- Project
- p/xK
- Commit
- a9b46141a991b3c3dba31beb262bf204537049d2
- Runner
- Alpine 3.19
- State
- Success
- Notified
- 1
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.19.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7l[2J[0mSeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
[2Je%@)0(B[0;37;40m[?25l[2J[23;16HAlpine will be booted automatically in [0;1m1[0m seconds[23;16H[0;37;40mAlpine will be booted automatically in [0;1;37;40m1[0;37;40m seconds..[23;16H [23;16H[0;37;40m [?25h[24;1H[0m
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
c[?7l[2J[ 0.000000] Linux version 6.6.14-0-virt (buildozer@build-3-19-x86_64) (gcc (Alpine 13.2.1_git20231014) 13.2.1 20231014, GNU ld (GNU Binutils) 2.41) #1-Alpine SMP PREEMPT_DYNAMIC Fri, 26 Jan 2024 11:08:07 +0000
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 1565556651 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000008] tsc: Detected 1696.074 MHz processor
[ 0.001090] last_pfn = 0x7ffda max_arch_pfn = 0x400000000
[ 0.001127] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001131] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001448] RAMDISK: [mem 0x7f6f7000-0x7ffd9fff]
[ 0.001452] ACPI: Early table checksum verification disabled
[ 0.001457] ACPI: RSDP 0x00000000000F6520 000014 (v00 BOCHS )
[ 0.001464] ACPI: RSDT 0x000000007FFE1CA7 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001474] ACPI: FACP 0x000000007FFE1B53 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001483] ACPI: DSDT 0x000000007FFE0040 001B13 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001489] ACPI: FACS 0x000000007FFE0000 000040
[ 0.001495] ACPI: APIC 0x000000007FFE1BC7 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001501] ACPI: HPET 0x000000007FFE1C47 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001506] ACPI: WAET 0x000000007FFE1C7F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.001511] ACPI: Reserving FACP table memory at [mem 0x7ffe1b53-0x7ffe1bc6]
[ 0.001513] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe1b52]
[ 0.001515] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[ 0.001516] ACPI: Reserving APIC table memory at [mem 0x7ffe1bc7-0x7ffe1c46]
[ 0.001517] ACPI: Reserving HPET table memory at [mem 0x7ffe1c47-0x7ffe1c7e]
[ 0.001518] ACPI: Reserving WAET table memory at [mem 0x7ffe1c7f-0x7ffe1ca6]
[ 0.002003] Zone ranges:
[ 0.002005] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.002009] DMA32 [mem 0x0000000001000000-0x000000007ffd9fff]
[ 0.002011] Normal empty
[ 0.002013] Movable zone start for each node
[ 0.002013] Early memory node ranges
[ 0.002014] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.002017] node 0: [mem 0x0000000000100000-0x000000007ffd9fff]
[ 0.002019] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffd9fff]
[ 0.002404] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.002433] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.012260] On node 0, zone DMA32: 38 pages in unavailable ranges
[ 0.012938] ACPI: PM-Timer IO Port: 0x608
[ 0.012958] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.013019] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.013025] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.013028] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.013030] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.013032] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.013034] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.013041] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.013044] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.013051] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.013076] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.013098] [mem 0x80000000-0xfeffbfff] available for PCI devices
[ 0.013101] Booting paravirtualized kernel on KVM
[ 0.013103] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.019870] setup_percpu: NR_CPUS:256 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.020498] percpu: Embedded 57 pages/cpu s195048 r8192 d30232 u1048576
[ 0.020545] kvm-guest: PV spinlocks disabled, no host support
[ 0.020546] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 initrd=initramfs-virt
[ 0.020630] Unknown kernel command line parameters "BOOT_IMAGE=vmlinuz-virt modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.021201] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.021686] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.021785] Built 1 zonelists, mobility grouping on. Total pages: 515802
[ 0.022425] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.028979] Memory: 2017148K/2096608K available (12288K kernel code, 1744K rwdata, 8008K rodata, 2636K init, 2300K bss, 79200K reserved, 0K cma-reserved)
[ 0.039948] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.040098] Kernel/User page tables isolation: enabled
[ 0.041322] Dynamic Preempt: none
[ 0.041467] rcu: Preemptible hierarchical RCU implementation.
