- Created
- 2d ago
- Changed
- 2d ago
- Project
- p/nncmpp
- Commit
- 3361df0ccbecfbc8b33e07c1dbe085643c5418b3
- Runner
- Alpine 3.21
- State
- Success
- Notified
- 1
- Duration
- 1m24s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.21.2-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.21.2-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.21.2-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.12.8-0-virt (buildozer@build-3-21-x86_64) (gcc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1-Alpine SMP PREEMPT_DYNAMIC 2025-01-02 12:14:41
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1679019321 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000010] tsc: Detected 1696.073 MHz processor
[ 0.001101] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001150] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001154] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.017928] found SMP MP-table at [mem 0x000f66f0-0x000f66ff]
[ 0.018218] RAMDISK: [mem 0x7f69b000-0x7ffd9fff]
[ 0.018221] ACPI: Early table checksum verification disabled
[ 0.018226] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[ 0.018233] ACPI: RSDT 0x000000007FFE239C 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.018243] ACPI: FACP 0x000000007FFE2248 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.018253] ACPI: DSDT 0x000000007FFE0040 002208 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.018259] ACPI: FACS 0x000000007FFE0000 000040
[ 0.018265] ACPI: APIC 0x000000007FFE22BC 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.018271] ACPI: HPET 0x000000007FFE233C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.018277] ACPI: WAET 0x000000007FFE2374 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.018281] ACPI: Reserving FACP table memory at [mem 0x7ffe2248-0x7ffe22bb]
[ 0.018284] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2247]
[ 0.018285] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.018286] ACPI: Reserving APIC table memory at [mem 0x7ffe22bc-0x7ffe233b]
[ 0.018288] ACPI: Reserving HPET table memory at [mem 0x7ffe233c-0x7ffe2373]
[ 0.018289] ACPI: Reserving WAET table memory at [mem 0x7ffe2374-0x7ffe239b]
[ 0.018601] Zone ranges:
[ 0.018602] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.018606] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.018608] Normal empty
[ 0.018610] Movable zone start for each node
[ 0.018610] Early memory node ranges
[ 0.018611] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.018614] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.018616] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.018849] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.018882] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.026710] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.027463] ACPI: PM-Timer IO Port: 0x608
[ 0.027490] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.027559] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.027565] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.027568] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.027570] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.027572] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.027573] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.027581] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.027584] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.027599] CPU topo: Max. logical packages: 1
[ 0.027600] CPU topo: Max. logical dies: 1
[ 0.027601] CPU topo: Max. dies per package: 1
[ 0.027609] CPU topo: Max. threads per core: 1
[ 0.027610] CPU topo: Num. cores per package: 2
[ 0.027611] CPU topo: Num. threads per package: 2
[ 0.027612] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[ 0.027638] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.027659] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.027661] Booting paravirtualized kernel on KVM
[ 0.027663] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.035588] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.036059] percpu: Embedded 59 pages/cpu s203992 r8192 d29480 u1048576
[ 0.036105] kvm-guest: PV spinlocks disabled, no host support
[ 0.036106] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.036200] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.036624] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.036954] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.037056] Built 1 zonelists, mobility grouping on. Total pages: 524152
[ 0.037546] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.055507] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.055672] Kernel/User page tables isolation: enabled
[ 0.056978] Dynamic Preempt: none
[ 0.057126] rcu: Preemptible hierarchical RCU implementation.
[ 0.057128] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.057130] Trampoline variant of Tasks RCU enabled.
[ 0.057131] Tracing variant of Tasks RCU enabled.
[ 0.057132] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.057133] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.057146] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.057149] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.066211] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.066466] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.066665] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.075556] Console: colour VGA+ 80x25
[ 0.075625] printk: legacy console [ttyS0] enabled
[ 0.246983] ACPI: Core revision 20240827
[ 0.248563] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.251029] APIC: Switch to symmetric I/O mode setup
[ 0.252816] x2apic enabled
[ 0.254087] APIC: Switched APIC routing to: physical x2apic
[ 0.257623] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.259187] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.261942] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960730)
[ 0.264413] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.265925] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.267588] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.269983] Spectre V2 : Mitigation: Retpolines
[ 0.271943] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.274858] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.277207] Speculative Store Bypass: Vulnerable
[ 0.278865] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.281153] MMIO Stale Data: Unknown: No mitigations
[ 0.281948] x86/fpu: x87 FPU will use FXSAVE
[ 0.312589] Freeing SMP alternatives memory: 36K
[ 0.314280] pid_max: default: 32768 minimum: 301
[ 0.316871] LSM: initializing lsm=lockdown,capability,landlock
[ 0.319993] landlock: Up and running.
[ 0.321538] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.321947] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.447163] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.450194] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.451937] signal: max sigframe size: 1440
[ 0.451937] rcu: Hierarchical SRCU implementation.
[ 0.451937] rcu: Max phase no-delay instances is 1000.
[ 0.451937] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.452312] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.454067] smp: Bringing up secondary CPUs ...
