Tasks » 184

Project
p/xK
Commit
214c3498692cc7d81e233fcf6c27dccf448ab591
Runner
Alpine 3.20
State
Success
Notified
1

Runner log

+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/      /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7lSeaBIOS (version Arch Linux 1.16.3-1-1)


iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
                                                                               


Booting from Hard Disk...

SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
e%@)0(B[?25lAlpine will be booted automatically in 1 secondsAlpine will be booted automatically in 1 seconds..                                                                                                   [?25h 
Loading vmlinuz-virt...Loading vmlinuz-virt...  ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk

c[?7l[    0.000000] Linux version 6.6.34-1-virt (buildozer@build-3-20-x86_64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #2-Alpine SMP PREEMPT_DYNAMIC Tue, 18 Jun 2024 10:38:37 +0000
[    0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 1739124965 cycles
[    0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000008] tsc: Detected 1696.074 MHz processor
[    0.001164] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[    0.001210] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.001215] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001448] RAMDISK: [mem 0x7f6be000-0x7ffd9fff]
[    0.001452] ACPI: Early table checksum verification disabled
[    0.001456] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[    0.001464] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001473] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001483] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001489] ACPI: FACS 0x000000007FFE0000 000040
[    0.001495] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001500] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001506] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.001511] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[    0.001513] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[    0.001515] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[    0.001516] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[    0.001517] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[    0.001518] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[    0.002000] Zone ranges:
[    0.002002]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002005]   DMA32    [mem 0x0000000001000000-0x000000007ffd9fff]
[    0.002007]   Normal   empty
[    0.002009] Movable zone start for each node
[    0.002010] Early memory node ranges
[    0.002011]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002013]   node   0: [mem 0x0000000000100000-0x000000007ffd9fff]
[    0.002015] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[    0.002400] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.002429] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.012364] On node 0, zone DMA32: 38 pages in unavailable ranges
[    0.013086] ACPI: PM-Timer IO Port: 0x608
[    0.013105] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.013168] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.013173] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.013177] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.013179] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.013180] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.013182] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.013189] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.013192] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.013198] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.013223] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.013246] [mem 0x80000000-0xfeffbfff] available for PCI devices
[    0.013248] Booting paravirtualized kernel on KVM
[    0.013250] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.020746] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.021359] percpu: Embedded 57 pages/cpu s195560 r8192 d29720 u1048576
[    0.021406] kvm-guest: PV spinlocks disabled, no host support
[    0.021407] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[    0.021486] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[    0.022062] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.022564] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.022663] Built 1 zonelists, mobility grouping on.  Total pages: 515802
[    0.023299] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.029983] Memory: 2012824K/2096608K available (14336K kernel code, 1799K rwdata, 8232K rodata, 2696K init, 2032K bss, 83524K reserved, 0K cma-reserved)
[    0.040879] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.041028] Kernel/User page tables isolation: enabled
[    0.042278] Dynamic Preempt: none
[    0.042421] rcu: Preemptible hierarchical RCU implementation.
[    0.042422] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.042424] 	Trampoline variant of Tasks RCU enabled.
[    0.042425] 	Tracing variant of Tasks RCU enabled.
[    0.042426] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.042427] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.047464] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[    0.047707] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.047904] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.056511] Console: colour VGA+ 80x25
[    0.056576] printk: console [ttyS0] enabled
[    0.239485] ACPI: Core revision 20230628
[    0.241456] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.244830] APIC: Switch to symmetric I/O mode setup
[    0.247015] x2apic enabled
[    0.248516] APIC: Switched APIC routing to: physical x2apic
[    0.252426] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.254554] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[    0.257516] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960740)
[    0.259652] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.260928] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.262348] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.264409] Spectre V2 : Mitigation: Retpolines
[    0.267516] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.270362] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.272100] Speculative Store Bypass: Vulnerable
[    0.273208] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.274771] MMIO Stale Data: Unknown: No mitigations
[    0.275959] x86/fpu: x87 FPU will use FXSAVE
[    0.300541] Freeing SMP alternatives memory: 32K
[    0.301698] pid_max: default: 32768 minimum: 301
[    0.303780] LSM: initializing lsm=lockdown,capability,landlock,integrity
[    0.306979] landlock: Up and running.
[    0.307789] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.309832] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.433951] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[    0.437512] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.437512] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.437512] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[    0.437567] signal: max sigframe size: 1440
[    0.438719] rcu: Hierarchical SRCU implementation.
[    0.439983] rcu: 	Max phase no-delay instances is 1000.
[    0.441829] NMI watchdog: Perf NMI watchdog permanently disabled
[    0.443555] smp: Bringing up secondary CPUs ...
[    0.445015] smpboot: x86: Booting SMP configuration:
[    0.447524] .... node  #0, CPUs:      #1
[    0.459514] smp: Brought up 1 node, 2 CPUs
[    0.459548] smpboot: Max logical packages: 1
[    0.460578] ----------------
[    0.461278] | NMI testsuite:
[    0.461991] --------------------
[    0.462776]   remote IPI:  ok  |
[    0.463596]    local IPI:  ok  |
[    0.468310] --------------------
[    0.469135] Good, all   2 testcases passed! |
[    0.470336] ---------------------------------
[    0.471559] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[    0.473620] devtmpfs: initialized
[    0.473620] x86/mm: Memory block size: 128MB
[    0.473620] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.477529] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.481107] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.482739] audit: initializing netlink subsys (disabled)
[    0.484112] audit: type=2000 audit(1731425804.350:1): state=initialized audit_enabled=0 res=1
[    0.484112] thermal_sys: Registered thermal governor 'step_wise'
[    0.487546] cpuidle: using governor ladder
[    0.490072] cpuidle: using governor menu
[    0.491195] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.491195] PCI: Using configuration type 1 for base access
[    0.491617] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.504882] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.504882] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.507839] ACPI: Added _OSI(Module Device)
[    0.508701] ACPI: Added _OSI(Processor Device)
[    0.509819] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.510952] ACPI: Added _OSI(Processor Aggregator Device)
[    0.513077] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.518444] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[    0.520033] ACPI: Interpreter enabled
[    0.520937] ACPI: PM: (supports S0 S3 S5)
[    0.522009] ACPI: Using IOAPIC for interrupt routing
[    0.523252] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.525465] PCI: Using E820 reservations for host bridge windows
[    0.527028] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.530676] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.532758] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[    0.535221] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.537532] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[    0.540764] acpiphp: Slot [3] registered
[    0.541766] acpiphp: Slot [4] registered
[    0.542736] acpiphp: Slot [5] registered
[    0.543705] acpiphp: Slot [6] registered
[    0.544690] acpiphp: Slot [7] registered
[    0.545665] acpiphp: Slot [8] registered