[ 0.041468] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.041470] Trampoline variant of Tasks RCU enabled.
[ 0.041471] Tracing variant of Tasks RCU enabled.
[ 0.041472] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.041474] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.046427] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.046673] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.046868] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.054713] Console: colour VGA+ 80x25
[ 0.054774] printk: console [ttyS0] enabled
[ 0.201727] ACPI: Core revision 20230628
[ 0.203258] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.205738] APIC: Switch to symmetric I/O mode setup
[ 0.207414] x2apic enabled
[ 0.208636] APIC: Switched APIC routing to: physical x2apic
[ 0.211703] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.213167] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.215596] Calibrating delay loop (skipped) preset value.. 3392.14 BogoMIPS (lpj=16960740)
[ 0.225702] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.227049] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.228571] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.230703] Spectre V2 : Mitigation: Retpolines
[ 0.231864] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.235597] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.237293] Speculative Store Bypass: Vulnerable
[ 0.238465] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.240116] MMIO Stale Data: Unknown: No mitigations
[ 0.241378] x86/fpu: x87 FPU will use FXSAVE
[ 0.264626] Freeing SMP alternatives memory: 32K
[ 0.265599] pid_max: default: 32768 minimum: 301
[ 0.267735] LSM: initializing lsm=capability,landlock,lockdown,integrity
[ 0.271025] landlock: Up and running.
[ 0.272218] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.274095] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.397475] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.400175] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.402013] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.403974] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.405592] signal: max sigframe size: 1440
[ 0.405664] rcu: Hierarchical SRCU implementation.
[ 0.406892] rcu: Max phase no-delay instances is 1000.
[ 0.408622] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.410212] smp: Bringing up secondary CPUs ...
[ 0.411559] smpboot: x86: Booting SMP configuration:
[ 0.412835] .... node #0, CPUs: #1
[ 0.425670] smp: Brought up 1 node, 2 CPUs
[ 0.427730] smpboot: Max logical packages: 1
[ 0.428835] ----------------
[ 0.429574] | NMI testsuite:
[ 0.430315] --------------------
[ 0.431147] remote IPI: ok |
[ 0.431185] local IPI: ok |
[ 0.431185] --------------------
[ 0.431185] Good, all 2 testcases passed! |
[ 0.431185] ---------------------------------
[ 0.435599] smpboot: Total of 2 processors activated (6784.29 BogoMIPS)
[ 0.437689] devtmpfs: initialized
[ 0.437689] x86/mm: Memory block size: 128MB
[ 0.438031] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.438202] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.447246] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.448833] audit: initializing netlink subsys (disabled)
[ 0.450142] audit: type=2000 audit(1712750399.673:1): state=initialized audit_enabled=0 res=1
[ 0.450142] thermal_sys: Registered thermal governor 'step_wise'
[ 0.450142] cpuidle: using governor ladder
[ 0.455615] cpuidle: using governor menu
[ 0.456702] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.458245] PCI: Using configuration type 1 for base access
[ 0.460229] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.470944] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.470944] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.475645] ACPI: Added _OSI(Module Device)
[ 0.476765] ACPI: Added _OSI(Processor Device)
[ 0.477892] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.479096] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.481316] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.484236] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.485769] ACPI: Interpreter enabled
[ 0.486728] ACPI: PM: (supports S0 S3 S5)
[ 0.487751] ACPI: Using IOAPIC for interrupt routing
[ 0.489047] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.491354] PCI: Using E820 reservations for host bridge windows
[ 0.493010] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.497781] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.499243] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.501039] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.503294] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.506132] acpiphp: Slot [3] registered
[ 0.507072] acpiphp: Slot [4] registered
[ 0.508010] acpiphp: Slot [5] registered
[ 0.508966] acpiphp: Slot [6] registered
[ 0.509899] acpiphp: Slot [7] registered
[ 0.510832] acpiphp: Slot [8] registered
[ 0.511793] acpiphp: Slot [9] registered
[ 0.512801] acpiphp: Slot [10] registered
[ 0.513755] acpiphp: Slot [11] registered
[ 0.514720] acpiphp: Slot [12] registered
[ 0.515628] acpiphp: Slot [13] registered
[ 0.516629] acpiphp: Slot [14] registered
[ 0.517588] acpiphp: Slot [15] registered
[ 0.518560] acpiphp: Slot [16] registered
[ 0.519563] acpiphp: Slot [17] registered
[ 0.520845] acpiphp: Slot [18] registered
[ 0.522156] acpiphp: Slot [19] registered
[ 0.523442] acpiphp: Slot [20] registered
[ 0.524675] acpiphp: Slot [21] registered