[ 0.455600] smpboot: x86: Booting SMP configuration:
[ 0.456987] .... node #0, CPUs: #1
[ 0.471997] smp: Brought up 1 node, 2 CPUs
[ 0.474254] ----------------
[ 0.475072] | NMI testsuite:
[ 0.475879] --------------------
[ 0.476828] remote IPI: ok |
[ 0.477814] local IPI: ok |
[ 0.478733] --------------------
[ 0.479636] Good, all 2 testcases passed! |
[ 0.480863] ---------------------------------
[ 0.481947] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.484001] Memory: 2009036K/2096608K available (14336K kernel code, 1927K rwdata, 9144K rodata, 2768K init, 1504K bss, 83644K reserved, 0K cma-reserved)
[ 0.488073] devtmpfs: initialized
[ 0.488073] x86/mm: Memory block size: 128MB
[ 0.491959] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.494693] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.498023] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.499880] audit: initializing netlink subsys (disabled)
[ 0.501472] audit: type=2000 audit(1749067353.217:1): state=initialized audit_enabled=0 res=1
[ 0.501472] thermal_sys: Registered thermal governor 'step_wise'
[ 0.501974] cpuidle: using governor ladder
[ 0.504891] cpuidle: using governor menu
[ 0.506143] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.508406] PCI: Using configuration type 1 for base access
[ 0.512196] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.522659] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.524843] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.526577] ACPI: Added _OSI(Module Device)
[ 0.526577] ACPI: Added _OSI(Processor Device)
[ 0.526577] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.531946] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.534485] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.536576] ACPI: Interpreter enabled
[ 0.536576] ACPI: PM: (supports S0 S3 S5)
[ 0.536576] ACPI: Using IOAPIC for interrupt routing
[ 0.541987] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.545207] PCI: Using E820 reservations for host bridge windows
[ 0.547087] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.553033] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.554766] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.556988] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.559758] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.562465] acpiphp: Slot [3] registered
[ 0.563627] acpiphp: Slot [4] registered
[ 0.564765] acpiphp: Slot [5] registered
[ 0.565953] acpiphp: Slot [6] registered
[ 0.567082] acpiphp: Slot [7] registered
[ 0.568222] acpiphp: Slot [8] registered
[ 0.569359] acpiphp: Slot [9] registered
[ 0.570509] acpiphp: Slot [10] registered
[ 0.571982] acpiphp: Slot [11] registered
[ 0.573003] acpiphp: Slot [12] registered
[ 0.574027] acpiphp: Slot [13] registered
[ 0.575047] acpiphp: Slot [14] registered
[ 0.576071] acpiphp: Slot [15] registered
[ 0.577279] acpiphp: Slot [16] registered
[ 0.578445] acpiphp: Slot [17] registered
[ 0.579605] acpiphp: Slot [18] registered
[ 0.580772] acpiphp: Slot [19] registered
[ 0.581973] acpiphp: Slot [20] registered
[ 0.583118] acpiphp: Slot [21] registered
[ 0.584269] acpiphp: Slot [22] registered
[ 0.585428] acpiphp: Slot [23] registered
[ 0.586624] acpiphp: Slot [24] registered
[ 0.587893] acpiphp: Slot [25] registered
[ 0.589051] acpiphp: Slot [26] registered
[ 0.590207] acpiphp: Slot [27] registered
[ 0.591364] acpiphp: Slot [28] registered
[ 0.591974] acpiphp: Slot [29] registered
[ 0.593132] acpiphp: Slot [30] registered
[ 0.594282] acpiphp: Slot [31] registered
[ 0.595439] PCI host bridge to bus 0000:00
[ 0.596645] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.598533] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.600420] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.601947] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.604026] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.606183] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.607920] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.612686] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.616635] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.624250] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.628767] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.631187] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.631944] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.634337] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.636918] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.642422] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.644976] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.647900] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.656196] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.663882] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.676167] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.678241] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.681021] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.683497] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.686553] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.696638] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.700273] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.703731] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.712849] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.716242] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.725356] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.745155] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.749237] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.752944] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.761949] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.774376] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.776694] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.782094] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.783967] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.785569] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.787675] iommu: Default domain type: Translated
[ 0.788876] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.790698] SCSI subsystem initialized
[ 0.792045] pps_core: LinuxPPS API ver. 1 registered
[ 0.793349] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.794214] PTP clock support registered
[ 0.795351] PCI: Using ACPI for IRQ routing
[ 0.795351] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.795351] clocksource: Switched to clocksource kvm-clock
[ 0.795551] VFS: Disk quotas dquot_6.6.0
[ 0.796627] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.798597] pnp: PnP ACPI init
[ 0.799999] pnp: PnP ACPI: found 6 devices
[ 0.812729] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.815126] NET: Registered PF_INET protocol family
[ 0.816496] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.835912] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.838170] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.840362] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.842674] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.844817] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.846876] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.848972] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.850951] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.853233] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.854952] NET: Registered PF_XDP protocol family
[ 0.856468] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.858281] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.860410] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.862829] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.865179] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.867733] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.870107] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.872723] PCI: CLS 0 bytes, default 64
[ 0.874541] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.874695] Unpacking initramfs...
[ 0.878342] Initialise system trusted keyrings
[ 0.880684] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.883212] Key type asymmetric registered
[ 0.884647] Asymmetric key parser 'x509' registered
[ 0.886502] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.889300] io scheduler mq-deadline registered
[ 0.890963] io scheduler kyber registered
[ 0.892527] io scheduler bfq registered
[ 0.895535] ERST DBG: ERST support is disabled.
