- Project
- p/json-rpc-shell
- Commit
- 74fcb0682886c8fbf4ba82a76d7c5de15f167340
- Runner
- Alpine 3.20
- State
- Success
- Notified
- 1
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.20.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.6.34-1-virt (buildozer@build-3-20-x86_64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #2-Alpine SMP PREEMPT_DYNAMIC Tue, 18 Jun 2024 10:38:37 +0000
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1561496902 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000008] tsc: Detected 1696.073 MHz processor
[ 0.001162] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001210] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001214] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001536] RAMDISK: [mem 0x7f6be000-0x7ffd9fff]
[ 0.001540] ACPI: Early table checksum verification disabled
[ 0.001545] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[ 0.001552] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001562] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001571] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001577] ACPI: FACS 0x000000007FFE0000 000040
[ 0.001583] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001589] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001595] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001599] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[ 0.001602] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[ 0.001603] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.001604] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[ 0.001606] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[ 0.001607] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[ 0.002100] Zone ranges:
[ 0.002102] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.002105] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.002107] Normal empty
[ 0.002109] Movable zone start for each node
[ 0.002110] Early memory node ranges
[ 0.002111] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.002113] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.002115] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.002513] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002542] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.012502] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.013233] ACPI: PM-Timer IO Port: 0x608
[ 0.013255] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.013321] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.013327] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013331] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.013333] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013335] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.013336] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.013344] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013346] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013353] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.013378] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.013402] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.013404] Booting paravirtualized kernel on KVM
[ 0.013406] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.020935] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.021555] percpu: Embedded 57 pages/cpu s195560 r8192 d29720 u1048576
[ 0.021603] kvm-guest: PV spinlocks disabled, no host support
[ 0.021604] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.021682] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.022273] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.022748] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.022850] Built 1 zonelists, mobility grouping on. Total pages: 515802
[ 0.023493] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.030130] Memory: 2012824K/2096608K available (14336K kernel code, 1799K rwdata, 8232K rodata, 2696K init, 2032K bss, 83524K reserved, 0K cma-reserved)
[ 0.041046] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.041197] Kernel/User page tables isolation: enabled
[ 0.042432] Dynamic Preempt: none
[ 0.042574] rcu: Preemptible hierarchical RCU implementation.
[ 0.042575] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.042577] Trampoline variant of Tasks RCU enabled.
[ 0.042578] Tracing variant of Tasks RCU enabled.
[ 0.042579] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.042580] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.047614] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.047858] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.048056] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.056850] Console: colour VGA+ 80x25
[ 0.056916] printk: console [ttyS0] enabled
[ 0.221551] ACPI: Core revision 20230628
[ 0.223280] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.226011] APIC: Switch to symmetric I/O mode setup
[ 0.227866] x2apic enabled
[ 0.229213] APIC: Switched APIC routing to: physical x2apic
[ 0.232781] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.234549] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.237606] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960730)
[ 0.240086] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.241576] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.243229] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.245599] Spectre V2 : Mitigation: Retpolines
[ 0.247606] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.249890] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.251582] Speculative Store Bypass: Vulnerable
[ 0.252723] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.254330] MMIO Stale Data: Unknown: No mitigations
[ 0.255552] x86/fpu: x87 FPU will use FXSAVE
[ 0.279814] Freeing SMP alternatives memory: 32K
[ 0.281023] pid_max: default: 32768 minimum: 301
[ 0.283108] LSM: initializing lsm=lockdown,capability,landlock,integrity
[ 0.286333] landlock: Up and running.
[ 0.287531] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.287610] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.412413] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.415083] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.416853] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.417601] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.417601] signal: max sigframe size: 1440
[ 0.417601] rcu: Hierarchical SRCU implementation.
[ 0.417605] rcu: Max phase no-delay instances is 1000.
[ 0.419304] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.420874] smp: Bringing up secondary CPUs ...