[ 0.525628] acpiphp: Slot [22] registered
[ 0.526608] acpiphp: Slot [23] registered
[ 0.527562] acpiphp: Slot [24] registered
[ 0.528542] acpiphp: Slot [25] registered
[ 0.529496] acpiphp: Slot [26] registered
[ 0.530449] acpiphp: Slot [27] registered
[ 0.531450] acpiphp: Slot [28] registered
[ 0.532743] acpiphp: Slot [29] registered
[ 0.534067] acpiphp: Slot [30] registered
[ 0.535629] acpiphp: Slot [31] registered
[ 0.536958] PCI host bridge to bus 0000:00
[ 0.538299] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.540478] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.542661] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.545073] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.545596] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]
[ 0.548064] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.549919] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.552531] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.556506] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.562179] pci 0000:00:01.1: reg 0x20: [io 0xc120-0xc12f]
[ 0.566394] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.568703] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.570799] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.573106] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.575530] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.576286] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.578632] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.581275] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.586438] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.595664] pci 0000:00:02.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff]
[ 0.603245] pci 0000:00:02.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.605782] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.609715] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.613010] pci 0000:00:03.0: reg 0x10: [io 0xc100-0xc11f]
[ 0.616280] pci 0000:00:03.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[ 0.623199] pci 0000:00:03.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.627924] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.632900] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.636594] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.639461] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[ 0.646983] pci 0000:00:04.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.653571] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.656365] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0ff]
[ 0.660118] pci 0000:00:05.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[ 0.669183] pci 0000:00:05.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref]
[ 0.678376] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.680990] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.685767] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.687346] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.688847] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.690765] iommu: Default domain type: Translated
[ 0.691904] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.693583] SCSI subsystem initialized
[ 0.694516] pps_core: LinuxPPS API ver. 1 registered
[ 0.695597] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.697714] PTP clock support registered
[ 0.698672] PCI: Using ACPI for IRQ routing
[ 0.698672] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.698672] clocksource: Switched to clocksource kvm-clock
[ 0.701582] VFS: Disk quotas dquot_6.6.0
[ 0.702618] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.704344] pnp: PnP ACPI init
[ 0.705556] pnp: PnP ACPI: found 6 devices
[ 0.716267] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.718537] NET: Registered PF_INET protocol family
[ 0.719811] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.722811] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.724833] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.726774] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.728701] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.730550] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.732512] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.734079] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.735877] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.737662] NET: Registered PF_XDP protocol family
[ 0.739315] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.740920] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.742500] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.744246] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.746014] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]
[ 0.747903] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.749408] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.751031] PCI: CLS 0 bytes, default 64
[ 0.752110] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1872aa7eed8, max_idle_ns: 440795242723 ns
[ 0.752187] Unpacking initramfs...
[ 0.755012] Initialise system trusted keyrings
[ 0.757138] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.759155] zbud: loaded
[ 0.760157] Key type asymmetric registered
[ 0.761517] Asymmetric key parser 'x509' registered
[ 0.763143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.765941] io scheduler mq-deadline registered
[ 0.767424] io scheduler kyber registered
[ 0.768814] io scheduler bfq registered
[ 0.779210] ERST DBG: ERST support is disabled.
