- Created
- 7h ago
- Changed
- 7h ago
- Project
- p/nncmpp
- Commit
- 6aa822fe34510780d9dffbee8e847fc951d9096c
- Runner
- Alpine 3.22
- State
- Success
- Notified
- 1
- Duration
- 53s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.22.2-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.22.2-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.22.2-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.12.51-0-virt (buildozer@build-3-22-x86_64) (cc (Alpine 14.2.0) 14.2.0, GNU ld (GNU Binutils) 2.44) #1-Alpine SMP PREEMPT_DYNAMIC 2025-10-07 15:12:03
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 10814393298 cycles
[ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000003] tsc: Detected 3096.004 MHz processor
[ 0.000443] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000468] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000471] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000504] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007286] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007353] RAMDISK: [mem 0x7f689000-0x7fffffff]
[ 0.007354] ACPI: Early table checksum verification disabled
[ 0.007356] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007359] ACPI: RSDT 0x00000000BFFE2458 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007363] ACPI: FACP 0x00000000BFFE22F4 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007367] ACPI: DSDT 0x00000000BFFE0040 0022B4 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007370] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007372] ACPI: APIC 0x00000000BFFE2368 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007374] ACPI: HPET 0x00000000BFFE23F8 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007377] ACPI: WAET 0x00000000BFFE2430 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007378] ACPI: Reserving FACP table memory at [mem 0xbffe22f4-0xbffe2367]
[ 0.007379] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22f3]
[ 0.007380] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007381] ACPI: Reserving APIC table memory at [mem 0xbffe2368-0xbffe23f7]
[ 0.007381] ACPI: Reserving HPET table memory at [mem 0xbffe23f8-0xbffe242f]
[ 0.007382] ACPI: Reserving WAET table memory at [mem 0xbffe2430-0xbffe2457]
[ 0.007602] No NUMA configuration found
[ 0.007603] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.007605] NODE_DATA(0) allocated [mem 0x13fffbd80-0x13fffffff]
[ 0.007706] Zone ranges:
[ 0.007706] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007708] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007709] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007710] Movable zone start for each node
[ 0.007710] Early memory node ranges
[ 0.007710] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.007711] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.007712] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007713] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.007800] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007812] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013292] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.013619] ACPI: PM-Timer IO Port: 0x608
[ 0.013632] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.013663] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.013666] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013667] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.013668] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013669] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.013670] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.013673] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013674] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013681] CPU topo: Max. logical packages: 1
[ 0.013681] CPU topo: Max. logical dies: 1
[ 0.013682] CPU topo: Max. dies per package: 1
[ 0.013685] CPU topo: Max. threads per core: 1
[ 0.013685] CPU topo: Num. cores per package: 4
[ 0.013685] CPU topo: Num. threads per package: 4
[ 0.013686] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.013700] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.013710] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.013711] Booting paravirtualized kernel on KVM
[ 0.013712] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.017116] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.017314] percpu: Embedded 60 pages/cpu s205656 r8192 d31912 u524288
[ 0.017335] kvm-guest: PV spinlocks disabled, no host support
[ 0.017336] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.017379] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.017700] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.017863] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.017926] Fallback order for Node 0: 0
[ 0.017928] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.017929] Policy zone: Normal
[ 0.018116] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.018119] software IO TLB: area num 4.
[ 0.040976] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.041042] Kernel/User page tables isolation: enabled
[ 0.041698] Dynamic Preempt: none
[ 0.041860] rcu: Preemptible hierarchical RCU implementation.
[ 0.041860] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.041861] Trampoline variant of Tasks RCU enabled.
[ 0.041862] Tracing variant of Tasks RCU enabled.
[ 0.041862] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.041863] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.041870] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.041872] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.045961] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.046156] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.046243] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.050135] Console: colour VGA+ 80x25
[ 0.050168] printk: legacy console [ttyS0] enabled
[ 0.132239] ACPI: Core revision 20240827
[ 0.132852] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.134203] APIC: Switch to symmetric I/O mode setup
[ 0.134996] x2apic enabled
[ 0.135649] APIC: Switched APIC routing to: physical x2apic
[ 0.137366] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.138179] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca0894888d, max_idle_ns: 440795350336 ns
[ 0.139533] Calibrating delay loop (skipped) preset value.. 6192.00 BogoMIPS (lpj=3096004)
[ 0.140609] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.141532] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.142218] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.142533] Spectre V2 : Mitigation: Retpolines
[ 0.143532] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.144532] Speculative Store Bypass: Vulnerable
[ 0.145069] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.145532] MMIO Stale Data: Unknown: No mitigations
[ 0.146533] active return thunk: its_return_thunk
[ 0.147081] ITS: Mitigation: Aligned branch/return thunks
[ 0.147533] x86/fpu: x87 FPU will use FXSAVE
[ 0.161323] Freeing SMP alternatives memory: 36K
[ 0.161535] pid_max: default: 32768 minimum: 301
[ 0.162953] LSM: initializing lsm=lockdown,capability,landlock
[ 0.163965] landlock: Up and running.
