Tasks » 152

Project: p/nncmpp
Commit: 9d0acddf9a0e31f86da1064bd1cf6e8ed8e277ae
Runner: Alpine 3.20
State: Success
Notified: 1

Runner log

+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/      /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7l[2J[0mSeaBIOS (version Arch Linux 1.16.3-1-1)


iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
                                                                               


Booting from Hard Disk...

SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
[2Je%@)0(B[0;37;40m[?25l[2J[23;16HAlpine will be booted automatically in [0;1m1[0m seconds[23;16H[0;37;40mAlpine will be booted automatically in [0;1;37;40m1[0;37;40m seconds..[23;16H                                                 [23;16H[0;37;40m                                                  [?25h[24;1H[0m 
Loading vmlinuz-virt...Loading vmlinuz-virt...  ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk

c[?7l[2J[    0.000000] Linux version 6.6.34-1-virt (buildozer@build-3-20-x86_64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #2-Alpine SMP PREEMPT_DYNAMIC Tue, 18 Jun 2024 10:38:37 +0000
[    0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 1595015338 cycles
[    0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000008] tsc: Detected 1696.074 MHz processor
[    0.001178] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[    0.001225] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.001229] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001474] RAMDISK: [mem 0x7f6be000-0x7ffd9fff]
[    0.001478] ACPI: Early table checksum verification disabled
[    0.001483] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[    0.001490] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001499] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001508] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001515] ACPI: FACS 0x000000007FFE0000 000040
[    0.001520] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001526] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001532] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001537] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[    0.001539] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[    0.001541] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[    0.001542] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[    0.001543] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[    0.001544] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[    0.002034] Zone ranges:
[    0.002036]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002039]   DMA32    [mem 0x0000000001000000-0x000000007ffd9fff]
[    0.002041]   Normal   empty
[    0.002043] Movable zone start for each node
[    0.002044] Early memory node ranges
[    0.002045]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002047]   node   0: [mem 0x0000000000100000-0x000000007ffd9fff]
[    0.002049] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[    0.002435] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.002465] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.012458] On node 0, zone DMA32: 38 pages in unavailable ranges
[    0.013178] ACPI: PM-Timer IO Port: 0x608
[    0.013198] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.013263] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.013269] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.013272] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.013274] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.013276] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.013278] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.013286] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.013288] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.013295] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.013321] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.013345] [mem 0x80000000-0xfeffbfff] available for PCI devices
[    0.013347] Booting paravirtualized kernel on KVM
[    0.013349] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.020873] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.021508] percpu: Embedded 57 pages/cpu s195560 r8192 d29720 u1048576
[    0.021556] kvm-guest: PV spinlocks disabled, no host support
[    0.021557] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[    0.021636] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[    0.022213] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.022697] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.022800] Built 1 zonelists, mobility grouping on.  Total pages: 515802
[    0.023442] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.030030] Memory: 2012824K/2096608K available (14336K kernel code, 1799K rwdata, 8232K rodata, 2696K init, 2032K bss, 83524K reserved, 0K cma-reserved)
[    0.040896] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.041043] Kernel/User page tables isolation: enabled
[    0.042277] Dynamic Preempt: none
[    0.042418] rcu: Preemptible hierarchical RCU implementation.
[    0.042420] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.042422] 	Trampoline variant of Tasks RCU enabled.
[    0.042422] 	Tracing variant of Tasks RCU enabled.
[    0.042423] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.042425] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.047470] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[    0.047733] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.047931] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.056737] Console: colour VGA+ 80x25
[    0.056802] printk: console [ttyS0] enabled
[    0.225983] ACPI: Core revision 20230628
[    0.227644] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.230348] APIC: Switch to symmetric I/O mode setup
[    0.232194] x2apic enabled
[    0.233515] APIC: Switched APIC routing to: physical x2apic
[    0.237059] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.238794] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[    0.241613] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960740)
[    0.243777] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.245095] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.246539] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.248623] Spectre V2 : Mitigation: Retpolines
[    0.249726] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.251613] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.253474] Speculative Store Bypass: Vulnerable
[    0.254710] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.256296] MMIO Stale Data: Unknown: No mitigations
[    0.257527] x86/fpu: x87 FPU will use FXSAVE
[    0.282480] Freeing SMP alternatives memory: 32K
[    0.283644] pid_max: default: 32768 minimum: 301
[    0.285783] LSM: initializing lsm=lockdown,capability,landlock,integrity
[    0.288974] landlock: Up and running.
[    0.290144] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.291617] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.414994] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[    0.418556] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.421047] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.421608] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[    0.421655] signal: max sigframe size: 1440
[    0.423188] rcu: Hierarchical SRCU implementation.
[    0.424866] rcu: 	Max phase no-delay instances is 1000.
[    0.427087] NMI watchdog: Perf NMI watchdog permanently disabled
[    0.429249] smp: Bringing up secondary CPUs ...
[    0.431818] smpboot: x86: Booting SMP configuration:
[    0.433550] .... node  #0, CPUs:      #1
[    0.445886] smp: Brought up 1 node, 2 CPUs
[    0.445886] smpboot: Max logical packages: 1
[    0.445886] ----------------
[    0.451616] | NMI testsuite:
[    0.452459] --------------------
[    0.453363]   remote IPI:  ok  |
[    0.454291]    local IPI:  ok  |
[    0.455227] --------------------
[    0.456125] Good, all   2 testcases passed! |
[    0.457336] ---------------------------------
[    0.458558] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[    0.460842] devtmpfs: initialized
[    0.462674] x86/mm: Memory block size: 128MB
[    0.464303] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.464449] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.466965] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.466965] audit: initializing netlink subsys (disabled)
[    0.471663] audit: type=2000 audit(1725306742.960:1): state=initialized audit_enabled=0 res=1
[    0.471740] thermal_sys: Registered thermal governor 'step_wise'
[    0.474652] cpuidle: using governor ladder
[    0.477208] cpuidle: using governor menu
[    0.481768] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.483773] PCI: Using configuration type 1 for base access
[    0.485360] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.488121] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.490050] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.492529] ACPI: Added _OSI(Module Device)
[    0.493725] ACPI: Added _OSI(Processor Device)
[    0.494963] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.496289] ACPI: Added _OSI(Processor Aggregator Device)
[    0.498626] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.501663] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[    0.503457] ACPI: Interpreter enabled
[    0.504499] ACPI: PM: (supports S0 S3 S5)
[    0.505644] ACPI: Using IOAPIC for interrupt routing
[    0.507049] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.509579] PCI: Using E820 reservations for host bridge windows
[    0.511757] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.516194] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.517916] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[    0.520433] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.521631] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[    0.524858] acpiphp: Slot [3] registered
[    0.525851] acpiphp: Slot [4] registered
[    0.526942] acpiphp: Slot [5] registered
[    0.528089] acpiphp: Slot [6] registered
[    0.529212] acpiphp: Slot [7] registered
