Tasks » 170

Project
p/liberty
Commit
aacf1b1d47824de2c924874e3d6cdad1d8b5ba2b
Runner
Alpine 3.20
State
Success
Notified
1

Runner log

+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/      /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7lSeaBIOS (version Arch Linux 1.16.3-1-1)


iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
                                                                               


Booting from Hard Disk...

SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
e%@)0(B[?25lAlpine will be booted automatically in 1 secondsAlpine will be booted automatically in 1 seconds..                                                                                                   [?25h 
Loading vmlinuz-virt...Loading vmlinuz-virt...  ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk

c[?7l[    0.000000] Linux version 6.6.34-1-virt (buildozer@build-3-20-x86_64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #2-Alpine SMP PREEMPT_DYNAMIC Tue, 18 Jun 2024 10:38:37 +0000
[    0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 1610396975 cycles
[    0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000008] tsc: Detected 1696.074 MHz processor
[    0.001166] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[    0.001213] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.001218] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001538] RAMDISK: [mem 0x7f6be000-0x7ffd9fff]
[    0.001544] ACPI: Early table checksum verification disabled
[    0.001549] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[    0.001559] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001569] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001578] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001584] ACPI: FACS 0x000000007FFE0000 000040
[    0.001590] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001596] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001602] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001606] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[    0.001609] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[    0.001610] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[    0.001611] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[    0.001613] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[    0.001614] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[    0.002105] Zone ranges:
[    0.002107]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002110]   DMA32    [mem 0x0000000001000000-0x000000007ffd9fff]
[    0.002113]   Normal   empty
[    0.002114] Movable zone start for each node
[    0.002115] Early memory node ranges
[    0.002116]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002118]   node   0: [mem 0x0000000000100000-0x000000007ffd9fff]
[    0.002121] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[    0.002506] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.002535] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.013345] On node 0, zone DMA32: 38 pages in unavailable ranges
[    0.014224] ACPI: PM-Timer IO Port: 0x608
[    0.014251] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.014335] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.014344] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.014348] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.014351] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.014354] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.014357] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.014368] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.014371] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.014381] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.014414] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.014447] [mem 0x80000000-0xfeffbfff] available for PCI devices
[    0.014450] Booting paravirtualized kernel on KVM
[    0.014453] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.022207] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.022834] percpu: Embedded 57 pages/cpu s195560 r8192 d29720 u1048576
[    0.022884] kvm-guest: PV spinlocks disabled, no host support
[    0.022885] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[    0.022963] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[    0.023563] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.024040] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.024147] Built 1 zonelists, mobility grouping on.  Total pages: 515802
[    0.024789] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.031378] Memory: 2012816K/2096608K available (14336K kernel code, 1799K rwdata, 8232K rodata, 2696K init, 2032K bss, 83532K reserved, 0K cma-reserved)
[    0.042671] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.042830] Kernel/User page tables isolation: enabled
[    0.044084] Dynamic Preempt: none
[    0.044229] rcu: Preemptible hierarchical RCU implementation.
[    0.044230] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.044233] 	Trampoline variant of Tasks RCU enabled.
[    0.044234] 	Tracing variant of Tasks RCU enabled.
[    0.044235] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.044236] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.049508] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[    0.049789] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.050038] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.058861] Console: colour VGA+ 80x25
[    0.058927] printk: console [ttyS0] enabled
[    0.258177] ACPI: Core revision 20230628
[    0.260215] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.263820] APIC: Switch to symmetric I/O mode setup
[    0.266099] x2apic enabled
[    0.267697] APIC: Switched APIC routing to: physical x2apic
[    0.271774] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.274126] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[    0.278766] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960740)
[    0.281869] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.283815] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.288781] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.291892] Spectre V2 : Mitigation: Retpolines
[    0.293536] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.296491] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.298769] Speculative Store Bypass: Vulnerable
[    0.300445] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.302779] MMIO Stale Data: Unknown: No mitigations
[    0.304535] x86/fpu: x87 FPU will use FXSAVE
[    0.331915] Freeing SMP alternatives memory: 32K
[    0.333653] pid_max: default: 32768 minimum: 301
[    0.336304] LSM: initializing lsm=lockdown,capability,landlock,integrity
