- Created
- 1d ago
- Changed
- 1d ago
- Project
- p/usb-drivers
- Commit
- d8b01cdaee84276389af7aa0ba32099bad28c7a2
- Runner
- Alpine 3.21
- State
- Failed (Scripts failed)
- Notified
- 1
- Duration
- 1m47s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.21.2-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.21.2-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.21.2-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3FF0+7EF33FF0 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 Hl
. Peter Anvin et al
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.12.8-0-virt (buildozer@build-3-21-x86_64) (gcc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1-Alpine SMP PREEMPT_DYNAMIC 2025-01-02 12:14:41
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-1-1 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000002] kvm-clock: using sched offset of 1753819924 cycles
[ 0.000006] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000013] tsc: Detected 1696.073 MHz processor
[ 0.001177] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001229] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001234] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.019070] found SMP MP-table at [mem 0x000f66d0-0x000f66df]
[ 0.019342] RAMDISK: [mem 0x7f69b000-0x7ffd9fff]
[ 0.019347] ACPI: Early table checksum verification disabled
[ 0.019352] ACPI: RSDP 0x00000000000F6500 000014 (v00 BOCHS )
[ 0.019361] ACPI: RSDT 0x000000007FFE239C 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.019371] ACPI: FACP 0x000000007FFE2248 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.019381] ACPI: DSDT 0x000000007FFE0040 002208 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.019388] ACPI: FACS 0x000000007FFE0000 000040
[ 0.019394] ACPI: APIC 0x000000007FFE22BC 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.019400] ACPI: HPET 0x000000007FFE233C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.019406] ACPI: WAET 0x000000007FFE2374 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.019411] ACPI: Reserving FACP table memory at [mem 0x7ffe2248-0x7ffe22bb]
[ 0.019413] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2247]
[ 0.019415] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.019416] ACPI: Reserving APIC table memory at [mem 0x7ffe22bc-0x7ffe233b]
[ 0.019418] ACPI: Reserving HPET table memory at [mem 0x7ffe233c-0x7ffe2373]
[ 0.019419] ACPI: Reserving WAET table memory at [mem 0x7ffe2374-0x7ffe239b]
[ 0.019745] Zone ranges:
[ 0.019747] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.019751] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.019754] Normal empty
[ 0.019755] Movable zone start for each node
[ 0.019756] Early memory node ranges
[ 0.019757] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.019759] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.019762] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.019985] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.020019] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.028341] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.029120] ACPI: PM-Timer IO Port: 0x608
[ 0.029170] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.029245] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.029252] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.029255] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.029257] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.029259] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.029261] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.029270] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.029272] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.029289] CPU topo: Max. logical packages: 1
[ 0.029290] CPU topo: Max. logical dies: 1
[ 0.029291] CPU topo: Max. dies per package: 1
[ 0.029300] CPU topo: Max. threads per core: 1
[ 0.029301] CPU topo: Num. cores per package: 2
[ 0.029302] CPU topo: Num. threads per package: 2
[ 0.029303] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[ 0.029331] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.029353] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.029355] Booting paravirtualized kernel on KVM
[ 0.029357] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.037970] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.038570] percpu: Embedded 59 pages/cpu s203992 r8192 d29480 u1048576
[ 0.038625] kvm-guest: PV spinlocks disabled, no host support
[ 0.038627] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.038727] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.039197] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.039538] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.039646] Built 1 zonelists, mobility grouping on. Total pages: 524152
[ 0.040198] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.059542] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.059727] Kernel/User page tables isolation: enabled
[ 0.061204] Dynamic Preempt: none
[ 0.061385] rcu: Preemptible hierarchical RCU implementation.
[ 0.061387] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.061390] Trampoline variant of Tasks RCU enabled.
[ 0.061390] Tracing variant of Tasks RCU enabled.
