- Project
- p/nncmpp
- Commit
- eec0706333ecf28898b1879cae5dab791b307cf6
- Runner
- OpenBSD 7.5
- State
- Success
- Notified
- 1
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=openbsd
+ acid_image=openbsd-7.5-custom.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/openbsd-7.5-custom.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/openbsd-7.5-custom.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7l[2J[0mSeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
Using drive 0, partition 3.
Loading......
probing: pc0 com0 mem[639K 2046M a20=on]
disk: fd0 hd0+ hd1+*
>> OpenBSD/amd64 BOOT 3.65
switching console to com>> OpenBSD/amd64 BOOT 3.65
boot> 0
booting hd0a:/bsd: 17819477+4281352+417824+0+1232896 [1553156+128+1394592+1090945]=0x1a834b0
entry point at 0xffffffff81001000
[ using 4039856 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.5 (GENERIC.MP) #82: Wed Mar 20 15:48:40 MDT 2024
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2130550784 (2031MB)
avail mem = 2045075456 (1950MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf6560 (9 entries)
bios0: vendor SeaBIOS version "Arch Linux 1.16.3-1-1" date 04/01/2014
bios0: QEMU Standard PC (i440FX + PIIX, 1996)
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP APIC HPET WAET
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: QEMU Virtual CPU version 2.5+, 1696.49 MHz, 0f-6b-01
cpu0: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,x2APIC,HV,NXE,LONG,LAHF,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 4MB 64b/line 16-way L2 cache, 16MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 1000MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: QEMU Virtual CPU version 2.5+, 1696.74 MHz, 0f-6b-01
cpu1: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,x2APIC,HV,NXE,LONG,LAHF,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 4MB 64b/line 16-way L2 cache, 16MB 64b/line 16-way L3 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpihpet0 at acpi0: 100000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
"ACPI0006" at acpi0 not configured
acpipci0 at acpi0 PCI0
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"QEMU0002" at acpi0 not configured
com0 at acpi0 COM1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com0: console
acpicmos0 at acpi0
"ACPI0010" at acpi0 not configured
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
pvbus0 at mainbus0: KVM
pvclock0 at pvbus0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int 9
iic0 at piixpm0
vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
wsdisplay at vga1 not configured
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address 52:54:00:12:34:56
virtio0: msix per-VQ
virtio1 at pci0 dev 4 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio1
scsibus2 at vioblk0: 1 targets
sd0 at scsibus2 targ 0 lun 0: <VirtIO, Block Device, >
sd0: 6144MB, 512 bytes/sector, 12582912 sectors
virtio1: msix per-VQ
virtio2 at pci0 dev 5 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk1 at virtio2
scsibus3 at vioblk1: 1 targets
sd1 at scsibus3 targ 0 lun 0: <VirtIO, Block Device, >
sd1: 0MB, 512 bytes/sector, 732 sectors
virtio2: msix per-VQ
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (99160cd4212d7426.a) swap on sd0b dump on sd0b
WARNING: clock gained 60 days
WARNING: CHECK AND RESET THE DATE!
Automatic boot in progress: starting file system checks.
/dev/sd0a (99160cd4212d7426.a): file system is clean; not checking
pf enabled
starting network
reordering: ld.sofd0 at fdc0 drive 1: density unknown
libc libcrypto sshd.
openssl: generating isakmpd RSA keys... done.
openssl: generating iked ECDSA keys... done.
ssh-keygen: generating new host keys: RSA ECDSA ED25519
sshd: (ED25519) SHA256:NkFiiZr7KfYmazTxozdxaRzyTKtVhd6FZVDZypjym5M
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: /dev/sd0b: Device not configured
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
running rc.firsttime
fw_update: add none; update none
Checking for available binary patches...
syspatch: cdn.openbsd.org: no address associated with name
Cloud-init v. 24.1.6 running 'init-local' at Mon, 02 Sep 2024 21:31:56 +0000. Up 16.66756844520569 seconds.
