242302] ACPI: bus type drm_connector registered
[ 3.410026] Loading boot drivers: ok.
[ 3.439983] Mounting root...
[ 4.210986] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 4.227289] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 4.249671] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 4.249844] GPT:503807 != 12582911
[ 4.250008] GPT:Alternate GPT header not at the end of the disk.
[ 4.250161] GPT:503807 != 12582911
[ 4.250290] GPT: Use GNU Parted to correct GPT errors.
[ 4.251765] vda: vda1 vda2
[ 4.255942] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 4.260257] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 5.808106] EXT4-fs (vda2): mounted filesystem 29c86e07-1518-4feb-85ff-c46ca56c3f7f ro with ordered data mode. Quota mode: none.
[ 5.812389] Mounting root: ok.
Welcome to Alpine Linux 3.24
Kernel 6.18.35-0-virt on aarch64 (/dev/ttyAMA0)
alpine-ci login:
Task log
....................................................................status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.6-r0 -> 3.0.8-r0)
(2/2) Upgrading apk-tools (3.0.6-r0 -> 3.0.8-r0)
Executing busybox-1.37.0-r31.trigger
Continuing with the main upgrade transaction:
( 1/33) Upgrading libcrypto3 (3.5.7-r0 -> 3.5.8-r0)
( 2/33) Upgrading libssl3 (3.5.7-r0 -> 3.5.8-r0)
( 3/33) Upgrading libblkid (2.42-r0 -> 2.42.1-r0)
( 4/33) Upgrading blkid (2.42-r0 -> 2.42.1-r0)
( 5/33) Upgrading libsmartcols (2.42-r0 -> 2.42.1-r0)
( 6/33) Upgrading partx (2.42-r0 -> 2.42.1-r0)
( 7/33) Upgrading libuuid (2.42-r0 -> 2.42.1-r0)
( 8/33) Upgrading libfdisk (2.42-r0 -> 2.42.1-r0)
( 9/33) Upgrading sfdisk (2.42-r0 -> 2.42.1-r0)
(10/33) Upgrading libexpat (2.8.1-r0 -> 2.8.4-r0)
(11/33) Upgrading sqlite-libs (3.53.2-r0 -> 3.53.4-r0)
(12/33) Upgrading python3 (3.14.5-r0 -> 3.14.7-r1)
(13/33) Upgrading python3-pycache-pyc0 (3.14.5-r0 -> 3.14.7-r1)
(14/33) Upgrading pyc (3.14.5-r0 -> 3.14.7-r1)
(15/33) Upgrading python3-pyc (3.14.5-r0 -> 3.14.7-r1)
(16/33) Upgrading py3-charset-normalizer (3.4.7-r0 -> 3.4.9-r0)
(17/33) Upgrading py3-charset-normalizer-pyc (3.4.7-r0 -> 3.4.9-r0)
(18/33) Upgrading tzdata (2026b-r0 -> 2026c-r0)
(19/33) Upgrading device-mapper-libs (2.03.35-r2 -> 2.03.35-r3)
(20/33) Upgrading linux-virt (6.18.35-r0 -> 6.18.48-r0)
(21/33) Upgrading libmount (2.42-r0 -> 2.42.1-r0)
(22/33) Upgrading mount (2.42-r0 -> 2.42.1-r0)
(23/33) Upgrading libnvmemi (1.16.1-r1 -> 1.16.2-r0)
(24/33) Upgrading libnvme (1.16.1-r1 -> 1.16.2-r0)
(25/33) Upgrading openssh-keygen (10.3_p1-r0 -> 10.3_p1-r1)
(26/33) Upgrading openssh-client-common (10.3_p1-r0 -> 10.3_p1-r1)
(27/33) Upgrading openssh-client-default (10.3_p1-r0 -> 10.3_p1-r1)
(28/33) Upgrading openssh-sftp-server (10.3_p1-r0 -> 10.3_p1-r1)
(29/33) Upgrading openssh-server-common (10.3_p1-r0 -> 10.3_p1-r1)
(30/33) Upgrading openssh-server-common-openrc (10.3_p1-r0 -> 10.3_p1-r1)
(31/33) Upgrading openssh-server (10.3_p1-r0 -> 10.3_p1-r1)
Executing openssh-server-10.3_p1-r1.post-upgrade
(32/33) Upgrading openssh (10.3_p1-r0 -> 10.3_p1-r1)
(33/33) Upgrading openssh-server-pam (10.3_p1-r0 -> 10.3_p1-r1)
Executing busybox-1.37.0-r31.trigger
Executing ca-certificates-20260611-r0.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.14.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.48-0-virt
Executing grub-2.14-r0.trigger
* Generating grub configuration file ...
