- Changed
- 96d ago
- Project
- p/ponymap
- Commit
- 02f87e1604bc72fb1d48611bb546ab83ab51633d
- Runner
- Alpine 3.20
- State
- Success
- Notified
- 1
- Duration
- 1m7s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.6.34-1-virt (buildozer@build-3-20-x86_64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #2-Alpine SMP PREEMPT_DYNAMIC Tue, 18 Jun 2024 10:38:37 +0000
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1572022166 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000009] tsc: Detected 1696.073 MHz processor
[ 0.001166] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001213] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001217] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001599] RAMDISK: [mem 0x7f6be000-0x7ffd9fff]
[ 0.001603] ACPI: Early table checksum verification disabled
[ 0.001608] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[ 0.001615] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001624] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001634] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001640] ACPI: FACS 0x000000007FFE0000 000040
[ 0.001646] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001652] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001657] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001662] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[ 0.001664] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[ 0.001666] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.001667] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[ 0.001668] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[ 0.001669] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[ 0.002164] Zone ranges:
[ 0.002166] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.002169] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.002172] Normal empty
[ 0.002173] Movable zone start for each node
[ 0.002174] Early memory node ranges
[ 0.002175] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.002177] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.002180] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.002565] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002595] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.012579] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.013303] ACPI: PM-Timer IO Port: 0x608
[ 0.013325] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.013391] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.013396] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013399] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.013402] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013403] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.013405] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.013413] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013415] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013422] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.013448] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.013472] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.013474] Booting paravirtualized kernel on KVM
[ 0.013476] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.020981] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.021618] percpu: Embedded 57 pages/cpu s195560 r8192 d29720 u1048576
[ 0.021668] kvm-guest: PV spinlocks disabled, no host support
[ 0.021669] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.021748] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.022323] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.022811] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.022917] Built 1 zonelists, mobility grouping on. Total pages: 515802
[ 0.023560] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.030215] Memory: 2012820K/2096608K available (14336K kernel code, 1799K rwdata, 8232K rodata, 2696K init, 2032K bss, 83528K reserved, 0K cma-reserved)
[ 0.041098] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.041248] Kernel/User page tables isolation: enabled
[ 0.042485] Dynamic Preempt: none
[ 0.042626] rcu: Preemptible hierarchical RCU implementation.
[ 0.042628] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.042630] Trampoline variant of Tasks RCU enabled.
[ 0.042630] Tracing variant of Tasks RCU enabled.
[ 0.042631] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.042633] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.047643] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.047888] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.048086] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.056854] Console: colour VGA+ 80x25
[ 0.056920] printk: console [ttyS0] enabled
[ 0.206022] ACPI: Core revision 20230628
[ 0.207584] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.210033] APIC: Switch to symmetric I/O mode setup
[ 0.211723] x2apic enabled
[ 0.212945] APIC: Switched APIC routing to: physical x2apic
[ 0.216285] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.217857] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.220527] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960730)
[ 0.222703] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.223993] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.225462] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.227541] Spectre V2 : Mitigation: Retpolines
[ 0.228657] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.230527] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.232169] Speculative Store Bypass: Vulnerable
[ 0.233295] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.234884] MMIO Stale Data: Unknown: No mitigations
[ 0.236092] x86/fpu: x87 FPU will use FXSAVE
[ 0.260342] Freeing SMP alternatives memory: 32K
[ 0.260530] pid_max: default: 32768 minimum: 301
[ 0.262609] LSM: initializing lsm=lockdown,capability,landlock,integrity
[ 0.265812] landlock: Up and running.
[ 0.266983] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.268804] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.392959] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.395630] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.397378] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.399267] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.400522] signal: max sigframe size: 1440
[ 0.400522] rcu: Hierarchical SRCU implementation.
[ 0.400525] rcu: Max phase no-delay instances is 1000.
[ 0.402264] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.403799] smp: Bringing up secondary CPUs ...
