- Created
- 7d ago
- Changed
- 7d ago
- Project
- p/liberty
- Commit
- af889b733e81fa40d7a7ff652386585115e186f5
- Runner
- Alpine 3.20
- State
- Success
- Notified
- 1
- Duration
- 1m39s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.20.3-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.20.3-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.20.3-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.6.49-0-virt (buildozer@build-3-20-x86_64) (gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #1-Alpine SMP PREEMPT_DYNAMIC 2024-09-04 12:53:09
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1570253098 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000008] tsc: Detected 1696.073 MHz processor
[ 0.001172] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001218] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001223] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001615] RAMDISK: [mem 0x7f6bd000-0x7ffd9fff]
[ 0.001619] ACPI: Early table checksum verification disabled
[ 0.001624] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[ 0.001631] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001641] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001650] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001656] ACPI: FACS 0x000000007FFE0000 000040
[ 0.001662] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001668] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001674] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001679] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[ 0.001681] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[ 0.001683] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.001684] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[ 0.001685] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[ 0.001686] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[ 0.002182] Zone ranges:
[ 0.002184] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.002188] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.002190] Normal empty
[ 0.002192] Movable zone start for each node
[ 0.002193] Early memory node ranges
[ 0.002193] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.002196] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.002198] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.002584] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002614] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.012580] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.013304] ACPI: PM-Timer IO Port: 0x608
[ 0.013326] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.013392] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.013397] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013400] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.013402] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013404] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.013406] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.013413] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013415] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013422] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.013448] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.013473] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.013475] Booting paravirtualized kernel on KVM
[ 0.013477] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.021048] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.021676] percpu: Embedded 57 pages/cpu s195560 r8192 d29720 u1048576
[ 0.021728] kvm-guest: PV spinlocks disabled, no host support
[ 0.021729] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.021814] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.022392] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.022880] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.022984] Built 1 zonelists, mobility grouping on. Total pages: 515802
[ 0.023625] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.031040] Memory: 2012820K/2096608K available (14336K kernel code, 1800K rwdata, 8248K rodata, 2692K init, 2024K bss, 83528K reserved, 0K cma-reserved)
[ 0.042930] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.043094] Kernel/User page tables isolation: enabled
[ 0.044401] Dynamic Preempt: none
[ 0.044648] rcu: Preemptible hierarchical RCU implementation.
[ 0.044650] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.044653] Trampoline variant of Tasks RCU enabled.
[ 0.044654] Tracing variant of Tasks RCU enabled.
[ 0.044655] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.044656] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.049758] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.050020] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.050222] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.060573] Console: colour VGA+ 80x25
[ 0.060643] printk: console [ttyS0] enabled
[ 0.225871] ACPI: Core revision 20230628
[ 0.227594] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.230334] APIC: Switch to symmetric I/O mode setup
[ 0.232185] x2apic enabled
[ 0.233512] APIC: Switched APIC routing to: physical x2apic
[ 0.237252] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.239404] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.242502] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960730)
[ 0.244705] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.246010] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.247461] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.249549] Spectre V2 : Mitigation: Retpolines
[ 0.252500] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.254728] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.256368] Speculative Store Bypass: Vulnerable
[ 0.257509] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.259094] MMIO Stale Data: Unknown: No mitigations
[ 0.260326] x86/fpu: x87 FPU will use FXSAVE
[ 0.284302] Freeing SMP alternatives memory: 32K
[ 0.285476] pid_max: default: 32768 minimum: 301
[ 0.287575] LSM: initializing lsm=lockdown,capability,landlock,integrity
[ 0.290917] landlock: Up and running.
[ 0.292111] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.292506] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.417082] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.419767] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.421541] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.422495] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.422495] signal: max sigframe size: 1440
[ 0.422495] rcu: Hierarchical SRCU implementation.
[ 0.422499] rcu: Max phase no-delay instances is 1000.
[ 0.424179] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.425732] smp: Bringing up secondary CPUs ...