[    0.531653] acpiphp: Slot [8] registered
[    0.532655] acpiphp: Slot [9] registered
[    0.533646] acpiphp: Slot [10] registered
[    0.534656] acpiphp: Slot [11] registered
[    0.535680] acpiphp: Slot [12] registered
[    0.536700] acpiphp: Slot [13] registered
[    0.537758] acpiphp: Slot [14] registered
[    0.538877] acpiphp: Slot [15] registered
[    0.539916] acpiphp: Slot [16] registered
[    0.540931] acpiphp: Slot [17] registered
[    0.541641] acpiphp: Slot [18] registered
[    0.542646] acpiphp: Slot [19] registered
[    0.543653] acpiphp: Slot [20] registered
[    0.544679] acpiphp: Slot [21] registered
[    0.545685] acpiphp: Slot [22] registered
[    0.546690] acpiphp: Slot [23] registered
[    0.547701] acpiphp: Slot [24] registered
[    0.548718] acpiphp: Slot [25] registered
[    0.549727] acpiphp: Slot [26] registered
[    0.551637] acpiphp: Slot [27] registered
[    0.553040] acpiphp: Slot [28] registered
[    0.554468] acpiphp: Slot [29] registered
[    0.555905] acpiphp: Slot [30] registered
[    0.557339] acpiphp: Slot [31] registered
[    0.558753] PCI host bridge to bus 0000:00
[    0.560177] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.561617] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.563970] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.566569] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.569176] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[    0.571613] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.573597] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.576422] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.579155] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.585431] pci 0000:00:01.1: reg 0x20: [io  0xc120-0xc12f]
[    0.588550] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.590312] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.591613] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.593742] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.595658] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.597868] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.599650] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.602009] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.607379] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.613919] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[    0.628099] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.629950] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.632357] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[    0.635184] pci 0000:00:03.0: reg 0x10: [io  0xc100-0xc11f]
[    0.638743] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.647349] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[    0.652900] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.657058] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.662451] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.665533] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.673221] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[    0.680459] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[    0.683283] pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0ff]
[    0.686255] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.694702] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[    0.702458] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.704968] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.706823] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.708623] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.710196] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[    0.712241] iommu: Default domain type: Translated
[    0.713443] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.715233] SCSI subsystem initialized
[    0.716246] pps_core: LinuxPPS API ver. 1 registered
[    0.716246] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.716246] PTP clock support registered
[    0.721623] PCI: Using ACPI for IRQ routing
[    0.721728] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.723214] clocksource: Switched to clocksource kvm-clock
[    0.726346] VFS: Disk quotas dquot_6.6.0
[    0.727695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.729500] pnp: PnP ACPI init
[    0.730275] pnp: PnP ACPI: found 6 devices
[    0.740542] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.742933] NET: Registered PF_INET protocol family
[    0.744671] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.747790] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.750062] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.752228] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.754305] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.756227] TCP: Hash tables configured (established 16384 bind 16384)
[    0.758028] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[    0.759997] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.762249] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.764371] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.765802] NET: Registered PF_XDP protocol family
[    0.767009] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.768519] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.770045] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.771742] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.773445] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[    0.775292] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.776773] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.778332] PCI: CLS 0 bytes, default 64
[    0.779469] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[    0.779616] Unpacking initramfs...
[    0.783093] Initialise system trusted keyrings
[    0.785911] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.788164] zbud: loaded
[    0.789347] Key type asymmetric registered
[    0.790740] Asymmetric key parser 'x509' registered
[    0.792460] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.795073] io scheduler mq-deadline registered
[    0.796621] io scheduler kyber registered
[    0.798105] io scheduler bfq registered
[    0.804520] ERST DBG: ERST support is disabled.
[    0.843228] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    0.870505] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[    0.900846] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[    0.906133] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.908177] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.911118] VMware PVSCSI driver - version 1.0.7.0-k
[    0.913779] scsi host0: ata_piix
[    0.915047] scsi host1: ata_piix
[    0.916046] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[    0.917927] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[    0.919957] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.924460] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.926183] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.927977] rtc_cmos 00:05: RTC can wake from S4
[    0.931064] rtc_cmos 00:05: registered as rtc0
[    0.932728] rtc_cmos 00:05: setting system clock to 2024-09-02T19:52:23 UTC (1725306743)
[    0.935624] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.938181] intel_pstate: CPU model not supported
[    0.940019] gre: GRE over IPv4 demultiplexor driver
[    0.949885] Freeing initrd memory: 9328K
[    0.961805] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.965826] NET: Registered PF_INET6 protocol family
[    0.967756] Segment Routing with IPv6
[    0.968684] In-situ OAM (IOAM) with IPv6
[    0.969808] Key type dns_resolver registered
[    0.970936] IPI shorthand broadcast: enabled
[    0.975935] sched_clock: Marking stable (800015682, 173864452)->(979273307, -5393173)
[    0.985428] registered taskstats version 1
[    0.987100] Loading compiled-in X.509 certificates
[    0.995327] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[    1.000050] Key type .fscrypt registered
[    1.001022] Key type fscrypt-provisioning registered
[    1.085311] ata2: found unknown device (class 0)
[    1.088341] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.093795] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.138813] Freeing unused kernel image (initmem) memory: 2696K
[    1.141040] Write protecting the kernel read-only data: 24576k
[    1.144615] Freeing unused kernel image (rodata/data gap) memory: 2008K
[    1.147019] rodata_test: all tests were successful
[    1.148632] Run /init as init process
[    1.180141] Alpine Init 3.10.1-r0
Alpine Init 3.10.1-r0
[    1.183661] Loading boot drivers...
 * Loading boot drivers: [    1.265802] ACPI: bus type USB registered
[    1.266782] usbcore: registered new interface driver usbfs
[    1.268130] usbcore: registered new interface driver hub
[    1.269380] usbcore: registered new device driver usb
[    1.277058] usbcore: registered new interface driver usb-storage
[    1.489059] loop: module loaded
[    1.535673] ACPI: bus type drm_connector registered
[    1.575788] Loading boot drivers: ok.
ok.
[    1.579335] Mounting root...
 * Mounting root: [    1.610480] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[    1.634022] [drm] Found bochs VGA, ID 0xb0c5.
[    1.634924] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[    1.638559] [drm] Found EDID data blob.
[    1.639949] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[    1.660058] Console: switching to colour frame buffer device 160x50
[    1.662425] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    1.775751] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.777595] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.895570] virtio_blk virtio1: 2/0/0 default/read/poll queues
[    1.901805] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[    1.911018] virtio_blk virtio2: 2/0/0 default/read/poll queues
[    1.915368] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[    2.099117] block sr0: the capability attribute has been deprecated.
[    4.955957] EXT4-fs (vda): mounted filesystem 0487f251-c6cb-4a79-b6c6-03b1b5c178de ro with ordered data mode. Quota mode: none.
[    4.960918] Mounting root: ok.
ok.

