- Project
- p/neetdraw
- Commit
- d47a97cd8efdcb0936ba83942aa1c1f0ecf9b077
- Runner
- Alpine 3.20
- State
- Success
- Notified
- 1
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7l[2J[0mSeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
[2Je%@)0(B[0;37;40m[?25l[2J[23;16HAlpine will be booted automatically in [0;1m1[0m seconds[23;16H[0;37;40mAlpine will be booted automatically in [0;1;37;40m1[0;37;40m seconds..[23;16H [23;16H[0;37;40m [?25h[24;1H[0m
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
c[?7l[2J[ 0.000000] Linux version 6.6.14-0-virt (buildozer@build-3-19-x86_64) (gcc (Alpine 13.2.1_git20231014) 13.2.1 20231014, GNU ld (GNU Binutils) 2.41) #1-Alpine SMP PREEMPT_DYNAMIC Fri, 26 Jan 2024 11:08:07 +0000
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1567530053 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000008] tsc: Detected 1696.074 MHz processor
[ 0.001081] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001118] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001122] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001431] RAMDISK: [mem 0x7f6f7000-0x7ffd9fff]
[ 0.001435] ACPI: Early table checksum verification disabled
[ 0.001440] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[ 0.001447] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001457] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001467] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001474] ACPI: FACS 0x000000007FFE0000 000040
[ 0.001480] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001486] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001492] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001497] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[ 0.001500] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[ 0.001501] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.001503] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[ 0.001504] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[ 0.001505] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[ 0.001601] Zone ranges:
[ 0.001603] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.001606] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.001608] Normal empty
[ 0.001610] Movable zone start for each node
[ 0.001611] Early memory node ranges
[ 0.001612] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.001614] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.001616] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.002035] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002065] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.012474] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.013175] ACPI: PM-Timer IO Port: 0x608
[ 0.013197] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.013261] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.013267] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013270] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.013272] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013274] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.013275] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.013283] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013285] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013293] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.013318] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.013340] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.013342] Booting paravirtualized kernel on KVM
[ 0.013344] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.020423] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.021073] percpu: Embedded 57 pages/cpu s195048 r8192 d30232 u1048576
[ 0.021125] kvm-guest: PV spinlocks disabled, no host support
[ 0.021126] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.021211] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.021783] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.022284] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.022386] Built 1 zonelists, mobility grouping on. Total pages: 515802
[ 0.023037] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.029696] Memory: 2017152K/2096608K available (12288K kernel code, 1744K rwdata, 8008K rodata, 2636K init, 2300K bss, 79196K reserved, 0K cma-reserved)
[ 0.040705] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.040858] Kernel/User page tables isolation: enabled
[ 0.042089] Dynamic Preempt: none
[ 0.042233] rcu: Preemptible hierarchical RCU implementation.
[ 0.042234] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.042237] Trampoline variant of Tasks RCU enabled.
[ 0.042237] Tracing variant of Tasks RCU enabled.
[ 0.042238] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.042240] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.047250] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.047503] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.047708] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.055617] Console: colour VGA+ 80x25
[ 0.055681] printk: console [ttyS0] enabled
[ 0.213039] ACPI: Core revision 20230628
[ 0.214602] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.217395] APIC: Switch to symmetric I/O mode setup
[ 0.219527] x2apic enabled
[ 0.220944] APIC: Switched APIC routing to: physical x2apic
[ 0.224562] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.226585] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.230110] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960740)
[ 0.232351] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.233580] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.234999] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.236987] Spectre V2 : Mitigation: Retpolines
[ 0.240110] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.242814] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.245007] Speculative Store Bypass: Vulnerable
[ 0.246520] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.248655] MMIO Stale Data: Unknown: No mitigations
[ 0.250112] x86/fpu: x87 FPU will use FXSAVE
[ 0.274360] Freeing SMP alternatives memory: 32K
[ 0.275908] pid_max: default: 32768 minimum: 301
[ 0.278356] LSM: initializing lsm=capability,landlock,lockdown,integrity
[ 0.281683] landlock: Up and running.
[ 0.283149] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.285568] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.409661] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.410105] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.410105] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.410105] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.410105] signal: max sigframe size: 1440
[ 0.410105] rcu: Hierarchical SRCU implementation.