[ 0.164635] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.165535] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.269202] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.269756] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.270556] signal: max sigframe size: 1440
[ 0.271560] rcu: Hierarchical SRCU implementation.
[ 0.272171] rcu: Max phase no-delay instances is 400.
[ 0.272566] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.276236] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.276579] smp: Bringing up secondary CPUs ...
[ 0.277616] smpboot: x86: Booting SMP configuration:
[ 0.278280] .... node #0, CPUs: #1 #2 #3
[ 0.281585] smp: Brought up 1 node, 4 CPUs
[ 0.283532] smpboot: Total of 4 processors activated (24768.03 BogoMIPS)
[ 0.284576] Memory: 4002124K/4193760K available (14336K kernel code, 1993K rwdata, 9232K rodata, 2864K init, 1300K bss, 186536K reserved, 0K cma-reserved)
[ 0.286668] devtmpfs: initialized
[ 0.287012] x86/mm: Memory block size: 128MB
[ 0.287937] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.289538] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.291294] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.291611] audit: initializing netlink subsys (disabled)
[ 0.292593] audit: type=2000 audit(1764372028.598:1): state=initialized audit_enabled=0 res=1
[ 0.292623] thermal_sys: Registered thermal governor 'step_wise'
[ 0.293542] cpuidle: using governor ladder
[ 0.295537] cpuidle: using governor menu
[ 0.296183] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.297661] PCI: Using configuration type 1 for base access
[ 0.298587] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.299603] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.300533] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.302643] ACPI: Added _OSI(Module Device)
[ 0.303182] ACPI: Added _OSI(Processor Device)
[ 0.303533] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.305557] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.307645] ACPI: Interpreter enabled
[ 0.308188] ACPI: PM: (supports S0 S3 S5)
[ 0.308533] ACPI: Using IOAPIC for interrupt routing
[ 0.309534] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.310532] PCI: Using E820 reservations for host bridge windows
[ 0.311600] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.314467] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.314536] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.315533] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.316539] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.317827] acpiphp: Slot [3] registered
[ 0.318431] acpiphp: Slot [4] registered
[ 0.318547] acpiphp: Slot [5] registered
[ 0.319546] acpiphp: Slot [6] registered
[ 0.320143] acpiphp: Slot [7] registered
[ 0.320559] acpiphp: Slot [8] registered
[ 0.321135] acpiphp: Slot [9] registered
[ 0.321547] acpiphp: Slot [10] registered
[ 0.322550] acpiphp: Slot [11] registered
[ 0.323163] acpiphp: Slot [12] registered
[ 0.323569] acpiphp: Slot [13] registered
[ 0.324187] acpiphp: Slot [14] registered
[ 0.324546] acpiphp: Slot [15] registered
[ 0.325546] acpiphp: Slot [16] registered
[ 0.326145] acpiphp: Slot [17] registered
[ 0.326547] acpiphp: Slot [18] registered
[ 0.327548] acpiphp: Slot [19] registered
[ 0.328144] acpiphp: Slot [20] registered
[ 0.328546] acpiphp: Slot [21] registered
[ 0.329161] acpiphp: Slot [22] registered
[ 0.329547] acpiphp: Slot [23] registered
[ 0.330547] acpiphp: Slot [24] registered
[ 0.331147] acpiphp: Slot [25] registered
[ 0.331551] acpiphp: Slot [26] registered
[ 0.332167] acpiphp: Slot [27] registered
[ 0.332562] acpiphp: Slot [28] registered
[ 0.333546] acpiphp: Slot [29] registered
[ 0.334137] acpiphp: Slot [30] registered
[ 0.334547] acpiphp: Slot [31] registered
[ 0.335190] PCI host bridge to bus 0000:00
[ 0.335535] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.336533] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.337533] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.338533] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.339533] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.340533] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.341572] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.343701] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.345071] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.348306] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.350175] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.350533] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.351533] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.352533] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.353683] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.354958] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.355542] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.356722] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.360565] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.364960] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.372579] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.374660] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.375960] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.378173] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.379223] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.383533] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.385241] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.387145] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.389533] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.391499] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.395533] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.398541] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.400533] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.402533] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.407955] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.411663] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.412624] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.413617] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.414619] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.415575] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.417164] iommu: Default domain type: Translated
[ 0.417535] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.418749] SCSI subsystem initialized
[ 0.419563] pps_core: LinuxPPS API ver. 1 registered
[ 0.420318] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.420538] PTP clock support registered
[ 0.421752] PCI: Using ACPI for IRQ routing
[ 0.422597] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.423615] clocksource: Switched to clocksource kvm-clock
[ 0.425512] VFS: Disk quotas dquot_6.6.0
[ 0.426073] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.427002] pnp: PnP ACPI init
[ 0.427648] pnp: PnP ACPI: found 6 devices
[ 0.434667] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.435986] NET: Registered PF_INET protocol family
[ 0.436714] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.446163] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.447349] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.448386] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.449453] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.450516] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.451486] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.452568] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.453392] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.454340] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.455071] NET: Registered PF_XDP protocol family
[ 0.455649] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.456421] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.457193] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.458049] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.458901] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.459764] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.460462] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.461286] PCI: CLS 0 bytes, default 64
[ 0.461787] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.461920] Unpacking initramfs...
