- Created
- 3d ago
- Changed
- 3d ago
- Project
- p/liberty
- Commit
- 7425355d015be69434240902a691563dce2be49a
- Runner
- Alpine 3.21
- State
- Success
- Notified
- 1
- Duration
- 2m1s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.21.2-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.21.2-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.21.2-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3FF0+7EF33FF0 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.12.8-0-virt (buildozer@build-3-21-x86_64) (gcc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1-Alpine SMP PREEMPT_DYNAMIC 2025-01-02 12:14:41
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-1-1 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000003] kvm-clock: using sched offset of 1625725450 cycles
[ 0.000008] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000015] tsc: Detected 1696.073 MHz processor
[ 0.002074] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.002158] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.002165] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.020643] found SMP MP-table at [mem 0x000f66d0-0x000f66df]
[ 0.020951] RAMDISK: [mem 0x7f69b000-0x7ffd9fff]
[ 0.020956] ACPI: Early table checksum verification disabled
[ 0.020960] ACPI: RSDP 0x00000000000F6500 000014 (v00 BOCHS )
[ 0.020969] ACPI: RSDT 0x000000007FFE239C 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.020979] ACPI: FACP 0x000000007FFE2248 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.020989] ACPI: DSDT 0x000000007FFE0040 002208 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.020996] ACPI: FACS 0x000000007FFE0000 000040
[ 0.021002] ACPI: APIC 0x000000007FFE22BC 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.021008] ACPI: HPET 0x000000007FFE233C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.021014] ACPI: WAET 0x000000007FFE2374 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.021019] ACPI: Reserving FACP table memory at [mem 0x7ffe2248-0x7ffe22bb]
[ 0.021022] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2247]
[ 0.021023] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.021025] ACPI: Reserving APIC table memory at [mem 0x7ffe22bc-0x7ffe233b]
[ 0.021026] ACPI: Reserving HPET table memory at [mem 0x7ffe233c-0x7ffe2373]
[ 0.021027] ACPI: Reserving WAET table memory at [mem 0x7ffe2374-0x7ffe239b]
[ 0.021381] Zone ranges:
[ 0.021383] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.021387] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.021389] Normal empty
[ 0.021391] Movable zone start for each node
[ 0.021392] Early memory node ranges
[ 0.021392] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.021395] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.021397] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.021648] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.021683] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.030429] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.031239] ACPI: PM-Timer IO Port: 0x608
[ 0.031267] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.031339] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.031346] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.031349] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.031351] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.031353] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.031355] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.031363] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.031366] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.031382] CPU topo: Max. logical packages: 1
[ 0.031384] CPU topo: Max. logical dies: 1
[ 0.031384] CPU topo: Max. dies per package: 1
[ 0.031393] CPU topo: Max. threads per core: 1
[ 0.031395] CPU topo: Num. cores per package: 2
[ 0.031396] CPU topo: Num. threads per package: 2
[ 0.031396] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[ 0.031423] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.031487] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.031490] Booting paravirtualized kernel on KVM
[ 0.031492] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.041194] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.041843] percpu: Embedded 59 pages/cpu s203992 r8192 d29480 u1048576
[ 0.041929] kvm-guest: PV spinlocks disabled, no host support
[ 0.041931] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.042166] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.042637] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.042977] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.043107] Built 1 zonelists, mobility grouping on. Total pages: 524152
[ 0.043625] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.072131] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.072462] Kernel/User page tables isolation: enabled
[ 0.074406] Dynamic Preempt: none
[ 0.074705] rcu: Preemptible hierarchical RCU implementation.
[ 0.074708] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.074713] Trampoline variant of Tasks RCU enabled.
[ 0.074714] Tracing variant of Tasks RCU enabled.
[ 0.074716] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.074719] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.074740] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.074745] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.086994] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.087377] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.087643] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.099787] Console: colour VGA+ 80x25
[ 0.099873] printk: legacy console [ttyS0] enabled
[ 0.300972] ACPI: Core revision 20240827
[ 0.303064] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.306638] APIC: Switch to symmetric I/O mode setup
[ 0.308911] x2apic enabled
[ 0.310497] APIC: Switched APIC routing to: physical x2apic
[ 0.315213] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.317150] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.320952] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960730)
[ 0.323663] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.325416] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.330964] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.334061] Spectre V2 : Mitigation: Retpolines
[ 0.335698] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.337954] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.339709] Speculative Store Bypass: Vulnerable
[ 0.340954] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.342801] MMIO Stale Data: Unknown: No mitigations
[ 0.344072] x86/fpu: x87 FPU will use FXSAVE
[ 0.378082] Freeing SMP alternatives memory: 36K
[ 0.379368] pid_max: default: 32768 minimum: 301
[ 0.381767] LSM: initializing lsm=lockdown,capability,landlock
[ 0.384599] landlock: Up and running.
[ 0.385793] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.387819] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.511587] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.514571] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.517002] signal: max sigframe size: 1440
[ 0.518189] rcu: Hierarchical SRCU implementation.
[ 0.519401] rcu: Max phase no-delay instances is 1000.
