- Created
- 6h ago
- Changed
- 6h ago
- Project
- p/usb-drivers
- Commit
- c6f47a098198f22922100346d13f054de4aace32
- Runner
- Alpine 3.21
- State
- Success
- Notified
- 1
- Duration
- 1m36s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.21.2-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.21.2-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.21.2-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3FF0+7EF33FF0 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.12.8-0-virt (buildozer@build-3-21-x86_64) (gcc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1-Alpine SMP PREEMPT_DYNAMIC 2025-01-02 12:14:41
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-1-1 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1775783648 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000010] tsc: Detected 1696.073 MHz processor
[ 0.001544] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001615] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001622] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.020695] found SMP MP-table at [mem 0x000f66d0-0x000f66df]
[ 0.020984] RAMDISK: [mem 0x7f69b000-0x7ffd9fff]
[ 0.020989] ACPI: Early table checksum verification disabled
[ 0.020994] ACPI: RSDP 0x00000000000F6500 000014 (v00 BOCHS )
[ 0.021003] ACPI: RSDT 0x000000007FFE239C 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.021013] ACPI: FACP 0x000000007FFE2248 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.021023] ACPI: DSDT 0x000000007FFE0040 002208 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.021030] ACPI: FACS 0x000000007FFE0000 000040
[ 0.021036] ACPI: APIC 0x000000007FFE22BC 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.021042] ACPI: HPET 0x000000007FFE233C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.021048] ACPI: WAET 0x000000007FFE2374 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.021053] ACPI: Reserving FACP table memory at [mem 0x7ffe2248-0x7ffe22bb]
[ 0.021056] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe2247]
[ 0.021057] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.021059] ACPI: Reserving APIC table memory at [mem 0x7ffe22bc-0x7ffe233b]
[ 0.021060] ACPI: Reserving HPET table memory at [mem 0x7ffe233c-0x7ffe2373]
[ 0.021061] ACPI: Reserving WAET table memory at [mem 0x7ffe2374-0x7ffe239b]
[ 0.021397] Zone ranges:
[ 0.021399] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.021403] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.021406] Normal empty
[ 0.021407] Movable zone start for each node
[ 0.021408] Early memory node ranges
[ 0.021409] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.021412] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.021414] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.021639] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.021694] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.030279] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.031058] ACPI: PM-Timer IO Port: 0x608
[ 0.031084] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.031154] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.031160] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.031163] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.031165] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.031167] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.031169] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.031177] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.031180] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.031196] CPU topo: Max. logical packages: 1
[ 0.031197] CPU topo: Max. logical dies: 1
[ 0.031198] CPU topo: Max. dies per package: 1
[ 0.031207] CPU topo: Max. threads per core: 1
[ 0.031208] CPU topo: Num. cores per package: 2
[ 0.031209] CPU topo: Num. threads per package: 2
[ 0.031210] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[ 0.031237] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.031259] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.031261] Booting paravirtualized kernel on KVM
[ 0.031263] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.040838] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.041516] percpu: Embedded 59 pages/cpu s203992 r8192 d29480 u1048576
[ 0.041605] kvm-guest: PV spinlocks disabled, no host support
[ 0.041607] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.041778] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.042437] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.042894] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.043027] Built 1 zonelists, mobility grouping on. Total pages: 524152
[ 0.043712] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.076179] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.076550] Kernel/User page tables isolation: enabled
[ 0.078558] Dynamic Preempt: none
[ 0.078872] rcu: Preemptible hierarchical RCU implementation.
[ 0.078875] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.078879] Trampoline variant of Tasks RCU enabled.
[ 0.078880] Tracing variant of Tasks RCU enabled.
[ 0.078882] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.078885] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.078906] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.078911] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
[ 0.095396] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.095740] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.096004] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.109674] Console: colour VGA+ 80x25
[ 0.109780] printk: legacy console [ttyS0] enabled
[ 0.324166] ACPI: Core revision 20240827
[ 0.325898] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.329018] APIC: Switch to symmetric I/O mode setup
[ 0.331472] x2apic enabled
[ 0.333464] APIC: Switched APIC routing to: physical x2apic
[ 0.339066] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.342059] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 0.346325] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960730)
[ 0.349503] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.356330] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.358430] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.361541] Spectre V2 : Mitigation: Retpolines
[ 0.363226] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.366064] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.366329] Speculative Store Bypass: Vulnerable
[ 0.367654] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.376322] MMIO Stale Data: Unknown: No mitigations
[ 0.377777] x86/fpu: x87 FPU will use FXSAVE
[ 0.414845] Freeing SMP alternatives memory: 36K
[ 0.416273] pid_max: default: 32768 minimum: 301
[ 0.417360] LSM: initializing lsm=lockdown,capability,landlock
[ 0.420381] landlock: Up and running.