   OpenRC 0.54 is starting up Linux 6.6.34-1-virt (x86_64)

 * /proc is already mounted
 * Mounting /run ... [ ok ]
 * /run/openrc: creating directory
 * /run/lock: creating directory
 * /run/lock: correcting owner
 * Caching service dependencies ... [ ok ]
 * Remounting devtmpfs on /dev ... [ ok ]
 * Mounting /dev/mqueue ... [ ok ]
 * Mounting security filesystem ... [ ok ]
 * Mounting debug filesystem ... [ ok ]
 * Mounting persistent storage (pstore) filesystem ... [ ok ]
 * Starting busybox mdev ... [ ok ]
 * Scanning hardware for mdev ... [ ok ]
 * Loading hardware drivers ... [ ok ]
 * Loading modules ... [ ok ]
 * Setting system clock using the hardware clock [UTC] ... [ ok ]
 * Checking local filesystems  .../: clean, 5560/50200 files, 163595/200704 blocks
 [ ok ]
 * Remounting root filesystem read/write ... [ ok ]
 * Remounting filesystems ... [ ok ]
 * Activating swap devices ... [ ok ]
 * Mounting local filesystems ... [ ok ]
 * Starting busybox acpid ... [ ok ]
 * Configuring kernel parameters ... [ ok ]
 * Migrating /var/lock to /run/lock ... [ ok ]
 * Creating user login records ... [ ok ]
 * Cleaning /tmp directory ... [ ok ]
 * cloud-init local ...Cloud-init v. 24.1.3 running 'init-local' at Mon, 02 Sep 2024 19:52:32 +0000. Up 10.55 seconds.
 [ ok ]
 * Setting hostname ... [ ok ]
 * Starting busybox syslog ... [ ok ]
 * Starting networking ... *   lo ... [ ok ]
 *   eth0 ... [ ok ]
 * Starting chronyd ... [ ok ]
 * Starting cloud-init-hotplugd ... [ ok ]
 * cloud-init init ...Cloud-init v. 24.1.3 running 'init' at Mon, 02 Sep 2024 19:52:45 +0000. Up 23.18 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device |  Up  |          Address           |      Mask     | Scope  |     Hw-Address    |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: |  eth0  | True |         10.0.2.15          | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: |  eth0  | True | fec0::5054:ff:fe12:3456/64 |       .       |  site  | 52:54:00:12:34:56 |
ci-info: |  eth0  | True | fe80::5054:ff:fe12:3456/64 |       .       |  link  | 52:54:00:12:34:56 |
ci-info: |   lo   | True |         127.0.0.1          |   255.0.0.0   |  host  |         .         |
ci-info: |   lo   | True |          ::1/128           |       .       |  host  |         .         |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway  |    Genmask    | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: |   0   |   0.0.0.0   | 10.0.2.2 |    0.0.0.0    |    eth0   |   UG  |
ci-info: |   1   |   10.0.2.0  | 0.0.0.0  | 255.255.255.0 |    eth0   |   U   |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: |   0   |  fe80::/64  |    ::   |    eth0   |   U   |
ci-info: |   1   |  fec0::/64  |    ::   |    eth0   |   Ue  |
ci-info: |   2   |     ::/0    | fe80::2 |    eth0   |  UGe  |
ci-info: |   4   |    local    |    ::   |    eth0   |   U   |
ci-info: |   5   |    local    |    ::   |    eth0   |   U   |
ci-info: |   6   |  multicast  |    ::   |    eth0   |   U   |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:n154gmL5l4TAb25qub6pLzZG5cQ7FLRLuw1KVZWJ39c root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
|     .. .o.o     |
|      .o. o      |
|     o+. . .   . |
|     oBo  . . . E|
|    .=++S.   .   |
|   ...+=+o.o     |
|   .. ==o.=.o    |
|    =.o+o.o+     |
|   o.BB=...      |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:KFadKWyHTGx8SEcaAsXD2OHgGrlHRYOkHjpgnzyWJXQ root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| .+@BE+oo        |
| +++**=*.o       |
|=oo..+O.=        |
|==+ =o +         |
|=..Bo . S        |
| o....           |
|                 |
|                 |
|                 |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:4F6XU+13zT/exz+jYZskLfeKuqhnwbO1uUdxzBKXKB8 root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
|            . .  |
|         . E +   |
|      .   o B .  |
|     . .   * = ..|
|      o S + + . =|
|     . = o o.  .o|
|      . = +o * o.|
|       +.o .B *o=|
|     .+. +=. =ooB|
+----[SHA256]-----+
 [ ok ]
 * cloud-init config ...Cloud-init v. 24.1.3 running 'modules:config' at Mon, 02 Sep 2024 19:52:47 +0000. Up 25.50 seconds.
 [ ok ]
 * cloud-init final ...Cloud-init v. 24.1.3 running 'modules:final' at Mon, 02 Sep 2024 19:52:49 +0000. Up 26.74 seconds.
2024-09-02 19:52:49,263 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240705-r0)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
OK: 144 MiB in 151 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: |   Keytype   |                                       Fingerprint (sha256)                                      | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 |    -    |   acid  |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:KFadKWyHTGx8SEcaAsXD2OHgGrlHRYOkHjpgnzyWJXQ root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:4F6XU+13zT/exz+jYZskLfeKuqhnwbO1uUdxzBKXKB8 root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:n154gmL5l4TAb25qub6pLzZG5cQ7FLRLuw1KVZWJ39c root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBA/v0HFcrPsbYlrxD6F53aMGMsicyLEz8nhPtu1pEFZ9/3VXcXYdJggFmyIh2ajnXm6zOfKusU6i2CS0AfItmsI= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINFxrnSg2kwhQj2MutalLDqaH0LIDm18S+BUdXWKFgzX root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.1.3 finished at Mon, 02 Sep 2024 19:52:51 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net].  Up 29.01 seconds
 [ ok ]