[ 0.462705] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.462776] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca0894888d, max_idle_ns: 440795350336 ns
[ 0.466390] Initialise system trusted keyrings
[ 0.468135] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.469293] Key type asymmetric registered
[ 0.469992] Asymmetric key parser 'x509' registered
[ 0.470848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.472205] io scheduler mq-deadline registered
[ 0.472977] io scheduler kyber registered
[ 0.473713] io scheduler bfq registered
[ 0.477068] ERST DBG: ERST support is disabled.
[ 0.478211] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.480130] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.481862] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.483438] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.484361] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.486033] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.487503] scsi host0: ata_piix
[ 0.488197] scsi host1: ata_piix
[ 0.488719] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.489868] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.491056] hv_vmbus: registering driver hv_netvsc
[ 0.491910] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.493649] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.494405] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.495211] hv_vmbus: registering driver hyperv_keyboard
[ 0.495999] rtc_cmos 00:05: RTC can wake from S4
[ 0.497102] rtc_cmos 00:05: registered as rtc0
[ 0.497864] rtc_cmos 00:05: setting system clock to 2025-11-28T23:20:28 UTC (1764372028)
[ 0.499079] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.500116] intel_pstate: CPU model not supported
[ 0.500971] gre: GRE over IPv4 demultiplexor driver
[ 0.501815] NET: Registered PF_INET6 protocol family
[ 0.502898] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.503080] Segment Routing with IPv6
[ 0.504888] In-situ OAM (IOAM) with IPv6
[ 0.505546] Key type dns_resolver registered
[ 0.506199] IPI shorthand broadcast: enabled
[ 0.508742] sched_clock: Marking stable (419006027, 89369994)->(518793506, -10417485)
[ 0.510288] registered taskstats version 1
[ 0.511171] Loading compiled-in X.509 certificates
[ 0.535410] Freeing initrd memory: 9692K
[ 0.540154] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.542999] Demotion targets for Node 0: null
[ 0.543945] Key type .fscrypt registered
[ 0.544525] Key type fscrypt-provisioning registered
[ 0.647946] ata2: found unknown device (class 0)
[ 0.650421] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.654105] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.669389] Freeing unused kernel image (initmem) memory: 2864K
[ 0.671128] Write protecting the kernel read-only data: 24576k
[ 0.673497] Freeing unused kernel image (rodata/data gap) memory: 1008K
[ 0.675271] rodata_test: all tests were successful
[ 0.676501] Run /init as init process
[ 0.696794] Alpine Init 3.12.0-r0
Alpine Init 3.12.0-r0
[ 0.698833] Loading boot drivers...
* Loading boot drivers: [ 0.736512] ACPI: bus type USB registered
[ 0.737228] usbcore: registered new interface driver usbfs
[ 0.738176] usbcore: registered new interface driver hub
[ 0.739039] usbcore: registered new device driver usb
[ 0.743785] usbcore: registered new interface driver usb-storage
[ 0.822277] loop: module loaded
[ 0.848736] ACPI: bus type drm_connector registered
[ 0.863464] Loading boot drivers: ok.
ok.
[ 0.865234] Mounting root...
* Mounting root: [ 0.882288] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 0.883182] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 0.894866] [drm] Found bochs VGA, ID 0xb0c5.
[ 0.895491] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 0.897660] [drm] Found EDID data blob.
[ 0.898372] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 0.905224] Console: switching to colour frame buffer device 160x50
[ 0.907088] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 0.967983] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 0.971855] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.011502] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.017262] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.022929] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.028904] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.096209] block sr0: the capability attribute has been deprecated.
[ 1.865494] EXT4-fs (vda): mounted filesystem bebb0acc-f67f-467a-8118-24a5ab9c45d4 ro with ordered data mode. Quota mode: none.
[ 1.870581] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.62.6 is starting up Linux 6.12.51-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
[ 2.352448] random: crng init done
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Mounting bpf filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5559/51792 files, 168998/206848 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 24.3.1 running 'init-local' at Fri, 28 Nov 2025 23:20:30 +0000. Up 3.59 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.2.3 starting
DUID 00:01:00:01:30:bc:ea:bf:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::983f:7375:9b5:ef25/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 24.3.1 running 'init' at Fri, 28 Nov 2025 23:20:43 +0000. Up 16.70 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::983f:7375:9b5:ef25/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:oeZML4zloR9f8Jz5zrs4y2Vg9b+uay1pZrhX0YrP+ZU root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| |
| |
| . . .|
| . . . . ..|
| * S o ....|
| @ o = +. .o.|
| o B . * +o+Eo|
| . + o.B O+.o|
| . . +=&==+.|
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:I7yhcll0/FnaJhqVhLZANUNuhJ1KmNsnn6e5JU8voE0 root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| +.=*o. |
| o ++=+ . |
| +.+=.o . |
| .o+ooo = |
| =+S.= o |
| + +E+.o |
| . + .+o=o |
| o . +=.. |
| ..... |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:xdRrgMQOcP1vDLSrZAlBHLDhbS4FGx57vZi4esnBoUU root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| B=+=.... |
| oE@+.+oo . |
| .* =+.ooo . |
| o*.o.o+ o |
| +o.+.S. * |
| . oo + . + |
| ..o o . . |
| .+ . |
| .. |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 24.3.1 running 'modules:config' at Fri, 28 Nov 2025 23:20:44 +0000. Up 17.60 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 24.3.1 running 'modules:final' at Fri, 28 Nov 2025 23:20:45 +0000. Up 18.09 seconds.
fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.22/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20250911-r0)
Executing busybox-1.37.0-r19.trigger
Executing ca-certificates-20250911-r0.trigger
OK: 133 MiB in 148 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 256 SHA256:I7yhcll0/FnaJhqVhLZANUNuhJ1KmNsnn6e5JU8voE0 root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:xdRrgMQOcP1vDLSrZAlBHLDhbS4FGx57vZi4esnBoUU root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:oeZML4zloR9f8Jz5zrs4y2Vg9b+uay1pZrhX0YrP+ZU root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBJuQfwudAhecdBL0cFHuqS2ljI7CCic3jnk0SsANvDI2dJMwzPNLYJqe7KLzQCpLn6YzaMJR8URJKVcEVSlSO/c= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEYNkuKnaAWoZurrAhs4I8mc00mXzmTfVCOoRoczV55Z root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 24.3.1 finished at Fri, 28 Nov 2025 23:20:46 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 19.72 seconds
[ ok ]
Welcome to Alpine Linux 3.22
Kernel 6.12.51-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
(1/21) Upgrading busybox (1.37.0-r19 -> 1.37.0-r20)
Executing busybox-1.37.0-r20.post-upgrade
(2/21) Upgrading busybox-binsh (1.37.0-r19 -> 1.37.0-r20)
(3/21) Upgrading busybox-mdev-openrc (1.37.0-r19 -> 1.37.0-r20)
(4/21) Upgrading alpine-conf (3.20.0-r0 -> 3.20.0-r1)
(5/21) Upgrading ssl_client (1.37.0-r19 -> 1.37.0-r20)
(6/21) Upgrading busybox-openrc (1.37.0-r19 -> 1.37.0-r20)
(7/21) Upgrading busybox-suid (1.37.0-r19 -> 1.37.0-r20)
(8/21) Upgrading python3 (3.12.11-r0 -> 3.12.12-r0)
(9/21) Upgrading python3-pycache-pyc0 (3.12.11-r0 -> 3.12.12-r0)
(10/21) Upgrading pyc (3.12.11-r0 -> 3.12.12-r0)
(11/21) Upgrading python3-pyc (3.12.11-r0 -> 3.12.12-r0)
(12/21) Upgrading linux-virt (6.12.51-r0 -> 6.12.59-r0)
(13/21) Upgrading openssh-keygen (10.0_p1-r9 -> 10.0_p1-r10)
(14/21) Upgrading openssh-client-common (10.0_p1-r9 -> 10.0_p1-r10)
(15/21) Upgrading openssh-client-default (10.0_p1-r9 -> 10.0_p1-r10)
(16/21) Upgrading openssh-sftp-server (10.0_p1-r9 -> 10.0_p1-r10)
(17/21) Upgrading openssh-server-common (10.0_p1-r9 -> 10.0_p1-r10)
(18/21) Upgrading openssh-server-common-openrc (10.0_p1-r9 -> 10.0_p1-r10)
(19/21) Upgrading openssh-server (10.0_p1-r9 -> 10.0_p1-r10)
Executing openssh-server-10.0_p1-r10.post-upgrade
(20/21) Upgrading openssh (10.0_p1-r9 -> 10.0_p1-r10)
(21/21) Upgrading openssh-server-pam (10.0_p1-r9 -> 10.0_p1-r10)
Executing busybox-1.37.0-r20.trigger
Executing kmod-34.2-r0.trigger
Executing mkinitfs-3.12.0-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.12.59-0-virt
Executing syslinux-6.04_pre1-r16.trigger
/boot is device /dev/vda
OK: 133 MiB in 148 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/10) Installing brotli-libs (1.1.0-r2)
(2/10) Installing c-ares (1.34.5-r0)
(3/10) Installing nghttp2-libs (1.65.0-r0)
(4/10) Installing libpsl (0.21.5-r3)
(5/10) Installing libcurl (8.14.1-r2)
(6/10) Installing pcre2 (10.46-r0)
(7/10) Installing git (2.49.1-r0)
(8/10) Installing git-init-template (2.49.1-r0)
(9/10) Installing gnu-libiconv-libs (1.17-r2)
(10/10) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.37.0-r20.trigger
OK: 143 MiB in 158 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/nncmpp.git nncmpp
Cloning into 'nncmpp'...
remote: Enumerating objects: 1141, done.
remote: Counting objects: 100% (435/435), done.
remote: Compressing objects: 100% (433/433), done.
remote: Total 1141 (delta 282), reused 0 (delta 0), pack-reused 706 (from 1)
Receiving objects: 100% (1141/1141), 808.13 KiB | 19.24 MiB/s, done.