[ 0.421839] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.423977] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.550239] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.553390] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.556132] signal: max sigframe size: 1440
[ 0.556315] rcu: Hierarchical SRCU implementation.
[ 0.556315] rcu: Max phase no-delay instances is 1000.
[ 0.556431] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.559034] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.560814] smp: Bringing up secondary CPUs ...
[ 0.562425] smpboot: x86: Booting SMP configuration:
[ 0.564188] .... node #0, CPUs: #1
[ 0.576384] smp: Brought up 1 node, 2 CPUs
[ 0.578683] ----------------
[ 0.579490] | NMI testsuite:
[ 0.580298] --------------------
[ 0.581303] remote IPI: ok |
[ 0.582257] local IPI: ok |
[ 0.583181] --------------------
[ 0.584162] Good, all 2 testcases passed! |
[ 0.586329] ---------------------------------
[ 0.587532] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.589791] Memory: 2009036K/2096608K available (14336K kernel code, 1927K rwdata, 9144K rodata, 2768K init, 1504K bss, 83644K reserved, 0K cma-reserved)
[ 0.594206] devtmpfs: initialized
[ 0.596403] x86/mm: Memory block size: 128MB
[ 0.598391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.600081] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.604298] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.606532] audit: initializing netlink subsys (disabled)
[ 0.608496] audit: type=2000 audit(1754153805.475:1): state=initialized audit_enabled=0 res=1
[ 0.608496] thermal_sys: Registered thermal governor 'step_wise'
[ 0.609359] cpuidle: using governor ladder
[ 0.617513] cpuidle: using governor menu
[ 0.617654] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.620156] PCI: Using configuration type 1 for base access
[ 0.622559] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.636742] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.639080] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.644159] ACPI: Added _OSI(Module Device)
[ 0.645814] ACPI: Added _OSI(Processor Device)
[ 0.646333] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.647937] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.653364] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.658160] ACPI: Interpreter enabled
[ 0.658198] ACPI: PM: (supports S0 S3 S5)
[ 0.666332] ACPI: Using IOAPIC for interrupt routing
[ 0.668284] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.671790] PCI: Using E820 reservations for host bridge windows
[ 0.674312] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.682898] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.685019] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.686332] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.689767] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.697355] acpiphp: Slot [3] registered
[ 0.698842] acpiphp: Slot [4] registered
[ 0.700313] acpiphp: Slot [5] registered
[ 0.701804] acpiphp: Slot [6] registered
[ 0.703450] acpiphp: Slot [7] registered
[ 0.705059] acpiphp: Slot [8] registered
[ 0.706401] acpiphp: Slot [9] registered
[ 0.707950] acpiphp: Slot [10] registered
[ 0.709389] acpiphp: Slot [11] registered
[ 0.710834] acpiphp: Slot [12] registered
[ 0.712374] acpiphp: Slot [13] registered
[ 0.714080] acpiphp: Slot [14] registered
[ 0.716403] acpiphp: Slot [15] registered
[ 0.717910] acpiphp: Slot [16] registered
[ 0.719418] acpiphp: Slot [17] registered
[ 0.720924] acpiphp: Slot [18] registered
[ 0.722637] acpiphp: Slot [19] registered
[ 0.724315] acpiphp: Slot [20] registered
[ 0.726388] acpiphp: Slot [21] registered
[ 0.727960] acpiphp: Slot [22] registered
[ 0.729515] acpiphp: Slot [23] registered
[ 0.731006] acpiphp: Slot [24] registered
[ 0.732927] acpiphp: Slot [25] registered
[ 0.734349] acpiphp: Slot [26] registered
[ 0.736372] acpiphp: Slot [27] registered
[ 0.737878] acpiphp: Slot [28] registered
[ 0.740031] acpiphp: Slot [29] registered
[ 0.741532] acpiphp: Slot [30] registered
[ 0.743146] acpiphp: Slot [31] registered
[ 0.744630] PCI host bridge to bus 0000:00
[ 0.746340] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.749026] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.751594] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.754751] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.756333] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.760007] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.762250] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.767261] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.771385] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.780881] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.785166] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.786332] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.788528] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.791761] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.796722] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.800887] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.803581] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.806879] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.826386] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.841372] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.866464] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.870536] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.874433] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.878187] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.882153] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.894556] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.898012] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.902306] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.915511] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.919967] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.949117] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.958737] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.971423] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.979472] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.998684] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 