- Project
- p/usb-drivers
- Commit
- 8717f425f46500b76c3e11366c96fd70fc00ab5b
- Runner
- Alpine 3.20
- State
- Success
- Notified
- 1
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7l[2J[0mSeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
[2Je%@)0(B[0;37;40m[?25l[2J[23;16HAlpine will be booted automatically in [0;1m1[0m seconds[23;16H[0;37;40mAlpine will be booted automatically in [0;1;37;40m1[0;37;40m seconds..[23;16H [23;16H[0;37;40m [?25h[24;1H[0m
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
c[?7l[2J[ 0.000000] Linux version 6.6.34-1-virt (buildozer@build-3-20-x86_64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #2-Alpine SMP PREEMPT_DYNAMIC Tue, 18 Jun 2024 10:38:37 +0000
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1693915776 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000008] tsc: Detected 1696.074 MHz processor
[ 0.001164] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001211] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001215] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001593] RAMDISK: [mem 0x7f6be000-0x7ffd9fff]
[ 0.001597] ACPI: Early table checksum verification disabled
[ 0.001601] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[ 0.001609] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001618] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001627] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001634] ACPI: FACS 0x000000007FFE0000 000040
[ 0.001639] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001645] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001651] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001655] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[ 0.001658] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[ 0.001659] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.001660] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[ 0.001661] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[ 0.001663] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[ 0.002144] Zone ranges:
[ 0.002146] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.002149] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.002152] Normal empty
[ 0.002153] Movable zone start for each node
[ 0.002154] Early memory node ranges
[ 0.002155] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.002158] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.002160] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.002545] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002575] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.012532] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.013261] ACPI: PM-Timer IO Port: 0x608
[ 0.013281] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.013345] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.013351] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013354] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.013356] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013358] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.013359] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.013367] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013369] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013376] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.013401] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.013425] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.013426] Booting paravirtualized kernel on KVM
[ 0.013428] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.020955] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.021572] percpu: Embedded 57 pages/cpu s195560 r8192 d29720 u1048576
[ 0.021619] kvm-guest: PV spinlocks disabled, no host support
[ 0.021620] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.021698] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.022274] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.022754] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.022853] Built 1 zonelists, mobility grouping on. Total pages: 515802
[ 0.023497] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.030069] Memory: 2012824K/2096608K available (14336K kernel code, 1799K rwdata, 8232K rodata, 2696K init, 2032K bss, 83524K reserved, 0K cma-reserved)
[ 0.040941] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.041090] Kernel/User page tables isolation: enabled
[ 0.042309] Dynamic Preempt: none
[ 0.042450] rcu: Preemptible hierarchical RCU implementation.
[ 0.042452] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.042453] Trampoline variant of Tasks RCU enabled.
[ 0.042454] Tracing variant of Tasks RCU enabled.
[ 0.042455] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.042457] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.047503] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.047746] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.047943] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.056549] Console: colour VGA+ 80x25
[ 0.056614] printk: console [ttyS0] enabled
[ 0.209585] ACPI: Core revision 20230628
[ 0.211189] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.213628] APIC: Switch to symmetric I/O mode setup
[ 0.215283] x2apic enabled
[ 0.216581] APIC: Switched APIC routing to: physical x2apic
[ 0.220096] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.221789] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.224751] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960740)
[ 0.227168] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.228616] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.230244] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.232565] Spectre V2 : Mitigation: Retpolines
[ 0.234750] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.237008] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.238846] Speculative Store Bypass: Vulnerable
[ 0.240123] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.241908] MMIO Stale Data: Unknown: No mitigations
[ 0.243261] x86/fpu: x87 FPU will use FXSAVE
[ 0.267077] Freeing SMP alternatives memory: 32K
[ 0.268388] pid_max: default: 32768 minimum: 301
[ 0.270588] LSM: initializing lsm=lockdown,capability,landlock,integrity
[ 0.273991] landlock: Up and running.
[ 0.275034] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.277075] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.400628] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.403552] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.404744] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.404744] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.404744] signal: max sigframe size: 1440
[ 0.404812] rcu: Hierarchical SRCU implementation.
[ 0.406139] rcu: Max phase no-delay instances is 1000.
