- Project
- p/pdf-simple-sign
- Commit
- 147b8805247ca23fb96e51694f78439ab24f93a2
- Runner
- Alpine 3.19
- State
- Success
- Notified
- 1
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7l[2J[0mSeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
[2Je%@)0(B[0;37;40m[?25l[2J[23;16HAlpine will be booted automatically in [0;1m1[0m seconds[23;16H[0;37;40mAlpine will be booted automatically in [0;1;37;40m1[0;37;40m seconds..[23;16H [23;16H[0;37;40m [?25h[24;1H[0m
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
c[?7l[2J[ 0.000000] Linux version 6.6.14-0-virt (buildozer@build-3-19-x86_64) (gcc (Alpine 13.2.1_git20231014) 13.2.1 20231014, GNU ld (GNU Binutils) 2.41) #1-Alpine SMP PREEMPT_DYNAMIC Fri, 26 Jan 2024 11:08:07 +0000
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1627827459 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000008] tsc: Detected 1696.074 MHz processor
[ 0.001100] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001136] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001140] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001442] RAMDISK: [mem 0x7f6f7000-0x7ffd9fff]
[ 0.001446] ACPI: Early table checksum verification disabled
[ 0.001451] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[ 0.001458] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001468] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001477] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001483] ACPI: FACS 0x000000007FFE0000 000040
[ 0.001489] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001495] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001500] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001505] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[ 0.001507] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[ 0.001509] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.001510] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[ 0.001511] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[ 0.001512] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[ 0.001996] Zone ranges:
[ 0.001998] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.002001] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.002004] Normal empty
[ 0.002005] Movable zone start for each node
[ 0.002006] Early memory node ranges
[ 0.002007] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.002010] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.002012] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.002394] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002423] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.012255] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.012933] ACPI: PM-Timer IO Port: 0x608
[ 0.012953] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.013014] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.013019] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013022] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.013024] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013026] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.013028] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.013035] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013038] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013045] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.013069] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.013092] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.013094] Booting paravirtualized kernel on KVM
[ 0.013096] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.019935] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.020559] percpu: Embedded 57 pages/cpu s195048 r8192 d30232 u1048576
[ 0.020628] kvm-guest: PV spinlocks disabled, no host support
[ 0.020629] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.020713] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.021291] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.021779] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.021879] Built 1 zonelists, mobility grouping on. Total pages: 515802
[ 0.022517] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.029130] Memory: 2017148K/2096608K available (12288K kernel code, 1744K rwdata, 8008K rodata, 2636K init, 2300K bss, 79200K reserved, 0K cma-reserved)
[ 0.040165] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.040317] Kernel/User page tables isolation: enabled
[ 0.041536] Dynamic Preempt: none
[ 0.041681] rcu: Preemptible hierarchical RCU implementation.
[ 0.041683] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.041685] Trampoline variant of Tasks RCU enabled.
[ 0.041686] Tracing variant of Tasks RCU enabled.
[ 0.041687] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.041688] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.046643] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.046885] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.047079] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.054962] Console: colour VGA+ 80x25
[ 0.055024] printk: console [ttyS0] enabled
[ 0.216800] ACPI: Core revision 20230628
[ 0.218377] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.220954] APIC: Switch to symmetric I/O mode setup
[ 0.222643] x2apic enabled
[ 0.223875] APIC: Switched APIC routing to: physical x2apic
[ 0.226969] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.228423] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.230884] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960740)
[ 0.240983] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.242275] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.243650] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.245628] Spectre V2 : Mitigation: Retpolines
[ 0.246680] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.248632] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.250884] Speculative Store Bypass: Vulnerable
[ 0.251976] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.253655] MMIO Stale Data: Unknown: No mitigations
[ 0.254946] x86/fpu: x87 FPU will use FXSAVE
[ 0.279135] Freeing SMP alternatives memory: 32K
[ 0.280349] pid_max: default: 32768 minimum: 301
[ 0.281827] LSM: initializing lsm=capability,landlock,lockdown,integrity
[ 0.285135] landlock: Up and running.
[ 0.286371] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.288252] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.412015] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.415372] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.417831] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.420507] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.420925] signal: max sigframe size: 1440
[ 0.422379] rcu: Hierarchical SRCU implementation.
[ 0.423954] rcu: Max phase no-delay instances is 1000.
[ 0.426058] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.428112] smp: Bringing up secondary CPUs ...