1.009124] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 1.016586] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 1.018978] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 1.021344] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 1.023690] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 1.027021] iommu: Default domain type: Translated
[ 1.028755] iommu: DMA domain TLB invalidation policy: lazy mode
[ 1.031378] SCSI subsystem initialized
[ 1.032978] pps_core: LinuxPPS API ver. 1 registered
[ 1.032978] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.036352] PTP clock support registered
[ 1.038315] PCI: Using ACPI for IRQ routing
[ 1.039152] hpet: 3 channels of 0 reserved for per-cpu timers
[ 1.046404] clocksource: Switched to clocksource kvm-clock
[ 1.050903] VFS: Disk quotas dquot_6.6.0
[ 1.052851] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.056872] pnp: PnP ACPI init
[ 1.059922] pnp: PnP ACPI: found 6 devices
[ 1.074374] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.077847] NET: Registered PF_INET protocol family
[ 1.079660] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.102770] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 1.105909] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.108738] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 1.111825] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 1.114650] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.117240] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 1.120022] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 1.122612] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 1.125507] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.127753] NET: Registered PF_XDP protocol family
[ 1.129570] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.131950] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.134192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.136445] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 1.138766] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 1.141507] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 1.143609] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.145874] PCI: CLS 0 bytes, default 64
[ 1.147480] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872a9796f1, max_idle_ns: 440795212049 ns
[ 1.147660] Unpacking initramfs...
[ 1.151127] Initialise system trusted keyrings
[ 1.151409] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 1.151742] Key type asymmetric registered
[ 1.151749] Asymmetric key parser 'x509' registered
[ 1.151883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.152078] io scheduler mq-deadline registered
[ 1.152082] io scheduler kyber registered
[ 1.152217] io scheduler bfq registered
[ 1.173059] ERST DBG: ERST support is disabled.
[ 1.176498] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 1.183792] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 1.189822] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 1.197517] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.202266] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.209519] VMware PVSCSI driver - version 1.0.7.0-k
[ 1.214940] scsi host0: ata_piix
[ 1.218639] scsi host1: ata_piix
[ 1.221662] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 1.225628] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 1.229620] hv_vmbus: registering driver hv_netvsc
[ 1.233865] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.239156] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.241703] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.243927] hv_vmbus: registering driver hyperv_keyboard
[ 1.246655] rtc_cmos 00:05: RTC can wake from S4
[ 1.252189] rtc_cmos 00:05: registered as rtc0
[ 1.253809] rtc_cmos 00:05: setting system clock to 2025-08-02T16:56:46 UTC (1754153806)
[ 1.257954] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.260908] intel_pstate: CPU model not supported
[ 1.264578] gre: GRE over IPv4 demultiplexor driver
[ 1.267443] NET: Registered PF_INET6 protocol family
[ 1.270237] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.285930] Segment Routing with IPv6
[ 1.288518] In-situ OAM (IOAM) with IPv6
[ 1.301214] Key type dns_resolver registered
[ 1.303163] IPI shorthand broadcast: enabled
[ 1.310256] sched_clock: Marking stable (1060579972, 240561457)->(1299804871, 1336558)
[ 1.325995] registered taskstats version 1
[ 1.327938] Loading compiled-in X.509 certificates
[ 1.389401] Freeing initrd memory: 9468K
[ 1.405676] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 1.411413] ata2: found unknown device (class 0)
[ 1.414806] Key type .fscrypt registered
[ 1.416233] Key type fscrypt-provisioning registered
[ 1.418740] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.427896] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.463727] Freeing unused kernel image (initmem) memory: 2768K
[ 1.465401] Write protecting the kernel read-only data: 24576k
[ 1.467837] Freeing unused kernel image (rodata/data gap) memory: 1096K
[ 1.469618] rodata_test: all tests were successful
[ 1.470893] Run /init as init process
[ 1.497708] Alpine Init 3.11.1-r0
Alpine Init 3.11.1-r0
[ 1.500884] Loading boot drivers...