[    0.546638] acpiphp: Slot [9] registered
[    0.547552] acpiphp: Slot [10] registered
[    0.548697] acpiphp: Slot [11] registered
[    0.549837] acpiphp: Slot [12] registered
[    0.550963] acpiphp: Slot [13] registered
[    0.551976] acpiphp: Slot [14] registered
[    0.552972] acpiphp: Slot [15] registered
[    0.553964] acpiphp: Slot [16] registered
[    0.554968] acpiphp: Slot [17] registered
[    0.555958] acpiphp: Slot [18] registered
[    0.557551] acpiphp: Slot [19] registered
[    0.558564] acpiphp: Slot [20] registered
[    0.559570] acpiphp: Slot [21] registered
[    0.560566] acpiphp: Slot [22] registered
[    0.561623] acpiphp: Slot [23] registered
[    0.562647] acpiphp: Slot [24] registered
[    0.563640] acpiphp: Slot [25] registered
[    0.564631] acpiphp: Slot [26] registered
[    0.565657] acpiphp: Slot [27] registered
[    0.566648] acpiphp: Slot [28] registered
[    0.567547] acpiphp: Slot [29] registered
[    0.568729] acpiphp: Slot [30] registered
[    0.569867] acpiphp: Slot [31] registered
[    0.571048] PCI host bridge to bus 0000:00
[    0.572205] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.574060] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.575924] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.577517] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.579564] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[    0.581552] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.582946] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.585120] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.588406] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.593903] pci 0000:00:01.1: reg 0x20: [io  0xc120-0xc12f]
[    0.597296] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.597520] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.599182] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.600924] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.602795] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.605004] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.607532] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.609861] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.618298] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.629898] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[    0.640942] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.642816] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.645546] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[    0.648910] pci 0000:00:03.0: reg 0x10: [io  0xc100-0xc11f]
[    0.652168] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.657520] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[    0.661898] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.666639] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.669435] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.672447] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.679635] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[    0.685561] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[    0.691373] pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0ff]
[    0.694542] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.701293] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[    0.709514] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.711209] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.713046] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.714863] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.716624] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[    0.718138] iommu: Default domain type: Translated
[    0.719484] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.721829] SCSI subsystem initialized
[    0.723194] pps_core: LinuxPPS API ver. 1 registered
[    0.723194] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.723194] PTP clock support registered
[    0.728055] PCI: Using ACPI for IRQ routing
[    0.729242] hpet: 3 channels of 0 reserved for per-cpu timers
[    0.729685] clocksource: Switched to clocksource kvm-clock
[    0.732844] VFS: Disk quotas dquot_6.6.0
[    0.733971] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.733971] pnp: PnP ACPI init
[    0.735300] pnp: PnP ACPI: found 6 devices
[    0.744676] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.747340] NET: Registered PF_INET protocol family
[    0.749205] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.752509] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.754938] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.757083] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.759463] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.762338] TCP: Hash tables configured (established 16384 bind 16384)
[    0.764842] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[    0.766919] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.768532] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.770407] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.772316] NET: Registered PF_XDP protocol family
[    0.773963] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.775503] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.777000] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.778640] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.780315] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[    0.782071] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.783508] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.785164] PCI: CLS 0 bytes, default 64
[    0.786207] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[    0.786327] Unpacking initramfs...
[    0.789332] Initialise system trusted keyrings
[    0.791617] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.793470] zbud: loaded
[    0.794367] Key type asymmetric registered
[    0.795821] Asymmetric key parser 'x509' registered
[    0.797597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.800233] io scheduler mq-deadline registered
[    0.801754] io scheduler kyber registered
[    0.803254] io scheduler bfq registered
[    0.805338] ERST DBG: ERST support is disabled.
[    0.843474] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    0.880515] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[    0.910424] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[    0.916153] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.918134] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.921130] VMware PVSCSI driver - version 1.0.7.0-k
[    0.923768] scsi host0: ata_piix
[    0.925268] scsi host1: ata_piix
[    0.926519] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[    0.928795] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[    0.931322] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.936035] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.937701] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.939502] rtc_cmos 00:05: RTC can wake from S4
[    0.942531] rtc_cmos 00:05: registered as rtc0
[    0.944171] rtc_cmos 00:05: setting system clock to 2024-11-12T15:36:44 UTC (1731425804)
[    0.947068] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.949686] intel_pstate: CPU model not supported
[    0.951549] gre: GRE over IPv4 demultiplexor driver
[    0.964321] Freeing initrd memory: 9328K
[    0.974326] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.976738] NET: Registered PF_INET6 protocol family
[    0.980030] Segment Routing with IPv6
[    0.981093] In-situ OAM (IOAM) with IPv6
[    0.982182] Key type dns_resolver registered
[    0.983315] IPI shorthand broadcast: enabled
[    0.988404] sched_clock: Marking stable (792362790, 189795115)->(992429948, -10272043)
[    0.998358] registered taskstats version 1
[    0.999792] Loading compiled-in X.509 certificates
[    1.008628] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[    1.013415] Key type .fscrypt registered
[    1.014595] Key type fscrypt-provisioning registered
[    1.100448] ata2: found unknown device (class 0)
[    1.102048] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.104800] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.142446] Freeing unused kernel image (initmem) memory: 2696K
[    1.144150] Write protecting the kernel read-only data: 24576k
[    1.146599] Freeing unused kernel image (rodata/data gap) memory: 2008K
[    1.147849] rodata_test: all tests were successful
[    1.148707] Run /init as init process
[    1.164154] Alpine Init 3.10.1-r0
Alpine Init 3.10.1-r0
[    1.166219] Loading boot drivers...
 * Loading boot drivers: [    1.220995] ACPI: bus type USB registered
[    1.222169] usbcore: registered new interface driver usbfs
[    1.223599] usbcore: registered new interface driver hub
[    1.225052] usbcore: registered new device driver usb
[    1.234100] usbcore: registered new interface driver usb-storage
[    1.403455] loop: module loaded
[    1.449980] ACPI: bus type drm_connector registered
[    1.491666] Loading boot drivers: ok.
ok.
[    1.494954] Mounting root...
 * Mounting root: [    1.525917] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[    1.546939] [drm] Found bochs VGA, ID 0xb0c5.
[    1.547829] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[    1.551481] [drm] Found EDID data blob.
[    1.552822] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[    1.570180] Console: switching to colour frame buffer device 160x50
[    1.573417] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    1.721789] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.723209] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.828254] virtio_blk virtio1: 2/0/0 default/read/poll queues
[    1.834150] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[    1.844430] virtio_blk virtio2: 2/0/0 default/read/poll queues
[    1.850657] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[    2.099000] block sr0: the capability attribute has been deprecated.
[    4.955213] EXT4-fs (vda): mounted filesystem 0487f251-c6cb-4a79-b6c6-03b1b5c178de ro with ordered data mode. Quota mode: none.
[    4.957792] Mounting root: ok.
ok.

