- Project
- p/fiv
- Commit
- 3bea18708fa17339136f6860ae38c9882f5b6ed5
- Runner
- Arch Linux
- State
- Success
- Notified
- 1
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=arch
+ acid_image=Arch-Linux-x86_64-cloudimg.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/Arch-Linux-x86_64-cloudimg.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/Arch-Linux-x86_64-cloudimg.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
GRUB loading...
Welcome to GRUB!
GNU GRUB version 2:2.12-3
+----------------------------------------------------------------------------+
|*Arch Linux |
| Advanced options for Arch Linux |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+----------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line.
GNU GRUB version 2:2.12-3
┌────────────────────────────────────────────────────────────────────────────┐
│*Arch Linux │
│ Advanced options for Arch Linux │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└────────────────────────────────────────────────────────────────────────────┘
Use the ↑ and ↓ keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
The highlighted entry will be executed automatically in 0s.
The highlighted entry will be executed automatically in 0s.
Booting `Arch Linux' Booting `Arch Linux
'
Loading Linux linux ...Loading Linux linux ..
.
Loading initial ramdisk ...Loading initial ramdisk ..
.
:: running early hook [udev]
Starting systemd-udevd version 256.7-1-arch
:: running hook [udev]
:: Triggering uevents...
:: running hook [keymap]
:: Loading keymap...kbd_mode: KDSKBMODE: Inappropriate ioctl for device
^[%@done.
:: performing fsck on 'UUID=916b2b67-b5da-42d8-9056-b18039942a54'
:: mounting 'UUID=916b2b67-b5da-42d8-9056-b18039942a54' on real root
:: running cleanup hook [udev]
^[[!p^[]104^[[?7h
Welcome to Arch Linux!
[ 3.174340] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ OK ] Created slice Slice /system/dirmngr.
[ OK ] Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/gpg-agent.
[ OK ] Created slice Slice /system/gpg-agent-browser.
[ OK ] Created slice Slice /system/gpg-agent-extra.
[ OK ] Created slice Slice /system/gpg-agent-ssh.
[ OK ] Created slice Slice /system/keyboxd.
[ OK ] Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/serial-getty.
[ OK ] Created slice User and Session Slice.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Set up automount Arbitrary Executa…ormats File System Automount Point.
Expecting device /dev/ttyS0...
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Local Integrity Protected Volumes.
[ OK ] Reached target Path Units.
[ OK ] Reached target Remote Encrypted Volumes.
[ OK ] Reached target Remote File Systems.
[ OK ] Reached target Slice Units.
[ OK ] Reached target Local Verity Protected Volumes.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on Process Core Dump Socket.
[ OK ] Listening on Credential Encryption/Decryption.
[ OK ] Listening on Journal Audit Socket.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Sockets.
[ OK ] Listening on DDI File System Mounter Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ OK ] Listening on Namespace Resource Manager Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on User Database Manager Socket.
Mounting Huge Pages File System...
Mounting POSIX Message Queue File System...
Mounting Kernel Debug File System...
Mounting Kernel Trace File System...
Starting Create List of Static Device Nodes...
Starting Load Kernel Module configfs...
Starting Load Kernel Module dm_mod...
Starting Load Kernel Module drm...
Starting Load Kernel Module efi_pstore...
Starting Load Kernel Module fuse...
Starting Load Kernel Module loop...
Starting Journal Service...
Starting Load Kernel Modules...
Starting Generate network units from Kernel command line...
Starting Remount Root and Kernel File Systems...
Starting Wait Until Kernel Time Synchronized...
Starting Load udev Rules from Credentials...
Starting Coldplug All udev Devices...
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted Kernel Trace File System.
[ OK ] Finished Create List of Static Device Nodes.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module dm_mod.
[ OK ] Started Journal Service.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module efi_pstore.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Module loop.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Generate network units from Kernel command line.
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Finished Load udev Rules from Credentials.
Activating swap /swap/swapfile...
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
Starting Flush Journal to Persistent Storage...
Starting Load/Save OS Random Seed...
Starting Apply Kernel Variables...
Starting Create Static Device Nodes in /dev gracefully...
[ OK ] Activated swap /swap/swapfile.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Reached target Swaps.
Mounting Temporary Directory /tmp...
[ OK ] Finished Apply Kernel Variables.
[ OK ] Mounted Temporary Directory /tmp.
[ OK ] Finished Flush Journal to Persistent Storage.
Starting Namespace Resource Manager...
Starting User Database Manager...
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Started User Database Manager.
[ OK ] Started Namespace Resource Manager.
[ OK ] Finished Create Static Device Nodes in /dev gracefully.
Starting Create System Users...
[ OK ] Finished Create System Users.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Preparation for Local File Systems.
[ OK ] Set up automount EFI System Partition Automount.
[ OK ] Reached target Local File Systems.
[ OK ] Reached target Containers.
[ OK ] Listening on Boot Entries Service Socket.
[ OK ] Listening on System Extension Image Management.
Starting Rebuild Dynamic Linker Cache...
Starting Automatic Boot Loader Update...
Starting Create System Files and Directories...
Starting Rule-based Manager for Device Events and Files...
[ OK ] Finished Load/Save OS Random Seed.
[ OK ] Created slice Slice /system/systemd-fsck.
Expecting device /dev/disk/by-diskseq/9-part2...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Finished Create System Files and Directories.
Starting First Boot Wizard...
Starting Rebuild Journal Catalog...
Starting Network Name Resolution...
Starting Network Time Synchronization...
Starting Record System Boot/Shutdown in UTMP...
[ OK ] Finished First Boot Wizard.
[ OK ] Found device /dev/ttyS0.
[ OK ] Reached target First Boot Complete.
Starting Save Transient machine-id to Disk...
[ OK ] Finished Rebuild Journal Catalog.
[ OK ] Finished Record System Boot/Shutdown in UTMP.
[ OK ] Started Network Time Synchronization.
[ OK ] Finished Save Transient machine-id to Disk.
[ OK ] Reached target System Time Set.
[ OK ] Found device /dev/disk/by-diskseq/9-part2.
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Host and Network Name Lookups.
Starting File System Check on /dev/disk/by-diskseq/9-part2...
[ OK ] Finished File System Check on /dev/disk/by-diskseq/9-part2.
Mounting EFI System Partition Automount...
[ OK ] Finished Rebuild Dynamic Linker Cache.
[ OK ] Mounted EFI System Partition Automount.
[ OK ] Finished Automatic Boot Loader Update.
Starting Update is Completed...
[ OK ] Finished Update is Completed.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on OpenSSH Server Socket…temd-ssh-generator, AF_UNIX Local).
[ OK ] Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_VSOCK).
[ OK ] Reached target SSH Access Available.
[ OK ] Listening on Hostname Service Socket.
[ OK ] Reached target Socket Units.
Starting D-Bus System Message Bus...
Starting Virtual Console Setup...
[ OK ] Started D-Bus System Message Bus.
[ OK ] Stopped Virtual Console Setup.
[ OK ] Reached target Basic System.
Starting Cloud-init: Single Process...
Starting SSH Key Generation...
Starting Home Area Manager...
Starting User Login Management...
Starting Virtual Console Setup...
[ OK ] Started Home Area Manager.
[ OK ] Finished Home Area Activation.
[ OK ] Finished Virtual Console Setup.
[ OK ] Started User Login Management.
[ OK ] Finished SSH Key Generation.
[ OK ] Started Cloud-init: Single Process.
Starting Cloud-init: Local Stage (pre-network)...
[ 9.305013] cloud-init[402]: Cloud-init v. 24.3.1 running 'init-local' at Thu, 26 Dec 2024 00:21:28 +0000. Up 9.26 seconds.
[ 9.514404] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 9.681095] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 9.814593] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 9.971003] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 10.124319] I/O error, dev fd0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 10.270986] sh[399]: Completed socket interaction for boot stage local
[ OK ] Finished Cloud-init: Local Stage (pre-network).
[ OK ] Reached target Preparation for Network.
Starting Network Configuration...
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ OK ] Started Network Configuration.
[ OK ] Reached target Network.
Starting Enable Persistent Storage in systemd-networkd...
Starting Wait for Network to be Configured...
[ OK ] Finished Enable Persistent Storage in systemd-networkd.
[ OK ] Finished Wait for Network to be Configured.
Starting Cloud-init: Network Stage...
[ 12.598761] cloud-init[402]: Cloud-init v. 24.3.1 running 'init' at Thu, 26 Dec 2024 00:21:31 +0000. Up 12.57 seconds.