[ 0.898856] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.903815] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.916099] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.924100] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.926217] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.935809] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.938917] scsi host0: ata_piix
[ 0.940218] scsi host1: ata_piix
[ 0.941248] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.943362] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.945595] hv_vmbus: registering driver hv_netvsc
[ 0.947169] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.951364] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.953168] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.954896] hv_vmbus: registering driver hyperv_keyboard
[ 0.956778] rtc_cmos 00:05: RTC can wake from S4
[ 0.961178] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.965432] rtc_cmos 00:05: registered as rtc0
[ 0.967134] rtc_cmos 00:05: setting system clock to 2025-06-04T20:02:33 UTC (1749067353)
[ 0.970078] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.972645] intel_pstate: CPU model not supported
[ 0.974979] gre: GRE over IPv4 demultiplexor driver
[ 0.977177] NET: Registered PF_INET6 protocol family
[ 0.979948] Segment Routing with IPv6
[ 0.981287] In-situ OAM (IOAM) with IPv6
[ 0.982878] Key type dns_resolver registered
[ 0.984509] IPI shorthand broadcast: enabled
[ 0.990182] sched_clock: Marking stable (810523142, 175460229)->(999084994, -13101623)
[ 1.000257] registered taskstats version 1
[ 1.001984] Loading compiled-in X.509 certificates
[ 1.058576] Freeing initrd memory: 9468K
[ 1.069873] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 1.075221] Key type .fscrypt registered
[ 1.076279] Key type fscrypt-provisioning registered
[ 1.116505] ata2: found unknown device (class 0)
[ 1.118439] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.121527] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.180574] Freeing unused kernel image (initmem) memory: 2768K
[ 1.183116] Write protecting the kernel read-only data: 24576k
[ 1.186973] Freeing unused kernel image (rodata/data gap) memory: 1096K
[ 1.190158] rodata_test: all tests were successful
[ 1.192450] Run /init as init process
[ 1.220751] Alpine Init 3.11.1-r0
Alpine Init 3.11.1-r0
[ 1.224597] Loading boot drivers...
* Loading boot drivers: [ 1.286183] ACPI: bus type USB registered
[ 1.287458] usbcore: registered new interface driver usbfs
[ 1.289091] usbcore: registered new interface driver hub
[ 1.290550] usbcore: registered new device driver usb
[ 1.301299] usbcore: registered new interface driver usb-storage
[ 1.509004] loop: module loaded
[ 1.575401] ACPI: bus type drm_connector registered
[ 1.606237] Loading boot drivers: ok.
ok.
[ 1.609920] Mounting root...
* Mounting root: [ 1.644076] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.645784] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.670235] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.671162] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.674851] [drm] Found EDID data blob.
[ 1.677180] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.690396] Console: switching to colour frame buffer device 160x50
[ 1.693621] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.817803] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.822030] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.931489] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 1.936499] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.944933] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 1.948196] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.091369] block sr0: the capability attribute has been deprecated.
[ 6.018009] EXT4-fs (vda): mounted filesystem 8dd54871-29dc-4dc5-9103-cf8d3d81e40c ro with ordered data mode. Quota mode: none.
[ 6.023667] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.55.1 is starting up Linux 6.12.8-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5527/51200 files, 164508/204800 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 24.3.1 running 'init-local' at Wed, 04 Jun 2025 20:02:44 +0000. Up 12.26 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.1.0 starting
DUID 00:01:00:01:2f:d3:62:e6:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::c6b9:8194:1db2:cfc6/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 24.3.1 running 'init' at Wed, 04 Jun 2025 20:02:59 +0000. Up 26.92 seconds.
ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::c6b9:8194:1db2:cfc6/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | U |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UG |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:DoaqCNW4gVWLH+Dnp1FZ15zXCJDVRN3kCJtoaAGEOwQ root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| E..oo.o o*+*o=o|
| . +o. o +..+++o+|
| +.+.o o o o.. .|
| o *o+ . . |
|. + *.+ S |
| . + = o |
|. o . . |
|o. |
|o |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:VsnP1D2pvqucHc6AtBCV1HFo6RrgCs7bQdZNt94mZZo root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| .oo.+. |
| ..+ B.. ..|
| o.+ B o .o.|
| . o o.+ * o. .|
| o + ..S.+ O. |
| o o .o.oE.o |
| o . o .oo |
| . . . * o |
| +.*. |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:X6mFxLpYUUpuMrRpYiEMezgDcnulgLXCEtpE5UOR6TA root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
|=*B.=+o . . |
|*BEBo= = + |
|O.=+B * = o |
|.= o.+ + + . . |
| S . + |
| o o + |
| . . o |
| |
| |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 24.3.1 running 'modules:config' at Wed, 04 Jun 2025 20:03:00 +0000. Up 28.86 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 24.3.1 running 'modules:final' at Wed, 04 Jun 2025 20:03:02 +0000. Up 30.03 seconds.
