- Project
- p/xK
- Commit
- fce8fd40cc0fe191c7b1de5c672ad42106031e94
- Runner
- Alpine 3.20
- State
- Failed (Scripts failed)
- Notified
- 1
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7l[2J[0mSeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
[2Je%@)0(B[0;37;40m[?25l[2J[23;16HAlpine will be booted automatically in [0;1m1[0m seconds[23;16H[0;37;40mAlpine will be booted automatically in [0;1;37;40m1[0;37;40m seconds..[23;16H [23;16H[0;37;40m [?25h[24;1H[0m
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
c[?7l[2J[ 0.000000] Linux version 6.6.34-1-virt (buildozer@build-3-20-x86_64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #2-Alpine SMP PREEMPT_DYNAMIC Tue, 18 Jun 2024 10:38:37 +0000
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1638309892 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000008] tsc: Detected 1696.074 MHz processor
[ 0.001164] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001210] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001215] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001426] RAMDISK: [mem 0x7f6be000-0x7ffd9fff]
[ 0.001430] ACPI: Early table checksum verification disabled
[ 0.001434] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[ 0.001441] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001451] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001460] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001466] ACPI: FACS 0x000000007FFE0000 000040
[ 0.001472] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001478] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001484] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001488] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[ 0.001491] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[ 0.001492] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.001494] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[ 0.001495] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[ 0.001496] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[ 0.001985] Zone ranges:
[ 0.001986] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.001990] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.001992] Normal empty
[ 0.001994] Movable zone start for each node
[ 0.001995] Early memory node ranges
[ 0.001995] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.001998] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.002000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.002391] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002435] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.012393] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.013122] ACPI: PM-Timer IO Port: 0x608
[ 0.013142] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.013207] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.013213] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013216] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.013218] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013220] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.013222] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.013229] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013231] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013238] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.013263] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.013287] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.013289] Booting paravirtualized kernel on KVM
[ 0.013291] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.020807] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.021425] percpu: Embedded 57 pages/cpu s195560 r8192 d29720 u1048576
[ 0.021472] kvm-guest: PV spinlocks disabled, no host support
[ 0.021473] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.021552] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.022130] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.022626] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.022728] Built 1 zonelists, mobility grouping on. Total pages: 515802
[ 0.023370] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.029943] Memory: 2012824K/2096608K available (14336K kernel code, 1799K rwdata, 8232K rodata, 2696K init, 2032K bss, 83524K reserved, 0K cma-reserved)
[ 0.041657] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.041812] Kernel/User page tables isolation: enabled
[ 0.043047] Dynamic Preempt: none
[ 0.043190] rcu: Preemptible hierarchical RCU implementation.
[ 0.043191] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.043193] Trampoline variant of Tasks RCU enabled.
[ 0.043194] Tracing variant of Tasks RCU enabled.
[ 0.043195] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.043196] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.048218] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.048463] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.048661] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.057357] Console: colour VGA+ 80x25
[ 0.057422] printk: console [ttyS0] enabled
[ 0.218750] ACPI: Core revision 20230628
[ 0.220445] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.223168] APIC: Switch to symmetric I/O mode setup
[ 0.225013] x2apic enabled
[ 0.226356] APIC: Switched APIC routing to: physical x2apic
[ 0.229884] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.231599] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.234564] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960740)
[ 0.236995] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.238454] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.240097] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.242443] Spectre V2 : Mitigation: Retpolines
[ 0.244562] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.246850] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.248687] Speculative Store Bypass: Vulnerable
[ 0.249961] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.251749] MMIO Stale Data: Unknown: No mitigations
[ 0.253122] x86/fpu: x87 FPU will use FXSAVE
[ 0.277328] Freeing SMP alternatives memory: 32K
[ 0.278635] pid_max: default: 32768 minimum: 301
[ 0.280878] LSM: initializing lsm=lockdown,capability,landlock,integrity
[ 0.284295] landlock: Up and running.
[ 0.284843] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.286897] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.410899] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.414348] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.414557] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.414557] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.414608] signal: max sigframe size: 1440
[ 0.416164] rcu: Hierarchical SRCU implementation.
[ 0.417882] rcu: Max phase no-delay instances is 1000.
[ 0.420112] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.422272] smp: Bringing up secondary CPUs ...