[ 0.422281] smpboot: x86: Booting SMP configuration:
[ 0.423514] .... node #0, CPUs: #1
[ 0.437645] smp: Brought up 1 node, 2 CPUs
[ 0.439674] smpboot: Max logical packages: 1
[ 0.440732] ----------------
[ 0.441451] | NMI testsuite:
[ 0.442188] --------------------
[ 0.443050] remote IPI: ok |
[ 0.443085] local IPI: ok |
[ 0.443085] --------------------
[ 0.443085] Good, all 2 testcases passed! |
[ 0.443085] ---------------------------------
[ 0.447610] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.449917] devtmpfs: initialized
[ 0.449917] x86/mm: Memory block size: 128MB
[ 0.450346] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.450458] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.459467] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.461339] audit: initializing netlink subsys (disabled)
[ 0.462958] audit: type=2000 audit(1735179390.504:1): state=initialized audit_enabled=0 res=1
[ 0.462958] thermal_sys: Registered thermal governor 'step_wise'
[ 0.462958] cpuidle: using governor ladder
[ 0.468783] cpuidle: using governor menu
[ 0.470023] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.472229] PCI: Using configuration type 1 for base access
[ 0.474401] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.477837] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.480228] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.483612] ACPI: Added _OSI(Module Device)
[ 0.484849] ACPI: Added _OSI(Processor Device)
[ 0.486108] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.487618] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.489969] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.493150] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.494992] ACPI: Interpreter enabled
[ 0.496048] ACPI: PM: (supports S0 S3 S5)
[ 0.497608] ACPI: Using IOAPIC for interrupt routing
[ 0.499053] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.501604] PCI: Using E820 reservations for host bridge windows
[ 0.503453] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.508612] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.510383] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.512542] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.515323] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.518175] acpiphp: Slot [3] registered
[ 0.519323] acpiphp: Slot [4] registered
[ 0.520461] acpiphp: Slot [5] registered
[ 0.521608] acpiphp: Slot [6] registered
[ 0.522866] acpiphp: Slot [7] registered
[ 0.524144] acpiphp: Slot [8] registered
[ 0.525554] acpiphp: Slot [9] registered
[ 0.527649] acpiphp: Slot [10] registered
[ 0.529138] acpiphp: Slot [11] registered
[ 0.530359] acpiphp: Slot [12] registered
[ 0.531525] acpiphp: Slot [13] registered
[ 0.532938] acpiphp: Slot [14] registered
[ 0.534404] acpiphp: Slot [15] registered
[ 0.535877] acpiphp: Slot [16] registered
[ 0.537295] acpiphp: Slot [17] registered
[ 0.537667] acpiphp: Slot [18] registered
[ 0.539144] acpiphp: Slot [19] registered
[ 0.540569] acpiphp: Slot [20] registered
[ 0.542053] acpiphp: Slot [21] registered
[ 0.543612] acpiphp: Slot [22] registered
[ 0.545078] acpiphp: Slot [23] registered
[ 0.547657] acpiphp: Slot [24] registered
[ 0.548916] acpiphp: Slot [25] registered
[ 0.550305] acpiphp: Slot [26] registered
[ 0.551786] acpiphp: Slot [27] registered
[ 0.553397] acpiphp: Slot [28] registered
[ 0.554934] acpiphp: Slot [29] registered
[ 0.556326] acpiphp: Slot [30] registered
[ 0.557643] acpiphp: Slot [31] registered
[ 0.558847] PCI host bridge to bus 0000:00
[ 0.560141] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.562494] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.564908] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.567616] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.570262] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.572985] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.574991] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.578155] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.581446] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.586979] pci 0000:00:01.1: reg 0x20: [io 0xc120-0xc12f]
[ 0.589347] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.591372] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.594144] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.596354] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.597942] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.600196] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.602160] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.604528] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.611050] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.616466] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 0.627709] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.630456] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.634071] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.637611] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc11f]
[ 0.640640] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 0.649345] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.652461] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.656000] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.660107] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.663622] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 0.671984] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.680721] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.687612] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0ff]
[ 0.690981] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[ 0.698448] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.706617] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.707815] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.710077] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.712404] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.714994] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.718158] iommu: Default domain type: Translated
[ 0.719855] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.722281] SCSI subsystem initialized
[ 0.723657] pps_core: LinuxPPS API ver. 1 registered
[ 0.723657] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.727614] PTP clock support registered
[ 0.728776] PCI: Using ACPI for IRQ routing
[ 0.729596] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.729596] clocksource: Switched to clocksource kvm-clock
[ 0.731152] VFS: Disk quotas dquot_6.6.0
[ 0.732006] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.733860] pnp: PnP ACPI init
[ 0.735143] pnp: PnP ACPI: found 6 devices
[ 0.746050] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.748764] NET: Registered PF_INET protocol family
[ 0.750670] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.754101] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.756579] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.758765] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.760848] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.762775] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.764594] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.766521] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.768486] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.771284] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.772750] NET: Registered PF_XDP protocol family
[ 0.773966] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.775497] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.777165] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.779083] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.781040] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.783098] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.784759] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.786577] PCI: CLS 0 bytes, default 64
[ 0.787793] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.787945] Unpacking initramfs...