Welcome to Alpine Linux 3.20
Kernel 6.6.34-1-virt on an x86_64 (/dev/ttyS0)

alpine-ci login:

Task log

.........
status: done
+ doas apk upgrade --no-interactive
(1/22) Upgrading alpine-release (3.20.1-r0 -> 3.20.2-r0)
(2/22) Upgrading ca-certificates-bundle (20240226-r0 -> 20240705-r0)
(3/22) Upgrading libcrypto3 (3.3.1-r0 -> 3.3.1-r3)
(4/22) Upgrading libssl3 (3.3.1-r0 -> 3.3.1-r3)
(5/22) Upgrading alpine-base (3.20.1-r0 -> 3.20.2-r0)
(6/22) Upgrading xz-libs (5.6.1-r3 -> 5.6.2-r0)
(7/22) Upgrading python3 (3.12.3-r1 -> 3.12.3-r2)
(8/22) Upgrading python3-pycache-pyc0 (3.12.3-r1 -> 3.12.3-r2)
(9/22) Upgrading pyc (3.12.3-r1 -> 3.12.3-r2)
(10/22) Upgrading py3-requests (2.31.0-r2 -> 2.32.3-r0)
(11/22) Upgrading py3-requests-pyc (2.31.0-r2 -> 2.32.3-r0)
(12/22) Upgrading python3-pyc (3.12.3-r1 -> 3.12.3-r2)
(13/22) Upgrading linux-virt (6.6.34-r1 -> 6.6.48-r0)
(14/22) Upgrading openssh-keygen (9.7_p1-r3 -> 9.7_p1-r4)
(15/22) Upgrading openssh-client-common (9.7_p1-r3 -> 9.7_p1-r4)
(16/22) Upgrading openssh-client-default (9.7_p1-r3 -> 9.7_p1-r4)
(17/22) Upgrading openssh-sftp-server (9.7_p1-r3 -> 9.7_p1-r4)
(18/22) Upgrading openssh-server-common (9.7_p1-r3 -> 9.7_p1-r4)
(19/22) Upgrading openssh-server-common-openrc (9.7_p1-r3 -> 9.7_p1-r4)
(20/22) Upgrading openssh-server (9.7_p1-r3 -> 9.7_p1-r4)
(21/22) Upgrading openssh (9.7_p1-r3 -> 9.7_p1-r4)
(22/22) Upgrading openssh-server-pam (9.7_p1-r3 -> 9.7_p1-r4)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
Executing kmod-32-r0.trigger
Executing mkinitfs-3.10.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.48-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 144 MiB in 151 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.28.1-r0)
(3/10) Installing nghttp2-libs (1.62.1-r0)
(4/10) Installing libpsl (0.21.5-r1)
(5/10) Installing libcurl (8.9.1-r1)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.45.2-r0)
(8/10) Installing git-init-template (2.45.2-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r29.trigger
OK: 154 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/nncmpp.git nncmpp
Cloning into 'nncmpp'...
remote: Enumerating objects: 1110, done.        
remote: Counting objects: 100% (404/404), done.        
remote: Compressing objects: 100% (402/402), done.        
remote: Total 1110 (delta 263), reused 0 (delta 0), pack-reused 706 (from 1)        
Receiving objects: 100% (1110/1110), 794.58 KiB | 5.03 MiB/s, done.
Resolving deltas: 100% (715/715), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Submodule 'termo' (https://git.janouch.name/p/termo.git) registered for path 'termo'
Cloning into '/home/ci/nncmpp/liberty'...
remote: Enumerating objects: 764, done.        
remote: Counting objects: 100% (233/233), done.        
remote: Compressing objects: 100% (230/230), done.        
remote: Total 764 (delta 138), reused 0 (delta 0), pack-reused 531 (from 1)        
Receiving objects: 100% (764/764), 387.19 KiB | 5.87 MiB/s, done.
Resolving deltas: 100% (459/459), done.
Cloning into '/home/ci/nncmpp/termo'...
remote: Enumerating objects: 1977, done.        
remote: Counting objects: 100% (38/38), done.        
remote: Compressing objects: 100% (37/37), done.        
remote: Total 1977 (delta 14), reused 0 (delta 0), pack-reused 1939 (from 1)        
Receiving objects: 100% (1977/1977), 1.38 MiB | 8.07 MiB/s, done.
Resolving deltas: 100% (1259/1259), done.
Submodule path 'liberty': checked out '75fc6f1c374796f9e794297c3893089009b8772f'
Submodule path 'termo': checked out '2518b53e5ae4579bf84ed58fa7a62806f64e861c'
+ cd nncmpp
+ git -c 'advice.detachedHead=false' checkout 9d0acddf9a0e31f86da1064bd1cf6e8ed8e277ae
HEAD is now at 9d0acdd Implement font fallbacks in the editor
+ doas apk add --no-interactive build-base cmake asciidoctor rsvg-convert libunistring-dev ncurses-dev curl-dev fftw-dev pulseaudio-dev libx11-dev libxft-dev libpng-dev
(1/155) Installing ruby-libs (3.3.3-r0)
(2/155) Installing libucontext (1.2-r3)
(3/155) Installing ruby (3.3.3-r0)
(4/155) Installing asciidoctor (2.0.23-r0)
(5/155) Installing jansson (2.14-r4)
(6/155) Installing binutils (2.42-r0)
(7/155) Installing libmagic (5.45-r1)
(8/155) Installing file (5.45-r1)
(9/155) Installing libgomp (13.2.1_git20240309-r0)
(10/155) Installing libatomic (13.2.1_git20240309-r0)
(11/155) Installing isl26 (0.26-r1)
(12/155) Installing mpfr4 (4.2.1-r0)
(13/155) Installing mpc1 (1.3.1-r1)
(14/155) Installing gcc (13.2.1_git20240309-r0)
(15/155) Installing libstdc++-dev (13.2.1_git20240309-r0)
(16/155) Installing musl-dev (1.2.5-r0)
(17/155) Installing g++ (13.2.1_git20240309-r0)
(18/155) Installing make (4.4.1-r2)
(19/155) Installing fortify-headers (1.1-r3)
(20/155) Installing patch (2.7.6-r10)
(21/155) Installing build-base (0.5-r3)
(22/155) Installing lz4-libs (1.9.4-r5)
(23/155) Installing libarchive (3.7.4-r0)
(24/155) Installing rhash-libs (1.4.4-r0)
(25/155) Installing libuv (1.48.0-r0)
(26/155) Installing cmake (3.29.3-r0)
(27/155) Installing brotli (1.1.0-r2)
(28/155) Installing pkgconf (2.2.0-r0)
(29/155) Installing brotli-dev (1.1.0-r2)
(30/155) Installing c-ares-dev (1.28.1-r0)
(31/155) Installing libidn2-dev (2.3.7-r0)
(32/155) Installing libpsl-utils (0.21.5-r1)
(33/155) Installing libpsl-dev (0.21.5-r1)
(34/155) Installing nghttp2-dev (1.62.1-r0)
(35/155) Installing openssl-dev (3.3.1-r3)
(36/155) Installing zlib-dev (1.3.1-r1)
(37/155) Installing zstd (1.5.6-r0)
(38/155) Installing zstd-dev (1.5.6-r0)
(39/155) Installing curl-dev (8.9.1-r1)
(40/155) Installing fftw-double-libs (3.3.10-r5)
(41/155) Installing fftw-long-double-libs (3.3.10-r5)
