- Project
- p/sensei-raw-ctl
- Commit
- e8914c63fbc82832577d9d57f0e87d5fc4de29f9
- Runner
- Alpine 3.20
- State
- Success
- Notified
- 1
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7l[2J[0mSeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
[2Je%@)0(B[0;37;40m[?25l[2J[23;16HAlpine will be booted automatically in [0;1m1[0m seconds[23;16H[0;37;40mAlpine will be booted automatically in [0;1;37;40m1[0;37;40m seconds..[23;16H [23;16H[0;37;40m [?25h[24;1H[0m
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
c[?7l[2J[ 0.000000] Linux version 6.6.14-0-virt (buildozer@build-3-19-x86_64) (gcc (Alpine 13.2.1_git20231014) 13.2.1 20231014, GNU ld (GNU Binutils) 2.41) #1-Alpine SMP PREEMPT_DYNAMIC Fri, 26 Jan 2024 11:08:07 +0000
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1544091665 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000008] tsc: Detected 1696.074 MHz processor
[ 0.001075] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001111] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001115] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001459] RAMDISK: [mem 0x7f6f7000-0x7ffd9fff]
[ 0.001463] ACPI: Early table checksum verification disabled
[ 0.001468] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[ 0.001475] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001485] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001494] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001500] ACPI: FACS 0x000000007FFE0000 000040
[ 0.001506] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001512] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001518] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001522] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[ 0.001524] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[ 0.001526] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.001527] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[ 0.001528] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[ 0.001529] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[ 0.002018] Zone ranges:
[ 0.002020] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.002024] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.002026] Normal empty
[ 0.002027] Movable zone start for each node
[ 0.002028] Early memory node ranges
[ 0.002029] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.002032] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.002034] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.002420] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002449] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.012248] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.012943] ACPI: PM-Timer IO Port: 0x608
[ 0.012963] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.013024] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.013030] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013033] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.013035] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013037] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.013038] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.013046] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013048] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013056] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.013080] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.013103] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.013105] Booting paravirtualized kernel on KVM
[ 0.013107] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.019847] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.020463] percpu: Embedded 57 pages/cpu s195048 r8192 d30232 u1048576
[ 0.020511] kvm-guest: PV spinlocks disabled, no host support
[ 0.020513] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.020597] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.021176] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.021659] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.021758] Built 1 zonelists, mobility grouping on. Total pages: 515802
[ 0.022401] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.028977] Memory: 2017148K/2096608K available (12288K kernel code, 1744K rwdata, 8008K rodata, 2636K init, 2300K bss, 79200K reserved, 0K cma-reserved)
[ 0.039908] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.040057] Kernel/User page tables isolation: enabled
[ 0.041254] Dynamic Preempt: none
[ 0.041396] rcu: Preemptible hierarchical RCU implementation.
[ 0.041397] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.041399] Trampoline variant of Tasks RCU enabled.
[ 0.041400] Tracing variant of Tasks RCU enabled.
[ 0.041401] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.041402] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.046384] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.046625] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.046820] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.054669] Console: colour VGA+ 80x25
[ 0.054730] printk: console [ttyS0] enabled
[ 0.233421] ACPI: Core revision 20230628
[ 0.235291] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.238569] APIC: Switch to symmetric I/O mode setup
[ 0.240620] x2apic enabled
[ 0.242025] APIC: Switched APIC routing to: physical x2apic
[ 0.245610] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.247610] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.251094] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960740)
[ 0.253881] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.255588] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.257493] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.261098] Spectre V2 : Mitigation: Retpolines
[ 0.262559] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.265218] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.267369] Speculative Store Bypass: Vulnerable
[ 0.268865] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.271094] MMIO Stale Data: Unknown: No mitigations
[ 0.272693] x86/fpu: x87 FPU will use FXSAVE
[ 0.297957] Freeing SMP alternatives memory: 32K
[ 0.299522] pid_max: default: 32768 minimum: 301
[ 0.302017] LSM: initializing lsm=capability,landlock,lockdown,integrity
[ 0.305768] landlock: Up and running.
[ 0.307225] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.309629] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.433325] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.436796] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.439163] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.441087] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.441139] signal: max sigframe size: 1440
[ 0.442605] rcu: Hierarchical SRCU implementation.
[ 0.444164] rcu: Max phase no-delay instances is 1000.
[ 0.446288] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.448344] smp: Bringing up secondary CPUs ...