[ 0.407977] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.409720] smp: Bringing up secondary CPUs ...
[ 0.411248] smpboot: x86: Booting SMP configuration:
[ 0.412969] .... node #0, CPUs: #1
[ 0.426747] smp: Brought up 1 node, 2 CPUs
[ 0.427652] smpboot: Max logical packages: 1
[ 0.429143] ----------------
[ 0.430143] | NMI testsuite:
[ 0.431138] --------------------
[ 0.432253] remote IPI: ok |
[ 0.435887] local IPI: ok |
[ 0.437018] --------------------
[ 0.438145] Good, all 2 testcases passed! |
[ 0.439453] ---------------------------------
[ 0.440496] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.442512] devtmpfs: initialized
[ 0.442512] x86/mm: Memory block size: 128MB
[ 0.445028] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.447223] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.451257] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.453172] audit: initializing netlink subsys (disabled)
[ 0.454830] audit: type=2000 audit(1732802671.275:1): state=initialized audit_enabled=0 res=1
[ 0.454936] thermal_sys: Registered thermal governor 'step_wise'
[ 0.457317] cpuidle: using governor ladder
[ 0.460022] cpuidle: using governor menu
[ 0.461270] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.463548] PCI: Using configuration type 1 for base access
[ 0.464985] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.467714] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.469955] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.474799] ACPI: Added _OSI(Module Device)
[ 0.476208] ACPI: Added _OSI(Processor Device)
[ 0.477678] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.479281] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.482381] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.484834] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.486415] ACPI: Interpreter enabled
[ 0.487353] ACPI: PM: (supports S0 S3 S5)
[ 0.488391] ACPI: Using IOAPIC for interrupt routing
[ 0.489611] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.491820] PCI: Using E820 reservations for host bridge windows
[ 0.493379] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.497912] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.499472] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.501329] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.503647] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.505331] acpiphp: Slot [3] registered
[ 0.506460] acpiphp: Slot [4] registered
[ 0.507518] acpiphp: Slot [5] registered
[ 0.508500] acpiphp: Slot [6] registered
[ 0.509495] acpiphp: Slot [7] registered
[ 0.510476] acpiphp: Slot [8] registered
[ 0.511456] acpiphp: Slot [9] registered
[ 0.512442] acpiphp: Slot [10] registered
[ 0.514779] acpiphp: Slot [11] registered
[ 0.515783] acpiphp: Slot [12] registered
[ 0.516803] acpiphp: Slot [13] registered
[ 0.517815] acpiphp: Slot [14] registered
[ 0.518869] acpiphp: Slot [15] registered
[ 0.519862] acpiphp: Slot [16] registered
[ 0.520875] acpiphp: Slot [17] registered
[ 0.521869] acpiphp: Slot [18] registered
[ 0.522868] acpiphp: Slot [19] registered
[ 0.524775] acpiphp: Slot [20] registered
[ 0.525797] acpiphp: Slot [21] registered
[ 0.526795] acpiphp: Slot [22] registered
[ 0.527811] acpiphp: Slot [23] registered
[ 0.528881] acpiphp: Slot [24] registered
[ 0.529883] acpiphp: Slot [25] registered
[ 0.530892] acpiphp: Slot [26] registered
[ 0.531908] acpiphp: Slot [27] registered
[ 0.532902] acpiphp: Slot [28] registered
[ 0.533895] acpiphp: Slot [29] registered
[ 0.534782] acpiphp: Slot [30] registered
[ 0.535882] acpiphp: Slot [31] registered
[ 0.536881] PCI host bridge to bus 0000:00
[ 0.537890] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.539577] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.541197] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.542990] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.544749] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.546586] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.548025] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.550257] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.552690] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.558254] pci 0000:00:01.1: reg 0x20: [io 0xc120-0xc12f]
[ 0.562333] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.564752] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.567392] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.569551] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.571439] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.573624] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.574766] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.577030] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.585406] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.592946] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 0.601879] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.604950] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.608523] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.611598] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc11f]
[ 0.614765] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 0.621235] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.626762] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.631828] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.635501] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.638960] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 0.648608] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.655080] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.659059] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0ff]
[ 0.662766] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[ 0.668741] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.678857] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.681106] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.683349] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.684916] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.686511] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.688551] iommu: Default domain type: Translated
[ 0.689712] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.691476] SCSI subsystem initialized
[ 0.692448] pps_core: LinuxPPS API ver. 1 registered
[ 0.692448] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.694758] PTP clock support registered
[ 0.696186] PCI: Using ACPI for IRQ routing
[ 0.696989] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.696989] clocksource: Switched to clocksource kvm-clock
[ 0.698030] VFS: Disk quotas dquot_6.6.0
[ 0.698956] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.700801] pnp: PnP ACPI init
[ 0.702068] pnp: PnP ACPI: found 6 devices
[ 0.711157] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.713511] NET: Registered PF_INET protocol family
[ 0.715163] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.718486] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.720658] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.722557] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.724534] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.726393] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.728621] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.731274] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.733583] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.736145] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.738120] NET: Registered PF_XDP protocol family
[ 0.739842] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.741542] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.743243] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.745110] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.746977] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.748986] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.750541] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.752094] PCI: CLS 0 bytes, default 64
[ 0.753106] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.753222] Unpacking initramfs...