[ 12.625560] cloud-init[402]: ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
[ 12.630250] cloud-init[402]: ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
[ 12.634677] cloud-init[402]: ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
[ 12.639066] cloud-init[402]: ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
[ 12.643453] cloud-init[402]: ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
[ 12.647950] cloud-init[402]: ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
[ 12.651799] cloud-init[402]: ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
[ 12.655778] cloud-init[402]: ci-info: | lo | True | ::1/128 | . | host | . |
[ 12.659711] cloud-init[402]: ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
[ 12.662864] cloud-init[402]: ci-info: ++++++++++++++++++++++++++++Route IPv4 info+++++++++++++++++++++++++++++
[ 12.666203] cloud-init[402]: ci-info: +-------+-------------+----------+-----------------+-----------+-------+
[ 12.669529] cloud-init[402]: ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
[ 12.672221] cloud-init[402]: ci-info: +-------+-------------+----------+-----------------+-----------+-------+
[ 12.674798] cloud-init[402]: ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
[ 12.677365] cloud-init[402]: ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
[ 12.679826] cloud-init[402]: ci-info: | 2 | 10.0.2.2 | 0.0.0.0 | 255.255.255.255 | eth0 | UH |
[ 12.682426] cloud-init[402]: ci-info: | 3 | 10.0.2.3 | 0.0.0.0 | 255.255.255.255 | eth0 | UH |
[ 12.685009] cloud-init[402]: ci-info: +-------+-------------+----------+-----------------+-----------+-------+
[ 12.687573] cloud-init[402]: ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
[ 12.689682] cloud-init[402]: ci-info: +-------+-------------+---------+-----------+-------+
[ 12.691904] cloud-init[402]: ci-info: | Route | Destination | Gateway | Interface | Flags |
[ 12.694104] cloud-init[402]: ci-info: +-------+-------------+---------+-----------+-------+
[ 12.696213] cloud-init[402]: ci-info: | 0 | fe80::/64 | :: | eth0 | U |
[ 12.698445] cloud-init[402]: ci-info: | 2 | local | :: | eth0 | U |
[ 12.700697] cloud-init[402]: ci-info: | 3 | multicast | :: | eth0 | U |
[ 12.702814] cloud-init[402]: ci-info: +-------+-------------+---------+-----------+-------+
Starting Hostname Service...
[ OK ] Started Hostname Service.
[ 14.275553] sh[430]: Completed socket interaction for boot stage network
[ OK ] Finished Cloud-init: Network Stage.
[ OK ] Reached target Cloud-config availability.
[ OK ] Reached target Network is Online.
Starting Cloud-init: Config Stage...
Starting Permit User Sessions...
[ OK ] Finished Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ 14.442289] cloud-init[402]: Cloud-init v. 24.3.1 running 'modules:config' at Thu, 26 Dec 2024 00:21:33 +0000. Up 14.39 seconds.
[ 14.477171] cloud-init[402]: Generating locales...
[ 17.285071] cloud-init[402]: en_US.UTF-8... done
[ 17.287067] cloud-init[402]: Generation complete.
Starting Locale Service...
[ OK ] Started Locale Service.
[ 17.906442] sh[517]: Completed socket interaction for boot stage config
[ OK ] Finished Cloud-init: Config Stage.
Arch Linux 6.11.5-arch1-1 (ttyS0)
arch-ci login: [ 81.917225] cloud-init[402]: Cloud-init v. 24.3.1 running 'modules:final' at Thu, 26 Dec 2024 00:22:41 +0000. Up 81.87 seconds.
[ 82.003754] cloud-init[402]: /usr/bin/trust
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
<14>Dec 26 01:22:44 cloud-init: #############################################################
<14>Dec 26 01:22:44 cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
<14>Dec 26 01:22:44 cloud-init: 256 SHA256:98zM9WTUiV2U/nW7lrFl9ie6HQDbc90GhqiYHXNnthk root@arch-ci (ECDSA)
<14>Dec 26 01:22:44 cloud-init: 256 SHA256:nfe/qFjO9CyA5mMjMqQ6aR+pNQCsRNeUCDGMPJrT35M root@arch-ci (ED25519)
<14>Dec 26 01:22:44 cloud-init: 3072 SHA256:74SjF7VVhRRvRjVKO9CL9S8Bv4TSRmY/CLEuKa005GY root@arch-ci (RSA)
<14>Dec 26 01:22:44 cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
<14>Dec 26 01:22:44 cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBCcKtqI+ivP0LW5npLg2oDa6s6IRQC5+f2L++LYYs55zMJ0bSslIiReKXNn7PqGv7pdXLLJhRVUCqcIk5JvZCXg= root@arch-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEY+GccnGEQZOY6y1/W0FYIENFBVZausWOmA8Rqz23qR root@arch-ci
ssh-rsa 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 root@arch-ci
-----END SSH HOST KEY KEYS-----
[ 85.340216] cloud-init[402]: Cloud-init v. 24.3.1 finished at Thu, 26 Dec 2024 00:22:44 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 85.32 seconds
[ 85.348079] cloud-init[402]: Generating public/private rsa key pair.
[ 85.350963] cloud-init[402]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key
[ 85.353105] cloud-init[402]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
[ 85.356980] cloud-init[402]: The key fingerprint is:
[ 85.358484] cloud-init[402]: SHA256:74SjF7VVhRRvRjVKO9CL9S8Bv4TSRmY/CLEuKa005GY root@arch-ci
[ 85.362241] cloud-init[402]: The key's randomart image is:
[ 85.363749] cloud-init[402]: +---[RSA 3072]----+
[ 85.365048] cloud-init[402]: | .o.oo==|
[ 85.366339] cloud-init[402]: | ..Bo=o.|
[ 85.367744] cloud-init[402]: | . .*o@o +|
[ 85.369046] cloud-init[402]: | o . oo.*.B+ |
[ 85.370505] cloud-init[402]: | E S..= . +.|
[ 85.371759] cloud-init[402]: | + +.+. o .|
[ 85.373001] cloud-init[402]: | . o.o . |
[ 85.374426] cloud-init[402]: | ..+ |
[ 85.375719] cloud-init[402]: | .. . |
[ 85.377502] cloud-init[402]: +----[SHA256]-----+
[ 85.378986] cloud-init[402]: Generating public/private ecdsa key pair.
[ 85.380712] cloud-init[402]: Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
[ 85.383318] cloud-init[402]: Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
[ 85.386170] cloud-init[402]: The key fingerprint is:
[ 85.387960] cloud-init[402]: SHA256:98zM9WTUiV2U/nW7lrFl9ie6HQDbc90GhqiYHXNnthk root@arch-ci
[ 85.390899] cloud-init[402]: The key's randomart image is:
[ 85.392749] cloud-init[402]: +---[ECDSA 256]---+
[ 85.394448] cloud-init[402]: | .+|
[ 85.396023] cloud-init[402]: | . .o.+|
[ 85.397629] cloud-init[402]: | o + E.+oo|
[ 85.399223] cloud-init[402]: | + = B = =+|
[ 85.400897] cloud-init[402]: | o S o * o @|
[ 85.402479] cloud-init[402]: | . * = B=|
[ 85.404148] cloud-init[402]: | * .oO|
[ 85.405739] cloud-init[402]: | ..*o|
[ 85.407412] cloud-init[402]: | ooo..|
[ 85.409047] cloud-init[402]: +----[SHA256]-----+
[ 85.410784] cloud-init[402]: Generating public/private ed25519 key pair.
[ 85.413101] cloud-init[402]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
[ 85.416040] cloud-init[402]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
[ 85.418994] cloud-init[402]: The key fingerprint is:
[ 85.420746] cloud-init[402]: SHA256:nfe/qFjO9CyA5mMjMqQ6aR+pNQCsRNeUCDGMPJrT35M root@arch-ci
[ 85.423492] cloud-init[402]: The key's randomart image is:
[ 85.425412] cloud-init[402]: +--[ED25519 256]--+
[ 85.427043] cloud-init[402]: |+=o.+.. |
[ 85.428710] cloud-init[402]: |++o. o |
[ 85.430367] cloud-init[402]: |o=. |
[ 85.432082] cloud-init[402]: |B . . . |
[ 85.433670] cloud-init[402]: |.o . . .S o . |
[ 85.435386] cloud-init[402]: | ..o Eo . . . |
[ 85.436987] cloud-init[402]: | .o= o. .o . |
[ 85.438897] cloud-init[402]: |ooooo. = *.o .. |
[ 85.440657] cloud-init[402]: |+o..o o o. +o+ .o|
[ 85.442468] cloud-init[402]: +----[SHA256]-----+
[ 85.444541] sh[869]: Completed socket interaction for boot stage final
Task log
........
status: done
+ sudo pacman -Syu --noconfirm git
:: Synchronizing package databases...