2024-09-02 21:31:57,232 - util.py[WARNING]: Failed to mount /dev/sd1i when looking for data
2024-09-02 21:31:57,589 - util.py[WARNING]: Failed to parse /etc/resolv.conf, use new empty file
Cloud-init v. 24.1.6 running 'init' at Mon, 02 Sep 2024 21:32:01 +0000. Up 21.591858386993408 seconds.
ci-info: +++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++
ci-info: +--------+-------+----------------+------------+-------+------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+-------+----------------+------------+-------+------------+
ci-info: | enc0 | False | . | . | . | . |
ci-info: | lo0 | True | 127.0.0.1 | 0xff000000 | . | . |
ci-info: | lo0 | True | ::1/128 | . | . | . |
ci-info: | lo0 | True | fe80::1%lo0/64 | . | 0x3 | . |
ci-info: | pflog0 | True | . | . | . | . |
ci-info: | vio0 | True | 10.0.2.15 | 0xffffff00 | . | . |
ci-info: +--------+-------+----------------+------------+-------+------------+
ci-info:
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:ES2C+FUPfwGw9SyteOaffDJBjbMxsBX0bf8eZep1yHQ root@openbsd-ci
The key's randomart image is:
+---[RSA 3072]----+
| . . .=ooo+. |
| . . o .Bo+.o . |
| . . .o.++=o. o|
| . o.+* ...|
| S +. =. E|
| + oo =o|
| . .+.+|
| ooo.oo|
| ++. .|
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:LuBySqTsrgOpV8OWp/3Bc5TSKh/6oY1vP6zDnB9UEXM root@openbsd-ci
The key's randomart image is:
+---[ECDSA 256]---+
| +.E |
| + |
| . |
| . o |
| ..... S = |
|+o .*..o = |
|+.ooo=ooOoo |
|+..+. .O**o. |
|+=. +=B=o. |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:BhzGQ7+BChNISY5kIEvvGJ7KJcjgPXnT66xDgXmYN4Q root@openbsd-ci
The key's randomart image is:
+--[ED25519 256]--+
|*Bo .o+ |
|Oo.E +o+ |
|+oo.* +.o |
|* *B.*.. o |
|.B *+oo.S |
|o o o.... |
|.. . . |
| .o |
| .oo |
+----[SHA256]-----+
Cloud-init v. 24.1.6 running 'modules:config' at Mon, 02 Sep 2024 21:32:05 +0000. Up 25.655170440673828 seconds.
Cloud-init v. 24.1.6 running 'modules:final' at Mon, 02 Sep 2024 21:32:10 +0000. Up 30.16914200782776 seconds.
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
2024-09-02 21:32:10,663 - cc_keys_to_console.py[WARNING]: Unable to activate module keys_to_console, helper tool not found at /usr/lib/cloud-init/write-ssh-key-fingerprints
Cloud-init v. 24.1.6 finished at Mon, 02 Sep 2024 21:32:10 +0000. Datasource DataSourceNoCloud [seed=/dev/sd1a][dsmode=net]. Up 30.76090407371521 seconds
starting local daemons: cron.
Mon Sep 2 23:32:10 CEST 2024
OpenBSD/amd64 (openbsd-ci) (tty00)
login:
Task log
+ sudo pkg_add -u
quirks-7.14 signed on 2024-09-02T14:37:03Z
quirks-7.14->7.14: ok
Read shared items: ok
+ sudo pkg_add git
quirks-7.14 signed on 2024-09-02T14:37:03Z
git-2.44.1:gitwrapper-0.99: ok
git-2.44.1:p5-Error-0.17029: ok
git-2.44.1:p5-Time-TimeDate-2.33: ok
git-2.44.1:p5-Mail-Tools-2.21p0: ok
git-2.44.1:ngtcp2-1.3.0: ok
git-2.44.1:nghttp2-1.58.0: ok
git-2.44.1:nghttp3-1.2.0: ok
git-2.44.1:curl-8.9.0: ok
git-2.44.1:cvsps-2.1p3: ok
git-2.44.1: ok
The following new rcscripts were installed: /etc/rc.d/gitdaemon
See rcctl(8) for details.