Resolving deltas: 100% (734/734), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Submodule 'termo' (https://git.janouch.name/p/termo.git) registered for path 'termo'
Cloning into '/home/ci/nncmpp/liberty'...
remote: Enumerating objects: 903, done.
remote: Counting objects: 100% (372/372), done.
remote: Compressing objects: 100% (369/369), done.
remote: Total 903 (delta 235), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (903/903), 438.50 KiB | 15.12 MiB/s, done.
Resolving deltas: 100% (556/556), done.
Cloning into '/home/ci/nncmpp/termo'...
remote: Enumerating objects: 1977, done.
remote: Counting objects: 100% (38/38), done.
remote: Compressing objects: 100% (37/37), done.
remote: Total 1977 (delta 14), reused 0 (delta 0), pack-reused 1939 (from 1)
Receiving objects: 100% (1977/1977), 1.38 MiB | 22.43 MiB/s, done.
Resolving deltas: 100% (1259/1259), done.
Submodule path 'liberty': checked out 'c0eda1c23fe35e5fcd345874fc27a20ac31352f2'
Submodule path 'termo': checked out 'f9a102456fa6a0b43a916ceaf031f21ea5665e6e'
+ cd nncmpp
+ git -c 'advice.detachedHead=false' checkout 6aa822fe34510780d9dffbee8e847fc951d9096c
HEAD is now at 6aa822f Update .gitignore for newer Qt Creator
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=2.1.1-16-g6aa822f
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/2.1.1-16-g6aa822f/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake asciidoctor rsvg-convert libunistring-dev ncurses-dev curl-dev fftw-dev pulseaudio-dev libx11-dev libxft-dev libpng-dev
(1/132) Installing ruby-libs (3.4.4-r0)
(2/132) Installing libucontext (1.3.2-r0)
(3/132) Installing ruby (3.4.4-r0)
(4/132) Installing asciidoctor (2.0.23-r1)
(5/132) Installing jansson (2.14.1-r0)
(6/132) Installing binutils (2.44-r3)
(7/132) Installing libmagic (5.46-r2)
(8/132) Installing file (5.46-r2)
(9/132) Installing libgomp (14.2.0-r6)
(10/132) Installing libatomic (14.2.0-r6)
(11/132) Installing isl26 (0.26-r1)
(12/132) Installing mpfr4 (4.2.1_p1-r0)
(13/132) Installing mpc1 (1.3.1-r1)
(14/132) Installing gcc (14.2.0-r6)
(15/132) Installing libstdc++-dev (14.2.0-r6)
(16/132) Installing musl-dev (1.2.5-r10)
(17/132) Installing g++ (14.2.0-r6)
(18/132) Installing make (4.4.1-r3)
(19/132) Installing fortify-headers (1.1-r5)
(20/132) Installing patch (2.8-r0)
(21/132) Installing build-base (0.5-r3)
(22/132) Installing acl-libs (2.3.2-r1)
(23/132) Installing lz4-libs (1.10.0-r0)
(24/132) Installing libarchive (3.8.3-r0)
(25/132) Installing rhash-libs (1.4.5-r0)
(26/132) Installing libuv (1.51.0-r0)
(27/132) Installing cmake (3.31.7-r1)
(28/132) Installing brotli (1.1.0-r2)
(29/132) Installing pkgconf (2.4.3-r0)
(30/132) Installing brotli-dev (1.1.0-r2)
(31/132) Installing c-ares-dev (1.34.5-r0)
(32/132) Installing libidn2-dev (2.3.7-r0)
(33/132) Installing libpsl-utils (0.21.5-r3)
(34/132) Installing libpsl-dev (0.21.5-r3)
(35/132) Installing nghttp2-dev (1.65.0-r0)
(36/132) Installing openssl-dev (3.5.4-r0)
(37/132) Installing zlib-dev (1.3.1-r2)
(38/132) Installing zstd (1.5.7-r0)
(39/132) Installing zstd-dev (1.5.7-r0)
(40/132) Installing curl-dev (8.14.1-r2)
(41/132) Installing fftw-double-libs (3.3.10-r6)
(42/132) Installing fftw-long-double-libs (3.3.10-r6)
(43/132) Installing fftw-single-libs (3.3.10-r6)
(44/132) Installing fftw-dev (3.3.10-r6)
(45/132) Installing libpng (1.6.51-r0)
(46/132) Installing libpng-dev (1.6.51-r0)
(47/132) Installing libunistring-dev (1.3-r0)
(48/132) Installing libxau (1.0.12-r0)
(49/132) Installing xorgproto (2024.1-r0)
(50/132) Installing libxau-dev (1.0.12-r0)
(51/132) Installing xcb-proto (1.17.0-r0)
(52/132) Installing xcb-proto-pyc (1.17.0-r0)
(53/132) Installing libxdmcp (1.1.5-r1)
