- Project
- p/liberty
- Commit
- f04cc2c61e1a00db4d1af1bb55ca7e20b9c3db23
- Runner
- Alpine 3.19
- State
- Success
- Notified
- 1
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7l[2J[0mSeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
[2Je%@)0(B[0;37;40m[?25l[2J[23;16HAlpine will be booted automatically in [0;1m1[0m seconds[23;16H[0;37;40mAlpine will be booted automatically in [0;1;37;40m1[0;37;40m seconds..[23;16H [23;16H[0;37;40m [?25h[24;1H[0m
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loadin.g initramfs-virt...ookk
c[?7l[2J[ 0.000000] Linux version 6.6.14-0-virt (buildozer@build-3-19-x86_64) (gcc (Alpine 13.2.1_git20231014) 13.2.1 20231014, GNU ld (GNU Binutils) 2.41) #1-Alpine SMP PREEMPT_DYNAMIC Fri, 26 Jan 2024 11:08:07 +0000
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1602511947 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000008] tsc: Detected 1696.074 MHz processor
[ 0.001079] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001115] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001119] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001328] RAMDISK: [mem 0x7f6f7000-0x7ffd9fff]
[ 0.001332] ACPI: Early table checksum verification disabled
[ 0.001337] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[ 0.001345] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001354] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001363] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001370] ACPI: FACS 0x000000007FFE0000 000040
[ 0.001375] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001381] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001387] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001391] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[ 0.001394] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[ 0.001395] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.001397] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[ 0.001398] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[ 0.001399] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[ 0.001491] Zone ranges:
[ 0.001492] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.001496] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.001498] Normal empty
[ 0.001500] Movable zone start for each node
[ 0.001501] Early memory node ranges
[ 0.001501] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.001504] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.001506] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.001901] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.001930] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.011705] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.012385] ACPI: PM-Timer IO Port: 0x608
[ 0.012406] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.012466] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.012472] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.012475] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.012477] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.012479] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.012480] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.012488] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.012490] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.012498] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.012522] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.012544] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.012546] Booting paravirtualized kernel on KVM
[ 0.012548] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.019341] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.019970] percpu: Embedded 57 pages/cpu s195048 r8192 d30232 u1048576
[ 0.020017] kvm-guest: PV spinlocks disabled, no host support
[ 0.020019] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.020103] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.020683] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.021167] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.021266] Built 1 zonelists, mobility grouping on. Total pages: 515802
[ 0.021906] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.028450] Memory: 2017148K/2096608K available (12288K kernel code, 1744K rwdata, 8008K rodata, 2636K init, 2300K bss, 79200K reserved, 0K cma-reserved)
[ 0.039427] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.039583] Kernel/User page tables isolation: enabled
[ 0.040780] Dynamic Preempt: none
[ 0.040922] rcu: Preemptible hierarchical RCU implementation.
[ 0.040923] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.040925] Trampoline variant of Tasks RCU enabled.
[ 0.040926] Tracing variant of Tasks RCU enabled.
[ 0.040927] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.040928] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.045903] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.046166] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.046361] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.054251] Console: colour VGA+ 80x25
[ 0.054314] printk: console [ttyS0] enabled
[ 0.236725] ACPI: Core revision 20230628
[ 0.238544] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.241662] APIC: Switch to symmetric I/O mode setup
[ 0.243710] x2apic enabled
[ 0.245120] APIC: Switched APIC routing to: physical x2apic
[ 0.248730] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.250736] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.253906] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960740)
[ 0.256128] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.257478] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.258982] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.261143] Spectre V2 : Mitigation: Retpolines
[ 0.263905] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.266015] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.267729] Speculative Store Bypass: Vulnerable
[ 0.268906] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.270555] MMIO Stale Data: Unknown: No mitigations
[ 0.271831] x86/fpu: x87 FPU will use FXSAVE
[ 0.295304] Freeing SMP alternatives memory: 32K
[ 0.296501] pid_max: default: 32768 minimum: 301
[ 0.298645] LSM: initializing lsm=capability,landlock,lockdown,integrity
[ 0.302326] landlock: Up and running.
[ 0.303769] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.303910] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.429783] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.433181] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.433901] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.433901] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.433945] signal: max sigframe size: 1440
[ 0.435380] rcu: Hierarchical SRCU implementation.