New and changed readme(s):
/usr/local/share/doc/pkg-readmes/git
+ git clone --recursive https://git.janouch.name/p/nncmpp.git nncmpp
Cloning into 'nncmpp'...
remote: Enumerating objects: 1113, done.
remote: Counting objects: 100% (407/407), done.
remote: Compressing objects: 100% (405/405), done.
remote: Total 1113 (delta 266), reused 0 (delta 0), pack-reused 706 (from 1)
Receiving objects: 100% (1113/1113), 753.23 KiB | 4.38 MiB/s, done.
Resolving deltas: 100% (718/718), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Submodule 'termo' (https://git.janouch.name/p/termo.git) registered for path 'termo'
Cloning into '/home/ci/nncmpp/liberty'...
remote: Enumerating objects: 764, done.
remote: Counting objects: 100% (233/233), done.
remote: Compressing objects: 100% (230/230), done.
remote: Total 764 (delta 138), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (764/764), 387.19 KiB | 4.25 MiB/s, done.
Resolving deltas: 100% (459/459), done.
Cloning into '/home/ci/nncmpp/termo'...
remote: Enumerating objects: 1977, done.
remote: Counting objects: 100% (38/38), done.
remote: Compressing objects: 100% (37/37), done.
remote: Total 1977 (delta 14), reused 0 (delta 0), pack-reused 1939 (from 1)
Receiving objects: 100% (1977/1977), 1.38 MiB | 5.52 MiB/s, done.
Resolving deltas: 100% (1259/1259), done.
Submodule path 'liberty': checked out '75fc6f1c374796f9e794297c3893089009b8772f'
Submodule path 'termo': checked out '2518b53e5ae4579bf84ed58fa7a62806f64e861c'
+ cd nncmpp
+ git -c advice.detachedHead=false checkout eec0706333ecf28898b1879cae5dab791b307cf6
HEAD is now at eec0706 Support libunistring versions before 1.2
+ sudo pkg_add cmake librsvg libunistring curl fftw3 fftw3-float pulseaudio
quirks-7.14 signed on 2024-09-02T14:37:03Z
cmake-3.28.3v0:libb2-0.98.1v0: ok
cmake-3.28.3v0:lz4-1.9.4: ok
cmake-3.28.3v0:zstd-1.5.5: ok
cmake-3.28.3v0:libarchive-3.7.2: ok
cmake-3.28.3v0:rhash-1.4.4p0: ok
cmake-3.28.3v0:jsoncpp-1.9.5: ok
cmake-3.28.3v0:libuv-1.48.0: ok
cmake-3.28.3v0: ok
librsvg-2.57.2:graphite2-1.3.14: ok
librsvg-2.57.2:glib2-2.78.6: ok
librsvg-2.57.2:lzo2-2.10p2: ok
librsvg-2.57.2:png-1.6.43: ok
librsvg-2.57.2:cairo-1.18.0: ok
librsvg-2.57.2:harfbuzz-8.3.0: ok
librsvg-2.57.2:fribidi-1.0.13: ok
librsvg-2.57.2:pango-1.52.1: ok
librsvg-2.57.2:libxml-2.12.9: ok
librsvg-2.57.2:jpeg-3.0.2v0: ok
librsvg-2.57.2:tiff-4.6.0: ok
librsvg-2.57.2:shared-mime-info-2.4: ok
librsvg-2.57.2:gdk-pixbuf-2.42.10: ok
librsvg-2.57.2: ok
fftw3-3.3.10p0:fftw3-common-3.3.10p0: ok
fftw3-3.3.10p0: ok
fftw3-float-3.3.10p0: ok
pulseaudio-17.0p0:opus-1.4: ok
pulseaudio-17.0p0:iso-codes-4.16.0: ok
pulseaudio-17.0p0:orc-0.4.32: ok
pulseaudio-17.0p0:gstreamer1-1.22.10: ok
pulseaudio-17.0p0:libogg-1.3.5: ok
pulseaudio-17.0p0:libtheora-1.2.20190601p0: ok
pulseaudio-17.0p0:libvorbis-1.3.7: ok
pulseaudio-17.0p0:graphene-1.10.8: ok
pulseaudio-17.0p0:epoll-shim-0.0.20230411: ok
pulseaudio-17.0p0:wayland-1.22.0p0: ok
pulseaudio-17.0p0:cdparanoia-3.a9.8p5: ok
pulseaudio-17.0p0:gstreamer1-plugins-base-1.22.10: ok
pulseaudio-17.0p0:dbus-1.14.10v0: ok
pulseaudio-17.0p0:tdb-1.4.9p1: ok
pulseaudio-17.0p0:dbus-daemon-launch-helper-1.14.10: ok
pulseaudio-17.0p0:duktape-2.7.0p1: ok
pulseaudio-17.0p0:polkit-124: ok
pulseaudio-17.0p0:consolekit2-1.2.6p3: ok
pulseaudio-17.0p0:mpg123-1.32.5: ok
pulseaudio-17.0p0:flac-1.4.3: ok