[ 0.424777] smpboot: x86: Booting SMP configuration:
[ 0.426508] .... node #0, CPUs: #1
[ 0.438244] smp: Brought up 1 node, 2 CPUs
[ 0.438244] smpboot: Max logical packages: 1
[ 0.444566] ----------------
[ 0.445578] | NMI testsuite:
[ 0.446581] --------------------
[ 0.447723] remote IPI: ok |
[ 0.448584] local IPI: ok |
[ 0.449384] --------------------
[ 0.450191] Good, all 2 testcases passed! |
[ 0.451414] ---------------------------------
[ 0.452624] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.455019] devtmpfs: initialized
[ 0.455581] x86/mm: Memory block size: 128MB
[ 0.457207] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.457409] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.464723] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.466561] audit: initializing netlink subsys (disabled)
[ 0.468139] audit: type=2000 audit(1731413697.265:1): state=initialized audit_enabled=0 res=1
[ 0.468139] thermal_sys: Registered thermal governor 'step_wise'
[ 0.468139] cpuidle: using governor ladder
[ 0.474577] cpuidle: using governor menu
[ 0.476092] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.478807] PCI: Using configuration type 1 for base access
[ 0.481043] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.485246] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.491782] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.494884] ACPI: Added _OSI(Module Device)
[ 0.496102] ACPI: Added _OSI(Processor Device)
[ 0.497689] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.499334] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.499334] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.504608] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.506372] ACPI: Interpreter enabled
[ 0.507269] ACPI: PM: (supports S0 S3 S5)
[ 0.508263] ACPI: Using IOAPIC for interrupt routing
[ 0.508263] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.508263] PCI: Using E820 reservations for host bridge windows
[ 0.510292] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.515999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.518137] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.520678] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.523085] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.525088] acpiphp: Slot [3] registered
[ 0.526069] acpiphp: Slot [4] registered
[ 0.527042] acpiphp: Slot [5] registered
[ 0.528285] acpiphp: Slot [6] registered
[ 0.529674] acpiphp: Slot [7] registered
[ 0.530832] acpiphp: Slot [8] registered
[ 0.531866] acpiphp: Slot [9] registered
[ 0.532836] acpiphp: Slot [10] registered
[ 0.534593] acpiphp: Slot [11] registered
[ 0.535610] acpiphp: Slot [12] registered
[ 0.536606] acpiphp: Slot [13] registered
[ 0.537622] acpiphp: Slot [14] registered
[ 0.538846] acpiphp: Slot [15] registered
[ 0.540256] acpiphp: Slot [16] registered
[ 0.541679] acpiphp: Slot [17] registered
[ 0.543129] acpiphp: Slot [18] registered
[ 0.544593] acpiphp: Slot [19] registered
[ 0.546010] acpiphp: Slot [20] registered
[ 0.547430] acpiphp: Slot [21] registered
[ 0.548853] acpiphp: Slot [22] registered
[ 0.550265] acpiphp: Slot [23] registered
[ 0.551769] acpiphp: Slot [24] registered
[ 0.553209] acpiphp: Slot [25] registered
[ 0.554591] acpiphp: Slot [26] registered
[ 0.556007] acpiphp: Slot [27] registered
[ 0.557423] acpiphp: Slot [28] registered
[ 0.558847] acpiphp: Slot [29] registered
[ 0.560251] acpiphp: Slot [30] registered
[ 0.561696] acpiphp: Slot [31] registered
[ 0.563141] PCI host bridge to bus 0000:00
[ 0.564563] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.566889] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.569228] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.571602] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.573676] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.574566] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.576161] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.578797] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.581638] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.590226] pci 0000:00:01.1: reg 0x20: [io 0xc120-0xc12f]
[ 0.593032] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.594565] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.596132] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.597944] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.600512] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.603206] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.604582] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.606688] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.612725] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.620747] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 0.630629] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.632875] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.635315] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.638330] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc11f]
[ 0.641290] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 0.648870] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.653466] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.656364] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.661601] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.666553] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 0.676863] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.684795] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.689032] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0ff]
[ 0.692351] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[ 0.702067] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.708065] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.710383] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.714734] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.716958] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.718523] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.720524] iommu: Default domain type: Translated
[ 0.721912] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.724897] SCSI subsystem initialized
[ 0.726183] pps_core: LinuxPPS API ver. 1 registered
[ 0.726183] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.728283] PTP clock support registered
[ 0.735109] PCI: Using ACPI for IRQ routing
[ 0.736422] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.736422] clocksource: Switched to clocksource kvm-clock
[ 0.737473] VFS: Disk quotas dquot_6.6.0
[ 0.738712] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.740503] pnp: PnP ACPI init
[ 0.741821] pnp: PnP ACPI: found 6 devices
[ 0.753601] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.755972] NET: Registered PF_INET protocol family
[ 0.757299] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.760469] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.762836] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.765362] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.767684] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.769798] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.772348] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.774970] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.777321] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.779921] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.781935] NET: Registered PF_XDP protocol family
[ 0.783613] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.785758] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.787918] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.790272] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.792663] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.795155] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.797185] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.799354] PCI: CLS 0 bytes, default 64
[ 0.800823] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.800971] Unpacking initramfs...
[ 0.804459] Initialise system trusted keyrings
[ 0.806712] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.808974] zbud: loaded
[ 0.810089] Key type asymmetric registered
[ 0.811483] Asymmetric key parser 'x509' registered
[ 0.813200] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.815805] io scheduler mq-deadline registered
[ 0.817369] io scheduler kyber registered
[ 0.818847] io scheduler bfq registered
[ 0.820924] ERST DBG: ERST support is disabled.