[ 0.436929] rcu: Max phase no-delay instances is 1000.
[ 0.439020] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.441034] smp: Bringing up secondary CPUs ...
[ 0.444010] smpboot: x86: Booting SMP configuration:
[ 0.445615] .... node #0, CPUs: #1
[ 0.456703] smp: Brought up 1 node, 2 CPUs
[ 0.456703] smpboot: Max logical packages: 1
[ 0.457993] ----------------
[ 0.463909] | NMI testsuite:
[ 0.464850] --------------------
[ 0.465905] remote IPI: ok |
[ 0.466984] local IPI: ok |
[ 0.468050] --------------------
[ 0.469055] Good, all 2 testcases passed! |
[ 0.470161] ---------------------------------
[ 0.471273] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.473358] devtmpfs: initialized
[ 0.473989] x86/mm: Memory block size: 128MB
[ 0.475523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.476497] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.480067] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.484035] audit: initializing netlink subsys (disabled)
[ 0.485492] audit: type=2000 audit(1712748163.054:1): state=initialized audit_enabled=0 res=1
[ 0.485492] thermal_sys: Registered thermal governor 'step_wise'
[ 0.486760] cpuidle: using governor ladder
[ 0.489425] cpuidle: using governor menu
[ 0.490596] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.494340] PCI: Using configuration type 1 for base access
[ 0.495874] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.505130] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.505513] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.507008] ACPI: Added _OSI(Module Device)
[ 0.507008] ACPI: Added _OSI(Processor Device)
[ 0.507008] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.507415] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.514725] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.518017] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.518017] ACPI: Interpreter enabled
[ 0.518017] ACPI: PM: (supports S0 S3 S5)
[ 0.518551] ACPI: Using IOAPIC for interrupt routing
[ 0.523936] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.526885] PCI: Using E820 reservations for host bridge windows
[ 0.528956] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.534726] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.536372] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.538312] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.540749] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.544149] acpiphp: Slot [3] registered
[ 0.545189] acpiphp: Slot [4] registered
[ 0.546250] acpiphp: Slot [5] registered
[ 0.547288] acpiphp: Slot [6] registered
[ 0.548372] acpiphp: Slot [7] registered
[ 0.549553] acpiphp: Slot [8] registered
[ 0.550864] acpiphp: Slot [9] registered
[ 0.552169] acpiphp: Slot [10] registered
[ 0.553515] acpiphp: Slot [11] registered
[ 0.553939] acpiphp: Slot [12] registered
[ 0.555290] acpiphp: Slot [13] registered
[ 0.556620] acpiphp: Slot [14] registered
[ 0.557741] acpiphp: Slot [15] registered
[ 0.559024] acpiphp: Slot [16] registered
[ 0.560358] acpiphp: Slot [17] registered
[ 0.561698] acpiphp: Slot [18] registered
[ 0.563933] acpiphp: Slot [19] registered
[ 0.565259] acpiphp: Slot [20] registered
[ 0.566614] acpiphp: Slot [21] registered
[ 0.567951] acpiphp: Slot [22] registered
[ 0.569413] acpiphp: Slot [23] registered
[ 0.570754] acpiphp: Slot [24] registered
[ 0.572091] acpiphp: Slot [25] registered
[ 0.573443] acpiphp: Slot [26] registered
[ 0.573933] acpiphp: Slot [27] registered
[ 0.575282] acpiphp: Slot [28] registered
[ 0.576617] acpiphp: Slot [29] registered
[ 0.577953] acpiphp: Slot [30] registered
[ 0.579305] acpiphp: Slot [31] registered
[ 0.580637] PCI host bridge to bus 0000:00
[ 0.581987] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.583905] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.586112] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.588545] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.590961] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.593906] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.595774] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.598430] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.601286] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.607583] pci 0000:00:01.1: reg 0x20: [io 0xc120-0xc12f]
[ 0.610810] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.613132] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.613911] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.616234] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.618669] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.621316] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.623920] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.626591] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.633969] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.639785] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 0.651207] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.653233] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.654565] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.657443] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc11f]
[ 0.660629] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 0.668514] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.672824] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.675598] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.678697] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.681699] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 0.689181] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.695533] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.702195] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0ff]
[ 0.705399] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[ 0.716667] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.722106] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.723717] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.724062] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.726152] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.727662] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.729607] iommu: Default domain type: Translated
[ 0.730728] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.732436] SCSI subsystem initialized
[ 0.734082] pps_core: LinuxPPS API ver. 1 registered
[ 0.735424] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.738358] PTP clock support registered
[ 0.738358] PCI: Using ACPI for IRQ routing
[ 0.738358] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.743974] clocksource: Switched to clocksource kvm-clock
[ 0.750848] VFS: Disk quotas dquot_6.6.0
[ 0.751882] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.753562] pnp: PnP ACPI init
[ 0.754774] pnp: PnP ACPI: found 6 devices
[ 0.765669] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.768700] NET: Registered PF_INET protocol family
[ 0.770374] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.774057] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.777010] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.779564] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.782223] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.784683] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.787419] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.789729] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.792178] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.794031] NET: Registered PF_XDP protocol family
[ 0.795615] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.797611] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.799644] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.801876] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.804085] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.806418] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.808320] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.810347] PCI: CLS 0 bytes, default 64
[ 0.811723] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.811848] Unpacking initramfs...