[ 0.791421] Initialise system trusted keyrings
[ 0.794227] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.796480] zbud: loaded
[ 0.798022] Key type asymmetric registered
[ 0.799472] Asymmetric key parser 'x509' registered
[ 0.801230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.803852] io scheduler mq-deadline registered
[ 0.805386] io scheduler kyber registered
[ 0.806953] io scheduler bfq registered
[ 0.820398] ERST DBG: ERST support is disabled.
[ 0.858057] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.885415] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.923036] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.929833] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.932331] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.936024] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.939225] scsi host0: ata_piix
[ 0.940801] scsi host1: ata_piix
[ 0.942029] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 0.944408] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 0.946971] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.950555] Freeing initrd memory: 9328K
[ 0.951798] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.953751] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.955593] rtc_cmos 00:05: RTC can wake from S4
[ 0.958158] rtc_cmos 00:05: registered as rtc0
[ 0.959866] rtc_cmos 00:05: setting system clock to 2024-12-26T02:16:30 UTC (1735179390)
[ 0.962889] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.965510] intel_pstate: CPU model not supported
[ 0.967376] gre: GRE over IPv4 demultiplexor driver
[ 0.984155] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.988732] NET: Registered PF_INET6 protocol family
[ 0.991003] Segment Routing with IPv6
[ 0.992082] In-situ OAM (IOAM) with IPv6
[ 0.993358] Key type dns_resolver registered
[ 0.994950] IPI shorthand broadcast: enabled
[ 0.998800] sched_clock: Marking stable (823601724, 169732654)->(1002870799, -9536421)
[ 1.004805] registered taskstats version 1
[ 1.006196] Loading compiled-in X.509 certificates
[ 1.015362] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 1.020421] Key type .fscrypt registered
[ 1.021538] Key type fscrypt-provisioning registered
[ 1.110886] ata2: found unknown device (class 0)
[ 1.114202] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.119686] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.162349] Freeing unused kernel image (initmem) memory: 2696K
[ 1.164122] Write protecting the kernel read-only data: 24576k
[ 1.166507] Freeing unused kernel image (rodata/data gap) memory: 2008K
[ 1.168396] rodata_test: all tests were successful
[ 1.169712] Run /init as init process
[ 1.185372] Alpine Init 3.10.1-r0
Alpine Init 3.10.1-r0
[ 1.187635] Loading boot drivers...
* Loading boot drivers: [ 1.260253] ACPI: bus type USB registered
[ 1.261293] usbcore: registered new interface driver usbfs
[ 1.262594] usbcore: registered new interface driver hub
[ 1.263866] usbcore: registered new device driver usb
[ 1.271537] usbcore: registered new interface driver usb-storage
[ 1.490816] loop: module loaded
[ 1.538635] ACPI: bus type drm_connector registered
[ 1.583564] Loading boot drivers: ok.
ok.
[ 1.587057] Mounting root...
* Mounting root: [ 1.630894] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.657509] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.658689] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.662917] [drm] Found EDID data blob.
[ 1.663957] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 1.680889] Console: switching to colour frame buffer device 160x50
[ 1.684136] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.820970] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.822795] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.913916] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 1.919364] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.928460] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 1.933529] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.131513] block sr0: the capability attribute has been deprecated.
[ 5.105124] EXT4-fs (vda): mounted filesystem 0487f251-c6cb-4a79-b6c6-03b1b5c178de ro with ordered data mode. Quota mode: none.
[ 5.108509] Mounting root: ok.
ok.
OpenRC 0.54 is starting up Linux 6.6.34-1-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5560/50200 files, 163595/200704 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 24.1.3 running 'init-local' at Thu, 26 Dec 2024 02:16:39 +0000. Up 10.60 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ... [ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 24.1.3 running 'init' at Thu, 26 Dec 2024 02:16:52 +0000. Up 23.02 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::5054:ff:fe12:3456/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:LHIP9XsbMhN0kekm/kEeacKfKqG3U4cEG3NY17Z+SZs root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| o. o+ |
| = ..o.o |
| .B...o . |
| o.o=.B .. |
| . + SooX +. +|
| o +. +o* .E.|
| ..o=+o. . |
| . + .=.o |
| ..+ . |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:tyMGi778PgcWQtXL329knWo3/TKlQiF4AU4cuhoyVtw root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| ..o+o |
| ... +o . |
| .o E..o . |
| .. ..+ o . |
| + ..o.So.o . ..|
| . o +oo ...o o.o|
| o...o o. +.o.|
| o .... ..o*o.|
| ++oo .o.o+|
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:wXFmJf/1vgSFaEi9Z7tJ+cXLbGo1cH9196sH7b7fzp0 root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| ..*.. |
| ..=.+. . |
| o. oo. ..|
| ... =.o=|
| S o.B.B|
| =.=*|
| . X.B|
| +.@=|
| .o*EO|
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 24.1.3 running 'modules:config' at Thu, 26 Dec 2024 02:16:54 +0000. Up 25.06 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 24.1.3 running 'modules:final' at Thu, 26 Dec 2024 02:16:55 +0000. Up 26.36 seconds.