   OpenRC 0.54 is starting up Linux 6.6.34-1-virt (x86_64)

 * /proc is already mounted
 * Mounting /run ... [ ok ]
 * /run/openrc: creating directory
 * /run/lock: creating directory
 * /run/lock: correcting owner
 * Caching service dependencies ... [ ok ]
 * Remounting devtmpfs on /dev ... [ ok ]
 * Mounting /dev/mqueue ... [ ok ]
 * Mounting security filesystem ... [ ok ]
 * Mounting debug filesystem ... [ ok ]
 * Mounting persistent storage (pstore) filesystem ... [ ok ]
 * Starting busybox mdev ... [ ok ]
 * Scanning hardware for mdev ... [ ok ]
 * Loading hardware drivers ... [ ok ]
 * Loading modules ... [ ok ]
 * Setting system clock using the hardware clock [UTC] ... [ ok ]
 * Checking local filesystems  .../: clean, 5560/50200 files, 163595/200704 blocks
 [ ok ]
 * Remounting root filesystem read/write ... [ ok ]
 * Remounting filesystems ... [ ok ]
 * Activating swap devices ... [ ok ]
 * Mounting local filesystems ... [ ok ]
 * Starting busybox acpid ... [ ok ]
 * Configuring kernel parameters ... [ ok ]
 * Migrating /var/lock to /run/lock ... [ ok ]
 * Creating user login records ... [ ok ]
 * Cleaning /tmp directory ... [ ok ]
 * cloud-init local ...Cloud-init v. 24.1.3 running 'init-local' at Tue, 12 Nov 2024 15:36:54 +0000. Up 10.55 seconds.
 [ ok ]
 * Setting hostname ... [ ok ]
 * Starting busybox syslog ... [ ok ]
 * Starting networking ... *   lo ... [ ok ]
 *   eth0 ... [ ok ]
 * Starting chronyd ... [ ok ]
 * Starting cloud-init-hotplugd ... [ ok ]
 * cloud-init init ...Cloud-init v. 24.1.3 running 'init' at Tue, 12 Nov 2024 15:37:07 +0000. Up 24.43 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device |  Up  |          Address           |      Mask     | Scope  |     Hw-Address    |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: |  eth0  | True |         10.0.2.15          | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: |  eth0  | True | fec0::5054:ff:fe12:3456/64 |       .       |  site  | 52:54:00:12:34:56 |
ci-info: |  eth0  | True | fe80::5054:ff:fe12:3456/64 |       .       |  link  | 52:54:00:12:34:56 |
ci-info: |   lo   | True |         127.0.0.1          |   255.0.0.0   |  host  |         .         |
ci-info: |   lo   | True |          ::1/128           |       .       |  host  |         .         |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway  |    Genmask    | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: |   0   |   0.0.0.0   | 10.0.2.2 |    0.0.0.0    |    eth0   |   UG  |
ci-info: |   1   |   10.0.2.0  | 0.0.0.0  | 255.255.255.0 |    eth0   |   U   |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: |   0   |  fe80::/64  |    ::   |    eth0   |   U   |
ci-info: |   1   |  fec0::/64  |    ::   |    eth0   |   Ue  |
ci-info: |   2   |     ::/0    | fe80::2 |    eth0   |  UGe  |
ci-info: |   4   |    local    |    ::   |    eth0   |   U   |
ci-info: |   5   |    local    |    ::   |    eth0   |   U   |
ci-info: |   6   |  multicast  |    ::   |    eth0   |   U   |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:2Mlu3h+GpIDY8EQxyM1GeXvvZs3ksr0GdHFLIPocxHg root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| . ==o   oo ..   |
|  o.=.. .oE.. o  |
|  .... ....  + . |
|   * ..+.+... .  |
|  . + o.So+.     |
|       o oo..    |
|        +..*o    |
|       o .=o=.   |
|        .oo=+.   |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:9C38eCYUzwTcbNfTmlgShJT1zE1EmovEEERX6ohqqho root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
|         =BO=o.+=|
|          +===o*o|
|        . ..==*oo|
|       . + X..o. |
|        S * * .  |
|       . . +     |
|E     o   o +    |
| .   o     +     |
|.....            |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:EtPm+Eo2zvgq+nSJRlSwTXoGy2dDFYKjomy/KJE8vY0 root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
|  oo=.o.         |
| .oX . .         |
| .*.B o o        |
|o. = . *         |
|=.o   o S        |
|+* o . o         |
|..* * + .        |
|.ooE B o         |
|o+.o+o=          |
+----[SHA256]-----+
 [ ok ]
 * cloud-init config ...Cloud-init v. 24.1.3 running 'modules:config' at Tue, 12 Nov 2024 15:37:09 +0000. Up 26.42 seconds.
 [ ok ]
 * cloud-init final ...Cloud-init v. 24.1.3 running 'modules:final' at Tue, 12 Nov 2024 15:37:11 +0000. Up 27.70 seconds.
2024-11-12 15:37:11,355 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240705-r0)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
OK: 144 MiB in 151 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: |   Keytype   |                                       Fingerprint (sha256)                                      | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 |    -    |   acid  |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:9C38eCYUzwTcbNfTmlgShJT1zE1EmovEEERX6ohqqho root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:EtPm+Eo2zvgq+nSJRlSwTXoGy2dDFYKjomy/KJE8vY0 root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:2Mlu3h+GpIDY8EQxyM1GeXvvZs3ksr0GdHFLIPocxHg root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBFCBO7qw8/gIB/CMqzGNYD51XkKbIWXK1Qxggd1xG3QA6u0jv1lxJJviBfccGw02T2RvnjBnLvXP2xBkMuTPi64= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIDW4FT2zPHWeWIruhtz6Nf8Wzmgt41hiBSVjD98wnRAP root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.1.3 finished at Tue, 12 Nov 2024 15:37:13 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net].  Up 30.08 seconds
 [ ok ]