* Loading boot drivers: [ 1.562143] ACPI: bus type USB registered
[ 1.563578] usbcore: registered new interface driver usbfs
[ 1.565034] usbcore: registered new interface driver hub
[ 1.566389] usbcore: registered new device driver usb
[ 1.579744] usbcore: registered new interface driver usb-storage
[ 1.817009] loop: module loaded
[ 1.917469] ACPI: bus type drm_connector registered
[ 1.972235] Loading boot drivers: ok.
ok.
[ 1.977272] Mounting root...
* Mounting root: [ 2.037579] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 2.039541] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 2.093539] [drm] Found bochs VGA, ID 0xb0c5.
[ 2.094666] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 2.100406] [drm] Found EDID data blob.
[ 2.103134] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 2.130725] Console: switching to colour frame buffer device 160x50
[ 2.135701] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 2.263664] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 2.265309] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.377917] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 2.381906] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 2.386812] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 2.390196] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.662279] block sr0: the capability attribute has been deprecated.
[ 6.547001] EXT4-fs (vda): mounted filesystem 8dd54871-29dc-4dc5-9103-cf8d3d81e40c ro with ordered data mode. Quota mode: none.
[ 6.550344] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.55.1 is starting up Linux 6.12.8-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5527/51200 files, 164508/204800 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 24.3.1 running 'init-local' at Sat, 02 Aug 2025 16:56:57 +0000. Up 12.63 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.1.0 starting
DUID 00:01:00:01:30:20:ff:db:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::5788:1d1e:4b12:3f9e/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 24.3.1 running 'init' at Sat, 02 Aug 2025 16:57:12 +0000. Up 27.95 seconds.
ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::5788:1d1e:4b12:3f9e/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | U |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UG |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:mtaix/tF09btTaVuTkPpl18fZZj5KVI2JmirCqMTBRE root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| Eo |
| . |
| . .|
| . .. . B.|
| . Soo.o=O =|
| . +...o=+.==|
| .o .= .... .*+*|
| .. ooo... .+.o=|
| .. .oo+. . o|
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:Ci8pfC0ux9Ng3MszmxvH6dbg9zVwSG3jH1YRifJ5/gM root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| .oo|
| . o ..|
| + = .|
| . * o.|
| ... S o =o |
| . +=.o.. E.o.|
| oo=+=o+o + o|
| .++o*=o o . o.|
| o..+*.. .. .|
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:e06xm2AxdF2+hB5s3Zc/EQzIktkF2fHbMGwaVE11Lqw root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| =.B=*+=|
| + O O.+=|
| . o B @++|
| . . o B =*|
| S . E .oo|
| + o .|
| + + |
| . = o |
| + |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 24.3.1 running 'modules:config' at Sat, 02 Aug 2025 16:57:15 +0000. Up 30.21 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 24.3.1 running 'modules:final' at Sat, 02 Aug 2025 16:57:16 +0000. Up 31.51 seconds.
2025-08-02 16:57:16,427 - modules.py[WARNING]: Could not find module named cc_reset_rmc (searched ['cc_reset_rmc', 'cloudinit.config.cc_reset_rmc'])
fetch https://dl-cdn.alpinelinux.org/alpine/v3.21/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.21/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20250619-r0)
Executing busybox-1.37.0-r9.trigger
Executing ca-certificates-20250619-r0.trigger
OK: 129 MiB in 143 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:Ci8pfC0ux9Ng3MszmxvH6dbg9zVwSG3jH1YRifJ5/gM root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:e06xm2AxdF2+hB5s3Zc/EQzIktkF2fHbMGwaVE11Lqw root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:mtaix/tF09btTaVuTkPpl18fZZj5KVI2JmirCqMTBRE root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBBX5dCaPgUE8O4RvZlNYO7wNdROh+h7mWnb5YkIg72jR6So3uCeEJ/jxzgXQCMpp+0nDLco5NVDLgHb2v4owNGM= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIE9OFy8wCwLQfPFWywyimDtijCuJMP/fY2U44OHaP8nQ root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.3.1 finished at Sat, 02 Aug 2025 16:57:18 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 34.07 seconds
[ ok ]
Welcome to Alpine Linux 3.21
Kernel 6.12.8-0-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
................