[    0.340408] landlock: Up and running.
[    0.342088] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.344754] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.468897] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[    0.472578] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.475102] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.477821] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[    0.478810] signal: max sigframe size: 1440
[    0.480370] rcu: Hierarchical SRCU implementation.
[    0.482052] rcu: 	Max phase no-delay instances is 1000.
[    0.484293] NMI watchdog: Perf NMI watchdog permanently disabled
[    0.488848] smp: Bringing up secondary CPUs ...
[    0.490639] smpboot: x86: Booting SMP configuration:
[    0.492395] .... node  #0, CPUs:      #1
[    0.503506] smp: Brought up 1 node, 2 CPUs
[    0.503506] smpboot: Max logical packages: 1
[    0.508766] ----------------
[    0.509780] | NMI testsuite:
[    0.510536] --------------------
[    0.511336]   remote IPI:  ok  |
[    0.512162]    local IPI:  ok  |
[    0.512976] --------------------
[    0.513792] Good, all   2 testcases passed! |
[    0.515149] ---------------------------------
[    0.516687] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[    0.519207] devtmpfs: initialized
[    0.520031] x86/mm: Memory block size: 128MB
[    0.521958] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.522282] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.530608] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.532866] audit: initializing netlink subsys (disabled)
[    0.534832] audit: type=2000 audit(1730973720.777:1): state=initialized audit_enabled=0 res=1
[    0.534832] thermal_sys: Registered thermal governor 'step_wise'
[    0.538799] cpuidle: using governor ladder
[    0.541697] cpuidle: using governor menu
[    0.542965] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.545232] PCI: Using configuration type 1 for base access
[    0.546924] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.549560] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.556911] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.559108] ACPI: Added _OSI(Module Device)
[    0.559914] ACPI: Added _OSI(Processor Device)
[    0.561117] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.562451] ACPI: Added _OSI(Processor Aggregator Device)
[    0.563970] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.568818] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[    0.570440] ACPI: Interpreter enabled
[    0.571356] ACPI: PM: (supports S0 S3 S5)
[    0.572341] ACPI: Using IOAPIC for interrupt routing
[    0.573590] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.575820] PCI: Using E820 reservations for host bridge windows
[    0.575820] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.575820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.576250] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[    0.578767] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.581234] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[    0.584467] acpiphp: Slot [3] registered
[    0.585482] acpiphp: Slot [4] registered
[    0.586491] acpiphp: Slot [5] registered
[    0.588793] acpiphp: Slot [6] registered
[    0.589806] acpiphp: Slot [7] registered
[    0.590800] acpiphp: Slot [8] registered
[    0.591978] acpiphp: Slot [9] registered
[    0.593382] acpiphp: Slot [10] registered
[    0.594828] acpiphp: Slot [11] registered
[    0.596262] acpiphp: Slot [12] registered
[    0.597707] acpiphp: Slot [13] registered
[    0.598804] acpiphp: Slot [14] registered
[    0.600170] acpiphp: Slot [15] registered
[    0.601434] acpiphp: Slot [16] registered
[    0.602590] acpiphp: Slot [17] registered
[    0.603636] acpiphp: Slot [18] registered
[    0.604665] acpiphp: Slot [19] registered
[    0.605679] acpiphp: Slot [20] registered
[    0.606698] acpiphp: Slot [21] registered
[    0.607811] acpiphp: Slot [22] registered
[    0.608792] acpiphp: Slot [23] registered
[    0.609948] acpiphp: Slot [24] registered
[    0.611168] acpiphp: Slot [25] registered
[    0.612319] acpiphp: Slot [26] registered
[    0.613577] acpiphp: Slot [27] registered
[    0.614758] acpiphp: Slot [28] registered
[    0.615911] acpiphp: Slot [29] registered
[    0.617083] acpiphp: Slot [30] registered
[    0.618791] acpiphp: Slot [31] registered
[    0.619957] PCI host bridge to bus 0000:00
[    0.621136] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.623074] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.624975] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.627057] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.628763] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[    0.630889] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.632534] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.635416] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.639134] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.645790] pci 0000:00:01.1: reg 0x20: [io  0xc120-0xc12f]
[    0.649260] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.651791] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.654461] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.656924] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.659089] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.661976] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.664177] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.666284] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.669521] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.674783] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[    0.687192] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.689053] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.691834] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[    0.694675] pci 0000:00:03.0: reg 0x10: [io  0xc100-0xc11f]
[    0.698247] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.704537] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[    0.710052] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.714219] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.719628] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.722739] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.731667] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[    0.738088] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[    0.740375] pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0ff]