(54/132) Installing libxcb (1.17.0-r0)
(55/132) Installing libxdmcp-dev (1.1.5-r1)
(56/132) Installing libxcb-dev (1.17.0-r0)
(57/132) Installing xtrans (1.5.2-r0)
(58/132) Installing libx11 (1.8.11-r0)
(59/132) Installing libx11-dev (1.8.11-r0)
(60/132) Installing libxrender (0.9.12-r0)
(61/132) Installing freetype (2.13.3-r0)
(62/132) Installing fontconfig (2.15.0-r3)
(63/132) Installing libxft (2.3.8-r3)
(64/132) Installing expat (2.7.3-r0)
(65/132) Installing expat-dev (2.7.3-r0)
(66/132) Installing bzip2-dev (1.0.8-r6)
(67/132) Installing freetype-dev (2.13.3-r0)
(68/132) Installing fontconfig-dev (2.15.0-r3)
(69/132) Installing libxrender-dev (0.9.12-r0)
(70/132) Installing libxft-dev (2.3.8-r3)
(71/132) Installing libformw (6.5_p20250503-r0)
(72/132) Installing libmenuw (6.5_p20250503-r0)
(73/132) Installing libncurses++ (6.5_p20250503-r0)
(74/132) Installing ncurses-dev (6.5_p20250503-r0)
(75/132) Installing libintl (0.24.1-r0)
(76/132) Installing glib (2.84.4-r0)
(77/132) Installing libasyncns (0.8-r4)
(78/132) Installing dbus-libs (1.16.2-r1)
(79/132) Installing libltdl (2.5.4-r1)
(80/132) Installing orc (0.4.40-r1)
(81/132) Installing libogg (1.3.5-r5)
(82/132) Installing libflac (1.4.3-r1)
(83/132) Installing alsa-lib (1.2.14-r0)
(84/132) Installing lame-libs (3.100-r5)
(85/132) Installing mpg123-libs (1.32.10-r0)
(86/132) Installing opus (1.5.2-r1)
(87/132) Installing libvorbis (1.3.7-r2)
(88/132) Installing libsndfile (1.2.2-r2)
(89/132) Installing soxr (0.1.3-r7)
(90/132) Installing speexdsp (1.2.1-r2)
(91/132) Installing tdb-libs (1.4.12-r0)
(92/132) Installing libpulse (17.0-r5)
(93/132) Installing libpulse-mainloop-glib (17.0-r5)
(94/132) Installing libxml2 (2.13.9-r0)
(95/132) Installing libxml2-utils (2.13.9-r0)
(96/132) Installing docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.post-install
(97/132) Installing libxslt (1.1.43-r3)
(98/132) Installing docbook-xsl-ns (1.79.2-r11)
Executing docbook-xsl-ns-1.79.2-r11.post-install
(99/132) Installing docbook-xsl-nons (1.79.2-r11)
Executing docbook-xsl-nons-1.79.2-r11.post-install
(100/132) Installing docbook-xsl (1.79.2-r11)
(101/132) Installing xz (5.8.1-r0)
(102/132) Installing gettext-asprintf (0.24.1-r0)
(103/132) Installing gettext-libs (0.24.1-r0)
(104/132) Installing gettext-envsubst (0.24.1-r0)
(105/132) Installing gettext (0.24.1-r0)
(106/132) Installing gettext-dev (0.24.1-r0)
(107/132) Installing py3-parsing (3.2.3-r0)
(108/132) Installing py3-parsing-pyc (3.2.3-r0)
(109/132) Installing py3-packaging (25.0-r0)
(110/132) Installing py3-packaging-pyc (25.0-r0)
(111/132) Installing linux-headers (6.14.2-r0)
(112/132) Installing libffi-dev (3.4.8-r0)
(113/132) Installing bsd-compat-headers (0.7.2-r6)
(114/132) Installing libedit-dev (20250104.3.1-r1)
(115/132) Installing libpcre2-16 (10.46-r0)
(116/132) Installing libpcre2-32 (10.46-r0)
(117/132) Installing pcre2-dev (10.46-r0)
(118/132) Installing liblastlog2 (2.41-r9)
(119/132) Installing sqlite (3.49.2-r1)
(120/132) Installing sqlite-dev (3.49.2-r1)
(121/132) Installing util-linux-dev (2.41-r9)
(122/132) Installing glib-dev (2.84.4-r0)
(123/132) Installing pulseaudio-dev (17.0-r5)
(124/132) Installing libxext (1.3.6-r2)
(125/132) Installing pixman (0.46.4-r0)
(126/132) Installing cairo (1.18.4-r0)
(127/132) Installing libdav1d (1.5.1-r0)
(128/132) Installing fribidi (1.0.16-r1)
(129/132) Installing graphite2 (1.3.14-r6)
(130/132) Installing harfbuzz (11.2.1-r0)
(131/132) Installing pango (1.56.3-r0)
(132/132) Installing rsvg-convert (2.60.0-r0)
Executing busybox-1.37.0-r20.trigger
Executing glib-2.84.4-r0.trigger
No schema files found: doing nothing.