[ 0.869819] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.920803] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.948227] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.954702] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.957205] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.961337] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.964548] scsi host0: ata_piix
[ 0.966068] scsi host1: ata_piix
[ 0.967305] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 0.969678] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 0.972216] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.974708] Freeing initrd memory: 9328K
[ 0.978024] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.979868] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.981727] rtc_cmos 00:05: RTC can wake from S4
[ 0.984580] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.987753] rtc_cmos 00:05: registered as rtc0
[ 0.989213] rtc_cmos 00:05: setting system clock to 2024-11-12T12:14:57 UTC (1731413697)
[ 0.991688] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.993771] intel_pstate: CPU model not supported
[ 0.995208] gre: GRE over IPv4 demultiplexor driver
[ 1.012932] NET: Registered PF_INET6 protocol family
[ 1.015044] Segment Routing with IPv6
[ 1.016114] In-situ OAM (IOAM) with IPv6
[ 1.017279] Key type dns_resolver registered
[ 1.018867] IPI shorthand broadcast: enabled
[ 1.022728] sched_clock: Marking stable (851177535, 166083513)->(1028863845, -11602797)
[ 1.029048] registered taskstats version 1
[ 1.030611] Loading compiled-in X.509 certificates
[ 1.039602] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 1.044303] Key type .fscrypt registered
[ 1.045392] Key type fscrypt-provisioning registered
[ 1.146601] ata2: found unknown device (class 0)
[ 1.148849] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.151571] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.198857] Freeing unused kernel image (initmem) memory: 2696K
[ 1.200016] Write protecting the kernel read-only data: 24576k
[ 1.201873] Freeing unused kernel image (rodata/data gap) memory: 2008K
[ 1.203117] rodata_test: all tests were successful
[ 1.203975] Run /init as init process
[ 1.219057] Alpine Init 3.10.1-r0
Alpine Init 3.10.1-r0
[ 1.220539] Loading boot drivers...
* Loading boot drivers: [ 1.306853] ACPI: bus type USB registered
[ 1.308096] usbcore: registered new interface driver usbfs
[ 1.309535] usbcore: registered new interface driver hub
[ 1.310873] usbcore: registered new device driver usb
[ 1.319138] usbcore: registered new interface driver usb-storage
[ 1.495753] loop: module loaded
[ 1.542666] ACPI: bus type drm_connector registered
[ 1.583079] Loading boot drivers: ok.
ok.
[ 1.586666] Mounting root...
* Mounting root: [ 1.613896] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.634548] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.635740] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.640497] [drm] Found EDID data blob.
[ 1.641865] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 1.657918] Console: switching to colour frame buffer device 160x50
[ 1.661086] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.797398] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.799130] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.882940] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 1.885798] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.891789] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 1.894594] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.057680] block sr0: the capability attribute has been deprecated.
[ 4.968939] EXT4-fs (vda): mounted filesystem 0487f251-c6cb-4a79-b6c6-03b1b5c178de ro with ordered data mode. Quota mode: none.
[ 4.976293] Mounting root: ok.
ok.
OpenRC 0.54 is starting up Linux 6.6.34-1-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5560/50200 files, 163595/200704 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 24.1.3 running 'init-local' at Tue, 12 Nov 2024 12:15:07 +0000. Up 10.68 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ... [ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 24.1.3 running 'init' at Tue, 12 Nov 2024 12:15:18 +0000. Up 22.12 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::5054:ff:fe12:3456/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:B1nP1w5TG8crdoToCZDf/Rgl/Xi5qS/dK+RQOK/mVDc root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| .o . . ooo|
| . + + o *=|
| + + * Bo=|
| o * B.Bo|
| S . =.*E+|
| . ..+.+.|
| .= o .|
| .o = ..|
| o. +o.|
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:eFGiCzjLaNOm8T7ge0q+G5hJ4KI7NV841i6SUn3Abtw root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| . . |
| . . o |
|. o.. . . |
|oo.oo. o . |
|o*o* =o S |
|*+X O E. |
|**.B = |
|=o=oo . |
|.O*o.. |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:14EPtnmn8Kq3i2Pg6J8tF3tHYOdAiWHtjSLGqSvCOzM root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| o+ . |
| .. +. |
| . . o+o. |
| = ..**o. |
| o .So==+ . |
| . . .. +oo |
|. + . o .o |
|.E. o oo=.o.. |
| o=o..o++=++ |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 24.1.3 running 'modules:config' at Tue, 12 Nov 2024 12:15:20 +0000. Up 24.26 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 24.1.3 running 'modules:final' at Tue, 12 Nov 2024 12:15:21 +0000. Up 25.50 seconds.
2024-11-12 12:15:22,105 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240705-r0)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
OK: 144 MiB in 151 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:eFGiCzjLaNOm8T7ge0q+G5hJ4KI7NV841i6SUn3Abtw root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:14EPtnmn8Kq3i2Pg6J8tF3tHYOdAiWHtjSLGqSvCOzM root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:B1nP1w5TG8crdoToCZDf/Rgl/Xi5qS/dK+RQOK/mVDc root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBEXARX5tJT6Zo3ajgdeX9PIYlGXE3N6GXCgs0WNet5MgAz1P9PbieD3Ejb04ASsctxmztcaVYwHCf7jRpm9AMMw= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIO0BsKal03ZWrdaeihIecn/uCFFQ0fxkZs3iZSKqWoV8 root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.1.3 finished at Tue, 12 Nov 2024 12:15:24 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net]. Up 27.85 seconds
[ ok ]
Welcome to Alpine Linux 3.20
Kernel 6.6.34-1-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
.......