[ 0.804907] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.832237] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.862332] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.868253] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.870614] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.874570] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.877830] scsi host0: ata_piix
[ 0.879385] scsi host1: ata_piix
[ 0.880233] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 0.881883] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 0.883587] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.887035] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.888341] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.889709] rtc_cmos 00:05: RTC can wake from S4
[ 0.891534] Freeing initrd memory: 9100K
[ 0.892301] rtc_cmos 00:05: registered as rtc0
[ 0.894185] rtc_cmos 00:05: setting system clock to 2024-04-10T11:59:59 UTC (1712750399)
[ 0.896451] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.898466] intel_pstate: CPU model not supported
[ 0.899852] gre: GRE over IPv4 demultiplexor driver
[ 0.916485] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.921712] Key type dns_resolver registered
[ 0.922975] IPI shorthand broadcast: enabled
[ 0.926661] sched_clock: Marking stable (762778721, 158908100)->(921152742, 534079)
[ 0.935951] registered taskstats version 1
[ 0.937247] Loading compiled-in X.509 certificates
[ 0.946708] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.951858] Key type .fscrypt registered
[ 0.953242] Key type fscrypt-provisioning registered
[ 1.049448] ata2: found unknown device (class 0)
[ 1.051129] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.053870] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.090739] Freeing unused kernel image (initmem) memory: 2636K
[ 1.129135] Write protecting the kernel read-only data: 20480k
[ 1.130907] Freeing unused kernel image (rodata/data gap) memory: 184K
[ 1.132631] rodata_test: all tests were successful
[ 1.133874] Run /init as init process
[ 1.149521] Alpine Init 3.9.1-r0
Alpine Init 3.9.1-r0
[ 1.151413] Loading boot drivers...
* Loading boot drivers: [ 1.207910] ACPI: bus type USB registered
[ 1.208886] usbcore: registered new interface driver usbfs
[ 1.210179] usbcore: registered new interface driver hub
[ 1.211364] usbcore: registered new device driver usb
[ 1.218883] usbcore: registered new interface driver usb-storage
[ 1.385032] loop: module loaded
[ 1.432190] ACPI: bus type drm_connector registered
[ 1.471476] Loading boot drivers: ok.
ok.
[ 1.474957] Mounting root...
* Mounting root: [ 1.508328] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.531754] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.532616] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.536000] [drm] Found EDID data blob.
[ 1.537263] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[ 1.552561] Console: switching to colour frame buffer device 160x50
[ 1.555088] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.670181] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.671922] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.759434] virtio_blk virtio1: 2/0/0 default/read/poll queues
[ 1.761978] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.767601] virtio_blk virtio2: 2/0/0 default/read/poll queues
[ 1.770561] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.931871] block sr0: the capability attribute has been deprecated.
[ 4.873814] EXT4-fs (vda): mounted filesystem 82b97a91-8270-4580-9e13-82ce10d47555 ro with ordered data mode. Quota mode: none.
[ 4.876813] Mounting root: ok.
ok.
OpenRC 0.52.1 is starting up Linux 6.6.14-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 6031/46000 files, 165032/184320 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Migrating /var/lock to /run/lock ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
Cloud-init v. 23.4 running 'init-local' at Wed, 10 Apr 2024 12:00:09 +0000. Up 10.59 seconds.
[ ok ]
* Setting hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ... [ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
Cloud-init v. 23.4 running 'init' at Wed, 10 Apr 2024 12:00:21 +0000. Up 22.57 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::5054:ff:fe12:3456/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
2024-04-10 12:00:21,353 - log.py[DEPRECATED]: Deprecated cloud-config provided:
chpasswd.list: List of ``username:password`` pairs. Each user will have the corresponding password set. A password can be randomly generated by specifying ``RANDOM`` or ``R`` as a user's password. A hashed password, created by a tool like ``mkpasswd``, can be specified. A regex (``r'\$(1|2a|2y|5|6)(\$.+){2}'``) is used to determine if a password value should be treated as a hash. Deprecated in version 22.2. Use ``users`` instead.