[    0.743357] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.752418] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[    0.757771] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.758945] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.761438] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.763063] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.764648] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[    0.766676] iommu: Default domain type: Translated
[    0.767883] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.769087] SCSI subsystem initialized
[    0.770285] pps_core: LinuxPPS API ver. 1 registered
[    0.770285] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.772348] PTP clock support registered
[    0.779291] PCI: Using ACPI for IRQ routing
[    0.780644] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.780644] clocksource: Switched to clocksource kvm-clock
[    0.781714] VFS: Disk quotas dquot_6.6.0
[    0.782938] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.785019] pnp: PnP ACPI init
[    0.786409] pnp: PnP ACPI: found 6 devices
[    0.795546] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.798386] NET: Registered PF_INET protocol family
[    0.799900] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.803582] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.806002] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.808588] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.811318] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.813496] TCP: Hash tables configured (established 16384 bind 16384)
[    0.815331] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[    0.817231] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.818892] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.820892] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.823149] NET: Registered PF_XDP protocol family
[    0.824864] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.827023] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.829182] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.831619] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.834019] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[    0.836152] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.837795] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.839592] PCI: CLS 0 bytes, default 64
[    0.840824] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[    0.840920] Unpacking initramfs...
[    0.844798] Initialise system trusted keyrings
[    0.847062] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.849343] zbud: loaded
[    0.850428] Key type asymmetric registered
[    0.851916] Asymmetric key parser 'x509' registered
[    0.853681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.856353] io scheduler mq-deadline registered
[    0.857953] io scheduler kyber registered
[    0.859454] io scheduler bfq registered
[    0.861287] ERST DBG: ERST support is disabled.
[    0.887073] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    0.914526] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[    0.944577] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[    0.950598] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.953179] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.959213] VMware PVSCSI driver - version 1.0.7.0-k
[    0.962476] scsi host0: ata_piix
[    0.964007] scsi host1: ata_piix
[    0.965243] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[    0.967628] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[    0.970187] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.974184] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.975938] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.977775] rtc_cmos 00:05: RTC can wake from S4
[    0.981170] rtc_cmos 00:05: registered as rtc0
[    0.982868] rtc_cmos 00:05: setting system clock to 2024-11-07T10:02:00 UTC (1730973720)
[    0.985782] Freeing initrd memory: 9328K
[    0.985809] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.989577] intel_pstate: CPU model not supported
[    0.991592] gre: GRE over IPv4 demultiplexor driver
[    1.008862] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.013402] NET: Registered PF_INET6 protocol family
[    1.015550] Segment Routing with IPv6
[    1.016891] In-situ OAM (IOAM) with IPv6
[    1.018399] Key type dns_resolver registered
[    1.020053] IPI shorthand broadcast: enabled
[    1.023961] sched_clock: Marking stable (800962565, 218953546)->(1023038373, -3122262)
[    1.028081] registered taskstats version 1
[    1.029672] Loading compiled-in X.509 certificates
[    1.039885] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[    1.044779] Key type .fscrypt registered
[    1.045784] Key type fscrypt-provisioning registered
[    1.149599] ata2: found unknown device (class 0)
[    1.151702] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.154990] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.211577] Freeing unused kernel image (initmem) memory: 2696K
[    1.212900] Write protecting the kernel read-only data: 24576k
[    1.214870] Freeing unused kernel image (rodata/data gap) memory: 2008K
[    1.216259] rodata_test: all tests were successful
[    1.217257] Run /init as init process
[    1.232529] Alpine Init 3.10.1-r0
Alpine Init 3.10.1-r0
[    1.234371] Loading boot drivers...
 * Loading boot drivers: [    1.279678] ACPI: bus type USB registered
[    1.280911] usbcore: registered new interface driver usbfs
[    1.282424] usbcore: registered new interface driver hub
[    1.283916] usbcore: registered new device driver usb
[    1.291050] usbcore: registered new interface driver usb-storage
[    1.485672] loop: module loaded
[    1.532703] ACPI: bus type drm_connector registered
[    1.573283] Loading boot drivers: ok.
ok.
[    1.576586] Mounting root...
 * Mounting root: [    1.622318] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[    1.645003] [drm] Found bochs VGA, ID 0xb0c5.
[    1.645920] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[    1.649593] [drm] Found EDID data blob.
[    1.650707] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[    1.668554] Console: switching to colour frame buffer device 160x50
[    1.672205] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    1.770225] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.771652] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.889956] virtio_blk virtio1: 2/0/0 default/read/poll queues
[    1.892464] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[    1.895227] virtio_blk virtio2: 2/0/0 default/read/poll queues
[    1.897672] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[    2.057275] block sr0: the capability attribute has been deprecated.
[    4.924593] EXT4-fs (vda): mounted filesystem 0487f251-c6cb-4a79-b6c6-03b1b5c178de ro with ordered data mode. Quota mode: none.
[    4.927967] Mounting root: ok.
ok.