Welcome to Alpine Linux 3.20
Kernel 6.6.34-1-virt on an x86_64 (/dev/ttyS0)

alpine-ci login: 

Task log

........
status: done
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.4-r0 -> 2.14.4-r1)
Executing busybox-1.36.1-r29.trigger
Continuing the upgrade transaction with new apk-tools:
(1/27) Upgrading alpine-release (3.20.1-r0 -> 3.20.3-r0)
(2/27) Upgrading ca-certificates-bundle (20240226-r0 -> 20240705-r0)
(3/27) Upgrading libcrypto3 (3.3.1-r0 -> 3.3.2-r1)
(4/27) Upgrading libssl3 (3.3.1-r0 -> 3.3.2-r1)
(5/27) Upgrading alpine-base (3.20.1-r0 -> 3.20.3-r0)
(6/27) Upgrading ncurses-terminfo-base (6.4_p20240420-r0 -> 6.4_p20240420-r1)
(7/27) Upgrading libncursesw (6.4_p20240420-r0 -> 6.4_p20240420-r1)
(8/27) Upgrading libexpat (2.6.2-r0 -> 2.6.4-r0)
(9/27) Upgrading xz-libs (5.6.1-r3 -> 5.6.2-r0)
(10/27) Upgrading libpanelw (6.4_p20240420-r0 -> 6.4_p20240420-r1)
(11/27) Upgrading python3 (3.12.3-r1 -> 3.12.7-r0)
(12/27) Upgrading python3-pycache-pyc0 (3.12.3-r1 -> 3.12.7-r0)
(13/27) Upgrading pyc (3.12.3-r1 -> 3.12.7-r0)
(14/27) Upgrading py3-requests (2.31.0-r2 -> 2.32.3-r0)
(15/27) Upgrading py3-requests-pyc (2.31.0-r2 -> 2.32.3-r0)
(16/27) Upgrading tzdata (2024a-r1 -> 2024b-r0)
(17/27) Upgrading python3-pyc (3.12.3-r1 -> 3.12.7-r0)
(18/27) Upgrading linux-virt (6.6.34-r1 -> 6.6.60-r0)
(19/27) Upgrading openssh-keygen (9.7_p1-r3 -> 9.7_p1-r4)
(20/27) Upgrading openssh-client-common (9.7_p1-r3 -> 9.7_p1-r4)
(21/27) Upgrading openssh-client-default (9.7_p1-r3 -> 9.7_p1-r4)
(22/27) Upgrading openssh-sftp-server (9.7_p1-r3 -> 9.7_p1-r4)
(23/27) Upgrading openssh-server-common (9.7_p1-r3 -> 9.7_p1-r4)
(24/27) Upgrading openssh-server-common-openrc (9.7_p1-r3 -> 9.7_p1-r4)
(25/27) Upgrading openssh-server (9.7_p1-r3 -> 9.7_p1-r4)
(26/27) Upgrading openssh (9.7_p1-r3 -> 9.7_p1-r4)
(27/27) Upgrading openssh-server-pam (9.7_p1-r3 -> 9.7_p1-r4)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
Executing kmod-32-r0.trigger
Executing mkinitfs-3.10.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.60-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 144 MiB in 151 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.33.1-r0)
(3/10) Installing nghttp2-libs (1.62.1-r0)
(4/10) Installing libpsl (0.21.5-r1)
(5/10) Installing libcurl (8.11.0-r2)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.45.2-r0)
(8/10) Installing git-init-template (2.45.2-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r29.trigger
OK: 154 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/xK.git xK
Cloning into 'xK'...
remote: Enumerating objects: 5272, done.        
remote: Counting objects: 100% (1229/1229), done.        
remote: Compressing objects: 100% (1114/1114), done.        
remote: Total 5272 (delta 756), reused 155 (delta 71), pack-reused 4043 (from 1)        
Receiving objects: 100% (5272/5272), 1.98 MiB | 4.32 MiB/s, done.
Resolving deltas: 100% (3467/3467), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Cloning into '/home/ci/xK/liberty'...
remote: Enumerating objects: 772, done.        
remote: Counting objects: 100% (241/241), done.        
remote: Compressing objects: 100% (238/238), done.        
remote: Total 772 (delta 144), reused 0 (delta 0), pack-reused 531 (from 1)        
Receiving objects: 100% (772/772), 389.97 KiB | 4.38 MiB/s, done.
Resolving deltas: 100% (465/465), done.
Submodule path 'liberty': checked out '492815c8fc38ad6e333b2f1c5094a329e3076155'
+ cd xK
+ git -c 'advice.detachedHead=false' checkout 214c3498692cc7d81e233fcf6c27dccf448ab591
HEAD is now at 214c349 xA: limit buffer length
+ doas apk add --no-interactive build-base cmake pkgconf asciidoctor openssl-dev libffi-dev readline-dev libedit-dev lua5.4-dev perl
(1/45) Installing ruby-libs (3.3.6-r0)
(2/45) Installing libucontext (1.2-r3)
(3/45) Installing ruby (3.3.6-r0)
(4/45) Installing asciidoctor (2.0.23-r0)
(5/45) Installing jansson (2.14-r4)
(6/45) Installing binutils (2.42-r0)
(7/45) Installing libmagic (5.45-r1)
(8/45) Installing file (5.45-r1)
(9/45) Installing libgomp (13.2.1_git20240309-r0)
(10/45) Installing libatomic (13.2.1_git20240309-r0)
(11/45) Installing isl26 (0.26-r1)
(12/45) Installing mpfr4 (4.2.1-r0)
(13/45) Installing mpc1 (1.3.1-r1)
(14/45) Installing gcc (13.2.1_git20240309-r0)
(15/45) Installing libstdc++-dev (13.2.1_git20240309-r0)
(16/45) Installing musl-dev (1.2.5-r0)
(17/45) Installing g++ (13.2.1_git20240309-r0)
(18/45) Installing make (4.4.1-r2)
(19/45) Installing fortify-headers (1.1-r3)
(20/45) Installing patch (2.7.6-r10)
(21/45) Installing build-base (0.5-r3)
(22/45) Installing lz4-libs (1.9.4-r5)
(23/45) Installing libarchive (3.7.7-r0)
(24/45) Installing rhash-libs (1.4.4-r0)