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:v+NQqRFuuF5HCS8aa8C9ZzwVa0YMnaAtGhWrMzMdEOk root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| ooo.oo . |
| .o + oo |
| .. = + + |
| .E* = = = |
| X = S @ |
| * O @ |
| * O o |
| o + +.. |
| . .o. |
+----[SHA256]-----+
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub
The key fingerprint is:
SHA256:EdHnTZm5T4779EzsTeD0X4Ncv1st2Z/pACPVzRUu9yc root@alpine-ci
The key's randomart image is:
+---[DSA 1024]----+
| oo =o|
| .. o O .|
| . + = * |
| .. . = o|
| S. o E*o|
| . +o+B*|
| ++o%|
| oB%|
| .BX|
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:GpabM6iznU8bG9w54nPhYUlsmt0B+897tqM51VLLEeU root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| o|
| . o |
| . o E|
| .= . ..|
| +*S+ . .oo|
| +o**.o oo.|
| . %o+o o . . |
| .o +.Oo. +.+ |
| ooo.=o +*.o |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:w7NlO+pNW1xNa6xiYKjXyXNw+YGNPW0/EyQR7EUnAOA root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| ....o++..|
| . ..o.|
| E .....|
| .. *.=o.|
| .S+o= =.B.|
| . +*=o..* o|
| . ..=++oo o.|
| . +++. o|
| .o o |
+----[SHA256]-----+
[ ok ]
Cloud-init v. 23.4 running 'modules:config' at Wed, 10 Apr 2024 12:00:22 +0000. Up 24.24 seconds.
2024-04-10 12:00:22,925 - log.py[DEPRECATED]: Config key 'lists' is deprecated in 22.3 and scheduled to be removed in 27.3. Use 'users' instead.
2024-04-10 12:00:22,928 - log.py[DEPRECATED]: The chpasswd multiline string is deprecated in 22.2 and scheduled to be removed in 27.2. Use string type instead.
[ ok ]
Cloud-init v. 23.4 running 'modules:final' at Wed, 10 Apr 2024 12:00:23 +0000. Up 25.31 seconds.
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/community/x86_64/APKINDEX.tar.gz
(1/1) Installing ca-certificates (20240226-r0)
Executing busybox-1.36.1-r15.trigger
Executing ca-certificates-20240226-r0.trigger
OK: 147 MiB in 152 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 1024 SHA256:EdHnTZm5T4779EzsTeD0X4Ncv1st2Z/pACPVzRUu9yc root@alpine-ci (DSA)
cloud-init: 256 SHA256:GpabM6iznU8bG9w54nPhYUlsmt0B+897tqM51VLLEeU root@alpine-ci (ECDSA)
cloud-init: 256 SHA256:w7NlO+pNW1xNa6xiYKjXyXNw+YGNPW0/EyQR7EUnAOA root@alpine-ci (ED25519)
cloud-init: 3072 SHA256:v+NQqRFuuF5HCS8aa8C9ZzwVa0YMnaAtGhWrMzMdEOk root@alpine-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBJlllJOSQTpgbk+DneXjC1iOdSRobtJi7H3SDzf0yD6NPSmqST2Ga7fTVvzqMAOnYVWGuXEoa54NC+gePRbJjuQ= root@alpine-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFfuKud+L0iaNw6fLBcLgadtwmajeYFc8juKeQU3QR7w root@alpine-ci
ssh-rsa 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 root@alpine-ci
-----END SSH HOST KEY KEYS-----
Cloud-init v. 23.4 finished at Wed, 10 Apr 2024 12:00:26 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb][dsmode=net]. Up 27.65 seconds
[ ok ]
Welcome to Alpine Linux 3.19
Kernel 6.6.14-0-virt on an x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
........