[ 0.520916] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.521336] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.523195] smp: Bringing up secondary CPUs ...
[ 0.524684] smpboot: x86: Booting SMP configuration:
[ 0.526142] .... node #0, CPUs: #1
[ 0.541010] smp: Brought up 1 node, 2 CPUs
[ 0.543383] ----------------
[ 0.544230] | NMI testsuite:
[ 0.544967] --------------------
[ 0.545778] remote IPI: ok |
[ 0.546733] local IPI: ok |
[ 0.547589] --------------------
[ 0.548419] Good, all 2 testcases passed! |
[ 0.549549] ---------------------------------
[ 0.550955] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.553049] Memory: 2009036K/2096608K available (14336K kernel code, 1927K rwdata, 9144K rodata, 2768K init, 1504K bss, 83644K reserved, 0K cma-reserved)
[ 0.557205] devtmpfs: initialized
[ 0.557205] x86/mm: Memory block size: 128MB
[ 0.557205] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.560967] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.564745] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.567153] audit: initializing netlink subsys (disabled)
[ 0.571038] audit: type=2000 audit(1754151754.161:1): state=initialized audit_enabled=0 res=1
[ 0.571172] thermal_sys: Registered thermal governor 'step_wise'
[ 0.573735] cpuidle: using governor ladder
[ 0.577135] cpuidle: using governor menu
[ 0.578363] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.581377] PCI: Using configuration type 1 for base access
[ 0.583294] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.584274] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.584274] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.595852] ACPI: Added _OSI(Module Device)
[ 0.595852] ACPI: Added _OSI(Processor Device)
[ 0.595852] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.596096] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.602845] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.611335] ACPI: Interpreter enabled
[ 0.612663] ACPI: PM: (supports S0 S3 S5)
[ 0.614042] ACPI: Using IOAPIC for interrupt routing
[ 0.615757] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.618777] PCI: Using E820 reservations for host bridge windows
[ 0.621108] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.626488] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.628654] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.630963] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.635712] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.641752] acpiphp: Slot [3] registered
[ 0.643826] acpiphp: Slot [4] registered
[ 0.645739] acpiphp: Slot [5] registered
[ 0.647402] acpiphp: Slot [6] registered
[ 0.648952] acpiphp: Slot [7] registered
[ 0.650424] acpiphp: Slot [8] registered
[ 0.651014] acpiphp: Slot [9] registered
[ 0.652280] acpiphp: Slot [10] registered
[ 0.653977] acpiphp: Slot [11] registered
[ 0.656253] acpiphp: Slot [12] registered
[ 0.658680] acpiphp: Slot [13] registered
[ 0.661022] acpiphp: Slot [14] registered
[ 0.662553] acpiphp: Slot [15] registered
[ 0.664611] acpiphp: Slot [16] registered
[ 0.665890] acpiphp: Slot [17] registered
[ 0.667089] acpiphp: Slot [18] registered
[ 0.668462] acpiphp: Slot [19] registered
[ 0.670027] acpiphp: Slot [20] registered
[ 0.670995] acpiphp: Slot [21] registered
[ 0.672570] acpiphp: Slot [22] registered
[ 0.674116] acpiphp: Slot [23] registered
[ 0.675687] acpiphp: Slot [24] registered
[ 0.677103] acpiphp: Slot [25] registered
[ 0.678497] acpiphp: Slot [26] registered
[ 0.679726] acpiphp: Slot [27] registered
[ 0.681012] acpiphp: Slot [28] registered
[ 0.682243] acpiphp: Slot [29] registered
[ 0.683300] acpiphp: Slot [30] registered
[ 0.684429] acpiphp: Slot [31] registered
[ 0.685613] PCI host bridge to bus 0000:00
[ 0.686966] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.689254] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.690955] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.693074] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.695533] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.697748] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.701048] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.703906] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.707005] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.714258] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.717958] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.720955] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.722725] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.724652] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.726793] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.730064] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.730975] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.733414] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.742693] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.761895] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.779343] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.781257] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.784321] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.788300] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.792574] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.800973] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.805251] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.808833] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.816889] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.823244] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.839956] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.852058] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.857199] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.864589] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.877946] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.888843] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.891157] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.893028] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.894885] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.896656] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.898934] iommu: Default domain type: Translated
[ 0.900952] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.903399] SCSI subsystem initialized
[ 0.904714] pps_core: LinuxPPS API ver. 1 registered
[ 0.904714] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.910976] PTP clock support registered
[ 0.912423] PCI: Using ACPI for IRQ routing
[ 0.913598] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.913598] clocksource: Switched to clocksource kvm-clock
[ 0.914658] VFS: Disk quotas dquot_6.6.0
[ 0.916240] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.918859] pnp: PnP ACPI init
[ 0.920569] pnp: PnP ACPI: found 6 devices
[ 0.931275] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.934985] NET: Registered PF_INET protocol family
[ 0.936934] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.959941] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.963128] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.965556] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.968578] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.971322] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.973952] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.976735] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.978889] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.981483] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.983549] NET: Registered PF_XDP protocol family
[ 0.985369] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.987257] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.988971] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.990827] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.992548] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.994690] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.996355] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.998127] PCI: CLS 0 bytes, default 64
[ 0.999446] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.999552] Unpacking initramfs...