[ 0.427056] smpboot: x86: Booting SMP configuration:
[ 0.428411] .... node #0, CPUs: #1
[ 0.442551] smp: Brought up 1 node, 2 CPUs
[ 0.444821] smpboot: Max logical packages: 1
[ 0.446041] ----------------
[ 0.446853] | NMI testsuite:
[ 0.447715] --------------------
[ 0.448871] remote IPI: ok |
[ 0.448902] local IPI: ok |
[ 0.448902] --------------------
[ 0.452504] Good, all 2 testcases passed! |
[ 0.453850] ---------------------------------
[ 0.455060] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.457356] devtmpfs: initialized
[ 0.457356] x86/mm: Memory block size: 128MB
[ 0.457356] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.462512] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.466772] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.468797] audit: initializing netlink subsys (disabled)
[ 0.470395] audit: type=2000 audit(1736313350.864:1): state=initialized audit_enabled=0 res=1
[ 0.470395] thermal_sys: Registered thermal governor 'step_wise'
[ 0.472532] cpuidle: using governor ladder
[ 0.476135] cpuidle: using governor menu
[ 0.477681] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.482738] PCI: Using configuration type 1 for base access
[ 0.484941] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.492968] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.494646] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.496516] ACPI: Added _OSI(Module Device)
[ 0.496516] ACPI: Added _OSI(Processor Device)
[ 0.496516] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.496516] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.503362] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.506667] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.506667] ACPI: Interpreter enabled
[ 0.506667] ACPI: PM: (supports S0 S3 S5)
[ 0.507619] ACPI: Using IOAPIC for interrupt routing
[ 0.512553] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.515622] PCI: Using E820 reservations for host bridge windows
[ 0.517667] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.524147] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.526266] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.529019] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.532524] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.537189] acpiphp: Slot [3] registered
[ 0.538800] acpiphp: Slot [4] registered
[ 0.540267] acpiphp: Slot [5] registered
[ 0.541745] acpiphp: Slot [6] registered
[ 0.542551] acpiphp: Slot [7] registered
[ 0.544045] acpiphp: Slot [8] registered
[ 0.545532] acpiphp: Slot [9] registered
[ 0.546977] acpiphp: Slot [10] registered
[ 0.548467] acpiphp: Slot [11] registered
[ 0.549938] acpiphp: Slot [12] registered
[ 0.551146] acpiphp: Slot [13] registered
[ 0.552551] acpiphp: Slot [14] registered
[ 0.553984] acpiphp: Slot [15] registered
[ 0.555454] acpiphp: Slot [16] registered
[ 0.557065] acpiphp: Slot [17] registered
[ 0.558515] acpiphp: Slot [18] registered
[ 0.559944] acpiphp: Slot [19] registered
[ 0.561423] acpiphp: Slot [20] registered
[ 0.562544] acpiphp: Slot [21] registered
[ 0.563830] acpiphp: Slot [22] registered
[ 0.565269] acpiphp: Slot [23] registered
[ 0.566653] acpiphp: Slot [24] registered
[ 0.567852] acpiphp: Slot [25] registered
[ 0.569027] acpiphp: Slot [26] registered
[ 0.570168] acpiphp: Slot [27] registered
[ 0.571366] acpiphp: Slot [28] registered
[ 0.572538] acpiphp: Slot [29] registered
[ 0.573581] acpiphp: Slot [30] registered
[ 0.574585] acpiphp: Slot [31] registered
[ 0.575739] PCI host bridge to bus 0000:00
[ 0.576872] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.578832] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.580698] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.582502] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.584605] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.586791] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.588438] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.590865] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.593486] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.599747] pci 0000:00:01.1: reg 0x20: [io 0xc120-0xc12f]
[ 0.604311] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.606316] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.608581] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.610635] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.612834] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.615276] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.617354] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.619507] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.623237] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.629605] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 0.641403] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.642767] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.645515] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.648563] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc11f]
[ 0.653138] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 0.661222] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.663812] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.668043] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.674172] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.677112] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 0.686051] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.691215] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.696100] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0ff]
[ 0.699263] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[ 0.706011] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.712361] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.712681] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.714334] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.716571] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.718159] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.720206] iommu: Default domain type: Translated
[ 0.722500] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.724295] SCSI subsystem initialized
[ 0.725463] pps_core: LinuxPPS API ver. 1 registered
[ 0.725463] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.727061] PTP clock support registered
[ 0.732567] PCI: Using ACPI for IRQ routing
[ 0.734330] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.734658] clocksource: Switched to clocksource kvm-clock
[ 0.738062] VFS: Disk quotas dquot_6.6.0
[ 0.739504] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.741912] pnp: PnP ACPI init
[ 0.741912] pnp: PnP ACPI: found 6 devices
[ 0.750544] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.753932] NET: Registered PF_INET protocol family
[ 0.755257] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.758364] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.760482] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.762808] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.765069] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.766971] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.768785] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.770650] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.772310] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.774431] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.776620] NET: Registered PF_XDP protocol family
[ 0.777825] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.779350] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.780849] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.783131] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.785586] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.788116] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.790142] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.792066] PCI: CLS 0 bytes, default 64
[ 0.793134] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.793237] Unpacking initramfs...