core 118.0 KiB 599 KiB/s 00:00 [######################] 100%
extra 7.5 MiB 3.14 MiB/s 00:02 [######################] 100%
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
Packages (74) archlinux-keyring-20241203-1 audit-4.0.2-3 brotli-1.1.0-3
btrfs-progs-6.12-2 ca-certificates-mozilla-3.107-1
cloud-init-24.3.1-3 curl-8.11.1-3 db5.3-5.3.28-5 dbus-1.16.0-1
device-mapper-2.03.29-1 expat-2.6.4-1 file-5.46-2
filesystem-2024.11.21-1 gcc-libs-14.2.1+r134+gab884fffe3fc-2
glib2-2.82.4-2 gnupg-2.4.7-1 gnutls-3.8.8-1 gpgme-1.24.1-3
hwdata-0.390-1 iana-etc-20241206-1 iproute2-6.12.0-1
kbd-2.7.1-1 libbpf-1.5.0-1 libcap-ng-0.8.5-3 libelf-0.192-2
libgpg-error-1.51-1 libldap-2.6.9-1 libnghttp3-1.7.0-1
libnl-3.11.0-1 libseccomp-2.5.5-4 libsysprof-capture-47.2-1
libxml2-2.13.5-2 linux-6.12.6.arch1-1 mkinitcpio-39.2-3
npth-1.8-1 pacman-7.0.0.r6.gc685ae6-1 pam-1.7.0-1
perl-5.40.0-1 perl-error-0.17029-7 perl-mailtools-2.22-1
perl-timedate-2.33-7 procps-ng-4.0.5-1 python-3.13.1-1
python-attrs-23.2.0-4 python-cffi-1.17.1-2
python-charset-normalizer-3.4.0-5 python-configobj-5.0.9-2
python-cryptography-44.0.0-1 python-idna-3.10-2
python-jinja-1:3.1.5-1 python-jsonpatch-1.33-4
python-jsonpointer-3.0.0-2 python-jsonschema-4.23.0-2
python-jsonschema-specifications-2024.10.1-1
python-markupsafe-2.1.5-3 python-netifaces-0.11.0-7
python-oauthlib-3.2.2-4 python-pycparser-2.22-3
python-pyserial-3.5-7 python-referencing-0.35.1-3
python-requests-2.32.3-4 python-rpds-py-0.22.3-1
python-six-1.16.0-10 python-typing_extensions-4.12.2-3
python-urllib3-1.26.20-4 python-yaml-6.0.2-2 sqlite-3.47.2-1
sudo-1.9.16.p2-2 systemd-257.1-1 systemd-libs-257.1-1
systemd-sysvcompat-257.1-1 util-linux-2.40.2-2
util-linux-libs-2.40.2-2 git-2.47.1-1
Total Download Size: 261.73 MiB
Total Installed Size: 674.65 MiB
Net Upgrade Size: 110.68 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
linux-6.12.6.arc... 137.7 MiB 22.7 MiB/s 00:06 [######################] 100%
gcc-libs-14.2.1+... 35.0 MiB 20.9 MiB/s 00:02 [######################] 100%
perl-5.40.0-1-x86_64 20.0 MiB 23.9 MiB/s 00:01 [######################] 100%
python-3.13.1-1-... 12.3 MiB 23.2 MiB/s 00:01 [######################] 100%
systemd-257.1-1-... 8.8 MiB 23.7 MiB/s 00:00 [######################] 100%
git-2.47.1-1-x86_64 6.5 MiB 25.6 MiB/s 00:00 [######################] 100%
glib2-2.82.4-2-x... 4.9 MiB 21.9 MiB/s 00:00 [######################] 100%
util-linux-2.40.... 2.9 MiB 25.2 MiB/s 00:00 [######################] 100%
gnupg-2.4.7-1-x86_64 2.8 MiB 23.1 MiB/s 00:00 [######################] 100%
gnutls-3.8.8-1-x... 2.7 MiB 24.2 MiB/s 00:00 [######################] 100%
sqlite-3.47.2-1-... 1992.5 KiB 24.3 MiB/s 00:00 [######################] 100%
sudo-1.9.16.p2-2... 1923.0 KiB 23.5 MiB/s 00:00 [######################] 100%
hwdata-0.390-1-any 1650.7 KiB 21.8 MiB/s 00:00 [######################] 100%
cloud-init-24.3.... 1385.0 KiB 25.5 MiB/s 00:00 [######################] 100%
kbd-2.7.1-1-x86_64 1254.2 KiB 20.4 MiB/s 00:00 [######################] 100%
btrfs-progs-6.12... 1232.5 KiB 22.7 MiB/s 00:00 [######################] 100%
systemd-libs-257... 1227.3 KiB 20.0 MiB/s 00:00 [######################] 100%
db5.3-5.3.28-5-x... 1213.0 KiB 26.9 MiB/s 00:00 [######################] 100%
archlinux-keyrin... 1204.3 KiB 25.0 MiB/s 00:00 [######################] 100%
python-cryptogra... 1143.0 KiB 18.6 MiB/s 00:00 [######################] 100%
curl-8.11.1-3-x86_64 1135.9 KiB 19.5 MiB/s 00:00 [######################] 100%
iproute2-6.12.0-... 1124.5 KiB 25.5 MiB/s 00:00 [######################] 100%
pacman-7.0.0.r6.... 945.9 KiB 21.5 MiB/s 00:00 [######################] 100%
pam-1.7.0-1-x86_64 913.2 KiB 24.1 MiB/s 00:00 [######################] 100%
procps-ng-4.0.5-... 883.9 KiB 19.6 MiB/s 00:00 [######################] 100%
libxml2-2.13.5-2... 838.6 KiB 22.7 MiB/s 00:00 [######################] 100%
libelf-0.192-2-x... 596.6 KiB 24.3 MiB/s 00:00 [######################] 100%
util-linux-libs-... 474.4 KiB 23.2 MiB/s 00:00 [######################] 100%
gpgme-1.24.1-3-x... 462.1 KiB 22.6 MiB/s 00:00 [######################] 100%
file-5.46-2-x86_64 430.9 KiB 21.0 MiB/s 00:00 [######################] 100%
libnl-3.11.0-1-x... 410.3 KiB 20.0 MiB/s 00:00 [######################] 100%
iana-etc-2024120... 399.0 KiB 19.5 MiB/s 00:00 [######################] 100%
audit-4.0.2-3-x86_64 395.2 KiB 22.7 MiB/s 00:00 [######################] 100%
brotli-1.1.0-3-x... 389.6 KiB 19.0 MiB/s 00:00 [######################] 100%
ca-certificates-... 383.1 KiB 23.4 MiB/s 00:00 [######################] 100%
dbus-1.16.0-1-x86_64 346.4 KiB 14.1 MiB/s 00:00 [######################] 100%
python-jinja-1:3... 305.0 KiB 12.9 MiB/s 00:00 [######################] 100%
libldap-2.6.9-1-... 281.3 KiB 27.5 MiB/s 00:00 [######################] 100%
python-cffi-1.17... 279.7 KiB 27.3 MiB/s 00:00 [######################] 100%
device-mapper-2.... 275.6 KiB 26.9 MiB/s 00:00 [######################] 100%
python-rpds-py-0... 271.9 KiB 15.6 MiB/s 00:00 [######################] 100%
libgpg-error-1.5... 263.2 KiB 19.8 MiB/s 00:00 [######################] 100%
libbpf-1.5.0-1-x... 262.5 KiB 19.7 MiB/s 00:00 [######################] 100%
python-urllib3-1... 242.9 KiB 23.7 MiB/s 00:00 [######################] 100%
python-pycparser... 227.5 KiB 22.2 MiB/s 00:00 [######################] 100%
python-yaml-6.0.... 197.7 KiB 32.2 MiB/s 00:00 [######################] 100%
python-oauthlib-... 196.6 KiB 32.0 MiB/s 00:00 [######################] 100%
python-jsonschem... 187.6 KiB 30.5 MiB/s 00:00 [######################] 100%
python-pyserial-... 168.7 KiB 27.5 MiB/s 00:00 [######################] 100%
python-requests-... 120.8 KiB 39.3 MiB/s 00:00 [######################] 100%
expat-2.6.4-1-x86_64 114.2 KiB 27.9 MiB/s 00:00 [######################] 100%
python-attrs-23.... 103.6 KiB 33.7 MiB/s 00:00 [######################] 100%
python-idna-3.10... 101.1 KiB 16.4 MiB/s 00:00 [######################] 100%
python-charset-n... 91.9 KiB 12.8 MiB/s 00:00 [######################] 100%
libseccomp-2.5.5... 88.4 KiB 28.8 MiB/s 00:00 [######################] 100%
python-typing_ex... 76.4 KiB 24.9 MiB/s 00:00 [######################] 100%
libnghttp3-1.7.0... 72.8 KiB 7.11 MiB/s 00:00 [######################] 100%
python-configobj... 70.8 KiB 4.94 MiB/s 00:00 [######################] 100%
python-referenci... 67.9 KiB 22.1 MiB/s 00:00 [######################] 100%
mkinitcpio-39.2-... 64.2 KiB 4.82 MiB/s 00:00 [######################] 100%
perl-mailtools-2... 58.1 KiB 4.36 MiB/s 00:00 [######################] 100%
libsysprof-captu... 47.2 KiB 11.5 MiB/s 00:00 [######################] 100%
libcap-ng-0.8.5-... 41.6 KiB 13.6 MiB/s 00:00 [######################] 100%
perl-timedate-2.... 33.1 KiB 10.8 MiB/s 00:00 [######################] 100%
npth-1.8-1-x86_64 28.2 KiB 9.19 MiB/s 00:00 [######################] 100%
python-six-1.16.... 27.6 KiB 27.0 MiB/s 00:00 [######################] 100%
python-jsonpatch... 26.7 KiB 8.71 MiB/s 00:00 [######################] 100%
perl-error-0.170... 21.4 KiB 6.97 MiB/s 00:00 [######################] 100%
python-markupsaf... 21.4 KiB 5.22 MiB/s 00:00 [######################] 100%
filesystem-2024.... 14.5 KiB 4.72 MiB/s 00:00 [######################] 100%
python-jsonschem... 14.0 KiB 1405 KiB/s 00:00 [######################] 100%
python-jsonpoint... 13.6 KiB 13.3 MiB/s 00:00 [######################] 100%
python-netifaces... 13.2 KiB 12.9 MiB/s 00:00 [######################] 100%
systemd-sysvcomp... 6.1 KiB 609 KiB/s 00:00 [######################] 100%
Total (74/74) 261.7 MiB 21.9 MiB/s 00:12 [######################] 100%
(74/74) checking keys in keyring [######################] 100%
(74/74) checking package integrity [######################] 100%
(74/74) loading package files [######################] 100%
(74/74) checking for file conflicts [######################] 100%
(74/74) checking available disk space [######################] 100%
:: Running pre-transaction hooks...