[ 0.061392] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.061393] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.061406] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.061409] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.071255] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.071561] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.071834] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.081746] Console: colour VGA+ 80x25
[ 0.081820] printk: legacy console [ttyS0] enabled
[ 0.280739] ACPI: Core revision 20240827
[ 0.282740] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.285531] APIC: Switch to symmetric I/O mode setup
[ 0.287434] x2apic enabled
[ 0.288820] APIC: Switched APIC routing to: physical x2apic
[ 0.292570] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.294366] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.297438] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960730)
[ 0.300019] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.301956] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.304083] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.307444] Spectre V2 : Mitigation: Retpolines
[ 0.309083] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.312021] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.314409] Speculative Store Bypass: Vulnerable
[ 0.315616] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.317439] MMIO Stale Data: Unknown: No mitigations
[ 0.318693] x86/fpu: x87 FPU will use FXSAVE
[ 0.351813] Freeing SMP alternatives memory: 36K
[ 0.353242] pid_max: default: 32768 minimum: 301
[ 0.356067] LSM: initializing lsm=lockdown,capability,landlock
[ 0.358573] landlock: Up and running.
[ 0.360165] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.362832] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.487829] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.491239] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.494164] signal: max sigframe size: 1440
[ 0.495611] rcu: Hierarchical SRCU implementation.
[ 0.496997] rcu: Max phase no-delay instances is 1000.
[ 0.497560] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.500265] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.502091] smp: Bringing up secondary CPUs ...
[ 0.503625] smpboot: x86: Booting SMP configuration:
[ 0.505066] .... node #0, CPUs: #1
[ 0.517512] smp: Brought up 1 node, 2 CPUs
[ 0.520354] ----------------
[ 0.521404] | NMI testsuite:
[ 0.522446] --------------------
[ 0.523627] remote IPI: ok |
[ 0.524854] local IPI: ok |
[ 0.527444] --------------------
[ 0.528617] Good, all 2 testcases passed! |
[ 0.530107] ---------------------------------
[ 0.531199] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.533132] Memory: 2009036K/2096608K available (14336K kernel code, 1927K rwdata, 9144K rodata, 2768K init, 1504K bss, 83644K reserved, 0K cma-reserved)
[ 0.537727] devtmpfs: initialized
[ 0.538720] x86/mm: Memory block size: 128MB
[ 0.540801] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.540801] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.543728] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.547630] audit: initializing netlink subsys (disabled)
[ 0.549004] audit: type=2000 audit(1753989485.070:1): state=initialized audit_enabled=0 res=1
[ 0.549004] thermal_sys: Registered thermal governor 'step_wise'
[ 0.549894] cpuidle: using governor ladder
[ 0.557455] cpuidle: using governor menu
[ 0.559039] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.561858] PCI: Using configuration type 1 for base access
[ 0.564088] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.577888] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.579932] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.582287] ACPI: Added _OSI(Module Device)
[ 0.582287] ACPI: Added _OSI(Processor Device)
[ 0.582287] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.582287] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.588523] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.590418] ACPI: Interpreter enabled
[ 0.590418] ACPI: PM: (supports S0 S3 S5)
[ 0.590418] ACPI: Using IOAPIC for interrupt routing
[ 0.591118] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.597438] PCI: Using E820 reservations for host bridge windows
[ 0.599301] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.605011] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.607450] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.609400] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.611891] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.615290] acpiphp: Slot [3] registered
[ 0.616466] acpiphp: Slot [4] registered
[ 0.617478] acpiphp: Slot [5] registered
[ 0.618636] acpiphp: Slot [6] registered
[ 0.620233] acpiphp: Slot [7] registered
[ 0.621763] acpiphp: Slot [8] registered
[ 0.623017] acpiphp: Slot [9] registered
[ 0.624347] acpiphp: Slot [10] registered
[ 0.625697] acpiphp: Slot [11] registered
[ 0.627474] acpiphp: Slot [12] registered
[ 0.628760] acpiphp: Slot [13] registered
[ 0.630040] acpiphp: Slot [14] registered
[ 0.631333] acpiphp: Slot [15] registered
[ 0.632637] acpiphp: Slot [16] registered
[ 0.633889] acpiphp: Slot [17] registered
[ 0.635201] acpiphp: Slot [18] registered
[ 0.636403] acpiphp: Slot [19] registered
[ 0.637472] acpiphp: Slot [20] registered
[ 0.638662] acpiphp: Slot [21] registered
[ 0.639857] acpiphp: Slot [22] registered
[ 0.641049] acpiphp: Slot [23] registered
[ 0.642386] acpiphp: Slot [24] registered
[ 0.643583] acpiphp: Slot [25] registered
[ 0.644876] acpiphp: Slot [26] registered
[ 0.646307] acpiphp: Slot [27] registered
[ 0.647475] acpiphp: Slot [28] registered
[ 0.648964] acpiphp: Slot [29] registered
[ 0.650230] acpiphp: Slot [30] registered
[ 0.651592] acpiphp: Slot [31] registered
[ 0.653094] PCI host bridge to bus 0000:00