   OpenRC 0.54 is starting up Linux 6.6.34-1-virt (x86_64)

 * /proc is already mounted
 * Mounting /run ... [ ok ]
 * /run/openrc: creating directory
 * /run/lock: creating directory
 * /run/lock: correcting owner
 * Caching service dependencies ... [ ok ]
 * Remounting devtmpfs on /dev ... [ ok ]
 * Mounting /dev/mqueue ... [ ok ]
 * Mounting security filesystem ... [ ok ]
 * Mounting debug filesystem ... [ ok ]
 * Mounting persistent storage (pstore) filesystem ... [ ok ]
 * Starting busybox mdev ... [ ok ]
 * Scanning hardware for mdev ... [ ok ]
 * Loading hardware drivers ... [ ok ]
 * Loading modules ... [ ok ]
 * Setting system clock using the hardware clock [UTC] ... [ ok ]
 * Checking local filesystems  .../: clean, 5560/50200 files, 163595/200704 blocks
 [ ok ]
 * Remounting root filesystem read/write ... [ ok ]
 * Remounting filesystems ... [ ok ]
 * Activating swap devices ... [ ok ]
 * Mounting local filesystems ... [ ok ]
 * Starting busybox acpid ... [ ok ]
 * Configuring kernel parameters ... [ ok ]
 * Migrating /var/lock to /run/lock ... [ ok ]
 * Creating user login records ... [ ok ]
 * Cleaning /tmp directory ... [ ok ]
 * cloud-init local ...Cloud-init v. 24.1.3 running 'init-local' at Thu, 07 Nov 2024 10:02:09 +0000. Up 10.38 seconds.
 [ ok ]
 * Setting hostname ... [ ok ]
 * Starting busybox syslog ... [ ok ]
 * Starting networking ... *   lo ... [ ok ]
 *   eth0 ... [ ok ]
 * Starting chronyd ... [ ok ]
 * Starting cloud-init-hotplugd ... [ ok ]
 * cloud-init init ...Cloud-init v. 24.1.3 running 'init' at Thu, 07 Nov 2024 10:02:22 +0000. Up 22.56 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device |  Up  |          Address           |      Mask     | Scope  |     Hw-Address    |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: |  eth0  | True |         10.0.2.15          | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: |  eth0  | True | fec0::5054:ff:fe12:3456/64 |       .       |  site  | 52:54:00:12:34:56 |
ci-info: |  eth0  | True | fe80::5054:ff:fe12:3456/64 |       .       |  link  | 52:54:00:12:34:56 |
ci-info: |   lo   | True |         127.0.0.1          |   255.0.0.0   |  host  |         .         |
ci-info: |   lo   | True |          ::1/128           |       .       |  host  |         .         |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway  |    Genmask    | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: |   0   |   0.0.0.0   | 10.0.2.2 |    0.0.0.0    |    eth0   |   UG  |
ci-info: |   1   |   10.0.2.0  | 0.0.0.0  | 255.255.255.0 |    eth0   |   U   |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: |   0   |  fe80::/64  |    ::   |    eth0   |   U   |
ci-info: |   1   |  fec0::/64  |    ::   |    eth0   |   Ue  |
ci-info: |   2   |     ::/0    | fe80::2 |    eth0   |  UGe  |
ci-info: |   4   |    local    |    ::   |    eth0   |   U   |
ci-info: |   5   |    local    |    ::   |    eth0   |   U   |