[ 0.431093] smpboot: x86: Booting SMP configuration:
[ 0.432739] .... node #0, CPUs: #1
[ 0.444203] smp: Brought up 1 node, 2 CPUs
[ 0.444203] smpboot: Max logical packages: 1
[ 0.445014] ----------------
[ 0.450887] | NMI testsuite:
[ 0.451840] --------------------
[ 0.452910] remote IPI: ok |
[ 0.452945] local IPI: ok |
[ 0.453032] --------------------
[ 0.454121] Good, all 2 testcases passed! |
[ 0.455544] ---------------------------------
[ 0.456979] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.461342] devtmpfs: initialized
[ 0.462087] x86/mm: Memory block size: 128MB
[ 0.463898] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.464245] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.472730] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.474882] audit: initializing netlink subsys (disabled)
[ 0.476731] audit: type=2000 audit(1712748715.427:1): state=initialized audit_enabled=0 res=1
[ 0.476731] thermal_sys: Registered thermal governor 'step_wise'
[ 0.476731] cpuidle: using governor ladder
[ 0.481993] cpuidle: using governor menu
[ 0.483189] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.485279] PCI: Using configuration type 1 for base access
[ 0.486996] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.491245] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.497021] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.501362] ACPI: Added _OSI(Module Device)
[ 0.502428] ACPI: Added _OSI(Processor Device)
[ 0.503473] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.504591] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.506013] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.506013] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.511044] ACPI: Interpreter enabled
[ 0.512041] ACPI: PM: (supports S0 S3 S5)
[ 0.513115] ACPI: Using IOAPIC for interrupt routing
[ 0.514428] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.516783] PCI: Using E820 reservations for host bridge windows
[ 0.518470] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.523751] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.525349] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.527380] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.529929] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.531415] acpiphp: Slot [3] registered
[ 0.532497] acpiphp: Slot [4] registered
[ 0.533536] acpiphp: Slot [5] registered
[ 0.534613] acpiphp: Slot [6] registered
[ 0.535659] acpiphp: Slot [7] registered
[ 0.536713] acpiphp: Slot [8] registered
[ 0.537779] acpiphp: Slot [9] registered
[ 0.538826] acpiphp: Slot [10] registered
[ 0.540910] acpiphp: Slot [11] registered
[ 0.541999] acpiphp: Slot [12] registered
[ 0.543058] acpiphp: Slot [13] registered
[ 0.544116] acpiphp: Slot [14] registered
[ 0.545204] acpiphp: Slot [15] registered
[ 0.546284] acpiphp: Slot [16] registered
[ 0.547338] acpiphp: Slot [17] registered
[ 0.548394] acpiphp: Slot [18] registered
[ 0.549477] acpiphp: Slot [19] registered
[ 0.550910] acpiphp: Slot [20] registered
[ 0.551979] acpiphp: Slot [21] registered
[ 0.553057] acpiphp: Slot [22] registered
[ 0.554167] acpiphp: Slot [23] registered
[ 0.555248] acpiphp: Slot [24] registered
[ 0.556363] acpiphp: Slot [25] registered
[ 0.557420] acpiphp: Slot [26] registered
[ 0.558481] acpiphp: Slot [27] registered
[ 0.559675] acpiphp: Slot [28] registered
[ 0.560917] acpiphp: Slot [29] registered
[ 0.561980] acpiphp: Slot [30] registered
[ 0.563062] acpiphp: Slot [31] registered
[ 0.564145] PCI host bridge to bus 0000:00
[ 0.565199] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.566957] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.568686] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.570884] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.572815] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.574786] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.576304] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.578532] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.581183] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.586506] pci 0000:00:01.1: reg 0x20: [io 0xc120-0xc12f]
[ 0.589574] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.590887] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.592613] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.594436] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.596448] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.598715] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.600899] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.603101] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.607514] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.613092] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 0.623666] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.625618] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.628470] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.632299] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc11f]
[ 0.635562] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 0.642155] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.646047] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.649594] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.654540] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.661579] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 0.671731] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.677428] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.683485] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0ff]
[ 0.686397] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[ 0.695574] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.705347] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.708027] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.711141] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.713376] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.715518] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.718310] iommu: Default domain type: Translated
[ 0.720884] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.723338] SCSI subsystem initialized
[ 0.724648] pps_core: LinuxPPS API ver. 1 registered
[ 0.724648] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.724648] PTP clock support registered
[ 0.724648] PCI: Using ACPI for IRQ routing
[ 0.731011] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.732607] clocksource: Switched to clocksource kvm-clock
[ 0.739660] VFS: Disk quotas dquot_6.6.0
[ 0.740878] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.741767] pnp: PnP ACPI init
[ 0.743276] pnp: PnP ACPI: found 6 devices
[ 0.755042] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.758370] NET: Registered PF_INET protocol family
[ 0.759869] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.763105] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.765383] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.767406] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.770140] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.772757] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.775119] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.777468] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.780041] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.781991] NET: Registered PF_XDP protocol family
[ 0.783472] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.785380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.787299] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.789407] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.791783] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.794494] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.796596] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.798581] PCI: CLS 0 bytes, default 64
[ 0.799925] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.800057] Unpacking initramfs...
[ 0.803235] Initialise system trusted keyrings
[ 0.809556] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.811916] zbud: loaded
[ 0.813134] Key type asymmetric registered
[ 0.814732] Asymmetric key parser 'x509' registered
[ 0.816662] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.819503] io scheduler mq-deadline registered
[ 0.820981] io scheduler kyber registered
[ 0.822334] io scheduler bfq registered
[ 0.830464] ERST DBG: ERST support is disabled.