[ 0.654661] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.657439] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.659883] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.662573] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.665311] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.667442] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.669501] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.673240] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.678485] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.687442] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.691614] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.694502] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.696779] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.697441] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.700037] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.703419] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.705504] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.707894] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.718414] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.725343] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.739998] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.742567] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.746277] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.749080] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.752587] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.765744] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.769165] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.772678] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.782574] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.789778] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.812857] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.821140] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.827449] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.835307] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.849673] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.860704] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.862983] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.864881] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.866832] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.867546] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.869939] iommu: Default domain type: Translated
[ 0.871315] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.873376] SCSI subsystem initialized
[ 0.877632] pps_core: LinuxPPS API ver. 1 registered
[ 0.879322] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.881761] PTP clock support registered
[ 0.882980] PCI: Using ACPI for IRQ routing
[ 0.882980] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.887439] clocksource: Switched to clocksource kvm-clock
[ 0.891701] VFS: Disk quotas dquot_6.6.0
[ 0.892920] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.895346] pnp: PnP ACPI init
[ 0.897204] pnp: PnP ACPI: found 6 devices
[ 0.910976] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.914910] NET: Registered PF_INET protocol family
[ 0.916671] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.937682] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.940642] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.943459] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.946335] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.949223] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.951467] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.954200] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.956777] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.959755] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.961625] NET: Registered PF_XDP protocol family
[ 0.963021] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.964760] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.966578] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.968531] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.970459] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.972527] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.974174] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.975986] PCI: CLS 0 bytes, default 64
[ 0.977290] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.977387] Unpacking initramfs...
[ 0.981483] Initialise system trusted keyrings
[ 0.983703] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.986213] Key type asymmetric registered
[ 0.987760] Asymmetric key parser 'x509' registered
[ 0.989601] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.992394] io scheduler mq-deadline registered
[ 0.994039] io scheduler kyber registered
[ 0.995571] io scheduler bfq registered
[ 1.006739] ERST DBG: ERST support is disabled.
[ 1.010319] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 1.017033] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 1.026121] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 1.030761] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.033391] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.039975] VMware PVSCSI driver - version 1.0.7.0-k
[ 1.055135] scsi host0: ata_piix
[ 1.056994] scsi host1: ata_piix
[ 1.058391] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 1.062861] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 1.066169] hv_vmbus: registering driver hv_netvsc
[ 1.068032] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.073347] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.075053] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.076938] hv_vmbus: registering driver hyperv_keyboard
[ 1.078803] rtc_cmos 00:05: RTC can wake from S4
[ 1.082359] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.086152] rtc_cmos 00:05: registered as rtc0
[ 1.087864] rtc_cmos 00:05: setting system clock to 2025-07-31T19:18:04 UTC (1753989484)
[ 1.090780] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.093353] intel_pstate: CPU model not supported
[ 1.095636] gre: GRE over IPv4 demultiplexor driver
[ 1.097889] NET: Registered PF_INET6 protocol family
[ 1.100934] Segment Routing with IPv6
[ 1.102068] In-situ OAM (IOAM) with IPv6
[ 1.105955] Key type dns_resolver registered
[ 1.107686] IPI shorthand broadcast: enabled
[ 1.113598] sched_clock: Marking stable (900031688, 205854735)->(1105035472, 850951)
[ 1.125683] registered taskstats version 1
[ 1.128162] Loading compiled-in X.509 certificates
[ 1.184071] Freeing initrd memory: 9468K
[ 1.194752] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 1.201247] Key type .fscrypt registered
[ 1.202690] Key type fscrypt-provisioning registered
[ 1.226769] ata2: found unknown device (class 0)
[ 1.229091] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.232341] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.288358] Freeing unused kernel image (initmem) memory: 2768K
[ 1.289809] Write protecting the kernel read-only data: 24576k
[ 1.291891] Freeing unused kernel image (rodata/data gap) memory: 1096K
[ 1.293371] rodata_test: all tests were successful
[ 1.294386] Run /init as init process
[ 1.311523] Alpine Init 3.11.1-r0
Alpine Init 3.11.1-r0
[ 1.313554] Loading boot drivers...