[ 1.003505] Initialise system trusted keyrings
[ 1.013635] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 1.018513] Key type asymmetric registered
[ 1.021538] Asymmetric key parser 'x509' registered
[ 1.024108] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.030632] io scheduler mq-deadline registered
[ 1.032164] io scheduler kyber registered
[ 1.034347] io scheduler bfq registered
[ 1.037014] ERST DBG: ERST support is disabled.
[ 1.039672] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 1.044328] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 1.049292] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 1.053851] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.056107] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.059882] VMware PVSCSI driver - version 1.0.7.0-k
[ 1.063376] scsi host0: ata_piix
[ 1.065352] scsi host1: ata_piix
[ 1.066592] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 1.068991] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 1.072014] hv_vmbus: registering driver hv_netvsc
[ 1.074474] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.078790] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.080488] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.082322] hv_vmbus: registering driver hyperv_keyboard
[ 1.084466] rtc_cmos 00:05: RTC can wake from S4
[ 1.087851] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.091167] rtc_cmos 00:05: registered as rtc0
[ 1.092763] rtc_cmos 00:05: setting system clock to 2025-08-02T16:22:34 UTC (1754151754)
[ 1.095396] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.097515] intel_pstate: CPU model not supported
[ 1.099375] gre: GRE over IPv4 demultiplexor driver
[ 1.100980] NET: Registered PF_INET6 protocol family
[ 1.103589] Segment Routing with IPv6
[ 1.104773] In-situ OAM (IOAM) with IPv6
[ 1.106030] Key type dns_resolver registered
[ 1.107419] IPI shorthand broadcast: enabled
[ 1.111633] sched_clock: Marking stable (882456621, 223552676)->(1108892298, -2883001)
[ 1.118468] registered taskstats version 1
[ 1.120176] Loading compiled-in X.509 certificates
[ 1.205473] Freeing initrd memory: 9468K
[ 1.218160] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 1.223891] ata2: found unknown device (class 0)
[ 1.225694] Key type .fscrypt registered
[ 1.226816] Key type fscrypt-provisioning registered
[ 1.229002] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.249472] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.316004] Freeing unused kernel image (initmem) memory: 2768K
[ 1.317309] Write protecting the kernel read-only data: 24576k
[ 1.319135] Freeing unused kernel image (rodata/data gap) memory: 1096K
[ 1.320544] rodata_test: all tests were successful
[ 1.321560] Run /init as init process
[ 1.338596] Alpine Init 3.11.1-r0
Alpine Init 3.11.1-r0
[ 1.340116] Loading boot drivers...
* Loading boot drivers: [ 1.380660] ACPI: bus type USB registered
[ 1.381902] usbcore: registered new interface driver usbfs
[ 1.383781] usbcore: registered new interface driver hub
[ 1.385623] usbcore: registered new device driver usb
[ 1.394555] usbcore: registered new interface driver usb-storage
[ 1.591385] loop: module loaded
[ 1.663079] ACPI: bus type drm_connector registered
[ 1.697679] Loading boot drivers: ok.
ok.
[ 1.701491] Mounting root...
* Mounting root: [ 1.742351] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.744614] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.774489] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.775351] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.779583] [drm] Found EDID data blob.
[ 1.780959] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.795341] Console: switching to colour frame buffer device 160x50
[ 1.797742] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.935812] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.938858] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.050011] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 2.053156] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 2.056250] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 2.059103] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.259945] block sr0: the capability attribute has been deprecated.
[ 5.922279] EXT4-fs (vda): mounted filesystem 8dd54871-29dc-4dc5-9103-cf8d3d81e40c ro with ordered data mode. Quota mode: none.
[ 5.929315] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.55.1 is starting up Linux 6.12.8-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5527/51200 files, 164508/204800 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 24.3.1 running 'init-local' at Sat, 02 Aug 2025 16:22:45 +0000. Up 11.96 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.1.0 starting
DUID 00:01:00:01:30:20:f7:d7:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::3d74:63b0:c529:a85e/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 24.3.1 running 'init' at Sat, 02 Aug 2025 16:22:59 +0000. Up 26.47 seconds.
ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::3d74:63b0:c529:a85e/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | U |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UG |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:IJY4nOCnHSAU/+/v75I/CWfcdwjkGsSgjAyZaPKP4IA root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
|+=oo .o |
|=+== + . o . |
|+o=+* + . o |
|E =oo. . . o |
|oo + . S .o.. . |
| .. . . ..+ ....|
| . = . . .|
| . o o |
| .oo=+. |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:ZzShsOs+z6UQrTVqZjZ5qWjjskaOv5Hsmx8JDl1SU+Y root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| o.+ . |
| . + o . . |
| . . E . o |
| . o o . . |
|. o o S o |
| +.o o * = |
| += o % o . |
|..+ooO.* o |
| oBO+.oo+ |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:jwIJqxFDCv769oBvCqOttTqM4P+af3fJHV6JOvQ1LrA root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
|.. |
|= |
|+.. |
| o.o . |
|. ..o S . .|
|.oo . o o o = |
|Oo.. . . + O = .|
|=*o+o o . E = . |
|+=B*=+. . . . . |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 24.3.1 running 'modules:config' at Sat, 02 Aug 2025 16:23:02 +0000. Up 28.77 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 24.3.1 running 'modules:final' at Sat, 02 Aug 2025 16:23:03 +0000. Up 30.12 seconds.