(42/155) Installing fftw-single-libs (3.3.10-r5)
(43/155) Installing fftw-dev (3.3.10-r5)
(44/155) Installing libpng (1.6.43-r0)
(45/155) Installing libpng-dev (1.6.43-r0)
(46/155) Installing libunistring-dev (1.2-r0)
(47/155) Installing libxau (1.0.11-r4)
(48/155) Installing xorgproto (2024.1-r0)
(49/155) Installing libxau-dev (1.0.11-r4)
(50/155) Installing xcb-proto (1.16.0-r1)
(51/155) Installing xcb-proto-pyc (1.16.0-r1)
(52/155) Installing libxdmcp (1.1.5-r1)
(53/155) Installing libxcb (1.16.1-r0)
(54/155) Installing libxdmcp-dev (1.1.5-r1)
(55/155) Installing libxcb-dev (1.16.1-r0)
(56/155) Installing xtrans (1.5.0-r0)
(57/155) Installing libx11 (1.8.9-r1)
(58/155) Installing libx11-dev (1.8.9-r1)
(59/155) Installing libxrender (0.9.11-r5)
(60/155) Installing freetype (2.13.2-r0)
(61/155) Installing fontconfig (2.15.0-r1)
(62/155) Installing libxft (2.3.8-r3)
(63/155) Installing expat (2.6.2-r0)
(64/155) Installing expat-dev (2.6.2-r0)
(65/155) Installing freetype-dev (2.13.2-r0)
(66/155) Installing fontconfig-dev (2.15.0-r1)
(67/155) Installing libxrender-dev (0.9.11-r5)
(68/155) Installing libxft-dev (2.3.8-r3)
(69/155) Installing libformw (6.4_p20240420-r0)
(70/155) Installing libmenuw (6.4_p20240420-r0)
(71/155) Installing libncurses++ (6.4_p20240420-r0)
(72/155) Installing ncurses-dev (6.4_p20240420-r0)
(73/155) Installing libintl (0.22.5-r0)
(74/155) Installing glib (2.80.2-r0)
(75/155) Installing libasyncns (0.8-r3)
(76/155) Installing dbus-libs (1.14.10-r1)
(77/155) Installing libltdl (2.4.7-r3)
(78/155) Installing orc (0.4.37-r0)
(79/155) Installing libogg (1.3.5-r5)
(80/155) Installing libflac (1.4.3-r1)
(81/155) Installing alsa-lib (1.2.11-r0)
(82/155) Installing opus (1.5.2-r0)
(83/155) Installing libvorbis (1.3.7-r2)
(84/155) Installing libsndfile (1.2.2-r0)
(85/155) Installing soxr (0.1.3-r7)
(86/155) Installing speexdsp (1.2.1-r2)
(87/155) Installing tdb-libs (1.4.9-r1)
(88/155) Installing libpulse (17.0-r0)
(89/155) Installing libpulse-mainloop-glib (17.0-r0)
(90/155) Installing bzip2-dev (1.0.8-r6)
(91/155) Installing libxml2 (2.12.7-r0)
(92/155) Installing libxml2-utils (2.12.7-r0)
(93/155) Installing docbook-xml (4.5-r9)
Executing docbook-xml-4.5-r9.post-install
(94/155) Installing libgpg-error (1.49-r0)
(95/155) Installing libgcrypt (1.10.3-r0)
(96/155) Installing libxslt (1.1.39-r1)
(97/155) Installing docbook-xsl (1.79.2-r9)
Executing docbook-xsl-1.79.2-r9.post-install
(98/155) Installing xz (5.6.2-r0)
(99/155) Installing gettext-asprintf (0.22.5-r0)
(100/155) Installing gettext-libs (0.22.5-r0)
(101/155) Installing gettext-envsubst (0.22.5-r0)
(102/155) Installing gettext (0.22.5-r0)
(103/155) Installing gettext-dev (0.22.5-r0)
(104/155) Installing py3-parsing (3.1.2-r1)
(105/155) Installing py3-parsing-pyc (3.1.2-r1)
(106/155) Installing py3-packaging (24.0-r1)
(107/155) Installing py3-packaging-pyc (24.0-r1)
(108/155) Installing linux-headers (6.6-r0)
(109/155) Installing libffi-dev (3.4.6-r0)
(110/155) Installing bsd-compat-headers (0.7.2-r6)
(111/155) Installing libedit-dev (20240517.3.1-r0)
(112/155) Installing libpcre2-16 (10.43-r0)
(113/155) Installing libpcre2-32 (10.43-r0)
(114/155) Installing pcre2-dev (10.43-r0)
(115/155) Installing sqlite (3.45.3-r1)
(116/155) Installing sqlite-dev (3.45.3-r1)
(117/155) Installing util-linux (2.40.1-r1)
(118/155) Installing dmesg (2.40.1-r1)
(119/155) Installing setarch (2.40.1-r1)
(120/155) Installing util-linux-misc (2.40.1-r1)
(121/155) Installing runuser (2.40.1-r1)
(122/155) Installing losetup (2.40.1-r1)
(123/155) Installing hexdump (2.40.1-r1)
(124/155) Installing uuidgen (2.40.1-r1)
(125/155) Installing mcookie (2.40.1-r1)
(126/155) Installing agetty (2.40.1-r1)
(127/155) Installing agetty-openrc (0.54-r1)
(128/155) Installing wipefs (2.40.1-r1)
(129/155) Installing cfdisk (2.40.1-r1)
(130/155) Installing umount (2.40.1-r1)
(131/155) Installing util-linux-openrc (2.40.1-r1)
(132/155) Installing flock (2.40.1-r1)
(133/155) Installing lsblk (2.40.1-r1)
(134/155) Installing libcap-ng (0.8.5-r0)
(135/155) Installing setpriv (2.40.1-r1)
(136/155) Installing logger (2.40.1-r1)
(137/155) Installing fstrim (2.40.1-r1)
(138/155) Installing findmnt (2.40.1-r1)
(139/155) Installing util-linux-dev (2.40.1-r1)
(140/155) Installing glib-dev (2.80.2-r0)
(141/155) Installing pulseaudio-dev (17.0-r0)
(142/155) Installing libxext (1.3.6-r2)
(143/155) Installing pixman (0.43.2-r0)
(144/155) Installing cairo (1.18.0-r0)
(145/155) Installing shared-mime-info (2.4-r0)
(146/155) Installing libjpeg-turbo (3.0.3-r0)
(147/155) Installing libsharpyuv (1.3.2-r0)
(148/155) Installing libwebp (1.3.2-r0)
(149/155) Installing tiff (4.6.0t-r0)
(150/155) Installing gdk-pixbuf (2.42.11-r1)
(151/155) Installing fribidi (1.0.15-r0)
(152/155) Installing graphite2 (1.3.14-r6)
(153/155) Installing harfbuzz (8.5.0-r0)
(154/155) Installing pango (1.52.2-r0)
(155/155) Installing rsvg-convert (2.58.0-r0)
Executing busybox-1.36.1-r29.trigger
Executing glib-2.80.2-r0.trigger
No schema files found: doing nothing.
Executing shared-mime-info-2.4-r0.trigger
Executing gdk-pixbuf-2.42.11-r1.trigger
OK: 567 MiB in 316 packages
+ cmake -B build '-DBUILD_TESTING=ON'
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Found Ncursesw: ncursesw
-- Found Unistring: /usr/include
-- Checking for module 'libcurl'
--   Found libcurl, version 8.9.1
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
CMake Deprecation Warning at termo/CMakeLists.txt:1 (cmake_minimum_required):
  Compatibility with CMake < 3.5 will be removed from a future version of
  CMake.