(25/45) Installing libuv (1.48.0-r0)
(26/45) Installing cmake (3.29.3-r0)
(27/45) Installing bsd-compat-headers (0.7.2-r6)
(28/45) Installing libformw (6.4_p20240420-r1)
(29/45) Installing libmenuw (6.4_p20240420-r1)
(30/45) Installing libncurses++ (6.4_p20240420-r1)
(31/45) Installing pkgconf (2.2.0-r0)
(32/45) Installing ncurses-dev (6.4_p20240420-r1)
(33/45) Installing libedit-dev (20240517.3.1-r0)
(34/45) Installing linux-headers (6.6-r0)
(35/45) Installing libffi-dev (3.4.6-r0)
(36/45) Installing lua5.4-libs (5.4.6-r1)
(37/45) Installing lua5.4 (5.4.6-r1)
(38/45) Installing lua5.4-dev (5.4.6-r1)
(39/45) Installing openssl-dev (3.3.2-r1)
(40/45) Installing perl (5.38.2-r0)
(41/45) Installing perl-error (0.17029-r2)
(42/45) Installing perl-git (2.45.2-r0)
(43/45) Installing git-perl (2.45.2-r0)
(44/45) Installing libhistory (8.2.10-r0)
(45/45) Installing readline-dev (8.2.10-r0)
Executing busybox-1.36.1-r29.trigger
OK: 500 MiB in 206 packages
+ doas apk add --no-interactive mingw-w64-gcc i686-mingw-w64-gcc cmake make rsvg-convert icoutils sox
(1/67) Installing i686-mingw-w64-binutils (2.42-r0)
(2/67) Installing i686-mingw-w64-crt (11.0.1-r0)
(3/67) Installing i686-mingw-w64-headers (11.0.0-r1)
(4/67) Installing i686-mingw-w64-winpthreads (11.0.0-r2)
(5/67) Installing i686-mingw-w64-gcc (13.2.0-r2)
(6/67) Installing perl-http-date (6.06-r0)
(7/67) Installing perl-clone (0.46-r2)
(8/67) Installing perl-uri (5.28-r0)
(9/67) Installing perl-io-html (1.004-r1)
(10/67) Installing perl-encode-locale (1.05-r5)
(11/67) Installing perl-lwp-mediatypes (6.04-r3)
(12/67) Installing perl-http-message (6.45-r0)
(13/67) Installing perl-http-cookies (6.11-r0)
(14/67) Installing perl-net-http (6.23-r1)
(15/67) Installing perl-html-tagset (3.24-r0)
(16/67) Installing perl-html-parser (3.82-r0)
(17/67) Installing perl-file-listing (6.16-r0)
(18/67) Installing perl-www-robotrules (6.02-r5)
(19/67) Installing perl-http-negotiate (6.01-r5)
(20/67) Installing perl-try-tiny (0.31-r2)
(21/67) Installing perl-libwww (6.77-r0)
(22/67) Installing libpng (1.6.44-r0)
(23/67) Installing icoutils (0.32.3-r3)
(24/67) Installing mingw-w64-binutils (2.42-r0)
(25/67) Installing mingw-w64-crt (11.0.1-r0)
(26/67) Installing mingw-w64-headers (11.0.0-r1)
(27/67) Installing mingw-w64-winpthreads (11.0.0-r2)
(28/67) Installing mingw-w64-gcc (13.2.0-r2)
(29/67) Installing libxau (1.0.11-r4)
(30/67) Installing libxdmcp (1.1.5-r1)
(31/67) Installing libxcb (1.16.1-r0)
(32/67) Installing libx11 (1.8.9-r1)
(33/67) Installing libxext (1.3.6-r2)
(34/67) Installing libxrender (0.9.11-r5)
(35/67) Installing freetype (2.13.2-r0)
(36/67) Installing fontconfig (2.15.0-r1)
(37/67) Installing pixman (0.43.2-r0)
(38/67) Installing cairo (1.18.0-r0)
(39/67) Installing libintl (0.22.5-r0)
(40/67) Installing glib (2.80.5-r0)
(41/67) Installing libxml2 (2.12.7-r0)
(42/67) Installing shared-mime-info (2.4-r0)
(43/67) Installing libjpeg-turbo (3.0.3-r0)
(44/67) Installing libsharpyuv (1.3.2-r0)
(45/67) Installing libwebp (1.3.2-r0)
(46/67) Installing tiff (4.6.0t-r0)
(47/67) Installing gdk-pixbuf (2.42.12-r0)
(48/67) Installing libxft (2.3.8-r3)
(49/67) Installing fribidi (1.0.15-r0)
(50/67) Installing graphite2 (1.3.14-r6)
(51/67) Installing harfbuzz (8.5.0-r0)
(52/67) Installing pango (1.52.2-r0)
(53/67) Installing rsvg-convert (2.58.5-r0)
(54/67) Installing libogg (1.3.5-r5)
(55/67) Installing libflac (1.4.3-r1)
(56/67) Installing alsa-lib (1.2.11-r0)
(57/67) Installing libao (1.2.2-r2)
(58/67) Installing gsm (1.0.22-r3)
(59/67) Installing libid3tag (0.16.2-r2)
(60/67) Installing libltdl (2.4.7-r3)
(61/67) Installing libmad (0.15.1b-r9)
(62/67) Installing lame-libs (3.100-r5)
(63/67) Installing opus (1.5.2-r0)
(64/67) Installing opusfile (0.12-r6)
(65/67) Installing libvorbis (1.3.7-r2)
(66/67) Installing libsndfile (1.2.2-r0)
(67/67) Installing sox (14.4.2-r12)
Executing busybox-1.36.1-r29.trigger
Executing glib-2.80.5-r0.trigger
Executing shared-mime-info-2.4-r0.trigger
Executing gdk-pixbuf-2.42.12-r0.trigger
OK: 1317 MiB in 273 packages
+ doas apk add --no-interactive make go curl
(1/2) Installing curl (8.11.0-r2)
(2/2) Installing go (1.22.8-r0)
Executing busybox-1.36.1-r29.trigger
OK: 1500 MiB in 275 packages
+ doas apk add --no-interactive libxcursor-dev libxrandr-dev libxinerama-dev libxi-dev linux-headers mesa-dev alsa-lib-dev
(1/50) Installing alsa-lib-dev (1.2.11-r0)
(2/50) Installing libxfixes (6.0.1-r4)
(3/50) Installing libxcursor (1.2.2-r1)
(4/50) Installing xorgproto (2024.1-r0)
(5/50) Installing libxau-dev (1.0.11-r4)
(6/50) Installing xcb-proto (1.16.0-r1)
(7/50) Installing xcb-proto-pyc (1.16.0-r1)
(8/50) Installing libxdmcp-dev (1.1.5-r1)