2025-06-04 20:03:02,270 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.21/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.21/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20241121-r1)
Executing busybox-1.37.0-r9.trigger
Executing ca-certificates-20241121-r1.trigger
OK: 129 MiB in 143 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:VsnP1D2pvqucHc6AtBCV1HFo6RrgCs7bQdZNt94mZZo root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:X6mFxLpYUUpuMrRpYiEMezgDcnulgLXCEtpE5UOR6TA root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:DoaqCNW4gVWLH+Dnp1FZ15zXCJDVRN3kCJtoaAGEOwQ root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBKEkC2EBObsp5WkK9TShCn4ETEAgLWgQ8ctUjUjwN1bSl5qiyadaz4rzA5W8VyBpJ2pnqbLOrkMhJ567TiQiabc= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHrncoevesmoW2u9Q/7vhdy/9RWUsZ+zoxmsU0rTFvt3 root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.3.1 finished at Wed, 04 Jun 2025 20:03:04 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 32.54 seconds
[ ok ]
Welcome to Alpine Linux 3.21
Kernel 6.12.8-0-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
..........
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.6-r2 -> 2.14.6-r3)
Executing busybox-1.37.0-r9.trigger
Continuing the upgrade transaction with new apk-tools:
(1/46) Upgrading musl (1.2.5-r8 -> 1.2.5-r9)
(2/46) Upgrading busybox (1.37.0-r9 -> 1.37.0-r12)
Executing busybox-1.37.0-r12.post-upgrade
(3/46) Upgrading busybox-binsh (1.37.0-r9 -> 1.37.0-r12)
(4/46) Upgrading busybox-mdev-openrc (1.37.0-r9 -> 1.37.0-r12)
(5/46) Upgrading alpine-release (3.21.2-r0 -> 3.21.3-r0)
(6/46) Upgrading libcrypto3 (3.3.2-r4 -> 3.3.3-r0)
(7/46) Upgrading libssl3 (3.3.2-r4 -> 3.3.3-r0)
(8/46) Upgrading ssl_client (1.37.0-r9 -> 1.37.0-r12)
(9/46) Upgrading busybox-openrc (1.37.0-r9 -> 1.37.0-r12)
(10/46) Upgrading busybox-suid (1.37.0-r9 -> 1.37.0-r12)
(11/46) Upgrading musl-utils (1.2.5-r8 -> 1.2.5-r9)
(12/46) Upgrading alpine-base (3.21.2-r0 -> 3.21.3-r0)
(13/46) Upgrading libffi (3.4.6-r0 -> 3.4.7-r0)
(14/46) Upgrading libtasn1 (4.19.0-r2 -> 4.20.0-r0)
(15/46) Upgrading libblkid (2.40.2-r4 -> 2.40.4-r1)
(16/46) Upgrading blkid (2.40.2-r4 -> 2.40.4-r1)
(17/46) Upgrading libsmartcols (2.40.2-r4 -> 2.40.4-r1)
(18/46) Upgrading partx (2.40.2-r4 -> 2.40.4-r1)
(19/46) Upgrading libuuid (2.40.2-r4 -> 2.40.4-r1)
(20/46) Upgrading libfdisk (2.40.2-r4 -> 2.40.4-r1)
(21/46) Upgrading sfdisk (2.40.2-r4 -> 2.40.4-r1)
(22/46) Upgrading libexpat (2.6.4-r0 -> 2.7.0-r0)
(23/46) Upgrading xz-libs (5.6.3-r0 -> 5.6.3-r1)
(24/46) Upgrading sqlite-libs (3.47.1-r0 -> 3.48.0-r2)
(25/46) Upgrading python3 (3.12.8-r1 -> 3.12.10-r1)
(26/46) Upgrading python3-pycache-pyc0 (3.12.8-r1 -> 3.12.10-r1)
(27/46) Upgrading pyc (3.12.8-r1 -> 3.12.10-r1)
(28/46) Upgrading py3-jinja2 (3.1.5-r0 -> 3.1.6-r0)
(29/46) Upgrading py3-jinja2-pyc (3.1.5-r0 -> 3.1.6-r0)
(30/46) Upgrading tzdata (2024b-r1 -> 2025b-r0)
(31/46) Upgrading python3-pyc (3.12.8-r1 -> 3.12.10-r1)
(32/46) Upgrading dhcpcd (10.1.0-r0 -> 10.1.0-r1)
Executing dhcpcd-10.1.0-r1.post-upgrade
(33/46) Upgrading dhcpcd-openrc (10.1.0-r0 -> 10.1.0-r1)
(34/46) Upgrading device-mapper-libs (2.03.28-r2 -> 2.03.29-r1)
(35/46) Upgrading linux-virt (6.12.8-r0 -> 6.12.31-r0)
(36/46) Upgrading libmount (2.40.2-r4 -> 2.40.4-r1)
(37/46) Upgrading mount (2.40.2-r4 -> 2.40.4-r1)
(38/46) Upgrading openssh-keygen (9.9_p1-r2 -> 9.9_p2-r0)
(39/46) Upgrading openssh-client-common (9.9_p1-r2 -> 9.9_p2-r0)
(40/46) Upgrading openssh-client-default (9.9_p1-r2 -> 9.9_p2-r0)
(41/46) Upgrading openssh-sftp-server (9.9_p1-r2 -> 9.9_p2-r0)
(42/46) Upgrading openssh-server-common (9.9_p1-r2 -> 9.9_p2-r0)
(43/46) Upgrading openssh-server-common-openrc (9.9_p1-r2 -> 9.9_p2-r0)
(44/46) Upgrading openssh-server (9.9_p1-r2 -> 9.9_p2-r0)
Executing openssh-server-9.9_p2-r0.post-upgrade
(45/46) Upgrading openssh (9.9_p1-r2 -> 9.9_p2-r0)
(46/46) Upgrading openssh-server-pam (9.9_p1-r2 -> 9.9_p2-r0)
Executing busybox-1.37.0-r12.trigger
Executing ca-certificates-20241121-r1.trigger
Executing kmod-33-r2.trigger
Executing mkinitfs-3.11.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.12.31-0-virt
Executing syslinux-6.04_pre1-r16.trigger
/boot is device /dev/vda
OK: 129 MiB in 143 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.34.5-r0)
(3/10) Installing nghttp2-libs (1.64.0-r0)
(4/10) Installing libpsl (0.21.5-r3)
(5/10) Installing libcurl (8.12.1-r1)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.47.2-r0)
(8/10) Installing git-init-template (2.47.2-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.37.0-r12.trigger
OK: 139 MiB in 153 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/nncmpp.git nncmpp
Cloning into 'nncmpp'...