status: done
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.4-r0 -> 2.14.4-r1)
Executing busybox-1.36.1-r29.trigger
Continuing the upgrade transaction with new apk-tools:
(1/27) Upgrading alpine-release (3.20.1-r0 -> 3.20.3-r0)
(2/27) Upgrading ca-certificates-bundle (20240226-r0 -> 20240705-r0)
(3/27) Upgrading libcrypto3 (3.3.1-r0 -> 3.3.2-r1)
(4/27) Upgrading libssl3 (3.3.1-r0 -> 3.3.2-r1)
(5/27) Upgrading alpine-base (3.20.1-r0 -> 3.20.3-r0)
(6/27) Upgrading ncurses-terminfo-base (6.4_p20240420-r0 -> 6.4_p20240420-r1)
(7/27) Upgrading libncursesw (6.4_p20240420-r0 -> 6.4_p20240420-r1)
(8/27) Upgrading libexpat (2.6.2-r0 -> 2.6.4-r0)
(9/27) Upgrading xz-libs (5.6.1-r3 -> 5.6.2-r0)
(10/27) Upgrading libpanelw (6.4_p20240420-r0 -> 6.4_p20240420-r1)
(11/27) Upgrading python3 (3.12.3-r1 -> 3.12.7-r0)
(12/27) Upgrading python3-pycache-pyc0 (3.12.3-r1 -> 3.12.7-r0)
(13/27) Upgrading pyc (3.12.3-r1 -> 3.12.7-r0)
(14/27) Upgrading py3-requests (2.31.0-r2 -> 2.32.3-r0)
(15/27) Upgrading py3-requests-pyc (2.31.0-r2 -> 2.32.3-r0)
(16/27) Upgrading tzdata (2024a-r1 -> 2024b-r0)
(17/27) Upgrading python3-pyc (3.12.3-r1 -> 3.12.7-r0)
(18/27) Upgrading linux-virt (6.6.34-r1 -> 6.6.60-r0)
(19/27) Upgrading openssh-keygen (9.7_p1-r3 -> 9.7_p1-r4)
(20/27) Upgrading openssh-client-common (9.7_p1-r3 -> 9.7_p1-r4)
(21/27) Upgrading openssh-client-default (9.7_p1-r3 -> 9.7_p1-r4)
(22/27) Upgrading openssh-sftp-server (9.7_p1-r3 -> 9.7_p1-r4)
(23/27) Upgrading openssh-server-common (9.7_p1-r3 -> 9.7_p1-r4)
(24/27) Upgrading openssh-server-common-openrc (9.7_p1-r3 -> 9.7_p1-r4)
(25/27) Upgrading openssh-server (9.7_p1-r3 -> 9.7_p1-r4)
(26/27) Upgrading openssh (9.7_p1-r3 -> 9.7_p1-r4)
(27/27) Upgrading openssh-server-pam (9.7_p1-r3 -> 9.7_p1-r4)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
Executing kmod-32-r0.trigger
Executing mkinitfs-3.10.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.60-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 144 MiB in 151 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.33.1-r0)
(3/10) Installing nghttp2-libs (1.62.1-r0)
(4/10) Installing libpsl (0.21.5-r1)
(5/10) Installing libcurl (8.11.0-r2)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.45.2-r0)
(8/10) Installing git-init-template (2.45.2-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r29.trigger
OK: 154 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/xK.git xK
Cloning into 'xK'...
remote: Enumerating objects: 5264, done.
remote: Counting objects: 100% (1221/1221), done.
remote: Compressing objects: 100% (1106/1106), done.
remote: Total 5264 (delta 751), reused 155 (delta 71), pack-reused 4043 (from 1)
Receiving objects: 100% (5264/5264), 2.00 MiB | 4.84 MiB/s, done.
Resolving deltas: 100% (3462/3462), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Cloning into '/home/ci/xK/liberty'...
remote: Enumerating objects: 772, done.
remote: Counting objects: 100% (241/241), done.
remote: Compressing objects: 100% (238/238), done.
remote: Total 772 (delta 144), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (772/772), 389.97 KiB | 6.39 MiB/s, done.
Resolving deltas: 100% (465/465), done.
