- Project
- p/hex
- Commit
- 019c4302ad86fd6981e8abc90cd8cb58003b662c
- Runner
- Alpine 3.20
- State
- Success
- Notified
- 1
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7l[2J[0mSeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
[2Je%@)0(B[0;37;40m[?25l[2J[23;16HAlpine will be booted automatically in [0;1m1[0m seconds[23;16H[0;37;40mAlpine will be booted automatically in [0;1;37;40m1[0;37;40m seconds..[23;16H [23;16H[0;37;40m [?25h[24;1H[0m
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
c[?7l[2J[ 0.000000] Linux version 6.6.34-1-virt (buildozer@build-3-20-x86_64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #2-Alpine SMP PREEMPT_DYNAMIC Tue, 18 Jun 2024 10:38:37 +0000
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1679989447 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000008] tsc: Detected 1696.074 MHz processor
[ 0.001165] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001213] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001217] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001523] RAMDISK: [mem 0x7f6be000-0x7ffd9fff]
[ 0.001527] ACPI: Early table checksum verification disabled
[ 0.001532] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[ 0.001539] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001549] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001558] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001564] ACPI: FACS 0x000000007FFE0000 000040
[ 0.001570] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001576] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001582] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001586] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[ 0.001589] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[ 0.001590] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.001591] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[ 0.001592] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[ 0.001594] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[ 0.002086] Zone ranges:
[ 0.002088] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.002091] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.002094] Normal empty
[ 0.002095] Movable zone start for each node
[ 0.002096] Early memory node ranges
[ 0.002097] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.002099] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.002102] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.002487] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002516] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.012537] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.013275] ACPI: PM-Timer IO Port: 0x608
[ 0.013296] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.013362] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.013368] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013371] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.013373] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013375] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.013377] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.013385] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013387] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013394] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.013420] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.013443] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.013445] Booting paravirtualized kernel on KVM
[ 0.013447] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.021035] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.021661] percpu: Embedded 57 pages/cpu s195560 r8192 d29720 u1048576
[ 0.021711] kvm-guest: PV spinlocks disabled, no host support
[ 0.021712] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.021790] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.022363] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.022844] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.022947] Built 1 zonelists, mobility grouping on. Total pages: 515802
[ 0.023608] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.030219] Memory: 2012824K/2096608K available (14336K kernel code, 1799K rwdata, 8232K rodata, 2696K init, 2032K bss, 83524K reserved, 0K cma-reserved)
[ 0.041127] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.041277] Kernel/User page tables isolation: enabled
[ 0.042500] Dynamic Preempt: none
[ 0.042640] rcu: Preemptible hierarchical RCU implementation.
[ 0.042641] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.042643] Trampoline variant of Tasks RCU enabled.
[ 0.042644] Tracing variant of Tasks RCU enabled.
[ 0.042645] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.042646] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.047684] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.047934] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.048133] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.056863] Console: colour VGA+ 80x25
[ 0.056930] printk: console [ttyS0] enabled
[ 0.220354] ACPI: Core revision 20230628
[ 0.222086] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.224835] APIC: Switch to symmetric I/O mode setup
[ 0.226694] x2apic enabled
[ 0.228036] APIC: Switched APIC routing to: physical x2apic
[ 0.231574] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.233308] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.236266] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960740)
[ 0.238725] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.240203] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.241827] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.244175] Spectre V2 : Mitigation: Retpolines
[ 0.246266] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.248283] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.249887] Speculative Store Bypass: Vulnerable
[ 0.251015] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.252577] MMIO Stale Data: Unknown: No mitigations
[ 0.253774] x86/fpu: x87 FPU will use FXSAVE
[ 0.277849] Freeing SMP alternatives memory: 32K
[ 0.279001] pid_max: default: 32768 minimum: 301
[ 0.281096] LSM: initializing lsm=lockdown,capability,landlock,integrity
[ 0.284373] landlock: Up and running.
[ 0.285552] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.286270] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.410812] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.413750] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.416245] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.416260] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.416306] signal: max sigframe size: 1440
[ 0.417828] rcu: Hierarchical SRCU implementation.