(1/1) Removing linux initcpios...
:: Processing package changes...
( 1/74) upgrading iana-etc [######################] 100%
( 2/74) upgrading filesystem [######################] 100%
( 3/74) upgrading brotli [######################] 100%
( 4/74) upgrading libnghttp3 [######################] 100%
( 5/74) upgrading gcc-libs [######################] 100%
( 6/74) upgrading libgpg-error [######################] 100%
( 7/74) upgrading systemd-libs [######################] 100%
( 8/74) upgrading libcap-ng [######################] 100%
( 9/74) upgrading libldap [######################] 100%
(10/74) upgrading sqlite [######################] 100%
(11/74) upgrading util-linux-libs [######################] 100%
(12/74) upgrading audit [######################] 100%
(13/74) upgrading pam [######################] 100%
(14/74) upgrading ca-certificates-mozilla [######################] 100%
(15/74) upgrading curl [######################] 100%
(16/74) upgrading expat [######################] 100%
(17/74) installing db5.3 [######################] 100%
(18/74) installing perl [######################] 100%
(19/74) installing perl-error [######################] 100%
(20/74) installing perl-timedate [######################] 100%
(21/74) installing perl-mailtools [######################] 100%
(22/74) installing git [######################] 100%
Optional dependencies for git
tk: gitk and git gui
openssh: ssh transport and crypto [installed]
perl-libwww: git svn
perl-term-readkey: git svn and interactive.singlekey setting
perl-io-socket-ssl: git send-email TLS support
perl-authen-sasl: git send-email TLS support
perl-mediawiki-api: git mediawiki support
perl-datetime-format-iso8601: git mediawiki support
perl-lwp-protocol-https: git mediawiki https support
perl-cgi: gitweb (web interface) support
python: git svn & git p4 [installed]
subversion: git svn
org.freedesktop.secrets: keyring credential helper
libsecret: libsecret credential helper [installed]
(23/74) upgrading gnutls [######################] 100%
(24/74) upgrading npth [######################] 100%
(25/74) upgrading libsysprof-capture [######################] 100%
(26/74) upgrading glib2 [######################] 100%
(27/74) upgrading gnupg [######################] 100%
(28/74) upgrading gpgme [######################] 100%
(29/74) upgrading dbus [######################] 100%
(30/74) upgrading kbd [######################] 100%
(31/74) upgrading hwdata [######################] 100%
(32/74) upgrading libelf [######################] 100%
(33/74) upgrading libseccomp [######################] 100%
(34/74) upgrading file [######################] 100%
(35/74) upgrading util-linux [######################] 100%
(36/74) upgrading device-mapper [######################] 100%
(37/74) upgrading systemd [######################] 100%
Creating group 'git' with GID 972.
Creating user 'git' (git daemon user) with UID 972 and GID 972.
:: This is a systemd feature update. You may want to have a look at
NEWS for what changed, or if you observe unexpected behavior:
/usr/share/doc/systemd/NEWS
(38/74) upgrading libxml2 [######################] 100%
(39/74) upgrading pacman [######################] 100%
(40/74) upgrading archlinux-keyring [######################] 100%
gpg: WARNING: server 'gpg-agent' is older than us (2.4.5 < 2.4.7)
gpg: Note: Outdated servers may lack important security fixes.
gpg: Note: Use the command "gpgconf --kill all" to restart them.
==> Appending keys from archlinux.gpg...
gpg: WARNING: server 'gpg-agent' is older than us (2.4.5 < 2.4.7)
gpg: WARNING: server 'gpg-agent' is older than us (2.4.5 < 2.4.7)
gpg: WARNING: server 'gpg-agent' is older than us (2.4.5 < 2.4.7)
gpg: WARNING: server 'gpg-agent' is older than us (2.4.5 < 2.4.7)
gpg: WARNING: server 'gpg-agent' is older than us (2.4.5 < 2.4.7)
gpg: WARNING: server 'gpg-agent' is older than us (2.4.5 < 2.4.7)
==> Updating trust database...
gpg: next trustdb check due at 2025-01-01
(41/74) upgrading btrfs-progs [######################] 100%
(42/74) upgrading python [######################] 100%
(43/74) upgrading python-six [######################] 100%
(44/74) upgrading python-configobj [######################] 100%
(45/74) upgrading python-markupsafe [######################] 100%
(46/74) upgrading python-jinja [######################] 100%
(47/74) upgrading python-jsonpointer [######################] 100%
(48/74) upgrading python-jsonpatch [######################] 100%
(49/74) upgrading python-attrs [######################] 100%
(50/74) upgrading python-rpds-py [######################] 100%
(51/74) upgrading python-referencing [######################] 100%
(52/74) upgrading python-jsonschema-specifications [######################] 100%
(53/74) upgrading python-jsonschema [######################] 100%
(54/74) upgrading python-netifaces [######################] 100%
(55/74) upgrading python-pycparser [######################] 100%
(56/74) upgrading python-cffi [######################] 100%
(57/74) upgrading python-cryptography [######################] 100%
(58/74) upgrading python-oauthlib [######################] 100%
(59/74) upgrading python-pyserial [######################] 100%
(60/74) upgrading python-yaml [######################] 100%
(61/74) upgrading python-charset-normalizer [######################] 100%
(62/74) upgrading python-idna [######################] 100%
(63/74) upgrading python-urllib3 [######################] 100%
(64/74) upgrading python-requests [######################] 100%
(65/74) upgrading python-typing_extensions [######################] 100%
(66/74) upgrading sudo [######################] 100%
(67/74) upgrading libbpf [######################] 100%
(68/74) upgrading libnl [######################] 100%
(69/74) upgrading iproute2 [######################] 100%
(70/74) upgrading cloud-init [######################] 100%
(71/74) upgrading mkinitcpio [######################] 100%
New optional dependencies for mkinitcpio
systemd-ukify: alternative UKI generator
(72/74) upgrading linux [######################] 100%
New optional dependencies for linux
scx-scheds: to use sched-ext schedulers
(73/74) upgrading procps-ng [######################] 100%
(74/74) upgrading systemd-sysvcompat [######################] 100%
:: Running post-transaction hooks...
( 1/15) Creating system user accounts...
( 2/15) Updating journal message catalog...
( 3/15) Reloading system manager configuration...
( 4/15) Reloading user manager configuration...
( 5/15) Updating udev hardware database...
( 6/15) Restarting marked services...
( 7/15) Applying kernel sysctl settings...
( 8/15) Creating temporary files...
( 9/15) Reloading device manager configuration...
(10/15) Arming ConditionNeedsUpdate...
(11/15) Rebuilding certificate stores...
(12/15) Updating module dependencies...
(13/15) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux -g /boot/initramfs-linux.img
==> Starting build: '6.12.6-arch1-1'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [kms]
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
-> Early uncompressed CPIO image generation successful
==> Initcpio image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
==> Using default configuration file: '/etc/mkinitcpio.conf'
-> -k /boot/vmlinuz-linux -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: '6.12.6-arch1-1'
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [microcode]
-> Running build hook: [modconf]
-> Running build hook: [kms]
==> WARNING: Possibly missing firmware for module: 'amdgpu'
==> WARNING: Possibly missing firmware for module: 'ast'
==> WARNING: Possibly missing firmware for module: 'i915'
==> WARNING: Possibly missing firmware for module: 'nouveau'
==> WARNING: Possibly missing firmware for module: 'radeon'
==> WARNING: Possibly missing firmware for module: 'xe'
-> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci_renesas'
-> Running build hook: [keymap]
-> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'advansys'
==> WARNING: Possibly missing firmware for module: 'aic94xx'
==> WARNING: Possibly missing firmware for module: 'bfa'
==> WARNING: Possibly missing firmware for module: 'cxgb4'
==> WARNING: Possibly missing firmware for module: 'csiostor'
==> WARNING: Possibly missing firmware for module: 'cxgb3'
==> WARNING: Possibly missing firmware for module: 'isci'
==> WARNING: Possibly missing firmware for module: 'qed'
==> WARNING: Possibly missing firmware for module: 'qla1280'
==> WARNING: Possibly missing firmware for module: 'qla2xxx'
==> WARNING: Possibly missing firmware for module: 'wd719x'
==> WARNING: Possibly missing firmware for module: 'ums_eneub6250'
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
-> Early uncompressed CPIO image generation successful
==> Initcpio image generation successful
(14/15) Reloading system bus configuration...
(15/15) Warn about old perl modules
+ git clone --recursive https://git.janouch.name/p/fiv.git fiv
Cloning into 'fiv'...
remote: Enumerating objects: 2554, done.
remote: Counting objects: 100% (2411/2411), done.
remote: Compressing objects: 100% (2400/2400), done.
remote: Total 2554 (delta 1687), reused 0 (delta 0), pack-reused 143 (from 1)
Receiving objects: 100% (2554/2554), 1.52 MiB | 4.35 MiB/s, done.