  Update the VERSION argument <min> value or use a ...<max> suffix to tell
  CMake that the project does not need compatibility with older versions.


-- Found Curses: /usr/lib/libcurses.so
-- Checking for modules 'glib-2.0;gio-2.0'
--   Found glib-2.0, version 2.80.2
--   Found gio-2.0, version 2.80.2
-- Checking for module 'unibilium>=0.1.0'
--   Package 'unibilium' not found
-- Checking for modules 'fftw3;fftw3f'
--   Found fftw3, version 3.3.10
--   Found fftw3f, version 3.3.10
-- Checking for module 'libpulse'
--   Found libpulse, version 17.0
-- Checking for modules 'x11;xrender;xft;fontconfig;libpng'
--   Found x11, version 1.8.9
--   Found xrender, version 0.9.11
--   Found xft, version 2.3.8
--   Found fontconfig, version 2.15.0
--   Found libpng, version 1.6.43
-- Looking for resizeterm
-- Looking for resizeterm - found
-- Configuring done (2.5s)
-- Generating done (0.1s)
-- Build files have been written to: /home/ci/nncmpp/build
+ cmake --build build -- package
[  9%] [32mBuilding C object termo/CMakeFiles/termo-static.dir/termo.c.o[0m
[ 18%] [32mBuilding C object termo/CMakeFiles/termo-static.dir/driver-csi.c.o[0m
[ 27%] [32mBuilding C object termo/CMakeFiles/termo-static.dir/driver-ti.c.o[0m
[ 36%] [32m[1mLinking C static library libtermo-0.a[0m
[ 36%] Built target termo-static
[ 45%] [34m[1mGenerating nncmpp-actions.h[0m
[ 54%] [32mBuilding C object CMakeFiles/nncmpp.dir/nncmpp.c.o[0m
[ 63%] [32m[1mLinking C executable nncmpp[0m
[ 63%] Built target nncmpp
[ 72%] [34m[1mGenerating nncmpp 16x16 application icon[0m
[ 81%] [34m[1mGenerating nncmpp 32x32 application icon[0m
[ 90%] [34m[1mGenerating nncmpp 48x48 application icon[0m
[ 90%] Built target icons
[100%] [34m[1mGenerating man page for nncmpp[0m
[100%] Built target docs
[36mRun CPack packaging tool...[0m
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: nncmpp
CPack: - Install project: nncmpp []
CPack: Create package
CPack: - package: /home/ci/nncmpp/build/nncmpp-2.1.1-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: nncmpp
CPack: - Install project: nncmpp []
CPack: Create package
CPack: - package: /home/ci/nncmpp/build/nncmpp-2.1.1-Linux-x86_64.zip generated.
+ cmake --build build -- test
[36mRunning tests...[0m
gmake[1]: Entering directory '/home/ci/nncmpp/build/termo'
[  1%] [32mBuilding C object termo/CMakeFiles/termo.dir/termo.c.o[0m
[  3%] [32mBuilding C object termo/CMakeFiles/termo.dir/driver-csi.c.o[0m
[  5%] [32mBuilding C object termo/CMakeFiles/termo.dir/driver-ti.c.o[0m
[  7%] [32m[1mLinking C shared library libtermo-0.so[0m
[  7%] Built target termo
[ 14%] Built target termo-static
[ 16%] [32mBuilding C object termo/CMakeFiles/test-01base.dir/tests/01base.c.o[0m
/home/ci/nncmpp/termo/tests/01base.c: In function 'main':
/home/ci/nncmpp/termo/tests/01base.c:6:11: warning: unused parameter 'argc' [-Wunused-parameter]
    6 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/01base.c:6:23: warning: unused parameter 'argv' [-Wunused-parameter]
    6 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 17%] [32mBuilding C object termo/CMakeFiles/test-01base.dir/tests/taplib.c.o[0m
[ 19%] [32m[1mLinking C executable test-01base[0m
[ 19%] Built target test-01base
[ 21%] [32mBuilding C object termo/CMakeFiles/test-02getkey.dir/tests/02getkey.c.o[0m
/home/ci/nncmpp/termo/tests/02getkey.c: In function 'main':
/home/ci/nncmpp/termo/tests/02getkey.c:5:11: warning: unused parameter 'argc' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/02getkey.c:5:23: warning: unused parameter 'argv' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 23%] [32mBuilding C object termo/CMakeFiles/test-02getkey.dir/tests/taplib.c.o[0m
[ 25%] [32m[1mLinking C executable test-02getkey[0m
[ 25%] Built target test-02getkey
[ 26%] [32mBuilding C object termo/CMakeFiles/test-03utf8.dir/tests/03utf8.c.o[0m
/home/ci/nncmpp/termo/tests/03utf8.c: In function 'main':
/home/ci/nncmpp/termo/tests/03utf8.c:5:11: warning: unused parameter 'argc' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/03utf8.c:5:23: warning: unused parameter 'argv' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 28%] [32mBuilding C object termo/CMakeFiles/test-03utf8.dir/tests/taplib.c.o[0m
[ 30%] [32m[1mLinking C executable test-03utf8[0m
[ 30%] Built target test-03utf8
[ 32%] [32mBuilding C object termo/CMakeFiles/test-04flags.dir/tests/04flags.c.o[0m
/home/ci/nncmpp/termo/tests/04flags.c: In function 'main':
/home/ci/nncmpp/termo/tests/04flags.c:6:11: warning: unused parameter 'argc' [-Wunused-parameter]