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.6-r2 -> 2.14.6-r3)
Executing busybox-1.37.0-r9.trigger
Continuing the upgrade transaction with new apk-tools:
(1/49) Upgrading musl (1.2.5-r8 -> 1.2.5-r9)
(2/49) Upgrading busybox (1.37.0-r9 -> 1.37.0-r12)
Executing busybox-1.37.0-r12.post-upgrade
(3/49) Upgrading busybox-binsh (1.37.0-r9 -> 1.37.0-r12)
(4/49) Upgrading busybox-mdev-openrc (1.37.0-r9 -> 1.37.0-r12)
(5/49) Upgrading alpine-release (3.21.2-r0 -> 3.21.4-r0)
(6/49) Upgrading ca-certificates-bundle (20241121-r1 -> 20250619-r0)
(7/49) Upgrading libcrypto3 (3.3.2-r4 -> 3.3.4-r0)
(8/49) Upgrading libssl3 (3.3.2-r4 -> 3.3.4-r0)
(9/49) Upgrading ssl_client (1.37.0-r9 -> 1.37.0-r12)
(10/49) Upgrading busybox-openrc (1.37.0-r9 -> 1.37.0-r12)
(11/49) Upgrading busybox-suid (1.37.0-r9 -> 1.37.0-r12)
(12/49) Upgrading musl-utils (1.2.5-r8 -> 1.2.5-r9)
(13/49) Upgrading alpine-base (3.21.2-r0 -> 3.21.4-r0)
(14/49) Upgrading libffi (3.4.6-r0 -> 3.4.7-r0)
(15/49) Upgrading libtasn1 (4.19.0-r2 -> 4.20.0-r0)
(16/49) Upgrading libblkid (2.40.2-r4 -> 2.40.4-r1)
(17/49) Upgrading blkid (2.40.2-r4 -> 2.40.4-r1)
(18/49) Upgrading libsmartcols (2.40.2-r4 -> 2.40.4-r1)
(19/49) Upgrading partx (2.40.2-r4 -> 2.40.4-r1)
(20/49) Upgrading libuuid (2.40.2-r4 -> 2.40.4-r1)
(21/49) Upgrading libfdisk (2.40.2-r4 -> 2.40.4-r1)
(22/49) Upgrading sfdisk (2.40.2-r4 -> 2.40.4-r1)
(23/49) Upgrading libexpat (2.6.4-r0 -> 2.7.0-r0)
(24/49) Upgrading xz-libs (5.6.3-r0 -> 5.6.3-r1)
(25/49) Upgrading sqlite-libs (3.47.1-r0 -> 3.48.0-r3)
(26/49) Upgrading python3 (3.12.8-r1 -> 3.12.11-r0)
(27/49) Upgrading python3-pycache-pyc0 (3.12.8-r1 -> 3.12.11-r0)
(28/49) Upgrading pyc (3.12.8-r1 -> 3.12.11-r0)
(29/49) Upgrading py3-jinja2 (3.1.5-r0 -> 3.1.6-r0)
(30/49) Upgrading py3-jinja2-pyc (3.1.5-r0 -> 3.1.6-r0)
(31/49) Upgrading py3-requests (2.32.3-r0 -> 2.32.4-r0)
(32/49) Upgrading py3-requests-pyc (2.32.3-r0 -> 2.32.4-r0)
(33/49) Upgrading tzdata (2024b-r1 -> 2025b-r0)
(34/49) Upgrading python3-pyc (3.12.8-r1 -> 3.12.11-r0)
(35/49) Upgrading dhcpcd (10.1.0-r0 -> 10.1.0-r1)
Executing dhcpcd-10.1.0-r1.post-upgrade
(36/49) Upgrading dhcpcd-openrc (10.1.0-r0 -> 10.1.0-r1)
(37/49) Upgrading device-mapper-libs (2.03.28-r2 -> 2.03.29-r1)
(38/49) Upgrading linux-virt (6.12.8-r0 -> 6.12.40-r0)
(39/49) Upgrading libmount (2.40.2-r4 -> 2.40.4-r1)
(40/49) Upgrading mount (2.40.2-r4 -> 2.40.4-r1)
(41/49) Upgrading openssh-keygen (9.9_p1-r2 -> 9.9_p2-r0)
(42/49) Upgrading openssh-client-common (9.9_p1-r2 -> 9.9_p2-r0)
(43/49) Upgrading openssh-client-default (9.9_p1-r2 -> 9.9_p2-r0)
(44/49) Upgrading openssh-sftp-server (9.9_p1-r2 -> 9.9_p2-r0)
(45/49) Upgrading openssh-server-common (9.9_p1-r2 -> 9.9_p2-r0)
(46/49) Upgrading openssh-server-common-openrc (9.9_p1-r2 -> 9.9_p2-r0)
(47/49) Upgrading openssh-server (9.9_p1-r2 -> 9.9_p2-r0)
Executing openssh-server-9.9_p2-r0.post-upgrade
(48/49) Upgrading openssh (9.9_p1-r2 -> 9.9_p2-r0)
(49/49) Upgrading openssh-server-pam (9.9_p1-r2 -> 9.9_p2-r0)
Executing busybox-1.37.0-r12.trigger
Executing ca-certificates-20250619-r0.trigger
Executing kmod-33-r2.trigger