* Found linux image: /boot/vmlinuz-virt
* Found initrd image: /boot/initramfs-virt
* Adding boot menu entry for UEFI Firmware Settings ...
* done
OK: 179.7 MiB in 202 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/12) Installing brotli-libs (1.2.0-r1)
( 2/12) Installing c-ares (1.34.8-r0)
( 3/12) Installing libunistring (1.4.2-r0)
( 4/12) Installing libidn2 (2.3.8-r0)
( 5/12) Installing nghttp2-libs (1.69.0-r0)
( 6/12) Installing libpsl (0.21.5-r3)
( 7/12) Installing libcurl (8.22.0-r0)
( 8/12) Installing pcre2 (10.48-r0)
( 9/12) Installing git (2.54.0-r0)
(10/12) Installing git-init-template (2.54.0-r0)
(11/12) Installing gnu-libiconv-libs (1.18-r0)
(12/12) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r31.trigger
OK: 193.0 MiB in 214 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/asciicast2webp.git asciicast2webp
Cloning into 'asciicast2webp'...
remote: Enumerating objects: 48, done.
remote: Counting objects: 100% (48/48), done.
remote: Compressing objects: 100% (46/46), done.
remote: Total 48 (delta 24), reused 0 (delta 0), pack-reused 0 (from 0)
Receiving objects: 100% (48/48), 28.42 KiB | 373.00 KiB/s, done.
Resolving deltas: 100% (24/24), done.
+ cd asciicast2webp
+ git -c 'advice.detachedHead=false' checkout 9617557bc3a07efd5f007ee69b51e8ad6f6d8e5e
HEAD is now at 9617557 CMake style adjustment
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=1.0.0-3-g9617557
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/1.0.0-3-g9617557/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake libvterm-static cairo-static libwebp-static jq-dev oniguruma-dev ncurses-static fontconfig-static freetype-static pixman-static libpng-static zlib-static bzip2-static brotli-static expat-static
( 1/119) Installing brotli (1.2.0-r1)
( 2/119) Installing pkgconf (2.5.1-r0)
( 3/119) Installing brotli-dev (1.2.0-r1)
( 4/119) Installing brotli-static (1.2.0-r1)
( 5/119) Installing jansson (2.15.0-r0)
( 6/119) Installing binutils (2.45.1-r1)
( 7/119) Installing libmagic (5.47-r2)
( 8/119) Installing file (5.47-r2)
( 9/119) Installing libgcc-static (15.2.0-r5)
( 10/119) Installing libgomp (15.2.0-r5)
( 11/119) Installing libatomic (15.2.0-r5)
( 12/119) Installing gmp (6.3.0-r4)
( 13/119) Installing isl26 (0.26-r2)
( 14/119) Installing mpfr4 (4.2.2-r0)
( 15/119) Installing mpc1 (1.3.1-r1)
( 16/119) Installing gcc (15.2.0-r5)
( 17/119) Installing libstdc++-dev (15.2.0-r5)
( 18/119) Installing musl-dev (1.2.6-r2)
( 19/119) Installing g++ (15.2.0-r5)
( 20/119) Installing make (4.4.1-r4)
( 21/119) Installing fortify-headers (3.0.1-r2)
( 22/119) Installing patch (2.8-r0)
( 23/119) Installing build-base (0.5-r4)
( 24/119) Installing bzip2-dev (1.0.8-r6)
( 25/119) Installing bzip2-static (1.0.8-r6)
( 26/119) Installing cairo-tools (1.18.4-r1)
( 27/119) Installing libxau (1.0.12-r0)
( 28/119) Installing libxdmcp (1.1.5-r1)
( 29/119) Installing libxcb (1.17.0-r2)
( 30/119) Installing libx11 (1.8.13-r0)
( 31/119) Installing libxext (1.3.7-r0)
( 32/119) Installing libxrender (0.9.12-r0)
( 33/119) Installing libpng (1.6.58-r1)
( 34/119) Installing freetype (2.14.3-r0)
( 35/119) Installing fontconfig (2.17.1-r1)
( 36/119) Installing pixman (0.46.4-r0)
( 37/119) Installing cairo (1.18.4-r1)
( 38/119) Installing libintl (1.0-r0)
( 39/119) Installing glib (2.88.1-r1)
( 40/119) Installing cairo-gobject (1.18.4-r1)
( 41/119) Installing expat (2.8.4-r0)
( 42/119) Installing expat-dev (2.8.4-r0)
( 43/119) Installing zlib-dev (1.3.2-r0)
( 44/119) Installing libpng-dev (1.6.58-r1)
( 45/119) Installing freetype-dev (2.14.3-r0)