[ 0.796334] Initialise system trusted keyrings
[ 0.798605] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.800441] zbud: loaded
[ 0.801367] Key type asymmetric registered
[ 0.802548] Asymmetric key parser 'x509' registered
[ 0.804044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.806232] io scheduler mq-deadline registered
[ 0.807503] io scheduler kyber registered
[ 0.808744] io scheduler bfq registered
[ 0.810549] ERST DBG: ERST support is disabled.
[ 0.836411] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.864527] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.896133] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.900195] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.902244] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.905606] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.908441] scsi host0: ata_piix
[ 0.909771] scsi host1: ata_piix
[ 0.910807] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 0.912750] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 0.914868] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.919148] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.920544] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.922037] rtc_cmos 00:05: RTC can wake from S4
[ 0.924751] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.927625] rtc_cmos 00:05: registered as rtc0
[ 0.928988] rtc_cmos 00:05: setting system clock to 2025-01-08T05:15:50 UTC (1736313350)
[ 0.931342] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.933475] intel_pstate: CPU model not supported
[ 0.935029] gre: GRE over IPv4 demultiplexor driver
[ 0.944789] Freeing initrd memory: 9332K
[ 0.952449] NET: Registered PF_INET6 protocol family
[ 0.954583] Segment Routing with IPv6
[ 0.955684] In-situ OAM (IOAM) with IPv6
[ 0.956933] Key type dns_resolver registered
[ 0.958230] IPI shorthand broadcast: enabled
[ 0.961756] sched_clock: Marking stable (784445136, 172463105)->(963626466, -6718225)
[ 0.967505] registered taskstats version 1
[ 0.968832] Loading compiled-in X.509 certificates
[ 0.977851] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.984178] Key type .fscrypt registered
[ 0.985336] Key type fscrypt-provisioning registered
[ 1.083133] ata2: found unknown device (class 0)
[ 1.086196] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.090114] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.165253] Freeing unused kernel image (initmem) memory: 2692K
[ 1.166468] Write protecting the kernel read-only data: 24576k
[ 1.168329] Freeing unused kernel image (rodata/data gap) memory: 1992K
[ 1.169590] rodata_test: all tests were successful
[ 1.170464] Run /init as init process
[ 1.185665] Alpine Init 3.10.1-r0
Alpine Init 3.10.1-r0
[ 1.187146] Loading boot drivers...
* Loading boot drivers: [ 1.233778] ACPI: bus type USB registered
[ 1.234618] usbcore: registered new interface driver usbfs
[ 1.235979] usbcore: registered new interface driver hub
[ 1.237170] usbcore: registered new device driver usb
[ 1.244218] usbcore: registered new interface driver usb-storage
[ 1.465281] loop: module loaded
[ 1.512323] ACPI: bus type drm_connector registered
[ 1.552621] Loading boot drivers: ok.
ok.
[ 1.555799] Mounting root...
* Mounting root: [ 1.594407] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.631952] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.632965] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.636716] [drm] Found EDID data blob.
[ 1.637718] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 1.653738] Console: switching to colour frame buffer device 160x50
[ 1.656705] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.825091] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.828951] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.953168] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 1.959447] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.966701] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 1.971679] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.189282] block sr0: the capability attribute has been deprecated.
[ 5.185236] EXT4-fs (vda): mounted filesystem b10edeae-5f31-42e8-a9a0-72c52d459fd0 ro with ordered data mode. Quota mode: none.
[ 5.191734] Mounting root: ok.
ok.
OpenRC 0.54 is starting up Linux 6.6.49-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5548/50200 files, 163648/200704 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 24.1.3 running 'init-local' at Wed, 08 Jan 2025 05:16:00 +0000. Up 10.73 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ... [ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 24.1.3 running 'init' at Wed, 08 Jan 2025 05:16:12 +0000. Up 23.28 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::5054:ff:fe12:3456/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:Ga/Okm5y9AQjBbw0ayhM5ih7PMsGg0Qw6M+2vXLn8Q8 root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
|= ... |
|.= + . |
|O o = . |
|+=. = o + |
|++o. . oS . |
|= ++ . .. |
| =.oo. =.E |
| +o.o=++ . |
| . o*=oo... |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:z4JIvEq1yZj7RV/XOX+xJr9Mc4i9Ng8Ilk7LfdCka+M root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| |
| |
| . |
| . . = . |
| + . S * + =. |
| * * o O = * +o|
| + * o o * B.==+|
| . o . . o oOo+|
| o.. E..*o|
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:N4FSvIpNhzuYwYEYY404wq4xQG+UtNjnsSvQnHB2C/o root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
|*=++. .. |
|B+*oo ... |
|++ X =..... |
|o.O O *.o . |
|.= + @ +S o |
|. o + * . . |
| E . . |
| . |
| |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 24.1.3 running 'modules:config' at Wed, 08 Jan 2025 05:16:15 +0000. Up 26.09 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 24.1.3 running 'modules:final' at Wed, 08 Jan 2025 05:16:16 +0000. Up 27.58 seconds.