Submodule path 'liberty': checked out '492815c8fc38ad6e333b2f1c5094a329e3076155'
+ cd xK
+ git -c 'advice.detachedHead=false' checkout fce8fd40cc0fe191c7b1de5c672ad42106031e94
HEAD is now at fce8fd4 Bump xP dependencies
+ doas apk add --no-interactive build-base cmake pkgconf asciidoctor openssl-dev libffi-dev readline-dev libedit-dev lua5.4-dev perl
(1/45) Installing ruby-libs (3.3.6-r0)
(2/45) Installing libucontext (1.2-r3)
(3/45) Installing ruby (3.3.6-r0)
(4/45) Installing asciidoctor (2.0.23-r0)
(5/45) Installing jansson (2.14-r4)
(6/45) Installing binutils (2.42-r0)
(7/45) Installing libmagic (5.45-r1)
(8/45) Installing file (5.45-r1)
(9/45) Installing libgomp (13.2.1_git20240309-r0)
(10/45) Installing libatomic (13.2.1_git20240309-r0)
(11/45) Installing isl26 (0.26-r1)
(12/45) Installing mpfr4 (4.2.1-r0)
(13/45) Installing mpc1 (1.3.1-r1)
(14/45) Installing gcc (13.2.1_git20240309-r0)
(15/45) Installing libstdc++-dev (13.2.1_git20240309-r0)
(16/45) Installing musl-dev (1.2.5-r0)
(17/45) Installing g++ (13.2.1_git20240309-r0)
(18/45) Installing make (4.4.1-r2)
(19/45) Installing fortify-headers (1.1-r3)
(20/45) Installing patch (2.7.6-r10)
(21/45) Installing build-base (0.5-r3)
(22/45) Installing lz4-libs (1.9.4-r5)
(23/45) Installing libarchive (3.7.7-r0)
(24/45) Installing rhash-libs (1.4.4-r0)
(25/45) Installing libuv (1.48.0-r0)
(26/45) Installing cmake (3.29.3-r0)
(27/45) Installing bsd-compat-headers (0.7.2-r6)
(28/45) Installing libformw (6.4_p20240420-r1)
(29/45) Installing libmenuw (6.4_p20240420-r1)
(30/45) Installing libncurses++ (6.4_p20240420-r1)
(31/45) Installing pkgconf (2.2.0-r0)
(32/45) Installing ncurses-dev (6.4_p20240420-r1)
(33/45) Installing libedit-dev (20240517.3.1-r0)
(34/45) Installing linux-headers (6.6-r0)
(35/45) Installing libffi-dev (3.4.6-r0)
(36/45) Installing lua5.4-libs (5.4.6-r1)
(37/45) Installing lua5.4 (5.4.6-r1)
(38/45) Installing lua5.4-dev (5.4.6-r1)
(39/45) Installing openssl-dev (3.3.2-r1)
(40/45) Installing perl (5.38.2-r0)
(41/45) Installing perl-error (0.17029-r2)
(42/45) Installing perl-git (2.45.2-r0)
(43/45) Installing git-perl (2.45.2-r0)
(44/45) Installing libhistory (8.2.10-r0)
(45/45) Installing readline-dev (8.2.10-r0)
Executing busybox-1.36.1-r29.trigger
OK: 500 MiB in 206 packages
+ doas apk add --no-interactive mingw-w64-gcc i686-mingw-w64-gcc cmake make rsvg-convert icoutils sox
(1/67) Installing i686-mingw-w64-binutils (2.42-r0)
(2/67) Installing i686-mingw-w64-crt (11.0.1-r0)
(3/67) Installing i686-mingw-w64-headers (11.0.0-r1)
(4/67) Installing i686-mingw-w64-winpthreads (11.0.0-r2)
(5/67) Installing i686-mingw-w64-gcc (13.2.0-r2)
(6/67) Installing perl-http-date (6.06-r0)
(7/67) Installing perl-clone (0.46-r2)
(8/67) Installing perl-uri (5.28-r0)
(9/67) Installing perl-io-html (1.004-r1)
(10/67) Installing perl-encode-locale (1.05-r5)
(11/67) Installing perl-lwp-mediatypes (6.04-r3)
(12/67) Installing perl-http-message (6.45-r0)
(13/67) Installing perl-http-cookies (6.11-r0)
(14/67) Installing perl-net-http (6.23-r1)
(15/67) Installing perl-html-tagset (3.24-r0)
(16/67) Installing perl-html-parser (3.82-r0)
(17/67) Installing perl-file-listing (6.16-r0)
(18/67) Installing perl-www-robotrules (6.02-r5)
(19/67) Installing perl-http-negotiate (6.01-r5)
(20/67) Installing perl-try-tiny (0.31-r2)
(21/67) Installing perl-libwww (6.77-r0)
(22/67) Installing libpng (1.6.44-r0)
(23/67) Installing icoutils (0.32.3-r3)
(24/67) Installing mingw-w64-binutils (2.42-r0)
(25/67) Installing mingw-w64-crt (11.0.1-r0)
(26/67) Installing mingw-w64-headers (11.0.0-r1)
(27/67) Installing mingw-w64-winpthreads (11.0.0-r2)
(28/67) Installing mingw-w64-gcc (13.2.0-r2)
(29/67) Installing libxau (1.0.11-r4)
(30/67) Installing libxdmcp (1.1.5-r1)
(31/67) Installing libxcb (1.16.1-r0)
(32/67) Installing libx11 (1.8.9-r1)
(33/67) Installing libxext (1.3.6-r2)
(34/67) Installing libxrender (0.9.11-r5)
(35/67) Installing freetype (2.13.2-r0)
(36/67) Installing fontconfig (2.15.0-r1)
(37/67) Installing pixman (0.43.2-r0)
(38/67) Installing cairo (1.18.0-r0)
(39/67) Installing libintl (0.22.5-r0)
(40/67) Installing glib (2.80.5-r0)
(41/67) Installing libxml2 (2.12.7-r0)
(42/67) Installing shared-mime-info (2.4-r0)
(43/67) Installing libjpeg-turbo (3.0.3-r0)
(44/67) Installing libsharpyuv (1.3.2-r0)
(45/67) Installing libwebp (1.3.2-r0)
(46/67) Installing tiff (4.6.0t-r0)
(47/67) Installing gdk-pixbuf (2.42.12-r0)
(48/67) Installing libxft (2.3.8-r3)
(49/67) Installing fribidi (1.0.15-r0)
(50/67) Installing graphite2 (1.3.14-r6)
(51/67) Installing harfbuzz (8.5.0-r0)
(52/67) Installing pango (1.52.2-r0)
(53/67) Installing rsvg-convert (2.58.5-r0)
(54/67) Installing libogg (1.3.5-r5)
(55/67) Installing libflac (1.4.3-r1)
(56/67) Installing alsa-lib (1.2.11-r0)
(57/67) Installing libao (1.2.2-r2)
(58/67) Installing gsm (1.0.22-r3)