2024-12-26 02:16:55,860 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240705-r0)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
OK: 144 MiB in 151 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:tyMGi778PgcWQtXL329knWo3/TKlQiF4AU4cuhoyVtw root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:wXFmJf/1vgSFaEi9Z7tJ+cXLbGo1cH9196sH7b7fzp0 root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:LHIP9XsbMhN0kekm/kEeacKfKqG3U4cEG3NY17Z+SZs root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBKFeJ9LyZqw48Uo1EfocZ4vOkgeBZ7OpH95cfp0qI2jKr6QV1Xsbs+6OjoHYXfaq5Z8T3W7p6xgo+2zuSF9zNuU= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAINb52QFcst2BsufBdAcsaLcJsv1Z/rI48YSTtgkOhcfi root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.1.3 finished at Thu, 26 Dec 2024 02:16:58 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net]. Up 28.76 seconds
[ ok ]
Welcome to Alpine Linux 3.20
Kernel 6.6.34-1-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
...........
status: done
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.4-r0 -> 2.14.4-r1)
Executing busybox-1.36.1-r29.trigger
Continuing the upgrade transaction with new apk-tools:
(1/30) Upgrading alpine-conf (3.18.1-r0 -> 3.18.1-r1)
(2/30) Upgrading alpine-release (3.20.1-r0 -> 3.20.3-r0)
(3/30) Upgrading ca-certificates-bundle (20240226-r0 -> 20240705-r0)
(4/30) Upgrading libcrypto3 (3.3.1-r0 -> 3.3.2-r1)
(5/30) Upgrading libssl3 (3.3.1-r0 -> 3.3.2-r1)
(6/30) Upgrading alpine-base (3.20.1-r0 -> 3.20.3-r0)
(7/30) Upgrading ncurses-terminfo-base (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(8/30) Upgrading libncursesw (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(9/30) Upgrading libexpat (2.6.2-r0 -> 2.6.4-r0)
(10/30) Upgrading xz-libs (5.6.1-r3 -> 5.6.2-r0)
(11/30) Upgrading libpanelw (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(12/30) Upgrading python3 (3.12.3-r1 -> 3.12.8-r1)
(13/30) Upgrading python3-pycache-pyc0 (3.12.3-r1 -> 3.12.8-r1)
(14/30) Upgrading pyc (3.12.3-r1 -> 3.12.8-r1)
(15/30) Upgrading py3-jinja2 (3.1.4-r0 -> 3.1.5-r0)
(16/30) Upgrading py3-jinja2-pyc (3.1.4-r0 -> 3.1.5-r0)
(17/30) Upgrading py3-requests (2.31.0-r2 -> 2.32.3-r0)
(18/30) Upgrading py3-requests-pyc (2.31.0-r2 -> 2.32.3-r0)
(19/30) Upgrading tzdata (2024a-r1 -> 2024b-r0)
(20/30) Upgrading python3-pyc (3.12.3-r1 -> 3.12.8-r1)
(21/30) Upgrading linux-virt (6.6.34-r1 -> 6.6.67-r0)
(22/30) Upgrading openssh-keygen (9.7_p1-r3 -> 9.7_p1-r4)
(23/30) Upgrading openssh-client-common (9.7_p1-r3 -> 9.7_p1-r4)
(24/30) Upgrading openssh-client-default (9.7_p1-r3 -> 9.7_p1-r4)
(25/30) Upgrading openssh-sftp-server (9.7_p1-r3 -> 9.7_p1-r4)
(26/30) Upgrading openssh-server-common (9.7_p1-r3 -> 9.7_p1-r4)
(27/30) Upgrading openssh-server-common-openrc (9.7_p1-r3 -> 9.7_p1-r4)
(28/30) Upgrading openssh-server (9.7_p1-r3 -> 9.7_p1-r4)
(29/30) Upgrading openssh (9.7_p1-r3 -> 9.7_p1-r4)
(30/30) Upgrading openssh-server-pam (9.7_p1-r3 -> 9.7_p1-r4)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20240705-r0.trigger
Executing kmod-32-r0.trigger
Executing mkinitfs-3.10.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.67-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 144 MiB in 151 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.33.1-r0)
(3/10) Installing nghttp2-libs (1.62.1-r0)
(4/10) Installing libpsl (0.21.5-r1)
(5/10) Installing libcurl (8.11.1-r0)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.45.2-r0)
(8/10) Installing git-init-template (2.45.2-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r29.trigger
OK: 154 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/json-rpc-shell.git json-rpc-shell
Cloning into 'json-rpc-shell'...