    6 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/04flags.c:6:23: warning: unused parameter 'argv' [-Wunused-parameter]
    6 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 33%] [32mBuilding C object termo/CMakeFiles/test-04flags.dir/tests/taplib.c.o[0m
[ 35%] [32m[1mLinking C executable test-04flags[0m
[ 35%] Built target test-04flags
[ 37%] [32mBuilding C object termo/CMakeFiles/test-05read.dir/tests/05read.c.o[0m
/home/ci/nncmpp/termo/tests/05read.c: In function 'main':
/home/ci/nncmpp/termo/tests/05read.c:10:11: warning: unused parameter 'argc' [-Wunused-parameter]
   10 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/05read.c:10:23: warning: unused parameter 'argv' [-Wunused-parameter]
   10 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 39%] [32mBuilding C object termo/CMakeFiles/test-05read.dir/tests/taplib.c.o[0m
[ 41%] [32m[1mLinking C executable test-05read[0m
[ 41%] Built target test-05read
[ 42%] [32mBuilding C object termo/CMakeFiles/test-06buffer.dir/tests/06buffer.c.o[0m
/home/ci/nncmpp/termo/tests/06buffer.c: In function 'main':
/home/ci/nncmpp/termo/tests/06buffer.c:6:11: warning: unused parameter 'argc' [-Wunused-parameter]
    6 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/06buffer.c:6:23: warning: unused parameter 'argv' [-Wunused-parameter]
    6 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 44%] [32mBuilding C object termo/CMakeFiles/test-06buffer.dir/tests/taplib.c.o[0m
[ 46%] [32m[1mLinking C executable test-06buffer[0m
[ 46%] Built target test-06buffer
[ 48%] [32mBuilding C object termo/CMakeFiles/test-10keyname.dir/tests/10keyname.c.o[0m
/home/ci/nncmpp/termo/tests/10keyname.c: In function 'main':
/home/ci/nncmpp/termo/tests/10keyname.c:5:11: warning: unused parameter 'argc' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/10keyname.c:5:23: warning: unused parameter 'argv' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 50%] [32mBuilding C object termo/CMakeFiles/test-10keyname.dir/tests/taplib.c.o[0m
[ 51%] [32m[1mLinking C executable test-10keyname[0m
[ 51%] Built target test-10keyname
[ 53%] [32mBuilding C object termo/CMakeFiles/test-11strfkey.dir/tests/11strfkey.c.o[0m
/home/ci/nncmpp/termo/tests/11strfkey.c: In function 'main':
/home/ci/nncmpp/termo/tests/11strfkey.c:5:11: warning: unused parameter 'argc' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/11strfkey.c:5:23: warning: unused parameter 'argv' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 55%] [32mBuilding C object termo/CMakeFiles/test-11strfkey.dir/tests/taplib.c.o[0m
[ 57%] [32m[1mLinking C executable test-11strfkey[0m
[ 57%] Built target test-11strfkey
[ 58%] [32mBuilding C object termo/CMakeFiles/test-12strpkey.dir/tests/12strpkey.c.o[0m
/home/ci/nncmpp/termo/tests/12strpkey.c: In function 'main':
/home/ci/nncmpp/termo/tests/12strpkey.c:5:11: warning: unused parameter 'argc' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/12strpkey.c:5:23: warning: unused parameter 'argv' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 60%] [32mBuilding C object termo/CMakeFiles/test-12strpkey.dir/tests/taplib.c.o[0m
[ 62%] [32m[1mLinking C executable test-12strpkey[0m
[ 62%] Built target test-12strpkey
[ 64%] [32mBuilding C object termo/CMakeFiles/test-13cmpkey.dir/tests/13cmpkey.c.o[0m
/home/ci/nncmpp/termo/tests/13cmpkey.c: In function 'main':
/home/ci/nncmpp/termo/tests/13cmpkey.c:5:11: warning: unused parameter 'argc' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/13cmpkey.c:5:23: warning: unused parameter 'argv' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 66%] [32mBuilding C object termo/CMakeFiles/test-13cmpkey.dir/tests/taplib.c.o[0m
[ 67%] [32m[1mLinking C executable test-13cmpkey[0m
[ 67%] Built target test-13cmpkey
[ 69%] [32mBuilding C object termo/CMakeFiles/test-20canon.dir/tests/20canon.c.o[0m
/home/ci/nncmpp/termo/tests/20canon.c: In function 'main':
/home/ci/nncmpp/termo/tests/20canon.c:5:11: warning: unused parameter 'argc' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/20canon.c:5:23: warning: unused parameter 'argv' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 71%] [32mBuilding C object termo/CMakeFiles/test-20canon.dir/tests/taplib.c.o[0m
[ 73%] [32m[1mLinking C executable test-20canon[0m
[ 73%] Built target test-20canon
[ 75%] [32mBuilding C object termo/CMakeFiles/test-30mouse.dir/tests/30mouse.c.o[0m
/home/ci/nncmpp/termo/tests/30mouse.c: In function 'main':
/home/ci/nncmpp/termo/tests/30mouse.c:5:11: warning: unused parameter 'argc' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/30mouse.c:5:23: warning: unused parameter 'argv' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 76%] [32mBuilding C object termo/CMakeFiles/test-30mouse.dir/tests/taplib.c.o[0m