OK: 563 MiB in 290 packages
+ cmake -B build '-DBUILD_TESTING=ON'
-- The C compiler identification is GNU 14.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.4.3")
-- Found Ncursesw: ncursesw
-- Found Unistring: /usr/include
-- Checking for module 'libcurl'
-- Found libcurl, version 8.14.1
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found Curses: /usr/lib/libcurses.so
-- Checking for modules 'glib-2.0;gio-2.0'
-- Found glib-2.0, version 2.84.4
-- Found gio-2.0, version 2.84.4
-- Checking for module 'unibilium>=0.1.0'
-- Package 'unibilium' not found
-- Checking for modules 'fftw3;fftw3f'
-- Found fftw3, version 3.3.10
-- Found fftw3f, version 3.3.10
-- Checking for module 'libpulse'
-- Found libpulse, version 17.0
-- Checking for modules 'x11;xrender;xft;fontconfig;libpng'
-- Found x11, version 1.8.11
-- Found xrender, version 0.9.12
-- Found xft, version 2.3.8
-- Found fontconfig, version 2.15.0
-- Found libpng, version 1.6.51
-- Looking for resizeterm
-- Looking for resizeterm - found
-- Configuring done (0.8s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/nncmpp/build
+ cmake --build build -- package
[ 9%] Building C object termo/CMakeFiles/termo-static.dir/termo.c.o
[ 18%] Building C object termo/CMakeFiles/termo-static.dir/driver-csi.c.o
[ 27%] Building C object termo/CMakeFiles/termo-static.dir/driver-ti.c.o
[ 36%] Linking C static library libtermo-0.a
[ 36%] Built target termo-static
[ 45%] Generating nncmpp-actions.h
[ 54%] Building C object CMakeFiles/nncmpp.dir/nncmpp.c.o
[ 63%] Linking C executable nncmpp
[ 63%] Built target nncmpp
[ 72%] Generating nncmpp 16x16 application icon
[ 81%] Generating nncmpp 32x32 application icon
[ 90%] Generating nncmpp 48x48 application icon
[ 90%] Built target icons
[100%] Generating man page for nncmpp
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: nncmpp
CPack: - Install project: nncmpp []
CPack: Create package
CPack: - package: /home/ci/nncmpp/build/nncmpp-2.1.1-16-g6aa822f-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: nncmpp
CPack: - Install project: nncmpp []
CPack: Create package
CPack: - package: /home/ci/nncmpp/build/nncmpp-2.1.1-16-g6aa822f-Linux-x86_64.zip generated.
+ cmake --build build -- test
Running tests...
gmake[1]: Entering directory '/home/ci/nncmpp/build/termo'
[ 1%] Building C object termo/CMakeFiles/termo.dir/termo.c.o
[ 3%] Building C object termo/CMakeFiles/termo.dir/driver-csi.c.o
[ 5%] Building C object termo/CMakeFiles/termo.dir/driver-ti.c.o
[ 7%] Linking C shared library libtermo-0.so
[ 7%] Built target termo
[ 14%] Built target termo-static
[ 16%] Building C object termo/CMakeFiles/test-01base.dir/tests/01base.c.o
[ 17%] Building C object termo/CMakeFiles/test-01base.dir/tests/taplib.c.o
[ 19%] Linking C executable test-01base
[ 19%] Built target test-01base
[ 21%] Building C object termo/CMakeFiles/test-02getkey.dir/tests/02getkey.c.o
[ 23%] Building C object termo/CMakeFiles/test-02getkey.dir/tests/taplib.c.o
[ 25%] Linking C executable test-02getkey
[ 25%] Built target test-02getkey
[ 26%] Building C object termo/CMakeFiles/test-03utf8.dir/tests/03utf8.c.o
[ 28%] Building C object termo/CMakeFiles/test-03utf8.dir/tests/taplib.c.o
[ 30%] Linking C executable test-03utf8
[ 30%] Built target test-03utf8
[ 32%] Building C object termo/CMakeFiles/test-04flags.dir/tests/04flags.c.o
[ 33%] Building C object termo/CMakeFiles/test-04flags.dir/tests/taplib.c.o
[ 35%] Linking C executable test-04flags
[ 35%] Built target test-04flags
[ 37%] Building C object termo/CMakeFiles/test-05read.dir/tests/05read.c.o
[ 39%] Building C object termo/CMakeFiles/test-05read.dir/tests/taplib.c.o
[ 41%] Linking C executable test-05read
[ 41%] Built target test-05read
[ 42%] Building C object termo/CMakeFiles/test-06buffer.dir/tests/06buffer.c.o
[ 44%] Building C object termo/CMakeFiles/test-06buffer.dir/tests/taplib.c.o
[ 46%] Linking C executable test-06buffer
[ 46%] Built target test-06buffer
[ 48%] Building C object termo/CMakeFiles/test-10keyname.dir/tests/10keyname.c.o