[ 0.451315] smpboot: x86: Booting SMP configuration:
[ 0.452954] .... node #0, CPUs: #1
[ 0.464325] smp: Brought up 1 node, 2 CPUs
[ 0.464325] smpboot: Max logical packages: 1
[ 0.465415] ----------------
[ 0.471100] | NMI testsuite:
[ 0.472099] --------------------
[ 0.473212] remote IPI: ok |
[ 0.473265] local IPI: ok |
[ 0.473352] --------------------
[ 0.474483] Good, all 2 testcases passed! |
[ 0.475980] ---------------------------------
[ 0.477492] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.481610] devtmpfs: initialized
[ 0.482352] x86/mm: Memory block size: 128MB
[ 0.484300] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.484591] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.493015] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.495285] audit: initializing netlink subsys (disabled)
[ 0.497239] audit: type=2000 audit(1712749082.464:1): state=initialized audit_enabled=0 res=1
[ 0.497239] thermal_sys: Registered thermal governor 'step_wise'
[ 0.501127] cpuidle: using governor ladder
[ 0.503742] cpuidle: using governor menu
[ 0.504922] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.507055] PCI: Using configuration type 1 for base access
[ 0.508740] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.518448] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.518448] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.521437] ACPI: Added _OSI(Module Device)
[ 0.522294] ACPI: Added _OSI(Processor Device)
[ 0.523421] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.524661] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.526905] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.532267] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.532865] ACPI: Interpreter enabled
[ 0.533820] ACPI: PM: (supports S0 S3 S5)
[ 0.534842] ACPI: Using IOAPIC for interrupt routing
[ 0.536170] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.538494] PCI: Using E820 reservations for host bridge windows
[ 0.541257] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.546016] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.547663] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.549642] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.551106] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.554467] acpiphp: Slot [3] registered
[ 0.555545] acpiphp: Slot [4] registered
[ 0.556584] acpiphp: Slot [5] registered
[ 0.557631] acpiphp: Slot [6] registered
[ 0.558673] acpiphp: Slot [7] registered
[ 0.559700] acpiphp: Slot [8] registered
[ 0.561136] acpiphp: Slot [9] registered
[ 0.562217] acpiphp: Slot [10] registered
[ 0.563268] acpiphp: Slot [11] registered
[ 0.564310] acpiphp: Slot [12] registered
[ 0.565395] acpiphp: Slot [13] registered
[ 0.566494] acpiphp: Slot [14] registered
[ 0.567551] acpiphp: Slot [15] registered
[ 0.568597] acpiphp: Slot [16] registered
[ 0.569676] acpiphp: Slot [17] registered
[ 0.571126] acpiphp: Slot [18] registered
[ 0.572192] acpiphp: Slot [19] registered
[ 0.573263] acpiphp: Slot [20] registered
[ 0.574322] acpiphp: Slot [21] registered
[ 0.575368] acpiphp: Slot [22] registered
[ 0.576462] acpiphp: Slot [23] registered
[ 0.577519] acpiphp: Slot [24] registered
[ 0.578570] acpiphp: Slot [25] registered
[ 0.579648] acpiphp: Slot [26] registered
[ 0.581144] acpiphp: Slot [27] registered
[ 0.582382] acpiphp: Slot [28] registered
[ 0.583673] acpiphp: Slot [29] registered
[ 0.585000] acpiphp: Slot [30] registered
[ 0.586669] acpiphp: Slot [31] registered
[ 0.588101] PCI host bridge to bus 0000:00
[ 0.589814] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.591103] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.593717] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.595771] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.597449] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.601100] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.602800] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.605255] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.607982] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.614450] pci 0000:00:01.1: reg 0x20: [io 0xc120-0xc12f]
[ 0.617919] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.620052] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.621097] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.623178] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.625433] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.628143] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.631124] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.633794] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.643494] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.650155] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 0.658858] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.661379] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.664764] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.668132] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc11f]
[ 0.672393] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 0.679465] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.682370] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.686245] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.693544] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.697163] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 0.704230] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.711096] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.717569] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0ff]
[ 0.720466] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[ 0.726627] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.734769] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.736668] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.738781] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.741271] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.743343] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.745833] iommu: Default domain type: Translated
[ 0.747420] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.749708] SCSI subsystem initialized
[ 0.751312] pps_core: LinuxPPS API ver. 1 registered
[ 0.752917] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.755932] PTP clock support registered
[ 0.757281] PCI: Using ACPI for IRQ routing
[ 0.757281] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.761179] clocksource: Switched to clocksource kvm-clock
[ 0.769917] VFS: Disk quotas dquot_6.6.0
[ 0.771313] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.773675] pnp: PnP ACPI init
[ 0.775250] pnp: PnP ACPI: found 6 devices
[ 0.785659] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.788743] NET: Registered PF_INET protocol family
[ 0.789980] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.793000] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.795026] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.796826] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.798766] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.800596] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.802554] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.804128] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.806017] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.807343] NET: Registered PF_XDP protocol family
[ 0.808543] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.810122] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.811753] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.813488] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.815265] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.817109] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.818588] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.820200] PCI: CLS 0 bytes, default 64
[ 0.821289] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.821446] Unpacking initramfs...