2025-08-02 16:23:03,670 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.21/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.21/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20250619-r0)
Executing busybox-1.37.0-r9.trigger
Executing ca-certificates-20250619-r0.trigger
OK: 129 MiB in 143 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:ZzShsOs+z6UQrTVqZjZ5qWjjskaOv5Hsmx8JDl1SU+Y root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:jwIJqxFDCv769oBvCqOttTqM4P+af3fJHV6JOvQ1LrA root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:IJY4nOCnHSAU/+/v75I/CWfcdwjkGsSgjAyZaPKP4IA root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBFJPci8YNQxRzrtQ+MiRGuYXC7TTlsTavXJOskf9qjAFtRed1oAMbLbMuLqjBHt/LmjSFLHqqgsiljLYX/H+pYk= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAILgnGZFlLRH/OfOashY6maCZoYA4sr6vsNHRhfKEHqqa root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.3.1 finished at Sat, 02 Aug 2025 16:23:06 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 32.74 seconds
[ ok ]
Welcome to Alpine Linux 3.21
Kernel 6.12.8-0-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
..........
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.6-r2 -> 2.14.6-r3)
Executing busybox-1.37.0-r9.trigger
Continuing the upgrade transaction with new apk-tools:
(1/49) Upgrading musl (1.2.5-r8 -> 1.2.5-r9)
(2/49) Upgrading busybox (1.37.0-r9 -> 1.37.0-r12)
Executing busybox-1.37.0-r12.post-upgrade
(3/49) Upgrading busybox-binsh (1.37.0-r9 -> 1.37.0-r12)
(4/49) Upgrading busybox-mdev-openrc (1.37.0-r9 -> 1.37.0-r12)
(5/49) Upgrading alpine-release (3.21.2-r0 -> 3.21.4-r0)
(6/49) Upgrading ca-certificates-bundle (20241121-r1 -> 20250619-r0)
(7/49) Upgrading libcrypto3 (3.3.2-r4 -> 3.3.4-r0)
(8/49) Upgrading libssl3 (3.3.2-r4 -> 3.3.4-r0)
(9/49) Upgrading ssl_client (1.37.0-r9 -> 1.37.0-r12)
(10/49) Upgrading busybox-openrc (1.37.0-r9 -> 1.37.0-r12)
(11/49) Upgrading busybox-suid (1.37.0-r9 -> 1.37.0-r12)
(12/49) Upgrading musl-utils (1.2.5-r8 -> 1.2.5-r9)
(13/49) Upgrading alpine-base (3.21.2-r0 -> 3.21.4-r0)
(14/49) Upgrading libffi (3.4.6-r0 -> 3.4.7-r0)
(15/49) Upgrading libtasn1 (4.19.0-r2 -> 4.20.0-r0)
(16/49) Upgrading libblkid (2.40.2-r4 -> 2.40.4-r1)
(17/49) Upgrading blkid (2.40.2-r4 -> 2.40.4-r1)
(18/49) Upgrading libsmartcols (2.40.2-r4 -> 2.40.4-r1)
(19/49) Upgrading partx (2.40.2-r4 -> 2.40.4-r1)
(20/49) Upgrading libuuid (2.40.2-r4 -> 2.40.4-r1)
(21/49) Upgrading libfdisk (2.40.2-r4 -> 2.40.4-r1)
(22/49) Upgrading sfdisk (2.40.2-r4 -> 2.40.4-r1)
(23/49) Upgrading libexpat (2.6.4-r0 -> 2.7.0-r0)
(24/49) Upgrading xz-libs (5.6.3-r0 -> 5.6.3-r1)
(25/49) Upgrading sqlite-libs (3.47.1-r0 -> 3.48.0-r3)
(26/49) Upgrading python3 (3.12.8-r1 -> 3.12.11-r0)
(27/49) Upgrading python3-pycache-pyc0 (3.12.8-r1 -> 3.12.11-r0)
(28/49) Upgrading pyc (3.12.8-r1 -> 3.12.11-r0)
(29/49) Upgrading py3-jinja2 (3.1.5-r0 -> 3.1.6-r0)
(30/49) Upgrading py3-jinja2-pyc (3.1.5-r0 -> 3.1.6-r0)
(31/49) Upgrading py3-requests (2.32.3-r0 -> 2.32.4-r0)
(32/49) Upgrading py3-requests-pyc (2.32.3-r0 -> 2.32.4-r0)
(33/49) Upgrading tzdata (2024b-r1 -> 2025b-r0)
(34/49) Upgrading python3-pyc (3.12.8-r1 -> 3.12.11-r0)
(35/49) Upgrading dhcpcd (10.1.0-r0 -> 10.1.0-r1)
Executing dhcpcd-10.1.0-r1.post-upgrade