Executing mkinitfs-3.11.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.12.40-0-virt
Executing syslinux-6.04_pre1-r16.trigger
/boot is device /dev/vda
OK: 129 MiB in 143 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.34.5-r0)
(3/10) Installing nghttp2-libs (1.64.0-r0)
(4/10) Installing libpsl (0.21.5-r3)
(5/10) Installing libcurl (8.12.1-r1)
(6/10) Installing pcre2 (10.43-r0)
(7/10) Installing git (2.47.3-r0)
(8/10) Installing git-init-template (2.47.3-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.37.0-r12.trigger
OK: 139 MiB in 153 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/usb-drivers.git usb-drivers
Cloning into 'usb-drivers'...
remote: Enumerating objects: 136, done.
remote: Counting objects: 100% (136/136), done.
remote: Compressing objects: 100% (135/135), done.
remote: Total 136 (delta 80), reused 0 (delta 0), pack-reused 0 (from 0)
Receiving objects: 100% (136/136), 102.41 KiB | 3.53 MiB/s, done.
Resolving deltas: 100% (80/80), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty) registered for path 'liberty'
Cloning into '/home/ci/usb-drivers/liberty'...
remote: Enumerating objects: 897, done.
remote: Counting objects: 100% (366/366), done.
remote: Compressing objects: 100% (363/363), done.
remote: Total 897 (delta 232), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (897/897), 436.02 KiB | 4.36 MiB/s, done.
Resolving deltas: 100% (553/553), done.
Submodule path 'liberty': checked out '9268fb8eba4a60499809965b3b69c2eb7e3798e7'
+ cd usb-drivers
+ git -c 'advice.detachedHead=false' checkout c6f47a098198f22922100346d13f054de4aace32
HEAD is now at c6f47a0 CMakeLists.txt: improve searching for hidapi
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=1.1.0-16-gc6f47a0
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/1.1.0-16-gc6f47a0/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake libusb-dev hidapi-dev
(1/29) Installing jansson (2.14-r4)
(2/29) Installing binutils (2.43.1-r3)
(3/29) Installing libmagic (5.46-r2)
(4/29) Installing file (5.46-r2)
(5/29) Installing libgomp (14.2.0-r4)
(6/29) Installing libatomic (14.2.0-r4)
(7/29) Installing isl26 (0.26-r1)
(8/29) Installing mpfr4 (4.2.1-r0)
(9/29) Installing mpc1 (1.3.1-r1)
(10/29) Installing gcc (14.2.0-r4)
(11/29) Installing libstdc++-dev (14.2.0-r4)
(12/29) Installing musl-dev (1.2.5-r9)
(13/29) Installing g++ (14.2.0-r4)
(14/29) Installing make (4.4.1-r2)
(15/29) Installing fortify-headers (1.1-r5)
(16/29) Installing patch (2.7.6-r10)
(17/29) Installing build-base (0.5-r3)
(18/29) Installing acl-libs (2.3.2-r1)
(19/29) Installing lz4-libs (1.10.0-r0)
(20/29) Installing libarchive (3.8.1-r0)
(21/29) Installing rhash-libs (1.4.5-r0)
(22/29) Installing libuv (1.49.2-r0)
(23/29) Installing cmake (3.31.1-r0)
(24/29) Installing eudev-libs (3.2.14-r5)
(25/29) Installing libusb (1.0.27-r0)
(26/29) Installing hidapi (0.14.0-r0)
(27/29) Installing pkgconf (2.3.0-r0)
(28/29) Installing hidapi-dev (0.14.0-r0)
(29/29) Installing libusb-dev (1.0.27-r0)
Executing busybox-1.37.0-r12.trigger
OK: 426 MiB in 182 packages