[ 0.823771] Initialise system trusted keyrings
[ 0.826355] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.828258] zbud: loaded
[ 0.829249] Key type asymmetric registered
[ 0.830341] Asymmetric key parser 'x509' registered
[ 0.831617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.833598] io scheduler mq-deadline registered
[ 0.834620] io scheduler kyber registered
[ 0.835884] io scheduler bfq registered
[ 0.845009] ERST DBG: ERST support is disabled.
[ 0.871026] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.898474] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.952537] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.959069] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.962769] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.968712] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.972659] scsi host0: ata_piix
[ 0.975927] scsi host1: ata_piix
[ 0.978338] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 0.980375] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 0.983908] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.989974] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.991553] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.993321] rtc_cmos 00:05: RTC can wake from S4
[ 0.995940] rtc_cmos 00:05: registered as rtc0
[ 0.997642] rtc_cmos 00:05: setting system clock to 2024-04-10T11:38:02 UTC (1712749082)
[ 1.000519] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.003097] intel_pstate: CPU model not supported
[ 1.004905] gre: GRE over IPv4 demultiplexor driver
[ 1.020855] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.026525] Key type dns_resolver registered
[ 1.028156] IPI shorthand broadcast: enabled
[ 1.030907] Freeing initrd memory: 9100K
[ 1.032854] sched_clock: Marking stable (840010739, 184452879)->(1025847373, -1383755)
[ 1.045182] registered taskstats version 1
[ 1.046718] Loading compiled-in X.509 certificates
[ 1.054990] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 1.060406] Key type .fscrypt registered
[ 1.061771] Key type fscrypt-provisioning registered
[ 1.145100] ata2: found unknown device (class 0)
[ 1.147034] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.150183] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.186254] Freeing unused kernel image (initmem) memory: 2636K
[ 1.224624] Write protecting the kernel read-only data: 20480k
[ 1.225892] Freeing unused kernel image (rodata/data gap) memory: 184K
[ 1.227031] rodata_test: all tests were successful
[ 1.227897] Run /init as init process
[ 1.243222] Alpine Init 3.9.1-r0
Alpine Init 3.9.1-r0
[ 1.244395] Loading boot drivers...
* Loading boot drivers: [ 1.289337] ACPI: bus type USB registered
[ 1.290453] usbcore: registered new interface driver usbfs
[ 1.291903] usbcore: registered new interface driver hub
[ 1.293293] usbcore: registered new device driver usb
[ 1.300582] usbcore: registered new interface driver usb-storage
[ 1.499601] loop: module loaded
[ 1.548351] ACPI: bus type drm_connector registered
[ 1.587100] Loading boot drivers: ok.
ok.
[ 1.590234] Mounting root...
* Mounting root: [ 1.611148] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.639657] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.640540] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.643968] [drm] Found EDID data blob.
[ 1.645519] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 1.659492] Console: switching to colour frame buffer device 160x50
[ 1.662704] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.775734] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.777850] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.871314] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 1.878030] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.883181] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 1.886499] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.061331] block sr0: the capability attribute has been deprecated.
[ 4.987904] EXT4-fs (vda): mounted filesystem 82b97a91-8270-4580-9e13-82ce10d47555 ro with ordered data mode. Quota mode: none.
[ 4.993459] Mounting root: ok.
ok.