remote: Enumerating objects: 1133, done.
remote: Counting objects: 100% (427/427), done.
remote: Compressing objects: 100% (425/425), done.
remote: Total 1133 (delta 279), reused 0 (delta 0), pack-reused 706 (from 1)
Receiving objects: 100% (1133/1133), 793.77 KiB | 8.35 MiB/s, done.
Resolving deltas: 100% (731/731), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Submodule 'termo' (https://git.janouch.name/p/termo.git) registered for path 'termo'
Cloning into '/home/ci/nncmpp/liberty'...
remote: Enumerating objects: 894, done.
remote: Counting objects: 100% (363/363), done.
remote: Compressing objects: 100% (360/360), done.
remote: Total 894 (delta 230), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (894/894), 435.06 KiB | 6.91 MiB/s, done.
Resolving deltas: 100% (551/551), done.
Cloning into '/home/ci/nncmpp/termo'...
remote: Enumerating objects: 1977, done.
remote: Counting objects: 100% (38/38), done.
remote: Compressing objects: 100% (37/37), done.
remote: Total 1977 (delta 14), reused 0 (delta 0), pack-reused 1939 (from 1)
Receiving objects: 100% (1977/1977), 1.38 MiB | 9.81 MiB/s, done.
Resolving deltas: 100% (1259/1259), done.
Submodule path 'liberty': checked out 'd8f785eae54d2b9898cc4a6b8d3c96957161538a'
Submodule path 'termo': checked out 'f9a102456fa6a0b43a916ceaf031f21ea5665e6e'
+ cd nncmpp
+ git -c 'advice.detachedHead=false' checkout 3361df0ccbecfbc8b33e07c1dbe085643c5418b3
HEAD is now at 3361df0 Bump liberty
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=2.1.1-13-g3361df0
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/2.1.1-13-g3361df0/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake asciidoctor rsvg-convert libunistring-dev ncurses-dev curl-dev fftw-dev pulseaudio-dev libx11-dev libxft-dev libpng-dev
(1/134) Installing ruby-libs (3.3.8-r0)
(2/134) Installing libucontext (1.3.2-r0)
(3/134) Installing ruby (3.3.8-r0)
(4/134) Installing asciidoctor (2.0.23-r0)
(5/134) Installing jansson (2.14-r4)
(6/134) Installing binutils (2.43.1-r2)
(7/134) Installing libmagic (5.46-r2)
(8/134) Installing file (5.46-r2)
(9/134) Installing libgomp (14.2.0-r4)
(10/134) Installing libatomic (14.2.0-r4)
(11/134) Installing isl26 (0.26-r1)
(12/134) Installing mpfr4 (4.2.1-r0)
(13/134) Installing mpc1 (1.3.1-r1)
(14/134) Installing gcc (14.2.0-r4)
(15/134) Installing libstdc++-dev (14.2.0-r4)
(16/134) Installing musl-dev (1.2.5-r9)
(17/134) Installing g++ (14.2.0-r4)
(18/134) Installing make (4.4.1-r2)
(19/134) Installing fortify-headers (1.1-r5)
(20/134) Installing patch (2.7.6-r10)
(21/134) Installing build-base (0.5-r3)
(22/134) Installing acl-libs (2.3.2-r1)
(23/134) Installing lz4-libs (1.10.0-r0)
(24/134) Installing libarchive (3.8.1-r0)
(25/134) Installing rhash-libs (1.4.5-r0)
(26/134) Installing libuv (1.49.2-r0)
(27/134) Installing cmake (3.31.1-r0)
(28/134) Installing brotli (1.1.0-r2)
(29/134) Installing pkgconf (2.3.0-r0)
(30/134) Installing brotli-dev (1.1.0-r2)
(31/134) Installing c-ares-dev (1.34.5-r0)
(32/134) Installing libidn2-dev (2.3.7-r0)
(33/134) Installing libpsl-utils (0.21.5-r3)
(34/134) Installing libpsl-dev (0.21.5-r3)
(35/134) Installing nghttp2-dev (1.64.0-r0)
(36/134) Installing openssl-dev (3.3.3-r0)
(37/134) Installing zlib-dev (1.3.1-r2)
(38/134) Installing zstd (1.5.6-r2)
(39/134) Installing zstd-dev (1.5.6-r2)
(40/134) Installing curl-dev (8.12.1-r1)
(41/134) Installing fftw-double-libs (3.3.10-r6)
(42/134) Installing fftw-long-double-libs (3.3.10-r6)
(43/134) Installing fftw-single-libs (3.3.10-r6)
(44/134) Installing fftw-dev (3.3.10-r6)
(45/134) Installing libpng (1.6.47-r0)
(46/134) Installing libpng-dev (1.6.47-r0)
(47/134) Installing libunistring-dev (1.2-r0)
(48/134) Installing libxau (1.0.11-r4)
(49/134) Installing xorgproto (2024.1-r0)
(50/134) Installing libxau-dev (1.0.11-r4)