[ 0.410109] rcu: Max phase no-delay instances is 1000.
[ 0.411726] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.413183] smp: Bringing up secondary CPUs ...
[ 0.414446] smpboot: x86: Booting SMP configuration:
[ 0.415660] .... node #0, CPUs: #1
[ 0.427560] smp: Brought up 1 node, 2 CPUs
[ 0.431192] smpboot: Max logical packages: 1
[ 0.432301] ----------------
[ 0.433046] | NMI testsuite:
[ 0.433967] --------------------
[ 0.435053] remote IPI: ok |
[ 0.435087] local IPI: ok |
[ 0.435087] --------------------
[ 0.435087] Good, all 2 testcases passed! |
[ 0.440112] ---------------------------------
[ 0.441563] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.444125] devtmpfs: initialized
[ 0.444125] x86/mm: Memory block size: 128MB
[ 0.444125] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.450122] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.454141] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.456276] audit: initializing netlink subsys (disabled)
[ 0.458128] audit: type=2000 audit(1712748586.366:1): state=initialized audit_enabled=0 res=1
[ 0.458128] thermal_sys: Registered thermal governor 'step_wise'
[ 0.460142] cpuidle: using governor ladder
[ 0.463461] cpuidle: using governor menu
[ 0.464919] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.467458] PCI: Using configuration type 1 for base access
[ 0.470346] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.480954] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.482381] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.484497] ACPI: Added _OSI(Module Device)
[ 0.484497] ACPI: Added _OSI(Processor Device)
[ 0.484497] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.490113] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.492705] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.496025] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.496025] ACPI: Interpreter enabled
[ 0.500128] ACPI: PM: (supports S0 S3 S5)
[ 0.501445] ACPI: Using IOAPIC for interrupt routing
[ 0.503112] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.506082] PCI: Using E820 reservations for host bridge windows
[ 0.508149] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.513325] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.515378] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.517890] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.520143] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.524279] acpiphp: Slot [3] registered
[ 0.525602] acpiphp: Slot [4] registered
[ 0.526920] acpiphp: Slot [5] registered
[ 0.528248] acpiphp: Slot [6] registered
[ 0.530138] acpiphp: Slot [7] registered
[ 0.531466] acpiphp: Slot [8] registered
[ 0.532784] acpiphp: Slot [9] registered
[ 0.534089] acpiphp: Slot [10] registered
[ 0.535439] acpiphp: Slot [11] registered
[ 0.536774] acpiphp: Slot [12] registered
[ 0.538132] acpiphp: Slot [13] registered
[ 0.539473] acpiphp: Slot [14] registered
[ 0.540136] acpiphp: Slot [15] registered
[ 0.541482] acpiphp: Slot [16] registered
[ 0.542816] acpiphp: Slot [17] registered
[ 0.544163] acpiphp: Slot [18] registered
[ 0.545500] acpiphp: Slot [19] registered
[ 0.546925] acpiphp: Slot [20] registered
[ 0.548286] acpiphp: Slot [21] registered
[ 0.550137] acpiphp: Slot [22] registered
[ 0.551506] acpiphp: Slot [23] registered
[ 0.552843] acpiphp: Slot [24] registered
[ 0.554180] acpiphp: Slot [25] registered
[ 0.555534] acpiphp: Slot [26] registered
[ 0.556874] acpiphp: Slot [27] registered
[ 0.558238] acpiphp: Slot [28] registered
[ 0.560147] acpiphp: Slot [29] registered
[ 0.561486] acpiphp: Slot [30] registered
[ 0.562834] acpiphp: Slot [31] registered
[ 0.564160] PCI host bridge to bus 0000:00
[ 0.565511] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.567714] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.569924] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.570110] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.572533] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.575024] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.576892] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.580812] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.583673] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.590112] pci 0000:00:01.1: reg 0x20: [io 0xc120-0xc12f]
[ 0.593742] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.596077] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.598584] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.600110] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.602551] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.605218] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.607586] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.610458] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.615285] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.620691] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 0.629379] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.630326] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.633083] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.635952] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc11f]
[ 0.640111] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 0.646190] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.650112] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.654672] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.660112] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.663633] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 0.670113] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.676508] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.680987] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0ff]
[ 0.683942] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[ 0.690838] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.699271] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.700289] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.702430] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.704558] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.707173] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.710623] iommu: Default domain type: Translated
[ 0.712217] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.714459] SCSI subsystem initialized
[ 0.715759] pps_core: LinuxPPS API ver. 1 registered
[ 0.715759] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.715759] PTP clock support registered
[ 0.720619] PCI: Using ACPI for IRQ routing
[ 0.721935] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.722161] clocksource: Switched to clocksource kvm-clock
[ 0.725557] VFS: Disk quotas dquot_6.6.0
[ 0.726702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.728571] pnp: PnP ACPI init
[ 0.729894] pnp: PnP ACPI: found 6 devices
[ 0.738555] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.741057] NET: Registered PF_INET protocol family
[ 0.742410] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.745619] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.747837] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.749818] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.751927] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.754069] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.755793] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.757519] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.759460] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.760969] NET: Registered PF_XDP protocol family
[ 0.762251] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.764562] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.766660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.768895] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.771139] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.773571] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.775463] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.777541] PCI: CLS 0 bytes, default 64
[ 0.778953] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.779089] Unpacking initramfs...