status: done
+ doas apk upgrade --no-interactive
Upgrading critical system libraries and apk-tools:
(1/1) Upgrading apk-tools (2.14.0-r5 -> 2.14.3-r1)
Executing busybox-1.36.1-r15.trigger
Continuing the upgrade transaction with new apk-tools:
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/main/x86_64/APKINDEX.tar.gz
fetch https://dl-cdn.alpinelinux.org/alpine/v3.19/community/x86_64/APKINDEX.tar.gz
(1/17) Upgrading ca-certificates-bundle (20230506-r0 -> 20240226-r0)
(2/17) Upgrading libcrypto3 (3.1.4-r5 -> 3.1.4-r6)
(3/17) Upgrading libssl3 (3.1.4-r5 -> 3.1.4-r6)
(4/17) Upgrading gnutls (3.8.3-r0 -> 3.8.4-r0)
(5/17) Upgrading libexpat (2.5.0-r2 -> 2.6.2-r0)
(6/17) Upgrading python3 (3.11.6-r1 -> 3.11.8-r0)
(7/17) Upgrading python3-pycache-pyc0 (3.11.6-r1 -> 3.11.8-r0)
(8/17) Upgrading pyc (3.11.6-r1 -> 3.11.8-r0)
(9/17) Installing py3-netifaces (0.11.0-r2)
(10/17) Upgrading py3-certifi (2023.7.22-r0 -> 2024.2.2-r0)
(11/17) Upgrading py3-certifi-pyc (2023.7.22-r0 -> 2024.2.2-r0)
(12/17) Upgrading tzdata (2023d-r0 -> 2024a-r0)
(13/17) Upgrading cloud-init-pyc (23.4-r0 -> 23.4.4-r1)
(14/17) Upgrading python3-pyc (3.11.6-r1 -> 3.11.8-r0)
(15/17) Upgrading cloud-init (23.4-r0 -> 23.4.4-r1)
(16/17) Upgrading cloud-init-openrc (23.4-r0 -> 23.4.4-r1)
(17/17) Upgrading linux-virt (6.6.14-r0 -> 6.6.25-r0)
Executing busybox-1.36.1-r15.trigger
Executing ca-certificates-20240226-r0.trigger
Executing kmod-31-r2.trigger
Executing mkinitfs-3.9.1-r0.trigger
==> initramfs: creating /boot/initramfs-virt for 6.6.25-0-virt
Executing syslinux-6.04_pre1-r15.trigger
/boot is device /dev/vda
OK: 147 MiB in 153 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/8) Installing brotli-libs (1.1.0-r1)
(2/8) Installing c-ares (1.27.0-r0)
(3/8) Installing nghttp2-libs (1.58.0-r0)
(4/8) Installing libcurl (8.5.0-r0)
(5/8) Installing pcre2 (10.42-r2)
(6/8) Installing git (2.43.0-r0)
(7/8) Installing gnu-libiconv-libs (1.17-r2)
(8/8) Installing gnu-libiconv (1.17-r2)
Executing busybox-1.36.1-r15.trigger
OK: 157 MiB in 161 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/xK.git xK
Cloning into 'xK'...
remote: Enumerating objects: 5196, done.
remote: Counting objects: 100% (1153/1153), done.
remote: Compressing objects: 100% (1040/1040), done.
remote: Total 5196 (delta 711), reused 155 (delta 71), pack-reused 4043 (from 1)
Receiving objects: 100% (5196/5196), 2.03 MiB | 5.39 MiB/s, done.
Resolving deltas: 100% (3422/3422), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Cloning into '/home/ci/xK/liberty'...
remote: Enumerating objects: 741, done.
remote: Counting objects: 100% (210/210), done.
remote: Compressing objects: 100% (207/207), done.
remote: Total 741 (delta 123), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (741/741), 380.16 KiB | 5.94 MiB/s, done.
Resolving deltas: 100% (444/444), done.
Submodule path 'liberty': checked out 'f04cc2c61e1a00db4d1af1bb55ca7e20b9c3db23'
+ cd xK
+ git -c 'advice.detachedHead=false' checkout a9b46141a991b3c3dba31beb262bf204537049d2
HEAD is now at a9b4614 xS/xN: add test targets
+ doas apk add --no-interactive build-base cmake pkgconf asciidoctor openssl-dev libffi-dev readline-dev libedit-dev lua5.4-dev perl
(1/46) Installing ruby-libs (3.2.2-r1)
(2/46) Installing libucontext (1.2-r2)
(3/46) Installing ruby (3.2.2-r1)