(36/49) Upgrading dhcpcd-openrc (10.1.0-r0 -> 10.1.0-r1)
(37/49) Upgrading device-mapper-libs (2.03.28-r2 -> 2.03.29-r1)
(38/49) Upgrading linux-virt (6.12.8-r0 -> 6.12.40-r0)
(39/49) Upgrading libmount (2.40.2-r4 -> 2.40.4-r1)
(40/49) Upgrading mount (2.40.2-r4 -> 2.40.4-r1)
(41/49) Upgrading openssh-keygen (9.9_p1-r2 -> 9.9_p2-r0)
(42/49) Upgrading openssh-client-common (9.9_p1-r2 -> 9.9_p2-r0)
(43/49) Upgrading openssh-client-default (9.9_p1-r2 -> 9.9_p2-r0)
(44/49) Upgrading openssh-sftp-server (9.9_p1-r2 -> 9.9_p2-r0)
(45/49) Upgrading openssh-server-common (9.9_p1-r2 -> 9.9_p2-r0)
(46/49) Upgrading openssh-server-common-openrc (9.9_p1-r2 -> 9.9_p2-r0)
(47/49) Upgrading openssh-server (9.9_p1-r2 -> 9.9_p2-r0)
Executing openssh-server-9.9_p2-r0.post-upgrade
(48/49) Upgrading openssh (9.9_p1-r2 -> 9.9_p2-r0)
(49/49) Upgrading openssh-server-pam (9.9_p1-r2 -> 9.9_p2-r0)
Executing busybox-1.37.0-r12.trigger
Executing ca-certificates-20250619-r0.trigger
Executing kmod-33-r2.trigger
Executing mkinitfs-3.11.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.12.40-0-virt
Executing syslinux-6.04_pre1-r16.trigger
/boot is device /dev/vda
OK: 129 MiB in 143 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.34.5-r0)
(3/10) Installing nghttp2-libs (1.64.0-r0)
(4/10) Installing libpsl (0.21.5-r3)
(5/10) Installing libcurl (8.12.1-r1)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.47.3-r0)
(8/10) Installing git-init-template (2.47.3-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.37.0-r12.trigger
OK: 139 MiB in 153 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/liberty.git liberty
Cloning into 'liberty'...
remote: Enumerating objects: 897, done.
remote: Counting objects: 100% (366/366), done.
remote: Compressing objects: 100% (363/363), done.
remote: Total 897 (delta 232), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (897/897), 436.02 KiB | 4.36 MiB/s, done.
Resolving deltas: 100% (553/553), done.
+ cd liberty
+ git -c 'advice.detachedHead=false' checkout 7425355d015be69434240902a691563dce2be49a
HEAD is now at 7425355 liberty-xui: fix a new Fontconfig warning
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=7425355
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/7425355/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake openssl-dev pulseaudio-dev go nodejs
(1/93) Installing jansson (2.14-r4)
(2/93) Installing binutils (2.43.1-r3)
(3/93) Installing libmagic (5.46-r2)
(4/93) Installing file (5.46-r2)
(5/93) Installing libgomp (14.2.0-r4)
(6/93) Installing libatomic (14.2.0-r4)
(7/93) Installing isl26 (0.26-r1)
(8/93) Installing mpfr4 (4.2.1-r0)
(9/93) Installing mpc1 (1.3.1-r1)
(10/93) Installing gcc (14.2.0-r4)
(11/93) Installing libstdc++-dev (14.2.0-r4)
(12/93) Installing musl-dev (1.2.5-r9)
(13/93) Installing g++ (14.2.0-r4)
(14/93) Installing make (4.4.1-r2)
(15/93) Installing fortify-headers (1.1-r5)
(16/93) Installing patch (2.7.6-r10)
(17/93) Installing build-base (0.5-r3)
(18/93) Installing acl-libs (2.3.2-r1)
(19/93) Installing lz4-libs (1.10.0-r0)
(20/93) Installing libarchive (3.8.1-r0)
(21/93) Installing rhash-libs (1.4.5-r0)
(22/93) Installing libuv (1.49.2-r0)
(23/93) Installing cmake (3.31.1-r0)