Resolving deltas: 100% (1778/1778), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'submodules/liberty'
Submodule 'wuffs-mirror-release-c' (https://github.com/google/wuffs-mirror-release-c) registered for path 'submodules/wuffs-mirror-release-c'
Cloning into '/home/ci/fiv/submodules/liberty'...
remote: Enumerating objects: 789, done.
remote: Counting objects: 100% (258/258), done.
remote: Compressing objects: 100% (255/255), done.
remote: Total 789 (delta 156), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (789/789), 394.76 KiB | 7.89 MiB/s, done.
Resolving deltas: 100% (477/477), done.
Cloning into '/home/ci/fiv/submodules/wuffs-mirror-release-c'...
remote: Enumerating objects: 240, done.
remote: Counting objects: 100% (30/30), done.
remote: Compressing objects: 100% (12/12), done.
remote: Total 240 (delta 16), reused 24 (delta 13), pack-reused 210 (from 1)
Receiving objects: 100% (240/240), 3.05 MiB | 2.92 MiB/s, done.
Resolving deltas: 100% (139/139), done.
Submodule path 'submodules/liberty': checked out '0e86ffe7c30a4d52eea35856b792567ca1040f56'
Submodule path 'submodules/wuffs-mirror-release-c': checked out 'c63c4a9348fb1b52a9b60a6eb62328a97d979d9e'
+ cd fiv
+ git -c advice.detachedHead=false checkout 3bea18708fa17339136f6860ae38c9882f5b6ed5
HEAD is now at 3bea187 Bump version, update README.adoc
+ sudo pacman -S --noconfirm meson gcc pkgconf asciidoctor gtk3 libwebp lcms2 libraw libheif libtiff perl-image-exiftool
resolving dependencies...
looking for conflicting packages...
warning: dependency cycle detected:
warning: rubygems will be installed before its ruby dependency
warning: dependency cycle detected:
warning: harfbuzz will be installed before its freetype2 dependency
warning: dependency cycle detected:
warning: mesa will be installed before its libglvnd dependency
Packages (98) adobe-source-code-pro-fonts-2.042u+1.062i+1.026vf-2
adwaita-cursors-47.0-1 adwaita-icon-theme-47.0-1
adwaita-icon-theme-legacy-46.2-3 aom-3.11.0-1
at-spi2-core-2.54.0-2 avahi-1:0.8+r194+g3f79789-3
cairo-1.18.2-2 cantarell-fonts-1:0.303.1-2 dav1d-1.5.0-1
dconf-0.40.0-3 default-cursors-3-1 desktop-file-utils-0.28-1
duktape-2.7.0-7 fontconfig-2:2.15.0-2 freeglut-3.6.0-1
freetype2-2.13.3-1 fribidi-1.0.16-1 gdk-pixbuf2-2.42.12-2
giflib-5.2.2-1 glib-networking-1:2.80.0-3 glu-9.0.3-2
graphite-1:1.3.14-4 gsettings-desktop-schemas-47.1-1
gsettings-system-schemas-47.1-1 gtk-update-icon-cache-1:4.16.7-3
harfbuzz-10.1.0-1 hicolor-icon-theme-0.18-1 iso-codes-4.17.0-1
jasper-4.2.4-2 jbigkit-2.1-8 json-glib-1.10.6-1
libcloudproviders-0.3.6-1 libcolord-1.4.7-2 libcups-2:2.4.11-1
libdaemon-0.14-6 libdatrie-0.2.13-4 libde265-1.0.15-3
libdrm-2.4.124-1 libepoxy-1.5.10-3 libglvnd-1.7.0-1
libisl-0.27-1 libjpeg-turbo-3.0.4-1 libmpc-1.3.1-2
libpciaccess-0.18.1-2 libpng-1.6.44-1 libproxy-0.5.9-1
librsvg-2:2.59.2-1 libsoup3-3.6.1-1 libstemmer-2.2.0-2
libthai-0.1.29-3 libx11-1.8.10-1 libxau-1.0.12-1
libxcb-1.17.0-1 libxcomposite-0.4.6-2 libxcursor-1.2.3-1
libxdamage-1.1.6-2 libxdmcp-1.1.5-1 libxext-1.3.6-1
libxfixes-6.0.1-2 libxft-2.3.8-2 libxi-1.8.2-1
libxinerama-1.1.5-2 libxkbcommon-1.7.0-2 libxrandr-1.5.4-1
libxrender-0.9.12-1 libxshmfence-1.3.3-1 libxtst-1.2.5-1
libxxf86vm-1.1.6-1 llvm-libs-18.1.8-5
lm_sensors-1:3.6.0.r41.g31d1f125-3 mesa-1:24.3.2-1
ninja-1.12.1-2 pango-1:1.54.0-1 pixman-0.44.2-1
python-tqdm-4.67.1-2 ruby-3.3.5-2 rubygems-3.5.16-1
shared-mime-info-2.4-1 spirv-tools-2024.4.rc1-1
tinysparql-3.8.2-2 wayland-1.23.1-1 x265-4.0-1
xcb-proto-1.17.0-3 xkeyboard-config-2.43-1 xorg-xprop-1.2.8-1
xorgproto-2024.1-2 asciidoctor-2.0.23-3
gcc-14.2.1+r134+gab884fffe3fc-2 gtk3-1:3.24.43-4 lcms2-2.16-1
libheif-1.19.5-1 libraw-0.21.3-1 libtiff-4.7.0-1
libwebp-1.5.0-1 meson-1.6.1-1 perl-image-exiftool-13.10-1
pkgconf-2.3.0-1
Total Download Size: 159.79 MiB
Total Installed Size: 713.50 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
gcc-14.2.1+r134+... 51.1 MiB 22.2 MiB/s 00:02 [######################] 100%
llvm-libs-18.1.8... 33.5 MiB 24.1 MiB/s 00:01 [######################] 100%
mesa-1:24.3.2-1-... 18.9 MiB 23.7 MiB/s 00:01 [######################] 100%
gtk3-1:3.24.43-4... 8.4 MiB 23.6 MiB/s 00:00 [######################] 100%
perl-image-exift... 4.2 MiB 22.3 MiB/s 00:00 [######################] 100%
ruby-3.3.5-2-x86_64 4.0 MiB 25.3 MiB/s 00:00 [######################] 100%
iso-codes-4.17.0... 3.3 MiB 23.2 MiB/s 00:00 [######################] 100%
aom-3.11.0-1-x86_64 2.8 MiB 24.4 MiB/s 00:00 [######################] 100%
librsvg-2:2.59.2... 2.4 MiB 24.3 MiB/s 00:00 [######################] 100%
adwaita-icon-the... 2.2 MiB 16.2 MiB/s 00:00 [######################] 100%
meson-1.6.1-1-any 2.1 MiB 20.3 MiB/s 00:00 [######################] 100%
libx11-1.8.10-1-... 2.0 MiB 23.8 MiB/s 00:00 [######################] 100%
x265-4.0-1-x86_64 1786.0 KiB 22.7 MiB/s 00:00 [######################] 100%
spirv-tools-2024... 1651.2 KiB 23.0 MiB/s 00:00 [######################] 100%
harfbuzz-10.1.0-... 1090.6 KiB 18.7 MiB/s 00:00 [######################] 100%
tinysparql-3.8.2... 1062.5 KiB 17.3 MiB/s 00:00 [######################] 100%
libxcb-1.17.0-1-... 996.0 KiB 22.1 MiB/s 00:00 [######################] 100%
adobe-source-cod... 934.4 KiB 24.7 MiB/s 00:00 [######################] 100%
libisl-0.27-1-x86_64 886.4 KiB 23.4 MiB/s 00:00 [######################] 100%
xkeyboard-config... 885.4 KiB 20.1 MiB/s 00:00 [######################] 100%
gsettings-deskto... 737.7 KiB 21.8 MiB/s 00:00 [######################] 100%
shared-mime-info... 631.4 KiB 20.6 MiB/s 00:00 [######################] 100%
dav1d-1.5.0-1-x86_64 627.5 KiB 22.7 MiB/s 00:00 [######################] 100%
rubygems-3.5.16-... 620.0 KiB 22.4 MiB/s 00:00 [######################] 100%
cairo-1.18.2-2-x... 616.7 KiB 22.3 MiB/s 00:00 [######################] 100%
at-spi2-core-2.5... 568.0 KiB 24.1 MiB/s 00:00 [######################] 100%
libjpeg-turbo-3.... 547.7 KiB 23.3 MiB/s 00:00 [######################] 100%
freetype2-2.13.3... 525.7 KiB 22.3 MiB/s 00:00 [######################] 100%
libheif-1.19.5-1... 525.5 KiB 19.7 MiB/s 00:00 [######################] 100%
gdk-pixbuf2-2.42... 518.4 KiB 21.1 MiB/s 00:00 [######################] 100%
libtiff-4.7.0-1-... 496.1 KiB 24.2 MiB/s 00:00 [######################] 100%
libraw-0.21.3-1-... 447.3 KiB 21.8 MiB/s 00:00 [######################] 100%
avahi-1:0.8+r194... 426.3 KiB 20.8 MiB/s 00:00 [######################] 100%
pango-1:1.54.0-1... 414.1 KiB 25.3 MiB/s 00:00 [######################] 100%
libsoup3-3.6.1-1... 392.8 KiB 24.0 MiB/s 00:00 [######################] 100%
libwebp-1.5.0-1-... 373.0 KiB 15.2 MiB/s 00:00 [######################] 100%
asciidoctor-2.0.... 372.7 KiB 22.7 MiB/s 00:00 [######################] 100%
fontconfig-2:2.1... 370.0 KiB 21.3 MiB/s 00:00 [######################] 100%
libglvnd-1.7.0-1... 355.9 KiB 20.4 MiB/s 00:00 [######################] 100%
libdrm-2.4.124-1... 342.7 KiB 25.7 MiB/s 00:00 [######################] 100%
adwaita-cursors-... 306.9 KiB 21.4 MiB/s 00:00 [######################] 100%
libepoxy-1.5.10-... 305.3 KiB 22.9 MiB/s 00:00 [######################] 100%
libthai-0.1.29-3... 275.3 KiB 20.7 MiB/s 00:00 [######################] 100%
libcups-2:2.4.11... 271.9 KiB 19.0 MiB/s 00:00 [######################] 100%