[ 0.757034] Initialise system trusted keyrings
[ 0.759198] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.761477] zbud: loaded
[ 0.762561] Key type asymmetric registered
[ 0.763978] Asymmetric key parser 'x509' registered
[ 0.765726] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.768477] io scheduler mq-deadline registered
[ 0.770107] io scheduler kyber registered
[ 0.771565] io scheduler bfq registered
[ 0.777261] ERST DBG: ERST support is disabled.
[ 0.804428] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.832637] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.860658] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.863934] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.866378] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.870354] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.873403] scsi host0: ata_piix
[ 0.874870] scsi host1: ata_piix
[ 0.876116] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 0.878461] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 0.880969] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.884809] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.886534] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.888503] rtc_cmos 00:05: RTC can wake from S4
[ 0.891835] rtc_cmos 00:05: registered as rtc0
[ 0.893506] rtc_cmos 00:05: setting system clock to 2024-11-28T14:04:31 UTC (1732802671)
[ 0.896454] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.896931] Freeing initrd memory: 9328K
[ 0.899159] intel_pstate: CPU model not supported
[ 0.901972] gre: GRE over IPv4 demultiplexor driver
[ 0.918687] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.923255] NET: Registered PF_INET6 protocol family
[ 0.925300] Segment Routing with IPv6
[ 0.926622] In-situ OAM (IOAM) with IPv6
[ 0.928166] Key type dns_resolver registered
[ 0.929391] IPI shorthand broadcast: enabled
[ 0.932758] sched_clock: Marking stable (771156678, 156989090)->(942408043, -14262275)
[ 0.939070] registered taskstats version 1
[ 0.940709] Loading compiled-in X.509 certificates
[ 0.949971] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.954845] Key type .fscrypt registered
[ 0.956236] Key type fscrypt-provisioning registered
[ 1.057587] ata2: found unknown device (class 0)
[ 1.061420] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.067982] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.122372] Freeing unused kernel image (initmem) memory: 2696K
[ 1.125342] Write protecting the kernel read-only data: 24576k
[ 1.129786] Freeing unused kernel image (rodata/data gap) memory: 2008K
[ 1.133057] rodata_test: all tests were successful
[ 1.135313] Run /init as init process
[ 1.168422] Alpine Init 3.10.1-r0
Alpine Init 3.10.1-r0
[ 1.172189] Loading boot drivers...
* Loading boot drivers: [ 1.254980] ACPI: bus type USB registered
[ 1.256072] usbcore: registered new interface driver usbfs
[ 1.257944] usbcore: registered new interface driver hub
[ 1.259556] usbcore: registered new device driver usb
[ 1.268553] usbcore: registered new interface driver usb-storage
[ 1.475443] loop: module loaded
[ 1.525427] ACPI: bus type drm_connector registered
[ 1.566849] Loading boot drivers: ok.
ok.
[ 1.570352] Mounting root...
* Mounting root: [ 1.601550] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.622857] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.624033] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.628128] [drm] Found EDID data blob.
[ 1.629186] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 1.646853] Console: switching to colour frame buffer device 160x50
[ 1.650633] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.799480] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.802640] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.896001] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 1.898492] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.901260] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 1.903854] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.086484] block sr0: the capability attribute has been deprecated.
