- Created
- 11d ago
- Changed
- 11d ago
- Project
- p/acid
- Commit
- b766c9ef2064b5a63f59aac0aa27ae46b66ae66b
- Runner
- Alpine 3.22
- State
- Success
- Notified
- 1
- Duration
- 1m58s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.22.2-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.22.2-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.22.2-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-prel
1 Copyright (C) 1994-2015 H. Peter Anvin et al
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.12.51-0-virt (buildozer@build-3-22-x86_64) (cc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.44) #1-Alpine SMP PREEMPT_DYNAMIC 2025-10-07 15:12:03
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 10758617160 cycles
[ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000003] tsc: Detected 3096.004 MHz processor
[ 0.000443] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000468] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000470] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000504] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007291] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007399] RAMDISK: [mem 0x7f689000-0x7fffffff]
[ 0.007401] ACPI: Early table checksum verification disabled
[ 0.007403] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007406] ACPI: RSDT 0x00000000BFFE2458 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007411] ACPI: FACP 0x00000000BFFE22F4 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007414] ACPI: DSDT 0x00000000BFFE0040 0022B4 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007417] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007419] ACPI: APIC 0x00000000BFFE2368 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007421] ACPI: HPET 0x00000000BFFE23F8 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007424] ACPI: WAET 0x00000000BFFE2430 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007425] ACPI: Reserving FACP table memory at [mem 0xbffe22f4-0xbffe2367]
[ 0.007426] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22f3]
[ 0.007427] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007428] ACPI: Reserving APIC table memory at [mem 0xbffe2368-0xbffe23f7]
[ 0.007428] ACPI: Reserving HPET table memory at [mem 0xbffe23f8-0xbffe242f]
[ 0.007429] ACPI: Reserving WAET table memory at [mem 0xbffe2430-0xbffe2457]
[ 0.007652] No NUMA configuration found
[ 0.007652] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.007654] NODE_DATA(0) allocated [mem 0x13fffbd80-0x13fffffff]
[ 0.007752] Zone ranges:
[ 0.007752] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007754] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007755] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007756] Movable zone start for each node
[ 0.007756] Early memory node ranges
[ 0.007756] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.007757] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.007758] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007759] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.007846] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007858] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013541] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.013869] ACPI: PM-Timer IO Port: 0x608
[ 0.013882] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.013913] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.013916] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013917] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.013918] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013919] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.013919] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.013923] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013924] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013930] CPU topo: Max. logical packages: 1
[ 0.013931] CPU topo: Max. logical dies: 1
[ 0.013931] CPU topo: Max. dies per package: 1
[ 0.013934] CPU topo: Max. threads per core: 1
[ 0.013934] CPU topo: Num. cores per package: 4
[ 0.013935] CPU topo: Num. threads per package: 4
[ 0.013935] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.013949] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.013960] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.013961] Booting paravirtualized kernel on KVM
[ 0.013962] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.017675] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.017873] percpu: Embedded 60 pages/cpu s205656 r8192 d31912 u524288
[ 0.017895] kvm-guest: PV spinlocks disabled, no host support
[ 0.017895] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.017939] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.018263] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.018411] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.018476] Fallback order for Node 0: 0
[ 0.018478] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.018479] Policy zone: Normal
[ 0.018747] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.018750] software IO TLB: area num 4.
[ 0.041398] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.041464] Kernel/User page tables isolation: enabled
[ 0.042092] Dynamic Preempt: none
[ 0.042297] rcu: Preemptible hierarchical RCU implementation.
[ 0.042297] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.042299] Trampoline variant of Tasks RCU enabled.
[ 0.042299] Tracing variant of Tasks RCU enabled.