(51/134) Installing xcb-proto (1.17.0-r0)
(52/134) Installing xcb-proto-pyc (1.17.0-r0)
(53/134) Installing libxdmcp (1.1.5-r1)
(54/134) Installing libxcb (1.16.1-r0)
(55/134) Installing libxdmcp-dev (1.1.5-r1)
(56/134) Installing libxcb-dev (1.16.1-r0)
(57/134) Installing xtrans (1.5.2-r0)
(58/134) Installing libx11 (1.8.10-r0)
(59/134) Installing libx11-dev (1.8.10-r0)
(60/134) Installing libxrender (0.9.11-r5)
(61/134) Installing freetype (2.13.3-r0)
(62/134) Installing fontconfig (2.15.0-r1)
(63/134) Installing libxft (2.3.8-r3)
(64/134) Installing expat (2.7.0-r0)
(65/134) Installing expat-dev (2.7.0-r0)
(66/134) Installing bzip2-dev (1.0.8-r6)
(67/134) Installing freetype-dev (2.13.3-r0)
(68/134) Installing fontconfig-dev (2.15.0-r1)
(69/134) Installing libxrender-dev (0.9.11-r5)
(70/134) Installing libxft-dev (2.3.8-r3)
(71/134) Installing libformw (6.5_p20241006-r3)
(72/134) Installing libmenuw (6.5_p20241006-r3)
(73/134) Installing libncurses++ (6.5_p20241006-r3)
(74/134) Installing ncurses-dev (6.5_p20241006-r3)
(75/134) Installing libintl (0.22.5-r0)
(76/134) Installing glib (2.82.5-r0)
(77/134) Installing libasyncns (0.8-r4)
(78/134) Installing dbus-libs (1.14.10-r4)
(79/134) Installing libltdl (2.4.7-r3)
(80/134) Installing orc (0.4.40-r1)
(81/134) Installing libogg (1.3.5-r5)
(82/134) Installing libflac (1.4.3-r1)
(83/134) Installing alsa-lib (1.2.12-r0)
(84/134) Installing lame-libs (3.100-r5)
(85/134) Installing mpg123-libs (1.32.9-r0)
(86/134) Installing opus (1.5.2-r1)
(87/134) Installing libvorbis (1.3.7-r2)
(88/134) Installing libsndfile (1.2.2-r2)
(89/134) Installing soxr (0.1.3-r7)
(90/134) Installing speexdsp (1.2.1-r2)
(91/134) Installing tdb-libs (1.4.12-r0)
(92/134) Installing libpulse (17.0-r4)
(93/134) Installing libpulse-mainloop-glib (17.0-r4)
(94/134) Installing libxml2 (2.13.4-r6)
(95/134) Installing libxml2-utils (2.13.4-r6)
(96/134) Installing docbook-xml (4.5-r9)
Executing docbook-xml-4.5-r9.post-install
(97/134) Installing libgpg-error (1.51-r0)
(98/134) Installing libgcrypt (1.10.3-r1)
(99/134) Installing libxslt (1.1.42-r2)
(100/134) Installing docbook-xsl-ns (1.79.2-r11)
Executing docbook-xsl-ns-1.79.2-r11.post-install
(101/134) Installing docbook-xsl-nons (1.79.2-r11)
Executing docbook-xsl-nons-1.79.2-r11.post-install
(102/134) Installing docbook-xsl (1.79.2-r11)
(103/134) Installing xz (5.6.3-r1)
(104/134) Installing gettext-asprintf (0.22.5-r0)
(105/134) Installing gettext-libs (0.22.5-r0)
(106/134) Installing gettext-envsubst (0.22.5-r0)
(107/134) Installing gettext (0.22.5-r0)
(108/134) Installing gettext-dev (0.22.5-r0)
(109/134) Installing py3-parsing (3.1.4-r0)
(110/134) Installing py3-parsing-pyc (3.1.4-r0)
(111/134) Installing py3-packaging (24.2-r0)
(112/134) Installing py3-packaging-pyc (24.2-r0)
(113/134) Installing linux-headers (6.6-r1)
(114/134) Installing libffi-dev (3.4.7-r0)
(115/134) Installing bsd-compat-headers (0.7.2-r6)
(116/134) Installing libedit-dev (20240808.3.1-r0)
(117/134) Installing libpcre2-16 (10.43-r0)
(118/134) Installing libpcre2-32 (10.43-r0)
(119/134) Installing pcre2-dev (10.43-r0)
(120/134) Installing liblastlog2 (2.40.4-r1)
(121/134) Installing sqlite (3.48.0-r2)
(122/134) Installing sqlite-dev (3.48.0-r2)
(123/134) Installing util-linux-dev (2.40.4-r1)
(124/134) Installing glib-dev (2.82.5-r0)
(125/134) Installing pulseaudio-dev (17.0-r4)
(126/134) Installing libxext (1.3.6-r2)
(127/134) Installing pixman (0.43.4-r1)
(128/134) Installing cairo (1.18.4-r0)
(129/134) Installing libdav1d (1.5.0-r0)
(130/134) Installing fribidi (1.0.16-r0)
(131/134) Installing graphite2 (1.3.14-r6)
(132/134) Installing harfbuzz (9.0.0-r1)
(133/134) Installing pango (1.54.0-r1)
(134/134) Installing rsvg-convert (2.59.2-r0)
Executing busybox-1.37.0-r12.trigger
Executing glib-2.82.5-r0.trigger
No schema files found: doing nothing.