(9/50) Installing libxcb-dev (1.16.1-r0)
(10/50) Installing xtrans (1.5.0-r0)
(11/50) Installing libx11-dev (1.8.9-r1)
(12/50) Installing libxfixes-dev (6.0.1-r4)
(13/50) Installing libxrender-dev (0.9.11-r5)
(14/50) Installing libxcursor-dev (1.2.2-r1)
(15/50) Installing libxi (1.8.1-r4)
(16/50) Installing libxext-dev (1.3.6-r2)
(17/50) Installing libxi-dev (1.8.1-r4)
(18/50) Installing libxinerama (1.1.5-r4)
(19/50) Installing libxinerama-dev (1.1.5-r4)
(20/50) Installing libxrandr (1.5.4-r1)
(21/50) Installing libxrandr-dev (1.5.4-r1)
(22/50) Installing hwdata-pci (0.382-r0)
(23/50) Installing libpciaccess (0.18.1-r0)
(24/50) Installing libdrm (2.4.120-r0)
(25/50) Installing libpciaccess-dev (0.18.1-r0)
(26/50) Installing libdrm-dev (2.4.120-r0)
(27/50) Installing libxdamage (1.1.6-r5)
(28/50) Installing libxdamage-dev (1.1.6-r5)
(29/50) Installing libxshmfence (1.3.2-r6)
(30/50) Installing libxshmfence-dev (1.3.2-r6)
(31/50) Installing mesa (24.0.9-r1)
(32/50) Installing wayland-libs-server (1.22.0-r4)
(33/50) Installing mesa-gbm (24.0.9-r1)
(34/50) Installing mesa-glapi (24.0.9-r1)
(35/50) Installing wayland-libs-client (1.22.0-r4)
(36/50) Installing mesa-egl (24.0.9-r1)
(37/50) Installing libxxf86vm (1.1.5-r6)
(38/50) Installing mesa-gl (24.0.9-r1)
(39/50) Installing mesa-gles (24.0.9-r1)
(40/50) Installing llvm17-libs (17.0.6-r1)
(41/50) Installing mesa-osmesa (24.0.9-r1)
(42/50) Installing clang17-headers (17.0.6-r1)
(43/50) Installing libclc (17.0.6-r0)
(44/50) Installing spirv-llvm-translator-libs (17.0.0-r0)
(45/50) Installing spirv-tools (1.3.261.1-r0)
(46/50) Installing clang17-libs (17.0.6-r1)
(47/50) Installing mesa-rusticl (24.0.9-r1)
(48/50) Installing mesa-xatracker (24.0.9-r1)
(49/50) Installing libxxf86vm-dev (1.1.5-r6)
(50/50) Installing mesa-dev (24.0.9-r1)
Executing busybox-1.36.1-r29.trigger
OK: 1882 MiB in 325 packages
+ cmake -B build
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Git: /usr/bin/git (found version "2.45.2")
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Checking for modules 'libssl;libcrypto'
--   Found libssl, version 3.3.2
--   Found libcrypto, version 3.3.2
-- Performing Test ICONV_ACCEPTS_TRANSLIT
-- Performing Test ICONV_ACCEPTS_TRANSLIT - Failed
-- Checking for module 'libffi'
--   Found libffi, version 3.4.6
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Found Curses: /usr/lib/libcurses.so
-- Checking for module 'ncursesw'
--   Found ncursesw, version 6.4.20240420
-- Checking for module 'readline'
--   Found readline, version 8.2
-- Configuring done (2.0s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build
+ cmake --build build -- package
[  7%] Building C object CMakeFiles/xB.dir/xB.c.o
[ 15%] Linking C executable xB
[ 15%] Built target xB
[ 23%] Generating xC relay protocol code
[ 23%] Built target xC-proto
[ 30%] Generating files from the list of server numerics
[ 30%] Built target replies
[ 38%] Building C object CMakeFiles/xC.dir/xC.c.o
[ 46%] Linking C executable xC
[ 46%] Built target xC
[ 53%] Building C object CMakeFiles/xD.dir/xD.c.o
[ 61%] Linking C executable xD
[ 61%] Built target xD
[ 69%] Building C object CMakeFiles/test-xC.dir/xC.c.o
[ 76%] Linking C executable test-xC
[ 76%] Built target test-xC
[ 84%] Generating man page for xB
[ 92%] Generating man page for xC
[100%] Generating man page for xD
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-2.0.0+12+g214c349-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-2.0.0+12+g214c349-Linux-x86_64.zip generated.
+ cmake build '-DWANT_READLINE=OFF' '-DWANT_LIBEDIT=ON'
-- Checking for module 'libedit'
--   Found libedit, version 3.1
-- Configuring done (0.3s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build
+ cmake --build build -- package
[  7%] Building C object CMakeFiles/xB.dir/xB.c.o
[ 15%] Linking C executable xB
[ 15%] Built target xB
[ 23%] Built target replies
[ 30%] Built target xC-proto
[ 38%] Building C object CMakeFiles/xC.dir/xC.c.o
[ 46%] Linking C executable xC
[ 46%] Built target xC
[ 53%] Building C object CMakeFiles/xD.dir/xD.c.o
[ 61%] Linking C executable xD
[ 61%] Built target xD
[ 69%] Building C object CMakeFiles/test-xC.dir/xC.c.o
[ 76%] Linking C executable test-xC
[ 76%] Built target test-xC
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-2.0.0+12+g214c349-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-2.0.0+12+g214c349-Linux-x86_64.zip generated.
+ cmake --build build -- test
Running tests...
Test project /home/ci/xK/build
    Start 1: test-xC
1/2 Test #1: test-xC ..........................   Passed    0.01 sec
    Start 2: custom-static-analysis
2/2 Test #2: custom-static-analysis ...........   Passed    0.02 sec