(59/67) Installing libid3tag (0.16.2-r2)
(60/67) Installing libltdl (2.4.7-r3)
(61/67) Installing libmad (0.15.1b-r9)
(62/67) Installing lame-libs (3.100-r5)
(63/67) Installing opus (1.5.2-r0)
(64/67) Installing opusfile (0.12-r6)
(65/67) Installing libvorbis (1.3.7-r2)
(66/67) Installing libsndfile (1.2.2-r0)
(67/67) Installing sox (14.4.2-r12)
Executing busybox-1.36.1-r29.trigger
Executing glib-2.80.5-r0.trigger
Executing shared-mime-info-2.4-r0.trigger
Executing gdk-pixbuf-2.42.12-r0.trigger
OK: 1317 MiB in 273 packages
+ doas apk add --no-interactive make go curl
(1/2) Installing curl (8.11.0-r2)
(2/2) Installing go (1.22.8-r0)
Executing busybox-1.36.1-r29.trigger
OK: 1500 MiB in 275 packages
+ doas apk add --no-interactive libxcursor-dev libxrandr-dev libxinerama-dev libxi-dev linux-headers mesa-dev alsa-lib-dev
(1/50) Installing alsa-lib-dev (1.2.11-r0)
(2/50) Installing libxfixes (6.0.1-r4)
(3/50) Installing libxcursor (1.2.2-r1)
(4/50) Installing xorgproto (2024.1-r0)
(5/50) Installing libxau-dev (1.0.11-r4)
(6/50) Installing xcb-proto (1.16.0-r1)
(7/50) Installing xcb-proto-pyc (1.16.0-r1)
(8/50) Installing libxdmcp-dev (1.1.5-r1)
(9/50) Installing libxcb-dev (1.16.1-r0)
(10/50) Installing xtrans (1.5.0-r0)
(11/50) Installing libx11-dev (1.8.9-r1)
(12/50) Installing libxfixes-dev (6.0.1-r4)
(13/50) Installing libxrender-dev (0.9.11-r5)
(14/50) Installing libxcursor-dev (1.2.2-r1)
(15/50) Installing libxi (1.8.1-r4)
(16/50) Installing libxext-dev (1.3.6-r2)
(17/50) Installing libxi-dev (1.8.1-r4)
(18/50) Installing libxinerama (1.1.5-r4)
(19/50) Installing libxinerama-dev (1.1.5-r4)
(20/50) Installing libxrandr (1.5.4-r1)
(21/50) Installing libxrandr-dev (1.5.4-r1)
(22/50) Installing hwdata-pci (0.382-r0)
(23/50) Installing libpciaccess (0.18.1-r0)
(24/50) Installing libdrm (2.4.120-r0)
(25/50) Installing libpciaccess-dev (0.18.1-r0)
(26/50) Installing libdrm-dev (2.4.120-r0)
(27/50) Installing libxdamage (1.1.6-r5)
(28/50) Installing libxdamage-dev (1.1.6-r5)
(29/50) Installing libxshmfence (1.3.2-r6)
(30/50) Installing libxshmfence-dev (1.3.2-r6)
(31/50) Installing mesa (24.0.9-r1)
(32/50) Installing wayland-libs-server (1.22.0-r4)
(33/50) Installing mesa-gbm (24.0.9-r1)
(34/50) Installing mesa-glapi (24.0.9-r1)
(35/50) Installing wayland-libs-client (1.22.0-r4)
(36/50) Installing mesa-egl (24.0.9-r1)
(37/50) Installing libxxf86vm (1.1.5-r6)
(38/50) Installing mesa-gl (24.0.9-r1)
(39/50) Installing mesa-gles (24.0.9-r1)
(40/50) Installing llvm17-libs (17.0.6-r1)
(41/50) Installing mesa-osmesa (24.0.9-r1)
(42/50) Installing clang17-headers (17.0.6-r1)
(43/50) Installing libclc (17.0.6-r0)
(44/50) Installing spirv-llvm-translator-libs (17.0.0-r0)
(45/50) Installing spirv-tools (1.3.261.1-r0)
(46/50) Installing clang17-libs (17.0.6-r1)
(47/50) Installing mesa-rusticl (24.0.9-r1)
(48/50) Installing mesa-xatracker (24.0.9-r1)
(49/50) Installing libxxf86vm-dev (1.1.5-r6)
(50/50) Installing mesa-dev (24.0.9-r1)
Executing busybox-1.36.1-r29.trigger
OK: 1882 MiB in 325 packages
+ cmake -B build
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Git: /usr/bin/git (found version "2.45.2")
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Checking for modules 'libssl;libcrypto'
-- Found libssl, version 3.3.2
-- Found libcrypto, version 3.3.2
-- Performing Test ICONV_ACCEPTS_TRANSLIT
-- Performing Test ICONV_ACCEPTS_TRANSLIT - Failed
-- Checking for module 'libffi'
-- Found libffi, version 3.4.6
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Found Curses: /usr/lib/libcurses.so
-- Checking for module 'ncursesw'
-- Found ncursesw, version 6.4.20240420
-- Checking for module 'readline'
-- Found readline, version 8.2
-- Configuring done (2.0s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build
+ cmake --build build -- package
[ 7%] [32mBuilding C object CMakeFiles/xB.dir/xB.c.o[0m
[ 15%] [32m[1mLinking C executable xB[0m
[ 15%] Built target xB
[ 23%] [34m[1mGenerating xC relay protocol code[0m
[ 23%] Built target xC-proto
[ 30%] [34m[1mGenerating files from the list of server numerics[0m
[ 30%] Built target replies
[ 38%] [32mBuilding C object CMakeFiles/xC.dir/xC.c.o[0m
[ 46%] [32m[1mLinking C executable xC[0m
[ 46%] Built target xC
[ 53%] [32mBuilding C object CMakeFiles/xD.dir/xD.c.o[0m
[ 61%] [32m[1mLinking C executable xD[0m
[ 61%] Built target xD
[ 69%] [32mBuilding C object CMakeFiles/test-xC.dir/xC.c.o[0m
[ 76%] [32m[1mLinking C executable test-xC[0m
[ 76%] Built target test-xC
[ 84%] [34m[1mGenerating man page for xB[0m
[ 92%] [34m[1mGenerating man page for xC[0m
[100%] [34m[1mGenerating man page for xD[0m
[100%] Built target docs
[36mRun CPack packaging tool...[0m
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-2.0.0+10+gfce8fd4-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-2.0.0+10+gfce8fd4-Linux-x86_64.zip generated.