pixman-0.44.2-1-... 270.1 KiB 20.3 MiB/s 00:00 [######################] 100%
libde265-1.0.15-... 269.5 KiB 20.2 MiB/s 00:00 [######################] 100%
libpng-1.6.44-1-... 250.5 KiB 17.5 MiB/s 00:00 [######################] 100%
xorgproto-2024.1... 241.2 KiB 23.6 MiB/s 00:00 [######################] 100%
lcms2-2.16-1-x86_64 220.1 KiB 21.5 MiB/s 00:00 [######################] 100%
libxkbcommon-1.7... 211.4 KiB 29.5 MiB/s 00:00 [######################] 100%
jasper-4.2.4-2-x... 203.0 KiB 19.8 MiB/s 00:00 [######################] 100%
adwaita-icon-the... 201.2 KiB 19.6 MiB/s 00:00 [######################] 100%
libcolord-1.4.7-... 186.8 KiB 18.2 MiB/s 00:00 [######################] 100%
duktape-2.7.0-7-... 176.2 KiB 24.6 MiB/s 00:00 [######################] 100%
json-glib-1.10.6... 172.1 KiB 24.0 MiB/s 00:00 [######################] 100%
ninja-1.12.1-2-x... 158.1 KiB 22.1 MiB/s 00:00 [######################] 100%
glu-9.0.3-2-x86_64 152.2 KiB 24.8 MiB/s 00:00 [######################] 100%
libxi-1.8.2-1-x86_64 150.5 KiB 24.5 MiB/s 00:00 [######################] 100%
libstemmer-2.2.0... 147.2 KiB 20.5 MiB/s 00:00 [######################] 100%
wayland-1.23.1-1... 140.4 KiB 19.6 MiB/s 00:00 [######################] 100%
glib-networking-... 138.1 KiB 19.3 MiB/s 00:00 [######################] 100%
lm_sensors-1:3.6... 130.6 KiB 21.3 MiB/s 00:00 [######################] 100%
xcb-proto-1.17.0... 128.5 KiB 41.8 MiB/s 00:00 [######################] 100%
python-tqdm-4.67... 128.3 KiB 17.9 MiB/s 00:00 [######################] 100%
libdatrie-0.2.13... 114.2 KiB 15.9 MiB/s 00:00 [######################] 100%
cantarell-fonts-... 112.4 KiB 18.3 MiB/s 00:00 [######################] 100%
libxext-1.3.6-1-... 106.0 KiB 10.4 MiB/s 00:00 [######################] 100%
dconf-0.40.0-3-x... 105.4 KiB 7.92 MiB/s 00:00 [######################] 100%
freeglut-3.6.0-1... 100.8 KiB 14.1 MiB/s 00:00 [######################] 100%
libmpc-1.3.1-2-x... 85.2 KiB 11.9 MiB/s 00:00 [######################] 100%
graphite-1:1.3.1... 83.5 KiB 11.6 MiB/s 00:00 [######################] 100%
giflib-5.2.2-1-x... 76.3 KiB 10.7 MiB/s 00:00 [######################] 100%
fribidi-1.0.16-1... 71.3 KiB 23.2 MiB/s 00:00 [######################] 100%
libcloudprovider... 63.8 KiB 10.4 MiB/s 00:00 [######################] 100%
pkgconf-2.3.0-1-... 61.8 KiB 20.1 MiB/s 00:00 [######################] 100%
libxft-2.3.8-2-x... 60.1 KiB 9.78 MiB/s 00:00 [######################] 100%
jbigkit-2.1-8-x86_64 52.2 KiB 17.0 MiB/s 00:00 [######################] 100%
desktop-file-uti... 42.5 KiB 10.4 MiB/s 00:00 [######################] 100%
libxcursor-1.2.3... 33.0 KiB 10.7 MiB/s 00:00 [######################] 100%
libproxy-0.5.9-1... 29.5 KiB 9.60 MiB/s 00:00 [######################] 100%
libxrender-0.9.1... 29.4 KiB 2.21 MiB/s 00:00 [######################] 100%
libxtst-1.2.5-1-... 29.0 KiB 4.04 MiB/s 00:00 [######################] 100%
libxrandr-1.5.4-... 27.3 KiB 8.87 MiB/s 00:00 [######################] 100%
libxdmcp-1.1.5-1... 27.1 KiB 6.61 MiB/s 00:00 [######################] 100%
xorg-xprop-1.2.8... 25.8 KiB 8.39 MiB/s 00:00 [######################] 100%
libpciaccess-0.1... 21.5 KiB 5.26 MiB/s 00:00 [######################] 100%
libdaemon-0.14-6... 19.2 KiB 3.12 MiB/s 00:00 [######################] 100%
gtk-update-icon-... 17.8 KiB 1269 KiB/s 00:00 [######################] 100%
libxxf86vm-1.1.6... 15.5 KiB 1548 KiB/s 00:00 [######################] 100%
libxfixes-6.0.1-... 13.6 KiB 4.43 MiB/s 00:00 [######################] 100%
hicolor-icon-the... 13.0 KiB 3.18 MiB/s 00:00 [######################] 100%
libxcomposite-0.... 11.6 KiB 3.76 MiB/s 00:00 [######################] 100%
libxau-1.0.12-1-... 11.4 KiB 1136 KiB/s 00:00 [######################] 100%
libxinerama-1.1.... 9.8 KiB 3.20 MiB/s 00:00 [######################] 100%
libxdamage-1.1.6... 7.1 KiB 6.97 MiB/s 00:00 [######################] 100%
libxshmfence-1.3... 6.0 KiB 597 KiB/s 00:00 [######################] 100%
gsettings-system... 5.9 KiB 5.80 MiB/s 00:00 [######################] 100%
default-cursors-... 2.3 KiB 579 KiB/s 00:00 [######################] 100%
Total (98/98) 159.8 MiB 21.5 MiB/s 00:07 [######################] 100%
(98/98) checking keys in keyring [######################] 100%
(98/98) checking package integrity [######################] 100%
(98/98) loading package files [######################] 100%
(98/98) checking for file conflicts [######################] 100%
(98/98) checking available disk space [######################] 100%
:: Processing package changes...
( 1/98) installing ninja [######################] 100%
( 2/98) installing python-tqdm [######################] 100%
Optional dependencies for python-tqdm
python-requests: telegram [installed]
( 3/98) installing meson [######################] 100%
( 4/98) installing libmpc [######################] 100%
( 5/98) installing libisl [######################] 100%
( 6/98) installing gcc [######################] 100%
Optional dependencies for gcc
lib32-gcc-libs: for generating code for 32-bit ABI
( 7/98) installing pkgconf [######################] 100%
( 8/98) installing rubygems [######################] 100%
( 9/98) installing ruby [######################] 100%
Optional dependencies for ruby
tk: for Ruby/TK
ruby-docs: Documentation for Ruby
ruby-default-gems: Default gems which are part of Ruby StdLib
ruby-bundled-gems: Bundled gems which are part of Ruby StdLib
ruby-stdlib: Full Ruby StdLib including default gems, bundled gems and tools
(10/98) installing asciidoctor [######################] 100%
(11/98) installing hicolor-icon-theme [######################] 100%
(12/98) installing adwaita-icon-theme-legacy [######################] 100%
(13/98) installing adwaita-cursors [######################] 100%
(14/98) installing adwaita-icon-theme [######################] 100%
(15/98) installing dconf [######################] 100%
(16/98) installing gsettings-system-schemas [######################] 100%
(17/98) installing adobe-source-code-pro-fonts [######################] 100%
(18/98) installing cantarell-fonts [######################] 100%
(19/98) installing gsettings-desktop-schemas [######################] 100%
(20/98) installing xcb-proto [######################] 100%
(21/98) installing xorgproto [######################] 100%
(22/98) installing libxdmcp [######################] 100%
(23/98) installing libxau [######################] 100%
(24/98) installing libxcb [######################] 100%
(25/98) installing libx11 [######################] 100%
(26/98) installing libxext [######################] 100%
(27/98) installing libxfixes [######################] 100%
(28/98) installing libxi [######################] 100%
(29/98) installing libxtst [######################] 100%
(30/98) installing xorg-xprop [######################] 100%
(31/98) installing at-spi2-core [######################] 100%
(32/98) installing libpng [######################] 100%
(33/98) installing graphite [######################] 100%
Optional dependencies for graphite
graphite-docs: Documentation
(34/98) installing harfbuzz [######################] 100%
Optional dependencies for harfbuzz
harfbuzz-utils: utilities
(35/98) installing freetype2 [######################] 100%
(36/98) installing fontconfig [######################] 100%
Creating fontconfig configuration...