+ doas apk add --no-interactive mingw-w64-gcc rsvg-convert icoutils cmake make pkgconf curl libarchive-tools coreutils ncurses
(1/55) Installing coreutils-env (9.5-r2)
(2/55) Installing coreutils-fmt (9.5-r2)
(3/55) Installing coreutils-sha512sum (9.5-r2)
(4/55) Installing libattr (2.5.2-r2)
(5/55) Installing coreutils (9.5-r2)
(6/55) Installing curl (8.12.1-r1)
(7/55) Installing perl (5.40.1-r1)
(8/55) Installing perl-error (0.17029-r2)
(9/55) Installing perl-git (2.47.3-r0)
(10/55) Installing git-perl (2.47.3-r0)
(11/55) Installing perl-http-date (6.06-r0)
(12/55) Installing perl-clone (0.47-r0)
(13/55) Installing perl-uri (5.28-r0)
(14/55) Installing perl-io-html (1.004-r1)
(15/55) Installing perl-encode-locale (1.05-r5)
(16/55) Installing perl-lwp-mediatypes (6.04-r3)
(17/55) Installing perl-http-message (7.00-r0)
(18/55) Installing perl-http-cookies (6.11-r0)
(19/55) Installing perl-net-http (6.23-r1)
(20/55) Installing perl-html-tagset (3.24-r0)
(21/55) Installing perl-html-parser (3.83-r0)
(22/55) Installing perl-file-listing (6.16-r0)
(23/55) Installing perl-www-robotrules (6.02-r5)
(24/55) Installing perl-http-negotiate (6.01-r5)
(25/55) Installing perl-try-tiny (0.32-r0)
(26/55) Installing perl-libwww (6.77-r0)
(27/55) Installing libpng (1.6.47-r0)
(28/55) Installing icoutils (0.32.3-r3)
(29/55) Installing libarchive-tools (3.8.1-r0)
(30/55) Installing mingw-w64-binutils (2.43-r0)
(31/55) Installing mingw-w64-crt (12.0.0-r0)
(32/55) Installing mingw-w64-headers (12.0.0-r0)
(33/55) Installing mingw-w64-winpthreads (12.0.0-r0)
(34/55) Installing mingw-w64-gcc (14.2.0-r1)
(35/55) Installing ncurses (6.5_p20241006-r3)
(36/55) Installing libxau (1.0.11-r4)
(37/55) Installing libxdmcp (1.1.5-r1)
(38/55) Installing libxcb (1.16.1-r0)
(39/55) Installing libx11 (1.8.10-r0)
(40/55) Installing libxext (1.3.6-r2)
(41/55) Installing libxrender (0.9.11-r5)
(42/55) Installing freetype (2.13.3-r0)
(43/55) Installing fontconfig (2.15.0-r1)
(44/55) Installing pixman (0.43.4-r1)
(45/55) Installing cairo (1.18.4-r0)
(46/55) Installing libdav1d (1.5.0-r0)
(47/55) Installing libintl (0.22.5-r0)
(48/55) Installing glib (2.82.5-r0)
(49/55) Installing libxft (2.3.8-r3)
(50/55) Installing fribidi (1.0.16-r0)
(51/55) Installing graphite2 (1.3.14-r6)
(52/55) Installing harfbuzz (9.0.0-r1)
(53/55) Installing pango (1.54.0-r1)
(54/55) Installing libxml2 (2.13.4-r6)
(55/55) Installing rsvg-convert (2.59.2-r0)
Executing busybox-1.37.0-r12.trigger
Executing glib-2.82.5-r0.trigger
OK: 959 MiB in 237 packages
+ cmake -B build
-- The C compiler identification is GNU 14.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.3.0")
-- Checking for module 'libusb-1.0'
-- Found libusb-1.0, version 1.0.27
-- Configuring done (0.6s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/usb-drivers/build
+ cmake --build build -- package
[ 8%] Building C object CMakeFiles/elksmart-comm.dir/elksmart-comm.c.o
[ 16%] Linking C executable elksmart-comm
[ 16%] Built target elksmart-comm
[ 25%] Building C object CMakeFiles/razer-bw-te-ctl.dir/razer-bw-te-ctl.c.o
[ 33%] Linking C executable razer-bw-te-ctl