( 46/119) Installing fontconfig-dev (2.17.1-r1)
( 47/119) Installing libxml2 (2.13.9-r2)
( 48/119) Installing libxml2-utils (2.13.9-r2)
( 49/119) Installing docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.post-install
( 50/119) Installing libxslt (1.1.43-r3)
( 51/119) Installing docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.post-install
( 52/119) Installing docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.post-install
( 53/119) Installing docbook-xsl (1.79.2-r13)
( 54/119) Installing xz (5.8.3-r0)
( 55/119) Installing gettext-asprintf (1.0-r0)
( 56/119) Installing gettext-libs (1.0-r0)
( 57/119) Installing gettext-envsubst (1.0-r0)
( 58/119) Installing gettext (1.0-r0)
( 59/119) Installing gettext-dev (1.0-r0)
( 60/119) Installing py3-parsing (3.3.2-r1)
( 61/119) Installing py3-parsing-pyc (3.3.2-r1)
( 62/119) Installing py3-packaging (26.2-r0)
( 63/119) Installing py3-packaging-pyc (26.2-r0)
( 64/119) Installing linux-headers (7.0.0-r1)
( 65/119) Installing libffi-dev (3.5.2-r1)
( 66/119) Installing bsd-compat-headers (0.7.2-r6)
( 67/119) Installing libformw (6.6_p20260516-r0)
( 68/119) Installing libmenuw (6.6_p20260516-r0)
( 69/119) Installing libncurses++ (6.6_p20260516-r0)
( 70/119) Installing ncurses-dev (6.6_p20260516-r0)
( 71/119) Installing libedit-dev (20260508.3.1-r1)
( 72/119) Installing libpcre2-16 (10.48-r0)
( 73/119) Installing libpcre2-32 (10.48-r0)
( 74/119) Installing pcre2-dev (10.48-r0)
( 75/119) Installing liblastlog2 (2.42.1-r0)
( 76/119) Installing sqlite (3.53.4-r0)
( 77/119) Installing sqlite-dev (3.53.4-r0)
( 78/119) Installing util-linux-dev (2.42.1-r0)
( 79/119) Installing glib-dev (2.88.1-r1)
( 80/119) Installing pixman-dev (0.46.4-r0)
( 81/119) Installing xorgproto (2025.1-r0)
( 82/119) Installing libxau-dev (1.0.12-r0)
( 83/119) Installing xcb-proto (1.17.0-r1)
( 84/119) Installing xcb-proto-pyc (1.17.0-r1)
( 85/119) Installing libxdmcp-dev (1.1.5-r1)
( 86/119) Installing libxcb-dev (1.17.0-r2)
( 87/119) Installing xtrans (1.6.0-r0)
( 88/119) Installing libx11-dev (1.8.13-r0)
( 89/119) Installing libxext-dev (1.3.7-r0)
( 90/119) Installing libxrender-dev (0.9.12-r0)
( 91/119) Installing cairo-dev (1.18.4-r1)
( 92/119) Installing cairo-static (1.18.4-r1)
( 93/119) Installing acl-libs (2.3.2-r1)
( 94/119) Installing lz4-libs (1.10.0-r1)
( 95/119) Installing libarchive (3.8.7-r0)
( 96/119) Installing rhash-libs (1.4.6-r0)
( 97/119) Installing libuv (1.52.1-r0)
( 98/119) Installing cmake (4.2.3-r0)
( 99/119) Installing expat-static (2.8.4-r0)
(100/119) Installing fontconfig-static (2.17.1-r1)
(101/119) Installing freetype-static (2.14.3-r0)
(102/119) Installing oniguruma (6.9.10-r0)
(103/119) Installing jq (1.8.2-r0)
(104/119) Installing jq-dev (1.8.2-r0)
(105/119) Installing libpng-static (1.6.58-r1)
(106/119) Installing libvterm (0.3.3-r0)
(107/119) Installing libvterm-dev (0.3.3-r0)
(108/119) Installing libvterm-static (0.3.3-r0)
(109/119) Installing libsharpyuv (1.6.0-r0)
(110/119) Installing libwebp (1.6.0-r0)
(111/119) Installing libwebpdecoder (1.6.0-r0)
(112/119) Installing libwebpdemux (1.6.0-r0)
(113/119) Installing libwebpmux (1.6.0-r0)
(114/119) Installing libwebp-dev (1.6.0-r0)
(115/119) Installing libwebp-static (1.6.0-r0)
(116/119) Installing ncurses-static (6.6_p20260516-r0)
(117/119) Installing oniguruma-dev (6.9.10-r0)
(118/119) Installing pixman-static (0.46.4-r0)
(119/119) Installing zlib-static (1.3.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing glib-2.88.1-r1.trigger
* No schema files found: doing nothing.