[ 0.405095] smpboot: x86: Booting SMP configuration:
[ 0.406325] .... node #0, CPUs: #1
[ 0.420573] smp: Brought up 1 node, 2 CPUs
[ 0.422536] smpboot: Max logical packages: 1
[ 0.423597] ----------------
[ 0.424308] | NMI testsuite:
[ 0.425017] --------------------
[ 0.425822] remote IPI: ok |
[ 0.426735] local IPI: ok |
[ 0.427544] --------------------
[ 0.428392] Good, all 2 testcases passed! |
[ 0.429583] ---------------------------------
[ 0.430531] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.432843] devtmpfs: initialized
[ 0.432843] x86/mm: Memory block size: 128MB
[ 0.433153] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.433189] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.442354] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.444021] audit: initializing netlink subsys (disabled)
[ 0.445407] audit: type=2000 audit(1735231168.389:1): state=initialized audit_enabled=0 res=1
[ 0.445407] thermal_sys: Registered thermal governor 'step_wise'
[ 0.445407] cpuidle: using governor ladder
[ 0.450546] cpuidle: using governor menu
[ 0.451671] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.453677] PCI: Using configuration type 1 for base access
[ 0.455246] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.461319] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.463573] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.467125] ACPI: Added _OSI(Module Device)
[ 0.468530] ACPI: Added _OSI(Processor Device)
[ 0.469746] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.470548] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.472716] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.475713] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.475713] ACPI: Interpreter enabled
[ 0.475713] ACPI: PM: (supports S0 S3 S5)
[ 0.475713] ACPI: Using IOAPIC for interrupt routing
[ 0.480553] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.482806] PCI: Using E820 reservations for host bridge windows
[ 0.484547] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.488994] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.490535] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.492682] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.495328] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.498600] acpiphp: Slot [3] registered
[ 0.500546] acpiphp: Slot [4] registered
[ 0.501601] acpiphp: Slot [5] registered
[ 0.502592] acpiphp: Slot [6] registered
[ 0.503599] acpiphp: Slot [7] registered
[ 0.504588] acpiphp: Slot [8] registered
[ 0.505573] acpiphp: Slot [9] registered
[ 0.506586] acpiphp: Slot [10] registered
[ 0.507590] acpiphp: Slot [11] registered
[ 0.508677] acpiphp: Slot [12] registered
[ 0.509702] acpiphp: Slot [13] registered
[ 0.510556] acpiphp: Slot [14] registered
[ 0.511560] acpiphp: Slot [15] registered
[ 0.512563] acpiphp: Slot [16] registered
[ 0.513924] acpiphp: Slot [17] registered
[ 0.515257] acpiphp: Slot [18] registered
[ 0.516426] acpiphp: Slot [19] registered
[ 0.517560] acpiphp: Slot [20] registered
[ 0.518756] acpiphp: Slot [21] registered
[ 0.519824] acpiphp: Slot [22] registered
[ 0.520557] acpiphp: Slot [23] registered
[ 0.521566] acpiphp: Slot [24] registered
[ 0.522598] acpiphp: Slot [25] registered
[ 0.523599] acpiphp: Slot [26] registered
[ 0.524606] acpiphp: Slot [27] registered
[ 0.525722] acpiphp: Slot [28] registered
[ 0.526749] acpiphp: Slot [29] registered
[ 0.527827] acpiphp: Slot [30] registered
[ 0.528982] acpiphp: Slot [31] registered
[ 0.530561] PCI host bridge to bus 0000:00
[ 0.531696] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.533577] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.535438] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.537533] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.539591] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.540528] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.541969] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.544162] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.546707] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.553473] pci 0000:00:01.1: reg 0x20: [io 0xc120-0xc12f]
[ 0.556818] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.558839] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.560528] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.562253] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.564177] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.566405] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.568366] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.570933] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.578412] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.583547] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 0.594648] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.596775] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.600922] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.604021] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc11f]
[ 0.607641] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 0.614618] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.619634] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.622355] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.625844] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.631386] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 0.640531] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.646969] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.650303] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0ff]
[ 0.653604] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[ 0.666118] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.673507] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.675852] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.678465] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.680713] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.682478] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.684715] iommu: Default domain type: Translated
[ 0.686065] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.688085] SCSI subsystem initialized
[ 0.689105] pps_core: LinuxPPS API ver. 1 registered
[ 0.690538] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.693063] PTP clock support registered
[ 0.694185] PCI: Using ACPI for IRQ routing
[ 0.694185] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.694185] clocksource: Switched to clocksource kvm-clock
[ 0.694673] VFS: Disk quotas dquot_6.6.0
[ 0.695456] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.697992] pnp: PnP ACPI init
[ 0.699600] pnp: PnP ACPI: found 6 devices
[ 0.711468] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.714854] NET: Registered PF_INET protocol family
[ 0.717039] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.721039] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.723833] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.725791] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.727807] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.729774] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.732304] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.734987] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.737311] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.739967] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.741977] NET: Registered PF_XDP protocol family
[ 0.743702] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.745873] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.747557] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.749294] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.751164] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.753705] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.755729] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.757558] PCI: CLS 0 bytes, default 64
[ 0.758738] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.758833] Unpacking initramfs...