[ 0.419543] rcu: Max phase no-delay instances is 1000.
[ 0.421779] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.423946] smp: Bringing up secondary CPUs ...
[ 0.426471] smpboot: x86: Booting SMP configuration:
[ 0.428195] .... node #0, CPUs: #1
[ 0.439904] smp: Brought up 1 node, 2 CPUs
[ 0.439904] smpboot: Max logical packages: 1
[ 0.439904] ----------------
[ 0.446267] | NMI testsuite:
[ 0.446990] --------------------
[ 0.447775] remote IPI: ok |
[ 0.448593] local IPI: ok |
[ 0.449393] --------------------
[ 0.450208] Good, all 2 testcases passed! |
[ 0.451262] ---------------------------------
[ 0.452462] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.454744] devtmpfs: initialized
[ 0.454744] x86/mm: Memory block size: 128MB
[ 0.456699] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.459073] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.462816] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.464665] audit: initializing netlink subsys (disabled)
[ 0.466342] audit: type=2000 audit(1733693902.486:1): state=initialized audit_enabled=0 res=1
[ 0.466366] thermal_sys: Registered thermal governor 'step_wise'
[ 0.469292] cpuidle: using governor ladder
[ 0.472269] cpuidle: using governor menu
[ 0.473787] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.476703] PCI: Using configuration type 1 for base access
[ 0.478698] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.489451] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.489451] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.489756] ACPI: Added _OSI(Module Device)
[ 0.489756] ACPI: Added _OSI(Processor Device)
[ 0.496266] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.497592] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.499940] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.503023] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.503023] ACPI: Interpreter enabled
[ 0.503023] ACPI: PM: (supports S0 S3 S5)
[ 0.506266] ACPI: Using IOAPIC for interrupt routing
[ 0.507679] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.510226] PCI: Using E820 reservations for host bridge windows
[ 0.512132] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.518021] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.520207] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.522916] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.525726] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.526790] acpiphp: Slot [3] registered
[ 0.527795] acpiphp: Slot [4] registered
[ 0.528781] acpiphp: Slot [5] registered
[ 0.529845] acpiphp: Slot [6] registered
[ 0.530867] acpiphp: Slot [7] registered
[ 0.531874] acpiphp: Slot [8] registered
[ 0.532863] acpiphp: Slot [9] registered
[ 0.533845] acpiphp: Slot [10] registered
[ 0.536298] acpiphp: Slot [11] registered
[ 0.537579] acpiphp: Slot [12] registered
[ 0.539014] acpiphp: Slot [13] registered
[ 0.540459] acpiphp: Slot [14] registered
[ 0.541705] acpiphp: Slot [15] registered
[ 0.542872] acpiphp: Slot [16] registered
[ 0.544025] acpiphp: Slot [17] registered
[ 0.545174] acpiphp: Slot [18] registered
[ 0.546306] acpiphp: Slot [19] registered
[ 0.547452] acpiphp: Slot [20] registered
[ 0.548600] acpiphp: Slot [21] registered
[ 0.549760] acpiphp: Slot [22] registered
[ 0.550915] acpiphp: Slot [23] registered
[ 0.552078] acpiphp: Slot [24] registered
[ 0.553218] acpiphp: Slot [25] registered
[ 0.554227] acpiphp: Slot [26] registered
[ 0.555233] acpiphp: Slot [27] registered
[ 0.556293] acpiphp: Slot [28] registered
[ 0.557300] acpiphp: Slot [29] registered
[ 0.558303] acpiphp: Slot [30] registered
[ 0.559320] acpiphp: Slot [31] registered
[ 0.560321] PCI host bridge to bus 0000:00
[ 0.561387] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.563289] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.565162] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.566265] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.568345] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.570495] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.572118] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.576294] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.578943] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.584256] pci 0000:00:01.1: reg 0x20: [io 0xc120-0xc12f]
[ 0.586948] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.588932] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.590748] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.592761] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.595180] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.597025] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.599025] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.601409] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.606929] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.613960] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 0.626334] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.628377] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.631466] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.634541] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc11f]
[ 0.637499] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 0.644846] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.647524] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.651310] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.657518] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.660849] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 0.673672] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.679521] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.683930] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0ff]