* Loading boot drivers: [ 1.356414] ACPI: bus type USB registered
[ 1.357354] usbcore: registered new interface driver usbfs
[ 1.358501] usbcore: registered new interface driver hub
[ 1.359608] usbcore: registered new device driver usb
[ 1.367465] usbcore: registered new interface driver usb-storage
[ 1.560097] loop: module loaded
[ 1.619546] ACPI: bus type drm_connector registered
[ 1.652232] Loading boot drivers: ok.
ok.
[ 1.655799] Mounting root...
* Mounting root: [ 1.702539] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.704312] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.737068] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.738250] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.742688] [drm] Found EDID data blob.
[ 1.743738] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.758346] Console: switching to colour frame buffer device 160x50
[ 1.761312] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.937259] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.938507] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.045782] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 2.048821] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 2.056228] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 2.059357] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.259675] block sr0: the capability attribute has been deprecated.
[ 5.892463] EXT4-fs (vda): mounted filesystem 8dd54871-29dc-4dc5-9103-cf8d3d81e40c ro with ordered data mode. Quota mode: none.
[ 5.895800] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.55.1 is starting up Linux 6.12.8-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5527/51200 files, 164508/204800 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 24.3.1 running 'init-local' at Thu, 31 Jul 2025 19:18:15 +0000. Up 12.11 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.1.0 starting
DUID 00:01:00:01:30:1e:7d:f9:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::8245:1b65:cd16:58a4/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 24.3.1 running 'init' at Thu, 31 Jul 2025 19:18:33 +0000. Up 29.95 seconds.
ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::8245:1b65:cd16:58a4/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | U |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UG |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:j1ptsW2C5Pi5yuz0+wdbHzQHfK1+hyzaJmivjI2oEno root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| . .|
| o o|
| + |
| + .|
| S . + + |
|. + =.+o = o|
|.. o =.**oo o.|
|o E = Xoo+o+ . |
| o....OoX*o+ |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:a/irRdCrs/FEPUcZBD4KXCOZJv9R296JspPdsJ+Amuk root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| .oo .oo |
| ..++ o. o |
| ++ ..ooo |
| .o.+.o. |
| .S.o..o . |
| =...++ o |
| = = .=.+ |
| X ++ o... |
| ooE. . .o |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:d45goWpcRaipu2KvWDqO+hZmq4jpHeHadW/wMVxqzGo root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| .. |
| .. |
| o o |
| o o . . |
| o o S + . |
| *..o o @ + |
| o.*+. .= + . |
|B=B.o .E.o |
|#@== . .. |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 24.3.1 running 'modules:config' at Thu, 31 Jul 2025 19:18:35 +0000. Up 32.35 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 24.3.1 running 'modules:final' at Thu, 31 Jul 2025 19:18:36 +0000. Up 33.62 seconds.