[ 4.917945] EXT4-fs (vda): mounted filesystem 0487f251-c6cb-4a79-b6c6-03b1b5c178de ro with ordered data mode. Quota mode: none.
[ 4.925185] Mounting root: ok.
ok.
OpenRC 0.54 is starting up Linux 6.6.34-1-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5560/50200 files, 163595/200704 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 24.1.3 running 'init-local' at Thu, 28 Nov 2024 14:04:41 +0000. Up 10.64 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ... [ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 24.1.3 running 'init' at Thu, 28 Nov 2024 14:04:52 +0000. Up 22.53 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::5054:ff:fe12:3456/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:qEmRKVMUD0CT3pG6tnTrup22XuUZi4kXPhcpsTBd3eI root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| .++=o .. . |
| .oo* . o . |
| .oo*.+ . . |
| oo.+ + .E |
| .. = S |
| +..= B = |
| o o+.B = |
| ..o+ o |
| o**. |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:ul6lgLDXTG40qDRu65/qqhT2Pv8xnOzo8GNpP5d6zGk root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| |
| . |
| + . + |
| o = B . |
| o= o * S . |
|..oo .oo.o |
| ..o o*= o |
|....o*o+oE |
|+o++O**=* |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:Q2SBDAV+6il6fH2D76Ulgh9re2KrQJQkn/H0WdQD4aU root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
|. o +=.oO=. |
| + B .o* oo |
| = o + E . |
| . o . |
| . . S |
| . . o . |
| .o +.o.. o |
| .oo..*++= |
|.. ..+=O+. |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 24.1.3 running 'modules:config' at Thu, 28 Nov 2024 14:04:55 +0000. Up 24.77 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 24.1.3 running 'modules:final' at Thu, 28 Nov 2024 14:04:56 +0000. Up 26.03 seconds.
2024-11-28 14:04:56,563 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240705-r0)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
OK: 144 MiB in 151 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:ul6lgLDXTG40qDRu65/qqhT2Pv8xnOzo8GNpP5d6zGk root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:Q2SBDAV+6il6fH2D76Ulgh9re2KrQJQkn/H0WdQD4aU root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:qEmRKVMUD0CT3pG6tnTrup22XuUZi4kXPhcpsTBd3eI root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBKxOHrsFe8oE9f5QAZFBqvZxk/JZ8tgJg8/HZ98iWwkARrPrcfyN6YaSLEn/VhPM+WEzpsPpZHGy8QJ1Y5sOe8w= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAyANNXh2DP6RZ89iA+XwLIE9GMYMqh41Wk4C09CfC7W root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.1.3 finished at Thu, 28 Nov 2024 14:04:58 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net]. Up 28.36 seconds
[ ok ]
Welcome to Alpine Linux 3.20
Kernel 6.6.34-1-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
.........
status: done
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.4-r0 -> 2.14.4-r1)
Executing busybox-1.36.1-r29.trigger
Continuing the upgrade transaction with new apk-tools:
(1/28) Upgrading alpine-conf (3.18.1-r0 -> 3.18.1-r1)
(2/28) Upgrading alpine-release (3.20.1-r0 -> 3.20.3-r0)
(3/28) Upgrading ca-certificates-bundle (20240226-r0 -> 20240705-r0)
(4/28) Upgrading libcrypto3 (3.3.1-r0 -> 3.3.2-r1)
(5/28) Upgrading libssl3 (3.3.1-r0 -> 3.3.2-r1)
(6/28) Upgrading alpine-base (3.20.1-r0 -> 3.20.3-r0)
(7/28) Upgrading ncurses-terminfo-base (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(8/28) Upgrading libncursesw (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(9/28) Upgrading libexpat (2.6.2-r0 -> 2.6.4-r0)