2025-01-08 05:16:17,004 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.20/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20241121-r0)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20241121-r0.trigger
OK: 144 MiB in 151 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:z4JIvEq1yZj7RV/XOX+xJr9Mc4i9Ng8Ilk7LfdCka+M root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:N4FSvIpNhzuYwYEYY404wq4xQG+UtNjnsSvQnHB2C/o root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:Ga/Okm5y9AQjBbw0ayhM5ih7PMsGg0Qw6M+2vXLn8Q8 root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBKtZzrgb0jmctjzP1/jvXTa11lHk0B7LQy7X0n3rD9keX0Ce8zjOqAYB18JFNeB2Fo2KTy5uq1ZpWY5lHsEGu0U= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMwL3mL6Dc4dLZM/nUD2XfFoP+IkdpDObf9TV/c3CLQ3 root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.1.3 finished at Wed, 08 Jan 2025 05:16:19 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net]. Up 29.89 seconds
[ ok ]
Welcome to Alpine Linux 3.20
Kernel 6.6.49-0-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
..........
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.4-r0 -> 2.14.4-r1)
Executing busybox-1.36.1-r29.trigger
Continuing the upgrade transaction with new apk-tools:
(1/21) Upgrading alpine-conf (3.18.1-r0 -> 3.18.1-r1)
(2/21) Upgrading alpine-release (3.20.3-r0 -> 3.20.4-r0)
(3/21) Upgrading ca-certificates-bundle (20240705-r0 -> 20241121-r0)
(4/21) Upgrading libcrypto3 (3.3.2-r0 -> 3.3.2-r1)
(5/21) Upgrading libssl3 (3.3.2-r0 -> 3.3.2-r1)
(6/21) Upgrading alpine-base (3.20.3-r0 -> 3.20.4-r0)
(7/21) Upgrading ncurses-terminfo-base (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(8/21) Upgrading libncursesw (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(9/21) Upgrading libexpat (2.6.3-r0 -> 2.6.4-r0)
(10/21) Upgrading libpanelw (6.4_p20240420-r0 -> 6.4_p20240420-r2)
(11/21) Upgrading python3 (3.12.3-r2 -> 3.12.8-r1)
(12/21) Upgrading python3-pycache-pyc0 (3.12.3-r2 -> 3.12.8-r1)
(13/21) Upgrading pyc (3.12.3-r2 -> 3.12.8-r1)
(14/21) Upgrading py3-jinja2 (3.1.4-r0 -> 3.1.5-r0)
(15/21) Upgrading py3-jinja2-pyc (3.1.4-r0 -> 3.1.5-r0)
(16/21) Upgrading python3-pyc (3.12.3-r2 -> 3.12.8-r1)
(17/21) Upgrading coreutils-env (9.5-r1 -> 9.5-r2)
(18/21) Upgrading coreutils-fmt (9.5-r1 -> 9.5-r2)
(19/21) Upgrading coreutils-sha512sum (9.5-r1 -> 9.5-r2)
(20/21) Upgrading coreutils (9.5-r1 -> 9.5-r2)
(21/21) Upgrading linux-virt (6.6.49-r0 -> 6.6.69-r0)
Executing busybox-1.36.1-r29.trigger
Executing ca-certificates-20241121-r0.trigger
Executing kmod-32-r0.trigger
Executing mkinitfs-3.10.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.69-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 144 MiB in 151 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.33.1-r0)
(3/10) Installing nghttp2-libs (1.62.1-r0)
(4/10) Installing libpsl (0.21.5-r1)
(5/10) Installing libcurl (8.11.1-r0)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.45.2-r0)
(8/10) Installing git-init-template (2.45.2-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r29.trigger
OK: 154 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/liberty.git liberty
Cloning into 'liberty'...
remote: Enumerating objects: 863, done.
remote: Counting objects: 100% (332/332), done.
remote: Compressing objects: 100% (329/329), done.
remote: Total 863 (delta 207), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (863/863), 426.09 KiB | 5.53 MiB/s, done.
Resolving deltas: 100% (528/528), done.