[ 0.887223] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.938054] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.984210] Freeing initrd memory: 9100K
[ 0.993889] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.997780] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.000222] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.004479] VMware PVSCSI driver - version 1.0.7.0-k
[ 1.008112] scsi host0: ata_piix
[ 1.009749] scsi host1: ata_piix
[ 1.010953] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 1.013150] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 1.015614] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.019596] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.021257] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.022958] rtc_cmos 00:05: RTC can wake from S4
[ 1.026042] rtc_cmos 00:05: registered as rtc0
[ 1.027236] rtc_cmos 00:05: setting system clock to 2024-04-10T11:31:55 UTC (1712748715)
[ 1.029269] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.031063] intel_pstate: CPU model not supported
[ 1.032331] gre: GRE over IPv4 demultiplexor driver
[ 1.047604] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.052837] Key type dns_resolver registered
[ 1.054056] IPI shorthand broadcast: enabled
[ 1.058748] sched_clock: Marking stable (880014766, 173982991)->(1057839693, -3841936)
[ 1.069076] registered taskstats version 1
[ 1.070242] Loading compiled-in X.509 certificates
[ 1.078478] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 1.082835] Key type .fscrypt registered
[ 1.083807] Key type fscrypt-provisioning registered
[ 1.184292] ata2: found unknown device (class 0)
[ 1.185958] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.194967] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.235703] Freeing unused kernel image (initmem) memory: 2636K
[ 1.274080] Write protecting the kernel read-only data: 20480k
[ 1.275518] Freeing unused kernel image (rodata/data gap) memory: 184K
[ 1.277046] rodata_test: all tests were successful
[ 1.278289] Run /init as init process
[ 1.296323] Alpine Init 3.9.1-r0
Alpine Init 3.9.1-r0
[ 1.298187] Loading boot drivers...
* Loading boot drivers: [ 1.344263] ACPI: bus type USB registered
[ 1.345079] usbcore: registered new interface driver usbfs
[ 1.346176] usbcore: registered new interface driver hub
[ 1.347321] usbcore: registered new device driver usb
[ 1.354512] usbcore: registered new interface driver usb-storage
[ 1.588400] loop: module loaded
[ 1.637149] ACPI: bus type drm_connector registered
[ 1.676137] Loading boot drivers: ok.
ok.
[ 1.679277] Mounting root...
* Mounting root: [ 1.723860] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.751607] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.752748] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.756577] [drm] Found EDID data blob.
[ 1.757808] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 1.770356] Console: switching to colour frame buffer device 160x50
[ 1.774090] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.935281] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.938219] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.031010] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 2.033615] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 2.041411] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 2.043977] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.215643] block sr0: the capability attribute has been deprecated.
[ 5.117008] EXT4-fs (vda): mounted filesystem 82b97a91-8270-4580-9e13-82ce10d47555 ro with ordered data mode. Quota mode: none.
[ 5.123973] Mounting root: ok.
ok.
OpenRC 0.52.1 is starting up Linux 6.6.14-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 6031/46000 files, 165032/184320 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
Cloud-init v. 23.4 running 'init-local' at Wed, 10 Apr 2024 11:32:05 +0000. Up 10.76 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ... [ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
Cloud-init v. 23.4 running 'init' at Wed, 10 Apr 2024 11:32:16 +0000. Up 22.70 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::5054:ff:fe12:3456/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
2024-04-10 11:32:17,204 - log.py[DEPRECATED]: Deprecated cloud-config provided:
chpasswd.list: List of ``username:password`` pairs. Each user will have the corresponding password set. A password can be randomly generated by specifying ``RANDOM`` or ``R`` as a user's password. A hashed password, created by a tool like ``mkpasswd``, can be specified. A regex (``r'\$(1|2a|2y|5|6)(\$.+){2}'``) is used to determine if a password value should be treated as a hash. Deprecated in version 22.2. Use ``users`` instead.
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:BZN3pVqsNI8ekD8jizTtWWpbzMvzsRyk+NP6BfXXTY4 root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| o. .. |
| .+.... |
| o.+.+ . .|
| . = B . =o|
| o S X + E *|
| . + @ * . .|
| . B *.o . |
| . =oo.= |
| . =*= |
+----[SHA256]-----+
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub
The key fingerprint is:
SHA256:G7vRRrggXvhJMkRKqoOY2zBZ2EOBWLbZUuz1jG3MBEE root@alpine-ci
The key's randomart image is:
+---[DSA 1024]----+
|.o*oo.Eo |
|oB B. . . |
|o O.o. O |
|++ +... B. |
|X = +.S . |
| * . B o B |
|. . . o = o |
| + |
| . |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:wXhD5ckM36SVLprOLR1xkK/ST4DeHSUaiBdhJu52KMM root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| ..B=..o. |
| ..Bo*+*o . |
| o.=.B*.o |
| . . o.o= = |
| E +.S= B . |
| + .= = o |
| o + + |
| + o . |
| . |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:6hSfkI43+bMl3p2rP3vH/FgdEDS/CP3w+CrpBjijd7c root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| .+ |
| . + |
| . + . |
| . . B .|
| + S o = |
| o X o . o|
| . O * o . +o|
| = =.= *..oo+|
| o =o*EO*..o|
+----[SHA256]-----+
[ ok ]
Cloud-init v. 23.4 running 'modules:config' at Wed, 10 Apr 2024 11:32:18 +0000. Up 24.66 seconds.
2024-04-10 11:32:19,103 - log.py[DEPRECATED]: Config key 'lists' is deprecated in 22.3 and scheduled to be removed in 27.3. Use 'users' instead.
2024-04-10 11:32:19,104 - log.py[DEPRECATED]: The chpasswd multiline string is deprecated in 22.2 and scheduled to be removed in 27.2. Use string type instead.
[ ok ]
Cloud-init v. 23.4 running 'modules:final' at Wed, 10 Apr 2024 11:32:20 +0000. Up 25.73 seconds.