Rebuilding fontconfig cache...
(37/98) installing libxrender [######################] 100%
(38/98) installing pixman [######################] 100%
(39/98) installing cairo [######################] 100%
(40/98) installing desktop-file-utils [######################] 100%
(41/98) installing fribidi [######################] 100%
(42/98) installing libjpeg-turbo [######################] 100%
Optional dependencies for libjpeg-turbo
java-runtime>11: for TurboJPEG Java wrapper
(43/98) installing jbigkit [######################] 100%
(44/98) installing libtiff [######################] 100%
Optional dependencies for libtiff
freeglut: for using tiffgt [pending]
(45/98) installing shared-mime-info [######################] 100%
(46/98) installing gdk-pixbuf2 [######################] 100%
Optional dependencies for gdk-pixbuf2
libwmf: Load .wmf and .apm
libopenraw: Load .dng, .cr2, .crw, .nef, .orf, .pef, .arw, .erf, .mrw, and
.raf
libavif: Load .avif
libheif: Load .heif, .heic, and .avif [pending]
libjxl: Load .jxl
librsvg: Load .svg, .svgz, and .svg.gz [pending]
webp-pixbuf-loader: Load .webp
(47/98) installing iso-codes [######################] 100%
(48/98) installing libcloudproviders [######################] 100%
(49/98) installing lcms2 [######################] 100%
(50/98) installing libcolord [######################] 100%
(51/98) installing libdaemon [######################] 100%
(52/98) installing avahi [######################] 100%
Optional dependencies for avahi
gtk3: avahi-discover, avahi-discover-standalone, bshell, bssh, bvnc
[pending]
libevent: libevent bindings [installed]
nss-mdns: NSS support for mDNS
python-dbus: avahi-bookmarks, avahi-discover
python-gobject: avahi-bookmarks, avahi-discover
python-twisted: avahi-bookmarks
qt5-base: qt5 bindings
(53/98) installing libcups [######################] 100%
(54/98) installing libpciaccess [######################] 100%
(55/98) installing libdrm [######################] 100%
Optional dependencies for libdrm
cairo: needed for modetest tool [installed]
(56/98) installing libxshmfence [######################] 100%
(57/98) installing libxxf86vm [######################] 100%
(58/98) installing llvm-libs [######################] 100%
(59/98) installing lm_sensors [######################] 100%
Optional dependencies for lm_sensors
rrdtool: for logging with sensord
perl: for sensor detection and configuration convert [installed]
(60/98) installing spirv-tools [######################] 100%
(61/98) installing default-cursors [######################] 100%
Optional dependencies for default-cursors
adwaita-cursors: default cursor theme [installed]
(62/98) installing wayland [######################] 100%
(63/98) installing mesa [######################] 100%
Optional dependencies for mesa
opengl-man-pages: for the OpenGL API man pages
(64/98) installing libglvnd [######################] 100%
(65/98) installing libepoxy [######################] 100%
(66/98) installing dav1d [######################] 100%
Optional dependencies for dav1d
dav1d-doc: HTML documentation
(67/98) installing libdatrie [######################] 100%
(68/98) installing libthai [######################] 100%
(69/98) installing libxft [######################] 100%
(70/98) installing pango [######################] 100%
(71/98) installing librsvg [######################] 100%
(72/98) installing libxcomposite [######################] 100%
(73/98) installing libxcursor [######################] 100%
(74/98) installing libxdamage [######################] 100%
(75/98) installing libxinerama [######################] 100%
(76/98) installing xkeyboard-config [######################] 100%
(77/98) installing libxkbcommon [######################] 100%
Optional dependencies for libxkbcommon
libxkbcommon-x11: xkbcli interactive-x11
wayland: xkbcli interactive-wayland [installed]
(78/98) installing libxrandr [######################] 100%
(79/98) installing json-glib [######################] 100%
(80/98) installing duktape [######################] 100%
(81/98) installing libproxy [######################] 100%
(82/98) installing glib-networking [######################] 100%
(83/98) installing libsoup3 [######################] 100%
Optional dependencies for libsoup3
samba: Windows Domain SSO
(84/98) installing libstemmer [######################] 100%
(85/98) installing tinysparql [######################] 100%
(86/98) installing gtk-update-icon-cache [######################] 100%
(87/98) installing gtk3 [######################] 100%
Optional dependencies for gtk3
evince: Default print preview command
(88/98) installing giflib [######################] 100%
(89/98) installing libwebp [######################] 100%
(90/98) installing freeglut [######################] 100%
(91/98) installing glu [######################] 100%
(92/98) installing jasper [######################] 100%
Optional dependencies for jasper
jasper-doc: documentation
(93/98) installing libraw [######################] 100%
(94/98) installing aom [######################] 100%
(95/98) installing libde265 [######################] 100%
Optional dependencies for libde265
ffmpeg: for sherlock265
qt5-base: for sherlock265
sdl: dec265 YUV overlay output
(96/98) installing x265 [######################] 100%
(97/98) installing libheif [######################] 100%
Optional dependencies for libheif
libjpeg-turbo: for heif-convert and heif-enc [installed]
libpng: for heif-convert and heif-enc [installed]
dav1d: dav1d encoder [installed]
ffmpeg: hardware decode
rav1e: rav1e encoder
svt-av1: svt-av1 encoder
(98/98) installing perl-image-exiftool [######################] 100%
Optional dependencies for perl-image-exiftool
perl-archive-zip: Support for zip files, including epub
perl-io-compress-brotli: Support for brotli-compressed metadata
:: Running post-transaction hooks...
( 1/15) Creating system user accounts...
Creating group 'avahi' with GID 971.
Creating user 'avahi' (Avahi mDNS/DNS-SD daemon) with UID 971 and GID 971.
( 2/15) Reloading system manager configuration...
( 3/15) Reloading user manager configuration...
( 4/15) Arming ConditionNeedsUpdate...
( 5/15) Updating the MIME type database...
( 6/15) Updating fontconfig configuration...
( 7/15) Reloading system bus configuration...
( 8/15) Warn about old perl modules
( 9/15) Updating fontconfig cache...
(10/15) Probing GDK-Pixbuf loader modules...
(11/15) Updating GIO module cache...
(12/15) Compiling GSettings XML schema files...
(13/15) Probing GTK3 input method modules...
(14/15) Updating icon theme caches...
(15/15) Updating the desktop file MIME type cache...
+ meson setup build
The Meson build system
Version: 1.6.1
Source dir: /home/ci/fiv
Build dir: /home/ci/fiv/build
Build type: native build
Project name: fiv
Project version: 1.0.0
C compiler for the host machine: cc (gcc 14.2.1 "cc (GCC) 14.2.1 20240910")
C linker for the host machine: cc ld.bfd 2.43.0
Host machine cpu family: x86_64
Host machine cpu: x86_64
Compiler for C supports arguments -Wno-cast-function-type: YES
Found pkg-config: YES (/usr/bin/pkg-config) 2.3.0
Did not find CMake 'cmake'
Found CMake: NO
Run-time dependency libjpegqs found: NO (tried pkgconfig and cmake)
Looking for a fallback subproject for the dependency libjpegqs
Downloading libjpegqs source from https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: CA cert does not include key usage extension (_ssl.c:1018)>
WARNING: failed to download with error: could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz is the internet available?. Trying after a delay...
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: CA cert does not include key usage extension (_ssl.c:1018)>
WARNING: failed to download with error: could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz is the internet available?. Trying after a delay...
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: CA cert does not include key usage extension (_ssl.c:1018)>
WARNING: failed to download with error: could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz is the internet available?. Trying after a delay...
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: CA cert does not include key usage extension (_ssl.c:1018)>
WARNING: failed to download with error: could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz is the internet available?. Trying after a delay...
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: CA cert does not include key usage extension (_ssl.c:1018)>
WARNING: failed to download with error: could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz is the internet available?. Trying after a delay...
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: CA cert does not include key usage extension (_ssl.c:1018)>
A fallback URL could be specified using source_fallback_url key in the wrap file
could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz is the internet available?