[ 0.762770] Initialise system trusted keyrings
[ 0.765311] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.767590] zbud: loaded
[ 0.768676] Key type asymmetric registered
[ 0.770156] Asymmetric key parser 'x509' registered
[ 0.771929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.774624] io scheduler mq-deadline registered
[ 0.776213] io scheduler kyber registered
[ 0.777704] io scheduler bfq registered
[ 0.783064] ERST DBG: ERST support is disabled.
[ 0.808819] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.836167] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.863546] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.866546] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.868570] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.872162] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.875033] scsi host0: ata_piix
[ 0.876303] scsi host1: ata_piix
[ 0.877320] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 0.879230] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 0.881338] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.884715] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.886115] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.887576] rtc_cmos 00:05: RTC can wake from S4
[ 0.890735] rtc_cmos 00:05: registered as rtc0
[ 0.892129] rtc_cmos 00:05: setting system clock to 2024-12-26T16:39:28 UTC (1735231168)
[ 0.894530] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.896660] intel_pstate: CPU model not supported
[ 0.898170] gre: GRE over IPv4 demultiplexor driver
[ 0.907802] Freeing initrd memory: 9328K
[ 0.915124] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.919842] NET: Registered PF_INET6 protocol family
[ 0.921798] Segment Routing with IPv6
[ 0.922775] In-situ OAM (IOAM) with IPv6
[ 0.924017] Key type dns_resolver registered
[ 0.925311] IPI shorthand broadcast: enabled
[ 0.928816] sched_clock: Marking stable (771377990, 152623595)->(934689806, -10688221)
[ 0.936036] registered taskstats version 1
[ 0.937320] Loading compiled-in X.509 certificates
[ 0.946067] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.951011] Key type .fscrypt registered
[ 0.952111] Key type fscrypt-provisioning registered
[ 1.053288] ata2: found unknown device (class 0)
[ 1.055331] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.058545] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.115221] Freeing unused kernel image (initmem) memory: 2696K
[ 1.116397] Write protecting the kernel read-only data: 24576k
[ 1.118336] Freeing unused kernel image (rodata/data gap) memory: 2008K
[ 1.119693] rodata_test: all tests were successful
[ 1.120561] Run /init as init process
[ 1.135708] Alpine Init 3.10.1-r0
Alpine Init 3.10.1-r0
[ 1.136924] Loading boot drivers...
* Loading boot drivers: [ 1.183376] ACPI: bus type USB registered
[ 1.184361] usbcore: registered new interface driver usbfs
[ 1.185484] usbcore: registered new interface driver hub
[ 1.186571] usbcore: registered new device driver usb
[ 1.193463] usbcore: registered new interface driver usb-storage
[ 1.384844] loop: module loaded
[ 1.431471] ACPI: bus type drm_connector registered
[ 1.471820] Loading boot drivers: ok.
ok.
[ 1.475703] Mounting root...
* Mounting root: [ 1.496487] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.520024] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.520932] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.524669] [drm] Found EDID data blob.
[ 1.525980] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 1.541450] Console: switching to colour frame buffer device 160x50
[ 1.544732] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.674455] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.677648] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.781964] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 1.789141] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.799576] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 1.803531] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.991040] block sr0: the capability attribute has been deprecated.