[ 33%] Built target razer-bw-te-ctl
[ 41%] Building C object CMakeFiles/eizoctl.dir/eizoctl.c.o
[ 50%] Linking C executable eizoctl
[ 50%] Built target eizoctl
[ 58%] Generating AsciiDoc man page for elksmart-comm
[ 66%] Generating roff man page for elksmart-comm
[ 75%] Generating AsciiDoc man page for razer-bw-te-ctl
[ 83%] Generating roff man page for razer-bw-te-ctl
[ 91%] Generating AsciiDoc man page for eizoctl
[100%] Generating roff man page for eizoctl
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build/usb-drivers-1.1.0-16-gc6f47a0-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build/usb-drivers-1.1.0-16-gc6f47a0-Linux-x86_64.zip generated.
+ sh -e ./Win64Depends.sh
-- Fetching repository DB
######################################################################### 100.0%
-- Resolving mingw-w64-x86_64-hidapi mingw-w64-x86_64-libusb
-- Fetching mingw-w64-x86_64-hidapi-0.15.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-gcc-libs-15.1.0-8-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libwinpthread-13.0.0.r91.gfc0b67305-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-tzdata-2025b-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libusb-1.0.28-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Verifying checksums
-- Extracting packages
-- Success
+ toolchain=/home/ci/usb-drivers/liberty/cmake/toolchains/MinGW-w64-x64.cmake
+ cmake -B build-Win64 '-DCMAKE_TOOLCHAIN_FILE=/home/ci/usb-drivers/liberty/cmake/toolchains/MinGW-w64-x64.cmake'
-- The C compiler identification is GNU 14.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/x86_64-w64-mingw32-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.3.0")
-- Checking for module 'libusb-1.0'
-- Found libusb-1.0, version 1.0.28
-- Checking for one of the modules 'hidapi;hidapi-hidraw;hidapi-libusb'
-- Configuring done (0.7s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/usb-drivers/build-Win64
+ cmake --build build-Win64 -- package
[ 8%] Building C object CMakeFiles/razer-bw-te-ctl.dir/razer-bw-te-ctl.c.obj
[ 16%] Linking C executable razer-bw-te-ctl.exe
[ 16%] Built target razer-bw-te-ctl
[ 25%] Building C object CMakeFiles/eizoctl.dir/eizoctl.c.obj
[ 33%] Linking C executable eizoctl.exe
[ 33%] Built target eizoctl
[ 41%] Generating eizoctltray 48x48 application icon
[ 50%] Generating eizoctltray 256x256 application icon
[ 58%] Generating eizoctltray 16x16 application icon
[ 66%] Generating eizoctltray 32x32 application icon
[ 75%] Generating Windows program icon
[ 83%] Building C object CMakeFiles/eizoctltray.dir/eizoctl.c.obj
[ 91%] Building RC object CMakeFiles/eizoctltray.dir/eizoctltray.rc.res
[100%] Linking C executable eizoctltray.exe
[100%] Built target eizoctltray
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build-Win64/usb-drivers-1.1.0-16-gc6f47a0-Windows-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build-Win64/usb-drivers-1.1.0-16-gc6f47a0-Windows-x86_64.zip generated.
+ mv build-Win64/usb-drivers-1.1.0-16-gc6f47a0-Windows-x86_64.zip /home/ci/acid-deploy
Deploy log
+ mv -- usb-drivers-1.1.0-16-gc6f47a0-Windows-x86_64.zip /home/acid/cd