2025-07-31 19:18:37,099 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.21/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.21/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20250619-r0)
Executing busybox-1.37.0-r9.trigger
Executing ca-certificates-20250619-r0.trigger
OK: 129 MiB in 143 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:a/irRdCrs/FEPUcZBD4KXCOZJv9R296JspPdsJ+Amuk root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:d45goWpcRaipu2KvWDqO+hZmq4jpHeHadW/wMVxqzGo root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:j1ptsW2C5Pi5yuz0+wdbHzQHfK1+hyzaJmivjI2oEno root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBKPUSyTxE7SyslOOgECUWN/j2vAwfhWA342WYX66xCGN9JejzwKaELG9GeUQeOMWcVAYDks5WsnzFCLLK1Bjr2I= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEO0mo1vcmkVIe1+kcTl+a1I9xfTrbh+M0jT/ikUeijN root@alpine-ci
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABgQDNm3Ppj/seFRnIsGkvFLieVejVodthzrbhfiYXFMojucP4wwsDQ2LLZAOrES2PU0npH/MhLaeXi2c5fN1C9BWxCYzsGPkYW5wcsfYgML6rx285IiwAXQAZ4pj4UHnsCjuptm/Va6KIDTpH8JDhTI7IWACteMkHHOU2YNjNIbUzZvA324vMjF/PvtPrvRpHSzfH3HLAb7Gi1R3tsNz1eQVIdeIY/hrW7dyOlpmuRVBF5SuILhu7RTwdn0c3g4MMRwJ2GPZu5/RGzg5MmbbZhpXmNYxAz4yE+ugiW/11Iun1bgN9RDdz/Nf9YtaYiE/9TgIsQGeE2Iy9GMQbxUKX8lNktLCNkRn6M67qBRJlvHsWlTI6hm9wuaRUKcR4IRXeguxKYLYctj5Q3gT5Pf8gCMarR5HCDbMnKAsnYWIXImZ6vjfOey9Bl3z3tm+zizGLlGekra3ynhiYH29NUgVQWd+pSDwy4WMr8bVAryuJO0LExNql84us9NyR7SO5wpW1aac= root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.3.1 finished at Thu, 31 Jul 2025 19:18:39 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 36.38 seconds
[ ok ]
Welcome to Alpine Linux 3.21
Kernel 6.12.8-0-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
.................
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.6-r2 -> 2.14.6-r3)
Executing busybox-1.37.0-r9.trigger
Continuing the upgrade transaction with new apk-tools:
(1/49) Upgrading musl (1.2.5-r8 -> 1.2.5-r9)
(2/49) Upgrading busybox (1.37.0-r9 -> 1.37.0-r12)
Executing busybox-1.37.0-r12.post-upgrade
(3/49) Upgrading busybox-binsh (1.37.0-r9 -> 1.37.0-r12)
(4/49) Upgrading busybox-mdev-openrc (1.37.0-r9 -> 1.37.0-r12)
(5/49) Upgrading alpine-release (3.21.2-r0 -> 3.21.4-r0)
(6/49) Upgrading ca-certificates-bundle (20241121-r1 -> 20250619-r0)
(7/49) Upgrading libcrypto3 (3.3.2-r4 -> 3.3.4-r0)
(8/49) Upgrading libssl3 (3.3.2-r4 -> 3.3.4-r0)
(9/49) Upgrading ssl_client (1.37.0-r9 -> 1.37.0-r12)
(10/49) Upgrading busybox-openrc (1.37.0-r9 -> 1.37.0-r12)
(11/49) Upgrading busybox-suid (1.37.0-r9 -> 1.37.0-r12)
(12/49) Upgrading musl-utils (1.2.5-r8 -> 1.2.5-r9)
(13/49) Upgrading alpine-base (3.21.2-r0 -> 3.21.4-r0)
(14/49) Upgrading libffi (3.4.6-r0 -> 3.4.7-r0)
(15/49) Upgrading libtasn1 (4.19.0-r2 -> 4.20.0-r0)
(16/49) Upgrading libblkid (2.40.2-r4 -> 2.40.4-r1)
(17/49) Upgrading blkid (2.40.2-r4 -> 2.40.4-r1)
(18/49) Upgrading libsmartcols (2.40.2-r4 -> 2.40.4-r1)