+ cmake build '-DWANT_READLINE=OFF' '-DWANT_LIBEDIT=ON'
-- Checking for module 'libedit'
-- Found libedit, version 3.1
-- Configuring done (0.3s)
-- Generating done (0.1s)
-- Build files have been written to: /home/ci/xK/build
+ cmake --build build -- package
[ 7%] [32mBuilding C object CMakeFiles/xB.dir/xB.c.o[0m
[ 15%] [32m[1mLinking C executable xB[0m
[ 15%] Built target xB
[ 23%] Built target replies
[ 30%] Built target xC-proto
[ 38%] [32mBuilding C object CMakeFiles/xC.dir/xC.c.o[0m
[ 46%] [32m[1mLinking C executable xC[0m
[ 46%] Built target xC
[ 53%] [32mBuilding C object CMakeFiles/xD.dir/xD.c.o[0m
[ 61%] [32m[1mLinking C executable xD[0m
[ 61%] Built target xD
[ 69%] [32mBuilding C object CMakeFiles/test-xC.dir/xC.c.o[0m
[ 76%] [32m[1mLinking C executable test-xC[0m
[ 76%] Built target test-xC
[100%] Built target docs
[36mRun CPack packaging tool...[0m
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-2.0.0+10+gfce8fd4-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-2.0.0+10+gfce8fd4-Linux-x86_64.zip generated.
+ cmake --build build -- test
[36mRunning tests...[0m
Test project /home/ci/xK/build
Start 1: test-xC
1/2 Test #1: test-xC .......................... Passed 0.01 sec
Start 2: custom-static-analysis
2/2 Test #2: custom-static-analysis ........... Passed 0.01 sec
100% tests passed, 0 tests failed out of 2
Total Test time (real) = 0.02 sec
+ toolchain=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x86.cmake
+ cmake -B build-xW-x86 -S xW '-DCMAKE_TOOLCHAIN_FILE=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x86.cmake'
-- The CXX compiler identification is GNU 13.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/i686-w64-mingw32-g++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Configuring done (0.6s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build-xW-x86
+ cmake --build build-xW-x86 -- package
[ 6%] [34m[1mGenerating xC relay protocol code[0m
[ 6%] Built target xC-proto
[ 12%] [34m[1mGenerating xW 256x256 application icon[0m
[ 18%] [34m[1mGenerating xW 16x16 application icon[0m
[ 25%] [34m[1mGenerating xW 32x32 application icon[0m
[ 31%] [34m[1mGenerating xW 48x48 application icon[0m
[ 37%] [34m[1mGenerating Windows program icon[0m
[ 43%] [34m[1mGenerating a beep sample[0m
[ 50%] [34m[1mGenerating xW-highlighted 16x16 application icon[0m
[ 56%] [34m[1mGenerating xW-highlighted 256x256 application icon[0m
[ 62%] [34m[1mGenerating xW-highlighted 32x32 application icon[0m
[ 68%] [34m[1mGenerating xW-highlighted 48x48 application icon[0m
[ 75%] [34m[1mGenerating Windows program icon[0m
[ 81%] [32mBuilding CXX object CMakeFiles/xW.dir/xW.cpp.obj[0m
[ 87%] [32mBuilding RC object CMakeFiles/xW.dir/xW.rc.res[0m
[ 93%] [32mBuilding CXX object CMakeFiles/xW.dir/home/ci/xK/liberty/tools/lxdrgen-cpp-win32.cpp.obj[0m
[100%] [32m[1mLinking CXX executable xW.exe[0m
[100%] Built target xW
[36mRun CPack packaging tool...[0m
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xW
CPack: - Install project: xW []
CPack: Create package
CPack: - package: /home/ci/xK/build-xW-x86/xW-2.0.0-win32.zip generated.