[ 0.815105] Initialise system trusted keyrings
[ 0.817302] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.819412] zbud: loaded
[ 0.820502] Key type asymmetric registered
[ 0.821822] Asymmetric key parser 'x509' registered
[ 0.823412] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.826341] io scheduler mq-deadline registered
[ 0.827810] io scheduler kyber registered
[ 0.829255] io scheduler bfq registered
[ 0.831199] ERST DBG: ERST support is disabled.
[ 0.877614] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.904641] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.933652] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.936889] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.938824] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.947809] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.950481] scsi host0: ata_piix
[ 0.951746] scsi host1: ata_piix
[ 0.952675] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 0.954380] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 0.956288] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.959403] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.960669] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.962033] rtc_cmos 00:05: RTC can wake from S4
[ 0.965059] rtc_cmos 00:05: registered as rtc0
[ 0.966296] rtc_cmos 00:05: setting system clock to 2024-04-10T11:22:43 UTC (1712748163)
[ 0.968484] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.970410] intel_pstate: CPU model not supported
[ 0.971679] Freeing initrd memory: 9100K
[ 0.971818] gre: GRE over IPv4 demultiplexor driver
[ 0.988301] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.991214] Key type dns_resolver registered
[ 0.992420] IPI shorthand broadcast: enabled
[ 0.996094] sched_clock: Marking stable (803469011, 187724055)->(995630298, -4437232)
[ 1.002618] registered taskstats version 1
[ 1.003797] Loading compiled-in X.509 certificates
[ 1.011287] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 1.015588] Key type .fscrypt registered
[ 1.016519] Key type fscrypt-provisioning registered
[ 1.128345] ata2: found unknown device (class 0)
[ 1.131427] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.135678] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.191238] Freeing unused kernel image (initmem) memory: 2636K
[ 1.248060] Write protecting the kernel read-only data: 20480k
[ 1.251883] Freeing unused kernel image (rodata/data gap) memory: 184K
[ 1.255538] rodata_test: all tests were successful
[ 1.258274] Run /init as init process
[ 1.290562] Alpine Init 3.9.1-r0
Alpine Init 3.9.1-r0
[ 1.292622] Loading boot drivers...
* Loading boot drivers: [ 1.337765] ACPI: bus type USB registered
[ 1.339221] usbcore: registered new interface driver usbfs
[ 1.340964] usbcore: registered new interface driver hub
[ 1.342621] usbcore: registered new device driver usb
[ 1.350952] usbcore: registered new interface driver usb-storage
[ 1.543542] loop: module loaded
[ 1.592117] ACPI: bus type drm_connector registered
[ 1.631568] Loading boot drivers: ok.
ok.
[ 1.634582] Mounting root...
* Mounting root: [ 1.675581] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.696348] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.697493] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.701420] [drm] Found EDID data blob.
[ 1.702480] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 1.714703] Console: switching to colour frame buffer device 160x50
[ 1.717125] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.830154] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.833141] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.917541] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 1.923880] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.931246] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 1.933766] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.131445] block sr0: the capability attribute has been deprecated.
[ 5.009728] EXT4-fs (vda): mounted filesystem 82b97a91-8270-4580-9e13-82ce10d47555 ro with ordered data mode. Quota mode: none.