(19/49) Upgrading partx (2.40.2-r4 -> 2.40.4-r1)
(20/49) Upgrading libuuid (2.40.2-r4 -> 2.40.4-r1)
(21/49) Upgrading libfdisk (2.40.2-r4 -> 2.40.4-r1)
(22/49) Upgrading sfdisk (2.40.2-r4 -> 2.40.4-r1)
(23/49) Upgrading libexpat (2.6.4-r0 -> 2.7.0-r0)
(24/49) Upgrading xz-libs (5.6.3-r0 -> 5.6.3-r1)
(25/49) Upgrading sqlite-libs (3.47.1-r0 -> 3.48.0-r3)
(26/49) Upgrading python3 (3.12.8-r1 -> 3.12.11-r0)
(27/49) Upgrading python3-pycache-pyc0 (3.12.8-r1 -> 3.12.11-r0)
(28/49) Upgrading pyc (3.12.8-r1 -> 3.12.11-r0)
(29/49) Upgrading py3-jinja2 (3.1.5-r0 -> 3.1.6-r0)
(30/49) Upgrading py3-jinja2-pyc (3.1.5-r0 -> 3.1.6-r0)
(31/49) Upgrading py3-requests (2.32.3-r0 -> 2.32.4-r0)
(32/49) Upgrading py3-requests-pyc (2.32.3-r0 -> 2.32.4-r0)
(33/49) Upgrading tzdata (2024b-r1 -> 2025b-r0)
(34/49) Upgrading python3-pyc (3.12.8-r1 -> 3.12.11-r0)
(35/49) Upgrading dhcpcd (10.1.0-r0 -> 10.1.0-r1)
Executing dhcpcd-10.1.0-r1.post-upgrade
(36/49) Upgrading dhcpcd-openrc (10.1.0-r0 -> 10.1.0-r1)
(37/49) Upgrading device-mapper-libs (2.03.28-r2 -> 2.03.29-r1)
(38/49) Upgrading linux-virt (6.12.8-r0 -> 6.12.40-r0)
(39/49) Upgrading libmount (2.40.2-r4 -> 2.40.4-r1)
(40/49) Upgrading mount (2.40.2-r4 -> 2.40.4-r1)
(41/49) Upgrading openssh-keygen (9.9_p1-r2 -> 9.9_p2-r0)
(42/49) Upgrading openssh-client-common (9.9_p1-r2 -> 9.9_p2-r0)
(43/49) Upgrading openssh-client-default (9.9_p1-r2 -> 9.9_p2-r0)
(44/49) Upgrading openssh-sftp-server (9.9_p1-r2 -> 9.9_p2-r0)
(45/49) Upgrading openssh-server-common (9.9_p1-r2 -> 9.9_p2-r0)
(46/49) Upgrading openssh-server-common-openrc (9.9_p1-r2 -> 9.9_p2-r0)
(47/49) Upgrading openssh-server (9.9_p1-r2 -> 9.9_p2-r0)
Executing openssh-server-9.9_p2-r0.post-upgrade
(48/49) Upgrading openssh (9.9_p1-r2 -> 9.9_p2-r0)
(49/49) Upgrading openssh-server-pam (9.9_p1-r2 -> 9.9_p2-r0)
Executing busybox-1.37.0-r12.trigger
Executing ca-certificates-20250619-r0.trigger
Executing kmod-33-r2.trigger
Executing mkinitfs-3.11.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.12.40-0-virt
Executing syslinux-6.04_pre1-r16.trigger
/boot is device /dev/vda
OK: 129 MiB in 143 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.34.5-r0)
(3/10) Installing nghttp2-libs (1.64.0-r0)
(4/10) Installing libpsl (0.21.5-r3)
(5/10) Installing libcurl (8.12.1-r1)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.47.3-r0)
(8/10) Installing git-init-template (2.47.3-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.37.0-r12.trigger
OK: 139 MiB in 153 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/usb-drivers.git usb-drivers
Cloning into 'usb-drivers'...
remote: Enumerating objects: 130, done.
remote: Counting objects: 100% (130/130), done.
remote: Compressing objects: 100% (129/129), done.
remote: Total 130 (delta 76), reused 0 (delta 0), pack-reused 0 (from 0)
Receiving objects: 100% (130/130), 100.36 KiB | 3.34 MiB/s, done.