[ 0.687729] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[ 0.699221] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.706856] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.708493] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.710128] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.711761] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.713368] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.715393] iommu: Default domain type: Translated
[ 0.716269] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.718042] SCSI subsystem initialized
[ 0.719028] pps_core: LinuxPPS API ver. 1 registered
[ 0.719028] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.720061] PTP clock support registered
[ 0.720061] PCI: Using ACPI for IRQ routing
[ 0.726360] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.728445] clocksource: Switched to clocksource kvm-clock
[ 0.731861] VFS: Disk quotas dquot_6.6.0
[ 0.733355] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.735744] pnp: PnP ACPI init
[ 0.735744] pnp: PnP ACPI: found 6 devices
[ 0.744450] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.747745] NET: Registered PF_INET protocol family
[ 0.749900] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.753094] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.755495] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.757659] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.760012] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.762169] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.764720] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.767356] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.769766] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.772374] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.774363] NET: Registered PF_XDP protocol family
[ 0.776052] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.778196] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.780378] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.782761] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.785137] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.787627] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.789697] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.791871] PCI: CLS 0 bytes, default 64
[ 0.793330] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.793480] Unpacking initramfs...
[ 0.796921] Initialise system trusted keyrings
[ 0.799260] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.801562] zbud: loaded
[ 0.802702] Key type asymmetric registered
[ 0.804112] Asymmetric key parser 'x509' registered
[ 0.805828] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.808491] io scheduler mq-deadline registered
[ 0.810344] io scheduler kyber registered
[ 0.811844] io scheduler bfq registered
[ 0.818783] ERST DBG: ERST support is disabled.
[ 0.859571] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.887550] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.916158] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.921008] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.923660] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.927755] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.931076] scsi host0: ata_piix
[ 0.932596] scsi host1: ata_piix
[ 0.933885] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 0.936209] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 0.938796] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.943703] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.945416] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.947291] rtc_cmos 00:05: RTC can wake from S4
[ 0.950464] rtc_cmos 00:05: registered as rtc0
[ 0.952175] rtc_cmos 00:05: setting system clock to 2024-12-08T21:38:22 UTC (1733693902)
[ 0.955114] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.957700] intel_pstate: CPU model not supported
[ 0.959623] gre: GRE over IPv4 demultiplexor driver
[ 0.974116] Freeing initrd memory: 9328K
[ 0.982625] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.986833] NET: Registered PF_INET6 protocol family
[ 0.989240] Segment Routing with IPv6
[ 0.990162] In-situ OAM (IOAM) with IPv6
[ 0.991317] Key type dns_resolver registered
[ 0.992459] IPI shorthand broadcast: enabled
[ 0.997273] sched_clock: Marking stable (822977088, 168315465)->(997228564, -5936011)
[ 1.001549] registered taskstats version 1
[ 1.003220] Loading compiled-in X.509 certificates
[ 1.016979] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 1.021874] Key type .fscrypt registered
[ 1.022945] Key type fscrypt-provisioning registered
[ 1.108844] ata2: found unknown device (class 0)
[ 1.112239] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.116970] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.161153] Freeing unused kernel image (initmem) memory: 2696K
[ 1.163208] Write protecting the kernel read-only data: 24576k
[ 1.166659] Freeing unused kernel image (rodata/data gap) memory: 2008K
[ 1.169260] rodata_test: all tests were successful
[ 1.170920] Run /init as init process
[ 1.199400] Alpine Init 3.10.1-r0
Alpine Init 3.10.1-r0
[ 1.202217] Loading boot drivers...