(24/93) Installing go (1.23.9-r0)
(25/93) Installing ada-libs (2.9.2-r1)
(26/93) Installing icu-data-en (74.2-r1)
Executing icu-data-en-74.2-r1.post-install
*
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
*
(27/93) Installing icu-libs (74.2-r1)
(28/93) Installing simdjson (3.10.1-r0)
(29/93) Installing simdutf (5.6.3-r0)
(30/93) Installing nodejs (22.15.1-r0)
(31/93) Installing pkgconf (2.3.0-r0)
(32/93) Installing openssl-dev (3.3.4-r0)
(33/93) Installing libintl (0.22.5-r0)
(34/93) Installing glib (2.82.5-r0)
(35/93) Installing libxau (1.0.11-r4)
(36/93) Installing libxdmcp (1.1.5-r1)
(37/93) Installing libxcb (1.16.1-r0)
(38/93) Installing libx11 (1.8.10-r0)
(39/93) Installing libasyncns (0.8-r4)
(40/93) Installing dbus-libs (1.14.10-r4)
(41/93) Installing libltdl (2.4.7-r3)
(42/93) Installing orc (0.4.40-r1)
(43/93) Installing libogg (1.3.5-r5)
(44/93) Installing libflac (1.4.3-r1)
(45/93) Installing alsa-lib (1.2.12-r0)
(46/93) Installing lame-libs (3.100-r5)
(47/93) Installing mpg123-libs (1.32.9-r0)
(48/93) Installing opus (1.5.2-r1)
(49/93) Installing libvorbis (1.3.7-r2)
(50/93) Installing libsndfile (1.2.2-r2)
(51/93) Installing soxr (0.1.3-r7)
(52/93) Installing speexdsp (1.2.1-r2)
(53/93) Installing tdb-libs (1.4.12-r0)
(54/93) Installing libpulse (17.0-r4)
(55/93) Installing libpulse-mainloop-glib (17.0-r4)
(56/93) Installing bzip2-dev (1.0.8-r6)
(57/93) Installing libxml2 (2.13.4-r6)
(58/93) Installing libxml2-utils (2.13.4-r6)
(59/93) Installing docbook-xml (4.5-r9)
Executing docbook-xml-4.5-r9.post-install
(60/93) Installing libgpg-error (1.51-r0)
(61/93) Installing libgcrypt (1.10.3-r1)
(62/93) Installing libxslt (1.1.42-r2)
(63/93) Installing docbook-xsl-ns (1.79.2-r11)
Executing docbook-xsl-ns-1.79.2-r11.post-install
(64/93) Installing docbook-xsl-nons (1.79.2-r11)
Executing docbook-xsl-nons-1.79.2-r11.post-install
(65/93) Installing docbook-xsl (1.79.2-r11)
(66/93) Installing xz (5.6.3-r1)
(67/93) Installing gettext-asprintf (0.22.5-r0)
(68/93) Installing gettext-libs (0.22.5-r0)
(69/93) Installing gettext-envsubst (0.22.5-r0)
(70/93) Installing gettext (0.22.5-r0)
(71/93) Installing gettext-dev (0.22.5-r0)
(72/93) Installing py3-parsing (3.1.4-r0)
(73/93) Installing py3-parsing-pyc (3.1.4-r0)
(74/93) Installing py3-packaging (24.2-r0)
(75/93) Installing py3-packaging-pyc (24.2-r0)
(76/93) Installing linux-headers (6.6-r1)
(77/93) Installing libffi-dev (3.4.7-r0)
(78/93) Installing bsd-compat-headers (0.7.2-r6)
(79/93) Installing libformw (6.5_p20241006-r3)
(80/93) Installing libmenuw (6.5_p20241006-r3)
(81/93) Installing libncurses++ (6.5_p20241006-r3)
(82/93) Installing ncurses-dev (6.5_p20241006-r3)
(83/93) Installing libedit-dev (20240808.3.1-r0)
(84/93) Installing zlib-dev (1.3.1-r2)
(85/93) Installing libpcre2-16 (10.43-r0)
(86/93) Installing libpcre2-32 (10.43-r0)
(87/93) Installing pcre2-dev (10.43-r0)
(88/93) Installing liblastlog2 (2.40.4-r1)
(89/93) Installing sqlite (3.48.0-r3)
(90/93) Installing sqlite-dev (3.48.0-r3)
(91/93) Installing util-linux-dev (2.40.4-r1)
(92/93) Installing glib-dev (2.82.5-r0)
(93/93) Installing pulseaudio-dev (17.0-r4)
Executing busybox-1.37.0-r12.trigger
Executing glib-2.82.5-r0.trigger
No schema files found: doing nothing.