[ 78%] [32m[1mLinking C executable test-30mouse[0m
[ 78%] Built target test-30mouse
[ 80%] [32mBuilding C object termo/CMakeFiles/test-31position.dir/tests/31position.c.o[0m
/home/ci/nncmpp/termo/tests/31position.c: In function 'main':
/home/ci/nncmpp/termo/tests/31position.c:5:11: warning: unused parameter 'argc' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/31position.c:5:23: warning: unused parameter 'argv' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 82%] [32mBuilding C object termo/CMakeFiles/test-31position.dir/tests/taplib.c.o[0m
[ 83%] [32m[1mLinking C executable test-31position[0m
[ 83%] Built target test-31position
[ 85%] [32mBuilding C object termo/CMakeFiles/test-32modereport.dir/tests/32modereport.c.o[0m
/home/ci/nncmpp/termo/tests/32modereport.c: In function 'main':
/home/ci/nncmpp/termo/tests/32modereport.c:5:11: warning: unused parameter 'argc' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/32modereport.c:5:23: warning: unused parameter 'argv' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 87%] [32mBuilding C object termo/CMakeFiles/test-32modereport.dir/tests/taplib.c.o[0m
[ 89%] [32m[1mLinking C executable test-32modereport[0m
[ 89%] Built target test-32modereport
[ 91%] [32mBuilding C object termo/CMakeFiles/test-33focus.dir/tests/33focus.c.o[0m
/home/ci/nncmpp/termo/tests/33focus.c: In function 'main':
/home/ci/nncmpp/termo/tests/33focus.c:5:11: warning: unused parameter 'argc' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/33focus.c:5:23: warning: unused parameter 'argv' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 92%] [32mBuilding C object termo/CMakeFiles/test-33focus.dir/tests/taplib.c.o[0m
[ 94%] [32m[1mLinking C executable test-33focus[0m
[ 94%] Built target test-33focus
[ 96%] [32mBuilding C object termo/CMakeFiles/test-39csi.dir/tests/39csi.c.o[0m
/home/ci/nncmpp/termo/tests/39csi.c: In function 'main':
/home/ci/nncmpp/termo/tests/39csi.c:5:11: warning: unused parameter 'argc' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |       ~~~~^~~~
/home/ci/nncmpp/termo/tests/39csi.c:5:23: warning: unused parameter 'argv' [-Wunused-parameter]
    5 | main (int argc, char *argv[])
      |                 ~~~~~~^~~~~~
[ 98%] [32mBuilding C object termo/CMakeFiles/test-39csi.dir/tests/taplib.c.o[0m
[100%] [32m[1mLinking C executable test-39csi[0m
[100%] Built target test-39csi
gmake[1]: Leaving directory '/home/ci/nncmpp/build/termo'
Test project /home/ci/nncmpp/build
      Start  1: test-xmlwf-nncmpp.svg
 1/18 Test  #1: test-xmlwf-nncmpp.svg ............   Passed    0.00 sec
      Start  2: test-xmllint-nncmpp.svg
 2/18 Test  #2: test-xmllint-nncmpp.svg ..........   Passed    0.00 sec
      Start  3: termo.01base
 3/18 Test  #3: termo.01base .....................   Passed    0.01 sec
      Start  4: termo.02getkey
 4/18 Test  #4: termo.02getkey ...................   Passed    0.00 sec
      Start  5: termo.03utf8
 5/18 Test  #5: termo.03utf8 .....................   Passed    0.00 sec
      Start  6: termo.04flags
 6/18 Test  #6: termo.04flags ....................   Passed    0.00 sec
      Start  7: termo.05read
 7/18 Test  #7: termo.05read .....................   Passed    0.00 sec
      Start  8: termo.06buffer
 8/18 Test  #8: termo.06buffer ...................   Passed    0.00 sec
      Start  9: termo.10keyname
 9/18 Test  #9: termo.10keyname ..................   Passed    0.00 sec
      Start 10: termo.11strfkey
10/18 Test #10: termo.11strfkey ..................   Passed    0.00 sec
      Start 11: termo.12strpkey
11/18 Test #11: termo.12strpkey ..................   Passed    0.00 sec
      Start 12: termo.13cmpkey
12/18 Test #12: termo.13cmpkey ...................   Passed    0.00 sec
      Start 13: termo.20canon
13/18 Test #13: termo.20canon ....................   Passed    0.00 sec
      Start 14: termo.30mouse
14/18 Test #14: termo.30mouse ....................   Passed    0.00 sec
      Start 15: termo.31position
15/18 Test #15: termo.31position .................   Passed    0.00 sec
      Start 16: termo.32modereport
16/18 Test #16: termo.32modereport ...............   Passed    0.00 sec
      Start 17: termo.33focus
17/18 Test #17: termo.33focus ....................   Passed    0.00 sec
      Start 18: termo.39csi
18/18 Test #18: termo.39csi ......................   Passed    0.00 sec

100% tests passed, 0 tests failed out of 18

Total Test time (real) =   0.06 sec