* Loading boot drivers: [ 1.269210] ACPI: bus type USB registered
[ 1.270020] usbcore: registered new interface driver usbfs
[ 1.271151] usbcore: registered new interface driver hub
[ 1.272166] usbcore: registered new device driver usb
[ 1.278944] usbcore: registered new interface driver usb-storage
[ 1.460617] loop: module loaded
[ 1.508050] ACPI: bus type drm_connector registered
[ 1.548520] Loading boot drivers: ok.
ok.
[ 1.551854] Mounting root...
* Mounting root: [ 1.588292] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.620032] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.621229] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.625303] [drm] Found EDID data blob.
[ 1.626246] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 1.641331] Console: switching to colour frame buffer device 160x50
[ 1.643813] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.780893] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.784146] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.866121] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 1.869374] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.871997] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 1.874277] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.045836] block sr0: the capability attribute has been deprecated.
[ 4.890511] EXT4-fs (vda): mounted filesystem 0487f251-c6cb-4a79-b6c6-03b1b5c178de ro with ordered data mode. Quota mode: none.
[ 4.895341] Mounting root: ok.
ok.
OpenRC 0.54 is starting up Linux 6.6.34-1-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5560/50200 files, 163595/200704 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 24.1.3 running 'init-local' at Sun, 08 Dec 2024 21:38:32 +0000. Up 10.49 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ... [ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 24.1.3 running 'init' at Sun, 08 Dec 2024 21:38:43 +0000. Up 22.41 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::5054:ff:fe12:3456/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:Xn3iNk4rsyhXz9uyfDRlPHTvfjPx9KerNrvOIVuL0D0 root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| |
| ..|
| ..o|
| . .=|
| S . o .+.|
| . o.o oo.o|
| o.ooE. ++|
| . .oo@*B.o*|
| o. +*&X+o=|
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:JwQ6HStAHQq046q7o2PFj5VldrNiGkTI3xYzF6w1ugI root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
|oo+.o.o ... |
| ..=.+ B = |
| o. * + X . |
|. .E = X o |
| .. o * S + |
|. o = + + |
|. . + = . |
|+. . o |
|B= |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:8nD1bDMDBVovawDJYFFYjU/Apdrf0++hoOhbX5bqBTo root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| +O=*. o.. |
| .. =ooo o |
| .oo + . |
| o .o * |
| . + S + B |
| * + + = |
| E + * . |
| o + B o . |
| .+...+ ..o |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 24.1.3 running 'modules:config' at Sun, 08 Dec 2024 21:38:46 +0000. Up 24.49 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 24.1.3 running 'modules:final' at Sun, 08 Dec 2024 21:38:47 +0000. Up 25.74 seconds.
2024-12-08 21:38:47,438 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240705-r0)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
OK: 144 MiB in 151 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:JwQ6HStAHQq046q7o2PFj5VldrNiGkTI3xYzF6w1ugI root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:8nD1bDMDBVovawDJYFFYjU/Apdrf0++hoOhbX5bqBTo root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:Xn3iNk4rsyhXz9uyfDRlPHTvfjPx9KerNrvOIVuL0D0 root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBBCueRLUwSE0//orXro9c3RGcNQM1zGwpRLwdoM2U1gLXVQPuW9JiOIfqsWeqUts75vQstv+4WJScFmAiH0CgoQ= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIOBsLs6sIkCR4nVN15Tnt5+XQ03Ebtme9+VoB7odoN0e root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.1.3 finished at Sun, 08 Dec 2024 21:38:49 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net]. Up 28.10 seconds
[ ok ]
Welcome to Alpine Linux 3.20
Kernel 6.6.34-1-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
........