(10/28) Upgrading xz-libs (5.6.1-r3 -> 5.6.2-r0)
(11/28) Upgrading libpanelw (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(12/28) Upgrading python3 (3.12.3-r1 -> 3.12.7-r0)
(13/28) Upgrading python3-pycache-pyc0 (3.12.3-r1 -> 3.12.7-r0)
(14/28) Upgrading pyc (3.12.3-r1 -> 3.12.7-r0)
(15/28) Upgrading py3-requests (2.31.0-r2 -> 2.32.3-r0)
(16/28) Upgrading py3-requests-pyc (2.31.0-r2 -> 2.32.3-r0)
(17/28) Upgrading tzdata (2024a-r1 -> 2024b-r0)
(18/28) Upgrading python3-pyc (3.12.3-r1 -> 3.12.7-r0)
(19/28) Upgrading linux-virt (6.6.34-r1 -> 6.6.63-r0)
(20/28) Upgrading openssh-keygen (9.7_p1-r3 -> 9.7_p1-r4)
(21/28) Upgrading openssh-client-common (9.7_p1-r3 -> 9.7_p1-r4)
(22/28) Upgrading openssh-client-default (9.7_p1-r3 -> 9.7_p1-r4)
(23/28) Upgrading openssh-sftp-server (9.7_p1-r3 -> 9.7_p1-r4)
(24/28) Upgrading openssh-server-common (9.7_p1-r3 -> 9.7_p1-r4)
(25/28) Upgrading openssh-server-common-openrc (9.7_p1-r3 -> 9.7_p1-r4)
(26/28) Upgrading openssh-server (9.7_p1-r3 -> 9.7_p1-r4)
(27/28) Upgrading openssh (9.7_p1-r3 -> 9.7_p1-r4)
(28/28) Upgrading openssh-server-pam (9.7_p1-r3 -> 9.7_p1-r4)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
Executing kmod-32-r0.trigger
Executing mkinitfs-3.10.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.63-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 144 MiB in 151 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.33.1-r0)
(3/10) Installing nghttp2-libs (1.62.1-r0)
(4/10) Installing libpsl (0.21.5-r1)
(5/10) Installing libcurl (8.11.0-r2)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.45.2-r0)
(8/10) Installing git-init-template (2.45.2-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r29.trigger
OK: 154 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/usb-drivers.git usb-drivers
Cloning into 'usb-drivers'...
remote: Enumerating objects: 86, done.
remote: Counting objects: 100% (86/86), done.
remote: Compressing objects: 100% (85/85), done.
remote: Total 86 (delta 45), reused 0 (delta 0), pack-reused 0 (from 0)
Receiving objects: 100% (86/86), 84.34 KiB | 4.22 MiB/s, done.
Resolving deltas: 100% (45/45), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty) registered for path 'liberty'
Cloning into '/home/ci/usb-drivers/liberty'...
remote: Enumerating objects: 772, done.
remote: Counting objects: 100% (241/241), done.
remote: Compressing objects: 100% (238/238), done.
remote: Total 772 (delta 144), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (772/772), 389.97 KiB | 5.49 MiB/s, done.
Resolving deltas: 100% (465/465), done.
Submodule path 'liberty': checked out '492815c8fc38ad6e333b2f1c5094a329e3076155'
+ cd usb-drivers
+ git -c 'advice.detachedHead=false' checkout 8717f425f46500b76c3e11366c96fd70fc00ab5b
HEAD is now at 8717f42 eizo-pcap-decode.go: update for newer models
+ doas apk add --no-interactive build-base cmake help2man libusb-dev hidapi-dev
(1/33) Installing jansson (2.14-r4)
(2/33) Installing binutils (2.42-r0)
(3/33) Installing libmagic (5.45-r1)
(4/33) Installing file (5.45-r1)
(5/33) Installing libgomp (13.2.1_git20240309-r0)
(6/33) Installing libatomic (13.2.1_git20240309-r0)
(7/33) Installing isl26 (0.26-r1)
(8/33) Installing mpfr4 (4.2.1-r0)
(9/33) Installing mpc1 (1.3.1-r1)
(10/33) Installing gcc (13.2.1_git20240309-r0)