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240226-r0)
Executing busybox-1.36.1-r15.trigger
Executing ca-certificates-20240226-r0.trigger
OK: 147 MiB in 152 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 1024 SHA256:G7vRRrggXvhJMkRKqoOY2zBZ2EOBWLbZUuz1jG3MBEE root@alpine-ci (DSA)
cloud-init: 256 SHA256:wXhD5ckM36SVLprOLR1xkK/ST4DeHSUaiBdhJu52KMM root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:6hSfkI43+bMl3p2rP3vH/FgdEDS/CP3w+CrpBjijd7c root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:BZN3pVqsNI8ekD8jizTtWWpbzMvzsRyk+NP6BfXXTY4 root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBFfnc0Td9cId7q9RvFM98c4vt30dN/wOhGa9n+b2nhADNcwi7oH5zboGBHaeJLhUgG5ATbhkS6UeQqxnt19dybo= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIF6TRh/WTCK8yWkkYHLqxPBNrfUPQywn9PlRAGizYefv root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 23.4 finished at Wed, 10 Apr 2024 11:32:22 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net]. Up 28.10 seconds
[ ok ]
Welcome to Alpine Linux 3.19
Kernel 6.6.14-0-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
.......
status: done
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.0-r5 -> 2.14.3-r1)
Executing busybox-1.36.1-r15.trigger
Continuing the upgrade transaction with new apk-tools:
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/community/x86_64/APKINDEX.tar.gz
(1/17) Upgrading ca-certificates-bundle (20230506-r0 -> 20240226-r0)
(2/17) Upgrading libcrypto3 (3.1.4-r5 -> 3.1.4-r6)
(3/17) Upgrading libssl3 (3.1.4-r5 -> 3.1.4-r6)
(4/17) Upgrading gnutls (3.8.3-r0 -> 3.8.4-r0)
(5/17) Upgrading libexpat (2.5.0-r2 -> 2.6.2-r0)
(6/17) Upgrading python3 (3.11.6-r1 -> 3.11.8-r0)
(7/17) Upgrading python3-pycache-pyc0 (3.11.6-r1 -> 3.11.8-r0)
(8/17) Upgrading pyc (3.11.6-r1 -> 3.11.8-r0)
(9/17) Installing py3-netifaces (0.11.0-r2)
(10/17) Upgrading py3-certifi (2023.7.22-r0 -> 2024.2.2-r0)
(11/17) Upgrading py3-certifi-pyc (2023.7.22-r0 -> 2024.2.2-r0)
(12/17) Upgrading tzdata (2023d-r0 -> 2024a-r0)
(13/17) Upgrading cloud-init-pyc (23.4-r0 -> 23.4.4-r1)
(14/17) Upgrading python3-pyc (3.11.6-r1 -> 3.11.8-r0)
(15/17) Upgrading cloud-init (23.4-r0 -> 23.4.4-r1)
(16/17) Upgrading cloud-init-openrc (23.4-r0 -> 23.4.4-r1)
(17/17) Upgrading linux-virt (6.6.14-r0 -> 6.6.25-r0)
Executing busybox-1.36.1-r15.trigger
Executing ca-certificates-20240226-r0.trigger
Executing kmod-31-r2.trigger
Executing mkinitfs-3.9.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.25-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 147 MiB in 153 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/8) Installing brotli-libs (1.1.0-r1)
(2/8) Installing c-ares (1.27.0-r0)
(3/8) Installing nghttp2-libs (1.58.0-r0)
(4/8) Installing libcurl (8.5.0-r0)
(5/8) Installing pcre2 (10.42-r2)
(6/8) Installing git (2.43.0-r0)
(7/8) Installing gnu-libiconv-libs (1.17-r2)
(8/8) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r15.trigger
OK: 157 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/pdf-simple-sign.git pdf-simple-sign
Cloning into 'pdf-simple-sign'...
remote: Enumerating objects: 257, done.
remote: Counting objects: 100% (96/96), done.
remote: Compressing objects: 100% (84/84), done.
remote: Total 257 (delta 43), reused 0 (delta 0), pack-reused 161 (from 1)
Receiving objects: 100% (257/257), 136.79 KiB | 4.14 MiB/s, done.
Resolving deltas: 100% (126/126), done.