[ 0.783178] Initialise system trusted keyrings
[ 0.785868] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.790073] zbud: loaded
[ 0.791230] Key type asymmetric registered
[ 0.792525] Asymmetric key parser 'x509' registered
[ 0.794181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.796724] io scheduler mq-deadline registered
[ 0.798142] io scheduler kyber registered
[ 0.799530] io scheduler bfq registered
[ 0.802860] ERST DBG: ERST support is disabled.
[ 0.844091] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.872093] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.927324] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.931068] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.933600] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.938437] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.942246] scsi host0: ata_piix
[ 0.944000] scsi host1: ata_piix
[ 0.945208] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 0.947454] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 0.950030] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.954738] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.956419] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.958182] rtc_cmos 00:05: RTC can wake from S4
[ 0.961591] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.965230] rtc_cmos 00:05: registered as rtc0
[ 0.966844] rtc_cmos 00:05: setting system clock to 2024-04-10T11:29:46 UTC (1712748586)
[ 0.969614] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.972097] intel_pstate: CPU model not supported
[ 0.973879] gre: GRE over IPv4 demultiplexor driver
[ 0.979950] Freeing initrd memory: 9100K
[ 0.995701] Key type dns_resolver registered
[ 0.997084] IPI shorthand broadcast: enabled
[ 1.001412] sched_clock: Marking stable (833071565, 162591075)->(1007693414, -12030774)
[ 1.010380] registered taskstats version 1
[ 1.011952] Loading compiled-in X.509 certificates
[ 1.021805] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 1.027387] Key type .fscrypt registered
[ 1.028697] Key type fscrypt-provisioning registered
[ 1.112922] ata2: found unknown device (class 0)
[ 1.114898] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.123740] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.164438] Freeing unused kernel image (initmem) memory: 2636K
[ 1.202703] Write protecting the kernel read-only data: 20480k
[ 1.204209] Freeing unused kernel image (rodata/data gap) memory: 184K
[ 1.205737] rodata_test: all tests were successful
[ 1.206985] Run /init as init process
[ 1.225214] Alpine Init 3.9.1-r0
Alpine Init 3.9.1-r0
[ 1.227295] Loading boot drivers...
* Loading boot drivers: [ 1.278095] ACPI: bus type USB registered
[ 1.279219] usbcore: registered new interface driver usbfs
[ 1.280642] usbcore: registered new interface driver hub
[ 1.282011] usbcore: registered new device driver usb
[ 1.293027] usbcore: registered new interface driver usb-storage
[ 1.474827] loop: module loaded
[ 1.524332] ACPI: bus type drm_connector registered
[ 1.564123] Loading boot drivers: ok.
ok.
[ 1.567946] Mounting root...
* Mounting root: [ 1.621155] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.646561] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.647722] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.652368] [drm] Found EDID data blob.
[ 1.653821] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 1.674253] Console: switching to colour frame buffer device 160x50
[ 1.677862] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.793724] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.794892] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.881908] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 1.884494] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.888597] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 1.890985] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.043372] block sr0: the capability attribute has been deprecated.