OK: 559 MiB in 287 packages
+ cmake -B build '-DBUILD_TESTING=ON'
-- The C compiler identification is GNU 14.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.3.0")
-- Found Ncursesw: ncursesw
-- Found Unistring: /usr/include
-- Checking for module 'libcurl'
-- Found libcurl, version 8.12.1
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found Curses: /usr/lib/libcurses.so
-- Checking for modules 'glib-2.0;gio-2.0'
-- Found glib-2.0, version 2.82.5
-- Found gio-2.0, version 2.82.5
-- Checking for module 'unibilium>=0.1.0'
-- Package 'unibilium' not found
-- Checking for modules 'fftw3;fftw3f'
-- Found fftw3, version 3.3.10
-- Found fftw3f, version 3.3.10
-- Checking for module 'libpulse'
-- Found libpulse, version 17.0
-- Checking for modules 'x11;xrender;xft;fontconfig;libpng'
-- Found x11, version 1.8.10
-- Found xrender, version 0.9.11
-- Found xft, version 2.3.8
-- Found fontconfig, version 2.15.0
-- Found libpng, version 1.6.47
-- Looking for resizeterm
-- Looking for resizeterm - found
-- Configuring done (2.2s)
-- Generating done (0.1s)
-- Build files have been written to: /home/ci/nncmpp/build
+ cmake --build build -- package
[ 9%] Building C object termo/CMakeFiles/termo-static.dir/termo.c.o
[ 18%] Building C object termo/CMakeFiles/termo-static.dir/driver-csi.c.o
[ 27%] Building C object termo/CMakeFiles/termo-static.dir/driver-ti.c.o
[ 36%] Linking C static library libtermo-0.a
[ 36%] Built target termo-static
[ 45%] Generating nncmpp-actions.h
[ 54%] Building C object CMakeFiles/nncmpp.dir/nncmpp.c.o
[ 63%] Linking C executable nncmpp
[ 63%] Built target nncmpp
[ 72%] Generating nncmpp 16x16 application icon
[ 81%] Generating nncmpp 32x32 application icon
[ 90%] Generating nncmpp 48x48 application icon
[ 90%] Built target icons
[100%] Generating man page for nncmpp
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: nncmpp
CPack: - Install project: nncmpp []
CPack: Create package
CPack: - package: /home/ci/nncmpp/build/nncmpp-2.1.1-13-g3361df0-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: nncmpp
CPack: - Install project: nncmpp []
CPack: Create package
CPack: - package: /home/ci/nncmpp/build/nncmpp-2.1.1-13-g3361df0-Linux-x86_64.zip generated.
+ cmake --build build -- test
Running tests...
gmake[1]: Entering directory '/home/ci/nncmpp/build/termo'
[ 1%] Building C object termo/CMakeFiles/termo.dir/termo.c.o
[ 3%] Building C object termo/CMakeFiles/termo.dir/driver-csi.c.o
[ 5%] Building C object termo/CMakeFiles/termo.dir/driver-ti.c.o
[ 7%] Linking C shared library libtermo-0.so
[ 7%] Built target termo
[ 14%] Built target termo-static
[ 16%] Building C object termo/CMakeFiles/test-01base.dir/tests/01base.c.o
[ 17%] Building C object termo/CMakeFiles/test-01base.dir/tests/taplib.c.o
[ 19%] Linking C executable test-01base
[ 19%] Built target test-01base
[ 21%] Building C object termo/CMakeFiles/test-02getkey.dir/tests/02getkey.c.o
[ 23%] Building C object termo/CMakeFiles/test-02getkey.dir/tests/taplib.c.o
[ 25%] Linking C executable test-02getkey
[ 25%] Built target test-02getkey
[ 26%] Building C object termo/CMakeFiles/test-03utf8.dir/tests/03utf8.c.o
[ 28%] Building C object termo/CMakeFiles/test-03utf8.dir/tests/taplib.c.o
[ 30%] Linking C executable test-03utf8
[ 30%] Built target test-03utf8
[ 32%] Building C object termo/CMakeFiles/test-04flags.dir/tests/04flags.c.o
[ 33%] Building C object termo/CMakeFiles/test-04flags.dir/tests/taplib.c.o
[ 35%] Linking C executable test-04flags
[ 35%] Built target test-04flags
[ 37%] Building C object termo/CMakeFiles/test-05read.dir/tests/05read.c.o
[ 39%] Building C object termo/CMakeFiles/test-05read.dir/tests/taplib.c.o
[ 41%] Linking C executable test-05read
[ 41%] Built target test-05read
[ 42%] Building C object termo/CMakeFiles/test-06buffer.dir/tests/06buffer.c.o
[ 44%] Building C object termo/CMakeFiles/test-06buffer.dir/tests/taplib.c.o
[ 46%] Linking C executable test-06buffer
[ 46%] Built target test-06buffer
[ 48%] Building C object termo/CMakeFiles/test-10keyname.dir/tests/10keyname.c.o