status: done
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.4-r0 -> 2.14.4-r1)
Executing busybox-1.36.1-r29.trigger
Continuing the upgrade transaction with new apk-tools:
(1/28) Upgrading alpine-conf (3.18.1-r0 -> 3.18.1-r1)
(2/28) Upgrading alpine-release (3.20.1-r0 -> 3.20.3-r0)
(3/28) Upgrading ca-certificates-bundle (20240226-r0 -> 20240705-r0)
(4/28) Upgrading libcrypto3 (3.3.1-r0 -> 3.3.2-r1)
(5/28) Upgrading libssl3 (3.3.1-r0 -> 3.3.2-r1)
(6/28) Upgrading alpine-base (3.20.1-r0 -> 3.20.3-r0)
(7/28) Upgrading ncurses-terminfo-base (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(8/28) Upgrading libncursesw (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(9/28) Upgrading libexpat (2.6.2-r0 -> 2.6.4-r0)
(10/28) Upgrading xz-libs (5.6.1-r3 -> 5.6.2-r0)
(11/28) Upgrading libpanelw (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(12/28) Upgrading python3 (3.12.3-r1 -> 3.12.8-r1)
(13/28) Upgrading python3-pycache-pyc0 (3.12.3-r1 -> 3.12.8-r1)
(14/28) Upgrading pyc (3.12.3-r1 -> 3.12.8-r1)
(15/28) Upgrading py3-requests (2.31.0-r2 -> 2.32.3-r0)
(16/28) Upgrading py3-requests-pyc (2.31.0-r2 -> 2.32.3-r0)
(17/28) Upgrading tzdata (2024a-r1 -> 2024b-r0)
(18/28) Upgrading python3-pyc (3.12.3-r1 -> 3.12.8-r1)
(19/28) Upgrading linux-virt (6.6.34-r1 -> 6.6.63-r0)
(20/28) Upgrading openssh-keygen (9.7_p1-r3 -> 9.7_p1-r4)
(21/28) Upgrading openssh-client-common (9.7_p1-r3 -> 9.7_p1-r4)
(22/28) Upgrading openssh-client-default (9.7_p1-r3 -> 9.7_p1-r4)
(23/28) Upgrading openssh-sftp-server (9.7_p1-r3 -> 9.7_p1-r4)
(24/28) Upgrading openssh-server-common (9.7_p1-r3 -> 9.7_p1-r4)
(25/28) Upgrading openssh-server-common-openrc (9.7_p1-r3 -> 9.7_p1-r4)
(26/28) Upgrading openssh-server (9.7_p1-r3 -> 9.7_p1-r4)
(27/28) Upgrading openssh (9.7_p1-r3 -> 9.7_p1-r4)
(28/28) Upgrading openssh-server-pam (9.7_p1-r3 -> 9.7_p1-r4)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
Executing kmod-32-r0.trigger
Executing mkinitfs-3.10.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.63-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 144 MiB in 151 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.33.1-r0)
(3/10) Installing nghttp2-libs (1.62.1-r0)
(4/10) Installing libpsl (0.21.5-r1)
(5/10) Installing libcurl (8.11.0-r2)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.45.2-r0)
(8/10) Installing git-init-template (2.45.2-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r29.trigger
OK: 154 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/hex.git hex
Cloning into 'hex'...
remote: Enumerating objects: 409, done.
remote: Counting objects: 100% (96/96), done.
remote: Compressing objects: 100% (96/96), done.
remote: Total 409 (delta 52), reused 0 (delta 0), pack-reused 313 (from 1)
Receiving objects: 100% (409/409), 217.44 KiB | 6.79 MiB/s, done.
Resolving deltas: 100% (242/242), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Submodule 'termo' (https://git.janouch.name/p/termo.git) registered for path 'termo'
Cloning into '/home/ci/hex/liberty'...
remote: Enumerating objects: 775, done.
remote: Counting objects: 100% (244/244), done.
remote: Compressing objects: 100% (241/241), done.
remote: Total 775 (delta 146), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (775/775), 390.90 KiB | 6.86 MiB/s, done.
Resolving deltas: 100% (467/467), done.
Cloning into '/home/ci/hex/termo'...
remote: Enumerating objects: 1977, done.
remote: Counting objects: 100% (38/38), done.
remote: Compressing objects: 100% (37/37), done.
remote: Total 1977 (delta 14), reused 0 (delta 0), pack-reused 1939 (from 1)
Receiving objects: 100% (1977/1977), 1.38 MiB | 8.12 MiB/s, done.
Resolving deltas: 100% (1259/1259), done.