Subproject libjpegqs is buildable: NO (disabling)
Dependency libjpegqs from subproject libjpegqs found: NO (subproject failed to configure)
Run-time dependency lcms2 found: YES 2.16
Run-time dependency libraw found: YES 0.21.3
Run-time dependency librsvg-2.0 found: YES 2.59.2
Run-time dependency xcursor found: YES 1.2.3
Run-time dependency libheif found: YES 1.19.5
Run-time dependency libtiff-4 found: YES 4.7.0
Run-time dependency gdk-pixbuf-2.0 found: YES 2.42.12
Run-time dependency gtk+-3.0 found: YES 3.24.43
Run-time dependency pixman-1 found: YES 0.44.2
Run-time dependency epoxy found: YES 1.5.10
Run-time dependency libjpeg found: YES 3.0.4
Run-time dependency libturbojpeg found: YES 3.0.4
Run-time dependency libwebp found: YES 1.5.0
Run-time dependency libwebpdemux found: YES 1.5.0
Run-time dependency libwebpdecoder found: YES 1.5.0
Run-time dependency libwebpmux found: YES 1.5.0
Library m found: YES
Run-time dependency lcms2_fast_float found: NO (tried pkgconfig and cmake)
Library lcms2_fast_float found: NO
Configuring config.h.in using configuration
Build-time dependency gio-2.0 found: YES 2.82.4
Program /usr/bin/glib-compile-resources found: YES (/usr/bin/glib-compile-resources)
Dependency gtk+-3.0 found: YES 3.24.43 (cached)
Dependency libturbojpeg found: YES 3.0.4 (cached)
Dependency gio-2.0 found: YES 2.82.4 (cached)
Program /usr/bin/glib-compile-schemas found: YES (/usr/bin/glib-compile-schemas)
Dependency gio-2.0 found: YES 2.82.4 (cached)
Program /usr/bin/glib-compile-schemas found: YES (/usr/bin/glib-compile-schemas)
Program gtk4-update-icon-cache found: YES (/usr/bin/gtk4-update-icon-cache)
Program sed found: YES (/usr/bin/sed)
Program xmlwf found: YES (/usr/bin/xmlwf)
Program xmllint found: YES (/usr/bin/xmllint)
Program desktop-file-validate found: YES (/usr/bin/desktop-file-validate)
Program asciidoctor found: YES (/usr/bin/asciidoctor)
Program a2x found: NO
Configuring name.janouch.fiv-reverse-search-google.desktop using configuration
Configuring name.janouch.fiv-reverse-search-bing.desktop using configuration
Configuring name.janouch.fiv-reverse-search-yandex.desktop using configuration
Configuring name.janouch.fiv-reverse-search-tineye.desktop using configuration
Configuring name.janouch.fiv-reverse-search-saucenao.desktop using configuration
Configuring name.janouch.fiv-reverse-search-iqdb.desktop using configuration
Configuring fiv-update-desktop-files using configuration
Configuring meta using configuration
Build targets in project: 11
fiv 1.0.0
Subprojects
libjpegqs: NO
could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz is the internet available?
Found ninja-1.12.1 at /usr/bin/ninja
+ meson compile -C build
INFO: autodetecting backend as ninja
INFO: calculating backend command to run: /usr/bin/ninja -C /home/ci/fiv/build
ninja: Entering directory `/home/ci/fiv/build'
[1/22] Generating resources_h with a custom command
[2/22] Generating resources_c with a custom command
[3/22] Compiling gschemas gsettings-compile
[4/22] Generating config.h with a custom command
[5/22] Generating tiff-tables.h with a custom command (wrapped by meson to capture output)
[6/22] Generating manpage for fiv with a custom command
[7/22] Compiling C object fiv.p/meson-generated_.._resources.c.o
[8/22] Compiling C object libfiv-io.a.p/fiv-io-cmm.c.o
[9/22] Compiling C object libfiv-io.a.p/xdg.c.o
[10/22] Compiling C object fiv.p/fiv.c.o
[11/22] Compiling C object fiv.p/fiv-view.c.o
[12/22] Compiling C object fiv.p/fiv-context-menu.c.o
[13/22] Compiling C object fiv.p/fiv-browser.c.o
[14/22] Compiling C object fiv.p/fiv-sidebar.c.o
[15/22] Compiling C object fiv.p/fiv-thumbnail.c.o
[16/22] Compiling C object fiv.p/fiv-collection.c.o
[17/22] Compiling C object fiv.p/fiv-io-model.c.o
[18/22] Compiling C object fiv-jpegcrop.p/fiv-jpegcrop.c.o
[19/22] Linking target fiv-jpegcrop
[20/22] Compiling C object libfiv-io.a.p/fiv-io.c.o
In file included from ../fiv-io.c:53:
/usr/lib/pkgconfig/../../include/librsvg-2.0/librsvg/rsvg.h:1331:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
1331 | #if LIBRSVG_CHECK_FEATURE(PIXBUF)
| ^~~~~~~~~~~~~~~~~~~
In file included from ../fiv-io.c:85:
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function ‘wuffs_adler32__hasher__alloc’:
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:22281:46: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
22281 | (wuffs_adler32__hasher*)(calloc(sizeof(wuffs_adler32__hasher), 1));
| ^~~~~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:22281:46: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function ‘wuffs_bmp__decoder__alloc’:
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:22806:43: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
22806 | (wuffs_bmp__decoder*)(calloc(sizeof(wuffs_bmp__decoder), 1));
| ^~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:22806:43: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function ‘wuffs_crc32__ieee_hasher__alloc’:
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:28323:49: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
28323 | (wuffs_crc32__ieee_hasher*)(calloc(sizeof(wuffs_crc32__ieee_hasher), 1));
| ^~~~~~~~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:28323:49: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function ‘wuffs_deflate__decoder__alloc’:
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:29028:47: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
29028 | (wuffs_deflate__decoder*)(calloc(sizeof(wuffs_deflate__decoder), 1));
| ^~~~~~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:29028:47: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function ‘wuffs_lzw__decoder__alloc’:
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:31216:43: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
31216 | (wuffs_lzw__decoder*)(calloc(sizeof(wuffs_lzw__decoder), 1));
| ^~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:31216:43: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function ‘wuffs_gif__decoder__alloc’:
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:31914:43: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
31914 | (wuffs_gif__decoder*)(calloc(sizeof(wuffs_gif__decoder), 1));
| ^~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:31914:43: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function ‘wuffs_zlib__decoder__alloc’:
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:38328:44: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
38328 | (wuffs_zlib__decoder*)(calloc(sizeof(wuffs_zlib__decoder), 1));
| ^~~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:38328:44: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function ‘wuffs_png__decoder__alloc’:
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:39193:43: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
39193 | (wuffs_png__decoder*)(calloc(sizeof(wuffs_png__decoder), 1));
| ^~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:39193:43: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function ‘wuffs_tga__decoder__alloc’:
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:45271:43: warning: ‘calloc’ sizes specified with ‘sizeof’ in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
45271 | (wuffs_tga__decoder*)(calloc(sizeof(wuffs_tga__decoder), 1));
| ^~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:45271:43: note: earlier argument should specify number of elements, later size of each element
[21/22] Linking static target libfiv-io.a
[22/22] Linking target fiv
+ meson test -C build
ninja: Entering directory `/home/ci/fiv/build'
[1/12] Generating config.h with a custom command
1/37 xmlwf fiv.svg OK 0.02s
2/37 xmllint fiv.svg OK 0.02s
3/37 xmlwf fiv.manifest OK 0.02s
4/37 xmllint fiv.manifest OK 0.02s
5/37 xmlwf resources/resources.gresource.xml OK 0.02s
6/37 xmllint resources/resources.gresource.xml OK 0.02s
7/37 xmlwf fiv.gschema.xml OK 0.02s
8/37 xmllint fiv.gschema.xml OK 0.02s
9/37 xmlwf resources/text-symbolic.svg OK 0.02s
10/37 xmllint resources/text-symbolic.svg OK 0.02s
11/37 xmlwf resources/circle-filled-symbolic.svg OK 0.02s
12/37 xmllint resources/circle-filled-symbolic.svg OK 0.02s
13/37 xmlwf resources/cross-large-symbolic.svg OK 0.02s
14/37 xmllint resources/cross-large-symbolic.svg OK 0.02s
15/37 xmlwf resources/funnel-symbolic.svg OK 0.02s
16/37 xmllint resources/funnel-symbolic.svg OK 0.02s
17/37 xmlwf resources/blend-tool-symbolic.svg OK 0.02s
18/37 xmllint resources/blend-tool-symbolic.svg OK 0.02s
19/37 xmlwf resources/checkerboard-symbolic.svg OK 0.02s
20/37 xmllint resources/checkerboard-symbolic.svg OK 0.02s
21/37 xmlwf resources/heal-symbolic.svg OK 0.02s
22/37 xmllint resources/heal-symbolic.svg OK 0.02s
23/37 xmlwf resources/info-symbolic.svg OK 0.02s
24/37 xmllint resources/info-symbolic.svg OK 0.02s
25/37 xmlwf resources/pin2-symbolic.svg OK 0.02s
26/37 xmllint resources/pin2-symbolic.svg OK 0.02s
27/37 xmlwf resources/shapes-symbolic.svg OK 0.02s
28/37 xmllint resources/shapes-symbolic.svg OK 0.02s
29/37 fiv.desktop OK 0.02s
30/37 fiv-browse.desktop OK 0.02s
31/37 fiv-jpegcrop.desktop OK 0.02s
32/37 fiv-reverse-search-google.desktop OK 0.02s
33/37 fiv-reverse-search-bing.desktop OK 0.02s
34/37 fiv-reverse-search-yandex.desktop OK 0.02s
35/37 fiv-reverse-search-tineye.desktop OK 0.02s
36/37 fiv-reverse-search-saucenao.desktop OK 0.02s
37/37 fiv-reverse-search-iqdb.desktop OK 0.02s
Ok: 37
Expected Fail: 0
Fail: 0
Unexpected Pass: 0
Skipped: 0
Timeout: 0
Full log written to /home/ci/fiv/build/meson-logs/testlog.txt