100% tests passed, 0 tests failed out of 2

Total Test time (real) =   0.03 sec
+ toolchain=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x86.cmake
+ cmake -B build-xW-x86 -S xW '-DCMAKE_TOOLCHAIN_FILE=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x86.cmake'
-- The CXX compiler identification is GNU 13.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/i686-w64-mingw32-g++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Configuring done (0.6s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build-xW-x86
+ cmake --build build-xW-x86 -- package
[  6%] Generating xC relay protocol code
[  6%] Built target xC-proto
[ 12%] Generating xW 256x256 application icon
[ 18%] Generating xW 16x16 application icon
[ 25%] Generating xW 32x32 application icon
[ 31%] Generating xW 48x48 application icon
[ 37%] Generating Windows program icon
[ 43%] Generating a beep sample
[ 50%] Generating xW-highlighted 16x16 application icon
[ 56%] Generating xW-highlighted 256x256 application icon
[ 62%] Generating xW-highlighted 32x32 application icon
[ 68%] Generating xW-highlighted 48x48 application icon
[ 75%] Generating Windows program icon
[ 81%] Building CXX object CMakeFiles/xW.dir/xW.cpp.obj
[ 87%] Building RC object CMakeFiles/xW.dir/xW.rc.res
[ 93%] Building CXX object CMakeFiles/xW.dir/home/ci/xK/liberty/tools/lxdrgen-cpp-win32.cpp.obj
[100%] Linking CXX executable xW.exe
[100%] Built target xW
Run CPack packaging tool...
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xW
CPack: - Install project: xW []
CPack: Create package
CPack: - package: /home/ci/xK/build-xW-x86/xW-2.0.0-win32.zip generated.
+ toolchain=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x64.cmake
+ cmake -B build-xW-x64 -S xW '-DCMAKE_TOOLCHAIN_FILE=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x64.cmake'
-- The CXX compiler identification is GNU 13.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/x86_64-w64-mingw32-g++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Configuring done (0.5s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build-xW-x64
+ cmake --build build-xW-x64 -- package
[  6%] Generating xC relay protocol code
[  6%] Built target xC-proto
[ 12%] Generating xW 256x256 application icon
[ 18%] Generating xW 16x16 application icon
[ 25%] Generating xW 32x32 application icon
[ 31%] Generating xW 48x48 application icon
[ 37%] Generating Windows program icon
[ 43%] Generating a beep sample
[ 50%] Generating xW-highlighted 16x16 application icon
[ 56%] Generating xW-highlighted 256x256 application icon
[ 62%] Generating xW-highlighted 32x32 application icon
[ 68%] Generating xW-highlighted 48x48 application icon
[ 75%] Generating Windows program icon
[ 81%] Building CXX object CMakeFiles/xW.dir/xW.cpp.obj
[ 87%] Building RC object CMakeFiles/xW.dir/xW.rc.res
[ 93%] Building CXX object CMakeFiles/xW.dir/home/ci/xK/liberty/tools/lxdrgen-cpp-win32.cpp.obj
[100%] Linking CXX executable xW.exe
[100%] Built target xW
Run CPack packaging tool...
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xW
CPack: - Install project: xW []
CPack: Create package
CPack: - package: /home/ci/xK/build-xW-x64/xW-2.0.0-win64.zip generated.
+ make -C xN all test
make: Entering directory '/home/ci/xK/xN'
ln -sf ../xS/irc.go irc.go
go build -ldflags "-X 'main.projectVersion=$(cat ../xK-version)'" -o xN