[ 0.042300] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.042300] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.042308] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.042309] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.046349] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.046562] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.046646] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.050589] Console: colour VGA+ 80x25
[ 0.050621] printk: legacy console [ttyS0] enabled
[ 0.132274] ACPI: Core revision 20240827
[ 0.132919] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.134219] APIC: Switch to symmetric I/O mode setup
[ 0.135032] x2apic enabled
[ 0.135723] APIC: Switched APIC routing to: physical x2apic
[ 0.137473] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.138291] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca0894888d, max_idle_ns: 440795350336 ns
[ 0.139617] Calibrating delay loop (skipped) preset value.. 6192.00 BogoMIPS (lpj=3096004)
[ 0.140691] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.141617] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.142353] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.142618] Spectre V2 : Mitigation: Retpolines
[ 0.143617] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.144617] Speculative Store Bypass: Vulnerable
[ 0.145617] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.146617] MMIO Stale Data: Unknown: No mitigations
[ 0.147226] active return thunk: its_return_thunk
[ 0.147617] ITS: Mitigation: Aligned branch/return thunks
[ 0.148293] x86/fpu: x87 FPU will use FXSAVE
[ 0.161672] Freeing SMP alternatives memory: 36K
[ 0.162278] pid_max: default: 32768 minimum: 301
[ 0.163049] LSM: initializing lsm=lockdown,capability,landlock
[ 0.164084] landlock: Up and running.
[ 0.164717] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.165621] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.269757] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.270802] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.271641] signal: max sigframe size: 1440
[ 0.272646] rcu: Hierarchical SRCU implementation.
[ 0.273192] rcu: Max phase no-delay instances is 400.
[ 0.273650] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.277563] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.277662] smp: Bringing up secondary CPUs ...
[ 0.278703] smpboot: x86: Booting SMP configuration:
[ 0.279619] .... node #0, CPUs: #1 #2 #3
[ 0.283808] smp: Brought up 1 node, 4 CPUs
[ 0.284618] smpboot: Total of 4 processors activated (24768.03 BogoMIPS)
[ 0.285863] Memory: 4002128K/4193760K available (14336K kernel code, 1993K rwdata, 9232K rodata, 2864K init, 1300K bss, 186532K reserved, 0K cma-reserved)
[ 0.286798] devtmpfs: initialized
[ 0.287641] x86/mm: Memory block size: 128MB
[ 0.288966] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.289622] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.291947] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.292717] audit: initializing netlink subsys (disabled)
[ 0.293624] audit: type=2000 audit(1763923175.296:1): state=initialized audit_enabled=0 res=1
[ 0.293662] thermal_sys: Registered thermal governor 'step_wise'
[ 0.294626] cpuidle: using governor ladder
[ 0.295622] cpuidle: using governor menu
[ 0.296732] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.297872] PCI: Using configuration type 1 for base access
[ 0.298688] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.299674] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.300617] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.301782] ACPI: Added _OSI(Module Device)
[ 0.302618] ACPI: Added _OSI(Processor Device)
[ 0.303177] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.304719] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.306709] ACPI: Interpreter enabled
[ 0.307218] ACPI: PM: (supports S0 S3 S5)
[ 0.307618] ACPI: Using IOAPIC for interrupt routing
[ 0.308224] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.308618] PCI: Using E820 reservations for host bridge windows
[ 0.309675] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.312482] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.312620] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.313618] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.314624] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.315861] acpiphp: Slot [3] registered
[ 0.316636] acpiphp: Slot [4] registered
[ 0.317139] acpiphp: Slot [5] registered
[ 0.317632] acpiphp: Slot [6] registered
[ 0.318141] acpiphp: Slot [7] registered
[ 0.318630] acpiphp: Slot [8] registered
[ 0.319118] acpiphp: Slot [9] registered
[ 0.319630] acpiphp: Slot [10] registered
[ 0.320170] acpiphp: Slot [11] registered
[ 0.320629] acpiphp: Slot [12] registered
[ 0.321630] acpiphp: Slot [13] registered
[ 0.322177] acpiphp: Slot [14] registered
[ 0.322658] acpiphp: Slot [15] registered
[ 0.323122] acpiphp: Slot [16] registered
[ 0.323632] acpiphp: Slot [17] registered
[ 0.324094] acpiphp: Slot [18] registered
[ 0.324634] acpiphp: Slot [19] registered
[ 0.325202] acpiphp: Slot [20] registered
[ 0.325629] acpiphp: Slot [21] registered
[ 0.326631] acpiphp: Slot [22] registered
[ 0.327135] acpiphp: Slot [23] registered
[ 0.327630] acpiphp: Slot [24] registered
[ 0.328146] acpiphp: Slot [25] registered
[ 0.328658] acpiphp: Slot [26] registered
[ 0.329154] acpiphp: Slot [27] registered
[ 0.329630] acpiphp: Slot [28] registered
[ 0.330106] acpiphp: Slot [29] registered
[ 0.330630] acpiphp: Slot [30] registered
[ 0.331110] acpiphp: Slot [31] registered
[ 0.331626] PCI host bridge to bus 0000:00