+ cd liberty
+ git -c 'advice.detachedHead=false' checkout af889b733e81fa40d7a7ff652386585115e186f5
HEAD is now at af889b7 wdye: ensure we find our own config.h
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=af889b7
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/af889b7/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake openssl-dev pulseaudio-dev go nodejs
(1/108) Installing jansson (2.14-r4)
(2/108) Installing binutils (2.42-r0)
(3/108) Installing libmagic (5.45-r1)
(4/108) Installing file (5.45-r1)
(5/108) Installing libgomp (13.2.1_git20240309-r0)
(6/108) Installing libatomic (13.2.1_git20240309-r0)
(7/108) Installing isl26 (0.26-r1)
(8/108) Installing mpfr4 (4.2.1-r0)
(9/108) Installing mpc1 (1.3.1-r1)
(10/108) Installing gcc (13.2.1_git20240309-r0)
(11/108) Installing libstdc++-dev (13.2.1_git20240309-r0)
(12/108) Installing musl-dev (1.2.5-r0)
(13/108) Installing g++ (13.2.1_git20240309-r0)
(14/108) Installing make (4.4.1-r2)
(15/108) Installing fortify-headers (1.1-r3)
(16/108) Installing patch (2.7.6-r10)
(17/108) Installing build-base (0.5-r3)
(18/108) Installing lz4-libs (1.9.4-r5)
(19/108) Installing libarchive (3.7.7-r0)
(20/108) Installing rhash-libs (1.4.4-r0)
(21/108) Installing libuv (1.48.0-r0)
(22/108) Installing cmake (3.29.3-r0)
(23/108) Installing go (1.22.10-r0)
(24/108) Installing ada-libs (2.7.8-r0)
(25/108) Installing libbase64 (0.5.2-r0)
(26/108) Installing icu-data-en (74.2-r0)
Executing icu-data-en-74.2-r0.post-install
*
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
*
(27/108) Installing icu-libs (74.2-r0)
(28/108) Installing nodejs (20.15.1-r0)
(29/108) Installing pkgconf (2.2.0-r0)
(30/108) Installing openssl-dev (3.3.2-r1)
(31/108) Installing libintl (0.22.5-r0)
(32/108) Installing glib (2.80.5-r0)
(33/108) Installing libxau (1.0.11-r4)
(34/108) Installing libxdmcp (1.1.5-r1)
(35/108) Installing libxcb (1.16.1-r0)
(36/108) Installing libx11 (1.8.9-r1)
(37/108) Installing libasyncns (0.8-r3)
(38/108) Installing dbus-libs (1.14.10-r1)
(39/108) Installing libltdl (2.4.7-r3)
(40/108) Installing orc (0.4.40-r0)
(41/108) Installing libogg (1.3.5-r5)
(42/108) Installing libflac (1.4.3-r1)
(43/108) Installing alsa-lib (1.2.11-r0)
(44/108) Installing opus (1.5.2-r0)
(45/108) Installing libvorbis (1.3.7-r2)
(46/108) Installing libsndfile (1.2.2-r1)
(47/108) Installing soxr (0.1.3-r7)
(48/108) Installing speexdsp (1.2.1-r2)
(49/108) Installing tdb-libs (1.4.9-r1)
(50/108) Installing libpulse (17.0-r0)
(51/108) Installing libpulse-mainloop-glib (17.0-r0)
(52/108) Installing bzip2-dev (1.0.8-r6)
(53/108) Installing libxml2 (2.12.7-r0)
(54/108) Installing libxml2-utils (2.12.7-r0)
(55/108) Installing docbook-xml (4.5-r9)
Executing docbook-xml-4.5-r9.post-install
(56/108) Installing libgpg-error (1.49-r0)
(57/108) Installing libgcrypt (1.10.3-r0)
(58/108) Installing libxslt (1.1.39-r1)
(59/108) Installing docbook-xsl (1.79.2-r9)
Executing docbook-xsl-1.79.2-r9.post-install
(60/108) Installing xz (5.6.2-r0)
(61/108) Installing gettext-asprintf (0.22.5-r0)
(62/108) Installing gettext-libs (0.22.5-r0)
(63/108) Installing gettext-envsubst (0.22.5-r0)
(64/108) Installing gettext (0.22.5-r0)
(65/108) Installing gettext-dev (0.22.5-r0)
(66/108) Installing py3-parsing (3.1.2-r1)
(67/108) Installing py3-parsing-pyc (3.1.2-r1)
(68/108) Installing py3-packaging (24.0-r1)
(69/108) Installing py3-packaging-pyc (24.0-r1)
(70/108) Installing linux-headers (6.6-r0)
(71/108) Installing libffi-dev (3.4.6-r0)
(72/108) Installing bsd-compat-headers (0.7.2-r6)
(73/108) Installing libformw (6.4_p20240420-r2)
(74/108) Installing libmenuw (6.4_p20240420-r2)
(75/108) Installing libncurses++ (6.4_p20240420-r2)
(76/108) Installing ncurses-dev (6.4_p20240420-r2)
(77/108) Installing libedit-dev (20240517.3.1-r0)
(78/108) Installing zlib-dev (1.3.1-r1)
(79/108) Installing libpcre2-16 (10.43-r0)
(80/108) Installing libpcre2-32 (10.43-r0)
(81/108) Installing pcre2-dev (10.43-r0)