Submodule path 'liberty': checked out '75fc6f1c374796f9e794297c3893089009b8772f'
Submodule path 'termo': checked out '8265f075b176b33680012094aa1ced5721e55ac9'
+ cd hex
+ git -c 'advice.detachedHead=false' checkout 019c4302ad86fd6981e8abc90cd8cb58003b662c
HEAD is now at 019c430 Handle tiny files gracefully
+ doas apk add --no-interactive build-base cmake asciidoctor rsvg-convert libunistring-dev ncurses-dev lua5.4-dev libx11-dev libxft-dev libpng-dev
(1/79) Installing ruby-libs (3.3.6-r0)
(2/79) Installing libucontext (1.2-r3)
(3/79) Installing ruby (3.3.6-r0)
(4/79) Installing asciidoctor (2.0.23-r0)
(5/79) Installing jansson (2.14-r4)
(6/79) Installing binutils (2.42-r0)
(7/79) Installing libmagic (5.45-r1)
(8/79) Installing file (5.45-r1)
(9/79) Installing libgomp (13.2.1_git20240309-r0)
(10/79) Installing libatomic (13.2.1_git20240309-r0)
(11/79) Installing isl26 (0.26-r1)
(12/79) Installing mpfr4 (4.2.1-r0)
(13/79) Installing mpc1 (1.3.1-r1)
(14/79) Installing gcc (13.2.1_git20240309-r0)
(15/79) Installing libstdc++-dev (13.2.1_git20240309-r0)
(16/79) Installing musl-dev (1.2.5-r0)
(17/79) Installing g++ (13.2.1_git20240309-r0)
(18/79) Installing make (4.4.1-r2)
(19/79) Installing fortify-headers (1.1-r3)
(20/79) Installing patch (2.7.6-r10)
(21/79) Installing build-base (0.5-r3)
(22/79) Installing lz4-libs (1.9.4-r5)
(23/79) Installing libarchive (3.7.7-r0)
(24/79) Installing rhash-libs (1.4.4-r0)
(25/79) Installing libuv (1.48.0-r0)
(26/79) Installing cmake (3.29.3-r0)
(27/79) Installing libpng (1.6.44-r0)
(28/79) Installing pkgconf (2.2.0-r0)
(29/79) Installing zlib-dev (1.3.1-r1)
(30/79) Installing libpng-dev (1.6.44-r0)
(31/79) Installing libunistring-dev (1.2-r0)
(32/79) Installing libxau (1.0.11-r4)
(33/79) Installing xorgproto (2024.1-r0)
(34/79) Installing libxau-dev (1.0.11-r4)
(35/79) Installing xcb-proto (1.16.0-r1)
(36/79) Installing xcb-proto-pyc (1.16.0-r1)
(37/79) Installing libxdmcp (1.1.5-r1)
(38/79) Installing libxcb (1.16.1-r0)
(39/79) Installing libxdmcp-dev (1.1.5-r1)
(40/79) Installing libxcb-dev (1.16.1-r0)
(41/79) Installing xtrans (1.5.0-r0)
(42/79) Installing libx11 (1.8.9-r1)
(43/79) Installing libx11-dev (1.8.9-r1)
(44/79) Installing libxrender (0.9.11-r5)
(45/79) Installing freetype (2.13.2-r0)
(46/79) Installing fontconfig (2.15.0-r1)
(47/79) Installing libxft (2.3.8-r3)
(48/79) Installing expat (2.6.4-r0)
(49/79) Installing expat-dev (2.6.4-r0)
(50/79) Installing brotli (1.1.0-r2)
(51/79) Installing brotli-dev (1.1.0-r2)
(52/79) Installing freetype-dev (2.13.2-r0)
(53/79) Installing fontconfig-dev (2.15.0-r1)
(54/79) Installing libxrender-dev (0.9.11-r5)
(55/79) Installing libxft-dev (2.3.8-r3)
(56/79) Installing lua5.4-libs (5.4.6-r1)
(57/79) Installing lua5.4 (5.4.6-r1)
(58/79) Installing lua5.4-dev (5.4.6-r1)
(59/79) Installing libformw (6.4_p20240420-r2)
(60/79) Installing libmenuw (6.4_p20240420-r2)
(61/79) Installing libncurses++ (6.4_p20240420-r2)
(62/79) Installing ncurses-dev (6.4_p20240420-r2)
(63/79) Installing libxext (1.3.6-r2)