[ 4.920194] EXT4-fs (vda): mounted filesystem 0487f251-c6cb-4a79-b6c6-03b1b5c178de ro with ordered data mode. Quota mode: none.
[ 4.923130] Mounting root: ok.
ok.
OpenRC 0.54 is starting up Linux 6.6.34-1-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5560/50200 files, 163595/200704 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 24.1.3 running 'init-local' at Thu, 26 Dec 2024 16:39:38 +0000. Up 10.53 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ... [ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 24.1.3 running 'init' at Thu, 26 Dec 2024 16:39:49 +0000. Up 22.48 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::5054:ff:fe12:3456/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:h5d8zi7VbzsXt/Zh9gJZnyIkbyE/pv0jXh7Nt65fPqo root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| |
| |
| |
| = + . |
| S @ o+ ..|
| o @+.+oo|
| =.=+.B*|
| ..+o.=*X|
| .E==BBX|
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:yxVOy1D8nhYxHpoQkbJR3lqKCesRmBobWOql9FexWZA root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| . +**. |
|.o o oEBo. + |
|=.o.o Bo.== + |
|o=+ +oo Ooo+ |
|oo .o.o S =. o |
| ... . o + |
| . o . |
| |
| |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:pwR30oZ/4VktYnusnzL+DUTdM3gRGqWWB3vE7Tp+7YA root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| oo=o|
| o X++|
| . + + +B+B+|
| o = o.O+.+|
| S o = +. |
| . o . =o |
| . E.o..|
| o..=o|
| ..++oo|
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 24.1.3 running 'modules:config' at Thu, 26 Dec 2024 16:39:51 +0000. Up 24.42 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 24.1.3 running 'modules:final' at Thu, 26 Dec 2024 16:39:53 +0000. Up 25.86 seconds.
2024-12-26 16:39:53,598 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240705-r0)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
OK: 144 MiB in 151 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:yxVOy1D8nhYxHpoQkbJR3lqKCesRmBobWOql9FexWZA root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:pwR30oZ/4VktYnusnzL+DUTdM3gRGqWWB3vE7Tp+7YA root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:h5d8zi7VbzsXt/Zh9gJZnyIkbyE/pv0jXh7Nt65fPqo root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBAw9afwMhMiJWUpfex3/NrLHbcW7DyYem5q0r0mcD/c3rabvblW6cMyj+dcLmdwFwcdtSW/JVPMfajZmD0/D6BM= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFvOEJnNNfImMpZdH+lXWK1IbY+p+yYiua+NLls/3Hbr root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.1.3 finished at Thu, 26 Dec 2024 16:39:56 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net]. Up 29.09 seconds
[ ok ]
Welcome to Alpine Linux 3.20
Kernel 6.6.34-1-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
............
status: done
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.4-r0 -> 2.14.4-r1)
Executing busybox-1.36.1-r29.trigger
Continuing the upgrade transaction with new apk-tools:
(1/30) Upgrading alpine-conf (3.18.1-r0 -> 3.18.1-r1)
(2/30) Upgrading alpine-release (3.20.1-r0 -> 3.20.3-r0)
(3/30) Upgrading ca-certificates-bundle (20240226-r0 -> 20240705-r0)
(4/30) Upgrading libcrypto3 (3.3.1-r0 -> 3.3.2-r1)
(5/30) Upgrading libssl3 (3.3.1-r0 -> 3.3.2-r1)
(6/30) Upgrading alpine-base (3.20.1-r0 -> 3.20.3-r0)