Resolving deltas: 100% (76/76), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty) registered for path 'liberty'
Cloning into '/home/ci/usb-drivers/liberty'...
remote: Enumerating objects: 894, done.
remote: Counting objects: 100% (363/363), done.
remote: Compressing objects: 100% (360/360), done.
remote: Total 894 (delta 230), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (894/894), 435.06 KiB | 4.44 MiB/s, done.
Resolving deltas: 100% (551/551), done.
Submodule path 'liberty': checked out '9268fb8eba4a60499809965b3b69c2eb7e3798e7'
+ cd usb-drivers
+ git -c 'advice.detachedHead=false' checkout d8b01cdaee84276389af7aa0ba32099bad28c7a2
HEAD is now at d8b01cd eizoctl: add an option to filter by serial number
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=1.1.0-14-gd8b01cd
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/1.1.0-14-gd8b01cd/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake libusb-dev hidapi-dev
(1/29) Installing jansson (2.14-r4)
(2/29) Installing binutils (2.43.1-r3)
(3/29) Installing libmagic (5.46-r2)
(4/29) Installing file (5.46-r2)
(5/29) Installing libgomp (14.2.0-r4)
(6/29) Installing libatomic (14.2.0-r4)
(7/29) Installing isl26 (0.26-r1)
(8/29) Installing mpfr4 (4.2.1-r0)
(9/29) Installing mpc1 (1.3.1-r1)
(10/29) Installing gcc (14.2.0-r4)
(11/29) Installing libstdc++-dev (14.2.0-r4)
(12/29) Installing musl-dev (1.2.5-r9)
(13/29) Installing g++ (14.2.0-r4)
(14/29) Installing make (4.4.1-r2)
(15/29) Installing fortify-headers (1.1-r5)
(16/29) Installing patch (2.7.6-r10)
(17/29) Installing build-base (0.5-r3)
(18/29) Installing acl-libs (2.3.2-r1)
(19/29) Installing lz4-libs (1.10.0-r0)
(20/29) Installing libarchive (3.8.1-r0)
(21/29) Installing rhash-libs (1.4.5-r0)
(22/29) Installing libuv (1.49.2-r0)
(23/29) Installing cmake (3.31.1-r0)
(24/29) Installing eudev-libs (3.2.14-r5)
(25/29) Installing libusb (1.0.27-r0)
(26/29) Installing hidapi (0.14.0-r0)
(27/29) Installing pkgconf (2.3.0-r0)
(28/29) Installing hidapi-dev (0.14.0-r0)
(29/29) Installing libusb-dev (1.0.27-r0)
Executing busybox-1.37.0-r12.trigger
OK: 426 MiB in 182 packages
+ doas apk add --no-interactive mingw-w64-gcc rsvg-convert icoutils cmake make pkgconf curl libarchive-tools ncurses
(1/50) Installing curl (8.12.1-r1)
(2/50) Installing perl (5.40.1-r1)
(3/50) Installing perl-error (0.17029-r2)
(4/50) Installing perl-git (2.47.3-r0)
(5/50) Installing git-perl (2.47.3-r0)
(6/50) Installing perl-http-date (6.06-r0)
(7/50) Installing perl-clone (0.47-r0)
(8/50) Installing perl-uri (5.28-r0)
(9/50) Installing perl-io-html (1.004-r1)
(10/50) Installing perl-encode-locale (1.05-r5)
(11/50) Installing perl-lwp-mediatypes (6.04-r3)
(12/50) Installing perl-http-message (7.00-r0)
(13/50) Installing perl-http-cookies (6.11-r0)
(14/50) Installing perl-net-http (6.23-r1)
(15/50) Installing perl-html-tagset (3.24-r0)
(16/50) Installing perl-html-parser (3.83-r0)
(17/50) Installing perl-file-listing (6.16-r0)
(18/50) Installing perl-www-robotrules (6.02-r5)
(19/50) Installing perl-http-negotiate (6.01-r5)
(20/50) Installing perl-try-tiny (0.32-r0)
(21/50) Installing perl-libwww (6.77-r0)
(22/50) Installing libpng (1.6.47-r0)
(23/50) Installing icoutils (0.32.3-r3)
(24/50) Installing libarchive-tools (3.8.1-r0)
(25/50) Installing mingw-w64-binutils (2.43-r0)