+ cd pdf-simple-sign
+ git -c 'advice.detachedHead=false' checkout 147b8805247ca23fb96e51694f78439ab24f93a2
HEAD is now at 147b880 Fix test.sh for Alpine's current lowriter
+ doas apk add --no-interactive build-base meson asciidoctor openssl-dev
(1/27) Installing ruby-libs (3.2.2-r1)
(2/27) Installing libucontext (1.2-r2)
(3/27) Installing ruby (3.2.2-r1)
(4/27) Installing asciidoctor (2.0.20-r0)
(5/27) Installing jansson (2.14-r4)
(6/27) Installing binutils (2.41-r0)
(7/27) Installing libmagic (5.45-r1)
(8/27) Installing file (5.45-r1)
(9/27) Installing libgomp (13.2.1_git20231014-r0)
(10/27) Installing libatomic (13.2.1_git20231014-r0)
(11/27) Installing isl26 (0.26-r1)
(12/27) Installing mpfr4 (4.2.1-r0)
(13/27) Installing mpc1 (1.3.1-r1)
(14/27) Installing gcc (13.2.1_git20231014-r0)
(15/27) Installing libstdc++-dev (13.2.1_git20231014-r0)
(16/27) Installing musl-dev (1.2.4_git20230717-r4)
(17/27) Installing libc-dev (0.7.2-r5)
(18/27) Installing g++ (13.2.1_git20231014-r0)
(19/27) Installing make (4.4.1-r2)
(20/27) Installing fortify-headers (1.1-r3)
(21/27) Installing patch (2.7.6-r10)
(22/27) Installing build-base (0.5-r3)
(23/27) Installing samurai (1.2-r5)
(24/27) Installing meson (1.3.0-r0)
(25/27) Installing meson-pyc (1.3.0-r0)
(26/27) Installing pkgconf (2.1.0-r0)
(27/27) Installing openssl-dev (3.1.4-r6)
Executing busybox-1.36.1-r15.trigger
OK: 400 MiB in 188 packages
+ doas apk add --no-interactive go
(1/1) Installing go (1.21.9-r0)
Executing busybox-1.36.1-r15.trigger
OK: 576 MiB in 189 packages
+ doas apk add --no-interactive openssl nss-tools poppler-utils ncurses inkscape groff imagemagick imagemagick-pdf libreoffice-writer
(1/248) Installing perl (5.38.2-r0)
(2/248) Installing perl-error (0.17029-r2)
(3/248) Installing perl-git (2.43.0-r0)
(4/248) Installing git-perl (2.43.0-r0)
(5/248) Installing groff (1.23.0-r2)
(6/248) Installing libxau (1.0.11-r3)
(7/248) Installing libxdmcp (1.1.4-r3)
(8/248) Installing libxcb (1.16-r0)
(9/248) Installing libx11 (1.8.7-r0)
(10/248) Installing libxext (1.3.5-r3)
(11/248) Installing fftw-double-libs (3.3.10-r5)
(12/248) Installing libpng (1.6.40-r0)
(13/248) Installing freetype (2.13.2-r0)
(14/248) Installing fontconfig (2.14.2-r4)
(15/248) Installing lcms2 (2.15-r4)
(16/248) Installing libltdl (2.4.7-r3)
(17/248) Installing libxml2 (2.11.7-r0)
(18/248) Installing imagemagick-libs (7.1.1.26-r0)
(19/248) Installing imagemagick (7.1.1.26-r0)
(20/248) Installing dbus-libs (1.14.10-r0)
(21/248) Installing libintl (0.22.3-r0)
(22/248) Installing avahi-libs (0.8-r16)
(23/248) Installing cups-libs (2.4.7-r0)
(24/248) Installing jbig2dec (0.20-r0)
(25/248) Installing libjpeg-turbo (3.0.1-r0)
(26/248) Installing imagemagick-jpeg (7.1.1.26-r0)
(27/248) Installing libsharpyuv (1.3.2-r0)
(28/248) Installing libwebp (1.3.2-r0)
(29/248) Installing libwebpdemux (1.3.2-r0)
(30/248) Installing libwebpmux (1.3.2-r0)
(31/248) Installing imagemagick-webp (7.1.1.26-r0)
(32/248) Installing tiff (4.6.0-r0)
(33/248) Installing imagemagick-tiff (7.1.1.26-r0)
(34/248) Installing ghostscript (10.02.1-r0)
(35/248) Installing imagemagick-pdf (7.1.1.26-r0)
(36/248) Installing libxrender (0.9.11-r4)
(37/248) Installing pixman (0.42.2-r2)
(38/248) Installing cairo (1.18.0-r0)
(39/248) Installing glib (2.78.4-r0)
(40/248) Installing cairo-gobject (1.18.0-r0)
(41/248) Installing shared-mime-info (2.4-r0)
(42/248) Installing gdk-pixbuf (2.42.10-r6)
(43/248) Installing libxft (2.3.8-r2)
(44/248) Installing fribidi (1.0.13-r0)
(45/248) Installing graphite2 (1.3.14-r6)
(46/248) Installing harfbuzz (8.3.0-r0)
(47/248) Installing pango (1.51.0-r0)
(48/248) Installing imagemagick-pango (7.1.1.26-r0)
(49/248) Installing librsvg (2.57.1-r0)
(50/248) Installing imagemagick-svg (7.1.1.26-r0)
(51/248) Installing adwaita-icon-theme (45.0_git20230922-r0)
(52/248) Installing desktop-file-utils (0.27-r0)
(53/248) Installing py3-cssselect (1.2.0-r2)
(54/248) Installing py3-cssselect-pyc (1.2.0-r2)
(55/248) Installing libgpg-error (1.47-r2)
(56/248) Installing libgcrypt (1.10.3-r0)
(57/248) Installing libxslt (1.1.39-r0)
(58/248) Installing py3-lxml (4.9.3-r1)
(59/248) Installing py3-lxml-pyc (4.9.3-r1)
(60/248) Installing libquadmath (13.2.1_git20231014-r0)
(61/248) Installing libgfortran (13.2.1_git20231014-r0)