pulseaudio-17.0p0:lame-3.100p2: ok
pulseaudio-17.0p0:libsndfile-1.2.2: ok
pulseaudio-17.0p0:libltdl-2.4.2p2: ok
pulseaudio-17.0p0:speexdsp-1.2.1: ok
useradd: Warning: home directory `/var/run/pulse' doesn't exist, and -m was not specified
pulseaudio-17.0p0: ok
Running tags: ok
The following new rcscripts were installed: /etc/rc.d/messagebus
See rcctl(8) for details.
New and changed readme(s):
/usr/local/share/doc/pkg-readmes/consolekit2
/usr/local/share/doc/pkg-readmes/dbus
/usr/local/share/doc/pkg-readmes/glib2
+ cmake -B build -DBUILD_TESTING=ON
-- The C compiler identification is Clang 16.0.6
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.2")
-- Found Ncursesw: /usr/lib/libncursesw.so.15.0
-- Found Unistring: /usr/local/include
-- Checking for module 'libcurl'
-- Found libcurl, version 8.9.0
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed
-- Check if compiler accepts -pthread
-- Check if compiler accepts -pthread - yes
-- Found Threads: TRUE
CMake Deprecation Warning at termo/CMakeLists.txt:1 (cmake_minimum_required):
Compatibility with CMake < 3.5 will be removed from a future version of
CMake.
Update the VERSION argument <min> value or use a ...<max> suffix to tell
CMake that the project does not need compatibility with older versions.
-- Found Curses: /usr/lib/libcurses.so.15.0
-- Checking for modules 'glib-2.0;gio-2.0'
-- Found glib-2.0, version 2.78.6
-- Found gio-2.0, version 2.78.6
-- Checking for module 'unibilium>=0.1.0'
--
-- Checking for modules 'fftw3;fftw3f'
-- Found fftw3, version 3.3.10
-- Found fftw3f, version 3.3.10
-- Checking for module 'libpulse'
-- Found libpulse, version 17.0
-- Checking for modules 'x11;xrender;xft;fontconfig;libpng'
-- Found x11, version 1.8.1
-- Found xrender, version 0.9.11
-- Found xft, version 2.3.8
-- Found fontconfig, version 2.14.1
-- Found libpng, version 1.6.43
-- Looking for resizeterm
-- Looking for resizeterm - found
CMake Warning at CMakeLists.txt:159 (message):
Neither asciidoctor nor a2x were found, falling back to a substandard
manual page generator
-- Configuring done (21.8s)
-- Generating done (0.4s)
-- Build files have been written to: /home/ci/nncmpp/build
+ cmake --build build -- package
[ 9%] Building C object termo/CMakeFiles/termo-static.dir/termo.c.o
[ 18%] Building C object termo/CMakeFiles/termo-static.dir/driver-csi.c.o
[ 27%] Building C object termo/CMakeFiles/termo-static.dir/driver-ti.c.o
[ 36%] Linking C static library libtermo-0.a
[ 36%] Built target termo-static
[ 45%] Generating nncmpp-actions.h
[ 54%] Building C object CMakeFiles/nncmpp.dir/nncmpp.c.o
[ 63%] Linking C executable nncmpp
nncmpp.c(CMakeFiles/nncmpp.dir/nncmpp.c.o:(str_make)): warning: strcpy() is almost always misused, please use strlcpy()
[ 63%] Built target nncmpp
[ 72%] Generating nncmpp 16x16 application icon
[ 81%] Generating nncmpp 32x32 application icon
[ 90%] Generating nncmpp 48x48 application icon
[ 90%] Built target icons
[100%] Generating man page for nncmpp
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: nncmpp
CPack: - Install project: nncmpp []
CPack: Create package
CPack: - package: /home/ci/nncmpp/build/nncmpp-2.1.1-OpenBSD-amd64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: nncmpp
CPack: - Install project: nncmpp []
CPack: Create package
CPack: - package: /home/ci/nncmpp/build/nncmpp-2.1.1-OpenBSD-amd64.zip generated.