(7/30) Upgrading ncurses-terminfo-base (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(8/30) Upgrading libncursesw (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(9/30) Upgrading libexpat (2.6.2-r0 -> 2.6.4-r0)
(10/30) Upgrading xz-libs (5.6.1-r3 -> 5.6.2-r0)
(11/30) Upgrading libpanelw (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(12/30) Upgrading python3 (3.12.3-r1 -> 3.12.8-r1)
(13/30) Upgrading python3-pycache-pyc0 (3.12.3-r1 -> 3.12.8-r1)
(14/30) Upgrading pyc (3.12.3-r1 -> 3.12.8-r1)
(15/30) Upgrading py3-jinja2 (3.1.4-r0 -> 3.1.5-r0)
(16/30) Upgrading py3-jinja2-pyc (3.1.4-r0 -> 3.1.5-r0)
(17/30) Upgrading py3-requests (2.31.0-r2 -> 2.32.3-r0)
(18/30) Upgrading py3-requests-pyc (2.31.0-r2 -> 2.32.3-r0)
(19/30) Upgrading tzdata (2024a-r1 -> 2024b-r0)
(20/30) Upgrading python3-pyc (3.12.3-r1 -> 3.12.8-r1)
(21/30) Upgrading linux-virt (6.6.34-r1 -> 6.6.67-r0)
(22/30) Upgrading openssh-keygen (9.7_p1-r3 -> 9.7_p1-r4)
(23/30) Upgrading openssh-client-common (9.7_p1-r3 -> 9.7_p1-r4)
(24/30) Upgrading openssh-client-default (9.7_p1-r3 -> 9.7_p1-r4)
(25/30) Upgrading openssh-sftp-server (9.7_p1-r3 -> 9.7_p1-r4)
(26/30) Upgrading openssh-server-common (9.7_p1-r3 -> 9.7_p1-r4)
(27/30) Upgrading openssh-server-common-openrc (9.7_p1-r3 -> 9.7_p1-r4)
(28/30) Upgrading openssh-server (9.7_p1-r3 -> 9.7_p1-r4)
(29/30) Upgrading openssh (9.7_p1-r3 -> 9.7_p1-r4)
(30/30) Upgrading openssh-server-pam (9.7_p1-r3 -> 9.7_p1-r4)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
Executing kmod-32-r0.trigger
Executing mkinitfs-3.10.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.67-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 144 MiB in 151 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.33.1-r0)
(3/10) Installing nghttp2-libs (1.62.1-r0)
(4/10) Installing libpsl (0.21.5-r1)
(5/10) Installing libcurl (8.11.1-r0)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.45.2-r0)
(8/10) Installing git-init-template (2.45.2-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r29.trigger
OK: 154 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/ponymap.git ponymap
Cloning into 'ponymap'...
remote: Enumerating objects: 521, done.
remote: Counting objects: 100% (22/22), done.
remote: Compressing objects: 100% (22/22), done.
remote: Total 521 (delta 9), reused 0 (delta 0), pack-reused 499 (from 1)
Receiving objects: 100% (521/521), 153.42 KiB | 4.79 MiB/s, done.
Resolving deltas: 100% (346/346), done.
Submodule 'http-parser' (https://github.com/nodejs/http-parser.git) registered for path 'http-parser'
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Cloning into '/home/ci/ponymap/http-parser'...
remote: Enumerating objects: 1675, done.
remote: Total 1675 (delta 0), reused 0 (delta 0), pack-reused 1675 (from 1)
Receiving objects: 100% (1675/1675), 821.20 KiB | 2.47 MiB/s, done.
Resolving deltas: 100% (1044/1044), done.
Cloning into '/home/ci/ponymap/liberty'...
remote: Enumerating objects: 789, done.
remote: Counting objects: 100% (258/258), done.
remote: Compressing objects: 100% (255/255), done.
remote: Total 789 (delta 156), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (789/789), 394.76 KiB | 6.58 MiB/s, done.
Resolving deltas: 100% (477/477), done.