(82/108) Installing sqlite (3.45.3-r1)
(83/108) Installing sqlite-dev (3.45.3-r1)
(84/108) Installing util-linux (2.40.1-r1)
(85/108) Installing dmesg (2.40.1-r1)
(86/108) Installing setarch (2.40.1-r1)
(87/108) Installing util-linux-misc (2.40.1-r1)
(88/108) Installing runuser (2.40.1-r1)
(89/108) Installing losetup (2.40.1-r1)
(90/108) Installing hexdump (2.40.1-r1)
(91/108) Installing uuidgen (2.40.1-r1)
(92/108) Installing mcookie (2.40.1-r1)
(93/108) Installing agetty (2.40.1-r1)
(94/108) Installing agetty-openrc (0.54-r1)
(95/108) Installing wipefs (2.40.1-r1)
(96/108) Installing cfdisk (2.40.1-r1)
(97/108) Installing umount (2.40.1-r1)
(98/108) Installing util-linux-openrc (2.40.1-r1)
(99/108) Installing flock (2.40.1-r1)
(100/108) Installing lsblk (2.40.1-r1)
(101/108) Installing libcap-ng (0.8.5-r0)
(102/108) Installing setpriv (2.40.1-r1)
(103/108) Installing logger (2.40.1-r1)
(104/108) Installing fstrim (2.40.1-r1)
(105/108) Installing findmnt (2.40.1-r1)
(106/108) Installing util-linux-dev (2.40.1-r1)
(107/108) Installing glib-dev (2.80.5-r0)
(108/108) Installing pulseaudio-dev (17.0-r0)
Executing busybox-1.36.1-r29.trigger
Executing glib-2.80.5-r0.trigger
No schema files found: doing nothing.
OK: 737 MiB in 269 packages
+ doas apk add --no-interactive lua5.4-dev ncurses-dev
(1/3) Installing lua5.4-libs (5.4.6-r1)
(2/3) Installing lua5.4 (5.4.6-r1)
(3/3) Installing lua5.4-dev (5.4.6-r1)
Executing busybox-1.36.1-r29.trigger
OK: 739 MiB in 272 packages
+ cmake -B build
-- The C compiler identification is GNU 13.2.1
-- The CXX compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Checking for modules 'libssl;libcrypto'
-- Found libssl, version 3.3.2
-- Found libcrypto, version 3.3.2
-- Checking for module 'libpulse'
-- Found libpulse, version 17.0
CMake Warning at CMakeLists.txt:135 (message):
Cannot test generated protocol code for Swift
-- Configuring done (1.3s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build
+ cmake --build build
[ 4%] Building C object CMakeFiles/test-liberty.dir/tests/liberty.c.o
[ 9%] Linking C executable test-liberty
[ 9%] Built target test-liberty
[ 14%] Building C object CMakeFiles/test-proto.dir/tests/proto.c.o
In file included from /home/ci/liberty/tests/proto.c:34:
/home/ci/liberty/tests/proto.c: In function 'test_irc':
/home/ci/liberty/tests/../liberty.c:236:29: warning: right-hand operand of comma expression has no effect [-Wunused-value]
236 | ((condition) ? true : \
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
237 | (assertion_failure_handler (g_soft_asserts_are_deadly, \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
238 | __FILE__, __LINE__, __func__, #condition), false))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ci/liberty/tests/proto.c:56:25: note: in expansion of macro 'soft_assert'
56 | soft_assert (!"found unexpected message tag");
| ^~~~~~~~~~~
[ 19%] Linking C executable test-proto
[ 19%] Built target test-proto
[ 23%] Building C object CMakeFiles/test-xdg.dir/tests/xdg.c.o
[ 28%] Linking C executable test-xdg
[ 28%] Built target test-xdg
[ 33%] Building C object CMakeFiles/test-pulse.dir/tests/pulse.c.o
[ 38%] Linking C executable test-pulse
[ 38%] Built target test-pulse
[ 42%] Generating man page for libertyxdr
[ 42%] Built target docs
[ 47%] Generating test protocol code (c)
[ 52%] Generating test protocol code (cpp)
[ 57%] Generating test protocol code (go)
[ 61%] Generating test protocol code (mjs)
[ 66%] Generating test protocol code (swift)
[ 66%] Built target test-lxdrgen-outputs
[ 71%] Building C object CMakeFiles/test-lxdrgen-c.dir/tests/lxdrgen.c.o
[ 76%] Linking C executable test-lxdrgen-c
[ 80%] Built target test-lxdrgen-c
[ 85%] Building CXX object CMakeFiles/test-lxdrgen-cpp.dir/tests/lxdrgen.cpp.o
[ 90%] Building CXX object CMakeFiles/test-lxdrgen-cpp.dir/tools/lxdrgen-cpp-posix.cpp.o
[ 95%] Linking CXX executable test-lxdrgen-cpp
[100%] Built target test-lxdrgen-cpp
+ cmake --build build -- test
Running tests...