+ toolchain=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x64.cmake
+ cmake -B build-xW-x64 -S xW '-DCMAKE_TOOLCHAIN_FILE=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x64.cmake'
-- The CXX compiler identification is GNU 13.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/x86_64-w64-mingw32-g++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Configuring done (0.5s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build-xW-x64
+ cmake --build build-xW-x64 -- package
[ 6%] [34m[1mGenerating xC relay protocol code[0m
[ 6%] Built target xC-proto
[ 12%] [34m[1mGenerating xW 256x256 application icon[0m
[ 18%] [34m[1mGenerating xW 16x16 application icon[0m
[ 25%] [34m[1mGenerating xW 32x32 application icon[0m
[ 31%] [34m[1mGenerating xW 48x48 application icon[0m
[ 37%] [34m[1mGenerating Windows program icon[0m
[ 43%] [34m[1mGenerating a beep sample[0m
[ 50%] [34m[1mGenerating xW-highlighted 16x16 application icon[0m
[ 56%] [34m[1mGenerating xW-highlighted 256x256 application icon[0m
[ 62%] [34m[1mGenerating xW-highlighted 32x32 application icon[0m
[ 68%] [34m[1mGenerating xW-highlighted 48x48 application icon[0m
[ 75%] [34m[1mGenerating Windows program icon[0m
[ 81%] [32mBuilding CXX object CMakeFiles/xW.dir/xW.cpp.obj[0m
[ 87%] [32mBuilding RC object CMakeFiles/xW.dir/xW.rc.res[0m
[ 93%] [32mBuilding CXX object CMakeFiles/xW.dir/home/ci/xK/liberty/tools/lxdrgen-cpp-win32.cpp.obj[0m
[100%] [32m[1mLinking CXX executable xW.exe[0m
[100%] Built target xW
[36mRun CPack packaging tool...[0m
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xW
CPack: - Install project: xW []
CPack: Create package
CPack: - package: /home/ci/xK/build-xW-x64/xW-2.0.0-win64.zip generated.
+ make -C xN all test
make: Entering directory '/home/ci/xK/xN'
ln -sf ../xS/irc.go irc.go
go build -ldflags "-X 'main.projectVersion=$(cat ../xK-version)'" -o xN
env "asciidoc-release-version=$(cat ../xK-version)" \
env LC_ALL=C awk -f ../liberty/tools/asciiman.awk xN.adoc > xN.1
go test
PASS
ok janouch.name/xK/xN 0.006s
make: Leaving directory '/home/ci/xK/xN'
+ make -C xS all test
make: Entering directory '/home/ci/xK/xS'
env LC_ALL=C awk -f xS-gen-replies.awk xS-replies > xS-replies.go
go build -ldflags "-X 'main.projectVersion=$(cat ../xK-version)'" -o xS
env "asciidoc-release-version=$(cat ../xK-version)" \
env LC_ALL=C awk -f ../liberty/tools/asciiman.awk xS.adoc > xS.1
go test
PASS
ok janouch.name/xK/xS 0.008s
make: Leaving directory '/home/ci/xK/xS'
+ make -C xP
make: Entering directory '/home/ci/xK/xP'
env LC_ALL=C awk -f ../liberty/tools/lxdrgen.awk -f ../liberty/tools/lxdrgen-go.awk \
-v PrefixCamel=Relay ../xC.lxdr > proto.go
go build -o xP
go: downloading nhooyr.io/websocket v1.8.17
env LC_ALL=C awk -f ../liberty/tools/lxdrgen.awk -f ../liberty/tools/lxdrgen-mjs.awk ../xC.lxdr > public/proto.js
curl -Lo public/mithril.js https://unpkg.com/mithril/mithril.js
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 48 0 48 0 0 193 0 --:--:-- --:--:-- --:--:-- 193
100 68397 0 68397 0 0 222k 0 --:--:-- --:--:-- --:--:-- 222k
make: Leaving directory '/home/ci/xK/xP'
+ make -C xA
make: Entering directory '/home/ci/xK/xA'
printf "\
[Details]\n\
Icon = 'xA.png'\n\
Name = 'xA'\n\
ID = 'name.janouch.xA'\n\
Version = '$(cat ../xK-version)'\n\
Build = 1\n\
\n\
[LinuxAndBSD]\n\
GenericName = 'IRC Client'\n\
Categories = ['Network', 'Chat', 'IRCClient']\n" > FyneApp.toml
env LC_ALL=C awk -f ../liberty/tools/lxdrgen.awk -f ../liberty/tools/lxdrgen-go.awk \
-v PrefixCamel=Relay ../xC.lxdr > proto.go
rsvg-convert --output=xA.png -- xA.svg
rsvg-convert --output=xA-highlighted.png -- xA-highlighted.svg
sox -Dr 44100 -c 1 -e signed-integer -b 16 -L -n beep.raw \
synth 0.1 0 25 triangle 800 vol 0.5 fade t 0 -0 0.005 pad 0 0.05
go build -ldflags "-X 'main.projectVersion=$(cat ../xK-version)'" -o xA \
-gcflags=all="-N -l"
go: go.mod requires go >= 1.23 (running go 1.22.8; GOTOOLCHAIN=local)
make: *** [Makefile:31: xA] Error 1
make: Leaving directory '/home/ci/xK/xA'
Process exited with status 2