(62/248) Installing openblas (0.3.25-r0)
(63/248) Installing py3-numpy (1.25.2-r0)
(64/248) Installing py3-numpy-pyc (1.25.2-r0)
(65/248) Installing double-conversion (3.3.0-r0)
(66/248) Installing gsl (2.7.1-r1)
(67/248) Installing lib2geom (1.3-r2)
(68/248) Installing aom-libs (3.7.1-r0)
(69/248) Installing libde265 (1.0.15-r0)
(70/248) Installing numactl (2.0.16-r4)
(71/248) Installing x265-libs (3.5-r4)
(72/248) Installing libheif (1.17.6-r0)
(73/248) Installing imagemagick-heic (7.1.1.26-r0)
(74/248) Installing ghostscript-fonts (8.11-r5)
(75/248) Installing libwmf (0.2.13-r0)
(76/248) Installing graphicsmagick (1.3.42-r0)
(77/248) Installing graphicsmagick-c++ (1.3.42-r0)
(78/248) Installing libatk-1.0 (2.50.1-r0)
(79/248) Installing libsigc++ (2.12.1-r0)
(80/248) Installing glibmm (2.66.6-r0)
(81/248) Installing atkmm (2.28.3-r1)
(82/248) Installing boost1.82-filesystem (1.82.0-r3)
(83/248) Installing cairomm (1.14.5-r0)
(84/248) Installing icu-data-en (74.1-r0)
Executing icu-data-en-74.1-r0.post-install
*
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
*
(85/248) Installing icu-libs (74.1-r0)
(86/248) Installing librevenge (0.0.5-r1)
(87/248) Installing libcdr (0.1.7-r12)
(88/248) Installing libepoxy (1.5.10-r1)
(89/248) Installing gc (8.2.4-r1)
(90/248) Installing hicolor-icon-theme (0.17-r2)
(91/248) Installing gtk-update-icon-cache (3.24.41-r0)
(92/248) Installing libxcomposite (0.4.6-r4)
(93/248) Installing libxfixes (6.0.1-r3)
(94/248) Installing libxcursor (1.2.1-r3)
(95/248) Installing libxdamage (1.1.6-r4)
(96/248) Installing libxi (1.8.1-r2)
(97/248) Installing libxinerama (1.1.5-r3)
(98/248) Installing libxrandr (1.5.4-r0)
(99/248) Installing libxtst (1.2.4-r4)
(100/248) Installing at-spi2-core (2.50.1-r0)
(101/248) Installing libatk-bridge-2.0 (2.50.1-r0)
(102/248) Installing wayland-libs-client (1.22.0-r4)
(103/248) Installing wayland-libs-cursor (1.22.0-r4)
(104/248) Installing wayland-libs-egl (1.22.0-r4)
(105/248) Installing xkeyboard-config (2.40-r0)
(106/248) Installing libxkbcommon (1.6.0-r0)
(107/248) Installing gtk+3.0 (3.24.41-r0)
(108/248) Installing pangomm (2.46.4-r0)
(109/248) Installing gtkmm3 (3.24.8-r0)
(110/248) Installing iso-codes (4.15.0-r1)
(111/248) Installing enchant2-libs (2.6.3-r0)
(112/248) Installing gspell (1.12.2-r1)
(113/248) Installing nspr (4.35-r4)
(114/248) Installing nss (3.98-r0)
(115/248) Installing openjpeg (2.5.0-r3)
(116/248) Installing poppler (23.10.0-r0)
(117/248) Installing poppler-glib (23.10.0-r0)
(118/248) Installing potrace (1.16-r2)
(119/248) Installing gsettings-desktop-schemas (45.0-r0)
(120/248) Installing duktape (2.7.0-r1)
(121/248) Installing libproxy (0.5.3-r0)
(122/248) Installing glib-networking (2.78.1-r0)
(123/248) Installing libpsl (0.21.2-r1)
(124/248) Installing libsoup (2.74.3-r2)
(125/248) Installing libvisio (0.1.7-r10)
(126/248) Installing libinkscape_base (1.3-r2)
(127/248) Installing inkscape (1.3-r2)
(128/248) Installing libreoffice-lang-en_us (7.6.3.1-r0)
(129/248) Installing libice (1.1.1-r5)
(130/248) Installing libsm (1.2.4-r3)
(131/248) Installing zxing-cpp (2.1.0-r0)
(132/248) Installing boost1.82-thread (1.82.0-r3)
(133/248) Installing boost1.82-locale (1.82.0-r3)
(134/248) Installing box2d (2.4.1-r2)
(135/248) Installing clucene (2.3.3.4-r21)
(136/248) Installing clucene-contribs (2.3.3.4-r21)
(137/248) Installing libexttextcat (3.4.6-r0)
(138/248) Installing libfreehand (0.1.2-r11)
(139/248) Installing libassuan (2.5.6-r1)
(140/248) Installing pinentry (1.2.1-r1)
Executing pinentry-1.2.1-r1.post-install
(141/248) Installing gnupg-gpgconf (2.4.4-r0)
(142/248) Installing libksba (1.6.5-r0)
(143/248) Installing libsasl (2.1.28-r5)
(144/248) Installing libldap (2.6.6-r1)
(145/248) Installing npth (1.6-r4)
(146/248) Installing gnupg-dirmngr (2.4.4-r0)
(147/248) Installing gnupg-keyboxd (2.4.4-r0)
(148/248) Installing gpg (2.4.4-r0)
(149/248) Installing gpg-agent (2.4.4-r0)
(150/248) Installing gpgsm (2.4.4-r0)
(151/248) Installing gpgme (1.23.2-r0)
(152/248) Installing gpgmepp (1.23.2-r0)
(153/248) Installing mesa (23.3.6-r0)
(154/248) Installing hwdata-pci (0.377.2-r0)
(155/248) Installing libpciaccess (0.17-r2)
(156/248) Installing libdrm (2.4.118-r0)