[ 5.015318] Mounting root: ok.
ok.
OpenRC 0.52.1 is starting up Linux 6.6.14-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 6031/46000 files, 165032/184320 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
Cloud-init v. 23.4 running 'init-local' at Wed, 10 Apr 2024 11:22:53 +0000. Up 10.63 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ... [ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
Cloud-init v. 23.4 running 'init' at Wed, 10 Apr 2024 11:23:05 +0000. Up 22.83 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::5054:ff:fe12:3456/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
2024-04-10 11:23:05,464 - log.py[DEPRECATED]: Deprecated cloud-config provided:
chpasswd.list: List of ``username:password`` pairs. Each user will have the corresponding password set. A password can be randomly generated by specifying ``RANDOM`` or ``R`` as a user's password. A hashed password, created by a tool like ``mkpasswd``, can be specified. A regex (``r'\$(1|2a|2y|5|6)(\$.+){2}'``) is used to determine if a password value should be treated as a hash. Deprecated in version 22.2. Use ``users`` instead.
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:lGi1ug0lpZlj1pTehAYrsEi2BMIi5fDZF2LnCc2hg64 root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
|*=o +o=o+o |
|B*.B *o&+o. |
|+.* = /o*o |
| . B *. . |
| . o S |
| . + |
|E . . |
| |
| |
+----[SHA256]-----+
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub
The key fingerprint is:
SHA256:MR91Z+Jm7IlN1i0JnOyejOwyJhpIn31oDkb76PuRR5E root@alpine-ci
The key's randomart image is:
+---[DSA 1024]----+
| oo.o o|
| . .+= *.|
| E .. X o|
| = ..O o |
| . . S..+..+ |
| . + + + o + |
| . B * o. |
| . B.++ . |
| .=++o o |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:+Ze4ii8S5cT8DqjQ6tNx5GRbOLQd7fijGizXdNAmpSI root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| .. |
| . .+. |
| E.++++o |
| .B*++o |
| . ==+oS. |
|. ..++= o+ . . |
| o.oo= +. + o |
|....+ oo. o |
|... oooo.. |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:ZLPJtQQjWavWwUXPj3wM81b/UMXqieUA3Dm9kdnl0h8 root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| .o+oo. o =+|
| .o =oo+ =o+|
| B o.=..E=|
| * B o.B+++|
| o S . o*B.o|
| . .o+..|
| .|
| |
| |
+----[SHA256]-----+
[ ok ]
Cloud-init v. 23.4 running 'modules:config' at Wed, 10 Apr 2024 11:23:07 +0000. Up 24.73 seconds.
2024-04-10 11:23:07,319 - log.py[DEPRECATED]: Config key 'lists' is deprecated in 22.3 and scheduled to be removed in 27.3. Use 'users' instead.
2024-04-10 11:23:07,319 - log.py[DEPRECATED]: The chpasswd multiline string is deprecated in 22.2 and scheduled to be removed in 27.2. Use string type instead.
[ ok ]
Cloud-init v. 23.4 running 'modules:final' at Wed, 10 Apr 2024 11:23:08 +0000. Up 25.98 seconds.
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240226-r0)
Executing busybox-1.36.1-r15.trigger
Executing ca-certificates-20240226-r0.trigger
OK: 147 MiB in 152 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 1024 SHA256:MR91Z+Jm7IlN1i0JnOyejOwyJhpIn31oDkb76PuRR5E root@alpine-ci (DSA)
cloud-init: 256 SHA256:+Ze4ii8S5cT8DqjQ6tNx5GRbOLQd7fijGizXdNAmpSI root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:ZLPJtQQjWavWwUXPj3wM81b/UMXqieUA3Dm9kdnl0h8 root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:lGi1ug0lpZlj1pTehAYrsEi2BMIi5fDZF2LnCc2hg64 root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBJQIt30GtMwTBiRakYugUsQPwXsrxRnlcjBRTz5EHpt0Uc8oOJi1UQrjm1MLGu5/DgmTD5kEBKX8W2dgJlqocW0= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICwo7EtHMZIF3wsvA0bIKq/VEg9hqL/ME8cYeJPsg+5z root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 23.4 finished at Wed, 10 Apr 2024 11:23:10 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net]. Up 28.49 seconds
[ ok ]
Welcome to Alpine Linux 3.19
Kernel 6.6.14-0-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
........