ci-info: |   6   |  multicast  |    ::   |    eth0   |   U   |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:SJ3QjgAOGqyz2gid0S4RCKNSf4h3b1TFr2NwEWRfEzk root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
|B.o.  ..  .+=. o+|
|+B.o.. o.o .o. E.|
|= oo+.+o+    o. .|
|+ o..+.+. . . .  |
| + =  . S  o .   |
|o + .  .    +    |
|oo .       . .   |
|o .              |
|                 |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:shFNBNKkWWnmJ7Hq1164nexiQuV4Fk18EL1J/9MOerM root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
|    .o++o.o+     |
|     =*o  o +    |
|    o+.o.o o +   |
|      +.+ . o .  |
|     .o*S.     ..|
|    . o++.    ..o|
|   . ..+. .  . o.|
|    . o += .. o .|
|     . +oo=  .Eo |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:SKV4sPyU+MiQKA3HKwty8jY8zcl+eJ4OhVVZL7S+Ja4 root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
|... .   ooo      |
| =.o = =.. o     |
|o +.= B   o .    |
|* oo X . . .     |
|oB ++.= S o .    |
|. * =.   . +     |
| . +..    o      |
|    o.o. .       |
|     =+ E        |
+----[SHA256]-----+
 [ ok ]
 * cloud-init config ...Cloud-init v. 24.1.3 running 'modules:config' at Thu, 07 Nov 2024 10:02:24 +0000. Up 25.36 seconds.
 [ ok ]
 * cloud-init final ...Cloud-init v. 24.1.3 running 'modules:final' at Thu, 07 Nov 2024 10:02:26 +0000. Up 26.62 seconds.
2024-11-07 10:02:26,408 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240705-r0)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
OK: 144 MiB in 151 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: |   Keytype   |                                       Fingerprint (sha256)                                      | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 |    -    |   acid  |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:shFNBNKkWWnmJ7Hq1164nexiQuV4Fk18EL1J/9MOerM root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:SKV4sPyU+MiQKA3HKwty8jY8zcl+eJ4OhVVZL7S+Ja4 root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:SJ3QjgAOGqyz2gid0S4RCKNSf4h3b1TFr2NwEWRfEzk root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBANOZdCL0TREidjNLoKxMNJtpYVlzd5/3Drh25hc8Gcjlk7Rh/tk98O9MCrHychJuFK2AO/GEkdvw6hH+9WsYP8= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJ8FnDfZPdc8q/2hDFFnD4+2PAJo40VIhXyhwctRtQTJ root@alpine-ci
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABgQC6YUJflkGai59oIjq+SYYqes8eizpbpmGAmlu5+ETR+KylWK2yCRf3FQeVVfHSV0rgrDYsMuw+wy1DigHb3WtOnKJinKy+ybtieg1aIa3weViOOBmPCB26RlwsCrePAmS1sl7QDeR3xozx/l3CAiUweNJPrVprxmqzaxBrwxKq1u/0N036h+J+7rIJZbylq4Mw0Dzd41AbWGvkhn10mXOLkTD7T34eBz9D24AyTeJxWmbRubKEgAoiOHucYmDK7QLs75ulIkW6JGcngNw2M4iBZYAzBxF+FTzKvYEJmbhjdAVApBvmh3/wBRPjkyFkXFzCqdZhLFHzyIF3tyqwkfAemieL9doNmZUAM3vJwQ6mLqMTkZy5dqdrLPrrmT5tWVpPCKXtSwCNynTjTf0ba3cPvr8r6W0M6/et78hHx8757xb30skgXSeTe2JhGH70AJtkln586cOVZAiBMNUhMMVoWLyk75WZNhkAHcJDBtAp4l43g2v35GgF4qEeRxyMK3U= root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.1.3 finished at Thu, 07 Nov 2024 10:02:28 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net].  Up 29.17 seconds
 [ ok ]