(4/46) Installing asciidoctor (2.0.20-r0)
(5/46) Installing jansson (2.14-r4)
(6/46) Installing binutils (2.41-r0)
(7/46) Installing libmagic (5.45-r1)
(8/46) Installing file (5.45-r1)
(9/46) Installing libgomp (13.2.1_git20231014-r0)
(10/46) Installing libatomic (13.2.1_git20231014-r0)
(11/46) Installing isl26 (0.26-r1)
(12/46) Installing mpfr4 (4.2.1-r0)
(13/46) Installing mpc1 (1.3.1-r1)
(14/46) Installing gcc (13.2.1_git20231014-r0)
(15/46) Installing libstdc++-dev (13.2.1_git20231014-r0)
(16/46) Installing musl-dev (1.2.4_git20230717-r4)
(17/46) Installing libc-dev (0.7.2-r5)
(18/46) Installing g++ (13.2.1_git20231014-r0)
(19/46) Installing make (4.4.1-r2)
(20/46) Installing fortify-headers (1.1-r3)
(21/46) Installing patch (2.7.6-r10)
(22/46) Installing build-base (0.5-r3)
(23/46) Installing lz4-libs (1.9.4-r5)
(24/46) Installing libarchive (3.7.2-r1)
(25/46) Installing rhash-libs (1.4.4-r0)
(26/46) Installing libuv (1.47.0-r0)
(27/46) Installing cmake (3.27.8-r0)
(28/46) Installing bsd-compat-headers (0.7.2-r5)
(29/46) Installing libformw (6.4_p20231125-r0)
(30/46) Installing libmenuw (6.4_p20231125-r0)
(31/46) Installing libncurses++ (6.4_p20231125-r0)
(32/46) Installing pkgconf (2.1.0-r0)
(33/46) Installing ncurses-dev (6.4_p20231125-r0)
(34/46) Installing libedit-dev (20230828.3.1-r3)
(35/46) Installing linux-headers (6.5-r0)
(36/46) Installing libffi-dev (3.4.4-r3)
(37/46) Installing lua5.4-libs (5.4.6-r1)
(38/46) Installing lua5.4 (5.4.6-r1)
(39/46) Installing lua5.4-dev (5.4.6-r1)
(40/46) Installing openssl-dev (3.1.4-r6)
(41/46) Installing perl (5.38.2-r0)
(42/46) Installing perl-error (0.17029-r2)
(43/46) Installing perl-git (2.43.0-r0)
(44/46) Installing git-perl (2.43.0-r0)
(45/46) Installing libhistory (8.2.1-r2)
(46/46) Installing readline-dev (8.2.1-r2)
Executing busybox-1.36.1-r15.trigger
OK: 500 MiB in 207 packages
+ doas apk add --no-interactive mingw-w64-gcc i686-mingw-w64-gcc cmake make rsvg-convert icoutils sox
(1/68) Installing i686-mingw-w64-binutils (2.40-r2)
(2/68) Installing i686-mingw-w64-crt (11.0.1-r0)
(3/68) Installing i686-mingw-w64-headers (11.0.0-r1)
(4/68) Installing i686-mingw-w64-winpthreads (11.0.0-r2)
(5/68) Installing i686-mingw-w64-gcc (13.2.0-r2)
(6/68) Installing perl-http-date (6.06-r0)
(7/68) Installing perl-clone (0.46-r2)
(8/68) Installing perl-uri (5.21-r0)
(9/68) Installing perl-io-html (1.004-r1)
(10/68) Installing perl-encode-locale (1.05-r5)
(11/68) Installing perl-lwp-mediatypes (6.04-r3)
(12/68) Installing perl-http-message (6.45-r0)
(13/68) Installing perl-http-cookies (6.10-r1)
(14/68) Installing perl-http-cookiejar (0.014-r1)
(15/68) Installing perl-net-http (6.23-r1)
(16/68) Installing perl-html-tagset (3.20-r5)
(17/68) Installing perl-html-parser (3.81-r2)
(18/68) Installing perl-file-listing (6.16-r0)
(19/68) Installing perl-www-robotrules (6.02-r4)
(20/68) Installing perl-http-negotiate (6.01-r4)
(21/68) Installing perl-try-tiny (0.31-r2)
(22/68) Installing perl-libwww (6.72-r0)
(23/68) Installing libpng (1.6.40-r0)
(24/68) Installing icoutils (0.32.3-r3)
(25/68) Installing mingw-w64-binutils (2.40-r2)
(26/68) Installing mingw-w64-crt (11.0.1-r0)
(27/68) Installing mingw-w64-headers (11.0.0-r1)
(28/68) Installing mingw-w64-winpthreads (11.0.0-r2)
(29/68) Installing mingw-w64-gcc (13.2.0-r2)
(30/68) Installing libxau (1.0.11-r3)