(11/33) Installing libstdc++-dev (13.2.1_git20240309-r0)
(12/33) Installing musl-dev (1.2.5-r0)
(13/33) Installing g++ (13.2.1_git20240309-r0)
(14/33) Installing make (4.4.1-r2)
(15/33) Installing fortify-headers (1.1-r3)
(16/33) Installing patch (2.7.6-r10)
(17/33) Installing build-base (0.5-r3)
(18/33) Installing lz4-libs (1.9.4-r5)
(19/33) Installing libarchive (3.7.7-r0)
(20/33) Installing rhash-libs (1.4.4-r0)
(21/33) Installing libuv (1.48.0-r0)
(22/33) Installing cmake (3.29.3-r0)
(23/33) Installing perl (5.38.2-r0)
(24/33) Installing perl-error (0.17029-r2)
(25/33) Installing perl-git (2.45.2-r0)
(26/33) Installing git-perl (2.45.2-r0)
(27/33) Installing help2man (1.49.3-r0)
(28/33) Installing eudev-libs (3.2.14-r2)
(29/33) Installing libusb (1.0.27-r0)
(30/33) Installing hidapi (0.14.0-r0)
(31/33) Installing pkgconf (2.2.0-r0)
(32/33) Installing hidapi-dev (0.14.0-r0)
(33/33) Installing libusb-dev (1.0.27-r0)
Executing busybox-1.36.1-r29.trigger
OK: 467 MiB in 194 packages
+ doas apk add --no-interactive mingw-w64-gcc rsvg-convert icoutils cmake make pkgconf curl libarchive-tools ncurses
(1/51) Installing curl (8.11.0-r2)
(2/51) Installing perl-http-date (6.06-r0)
(3/51) Installing perl-clone (0.46-r2)
(4/51) Installing perl-uri (5.28-r0)
(5/51) Installing perl-io-html (1.004-r1)
(6/51) Installing perl-encode-locale (1.05-r5)
(7/51) Installing perl-lwp-mediatypes (6.04-r3)
(8/51) Installing perl-http-message (6.45-r0)
(9/51) Installing perl-http-cookies (6.11-r0)
(10/51) Installing perl-net-http (6.23-r1)
(11/51) Installing perl-html-tagset (3.24-r0)
(12/51) Installing perl-html-parser (3.82-r0)
(13/51) Installing perl-file-listing (6.16-r0)
(14/51) Installing perl-www-robotrules (6.02-r5)
(15/51) Installing perl-http-negotiate (6.01-r5)
(16/51) Installing perl-try-tiny (0.31-r2)
(17/51) Installing perl-libwww (6.77-r0)
(18/51) Installing libpng (1.6.44-r0)
(19/51) Installing icoutils (0.32.3-r3)
(20/51) Installing libarchive-tools (3.7.7-r0)
(21/51) Installing mingw-w64-binutils (2.42-r0)
(22/51) Installing mingw-w64-crt (11.0.1-r0)
(23/51) Installing mingw-w64-headers (11.0.0-r1)
(24/51) Installing mingw-w64-winpthreads (11.0.0-r2)
(25/51) Installing mingw-w64-gcc (13.2.0-r2)
(26/51) Installing ncurses (6.4_p20240420-r2)
(27/51) Installing libxau (1.0.11-r4)
(28/51) Installing libxdmcp (1.1.5-r1)
(29/51) Installing libxcb (1.16.1-r0)
(30/51) Installing libx11 (1.8.9-r1)
(31/51) Installing libxext (1.3.6-r2)
(32/51) Installing libxrender (0.9.11-r5)
(33/51) Installing freetype (2.13.2-r0)
(34/51) Installing fontconfig (2.15.0-r1)
(35/51) Installing pixman (0.43.2-r0)
(36/51) Installing cairo (1.18.0-r0)
(37/51) Installing libintl (0.22.5-r0)
(38/51) Installing glib (2.80.5-r0)
(39/51) Installing libxml2 (2.12.7-r0)
(40/51) Installing shared-mime-info (2.4-r0)
(41/51) Installing libjpeg-turbo (3.0.3-r0)
(42/51) Installing libsharpyuv (1.3.2-r0)
(43/51) Installing libwebp (1.3.2-r0)
(44/51) Installing tiff (4.6.0t-r0)
(45/51) Installing gdk-pixbuf (2.42.12-r0)
(46/51) Installing libxft (2.3.8-r3)
(47/51) Installing fribidi (1.0.15-r0)
(48/51) Installing graphite2 (1.3.14-r6)
(49/51) Installing harfbuzz (8.5.0-r0)
(50/51) Installing pango (1.52.2-r0)
(51/51) Installing rsvg-convert (2.58.5-r0)
Executing busybox-1.36.1-r29.trigger
Executing glib-2.80.5-r0.trigger
Executing shared-mime-info-2.4-r0.trigger
Executing gdk-pixbuf-2.42.12-r0.trigger