Welcome to Alpine Linux 3.20
Kernel 6.6.34-1-virt on an x86_64 (/dev/ttyS0)

alpine-ci login: 

Task log

........
status: done
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.4-r0 -> 2.14.4-r1)
Executing busybox-1.36.1-r29.trigger
Continuing the upgrade transaction with new apk-tools:
(1/27) Upgrading alpine-release (3.20.1-r0 -> 3.20.3-r0)
(2/27) Upgrading ca-certificates-bundle (20240226-r0 -> 20240705-r0)
(3/27) Upgrading libcrypto3 (3.3.1-r0 -> 3.3.2-r1)
(4/27) Upgrading libssl3 (3.3.1-r0 -> 3.3.2-r1)
(5/27) Upgrading alpine-base (3.20.1-r0 -> 3.20.3-r0)
(6/27) Upgrading ncurses-terminfo-base (6.4_p20240420-r0 -> 6.4_p20240420-r1)
(7/27) Upgrading libncursesw (6.4_p20240420-r0 -> 6.4_p20240420-r1)
(8/27) Upgrading libexpat (2.6.2-r0 -> 2.6.3-r0)
(9/27) Upgrading xz-libs (5.6.1-r3 -> 5.6.2-r0)
(10/27) Upgrading libpanelw (6.4_p20240420-r0 -> 6.4_p20240420-r1)
(11/27) Upgrading python3 (3.12.3-r1 -> 3.12.7-r0)
(12/27) Upgrading python3-pycache-pyc0 (3.12.3-r1 -> 3.12.7-r0)
(13/27) Upgrading pyc (3.12.3-r1 -> 3.12.7-r0)
(14/27) Upgrading py3-requests (2.31.0-r2 -> 2.32.3-r0)
(15/27) Upgrading py3-requests-pyc (2.31.0-r2 -> 2.32.3-r0)
(16/27) Upgrading tzdata (2024a-r1 -> 2024b-r0)
(17/27) Upgrading python3-pyc (3.12.3-r1 -> 3.12.7-r0)
(18/27) Upgrading linux-virt (6.6.34-r1 -> 6.6.59-r0)
(19/27) Upgrading openssh-keygen (9.7_p1-r3 -> 9.7_p1-r4)
(20/27) Upgrading openssh-client-common (9.7_p1-r3 -> 9.7_p1-r4)
(21/27) Upgrading openssh-client-default (9.7_p1-r3 -> 9.7_p1-r4)
(22/27) Upgrading openssh-sftp-server (9.7_p1-r3 -> 9.7_p1-r4)
(23/27) Upgrading openssh-server-common (9.7_p1-r3 -> 9.7_p1-r4)
(24/27) Upgrading openssh-server-common-openrc (9.7_p1-r3 -> 9.7_p1-r4)
(25/27) Upgrading openssh-server (9.7_p1-r3 -> 9.7_p1-r4)
(26/27) Upgrading openssh (9.7_p1-r3 -> 9.7_p1-r4)
(27/27) Upgrading openssh-server-pam (9.7_p1-r3 -> 9.7_p1-r4)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
Executing kmod-32-r0.trigger
Executing mkinitfs-3.10.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.59-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 144 MiB in 151 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.33.1-r0)
(3/10) Installing nghttp2-libs (1.62.1-r0)
(4/10) Installing libpsl (0.21.5-r1)
(5/10) Installing libcurl (8.11.0-r0)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.45.2-r0)
(8/10) Installing git-init-template (2.45.2-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r29.trigger
OK: 154 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/liberty.git liberty
Cloning into 'liberty'...
remote: Enumerating objects: 768, done.        
remote: Counting objects: 100% (237/237), done.        
remote: Compressing objects: 100% (234/234), done.        
remote: Total 768 (delta 141), reused 0 (delta 0), pack-reused 531 (from 1)        
Receiving objects: 100% (768/768), 389.02 KiB | 5.56 MiB/s, done.
Resolving deltas: 100% (462/462), done.
+ cd liberty
+ git -c 'advice.detachedHead=false' checkout aacf1b1d47824de2c924874e3d6cdad1d8b5ba2b
HEAD is now at aacf1b1 lxdrgen-go: improve usability
+ doas apk add --no-interactive build-base cmake openssl-dev pulseaudio-dev go nodejs
(1/108) Installing jansson (2.14-r4)
(2/108) Installing binutils (2.42-r0)
(3/108) Installing libmagic (5.45-r1)
(4/108) Installing file (5.45-r1)
(5/108) Installing libgomp (13.2.1_git20240309-r0)
(6/108) Installing libatomic (13.2.1_git20240309-r0)
(7/108) Installing isl26 (0.26-r1)
(8/108) Installing mpfr4 (4.2.1-r0)
(9/108) Installing mpc1 (1.3.1-r1)
(10/108) Installing gcc (13.2.1_git20240309-r0)
(11/108) Installing libstdc++-dev (13.2.1_git20240309-r0)
(12/108) Installing musl-dev (1.2.5-r0)
(13/108) Installing g++ (13.2.1_git20240309-r0)
(14/108) Installing make (4.4.1-r2)
(15/108) Installing fortify-headers (1.1-r3)
(16/108) Installing patch (2.7.6-r10)
(17/108) Installing build-base (0.5-r3)
(18/108) Installing lz4-libs (1.9.4-r5)
(19/108) Installing libarchive (3.7.7-r0)
(20/108) Installing rhash-libs (1.4.4-r0)
(21/108) Installing libuv (1.48.0-r0)
(22/108) Installing cmake (3.29.3-r0)
(23/108) Installing go (1.22.8-r0)
(24/108) Installing ada-libs (2.7.8-r0)
(25/108) Installing libbase64 (0.5.2-r0)