env "asciidoc-release-version=$(cat ../xK-version)" \
	env LC_ALL=C awk -f ../liberty/tools/asciiman.awk xN.adoc > xN.1
go test
PASS
ok  	janouch.name/xK/xN	0.004s
make: Leaving directory '/home/ci/xK/xN'
+ make -C xS all test
make: Entering directory '/home/ci/xK/xS'
env LC_ALL=C awk -f xS-gen-replies.awk xS-replies > xS-replies.go
go build -ldflags "-X 'main.projectVersion=$(cat ../xK-version)'" -o xS
env "asciidoc-release-version=$(cat ../xK-version)" \
	env LC_ALL=C awk -f ../liberty/tools/asciiman.awk xS.adoc > xS.1
go test
PASS
ok  	janouch.name/xK/xS	0.006s
make: Leaving directory '/home/ci/xK/xS'
+ make -C xP
make: Entering directory '/home/ci/xK/xP'
env LC_ALL=C awk -f ../liberty/tools/lxdrgen.awk -f ../liberty/tools/lxdrgen-go.awk \
	-v PrefixCamel=Relay ../xC.lxdr > proto.go
go build -o xP
go: downloading nhooyr.io/websocket v1.8.17
env LC_ALL=C awk -f ../liberty/tools/lxdrgen.awk -f ../liberty/tools/lxdrgen-mjs.awk ../xC.lxdr > public/proto.js
curl -Lo public/mithril.js https://unpkg.com/mithril/mithril.js
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100    48    0    48    0     0    566      0 --:--:-- --:--:-- --:--:--   571
100 68397    0 68397    0     0   728k      0 --:--:-- --:--:-- --:--:--  728k
make: Leaving directory '/home/ci/xK/xP'
+ make -C xA
make: Entering directory '/home/ci/xK/xA'
printf "\
[Details]\n\
Icon = 'xA.png'\n\
Name = 'xA'\n\
ID = 'name.janouch.xA'\n\
Version = '$(cat ../xK-version)'\n\
Build = 1\n\
\n\
[LinuxAndBSD]\n\
GenericName = 'IRC Client'\n\
Categories = ['Network', 'Chat', 'IRCClient']\n" > FyneApp.toml
env LC_ALL=C awk -f ../liberty/tools/lxdrgen.awk -f ../liberty/tools/lxdrgen-go.awk \
	-v PrefixCamel=Relay ../xC.lxdr > proto.go
rsvg-convert --output=xA.png -- xA.svg
rsvg-convert --output=xA-highlighted.png -- xA-highlighted.svg
sox -Dr 44100 -c 1 -e signed-integer -b 16 -L -n beep.raw \
	synth 0.1 0 25 triangle 800 vol 0.5 fade t 0 -0 0.005 pad 0 0.05
go build -ldflags "-X 'main.projectVersion=$(cat ../xK-version)'" -o xA \
	-gcflags=all="-N -l"
go: downloading fyne.io/fyne/v2 v2.5.2
go: downloading github.com/ebitengine/oto/v3 v3.3.1
go: downloading github.com/fsnotify/fsnotify v1.8.0
go: downloading github.com/godbus/dbus/v5 v5.1.0
go: downloading github.com/rymdport/portal v0.3.0
go: downloading github.com/go-text/typesetting v0.2.0
go: downloading github.com/yuin/goldmark v1.7.8
go: downloading golang.org/x/image v0.22.0
go: downloading fyne.io/systray v1.11.0
go: downloading github.com/fyne-io/image v0.0.0-20240417123036-dc0ee9e7c964
go: downloading github.com/go-gl/glfw/v3.3/glfw v0.0.0-20240506104042-037f3cc74f2a
go: downloading github.com/BurntSushi/toml v1.4.0
go: downloading github.com/fredbi/uri v1.1.0
go: downloading golang.org/x/sys v0.27.0
go: downloading github.com/jeandeaual/go-locale v0.0.0-20240223122105-ce5225dcaa49
go: downloading github.com/nicksnyder/go-i18n/v2 v2.4.1
go: downloading golang.org/x/text v0.20.0
go: downloading github.com/srwiley/oksvg v0.0.0-20221011165216-be6e8873101c
go: downloading github.com/srwiley/rasterx v0.0.0-20220730225603-2ab79fcdd4ef
go: downloading github.com/go-text/render v0.2.0
go: downloading github.com/go-gl/gl v0.0.0-20231021071112-07e5d0ea2e71
go: downloading github.com/jsummers/gobmp v0.0.0-20230614200233-a9de23ed2e25
go: downloading golang.org/x/net v0.31.0
make: Leaving directory '/home/ci/xK/xA'