OpenRC 0.52.1 is starting up Linux 6.6.14-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 6031/46000 files, 165032/184320 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
Cloud-init v. 23.4 running 'init-local' at Wed, 10 Apr 2024 11:38:12 +0000. Up 10.59 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ... [ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
Cloud-init v. 23.4 running 'init' at Wed, 10 Apr 2024 11:38:23 +0000. Up 22.53 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::5054:ff:fe12:3456/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
2024-04-10 11:38:24,206 - log.py[DEPRECATED]: Deprecated cloud-config provided:
chpasswd.list: List of ``username:password`` pairs. Each user will have the corresponding password set. A password can be randomly generated by specifying ``RANDOM`` or ``R`` as a user's password. A hashed password, created by a tool like ``mkpasswd``, can be specified. A regex (``r'\$(1|2a|2y|5|6)(\$.+){2}'``) is used to determine if a password value should be treated as a hash. Deprecated in version 22.2. Use ``users`` instead.
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:w1o8cnG7l6M+nuWfWDy4elgS4KFetRgfcwuVhDSx3J0 root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| .+=o. |
| +.*+o. . |
| o.B+*..E |
| .o+o+.. |
| ...S .. |
| .= o...+ |
| . .+* + |
| o*.= o |
| o*++.o |
+----[SHA256]-----+
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub
The key fingerprint is:
SHA256:Aha1bAl7KGaxaqcgwx+mynKJNY5uLTnjbAj4IkoemrQ root@alpine-ci
The key's randomart image is:
+---[DSA 1024]----+
| . o.. |
| o * o |
| = = * |
|.+ o + |
|*o + . S |
|*.O . . |
|o%o+ |
|/OB. |
|&E+ |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:NwebSchGS7BA1jMtu7vgh5ThW9eu5VNr/7nUyGynXF4 root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| .+..oo |
| . .==.o |
| .== o |
| . .. . = |
| . o .S.* . |
| + o ...o.o ..|
| ..+ o ... .=.E|
| .o.o oo oo.=o|
| .......o .+++|
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:YT53W/FZ3222kVV2RCopHlrutY+QPF8qnUVFnrfzAAk root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| E +B|
| . o +=|
| o + = oo=|
| o * o o.o@|
| S + o.o*B|
| = + +.+=|
| *.oo...|
| .+o= |
| .+ . |
+----[SHA256]-----+
[ ok ]
Cloud-init v. 23.4 running 'modules:config' at Wed, 10 Apr 2024 11:38:25 +0000. Up 24.30 seconds.
2024-04-10 11:38:25,889 - log.py[DEPRECATED]: Config key 'lists' is deprecated in 22.3 and scheduled to be removed in 27.3. Use 'users' instead.
2024-04-10 11:38:25,893 - log.py[DEPRECATED]: The chpasswd multiline string is deprecated in 22.2 and scheduled to be removed in 27.2. Use string type instead.
[ ok ]
Cloud-init v. 23.4 running 'modules:final' at Wed, 10 Apr 2024 11:38:26 +0000. Up 25.38 seconds.
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240226-r0)
Executing busybox-1.36.1-r15.trigger
Executing ca-certificates-20240226-r0.trigger
OK: 147 MiB in 152 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 1024 SHA256:Aha1bAl7KGaxaqcgwx+mynKJNY5uLTnjbAj4IkoemrQ root@alpine-ci (DSA)
cloud-init: 256 SHA256:NwebSchGS7BA1jMtu7vgh5ThW9eu5VNr/7nUyGynXF4 root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:YT53W/FZ3222kVV2RCopHlrutY+QPF8qnUVFnrfzAAk root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:w1o8cnG7l6M+nuWfWDy4elgS4KFetRgfcwuVhDSx3J0 root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBEbaA+s00ugQx8A1nGhoD9LuuDqS+6CdxnssB7W78S/HFnpS48SY6zEWEsF0Itj56lOHEk2xkt9Mk4l+Fb8l8yg= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIN/eIrPZEuo839w9LB4HhgPVrWDEXPmyPSufdHr1glTP root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 23.4 finished at Wed, 10 Apr 2024 11:38:29 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net]. Up 27.67 seconds
[ ok ]
Welcome to Alpine Linux 3.19
Kernel 6.6.14-0-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
..........