[ 0.332146] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.332617] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.333618] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.334618] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.335618] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.336618] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.337652] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.338986] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.340961] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.344320] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.346023] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.346618] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.347617] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.348617] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.349531] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.351008] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.351625] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.352802] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.355636] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.358656] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.367646] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.368650] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.370004] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.372618] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.374618] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.378619] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.381498] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.384220] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.386618] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.389094] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.393618] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.396483] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.397460] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.399618] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.405619] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.409181] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.409700] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.410700] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.411502] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.411665] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.412932] iommu: Default domain type: Translated
[ 0.413620] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.414794] SCSI subsystem initialized
[ 0.415265] pps_core: LinuxPPS API ver. 1 registered
[ 0.415618] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.416622] PTP clock support registered
[ 0.417880] PCI: Using ACPI for IRQ routing
[ 0.418748] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.419679] clocksource: Switched to clocksource kvm-clock
[ 0.420789] VFS: Disk quotas dquot_6.6.0
[ 0.421392] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.422333] pnp: PnP ACPI init
[ 0.422929] pnp: PnP ACPI: found 6 devices
[ 0.430395] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.431683] NET: Registered PF_INET protocol family
[ 0.432492] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.442276] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.443677] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.444846] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.446149] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.447318] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.448456] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.449625] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.450582] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.451691] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.452489] NET: Registered PF_XDP protocol family
[ 0.453172] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.454057] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.454901] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.455878] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.456845] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.457867] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.458707] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.459563] PCI: CLS 0 bytes, default 64
[ 0.460123] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.460235] Unpacking initramfs...
[ 0.460971] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.462579] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca0894888d, max_idle_ns: 440795350336 ns
[ 0.464276] Initialise system trusted keyrings
[ 0.465037] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.466044] Key type asymmetric registered
[ 0.466641] Asymmetric key parser 'x509' registered
[ 0.467401] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.468726] io scheduler mq-deadline registered
[ 0.469379] io scheduler kyber registered
[ 0.469980] io scheduler bfq registered
[ 0.471639] ERST DBG: ERST support is disabled.
[ 0.472720] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.474726] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.477804] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.480447] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.481414] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.483313] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.484659] scsi host0: ata_piix
[ 0.485280] scsi host1: ata_piix
[ 0.485706] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.486642] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.487628] hv_vmbus: registering driver hv_netvsc
[ 0.488393] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.490185] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.490836] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.491518] hv_vmbus: registering driver hyperv_keyboard
[ 0.492244] rtc_cmos 00:05: RTC can wake from S4
[ 0.493483] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.494664] rtc_cmos 00:05: registered as rtc0
[ 0.495489] rtc_cmos 00:05: setting system clock to 2025-11-23T18:39:35 UTC (1763923175)
[ 0.496692] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.497809] intel_pstate: CPU model not supported
[ 0.498629] gre: GRE over IPv4 demultiplexor driver
[ 0.499475] NET: Registered PF_INET6 protocol family
[ 0.500545] Segment Routing with IPv6
[ 0.501072] In-situ OAM (IOAM) with IPv6
[ 0.501681] Key type dns_resolver registered
[ 0.502298] IPI shorthand broadcast: enabled
[ 0.504113] sched_clock: Marking stable (415002565, 89048475)->(523237802, -19186762)
[ 0.505225] registered taskstats version 1
[ 0.505837] Loading compiled-in X.509 certificates
[ 0.536024] Freeing initrd memory: 9692K
[ 0.540780] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.543938] Demotion targets for Node 0: null
[ 0.544848] Key type .fscrypt registered
[ 0.545497] Key type fscrypt-provisioning registered
[ 0.639746] ata2: found unknown device (class 0)
[ 0.643762] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.649731] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.681118] Freeing unused kernel image (initmem) memory: 2864K
[ 0.684429] Write protecting the kernel read-only data: 24576k
[ 0.688441] Freeing unused kernel image (rodata/data gap) memory: 1008K
[ 0.691507] rodata_test: all tests were successful
[ 0.693579] Run /init as init process
[ 0.723502] Alpine Init 3.12.0-r0
Alpine Init 3.12.0-r0
[ 0.726805] Loading boot drivers...