Submodule path 'http-parser': checked out 'ec8b5ee63f0e51191ea43bb0c6eac7bfbff3141d'
Submodule path 'liberty': checked out '49d7cb12bb2f47216528ea6d6f58869e0cf12a2e'
+ cd ponymap
+ git -c 'advice.detachedHead=false' checkout 02f87e1604bc72fb1d48611bb546ab83ab51633d
HEAD is now at 02f87e1 Bump liberty
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=02f87e1
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/02f87e1/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake help2man ncurses-dev jansson-dev openssl-dev lua5.4-dev
(1/37) Installing jansson (2.14-r4)
(2/37) Installing binutils (2.42-r0)
(3/37) Installing libmagic (5.45-r1)
(4/37) Installing file (5.45-r1)
(5/37) Installing libgomp (13.2.1_git20240309-r0)
(6/37) Installing libatomic (13.2.1_git20240309-r0)
(7/37) Installing isl26 (0.26-r1)
(8/37) Installing mpfr4 (4.2.1-r0)
(9/37) Installing mpc1 (1.3.1-r1)
(10/37) Installing gcc (13.2.1_git20240309-r0)
(11/37) Installing libstdc++-dev (13.2.1_git20240309-r0)
(12/37) Installing musl-dev (1.2.5-r0)
(13/37) Installing g++ (13.2.1_git20240309-r0)
(14/37) Installing make (4.4.1-r2)
(15/37) Installing fortify-headers (1.1-r3)
(16/37) Installing patch (2.7.6-r10)
(17/37) Installing build-base (0.5-r3)
(18/37) Installing lz4-libs (1.9.4-r5)
(19/37) Installing libarchive (3.7.7-r0)
(20/37) Installing rhash-libs (1.4.4-r0)
(21/37) Installing libuv (1.48.0-r0)
(22/37) Installing cmake (3.29.3-r0)
(23/37) Installing perl (5.38.2-r0)
(24/37) Installing perl-error (0.17029-r2)
(25/37) Installing perl-git (2.45.2-r0)
(26/37) Installing git-perl (2.45.2-r0)
(27/37) Installing help2man (1.49.3-r0)
(28/37) Installing pkgconf (2.2.0-r0)
(29/37) Installing jansson-dev (2.14-r4)
(30/37) Installing lua5.4-libs (5.4.6-r1)
(31/37) Installing lua5.4 (5.4.6-r1)
(32/37) Installing lua5.4-dev (5.4.6-r1)
(33/37) Installing libformw (6.4_p20240420-r2)
(34/37) Installing libmenuw (6.4_p20240420-r2)
(35/37) Installing libncurses++ (6.4_p20240420-r2)
(36/37) Installing ncurses-dev (6.4_p20240420-r2)
(37/37) Installing openssl-dev (3.3.2-r1)
Executing busybox-1.36.1-r29.trigger
OK: 471 MiB in 198 packages
+ cmake -B build
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found Curses: /usr/lib/libcurses.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Found Ncursesw: ncursesw
-- Checking for module 'jansson'
-- Found jansson, version 2.14
-- Checking for modules 'libssl;libcrypto'
-- Found libssl, version 3.3.2
-- Found libcrypto, version 3.3.2
-- Checking for one of the modules 'lua5.3;lua-5.3;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (1.7s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/ponymap/build
+ cmake --build build -- package
[ 8%] Building C object CMakeFiles/ponymap.dir/ponymap.c.o
[ 16%] Linking C executable ponymap
[ 16%] Built target ponymap
[ 25%] Building C object CMakeFiles/plugin-http.dir/plugins/http.c.o
[ 33%] Building C object CMakeFiles/plugin-http.dir/http-parser/http_parser.c.o
[ 41%] Linking C shared library http.so
[ 41%] Built target plugin-http
[ 50%] Building C object CMakeFiles/plugin-irc.dir/plugins/irc.c.o
[ 58%] Linking C shared library irc.so
[ 58%] Built target plugin-irc
[ 66%] Building C object CMakeFiles/plugin-ssh.dir/plugins/ssh.c.o
[ 75%] Linking C shared library ssh.so
[ 75%] Built target plugin-ssh
[ 83%] Building C object CMakeFiles/plugin-lua-loader.dir/plugins/lua-loader.c.o
[ 91%] Linking C shared library lua-loader.so
[ 91%] Built target plugin-lua-loader
[100%] Generating man page for ponymap
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: ponymap
CPack: - Install project: ponymap []
CPack: Create package
CPack: - package: /home/ci/ponymap/build/ponymap-02f87e1-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: ponymap
CPack: - Install project: ponymap []
CPack: Create package
CPack: - package: /home/ci/ponymap/build/ponymap-02f87e1-Linux-x86_64.zip generated.
Deploy log