status: done
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.0-r5 -> 2.14.3-r1)
Executing busybox-1.36.1-r15.trigger
Continuing the upgrade transaction with new apk-tools:
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/community/x86_64/APKINDEX.tar.gz
(1/17) Upgrading ca-certificates-bundle (20230506-r0 -> 20240226-r0)
(2/17) Upgrading libcrypto3 (3.1.4-r5 -> 3.1.4-r6)
(3/17) Upgrading libssl3 (3.1.4-r5 -> 3.1.4-r6)
(4/17) Upgrading gnutls (3.8.3-r0 -> 3.8.4-r0)
(5/17) Upgrading libexpat (2.5.0-r2 -> 2.6.2-r0)
(6/17) Upgrading python3 (3.11.6-r1 -> 3.11.8-r0)
(7/17) Upgrading python3-pycache-pyc0 (3.11.6-r1 -> 3.11.8-r0)
(8/17) Upgrading pyc (3.11.6-r1 -> 3.11.8-r0)
(9/17) Installing py3-netifaces (0.11.0-r2)
(10/17) Upgrading py3-certifi (2023.7.22-r0 -> 2024.2.2-r0)
(11/17) Upgrading py3-certifi-pyc (2023.7.22-r0 -> 2024.2.2-r0)
(12/17) Upgrading tzdata (2023d-r0 -> 2024a-r0)
(13/17) Upgrading cloud-init-pyc (23.4-r0 -> 23.4.4-r1)
(14/17) Upgrading python3-pyc (3.11.6-r1 -> 3.11.8-r0)
(15/17) Upgrading cloud-init (23.4-r0 -> 23.4.4-r1)
(16/17) Upgrading cloud-init-openrc (23.4-r0 -> 23.4.4-r1)
(17/17) Upgrading linux-virt (6.6.14-r0 -> 6.6.25-r0)
Executing busybox-1.36.1-r15.trigger
Executing ca-certificates-20240226-r0.trigger
Executing kmod-31-r2.trigger
Executing mkinitfs-3.9.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.25-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 147 MiB in 153 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/8) Installing brotli-libs (1.1.0-r1)
(2/8) Installing c-ares (1.27.0-r0)
(3/8) Installing nghttp2-libs (1.58.0-r0)
(4/8) Installing libcurl (8.5.0-r0)
(5/8) Installing pcre2 (10.42-r2)
(6/8) Installing git (2.43.0-r0)
(7/8) Installing gnu-libiconv-libs (1.17-r2)
(8/8) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r15.trigger
OK: 157 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/sensei-raw-ctl.git sensei-raw-ctl
Cloning into 'sensei-raw-ctl'...
remote: Enumerating objects: 186, done.
remote: Counting objects: 100% (6/6), done.
remote: Compressing objects: 100% (6/6), done.
remote: Total 186 (delta 1), reused 0 (delta 0), pack-reused 180 (from 1)
Receiving objects: 100% (186/186), 76.64 KiB | 4.03 MiB/s, done.
Resolving deltas: 100% (114/114), done.
+ cd sensei-raw-ctl
+ git -c 'advice.detachedHead=false' checkout e8914c63fbc82832577d9d57f0e87d5fc4de29f9
HEAD is now at e8914c6 CMakeLists.txt: declare compatibility with 3.27
+ doas apk add --no-interactive build-base cmake help2man libusb-dev gtk+3.0-dev
(1/199) Installing jansson (2.14-r4)
(2/199) Installing binutils (2.41-r0)
(3/199) Installing libmagic (5.45-r1)
(4/199) Installing file (5.45-r1)
(5/199) Installing libgomp (13.2.1_git20231014-r0)
(6/199) Installing libatomic (13.2.1_git20231014-r0)
(7/199) Installing isl26 (0.26-r1)
(8/199) Installing mpfr4 (4.2.1-r0)
(9/199) Installing mpc1 (1.3.1-r1)
(10/199) Installing gcc (13.2.1_git20231014-r0)
(11/199) Installing libstdc++-dev (13.2.1_git20231014-r0)
(12/199) Installing musl-dev (1.2.4_git20230717-r4)
(13/199) Installing libc-dev (0.7.2-r5)
(14/199) Installing g++ (13.2.1_git20231014-r0)
(15/199) Installing make (4.4.1-r2)
(16/199) Installing fortify-headers (1.1-r3)
(17/199) Installing patch (2.7.6-r10)