OK: 746 MiB in 246 packages
+ doas apk add --no-interactive lua5.4-dev ncurses-dev
(1/3) Installing lua5.4-libs (5.4.7-r0)
(2/3) Installing lua5.4 (5.4.7-r0)
(3/3) Installing lua5.4-dev (5.4.7-r0)
Executing busybox-1.37.0-r12.trigger
OK: 748 MiB in 249 packages
+ cmake -B build
-- The C compiler identification is GNU 14.2.0
-- The CXX compiler identification is GNU 14.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.3.0")
-- Checking for modules 'libssl;libcrypto'
-- Found libssl, version 3.3.4
-- Found libcrypto, version 3.3.4
-- Checking for module 'libpulse'
-- Found libpulse, version 17.0
CMake Warning at CMakeLists.txt:135 (message):
Cannot test generated protocol code for Swift
-- Configuring done (1.2s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build
+ cmake --build build
[ 4%] Building C object CMakeFiles/test-liberty.dir/tests/liberty.c.o
[ 9%] Linking C executable test-liberty
[ 9%] Built target test-liberty
[ 14%] Building C object CMakeFiles/test-proto.dir/tests/proto.c.o
In file included from /home/ci/liberty/tests/proto.c:34:
/home/ci/liberty/tests/proto.c: In function 'test_irc':
/home/ci/liberty/tests/../liberty.c:236:29: warning: right-hand operand of comma expression has no effect [-Wunused-value]
236 | ((condition) ? true : \
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
237 | (assertion_failure_handler (g_soft_asserts_are_deadly, \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
238 | __FILE__, __LINE__, __func__, #condition), false))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ci/liberty/tests/proto.c:56:25: note: in expansion of macro 'soft_assert'
56 | soft_assert (!"found unexpected message tag");
| ^~~~~~~~~~~
[ 19%] Linking C executable test-proto
[ 19%] Built target test-proto
[ 23%] Building C object CMakeFiles/test-xdg.dir/tests/xdg.c.o
[ 28%] Linking C executable test-xdg
[ 28%] Built target test-xdg
[ 33%] Building C object CMakeFiles/test-pulse.dir/tests/pulse.c.o
[ 38%] Linking C executable test-pulse
[ 38%] Built target test-pulse
[ 42%] Generating man page for libertyxdr
[ 42%] Built target docs
[ 47%] Generating test protocol code (c)
[ 52%] Generating test protocol code (cpp)
[ 57%] Generating test protocol code (go)
[ 61%] Generating test protocol code (mjs)
[ 66%] Generating test protocol code (swift)
[ 66%] Built target test-lxdrgen-outputs
[ 71%] Building C object CMakeFiles/test-lxdrgen-c.dir/tests/lxdrgen.c.o
[ 76%] Linking C executable test-lxdrgen-c
[ 80%] Built target test-lxdrgen-c
[ 85%] Building CXX object CMakeFiles/test-lxdrgen-cpp.dir/tests/lxdrgen.cpp.o
[ 90%] Building CXX object CMakeFiles/test-lxdrgen-cpp.dir/tools/lxdrgen-cpp-posix.cpp.o
[ 95%] Linking CXX executable test-lxdrgen-cpp
[100%] Built target test-lxdrgen-cpp
+ cmake --build build -- test
Running tests...
Test project /home/ci/liberty/build
Start 1: test-liberty
1/10 Test #1: test-liberty ..................... Passed 0.04 sec
Start 2: test-proto
2/10 Test #2: test-proto ....................... Passed 0.01 sec
Start 3: test-xdg
3/10 Test #3: test-xdg ......................... Passed 0.00 sec
Start 4: test-pulse
4/10 Test #4: test-pulse ....................... Passed 0.00 sec
Start 5: test-help2adoc
5/10 Test #5: test-help2adoc ................... Passed 0.08 sec
Start 6: test-cmake-parser
6/10 Test #6: test-cmake-parser ................ Passed 0.08 sec
Start 7: test-lxdrgen-c
7/10 Test #7: test-lxdrgen-c ................... Passed 0.00 sec
Start 8: test-lxdrgen-cpp
8/10 Test #8: test-lxdrgen-cpp ................. Passed 0.01 sec
Start 9: test-lxdrgen-go
9/10 Test #9: test-lxdrgen-go .................. Passed 16.52 sec
Start 10: test-lxdrgen-mjs
10/10 Test #10: test-lxdrgen-mjs ................. Passed 0.08 sec
100% tests passed, 0 tests failed out of 10
Total Test time (real) = 16.83 sec
+ cmake -B build-wdye54 -S tools/wdye
-- The C compiler identification is GNU 14.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Curses: /usr/lib/libcurses.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.3.0")
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (0.7s)
-- Generating done (0.1s)
-- Build files have been written to: /home/ci/liberty/build-wdye54
+ cmake --build build-wdye54
[ 50%] Building C object CMakeFiles/wdye.dir/wdye.c.o
[100%] Linking C executable wdye
[100%] Built target wdye
+ cmake --build build-wdye54 -- test
Running tests...
Test project /home/ci/liberty/build-wdye54
Start 1: wdye
1/1 Test #1: wdye ............................. Passed 0.51 sec
100% tests passed, 0 tests failed out of 1
Total Test time (real) = 0.51 sec
+ doas apk del --no-interactive lua5.4-dev
(1/3) Purging lua5.4-dev (5.4.7-r0)
(2/3) Purging lua5.4 (5.4.7-r0)
(3/3) Purging lua5.4-libs (5.4.7-r0)
Executing busybox-1.37.0-r12.trigger
OK: 746 MiB in 246 packages
+ doas apk add --no-interactive lua5.3-dev
(1/4) Installing linenoise (1.0-r5)
(2/4) Installing lua5.3-libs (5.3.6-r6)
(3/4) Installing lua5.3 (5.3.6-r6)
(4/4) Installing lua5.3-dev (5.3.6-r6)
Executing busybox-1.37.0-r12.trigger
OK: 748 MiB in 250 packages
+ cmake -B build-wdye53 -S tools/wdye
-- The C compiler identification is GNU 14.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Curses: /usr/lib/libcurses.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.3.0")
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (0.7s)
-- Generating done (0.1s)
-- Build files have been written to: /home/ci/liberty/build-wdye53
+ cmake --build build-wdye53
[ 50%] Building C object CMakeFiles/wdye.dir/wdye.c.o
[100%] Linking C executable wdye
[100%] Built target wdye
+ cmake --build build-wdye53 -- test
Running tests...