Test project /home/ci/liberty/build
Start 1: test-liberty
1/10 Test #1: test-liberty ..................... Passed 0.03 sec
Start 2: test-proto
2/10 Test #2: test-proto ....................... Passed 0.01 sec
Start 3: test-xdg
3/10 Test #3: test-xdg ......................... Passed 0.00 sec
Start 4: test-pulse
4/10 Test #4: test-pulse ....................... Passed 0.00 sec
Start 5: test-help2adoc
5/10 Test #5: test-help2adoc ................... Passed 0.12 sec
Start 6: test-cmake-parser
6/10 Test #6: test-cmake-parser ................ Passed 0.07 sec
Start 7: test-lxdrgen-c
7/10 Test #7: test-lxdrgen-c ................... Passed 0.00 sec
Start 8: test-lxdrgen-cpp
8/10 Test #8: test-lxdrgen-cpp ................. Passed 0.00 sec
Start 9: test-lxdrgen-go
9/10 Test #9: test-lxdrgen-go .................. Passed 12.58 sec
Start 10: test-lxdrgen-mjs
10/10 Test #10: test-lxdrgen-mjs ................. Passed 0.08 sec
100% tests passed, 0 tests failed out of 10
Total Test time (real) = 12.91 sec
+ cmake -B build-wdye54 -S tools/wdye
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Curses: /usr/lib/libcurses.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (0.9s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build-wdye54
+ cmake --build build-wdye54
[ 50%] Building C object CMakeFiles/wdye.dir/wdye.c.o
[100%] Linking C executable wdye
[100%] Built target wdye
+ cmake --build build-wdye54 -- test
Running tests...
Test project /home/ci/liberty/build-wdye54
Start 1: simple
1/1 Test #1: simple ........................... Passed 0.51 sec
100% tests passed, 0 tests failed out of 1
Total Test time (real) = 0.51 sec
+ doas apk del --no-interactive lua5.4-dev
(1/3) Purging lua5.4-dev (5.4.6-r1)
(2/3) Purging lua5.4 (5.4.6-r1)
(3/3) Purging lua5.4-libs (5.4.6-r1)
Executing busybox-1.36.1-r29.trigger
OK: 737 MiB in 269 packages
+ doas apk add --no-interactive lua5.3-dev
(1/4) Installing linenoise (1.0-r5)
(2/4) Installing lua5.3-libs (5.3.6-r6)
(3/4) Installing lua5.3 (5.3.6-r6)
(4/4) Installing lua5.3-dev (5.3.6-r6)
Executing busybox-1.36.1-r29.trigger
OK: 739 MiB in 273 packages
+ cmake -B build-wdye53 -S tools/wdye
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Curses: /usr/lib/libcurses.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (0.8s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build-wdye53
+ cmake --build build-wdye53
[ 50%] Building C object CMakeFiles/wdye.dir/wdye.c.o
[100%] Linking C executable wdye
[100%] Built target wdye
+ cmake --build build-wdye53 -- test
Running tests...