(18/199) Installing build-base (0.5-r3)
(19/199) Installing lz4-libs (1.9.4-r5)
(20/199) Installing libarchive (3.7.2-r1)
(21/199) Installing rhash-libs (1.4.4-r0)
(22/199) Installing libuv (1.47.0-r0)
(23/199) Installing cmake (3.27.8-r0)
(24/199) Installing pkgconf (2.1.0-r0)
(25/199) Installing libintl (0.22.3-r0)
(26/199) Installing glib (2.78.4-r0)
(27/199) Installing libxml2 (2.11.7-r0)
(28/199) Installing shared-mime-info (2.4-r0)
(29/199) Installing libjpeg-turbo (3.0.1-r0)
(30/199) Installing libpng (1.6.40-r0)
(31/199) Installing libsharpyuv (1.3.2-r0)
(32/199) Installing libwebp (1.3.2-r0)
(33/199) Installing tiff (4.6.0-r0)
(34/199) Installing gdk-pixbuf (2.42.10-r6)
(35/199) Installing bzip2-dev (1.0.8-r6)
(36/199) Installing libxml2-utils (2.11.7-r0)
(37/199) Installing docbook-xml (4.5-r8)
Executing docbook-xml-4.5-r8.post-install
(38/199) Installing libgpg-error (1.47-r2)
(39/199) Installing libgcrypt (1.10.3-r0)
(40/199) Installing libxslt (1.1.39-r0)
(41/199) Installing docbook-xsl (1.79.2-r8)
Executing docbook-xsl-1.79.2-r8.post-install
(42/199) Installing xz (5.4.5-r0)
(43/199) Installing gettext-asprintf (0.22.3-r0)
(44/199) Installing gettext-libs (0.22.3-r0)
(45/199) Installing gettext-envsubst (0.22.3-r0)
(46/199) Installing gettext (0.22.3-r0)
(47/199) Installing gettext-dev (0.22.3-r0)
(48/199) Installing linux-headers (6.5-r0)
(49/199) Installing libffi-dev (3.4.4-r3)
(50/199) Installing bsd-compat-headers (0.7.2-r5)
(51/199) Installing libformw (6.4_p20231125-r0)
(52/199) Installing libmenuw (6.4_p20231125-r0)
(53/199) Installing libncurses++ (6.4_p20231125-r0)
(54/199) Installing ncurses-dev (6.4_p20231125-r0)
(55/199) Installing libedit-dev (20230828.3.1-r3)
(56/199) Installing zlib-dev (1.3.1-r0)
(57/199) Installing libpcre2-16 (10.42-r2)
(58/199) Installing libpcre2-32 (10.42-r2)
(59/199) Installing pcre2-dev (10.42-r2)
(60/199) Installing util-linux-dev (2.39.3-r0)
(61/199) Installing glib-dev (2.78.4-r0)
(62/199) Installing libturbojpeg (3.0.1-r0)
(63/199) Installing libjpeg-turbo-dev (3.0.1-r0)
(64/199) Installing libpng-dev (1.6.40-r0)
(65/199) Installing zstd (1.5.5-r8)
(66/199) Installing zstd-dev (1.5.5-r8)
(67/199) Installing libtiffxx (4.6.0-r0)
(68/199) Installing libwebpdecoder (1.3.2-r0)
(69/199) Installing libwebpdemux (1.3.2-r0)
(70/199) Installing libwebpmux (1.3.2-r0)
(71/199) Installing libwebp-dev (1.3.2-r0)
(72/199) Installing tiff-dev (4.6.0-r0)
(73/199) Installing gdk-pixbuf-dev (2.42.10-r6)
(74/199) Installing libxau (1.0.11-r3)
(75/199) Installing xorgproto (2023.2-r0)
(76/199) Installing libxau-dev (1.0.11-r3)
(77/199) Installing xcb-proto (1.16.0-r0)
(78/199) Installing xcb-proto-pyc (1.16.0-r0)
(79/199) Installing libxdmcp (1.1.4-r3)
(80/199) Installing libxcb (1.16-r0)
(81/199) Installing libxdmcp-dev (1.1.4-r3)
(82/199) Installing libxcb-dev (1.16-r0)
(83/199) Installing xtrans (1.5.0-r0)
(84/199) Installing libx11 (1.8.7-r0)
(85/199) Installing libx11-dev (1.8.7-r0)
(86/199) Installing libepoxy (1.5.10-r1)
(87/199) Installing hwdata-pci (0.377.2-r0)
(88/199) Installing libpciaccess (0.17-r2)
(89/199) Installing libdrm (2.4.118-r0)
(90/199) Installing libpciaccess-dev (0.17-r2)
(91/199) Installing libdrm-dev (2.4.118-r0)
(92/199) Installing libxext (1.3.5-r3)