(26/108) Installing icu-data-en (74.2-r0)
Executing icu-data-en-74.2-r0.post-install
*
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
*
(27/108) Installing icu-libs (74.2-r0)
(28/108) Installing nodejs (20.15.1-r0)
(29/108) Installing pkgconf (2.2.0-r0)
(30/108) Installing openssl-dev (3.3.2-r1)
(31/108) Installing libintl (0.22.5-r0)
(32/108) Installing glib (2.80.5-r0)
(33/108) Installing libxau (1.0.11-r4)
(34/108) Installing libxdmcp (1.1.5-r1)
(35/108) Installing libxcb (1.16.1-r0)
(36/108) Installing libx11 (1.8.9-r1)
(37/108) Installing libasyncns (0.8-r3)
(38/108) Installing dbus-libs (1.14.10-r1)
(39/108) Installing libltdl (2.4.7-r3)
(40/108) Installing orc (0.4.40-r0)
(41/108) Installing libogg (1.3.5-r5)
(42/108) Installing libflac (1.4.3-r1)
(43/108) Installing alsa-lib (1.2.11-r0)
(44/108) Installing opus (1.5.2-r0)
(45/108) Installing libvorbis (1.3.7-r2)
(46/108) Installing libsndfile (1.2.2-r0)
(47/108) Installing soxr (0.1.3-r7)
(48/108) Installing speexdsp (1.2.1-r2)
(49/108) Installing tdb-libs (1.4.9-r1)
(50/108) Installing libpulse (17.0-r0)
(51/108) Installing libpulse-mainloop-glib (17.0-r0)
(52/108) Installing bzip2-dev (1.0.8-r6)
(53/108) Installing libxml2 (2.12.7-r0)
(54/108) Installing libxml2-utils (2.12.7-r0)
(55/108) Installing docbook-xml (4.5-r9)
Executing docbook-xml-4.5-r9.post-install
(56/108) Installing libgpg-error (1.49-r0)
(57/108) Installing libgcrypt (1.10.3-r0)
(58/108) Installing libxslt (1.1.39-r1)
(59/108) Installing docbook-xsl (1.79.2-r9)
Executing docbook-xsl-1.79.2-r9.post-install
(60/108) Installing xz (5.6.2-r0)
(61/108) Installing gettext-asprintf (0.22.5-r0)
(62/108) Installing gettext-libs (0.22.5-r0)
(63/108) Installing gettext-envsubst (0.22.5-r0)
(64/108) Installing gettext (0.22.5-r0)
(65/108) Installing gettext-dev (0.22.5-r0)
(66/108) Installing py3-parsing (3.1.2-r1)
(67/108) Installing py3-parsing-pyc (3.1.2-r1)
(68/108) Installing py3-packaging (24.0-r1)
(69/108) Installing py3-packaging-pyc (24.0-r1)
(70/108) Installing linux-headers (6.6-r0)
(71/108) Installing libffi-dev (3.4.6-r0)
(72/108) Installing bsd-compat-headers (0.7.2-r6)
(73/108) Installing libformw (6.4_p20240420-r1)
(74/108) Installing libmenuw (6.4_p20240420-r1)
(75/108) Installing libncurses++ (6.4_p20240420-r1)
(76/108) Installing ncurses-dev (6.4_p20240420-r1)
(77/108) Installing libedit-dev (20240517.3.1-r0)
(78/108) Installing zlib-dev (1.3.1-r1)
(79/108) Installing libpcre2-16 (10.43-r0)
(80/108) Installing libpcre2-32 (10.43-r0)
(81/108) Installing pcre2-dev (10.43-r0)
(82/108) Installing sqlite (3.45.3-r1)
(83/108) Installing sqlite-dev (3.45.3-r1)
(84/108) Installing util-linux (2.40.1-r1)
(85/108) Installing dmesg (2.40.1-r1)
(86/108) Installing setarch (2.40.1-r1)
(87/108) Installing util-linux-misc (2.40.1-r1)
(88/108) Installing runuser (2.40.1-r1)
(89/108) Installing losetup (2.40.1-r1)
(90/108) Installing hexdump (2.40.1-r1)
(91/108) Installing uuidgen (2.40.1-r1)
(92/108) Installing mcookie (2.40.1-r1)
(93/108) Installing agetty (2.40.1-r1)
(94/108) Installing agetty-openrc (0.54-r1)
(95/108) Installing wipefs (2.40.1-r1)
(96/108) Installing cfdisk (2.40.1-r1)
(97/108) Installing umount (2.40.1-r1)
(98/108) Installing util-linux-openrc (2.40.1-r1)
(99/108) Installing flock (2.40.1-r1)
(100/108) Installing lsblk (2.40.1-r1)
(101/108) Installing libcap-ng (0.8.5-r0)
(102/108) Installing setpriv (2.40.1-r1)
(103/108) Installing logger (2.40.1-r1)
(104/108) Installing fstrim (2.40.1-r1)
(105/108) Installing findmnt (2.40.1-r1)
(106/108) Installing util-linux-dev (2.40.1-r1)
(107/108) Installing glib-dev (2.80.5-r0)
(108/108) Installing pulseaudio-dev (17.0-r0)
Executing busybox-1.36.1-r29.trigger
Executing glib-2.80.5-r0.trigger
No schema files found: doing nothing.
OK: 737 MiB in 269 packages
+ cmake -B build
-- The C compiler identification is GNU 13.2.1
-- The CXX compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Checking for modules 'libssl;libcrypto'
--   Found libssl, version 3.3.2
--   Found libcrypto, version 3.3.2
-- Checking for module 'libpulse'
--   Found libpulse, version 17.0
CMake Warning at CMakeLists.txt:129 (message):
  Cannot test generated protocol code for Swift