(157/248) Installing wayland-libs-server (1.22.0-r4)
(158/248) Installing mesa-gbm (23.3.6-r0)
(159/248) Installing mesa-glapi (23.3.6-r0)
(160/248) Installing libxshmfence (1.3.2-r5)
(161/248) Installing mesa-egl (23.3.6-r0)
(162/248) Installing libxxf86vm (1.1.5-r5)
(163/248) Installing mesa-gl (23.3.6-r0)
(164/248) Installing libxv (1.0.12-r4)
(165/248) Installing alsa-lib (1.2.10-r0)
(166/248) Installing cdparanoia-libs (10.2-r14)
(167/248) Installing graphene (1.10.8-r4)
(168/248) Installing gstreamer (1.22.8-r0)
(169/248) Installing libogg (1.3.5-r5)
(170/248) Installing opus (1.4-r0)
(171/248) Installing orc (0.4.34-r0)
(172/248) Installing libtheora (1.1.1-r18)
(173/248) Installing libvorbis (1.3.7-r2)
(174/248) Installing gst-plugins-base (1.22.8-r0)
(175/248) Installing openexr-libiex (3.1.12-r0)
(176/248) Installing boost1.82-python3 (1.82.0-r3)
(177/248) Installing imath (3.1.9-r3)
(178/248) Installing openexr-libilmthread (3.1.12-r0)
(179/248) Installing openexr-libopenexr (3.1.12-r0)
(180/248) Installing soundtouch (2.3.2-r4)
(181/248) Installing libunibreak (5.1-r3)
(182/248) Installing libass (0.17.1-r1)
(183/248) Installing libraw1394 (2.1.2-r5)
(184/248) Installing libusb (1.0.26-r3)
(185/248) Installing libdc1394 (2.2.7-r0)
(186/248) Installing tslib (1.22-r1)
(187/248) Installing directfb (1.7.7-r7)
(188/248) Installing faac (1.30-r5)
(189/248) Installing fdk-aac (2.0.2-r4)
(190/248) Installing flite (2.2-r2)
(191/248) Installing libfreeaptx (0.1.1-r1)
(192/248) Installing gsm (1.0.22-r3)
(193/248) Installing eudev-libs (3.2.14-r0)
(194/248) Installing libgudev (238-r0)
(195/248) Installing libldac (2.0.2.3-r1)
(196/248) Installing libmodplug (0.8.9.0-r3)
(197/248) Installing neon (0.32.5-r2)
(198/248) Installing libnice (0.1.21-r0)
(199/248) Installing openal-soft-libs (1.23.1-r0)
(200/248) Installing librtmp (2.4_git20190330-r4)
(201/248) Installing sbc (2.0-r1)
(202/248) Installing libflac (1.4.3-r1)
(203/248) Installing libsndfile (1.2.2-r0)
(204/248) Installing spandsp (0.0.6-r5)
(205/248) Installing libsrtp (2.5.0-r1)
(206/248) Installing libva (2.20.0-r0)
(207/248) Installing vo-aacenc (0.1.3-r2)
(208/248) Installing vo-amrwbenc (0.1.3-r2)
(209/248) Installing libzbar (0.23.93-r0)
(210/248) Installing gst-plugins-bad (1.22.8-r0)
(211/248) Installing gtk4.0 (4.12.4-r0)
Executing gtk4.0-4.12.4-r0.post-install
(212/248) Installing harfbuzz-icu (8.3.0-r0)
(213/248) Installing libhunspell (1.7.2-r4)
(214/248) Installing hyphen (2.8.8-r3)
(215/248) Installing liblangtag (0.6.7-r0)
(216/248) Installing mariadb-connector-c (3.3.8-r0)
(217/248) Installing libmspub (0.1.4-r20)
(218/248) Installing libmwaw (0.3.22-r0)
(219/248) Installing mythes (1.2.4-r3)
(220/248) Installing libnumbertext (1.0.11-r1)
(221/248) Installing libodfgen (0.1.8-r7)
(222/248) Installing boost1.82-iostreams (1.82.0-r3)
(223/248) Installing boost1.82-program_options (1.82.0-r3)
(224/248) Installing libixion (0.19.0-r0)
(225/248) Installing liborcus (0.19.1-r0)
(226/248) Installing libpagemaker (0.0.4-r8)
(227/248) Installing libqxp (0.0.2-r10)
(228/248) Installing yajl (2.1.0-r8)
(229/248) Installing raptor2 (2.0.16-r1)
(230/248) Installing rasqal (0.9.33-r3)
(231/248) Installing redland (1.0.17-r2)
(232/248) Installing libstaroffice (0.0.7-r7)
(233/248) Installing libwpd (0.10.3-r1)
(234/248) Installing libwpg (0.3.4-r0)
(235/248) Installing xmlsec (1.3.2-r0)
(236/248) Installing xmlsec-nss (1.3.2-r0)
(237/248) Installing libzmf (0.0.2-r18)
(238/248) Installing libreoffice-common (7.6.3.1-r0)
(239/248) Installing libabw (0.1.3-r3)
(240/248) Installing libe-book (0.1.3-r23)
(241/248) Installing libepubgen (0.1.1-r2)
(242/248) Installing libetonyek (0.1.10-r9)
(243/248) Installing libwps (0.4.14-r0)
(244/248) Installing libreoffice-writer (7.6.3.1-r0)
(245/248) Installing ncurses (6.4_p20231125-r0)
(246/248) Installing nss-tools (3.98-r0)
(247/248) Installing openssl (3.1.4-r6)
(248/248) Installing poppler-utils (23.10.0-r0)
Executing busybox-1.36.1-r15.trigger
Executing fontconfig-2.14.2-r4.trigger
Executing glib-2.78.4-r0.trigger
Executing shared-mime-info-2.4-r0.trigger
Executing gdk-pixbuf-2.42.10-r6.trigger
Executing desktop-file-utils-0.27-r0.trigger
Executing gtk-update-icon-cache-3.24.41-r0.trigger