remote: Enumerating objects: 879, done.
remote: Counting objects: 100% (58/58), done.
remote: Compressing objects: 100% (58/58), done.
remote: Total 879 (delta 30), reused 0 (delta 0), pack-reused 821 (from 1)
Receiving objects: 100% (879/879), 502.65 KiB | 7.08 MiB/s, done.
Resolving deltas: 100% (559/559), done.
Submodule 'http-parser' (https://github.com/joyent/http-parser.git) registered for path 'http-parser'
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Cloning into '/home/ci/json-rpc-shell/http-parser'...
remote: Enumerating objects: 1675, done.
remote: Total 1675 (delta 0), reused 0 (delta 0), pack-reused 1675 (from 1)
Receiving objects: 100% (1675/1675), 821.10 KiB | 2.44 MiB/s, done.
Resolving deltas: 100% (1044/1044), done.
Cloning into '/home/ci/json-rpc-shell/liberty'...
remote: Enumerating objects: 789, done.
remote: Counting objects: 100% (258/258), done.
remote: Compressing objects: 100% (255/255), done.
remote: Total 789 (delta 156), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (789/789), 394.76 KiB | 6.07 MiB/s, done.
Resolving deltas: 100% (477/477), done.
Submodule path 'http-parser': checked out 'ec8b5ee63f0e51191ea43bb0c6eac7bfbff3141d'
Submodule path 'liberty': checked out '1930f138d4836f8ed9613a17bfe09dc53441618a'
+ cd json-rpc-shell
+ git -c 'advice.detachedHead=false' checkout 74fcb0682886c8fbf4ba82a76d7c5de15f167340
HEAD is now at 74fcb06 Bump version, update NEWS
+ git+ describesed --always s/^v// --tags
--match 'v*'
+ version=1.2.0
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/1.2.0/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake asciidoctor libev-dev ncurses-dev jansson-dev curl-dev file-dev readline-dev libedit-dev
(1/51) Installing ruby-libs (3.3.6-r0)
(2/51) Installing libucontext (1.2-r3)
(3/51) Installing ruby (3.3.6-r0)
(4/51) Installing asciidoctor (2.0.23-r0)
(5/51) Installing jansson (2.14-r4)
(6/51) Installing binutils (2.42-r0)
(7/51) Installing libmagic (5.45-r1)
(8/51) Installing file (5.45-r1)
(9/51) Installing libgomp (13.2.1_git20240309-r0)
(10/51) Installing libatomic (13.2.1_git20240309-r0)
(11/51) Installing isl26 (0.26-r1)
(12/51) Installing mpfr4 (4.2.1-r0)
(13/51) Installing mpc1 (1.3.1-r1)
(14/51) Installing gcc (13.2.1_git20240309-r0)
(15/51) Installing libstdc++-dev (13.2.1_git20240309-r0)
(16/51) Installing musl-dev (1.2.5-r0)
(17/51) Installing g++ (13.2.1_git20240309-r0)
(18/51) Installing make (4.4.1-r2)
(19/51) Installing fortify-headers (1.1-r3)
(20/51) Installing patch (2.7.6-r10)
(21/51) Installing build-base (0.5-r3)
(22/51) Installing lz4-libs (1.9.4-r5)
(23/51) Installing libarchive (3.7.7-r0)
(24/51) Installing rhash-libs (1.4.4-r0)
(25/51) Installing libuv (1.48.0-r0)
(26/51) Installing cmake (3.29.3-r0)
(27/51) Installing brotli (1.1.0-r2)
(28/51) Installing pkgconf (2.2.0-r0)
(29/51) Installing brotli-dev (1.1.0-r2)
(30/51) Installing c-ares-dev (1.33.1-r0)
(31/51) Installing libidn2-dev (2.3.7-r0)
(32/51) Installing libpsl-utils (0.21.5-r1)
(33/51) Installing libpsl-dev (0.21.5-r1)
(34/51) Installing nghttp2-dev (1.62.1-r0)
(35/51) Installing openssl-dev (3.3.2-r1)
(36/51) Installing zlib-dev (1.3.1-r1)
(37/51) Installing zstd (1.5.6-r0)
(38/51) Installing zstd-dev (1.5.6-r0)
(39/51) Installing curl-dev (8.11.1-r0)
(40/51) Installing file-dev (5.45-r1)
(41/51) Installing jansson-dev (2.14-r4)