[ 50%] Building C object termo/CMakeFiles/test-10keyname.dir/tests/taplib.c.o
[ 51%] Linking C executable test-10keyname
[ 51%] Built target test-10keyname
[ 53%] Building C object termo/CMakeFiles/test-11strfkey.dir/tests/11strfkey.c.o
[ 55%] Building C object termo/CMakeFiles/test-11strfkey.dir/tests/taplib.c.o
[ 57%] Linking C executable test-11strfkey
[ 57%] Built target test-11strfkey
[ 58%] Building C object termo/CMakeFiles/test-12strpkey.dir/tests/12strpkey.c.o
[ 60%] Building C object termo/CMakeFiles/test-12strpkey.dir/tests/taplib.c.o
[ 62%] Linking C executable test-12strpkey
[ 62%] Built target test-12strpkey
[ 64%] Building C object termo/CMakeFiles/test-13cmpkey.dir/tests/13cmpkey.c.o
[ 66%] Building C object termo/CMakeFiles/test-13cmpkey.dir/tests/taplib.c.o
[ 67%] Linking C executable test-13cmpkey
[ 67%] Built target test-13cmpkey
[ 69%] Building C object termo/CMakeFiles/test-20canon.dir/tests/20canon.c.o
[ 71%] Building C object termo/CMakeFiles/test-20canon.dir/tests/taplib.c.o
[ 73%] Linking C executable test-20canon
[ 73%] Built target test-20canon
[ 75%] Building C object termo/CMakeFiles/test-30mouse.dir/tests/30mouse.c.o
[ 76%] Building C object termo/CMakeFiles/test-30mouse.dir/tests/taplib.c.o
[ 78%] Linking C executable test-30mouse
[ 78%] Built target test-30mouse
[ 80%] Building C object termo/CMakeFiles/test-31position.dir/tests/31position.c.o
[ 82%] Building C object termo/CMakeFiles/test-31position.dir/tests/taplib.c.o
[ 83%] Linking C executable test-31position
[ 83%] Built target test-31position
[ 85%] Building C object termo/CMakeFiles/test-32modereport.dir/tests/32modereport.c.o
[ 87%] Building C object termo/CMakeFiles/test-32modereport.dir/tests/taplib.c.o
[ 89%] Linking C executable test-32modereport
[ 89%] Built target test-32modereport
[ 91%] Building C object termo/CMakeFiles/test-33focus.dir/tests/33focus.c.o
[ 92%] Building C object termo/CMakeFiles/test-33focus.dir/tests/taplib.c.o
[ 94%] Linking C executable test-33focus
[ 94%] Built target test-33focus
[ 96%] Building C object termo/CMakeFiles/test-39csi.dir/tests/39csi.c.o
[ 98%] Building C object termo/CMakeFiles/test-39csi.dir/tests/taplib.c.o
[100%] Linking C executable test-39csi
[100%] Built target test-39csi
gmake[1]: Leaving directory '/home/ci/nncmpp/build/termo'
Test project /home/ci/nncmpp/build
Start 1: test-xmlwf-nncmpp.svg
1/18 Test #1: test-xmlwf-nncmpp.svg ............ Passed 0.00 sec
Start 2: test-xmllint-nncmpp.svg
2/18 Test #2: test-xmllint-nncmpp.svg .......... Passed 0.00 sec
Start 3: termo.01base
3/18 Test #3: termo.01base ..................... Passed 0.01 sec
Start 4: termo.02getkey
4/18 Test #4: termo.02getkey ................... Passed 0.00 sec
Start 5: termo.03utf8
5/18 Test #5: termo.03utf8 ..................... Passed 0.00 sec
Start 6: termo.04flags
6/18 Test #6: termo.04flags .................... Passed 0.00 sec
Start 7: termo.05read
7/18 Test #7: termo.05read ..................... Passed 0.00 sec
Start 8: termo.06buffer
8/18 Test #8: termo.06buffer ................... Passed 0.00 sec
Start 9: termo.10keyname
9/18 Test #9: termo.10keyname .................. Passed 0.00 sec
Start 10: termo.11strfkey
10/18 Test #10: termo.11strfkey .................. Passed 0.00 sec
Start 11: termo.12strpkey
11/18 Test #11: termo.12strpkey .................. Passed 0.00 sec
Start 12: termo.13cmpkey
12/18 Test #12: termo.13cmpkey ................... Passed 0.00 sec
Start 13: termo.20canon
13/18 Test #13: termo.20canon .................... Passed 0.00 sec
Start 14: termo.30mouse
14/18 Test #14: termo.30mouse .................... Passed 0.00 sec
Start 15: termo.31position
15/18 Test #15: termo.31position ................. Passed 0.00 sec
Start 16: termo.32modereport
16/18 Test #16: termo.32modereport ............... Passed 0.00 sec
Start 17: termo.33focus
17/18 Test #17: termo.33focus .................... Passed 0.00 sec
Start 18: termo.39csi
18/18 Test #18: termo.39csi ...................... Passed 0.00 sec
100% tests passed, 0 tests failed out of 18
Total Test time (real) = 0.09 sec
Deploy log