(93/199) Installing libxext-dev (1.3.5-r3)
(94/199) Installing libxdamage (1.1.6-r4)
(95/199) Installing libxfixes (6.0.1-r3)
(96/199) Installing libxfixes-dev (6.0.1-r3)
(97/199) Installing libxdamage-dev (1.1.6-r4)
(98/199) Installing libxshmfence (1.3.2-r5)
(99/199) Installing libxshmfence-dev (1.3.2-r5)
(100/199) Installing mesa (23.3.6-r0)
(101/199) Installing wayland-libs-server (1.22.0-r4)
(102/199) Installing mesa-gbm (23.3.6-r0)
(103/199) Installing mesa-glapi (23.3.6-r0)
(104/199) Installing wayland-libs-client (1.22.0-r4)
(105/199) Installing mesa-egl (23.3.6-r0)
(106/199) Installing libxxf86vm (1.1.5-r5)
(107/199) Installing mesa-gl (23.3.6-r0)
(108/199) Installing mesa-gles (23.3.6-r0)
(109/199) Installing llvm17-libs (17.0.5-r0)
(110/199) Installing mesa-osmesa (23.3.6-r0)
(111/199) Installing clang17-headers (17.0.5-r0)
(112/199) Installing libclc (17.0.5-r0)
(113/199) Installing spirv-llvm-translator-libs (17.0.0-r0)
(114/199) Installing spirv-tools (1.3.261.1-r0)
(115/199) Installing clang17-libs (17.0.5-r0)
(116/199) Installing mesa-rusticl (23.3.6-r0)
(117/199) Installing mesa-xatracker (23.3.6-r0)
(118/199) Installing libxxf86vm-dev (1.1.5-r5)
(119/199) Installing mesa-dev (23.3.6-r0)
(120/199) Installing libepoxy-dev (1.5.10-r1)
(121/199) Installing libxi (1.8.1-r2)
(122/199) Installing libxi-dev (1.8.1-r2)
(123/199) Installing libxinerama (1.1.5-r3)
(124/199) Installing libxinerama-dev (1.1.5-r3)
(125/199) Installing xkeyboard-config (2.40-r0)
(126/199) Installing libxkbcommon (1.6.0-r0)
(127/199) Installing libxkbcommon-x11 (1.6.0-r0)
(128/199) Installing xz-dev (5.4.5-r0)
(129/199) Installing libxml2-dev (2.11.7-r0)
(130/199) Installing libxkbcommon-dev (1.6.0-r0)
(131/199) Installing wayland-libs-cursor (1.22.0-r4)
(132/199) Installing wayland-protocols (1.32-r2)
(133/199) Installing hicolor-icon-theme (0.17-r2)
(134/199) Installing gtk-update-icon-cache (3.24.41-r0)
(135/199) Installing libxcomposite (0.4.6-r4)
(136/199) Installing libxrender (0.9.11-r4)
(137/199) Installing libxcursor (1.2.1-r3)
(138/199) Installing libxrandr (1.5.4-r0)
(139/199) Installing libatk-1.0 (2.50.1-r0)
(140/199) Installing libxtst (1.2.4-r4)
(141/199) Installing dbus-libs (1.14.10-r0)
(142/199) Installing at-spi2-core (2.50.1-r0)
(143/199) Installing libatk-bridge-2.0 (2.50.1-r0)
(144/199) Installing freetype (2.13.2-r0)
(145/199) Installing fontconfig (2.14.2-r4)
(146/199) Installing pixman (0.42.2-r2)
(147/199) Installing cairo (1.18.0-r0)
(148/199) Installing cairo-gobject (1.18.0-r0)
(149/199) Installing avahi-libs (0.8-r16)
(150/199) Installing cups-libs (2.4.7-r0)
(151/199) Installing fribidi (1.0.13-r0)
(152/199) Installing graphite2 (1.3.14-r6)
(153/199) Installing harfbuzz (8.3.0-r0)
(154/199) Installing libxft (2.3.8-r2)
(155/199) Installing pango (1.51.0-r0)
(156/199) Installing wayland-libs-egl (1.22.0-r4)
(157/199) Installing gtk+3.0 (3.24.41-r0)
(158/199) Installing dbus-dev (1.14.10-r0)
(159/199) Installing libxtst-dev (1.2.4-r4)
(160/199) Installing at-spi2-core-dev (2.50.1-r0)
(161/199) Installing cairo-tools (1.18.0-r0)
(162/199) Installing expat (2.6.2-r0)
(163/199) Installing expat-dev (2.6.2-r0)
(164/199) Installing brotli (1.1.0-r1)
(165/199) Installing brotli-dev (1.1.0-r1)