status: done
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.0-r5 -> 2.14.3-r1)
Executing busybox-1.36.1-r15.trigger
Continuing the upgrade transaction with new apk-tools:
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/community/x86_64/APKINDEX.tar.gz
(1/17) Upgrading ca-certificates-bundle (20230506-r0 -> 20240226-r0)
(2/17) Upgrading libcrypto3 (3.1.4-r5 -> 3.1.4-r6)
(3/17) Upgrading libssl3 (3.1.4-r5 -> 3.1.4-r6)
(4/17) Upgrading gnutls (3.8.3-r0 -> 3.8.4-r0)
(5/17) Upgrading libexpat (2.5.0-r2 -> 2.6.2-r0)
(6/17) Upgrading python3 (3.11.6-r1 -> 3.11.8-r0)
(7/17) Upgrading python3-pycache-pyc0 (3.11.6-r1 -> 3.11.8-r0)
(8/17) Upgrading pyc (3.11.6-r1 -> 3.11.8-r0)
(9/17) Installing py3-netifaces (0.11.0-r2)
(10/17) Upgrading py3-certifi (2023.7.22-r0 -> 2024.2.2-r0)
(11/17) Upgrading py3-certifi-pyc (2023.7.22-r0 -> 2024.2.2-r0)
(12/17) Upgrading tzdata (2023d-r0 -> 2024a-r0)
(13/17) Upgrading cloud-init-pyc (23.4-r0 -> 23.4.4-r1)
(14/17) Upgrading python3-pyc (3.11.6-r1 -> 3.11.8-r0)
(15/17) Upgrading cloud-init (23.4-r0 -> 23.4.4-r1)
(16/17) Upgrading cloud-init-openrc (23.4-r0 -> 23.4.4-r1)
(17/17) Upgrading linux-virt (6.6.14-r0 -> 6.6.25-r0)
Executing busybox-1.36.1-r15.trigger
Executing ca-certificates-20240226-r0.trigger
Executing kmod-31-r2.trigger
Executing mkinitfs-3.9.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.25-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 147 MiB in 153 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/8) Installing brotli-libs (1.1.0-r1)
(2/8) Installing c-ares (1.27.0-r0)
(3/8) Installing nghttp2-libs (1.58.0-r0)
(4/8) Installing libcurl (8.5.0-r0)
(5/8) Installing pcre2 (10.42-r2)
(6/8) Installing git (2.43.0-r0)
(7/8) Installing gnu-libiconv-libs (1.17-r2)
(8/8) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r15.trigger
OK: 157 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/liberty.git liberty
Cloning into 'liberty'...
remote: Enumerating objects: 741, done.
remote: Counting objects: 100% (210/210), done.
remote: Compressing objects: 100% (207/207), done.
remote: Total 741 (delta 123), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (741/741), 380.16 KiB | 6.34 MiB/s, done.
Resolving deltas: 100% (444/444), done.
+ cd liberty
+ git -c 'advice.detachedHead=false' checkout f04cc2c61e1a00db4d1af1bb55ca7e20b9c3db23
HEAD is now at f04cc2c Add MinGW-w64 CMake toolchain files
+ doas apk add --no-interactive build-base cmake openssl-dev pulseaudio-dev go nodejs
(1/81) Installing jansson (2.14-r4)
(2/81) Installing binutils (2.41-r0)
(3/81) Installing libmagic (5.45-r1)
(4/81) Installing file (5.45-r1)
(5/81) Installing libgomp (13.2.1_git20231014-r0)
(6/81) Installing libatomic (13.2.1_git20231014-r0)
(7/81) Installing isl26 (0.26-r1)
(8/81) Installing mpfr4 (4.2.1-r0)
(9/81) Installing mpc1 (1.3.1-r1)
(10/81) Installing gcc (13.2.1_git20231014-r0)
(11/81) Installing libstdc++-dev (13.2.1_git20231014-r0)
(12/81) Installing musl-dev (1.2.4_git20230717-r4)
(13/81) Installing libc-dev (0.7.2-r5)