[ 4.907990] EXT4-fs (vda): mounted filesystem 82b97a91-8270-4580-9e13-82ce10d47555 ro with ordered data mode. Quota mode: none.
[ 4.910555] Mounting root: ok.
ok.
OpenRC 0.52.1 is starting up Linux 6.6.14-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 6031/46000 files, 165032/184320 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
Cloud-init v. 23.4 running 'init-local' at Wed, 10 Apr 2024 11:29:56 +0000. Up 10.73 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ... [ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
Cloud-init v. 23.4 running 'init' at Wed, 10 Apr 2024 11:30:08 +0000. Up 22.99 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::5054:ff:fe12:3456/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
2024-04-10 11:30:08,795 - log.py[DEPRECATED]: Deprecated cloud-config provided:
chpasswd.list: List of ``username:password`` pairs. Each user will have the corresponding password set. A password can be randomly generated by specifying ``RANDOM`` or ``R`` as a user's password. A hashed password, created by a tool like ``mkpasswd``, can be specified. A regex (``r'\$(1|2a|2y|5|6)(\$.+){2}'``) is used to determine if a password value should be treated as a hash. Deprecated in version 22.2. Use ``users`` instead.
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:3Dz/qJIG/oaLBU29v3q5tW/nnSphnIdkyHIZGdl6VO8 root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| .= .. |
| . + o . |
| . o * . |
| o o X + . |
| . . S O o E |
| .. . O . |
| ..o .o.= |
| oo = o+ +. +|
| . .=o++o++++o|
+----[SHA256]-----+
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub
The key fingerprint is:
SHA256:/XrSaDUv72V97K+1k/VlQ2Zdn5scvaET+D/i+/Ft28s root@alpine-ci
The key's randomart image is:
+---[DSA 1024]----+
| |
| .|
| . *|
| . . . B+|
| S . . B *|
| .o+ B=|
| +.ooo&|
| +.+.oXX|
| ..o.*BE%|
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:f+N1mpPtnh9fL6PfJddkmGboT9L7kEt7+b4Jq1BVEGM root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| Eo. |
| . o |
| . |
| .. o |
| S .. = o|
| ... + +.|
| .. =.O+B|
| .o BB&@|
| .++O&#|
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:ozgXOuJCLobEkUCR11hjI56LsYJjOQBKyOjKuaNWcWQ root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
|*+o.+= |
|Bo.o+Eo |
|=.ooo |
|o+=... |
|B*o.o . S |
|+B.. o o . |
|= + = o |
|+B . + |
|*.o |
+----[SHA256]-----+
[ ok ]
Cloud-init v. 23.4 running 'modules:config' at Wed, 10 Apr 2024 11:30:11 +0000. Up 25.76 seconds.
2024-04-10 11:30:11,467 - log.py[DEPRECATED]: Config key 'lists' is deprecated in 22.3 and scheduled to be removed in 27.3. Use 'users' instead.
2024-04-10 11:30:11,471 - log.py[DEPRECATED]: The chpasswd multiline string is deprecated in 22.2 and scheduled to be removed in 27.2. Use string type instead.
[ ok ]
Cloud-init v. 23.4 running 'modules:final' at Wed, 10 Apr 2024 11:30:12 +0000. Up 26.86 seconds.
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240226-r0)
Executing busybox-1.36.1-r15.trigger
Executing ca-certificates-20240226-r0.trigger
OK: 147 MiB in 152 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 1024 SHA256:/XrSaDUv72V97K+1k/VlQ2Zdn5scvaET+D/i+/Ft28s root@alpine-ci (DSA)
cloud-init: 256 SHA256:f+N1mpPtnh9fL6PfJddkmGboT9L7kEt7+b4Jq1BVEGM root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:ozgXOuJCLobEkUCR11hjI56LsYJjOQBKyOjKuaNWcWQ root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:3Dz/qJIG/oaLBU29v3q5tW/nnSphnIdkyHIZGdl6VO8 root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBDkHKgJTV24xka++9Gtq7/LHbwnJS8ZPNg5xAqIKPSTvha17bngrg7zZBEgyGlBGAgfeOzhcCQQ45B8j0Bhs3Po= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIGx0FxjZTmvPoJ0y1HFGNPvHHpuqO0DwSaTrFdlWJFQE root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 23.4 finished at Wed, 10 Apr 2024 11:30:14 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net]. Up 29.17 seconds
[ ok ]
Welcome to Alpine Linux 3.19
Kernel 6.6.14-0-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
.........