(166/199) Installing freetype-dev (2.13.2-r0)
(167/199) Installing fontconfig-dev (2.14.2-r4)
(168/199) Installing libxrender-dev (0.9.11-r4)
(169/199) Installing pixman-dev (0.42.2-r2)
(170/199) Installing util-macros (1.20.0-r0)
(171/199) Installing xcb-util (0.4.1-r3)
(172/199) Installing xcb-util-dev (0.4.1-r3)
(173/199) Installing cairo-dev (1.18.0-r0)
(174/199) Installing fribidi-dev (1.0.13-r0)
(175/199) Installing pango-tools (1.51.0-r0)
(176/199) Installing harfbuzz-cairo (8.3.0-r0)
(177/199) Installing harfbuzz-gobject (8.3.0-r0)
(178/199) Installing icu-data-en (74.1-r0)
Executing icu-data-en-74.1-r0.post-install
*
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
*
(179/199) Installing icu-libs (74.1-r0)
(180/199) Installing harfbuzz-icu (8.3.0-r0)
(181/199) Installing harfbuzz-subset (8.3.0-r0)
(182/199) Installing graphite2-dev (1.3.14-r6)
(183/199) Installing icu (74.1-r0)
(184/199) Installing icu-dev (74.1-r0)
(185/199) Installing harfbuzz-dev (8.3.0-r0)
(186/199) Installing libxft-dev (2.3.8-r2)
(187/199) Installing pango-dev (1.51.0-r0)
(188/199) Installing wayland-dev (1.22.0-r4)
(189/199) Installing libxcomposite-dev (0.4.6-r4)
(190/199) Installing libxcursor-dev (1.2.1-r3)
(191/199) Installing libxrandr-dev (1.5.4-r0)
(192/199) Installing gtk+3.0-dev (3.24.41-r0)
(193/199) Installing perl (5.38.2-r0)
(194/199) Installing perl-error (0.17029-r2)
(195/199) Installing perl-git (2.43.0-r0)
(196/199) Installing git-perl (2.43.0-r0)
(197/199) Installing help2man (1.49.3-r0)
(198/199) Installing libusb (1.0.26-r3)
(199/199) Installing libusb-dev (1.0.26-r3)
Executing busybox-1.36.1-r15.trigger
Executing glib-2.78.4-r0.trigger
Executing shared-mime-info-2.4-r0.trigger
Executing gdk-pixbuf-2.42.10-r6.trigger
Executing gtk-update-icon-cache-3.24.41-r0.trigger
Executing gtk+3.0-3.24.41-r0.trigger
OK: 973 MiB in 360 packages
+ cmake -B build
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.1.0")
-- Checking for module 'libusb-1.0'
-- Found libusb-1.0, version 1.0.26
-- Checking for module 'gtk+-3.0'
-- Found gtk+-3.0, version 3.24.41
-- Configuring done (1.4s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/sensei-raw-ctl/build
+ cmake --build build -- package
[ 14%] [32mBuilding C object CMakeFiles/sensei-raw-ctl.dir/sensei-raw-ctl.c.o[0m
[ 28%] [32m[1mLinking C executable sensei-raw-ctl[0m
[ 28%] Built target sensei-raw-ctl
[ 42%] [34m[1mWrapping the UI file into a source file[0m
[ 57%] [32mBuilding C object CMakeFiles/sensei-raw-ctl-gui.dir/sensei-raw-ctl-gui.c.o[0m
[ 71%] [32mBuilding C object CMakeFiles/sensei-raw-ctl-gui.dir/sensei-raw-ctl-gui-ui.c.o[0m
[ 85%] [32m[1mLinking C executable sensei-raw-ctl-gui[0m
[ 85%] Built target sensei-raw-ctl-gui
[100%] [34m[1mGenerating man page for sensei-raw-ctl[0m
[100%] Built target docs
[36mRun CPack packaging tool...[0m
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: sensei-raw-ctl
CPack: - Install project: sensei-raw-ctl []
CPack: Create package
CPack: - package: /home/ci/sensei-raw-ctl/build/sensei-raw-ctl-1.0-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: sensei-raw-ctl
CPack: - Install project: sensei-raw-ctl []
CPack: Create package
CPack: - package: /home/ci/sensei-raw-ctl/build/sensei-raw-ctl-1.0-Linux-x86_64.zip generated.