(14/81) Installing g++ (13.2.1_git20231014-r0)
(15/81) Installing make (4.4.1-r2)
(16/81) Installing fortify-headers (1.1-r3)
(17/81) Installing patch (2.7.6-r10)
(18/81) Installing build-base (0.5-r3)
(19/81) Installing lz4-libs (1.9.4-r5)
(20/81) Installing libarchive (3.7.2-r1)
(21/81) Installing rhash-libs (1.4.4-r0)
(22/81) Installing libuv (1.47.0-r0)
(23/81) Installing cmake (3.27.8-r0)
(24/81) Installing go (1.21.9-r0)
(25/81) Installing ada-libs (2.7.4-r0)
(26/81) Installing libbase64 (0.5.0-r0)
(27/81) Installing icu-data-en (74.1-r0)
Executing icu-data-en-74.1-r0.post-install
*
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
*
(28/81) Installing icu-libs (74.1-r0)
(29/81) Installing nodejs (20.12.1-r0)
(30/81) Installing pkgconf (2.1.0-r0)
(31/81) Installing openssl-dev (3.1.4-r6)
(32/81) Installing libintl (0.22.3-r0)
(33/81) Installing glib (2.78.4-r0)
(34/81) Installing libxau (1.0.11-r3)
(35/81) Installing libxdmcp (1.1.4-r3)
(36/81) Installing libxcb (1.16-r0)
(37/81) Installing libx11 (1.8.7-r0)
(38/81) Installing libasyncns (0.8-r2)
(39/81) Installing dbus-libs (1.14.10-r0)
(40/81) Installing libltdl (2.4.7-r3)
(41/81) Installing orc (0.4.34-r0)
(42/81) Installing libogg (1.3.5-r5)
(43/81) Installing libflac (1.4.3-r1)
(44/81) Installing alsa-lib (1.2.10-r0)
(45/81) Installing opus (1.4-r0)
(46/81) Installing libvorbis (1.3.7-r2)
(47/81) Installing libsndfile (1.2.2-r0)
(48/81) Installing soxr (0.1.3-r7)
(49/81) Installing speexdsp (1.2.1-r2)
(50/81) Installing tdb-libs (1.4.9-r0)
(51/81) Installing libpulse (16.1-r11)
(52/81) Installing libpulse-mainloop-glib (16.1-r11)
(53/81) Installing bzip2-dev (1.0.8-r6)
(54/81) Installing libxml2 (2.11.7-r0)
(55/81) Installing libxml2-utils (2.11.7-r0)
(56/81) Installing docbook-xml (4.5-r8)
Executing docbook-xml-4.5-r8.post-install
(57/81) Installing libgpg-error (1.47-r2)
(58/81) Installing libgcrypt (1.10.3-r0)
(59/81) Installing libxslt (1.1.39-r0)
(60/81) Installing docbook-xsl (1.79.2-r8)
Executing docbook-xsl-1.79.2-r8.post-install
(61/81) Installing xz (5.4.5-r0)
(62/81) Installing gettext-asprintf (0.22.3-r0)
(63/81) Installing gettext-libs (0.22.3-r0)
(64/81) Installing gettext-envsubst (0.22.3-r0)
(65/81) Installing gettext (0.22.3-r0)
(66/81) Installing gettext-dev (0.22.3-r0)
(67/81) Installing linux-headers (6.5-r0)
(68/81) Installing libffi-dev (3.4.4-r3)
(69/81) Installing bsd-compat-headers (0.7.2-r5)
(70/81) Installing libformw (6.4_p20231125-r0)
(71/81) Installing libmenuw (6.4_p20231125-r0)
(72/81) Installing libncurses++ (6.4_p20231125-r0)
(73/81) Installing ncurses-dev (6.4_p20231125-r0)
(74/81) Installing libedit-dev (20230828.3.1-r3)
(75/81) Installing zlib-dev (1.3.1-r0)
(76/81) Installing libpcre2-16 (10.42-r2)
(77/81) Installing libpcre2-32 (10.42-r2)
(78/81) Installing pcre2-dev (10.42-r2)
(79/81) Installing util-linux-dev (2.39.3-r0)
(80/81) Installing glib-dev (2.78.4-r0)
(81/81) Installing pulseaudio-dev (16.1-r11)
Executing busybox-1.36.1-r15.trigger
Executing glib-2.78.4-r0.trigger
No schema files found: doing nothing.