+ cmake --build build -- test
Running tests...
[ 1%] Building C object termo/CMakeFiles/termo.dir/termo.c.o
[ 3%] Building C object termo/CMakeFiles/termo.dir/driver-csi.c.o
[ 5%] Building C object termo/CMakeFiles/termo.dir/driver-ti.c.o
[ 7%] Linking C shared library libtermo-0.so
[ 7%] Built target termo
[ 14%] Built target termo-static
[ 16%] Building C object termo/CMakeFiles/test-01base.dir/tests/01base.c.o
[ 17%] Building C object termo/CMakeFiles/test-01base.dir/tests/taplib.c.o
[ 19%] Linking C executable test-01base
[ 19%] Built target test-01base
[ 21%] Building C object termo/CMakeFiles/test-02getkey.dir/tests/02getkey.c.o
[ 23%] Building C object termo/CMakeFiles/test-02getkey.dir/tests/taplib.c.o
[ 25%] Linking C executable test-02getkey
[ 25%] Built target test-02getkey
[ 26%] Building C object termo/CMakeFiles/test-03utf8.dir/tests/03utf8.c.o
[ 28%] Building C object termo/CMakeFiles/test-03utf8.dir/tests/taplib.c.o
[ 30%] Linking C executable test-03utf8
[ 30%] Built target test-03utf8
[ 32%] Building C object termo/CMakeFiles/test-04flags.dir/tests/04flags.c.o
[ 33%] Building C object termo/CMakeFiles/test-04flags.dir/tests/taplib.c.o
[ 35%] Linking C executable test-04flags
[ 35%] Built target test-04flags
[ 37%] Building C object termo/CMakeFiles/test-05read.dir/tests/05read.c.o
/home/ci/nncmpp/termo/tests/05read.c:22:2: warning: call to undeclared function 'putenv'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
putenv ("TERM=vt100");
^
1 warning generated.
[ 39%] Building C object termo/CMakeFiles/test-05read.dir/tests/taplib.c.o
[ 41%] Linking C executable test-05read
[ 41%] Built target test-05read
[ 42%] Building C object termo/CMakeFiles/test-06buffer.dir/tests/06buffer.c.o
[ 44%] Building C object termo/CMakeFiles/test-06buffer.dir/tests/taplib.c.o
[ 46%] Linking C executable test-06buffer
[ 46%] Built target test-06buffer
[ 48%] Building C object termo/CMakeFiles/test-10keyname.dir/tests/10keyname.c.o
[ 50%] Building C object termo/CMakeFiles/test-10keyname.dir/tests/taplib.c.o
[ 51%] Linking C executable test-10keyname
[ 51%] Built target test-10keyname
[ 53%] Building C object termo/CMakeFiles/test-11strfkey.dir/tests/11strfkey.c.o
[ 55%] Building C object termo/CMakeFiles/test-11strfkey.dir/tests/taplib.c.o
[ 57%] Linking C executable test-11strfkey
[ 57%] Built target test-11strfkey
[ 58%] Building C object termo/CMakeFiles/test-12strpkey.dir/tests/12strpkey.c.o
[ 60%] Building C object termo/CMakeFiles/test-12strpkey.dir/tests/taplib.c.o
[ 62%] Linking C executable test-12strpkey
[ 62%] Built target test-12strpkey
[ 64%] Building C object termo/CMakeFiles/test-13cmpkey.dir/tests/13cmpkey.c.o
[ 66%] Building C object termo/CMakeFiles/test-13cmpkey.dir/tests/taplib.c.o
[ 67%] Linking C executable test-13cmpkey
[ 67%] Built target test-13cmpkey
[ 69%] Building C object termo/CMakeFiles/test-20canon.dir/tests/20canon.c.o