(64/79) Installing pixman (0.43.2-r0)
(65/79) Installing cairo (1.18.0-r0)
(66/79) Installing libintl (0.22.5-r0)
(67/79) Installing glib (2.80.5-r0)
(68/79) Installing libxml2 (2.12.7-r0)
(69/79) Installing shared-mime-info (2.4-r0)
(70/79) Installing libjpeg-turbo (3.0.3-r0)
(71/79) Installing libsharpyuv (1.3.2-r0)
(72/79) Installing libwebp (1.3.2-r0)
(73/79) Installing tiff (4.6.0t-r0)
(74/79) Installing gdk-pixbuf (2.42.12-r0)
(75/79) Installing fribidi (1.0.15-r0)
(76/79) Installing graphite2 (1.3.14-r6)
(77/79) Installing harfbuzz (8.5.0-r0)
(78/79) Installing pango (1.52.2-r0)
(79/79) Installing rsvg-convert (2.58.5-r0)
Executing busybox-1.36.1-r29.trigger
Executing glib-2.80.5-r0.trigger
Executing shared-mime-info-2.4-r0.trigger
Executing gdk-pixbuf-2.42.12-r0.trigger
OK: 482 MiB in 240 packages
+ cmake -B build
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Found Ncursesw: ncursesw
-- Found Unistring: /usr/include
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
CMake Deprecation Warning at termo/CMakeLists.txt:1 (cmake_minimum_required):
Compatibility with CMake < 3.5 will be removed from a future version of
CMake.
Update the VERSION argument <min> value or use a ...<max> suffix to tell
CMake that the project does not need compatibility with older versions.
-- Found Curses: /usr/lib/libcurses.so
-- Checking for modules 'glib-2.0;gio-2.0'
-- Package 'glib-2.0' not found
-- Package 'gio-2.0' not found
-- Checking for module 'unibilium>=0.1.0'
-- Package 'unibilium' not found
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Checking for modules 'x11;xrender;xft;fontconfig;libpng'
-- Found x11, version 1.8.9
-- Found xrender, version 0.9.11
-- Found xft, version 2.3.8
-- Found fontconfig, version 2.15.0
-- Found libpng, version 1.6.44
-- Looking for resizeterm
-- Looking for resizeterm - found
-- Configuring done (2.2s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/hex/build
+ cmake --build build -- package
[ 10%] [32mBuilding C object termo/CMakeFiles/termo-static.dir/termo.c.o[0m
[ 20%] [32mBuilding C object termo/CMakeFiles/termo-static.dir/driver-csi.c.o[0m
[ 30%] [32mBuilding C object termo/CMakeFiles/termo-static.dir/driver-ti.c.o[0m
[ 40%] [32m[1mLinking C static library libtermo-0.a[0m
[ 40%] Built target termo-static
[ 50%] [32mBuilding C object CMakeFiles/hex.dir/hex.c.o[0m
[ 60%] [32m[1mLinking C executable hex[0m
[ 60%] Built target hex
[ 70%] [34m[1mGenerating hex 16x16 application icon[0m
[ 80%] [34m[1mGenerating hex 32x32 application icon[0m
[ 90%] [34m[1mGenerating hex 48x48 application icon[0m
[ 90%] Built target icons
[100%] [34m[1mGenerating man page for hex[0m
[100%] Built target docs
[36mRun CPack packaging tool...[0m
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: hex
CPack: - Install project: hex []
CPack: Create package
CPack: - package: /home/ci/hex/build/hex-0.1.0-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: hex
CPack: - Install project: hex []
CPack: Create package
CPack: - package: /home/ci/hex/build/hex-0.1.0-Linux-x86_64.zip generated.