Executing gtk+3.0-3.24.41-r0.trigger
OK: 1421 MiB in 437 packages
+ meson setup build
The Meson build system
Version: 1.3.0
Source dir: /home/ci/pdf-simple-sign
Build dir: /home/ci/pdf-simple-sign/build
Build type: native build
Project name: pdf-simple-sign
Project version: 1.1.1
C++ compiler for the host machine: c++ (gcc 13.2.1 "c++ (Alpine 13.2.1_git20231014) 13.2.1 20231014")
C++ linker for the host machine: c++ ld.bfd 2.41
Host machine cpu family: x86_64
Host machine cpu: x86_64
Configuring config.h using configuration
Found pkg-config: YES (/usr/bin/pkg-config) 2.1.0
Run-time dependency libcrypto found: YES 3.1.4
Program asciidoctor found: YES (/usr/bin/asciidoctor)
Build targets in project: 2
Found ninja-1.9 at /usr/bin/ninja
+ meson compile -C build
INFO: autodetecting backend as ninja
INFO: calculating backend command to run: /usr/bin/ninja -C /home/ci/pdf-simple-sign/build
ninja: entering directory '/home/ci/pdf-simple-sign/build'
[1/3] Generating manpage for pdf-simple-sign with a custom command
[2/3] Compiling C++ object pdf-simple-sign.p/pdf-simple-sign.cpp.o
[01m[K../pdf-simple-sign.cpp:[m[K In function '[01m[Kstd::string[01;32m[K pdf_serialize[m[K(const pdf_object&)[m[K':
[01m[K../pdf-simple-sign.cpp:301:21:[m[K [01;35m[Kwarning: [m[Kloop variable '[01m[Ki[m[K' creates a copy from type '[01m[Kconst std::pair<const std::__cxx11::basic_string<char>, pdf_object>[m[K' [[01;35m[K-Wrange-loop-construct[m[K]
301 | for (const auto [01;35m[Ki[m[K : o.dict)
| [01;35m[K^[m[K
[01m[K../pdf-simple-sign.cpp:301:21:[m[K [01;36m[Knote: [m[Kuse reference type to prevent copying
301 | for (const auto [01;36m[Ki[m[K : o.dict)
| [01;36m[K^[m[K
| [32m[K&[m[K
[3/3] Linking target pdf-simple-sign
+ meson test -C build
ninja: nothing to do
No tests defined.
+ go install ./...
go: downloading go.mozilla.org/pkcs7 v0.0.0-20210826202110-33d05740a352
go: downloading golang.org/x/crypto v0.10.0
+ ./test.sh build/pdf-simple-sign /home/ci/go/bin/pdf-simple-sign
-- Creating source documents
javaldx: Could not find a Java Runtime Environment!
Warning: failed to read path from javaldx
-- Creating certificates
-- Testing build/pdf-simple-sign with tmp/cairo.pdf
- Signature Validation: Signature is Valid.
- Certificate Validation: Certificate is Trusted.
-- Testing build/pdf-simple-sign for version detection
-- Testing build/pdf-simple-sign with tmp/groff.pdf
- Signature Validation: Signature is Valid.
- Certificate Validation: Certificate is Trusted.
-- Testing build/pdf-simple-sign for version detection
-- Testing build/pdf-simple-sign with tmp/imagemagick.pdf
- Signature Validation: Signature is Valid.
- Certificate Validation: Certificate is Trusted.
-- Testing build/pdf-simple-sign for version detection
-- Testing build/pdf-simple-sign with tmp/lowriter.pdf
- Signature Validation: Signature is Valid.
- Certificate Validation: Certificate is Trusted.
-- Testing build/pdf-simple-sign for version detection
-- Testing build/pdf-simple-sign for expected failures
[31mError: the document already contains forms, they would be overwritten[0m
[31mError: not enough space reserved for the signature (2 nibbles vs 2604 nibbles)[0m
-- Testing /home/ci/go/bin/pdf-simple-sign with tmp/cairo.pdf
- Signature Validation: Signature is Valid.
- Certificate Validation: Certificate is Trusted.
-- Testing /home/ci/go/bin/pdf-simple-sign for version detection
-- Testing /home/ci/go/bin/pdf-simple-sign with tmp/groff.pdf
- Signature Validation: Signature is Valid.
- Certificate Validation: Certificate is Trusted.
-- Testing /home/ci/go/bin/pdf-simple-sign for version detection
-- Testing /home/ci/go/bin/pdf-simple-sign with tmp/imagemagick.pdf
- Signature Validation: Signature is Valid.
- Certificate Validation: Certificate is Trusted.
-- Testing /home/ci/go/bin/pdf-simple-sign for version detection
-- Testing /home/ci/go/bin/pdf-simple-sign with tmp/lowriter.pdf
- Signature Validation: Signature is Valid.
- Certificate Validation: Certificate is Trusted.
-- Testing /home/ci/go/bin/pdf-simple-sign for version detection
-- Testing /home/ci/go/bin/pdf-simple-sign for expected failures
[0;31merror: the document already contains forms, they would be overwritten
[m[0;31merror: not enough space reserved for the signature (2 nibbles vs 2592 nibbles)
[m-- OK