* Loading boot drivers: [ 0.778154] ACPI: bus type USB registered
[ 0.778749] usbcore: registered new interface driver usbfs
[ 0.779557] usbcore: registered new interface driver hub
[ 0.780349] usbcore: registered new device driver usb
[ 0.785131] usbcore: registered new interface driver usb-storage
[ 0.855969] loop: module loaded
[ 0.883612] ACPI: bus type drm_connector registered
[ 0.899134] Loading boot drivers: ok.
ok.
[ 0.900752] Mounting root...
* Mounting root: [ 0.916603] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 0.917464] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 0.928838] [drm] Found bochs VGA, ID 0xb0c5.
[ 0.929370] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 0.931401] [drm] Found EDID data blob.
[ 0.931893] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 0.938843] Console: switching to colour frame buffer device 160x50
[ 0.940110] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 0.971851] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 0.972531] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.989756] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 0.991660] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 0.994985] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 0.996538] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.036081] block sr0: the capability attribute has been deprecated.
[ 1.821019] EXT4-fs (vda): mounted filesystem bebb0acc-f67f-467a-8118-24a5ab9c45d4 ro with ordered data mode. Quota mode: none.
[ 1.827779] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.62.6 is starting up Linux 6.12.51-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
[ 2.351068] random: crng init done
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Mounting bpf filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5559/51792 files, 168998/206848 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 24.3.1 running 'init-local' at Sun, 23 Nov 2025 18:39:37 +0000. Up 3.77 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.2.3 starting
DUID 00:01:00:01:30:b6:11:6a:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::e048:cc9c:cb86:3341/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 24.3.1 running 'init' at Sun, 23 Nov 2025 18:39:51 +0000. Up 17.74 seconds.
ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::e048:cc9c:cb86:3341/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:bq5i9/dtzbrOyIZdqjpJ4Xt7oIdwFRAXh4aMKe53wy4 root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| +o+oo. |
| . o o.+. |
| . . . . |
| . . . |
| . oSo |
| . o.B . . |
| . *o* + o o |
| o EoB =.=+. o|
| . o.++*o*+o*o |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:EoerfEocOguWVXPlsEVVadV2cIf+HE7rZ3NlgQV6Vek root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| ..+...o==B|
| .* .oo+=|
| ooo.. ..o+..|
| . o+ ...E |
| .. o S oo+|
| o+ o . o=|
|.oo = . ...|
|.. + o o+|
| . . .+|
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:lS6q3rmu77qPRuiv9GnzfMBFOlA70ConiNNMu3ucCRE root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| .o. |
| E ..... . |
|.= o ooo o |
|+ B o o..o |
| . B . oS . |
| + . o. . |
| ..= o.. |
| .o.O* .. |
| .B@@@o |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 24.3.1 running 'modules:config' at Sun, 23 Nov 2025 18:39:52 +0000. Up 18.79 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 24.3.1 running 'modules:final' at Sun, 23 Nov 2025 18:39:53 +0000. Up 19.30 seconds.
fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20250911-r0)
Executing busybox-1.37.0-r19.trigger
Executing ca-certificates-20250911-r0.trigger
OK: 133 MiB in 148 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:EoerfEocOguWVXPlsEVVadV2cIf+HE7rZ3NlgQV6Vek root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:lS6q3rmu77qPRuiv9GnzfMBFOlA70ConiNNMu3ucCRE root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:bq5i9/dtzbrOyIZdqjpJ4Xt7oIdwFRAXh4aMKe53wy4 root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBPA4q+GVCwPH2OZaPp6ItanZyHEbYqSqvd/hJEVNA3S2EHbXFDp84L7WRXTyasNj0JA5YYYD1D16joE+8+LO2Ew= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIJ6sgXeOQBqtTUfUlQv6stHMODThcfX3NLiEpTLbWjFc root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.3.1 finished at Sun, 23 Nov 2025 18:39:56 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 22.84 seconds
[ ok ]
Welcome to Alpine Linux 3.22
Kernel 6.12.51-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
.........