status: done
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.0-r5 -> 2.14.3-r1)
Executing busybox-1.36.1-r15.trigger
Continuing the upgrade transaction with new apk-tools:
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/community/x86_64/APKINDEX.tar.gz
(1/17) Upgrading ca-certificates-bundle (20230506-r0 -> 20240226-r0)
(2/17) Upgrading libcrypto3 (3.1.4-r5 -> 3.1.4-r6)
(3/17) Upgrading libssl3 (3.1.4-r5 -> 3.1.4-r6)
(4/17) Upgrading gnutls (3.8.3-r0 -> 3.8.4-r0)
(5/17) Upgrading libexpat (2.5.0-r2 -> 2.6.2-r0)
(6/17) Upgrading python3 (3.11.6-r1 -> 3.11.8-r0)
(7/17) Upgrading python3-pycache-pyc0 (3.11.6-r1 -> 3.11.8-r0)
(8/17) Upgrading pyc (3.11.6-r1 -> 3.11.8-r0)
(9/17) Installing py3-netifaces (0.11.0-r2)
(10/17) Upgrading py3-certifi (2023.7.22-r0 -> 2024.2.2-r0)
(11/17) Upgrading py3-certifi-pyc (2023.7.22-r0 -> 2024.2.2-r0)
(12/17) Upgrading tzdata (2023d-r0 -> 2024a-r0)
(13/17) Upgrading cloud-init-pyc (23.4-r0 -> 23.4.4-r1)
(14/17) Upgrading python3-pyc (3.11.6-r1 -> 3.11.8-r0)
(15/17) Upgrading cloud-init (23.4-r0 -> 23.4.4-r1)
(16/17) Upgrading cloud-init-openrc (23.4-r0 -> 23.4.4-r1)
(17/17) Upgrading linux-virt (6.6.14-r0 -> 6.6.25-r0)
Executing busybox-1.36.1-r15.trigger
Executing ca-certificates-20240226-r0.trigger
Executing kmod-31-r2.trigger
Executing mkinitfs-3.9.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.25-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 147 MiB in 153 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/8) Installing brotli-libs (1.1.0-r1)
(2/8) Installing c-ares (1.27.0-r0)
(3/8) Installing nghttp2-libs (1.58.0-r0)
(4/8) Installing libcurl (8.5.0-r0)
(5/8) Installing pcre2 (10.42-r2)
(6/8) Installing git (2.43.0-r0)
(7/8) Installing gnu-libiconv-libs (1.17-r2)
(8/8) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r15.trigger
OK: 157 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/neetdraw.git neetdraw
Cloning into 'neetdraw'...
remote: Enumerating objects: 264, done.
remote: Counting objects: 100% (27/27), done.
remote: Compressing objects: 100% (27/27), done.
remote: Total 264 (delta 12), reused 0 (delta 0), pack-reused 237 (from 1)
Receiving objects: 100% (264/264), 91.75 KiB | 3.99 MiB/s, done.
Resolving deltas: 100% (155/155), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Submodule 'termo' (https://git.janouch.name/p/termo.git) registered for path 'termo'
Cloning into '/home/ci/neetdraw/liberty'...
remote: Enumerating objects: 741, done.
remote: Counting objects: 100% (210/210), done.
remote: Compressing objects: 100% (207/207), done.
remote: Total 741 (delta 122), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (741/741), 380.52 KiB | 5.68 MiB/s, done.
Resolving deltas: 100% (443/443), done.
Cloning into '/home/ci/neetdraw/termo'...
remote: Enumerating objects: 1974, done.
remote: Counting objects: 100% (35/35), done.
remote: Compressing objects: 100% (34/34), done.
remote: Total 1974 (delta 12), reused 0 (delta 0), pack-reused 1939 (from 1)
Receiving objects: 100% (1974/1974), 1.38 MiB | 8.16 MiB/s, done.
Resolving deltas: 100% (1257/1257), done.