OK: 710 MiB in 242 packages
+ cmake -B build
-- The C compiler identification is GNU 13.2.1
-- The CXX compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.1.0")
-- Checking for modules 'libssl;libcrypto'
-- Found libssl, version 3.1.4
-- Found libcrypto, version 3.1.4
-- Checking for module 'libpulse'
-- Found libpulse, version 16.1
CMake Warning at CMakeLists.txt:129 (message):
Cannot test generated protocol code for Swift
-- Configuring done (1.0s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build
+ cmake --build build
[ 4%] [32mBuilding C object CMakeFiles/test-liberty.dir/tests/liberty.c.o[0m
[ 9%] [32m[1mLinking C executable test-liberty[0m
[ 9%] Built target test-liberty
[ 14%] [32mBuilding C object CMakeFiles/test-proto.dir/tests/proto.c.o[0m
In file included from /home/ci/liberty/tests/proto.c:34:
/home/ci/liberty/tests/proto.c: In function 'test_irc':
/home/ci/liberty/tests/../liberty.c:236:29: warning: right-hand operand of comma expression has no effect [-Wunused-value]
236 | ((condition) ? true : \
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
237 | (assertion_failure_handler (g_soft_asserts_are_deadly, \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
238 | __FILE__, __LINE__, __func__, #condition), false))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ci/liberty/tests/proto.c:56:25: note: in expansion of macro 'soft_assert'
56 | soft_assert (!"found unexpected message tag");
| ^~~~~~~~~~~
[ 19%] [32m[1mLinking C executable test-proto[0m
[ 19%] Built target test-proto
[ 23%] [32mBuilding C object CMakeFiles/test-xdg.dir/tests/xdg.c.o[0m
[ 28%] [32m[1mLinking C executable test-xdg[0m
[ 28%] Built target test-xdg
[ 33%] [32mBuilding C object CMakeFiles/test-pulse.dir/tests/pulse.c.o[0m
[ 38%] [32m[1mLinking C executable test-pulse[0m
[ 38%] Built target test-pulse
[ 42%] [34m[1mGenerating man page for libertyxdr[0m
[ 42%] Built target docs
[ 47%] [34m[1mGenerating test protocol code (c)[0m
[ 52%] [34m[1mGenerating test protocol code (cpp)[0m
[ 57%] [34m[1mGenerating test protocol code (go)[0m
[ 61%] [34m[1mGenerating test protocol code (mjs)[0m
[ 66%] [34m[1mGenerating test protocol code (swift)[0m
[ 66%] Built target test-lxdrgen-outputs
[ 71%] [32mBuilding C object CMakeFiles/test-lxdrgen-c.dir/tests/lxdrgen.c.o[0m
[ 76%] [32m[1mLinking C executable test-lxdrgen-c[0m
[ 80%] Built target test-lxdrgen-c
[ 85%] [32mBuilding CXX object CMakeFiles/test-lxdrgen-cpp.dir/tests/lxdrgen.cpp.o[0m
[ 90%] [32mBuilding CXX object CMakeFiles/test-lxdrgen-cpp.dir/tools/lxdrgen-cpp-posix.cpp.o[0m
[ 95%] [32m[1mLinking CXX executable test-lxdrgen-cpp[0m
[100%] Built target test-lxdrgen-cpp
+ cmake --build build -- test
[36mRunning tests...[0m
Test project /home/ci/liberty/build
Start 1: test-liberty
1/9 Test #1: test-liberty ..................... Passed 0.03 sec
Start 2: test-proto
2/9 Test #2: test-proto ....................... Passed 0.01 sec
Start 3: test-xdg
3/9 Test #3: test-xdg ......................... Passed 0.00 sec
Start 4: test-pulse
4/9 Test #4: test-pulse ....................... Passed 0.00 sec
Start 5: test-cmake-parser
5/9 Test #5: test-cmake-parser ................ Passed 0.07 sec
Start 6: test-lxdrgen-c
6/9 Test #6: test-lxdrgen-c ................... Passed 0.00 sec
Start 7: test-lxdrgen-cpp
7/9 Test #7: test-lxdrgen-cpp ................. Passed 0.01 sec
Start 8: test-lxdrgen-go
8/9 Test #8: test-lxdrgen-go .................. Passed 12.40 sec
Start 9: test-lxdrgen-mjs
9/9 Test #9: test-lxdrgen-mjs ................. Passed 0.07 sec
100% tests passed, 0 tests failed out of 9
Total Test time (real) = 12.61 sec