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
(1/12) Upgrading busybox (1.37.0-r19 -> 1.37.0-r20)
Executing busybox-1.37.0-r20.post-upgrade
(2/12) Upgrading busybox-binsh (1.37.0-r19 -> 1.37.0-r20)
(3/12) Upgrading busybox-mdev-openrc (1.37.0-r19 -> 1.37.0-r20)
(4/12) Upgrading alpine-conf (3.20.0-r0 -> 3.20.0-r1)
(5/12) Upgrading ssl_client (1.37.0-r19 -> 1.37.0-r20)
(6/12) Upgrading busybox-openrc (1.37.0-r19 -> 1.37.0-r20)
(7/12) Upgrading busybox-suid (1.37.0-r19 -> 1.37.0-r20)
(8/12) Upgrading python3 (3.12.11-r0 -> 3.12.12-r0)
(9/12) Upgrading python3-pycache-pyc0 (3.12.11-r0 -> 3.12.12-r0)
(10/12) Upgrading pyc (3.12.11-r0 -> 3.12.12-r0)
(11/12) Upgrading python3-pyc (3.12.11-r0 -> 3.12.12-r0)
(12/12) Upgrading linux-virt (6.12.51-r0 -> 6.12.58-r0)
Executing busybox-1.37.0-r20.trigger
Executing kmod-34.2-r0.trigger
Executing mkinitfs-3.12.0-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.12.58-0-virt
Executing syslinux-6.04_pre1-r16.trigger
/boot is device /dev/vda
OK: 133 MiB in 148 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.34.5-r0)
(3/10) Installing nghttp2-libs (1.65.0-r0)
(4/10) Installing libpsl (0.21.5-r3)
(5/10) Installing libcurl (8.14.1-r2)
(6/10) Installing pcre2 (10.46-r0)
(7/10) Installing git (2.49.1-r0)
(8/10) Installing git-init-template (2.49.1-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.37.0-r20.trigger
OK: 143 MiB in 158 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/acid.git acid
Cloning into 'acid'...
remote: Enumerating objects: 122, done.
remote: Counting objects: 100% (122/122), done.
remote: Compressing objects: 100% (121/121), done.
remote: Total 122 (delta 74), reused 0 (delta 0), pack-reused 0 (from 0)
Receiving objects: 100% (122/122), 74.49 KiB | 4.96 MiB/s, done.
Resolving deltas: 100% (74/74), done.
+ cd acid
+ git -c 'advice.detachedHead=false' checkout b766c9ef2064b5a63f59aac0aa27ae46b66ae66b
HEAD is now at b766c9e Improve current Arch Linux run log
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=b766c9e
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/b766c9e/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base go asciidoctor
(1/22) Installing ruby-libs (3.4.4-r0)
(2/22) Installing libucontext (1.3.2-r0)
(3/22) Installing ruby (3.4.4-r0)
(4/22) Installing asciidoctor (2.0.23-r1)
(5/22) Installing jansson (2.14.1-r0)
(6/22) Installing binutils (2.44-r3)
(7/22) Installing libmagic (5.46-r2)
(8/22) Installing file (5.46-r2)
(9/22) Installing libgomp (14.2.0-r6)
(10/22) Installing libatomic (14.2.0-r6)
(11/22) Installing isl26 (0.26-r1)
(12/22) Installing mpfr4 (4.2.1_p1-r0)
(13/22) Installing mpc1 (1.3.1-r1)
(14/22) Installing gcc (14.2.0-r6)
(15/22) Installing libstdc++-dev (14.2.0-r6)
(16/22) Installing musl-dev (1.2.5-r10)
(17/22) Installing g++ (14.2.0-r6)
(18/22) Installing make (4.4.1-r3)
(19/22) Installing fortify-headers (1.1-r5)
(20/22) Installing patch (2.8-r0)
(21/22) Installing build-base (0.5-r3)
(22/22) Installing go (1.24.10-r0)
Executing busybox-1.37.0-r20.trigger
OK: 588 MiB in 180 packages
+ make all test
go build -ldflags "-X 'main.projectVersion=dev'" -o acid
go: downloading github.com/mattn/go-sqlite3 v1.14.24
go: downloading github.com/pkg/sftp v1.13.7
go: downloading golang.org/x/crypto v0.31.0
go: downloading gopkg.in/yaml.v3 v3.0.1
go: downloading github.com/kr/fs v0.1.0
asciidoctor -b manpage -a release-version=dev -o acid.1 acid.adoc || \
a2x -d manpage -f manpage -a release-version=dev acid.adoc
go test
PASS
ok janouch.name/acid 0.003s
Deploy log