(26/50) Installing mingw-w64-crt (12.0.0-r0)
(27/50) Installing mingw-w64-headers (12.0.0-r0)
(28/50) Installing mingw-w64-winpthreads (12.0.0-r0)
(29/50) Installing mingw-w64-gcc (14.2.0-r1)
(30/50) Installing ncurses (6.5_p20241006-r3)
(31/50) Installing libxau (1.0.11-r4)
(32/50) Installing libxdmcp (1.1.5-r1)
(33/50) Installing libxcb (1.16.1-r0)
(34/50) Installing libx11 (1.8.10-r0)
(35/50) Installing libxext (1.3.6-r2)
(36/50) Installing libxrender (0.9.11-r5)
(37/50) Installing freetype (2.13.3-r0)
(38/50) Installing fontconfig (2.15.0-r1)
(39/50) Installing pixman (0.43.4-r1)
(40/50) Installing cairo (1.18.4-r0)
(41/50) Installing libdav1d (1.5.0-r0)
(42/50) Installing libintl (0.22.5-r0)
(43/50) Installing glib (2.82.5-r0)
(44/50) Installing libxft (2.3.8-r3)
(45/50) Installing fribidi (1.0.16-r0)
(46/50) Installing graphite2 (1.3.14-r6)
(47/50) Installing harfbuzz (9.0.0-r1)
(48/50) Installing pango (1.54.0-r1)
(49/50) Installing libxml2 (2.13.4-r6)
(50/50) Installing rsvg-convert (2.59.2-r0)
Executing busybox-1.37.0-r12.trigger
Executing glib-2.82.5-r0.trigger
OK: 958 MiB in 232 packages
+ cmake -B build
-- The C compiler identification is GNU 14.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.3.0")
-- Checking for module 'libusb-1.0'
-- Found libusb-1.0, version 1.0.27
-- Configuring done (0.6s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/usb-drivers/build
+ cmake --build build -- package
[ 8%] Building C object CMakeFiles/elksmart-comm.dir/elksmart-comm.c.o
[ 16%] Linking C executable elksmart-comm
[ 16%] Built target elksmart-comm
[ 25%] Building C object CMakeFiles/razer-bw-te-ctl.dir/razer-bw-te-ctl.c.o
[ 33%] Linking C executable razer-bw-te-ctl
[ 33%] Built target razer-bw-te-ctl
[ 41%] Building C object CMakeFiles/eizoctl.dir/eizoctl.c.o
[ 50%] Linking C executable eizoctl
[ 50%] Built target eizoctl
[ 58%] Generating AsciiDoc man page for elksmart-comm
[ 66%] Generating roff man page for elksmart-comm
[ 75%] Generating AsciiDoc man page for razer-bw-te-ctl
[ 83%] Generating roff man page for razer-bw-te-ctl
[ 91%] Generating AsciiDoc man page for eizoctl
[100%] Generating roff man page for eizoctl
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build/usb-drivers-1.1.0-14-gd8b01cd-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build/usb-drivers-1.1.0-14-gd8b01cd-Linux-x86_64.zip generated.
+ sh -e ./Win64Depends.sh
-- Fetching repository DB
######################################################################### 100.0%
-- Resolving mingw-w64-x86_64-hidapi mingw-w64-x86_64-libusb
-- Fetching mingw-w64-x86_64-hidapi-0.15.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-gcc-libs-15.1.0-8-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libwinpthread-13.0.0.r79.g584661e80-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-tzdata-2025b-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libusb-1.0.28-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Verifying checksums
sha256sum: unrecognized option: ignore-missing
BusyBox v1.37.0 (2025-01-17 18:12:01 UTC) multi-call binary.
Usage: sha256sum [-c[sw]] [FILE]...
Print or check SHA256 checksums
-c Check sums against list in FILEs
-s Don't output anything, status code shows success
-w Warn about improperly formatted checksum lines
Process exited with status 1
Deploy log