Test project /home/ci/liberty/build-wdye53
Start 1: simple
1/1 Test #1: simple ........................... Passed 0.51 sec
100% tests passed, 0 tests failed out of 1
Total Test time (real) = 0.51 sec
+ doas apk del --no-interactive --rdepends ncurses-dev
(1/78) Purging agetty-openrc (0.54-r1)
(2/78) Purging agetty (2.40.1-r1)
(3/78) Purging cfdisk (2.40.1-r1)
(4/78) Purging dmesg (2.40.1-r1)
(5/78) Purging findmnt (2.40.1-r1)
(6/78) Purging flock (2.40.1-r1)
(7/78) Purging fstrim (2.40.1-r1)
(8/78) Purging hexdump (2.40.1-r1)
(9/78) Purging logger (2.40.1-r1)
(10/78) Purging losetup (2.40.1-r1)
(11/78) Purging lsblk (2.40.1-r1)
(12/78) Purging mcookie (2.40.1-r1)
(13/78) Purging pulseaudio-dev (17.0-r0)
(14/78) Purging libpulse-mainloop-glib (17.0-r0)
(15/78) Purging libpulse (17.0-r0)
(16/78) Purging py3-packaging-pyc (24.0-r1)
(17/78) Purging py3-parsing-pyc (3.1.2-r1)
(18/78) Purging runuser (2.40.1-r1)
(19/78) Purging setpriv (2.40.1-r1)
(20/78) Purging soxr (0.1.3-r7)
(21/78) Purging speexdsp (1.2.1-r2)
(22/78) Purging tdb-libs (1.4.9-r1)
(23/78) Purging umount (2.40.1-r1)
(24/78) Purging util-linux-misc (2.40.1-r1)
(25/78) Purging setarch (2.40.1-r1)
(26/78) Purging util-linux-openrc (2.40.1-r1)
(27/78) Purging uuidgen (2.40.1-r1)
(28/78) Purging wipefs (2.40.1-r1)
(29/78) Purging libsndfile (1.2.2-r1)
(30/78) Purging alsa-lib (1.2.11-r0)
(31/78) Purging glib-dev (2.80.5-r0)
(32/78) Purging bzip2-dev (1.0.8-r6)
(33/78) Purging docbook-xsl (1.79.2-r9)
Executing docbook-xsl-1.79.2-r9.pre-deinstall
(34/78) Purging docbook-xml (4.5-r9)
Executing docbook-xml-4.5-r9.pre-deinstall
(35/78) Purging gettext-dev (0.22.5-r0)
(36/78) Purging xz (5.6.2-r0)
(37/78) Purging gettext-asprintf (0.22.5-r0)
(38/78) Purging gettext (0.22.5-r0)
(39/78) Purging gettext-envsubst (0.22.5-r0)
(40/78) Purging libxml2-utils (2.12.7-r0)
(41/78) Purging libxslt (1.1.39-r1)
(42/78) Purging py3-packaging (24.0-r1)
(43/78) Purging py3-parsing (3.1.2-r1)
(44/78) Purging pcre2-dev (10.43-r0)
(45/78) Purging zlib-dev (1.3.1-r1)
(46/78) Purging libpcre2-16 (10.43-r0)
(47/78) Purging libpcre2-32 (10.43-r0)
(48/78) Purging libedit-dev (20240517.3.1-r0)
(49/78) Purging ncurses-dev (6.4_p20240420-r2)
(50/78) Purging libncurses++ (6.4_p20240420-r2)
(51/78) Purging bsd-compat-headers (0.7.2-r6)
(52/78) Purging dbus-libs (1.14.10-r1)
(53/78) Purging gettext-libs (0.22.5-r0)
(54/78) Purging glib (2.80.5-r0)
(55/78) Purging libasyncns (0.8-r3)
(56/78) Purging libcap-ng (0.8.5-r0)
(57/78) Purging libffi-dev (3.4.6-r0)
(58/78) Purging linux-headers (6.6-r0)
(59/78) Purging libflac (1.4.3-r1)
(60/78) Purging libformw (6.4_p20240420-r2)
(61/78) Purging libgcrypt (1.10.3-r0)
(62/78) Purging libgpg-error (1.49-r0)
(63/78) Purging libintl (0.22.5-r0)
(64/78) Purging libltdl (2.4.7-r3)
(65/78) Purging libmenuw (6.4_p20240420-r2)
(66/78) Purging libvorbis (1.3.7-r2)
(67/78) Purging libogg (1.3.5-r5)
(68/78) Purging libx11 (1.8.9-r1)
(69/78) Purging libxcb (1.16.1-r0)
(70/78) Purging libxau (1.0.11-r4)
(71/78) Purging libxdmcp (1.1.5-r1)
(72/78) Purging libxml2 (2.12.7-r0)
(73/78) Purging opus (1.5.2-r0)
(74/78) Purging orc (0.4.40-r0)
(75/78) Purging util-linux-dev (2.40.1-r1)
(76/78) Purging util-linux (2.40.1-r1)
(77/78) Purging sqlite-dev (3.45.3-r1)
(78/78) Purging sqlite (3.45.3-r1)
Executing busybox-1.36.1-r29.trigger
OK: 662 MiB in 195 packages
+ cmake -B build-wdye -S tools/wdye
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Could NOT find Curses (missing: CURSES_LIBRARY CURSES_INCLUDE_PATH)
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.2.0")
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (0.7s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build-wdye
+ cmake --build build-wdye
[ 50%] Building C object CMakeFiles/wdye.dir/wdye.c.o
[100%] Linking C executable wdye
[100%] Built target wdye
Deploy log