OK: 901 MiB in 245 packages
+ cmake -B build
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Checking for module 'libusb-1.0'
-- Found libusb-1.0, version 1.0.27
-- Configuring done (0.6s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/usb-drivers/build
+ cmake --build build -- package
[ 11%] [32mBuilding C object CMakeFiles/elksmart-comm.dir/elksmart-comm.c.o[0m
[ 22%] [32m[1mLinking C executable elksmart-comm[0m
[ 22%] Built target elksmart-comm
[ 33%] [32mBuilding C object CMakeFiles/razer-bw-te-ctl.dir/razer-bw-te-ctl.c.o[0m
[ 44%] [32m[1mLinking C executable razer-bw-te-ctl[0m
[ 44%] Built target razer-bw-te-ctl
[ 55%] [32mBuilding C object CMakeFiles/eizoctl.dir/eizoctl.c.o[0m
[ 66%] [32m[1mLinking C executable eizoctl[0m
[ 66%] Built target eizoctl
[ 77%] [34m[1mGenerating man page for elksmart-comm[0m
[ 88%] [34m[1mGenerating man page for razer-bw-te-ctl[0m
[100%] [34m[1mGenerating man page for eizoctl[0m
[100%] Built target docs
[36mRun CPack packaging tool...[0m
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build/usb-drivers-1.1.0-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build/usb-drivers-1.1.0-Linux-x86_64.zip generated.
+ sh -e ./Win64Depends.sh
-- Fetching repository DB
######################################################################### 100.0%
-- Resolving mingw-w64-x86_64-hidapi mingw-w64-x86_64-libusb
-- Fetching mingw-w64-x86_64-hidapi-0.14.0-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-gcc-libs-14.2.0-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libusb-1.0.27-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Verifying checksums
-- Extracting packages
-- Success
+ toolchain=/home/ci/usb-drivers/liberty/cmake/toolchains/MinGW-w64-x64.cmake
+ cmake -B build-Win64 '-DCMAKE_TOOLCHAIN_FILE=/home/ci/usb-drivers/liberty/cmake/toolchains/MinGW-w64-x64.cmake'
-- The C compiler identification is GNU 13.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/x86_64-w64-mingw32-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Checking for module 'libusb-1.0'
-- Found libusb-1.0, version 1.0.27
-- Checking for one of the modules 'hidapi;hidapi-hidraw;hidapi-libusb'
-- Configuring done (0.9s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/usb-drivers/build-Win64
+ cmake --build build-Win64 -- package
[ 8%] [32mBuilding C object CMakeFiles/razer-bw-te-ctl.dir/razer-bw-te-ctl.c.obj[0m
[ 16%] [32m[1mLinking C executable razer-bw-te-ctl.exe[0m
[ 16%] Built target razer-bw-te-ctl
[ 25%] [32mBuilding C object CMakeFiles/eizoctl.dir/eizoctl.c.obj[0m
[ 33%] [32m[1mLinking C executable eizoctl.exe[0m
[ 33%] Built target eizoctl
[ 41%] [34m[1mGenerating eizoctltray 48x48 application icon[0m
[ 50%] [34m[1mGenerating eizoctltray 256x256 application icon[0m
[ 58%] [34m[1mGenerating eizoctltray 16x16 application icon[0m
[ 66%] [34m[1mGenerating eizoctltray 32x32 application icon[0m
[ 75%] [34m[1mGenerating Windows program icon[0m
[ 83%] [32mBuilding C object CMakeFiles/eizoctltray.dir/eizoctl.c.obj[0m
[ 91%] [32mBuilding RC object CMakeFiles/eizoctltray.dir/eizoctltray.rc.res[0m
[100%] [32m[1mLinking C executable eizoctltray.exe[0m
[100%] Built target eizoctltray
[36mRun CPack packaging tool...[0m
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build-Win64/usb-drivers-1.1.0-Windows-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build-Win64/usb-drivers-1.1.0-Windows-x86_64.zip generated.