[ 50%] Building C object termo/CMakeFiles/test-10keyname.dir/tests/taplib.c.o
[ 51%] Linking C executable test-10keyname
[ 51%] Built target test-10keyname
[ 53%] Building C object termo/CMakeFiles/test-11strfkey.dir/tests/11strfkey.c.o
[ 55%] Building C object termo/CMakeFiles/test-11strfkey.dir/tests/taplib.c.o
[ 57%] Linking C executable test-11strfkey
[ 57%] Built target test-11strfkey
[ 58%] Building C object termo/CMakeFiles/test-12strpkey.dir/tests/12strpkey.c.o
[ 60%] Building C object termo/CMakeFiles/test-12strpkey.dir/tests/taplib.c.o
[ 62%] Linking C executable test-12strpkey
[ 62%] Built target test-12strpkey
[ 64%] Building C object termo/CMakeFiles/test-13cmpkey.dir/tests/13cmpkey.c.o
[ 66%] Building C object termo/CMakeFiles/test-13cmpkey.dir/tests/taplib.c.o
[ 67%] Linking C executable test-13cmpkey
[ 67%] Built target test-13cmpkey
[ 69%] Building C object termo/CMakeFiles/test-20canon.dir/tests/20canon.c.o
[ 71%] Building C object termo/CMakeFiles/test-20canon.dir/tests/taplib.c.o
[ 73%] Linking C executable test-20canon
[ 73%] Built target test-20canon
[ 75%] Building C object termo/CMakeFiles/test-30mouse.dir/tests/30mouse.c.o
[ 76%] Building C object termo/CMakeFiles/test-30mouse.dir/tests/taplib.c.o
[ 78%] Linking C executable test-30mouse
[ 78%] Built target test-30mouse
[ 80%] Building C object termo/CMakeFiles/test-31position.dir/tests/31position.c.o
[ 82%] Building C object termo/CMakeFiles/test-31position.dir/tests/taplib.c.o
[ 83%] Linking C executable test-31position
[ 83%] Built target test-31position
[ 85%] Building C object termo/CMakeFiles/test-32modereport.dir/tests/32modereport.c.o
[ 87%] Building C object termo/CMakeFiles/test-32modereport.dir/tests/taplib.c.o
[ 89%] Linking C executable test-32modereport
[ 89%] Built target test-32modereport
[ 91%] Building C object termo/CMakeFiles/test-33focus.dir/tests/33focus.c.o
[ 92%] Building C object termo/CMakeFiles/test-33focus.dir/tests/taplib.c.o
[ 94%] Linking C executable test-33focus
[ 94%] Built target test-33focus
[ 96%] Building C object termo/CMakeFiles/test-39csi.dir/tests/39csi.c.o
[ 98%] Building C object termo/CMakeFiles/test-39csi.dir/tests/taplib.c.o
[100%] Linking C executable test-39csi
[100%] Built target test-39csi
gmake[1]: Leaving directory '/home/ci/nncmpp/build/termo'
Test project /home/ci/nncmpp/build
Start 1: test-xmlwf-nncmpp.svg
1/18 Test #1: test-xmlwf-nncmpp.svg ............ Passed 0.00 sec
Start 2: test-xmllint-nncmpp.svg
2/18 Test #2: test-xmllint-nncmpp.svg .......... Passed 0.00 sec
Start 3: termo.01base
3/18 Test #3: termo.01base ..................... Passed 0.00 sec
Start 4: termo.02getkey
4/18 Test #4: termo.02getkey ................... Passed 0.00 sec
Start 5: termo.03utf8
5/18 Test #5: termo.03utf8 ..................... Passed 0.00 sec
Start 6: termo.04flags
6/18 Test #6: termo.04flags .................... Passed 0.00 sec
Start 7: termo.05read
7/18 Test #7: termo.05read ..................... Passed 0.00 sec
Start 8: termo.06buffer
8/18 Test #8: termo.06buffer ................... Passed 0.00 sec
Start 9: termo.10keyname
9/18 Test #9: termo.10keyname .................. Passed 0.00 sec
Start 10: termo.11strfkey
10/18 Test #10: termo.11strfkey .................. Passed 0.00 sec
Start 11: termo.12strpkey
11/18 Test #11: termo.12strpkey .................. Passed 0.00 sec
Start 12: termo.13cmpkey
12/18 Test #12: termo.13cmpkey ................... Passed 0.00 sec
Start 13: termo.20canon
13/18 Test #13: termo.20canon .................... Passed 0.00 sec
Start 14: termo.30mouse
14/18 Test #14: termo.30mouse .................... Passed 0.00 sec
Start 15: termo.31position
15/18 Test #15: termo.31position ................. Passed 0.00 sec
Start 16: termo.32modereport
16/18 Test #16: termo.32modereport ............... Passed 0.00 sec
Start 17: termo.33focus
17/18 Test #17: termo.33focus .................... Passed 0.00 sec
Start 18: termo.39csi
18/18 Test #18: termo.39csi ...................... Passed 0.00 sec
100% tests passed, 0 tests failed out of 18
Total Test time (real) = 0.02 sec
Deploy log