OK: 621.0 MiB in 333 packages
+ cmake -B build
-- The CXX compiler identification is GNU 15.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for modules 'vterm;cairo;libwebp;libwebpmux;libjq;oniguruma'
-- Found vterm, version 0.3.3
-- Found cairo, version 1.18.4
-- Found libwebp, version 1.6.0
-- Found libwebpmux, version 1.6.0
-- Found libjq, version 1.8.2
-- Found oniguruma, version 6.9.10
-- Checking for one of the modules 'tinfo;ncursesw;ncurses'
-- Configuring done (9.0s)
-- Generating done (0.4s)
-- Build files have been written to: /home/ci/asciicast2webp/build
+ cmake --build build -- package
[ 50%] Building CXX object CMakeFiles/asciicast2webp.dir/asciicast2webp.cpp.o
[100%] Linking CXX executable asciicast2webp
[100%] Built target asciicast2webp
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: asciicast2webp
CPack: - Install project: asciicast2webp []
CPack: Create package
CPack: - package: /home/ci/asciicast2webp/build/asciicast2webp-1.0.0-3-g9617557-Linux-aarch64.tar.gz generated.
+ doas sed -i -E 's/, (x11|xext|xrender|xcb(-render|-shm)?)( >= +[^,]+)?//g' /usr/lib/pkgconfig/cairo.pc
+ cmake -S . -B build-static '-DCMAKE_BUILD_TYPE=Release' '-DCMAKE_EXE_LINKER_FLAGS=-static -w' '-DCPACK_STRIP_FILES=YES' '-DCMAKE_INSTALL_PREFIX=/' '-DCMAKE_INSTALL_BINDIR=/' '-DCMAKE_INSTALL_MANDIR=/man' '-DCMAKE_INSTALL_DOCDIR=/doc'
-- The CXX compiler identification is GNU 15.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for modules 'vterm;cairo;libwebp;libwebpmux;libjq;oniguruma'
-- Found vterm, version 0.3.3
-- Found cairo, version 1.18.4
-- Found libwebp, version 1.6.0
-- Found libwebpmux, version 1.6.0
-- Found libjq, version 1.8.2
-- Found oniguruma, version 6.9.10
-- Checking for one of the modules 'tinfo;ncursesw;ncurses'
-- Configuring done (7.2s)
-- Generating done (0.4s)
-- Build files have been written to: /home/ci/asciicast2webp/build-static
+ sed -i 's/"asciicast2webp-/&static-/' build-static/CPackConfig.cmake
+ cmake --build build-static -- package
[ 50%] Building CXX object CMakeFiles/asciicast2webp.dir/asciicast2webp.cpp.o
[100%] Linking CXX executable asciicast2webp
[100%] Built target asciicast2webp
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: asciicast2webp
CPack: - Install project: asciicast2webp []
CPack: Create package
CPack: - package: /home/ci/asciicast2webp/build-static/asciicast2webp-static-1.0.0-3-g9617557-Linux-aarch64.tar.gz generated.
+ cmake --build build-static -- test
Running tests...
Test project /home/ci/asciicast2webp/build-static
Start 1: fixture
1/3 Test #1: fixture .......................... Passed 0.54 sec
Start 2: fixture-drop-short
2/3 Test #2: fixture-drop-short ............... Passed 0.33 sec
Start 3: fixture-v3
3/3 Test #3: fixture-v3 ....................... Passed 0.35 sec
100% tests passed, 0 tests failed out of 3
Total Test time (real) = 1.29 sec
+ mv build-static/asciicast2webp-static-1.0.0-3-g9617557-Linux-aarch64.tar.gz /home/ci/acid-deploy
Deploy log
+ mv -- asciicast2webp-static-1.0.0-3-g9617557-Linux-aarch64.tar.gz /home/acid/cd