[ 71%] Building C object termo/CMakeFiles/test-20canon.dir/tests/taplib.c.o
[ 73%] Linking C executable test-20canon
[ 73%] Built target test-20canon
[ 75%] Building C object termo/CMakeFiles/test-30mouse.dir/tests/30mouse.c.o
[ 76%] Building C object termo/CMakeFiles/test-30mouse.dir/tests/taplib.c.o
[ 78%] Linking C executable test-30mouse
[ 78%] Built target test-30mouse
[ 80%] Building C object termo/CMakeFiles/test-31position.dir/tests/31position.c.o
[ 82%] Building C object termo/CMakeFiles/test-31position.dir/tests/taplib.c.o
[ 83%] Linking C executable test-31position
[ 83%] Built target test-31position
[ 85%] Building C object termo/CMakeFiles/test-32modereport.dir/tests/32modereport.c.o
[ 87%] Building C object termo/CMakeFiles/test-32modereport.dir/tests/taplib.c.o
[ 89%] Linking C executable test-32modereport
[ 89%] Built target test-32modereport
[ 91%] Building C object termo/CMakeFiles/test-33focus.dir/tests/33focus.c.o
[ 92%] Building C object termo/CMakeFiles/test-33focus.dir/tests/taplib.c.o
[ 94%] Linking C executable test-33focus
[ 94%] Built target test-33focus
[ 96%] Building C object termo/CMakeFiles/test-39csi.dir/tests/39csi.c.o
[ 98%] Building C object termo/CMakeFiles/test-39csi.dir/tests/taplib.c.o
[100%] Linking C executable test-39csi
[100%] Built target test-39csi
Test project /home/ci/nncmpp/build
Start 1: test-xmllint-nncmpp.svg
1/17 Test #1: test-xmllint-nncmpp.svg .......... Passed 0.02 sec
Start 2: termo.01base
2/17 Test #2: termo.01base ..................... Passed 0.03 sec
Start 3: termo.02getkey
3/17 Test #3: termo.02getkey ................... Passed 0.01 sec
Start 4: termo.03utf8
4/17 Test #4: termo.03utf8 ..................... Passed 0.01 sec
Start 5: termo.04flags
5/17 Test #5: termo.04flags .................... Passed 0.01 sec
Start 6: termo.05read
6/17 Test #6: termo.05read ..................... Passed 0.01 sec
Start 7: termo.06buffer
7/17 Test #7: termo.06buffer ................... Passed 0.01 sec
Start 8: termo.10keyname
8/17 Test #8: termo.10keyname .................. Passed 0.01 sec
Start 9: termo.11strfkey
9/17 Test #9: termo.11strfkey .................. Passed 0.01 sec
Start 10: termo.12strpkey
10/17 Test #10: termo.12strpkey .................. Passed 0.01 sec
Start 11: termo.13cmpkey
11/17 Test #11: termo.13cmpkey ................... Passed 0.01 sec
Start 12: termo.20canon
12/17 Test #12: termo.20canon .................... Passed 0.01 sec
Start 13: termo.30mouse
13/17 Test #13: termo.30mouse .................... Passed 0.01 sec
Start 14: termo.31position
14/17 Test #14: termo.31position ................. Passed 0.01 sec
Start 15: termo.32modereport
15/17 Test #15: termo.32modereport ............... Passed 0.01 sec
Start 16: termo.33focus
16/17 Test #16: termo.33focus .................... Passed 0.01 sec
Start 17: termo.39csi
17/17 Test #17: termo.39csi ...................... Passed 0.01 sec
100% tests passed, 0 tests failed out of 17
Total Test time (real) = 0.23 sec