(42/51) Installing bsd-compat-headers (0.7.2-r6)
(43/51) Installing libformw (6.4_p20240420-r2)
(44/51) Installing libmenuw (6.4_p20240420-r2)
(45/51) Installing libncurses++ (6.4_p20240420-r2)
(46/51) Installing ncurses-dev (6.4_p20240420-r2)
(47/51) Installing libedit-dev (20240517.3.1-r0)
(48/51) Installing libev (4.33-r1)
(49/51) Installing libev-dev (4.33-r1)
(50/51) Installing libhistory (8.2.10-r0)
(51/51) Installing readline-dev (8.2.10-r0)
Executing busybox-1.36.1-r29.trigger
OK: 452 MiB in 212 packages
+ cmake -B build
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Curses: /usr/lib/libcurses.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Found Ncursesw: ncursesw
-- Checking for modules 'libcurl;jansson;libssl;libcrypto'
-- Found libcurl, version 8.11.1
-- Found jansson, version 2.14
-- Found libssl, version 3.3.2
-- Found libcrypto, version 3.3.2
-- Found LibEV: ev
-- Performing Test ICONV_ACCEPTS_TRANSLIT
-- Performing Test ICONV_ACCEPTS_TRANSLIT - Failed
-- Found LibMagic: /usr/lib/libmagic.so
-- Configuring done (1.6s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/json-rpc-shell/build
+ cmake --build build -- package
[ 14%] Building C object CMakeFiles/json-rpc-shell.dir/json-rpc-shell.c.o
[ 28%] Building C object CMakeFiles/json-rpc-shell.dir/http-parser/http_parser.c.o
[ 42%] Linking C executable json-rpc-shell
[ 42%] Built target json-rpc-shell
[ 57%] Building C object CMakeFiles/json-rpc-test-server.dir/json-rpc-test-server.c.o
[ 71%] Building C object CMakeFiles/json-rpc-test-server.dir/http-parser/http_parser.c.o
[ 85%] Linking C executable json-rpc-test-server
[ 85%] Built target json-rpc-test-server
[100%] Generating man page for json-rpc-shell
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: json-rpc-shell
CPack: - Install project: json-rpc-shell []
CPack: Create package
CPack: - package: /home/ci/json-rpc-shell/build/json-rpc-shell-1.2.0-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: json-rpc-shell
CPack: - Install project: json-rpc-shell []
CPack: Create package
CPack: - package: /home/ci/json-rpc-shell/build/json-rpc-shell-1.2.0-Linux-x86_64.zip generated.
+ cmake build '-DWANT_READLINE=OFF' '-DWANT_LIBEDIT=ON'
-- Checking for module 'libedit'
-- Found libedit, version 3.1
-- Configuring done (0.3s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/json-rpc-shell/build
+ cmake --build build -- package
[ 14%] Building C object CMakeFiles/json-rpc-shell.dir/json-rpc-shell.c.o
[ 28%] Building C object CMakeFiles/json-rpc-shell.dir/http-parser/http_parser.c.o
[ 42%] Linking C executable json-rpc-shell
[ 42%] Built target json-rpc-shell
[ 57%] Building C object CMakeFiles/json-rpc-test-server.dir/json-rpc-test-server.c.o
[ 71%] Building C object CMakeFiles/json-rpc-test-server.dir/http-parser/http_parser.c.o
[ 85%] Linking C executable json-rpc-test-server
[ 85%] Built target json-rpc-test-server
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: json-rpc-shell
CPack: - Install project: json-rpc-shell []
CPack: Create package
CPack: - package: /home/ci/json-rpc-shell/build/json-rpc-shell-1.2.0-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: json-rpc-shell
CPack: - Install project: json-rpc-shell []
CPack: Create package
CPack: - package: /home/ci/json-rpc-shell/build/json-rpc-shell-1.2.0-Linux-x86_64.zip generated.