-- Configuring done (1.3s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build
+ cmake --build build
[  4%] Building C object CMakeFiles/test-liberty.dir/tests/liberty.c.o
[  9%] Linking C executable test-liberty
[  9%] Built target test-liberty
[ 14%] Building C object CMakeFiles/test-proto.dir/tests/proto.c.o
In file included from /home/ci/liberty/tests/proto.c:34:
/home/ci/liberty/tests/proto.c: In function 'test_irc':
/home/ci/liberty/tests/../liberty.c:236:29: warning: right-hand operand of comma expression has no effect [-Wunused-value]
  236 |         ((condition) ? true :                                                      \
      |         ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  237 |                 (assertion_failure_handler (g_soft_asserts_are_deadly,                 \
      |                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  238 |                 __FILE__, __LINE__, __func__, #condition), false))
      |                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ci/liberty/tests/proto.c:56:25: note: in expansion of macro 'soft_assert'
   56 |                         soft_assert (!"found unexpected message tag");
      |                         ^~~~~~~~~~~
[ 19%] Linking C executable test-proto
[ 19%] Built target test-proto
[ 23%] Building C object CMakeFiles/test-xdg.dir/tests/xdg.c.o
[ 28%] Linking C executable test-xdg
[ 28%] Built target test-xdg
[ 33%] Building C object CMakeFiles/test-pulse.dir/tests/pulse.c.o
[ 38%] Linking C executable test-pulse
[ 38%] Built target test-pulse
[ 42%] Generating man page for libertyxdr
[ 42%] Built target docs
[ 47%] Generating test protocol code (c)
[ 52%] Generating test protocol code (cpp)
[ 57%] Generating test protocol code (go)
[ 61%] Generating test protocol code (mjs)
[ 66%] Generating test protocol code (swift)
[ 66%] Built target test-lxdrgen-outputs
[ 71%] Building C object CMakeFiles/test-lxdrgen-c.dir/tests/lxdrgen.c.o
[ 76%] Linking C executable test-lxdrgen-c
[ 80%] Built target test-lxdrgen-c
[ 85%] Building CXX object CMakeFiles/test-lxdrgen-cpp.dir/tests/lxdrgen.cpp.o
[ 90%] Building CXX object CMakeFiles/test-lxdrgen-cpp.dir/tools/lxdrgen-cpp-posix.cpp.o
[ 95%] Linking CXX executable test-lxdrgen-cpp
[100%] Built target test-lxdrgen-cpp
+ cmake --build build -- test
Running tests...
Test project /home/ci/liberty/build
    Start 1: test-liberty
1/9 Test #1: test-liberty .....................   Passed    0.03 sec
    Start 2: test-proto
2/9 Test #2: test-proto .......................   Passed    0.01 sec
    Start 3: test-xdg
3/9 Test #3: test-xdg .........................   Passed    0.00 sec
    Start 4: test-pulse
4/9 Test #4: test-pulse .......................   Passed    0.00 sec
    Start 5: test-cmake-parser
5/9 Test #5: test-cmake-parser ................   Passed    0.07 sec
    Start 6: test-lxdrgen-c
6/9 Test #6: test-lxdrgen-c ...................   Passed    0.00 sec
    Start 7: test-lxdrgen-cpp
7/9 Test #7: test-lxdrgen-cpp .................   Passed    0.01 sec
    Start 8: test-lxdrgen-go
8/9 Test #8: test-lxdrgen-go ..................   Passed   13.15 sec
    Start 9: test-lxdrgen-mjs
9/9 Test #9: test-lxdrgen-mjs .................   Passed    0.08 sec

100% tests passed, 0 tests failed out of 9

Total Test time (real) =  13.36 sec