Test project /home/ci/liberty/build-wdye53
Start 1: wdye
1/1 Test #1: wdye ............................. Passed 0.51 sec
100% tests passed, 0 tests failed out of 1
Total Test time (real) = 0.51 sec
+ doas apk del --no-interactive --rdepends ncurses-dev
(1/61) Purging pulseaudio-dev (17.0-r4)
(2/61) Purging libpulse-mainloop-glib (17.0-r4)
(3/61) Purging libpulse (17.0-r4)
(4/61) Purging py3-packaging-pyc (24.2-r0)
(5/61) Purging py3-parsing-pyc (3.1.4-r0)
(6/61) Purging soxr (0.1.3-r7)
(7/61) Purging speexdsp (1.2.1-r2)
(8/61) Purging tdb-libs (1.4.12-r0)
(9/61) Purging libsndfile (1.2.2-r2)
(10/61) Purging alsa-lib (1.2.12-r0)
(11/61) Purging glib-dev (2.82.5-r0)
(12/61) Purging bzip2-dev (1.0.8-r6)
(13/61) Purging docbook-xsl (1.79.2-r11)
(14/61) Purging docbook-xsl-ns (1.79.2-r11)
Executing docbook-xsl-ns-1.79.2-r11.pre-deinstall
(15/61) Purging docbook-xsl-nons (1.79.2-r11)
Executing docbook-xsl-nons-1.79.2-r11.pre-deinstall
(16/61) Purging docbook-xml (4.5-r9)
Executing docbook-xml-4.5-r9.pre-deinstall
(17/61) Purging gettext-dev (0.22.5-r0)
(18/61) Purging xz (5.6.3-r1)
(19/61) Purging gettext-asprintf (0.22.5-r0)
(20/61) Purging gettext (0.22.5-r0)
(21/61) Purging gettext-envsubst (0.22.5-r0)
(22/61) Purging libxml2-utils (2.13.4-r6)
(23/61) Purging libxslt (1.1.42-r2)
(24/61) Purging py3-packaging (24.2-r0)
(25/61) Purging py3-parsing (3.1.4-r0)
(26/61) Purging pcre2-dev (10.43-r0)
(27/61) Purging zlib-dev (1.3.1-r2)
(28/61) Purging libpcre2-16 (10.43-r0)
(29/61) Purging libpcre2-32 (10.43-r0)
(30/61) Purging libedit-dev (20240808.3.1-r0)
(31/61) Purging ncurses-dev (6.5_p20241006-r3)
(32/61) Purging libncurses++ (6.5_p20241006-r3)
(33/61) Purging bsd-compat-headers (0.7.2-r6)
(34/61) Purging dbus-libs (1.14.10-r4)
(35/61) Purging gettext-libs (0.22.5-r0)
(36/61) Purging glib (2.82.5-r0)
(37/61) Purging lame-libs (3.100-r5)
(38/61) Purging libasyncns (0.8-r4)
(39/61) Purging libffi-dev (3.4.7-r0)
(40/61) Purging linux-headers (6.6-r1)
(41/61) Purging libflac (1.4.3-r1)
(42/61) Purging libformw (6.5_p20241006-r3)
(43/61) Purging libgcrypt (1.10.3-r1)
(44/61) Purging libgpg-error (1.51-r0)
(45/61) Purging libintl (0.22.5-r0)
(46/61) Purging util-linux-dev (2.40.4-r1)
(47/61) Purging liblastlog2 (2.40.4-r1)
(48/61) Purging libltdl (2.4.7-r3)
(49/61) Purging libmenuw (6.5_p20241006-r3)
(50/61) Purging libvorbis (1.3.7-r2)
(51/61) Purging libogg (1.3.5-r5)
(52/61) Purging libx11 (1.8.10-r0)
(53/61) Purging libxcb (1.16.1-r0)
(54/61) Purging libxau (1.0.11-r4)
(55/61) Purging libxdmcp (1.1.5-r1)
(56/61) Purging libxml2 (2.13.4-r6)
(57/61) Purging mpg123-libs (1.32.9-r0)
(58/61) Purging opus (1.5.2-r1)
(59/61) Purging orc (0.4.40-r1)
(60/61) Purging sqlite-dev (3.48.0-r3)
(61/61) Purging sqlite (3.48.0-r3)
Executing busybox-1.37.0-r12.trigger
OK: 669 MiB in 189 packages
+ cmake -B build-wdye -S tools/wdye
-- The C compiler identification is GNU 14.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Could NOT find Curses (missing: CURSES_LIBRARY CURSES_INCLUDE_PATH)
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.3.0")
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (0.6s)
-- Generating done (0.1s)
-- Build files have been written to: /home/ci/liberty/build-wdye
+ cmake --build build-wdye
[ 50%] Building C object CMakeFiles/wdye.dir/wdye.c.o
[100%] Linking C executable wdye
[100%] Built target wdye
Deploy log