Submodule path 'liberty': checked out '29bf109a51951e9c6d94bd2fedffb405bead849c'
Submodule path 'termo': checked out '8265f075b176b33680012094aa1ced5721e55ac9'
+ cd neetdraw
+ git -c 'advice.detachedHead=false' checkout d47a97cd8efdcb0936ba83942aa1c1f0ecf9b077
HEAD is now at d47a97c CMakeLists.txt: declare compatibility with 3.27
+ doas apk add --no-interactive build-base cmake libev-dev ncurses-dev
(1/30) Installing jansson (2.14-r4)
(2/30) Installing binutils (2.41-r0)
(3/30) Installing libmagic (5.45-r1)
(4/30) Installing file (5.45-r1)
(5/30) Installing libgomp (13.2.1_git20231014-r0)
(6/30) Installing libatomic (13.2.1_git20231014-r0)
(7/30) Installing isl26 (0.26-r1)
(8/30) Installing mpfr4 (4.2.1-r0)
(9/30) Installing mpc1 (1.3.1-r1)
(10/30) Installing gcc (13.2.1_git20231014-r0)
(11/30) Installing libstdc++-dev (13.2.1_git20231014-r0)
(12/30) Installing musl-dev (1.2.4_git20230717-r4)
(13/30) Installing libc-dev (0.7.2-r5)
(14/30) Installing g++ (13.2.1_git20231014-r0)
(15/30) Installing make (4.4.1-r2)
(16/30) Installing fortify-headers (1.1-r3)
(17/30) Installing patch (2.7.6-r10)
(18/30) Installing build-base (0.5-r3)
(19/30) Installing lz4-libs (1.9.4-r5)
(20/30) Installing libarchive (3.7.2-r1)
(21/30) Installing rhash-libs (1.4.4-r0)
(22/30) Installing libuv (1.47.0-r0)
(23/30) Installing cmake (3.27.8-r0)
(24/30) Installing libev (4.33-r1)
(25/30) Installing pkgconf (2.1.0-r0)
(26/30) Installing libev-dev (4.33-r1)
(27/30) Installing libformw (6.4_p20231125-r0)
(28/30) Installing libmenuw (6.4_p20231125-r0)
(29/30) Installing libncurses++ (6.4_p20231125-r0)
(30/30) Installing ncurses-dev (6.4_p20231125-r0)
Executing busybox-1.36.1-r15.trigger
OK: 428 MiB in 191 packages
+ cmake -B build
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.1.0")
-- Found LibEV: ev
-- Found Ncursesw: ncursesw
CMake Deprecation Warning at termo/CMakeLists.txt:1 (cmake_minimum_required):
Compatibility with CMake < 3.5 will be removed from a future version of
CMake.
Update the VERSION argument <min> value or use a ...<max> suffix to tell
CMake that the project does not need compatibility with older versions.
-- Found Curses: /usr/lib/libcurses.so
-- Checking for modules 'glib-2.0;gio-2.0'
-- Package 'glib-2.0', required by 'virtual:world', not found
-- Package 'gio-2.0', required by 'virtual:world', not found
-- Checking for module 'unibilium>=0.1.0'
-- Package 'unibilium', required by 'virtual:world', not found
-- Looking for resizeterm
-- Looking for resizeterm - not found
-- Configuring done (0.9s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/neetdraw/build
+ cmake --build build -- package
[ 16%] [32mBuilding C object termo/CMakeFiles/termo-static.dir/termo.c.o[0m
[ 33%] [32mBuilding C object termo/CMakeFiles/termo-static.dir/driver-csi.c.o[0m
[ 50%] [32mBuilding C object termo/CMakeFiles/termo-static.dir/driver-ti.c.o[0m
[ 66%] [32m[1mLinking C static library libtermo-0.a[0m
[ 66%] Built target termo-static
[ 83%] [32mBuilding C object CMakeFiles/neetdraw.dir/neetdraw.c.o[0m
[100%] [32m[1mLinking C executable neetdraw[0m
[100%] Built target neetdraw
[36mRun CPack packaging tool...[0m
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: neetdraw
CPack: - Install project: neetdraw []
CPack: Create package
CPack: - package: /home/ci/neetdraw/build/neetdraw--Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: neetdraw
CPack: - Install project: neetdraw []
CPack: Create package
CPack: - package: /home/ci/neetdraw/build/neetdraw--Linux-x86_64.zip generated.