(31/68) Installing libxdmcp (1.1.4-r3)
(32/68) Installing libxcb (1.16-r0)
(33/68) Installing libx11 (1.8.7-r0)
(34/68) Installing libxext (1.3.5-r3)
(35/68) Installing libxrender (0.9.11-r4)
(36/68) Installing freetype (2.13.2-r0)
(37/68) Installing fontconfig (2.14.2-r4)
(38/68) Installing pixman (0.42.2-r2)
(39/68) Installing cairo (1.18.0-r0)
(40/68) Installing libintl (0.22.3-r0)
(41/68) Installing glib (2.78.4-r0)
(42/68) Installing libxml2 (2.11.7-r0)
(43/68) Installing shared-mime-info (2.4-r0)
(44/68) Installing libjpeg-turbo (3.0.1-r0)
(45/68) Installing libsharpyuv (1.3.2-r0)
(46/68) Installing libwebp (1.3.2-r0)
(47/68) Installing tiff (4.6.0-r0)
(48/68) Installing gdk-pixbuf (2.42.10-r6)
(49/68) Installing libxft (2.3.8-r2)
(50/68) Installing fribidi (1.0.13-r0)
(51/68) Installing graphite2 (1.3.14-r6)
(52/68) Installing harfbuzz (8.3.0-r0)
(53/68) Installing pango (1.51.0-r0)
(54/68) Installing rsvg-convert (2.57.1-r0)
(55/68) Installing libogg (1.3.5-r5)
(56/68) Installing libflac (1.4.3-r1)
(57/68) Installing alsa-lib (1.2.10-r0)
(58/68) Installing libao (1.2.2-r2)
(59/68) Installing gsm (1.0.22-r3)
(60/68) Installing libid3tag (0.16.2-r2)
(61/68) Installing libltdl (2.4.7-r3)
(62/68) Installing libmad (0.15.1b-r9)
(63/68) Installing lame-libs (3.100-r5)
(64/68) Installing opus (1.4-r0)
(65/68) Installing opusfile (0.12-r6)
(66/68) Installing libvorbis (1.3.7-r2)
(67/68) Installing libsndfile (1.2.2-r0)
(68/68) Installing sox (14.4.2-r12)
Executing busybox-1.36.1-r15.trigger
Executing glib-2.78.4-r0.trigger
Executing shared-mime-info-2.4-r0.trigger
Executing gdk-pixbuf-2.42.10-r6.trigger
OK: 1314 MiB in 275 packages
+ doas apk add --no-interactive make go curl
(1/2) Installing curl (8.5.0-r0)
(2/2) Installing go (1.21.9-r0)
Executing busybox-1.36.1-r15.trigger
OK: 1490 MiB in 277 packages
+ cmake -B build
-- The C compiler identification is GNU 13.2.1
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Git: /usr/bin/git (found version "2.43.0")
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.1.0")
-- Checking for modules 'libssl;libcrypto'
-- Found libssl, version 3.1.4
-- Found libcrypto, version 3.1.4
-- Performing Test ICONV_ACCEPTS_TRANSLIT
-- Performing Test ICONV_ACCEPTS_TRANSLIT - Failed
-- Checking for module 'libffi'
-- Found libffi, version 3.4.4
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Found Curses: /usr/lib/libcurses.so
-- Checking for module 'ncursesw'
-- Found ncursesw, version 6.4.20231125
-- Checking for module 'readline'
-- Found readline, version 8.2
-- Configuring done (1.3s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build
+ cmake --build build -- package
[ 7%] [32mBuilding C object CMakeFiles/xB.dir/xB.c.o[0m
[ 15%] [32m[1mLinking C executable xB[0m
[ 15%] Built target xB
[ 23%] [34m[1mGenerating files from the list of server numerics[0m
[ 23%] Built target replies
[ 30%] [34m[1mGenerating xC relay protocol code[0m
[ 30%] Built target xC-proto
[ 38%] [32mBuilding C object CMakeFiles/xC.dir/xC.c.o[0m
[ 46%] [32m[1mLinking C executable xC[0m
[ 46%] Built target xC
[ 53%] [32mBuilding C object CMakeFiles/xD.dir/xD.c.o[0m
[ 61%] [32m[1mLinking C executable xD[0m
[ 61%] Built target xD
[ 69%] [32mBuilding C object CMakeFiles/test-xC.dir/xC.c.o[0m
[ 76%] [32m[1mLinking C executable test-xC[0m
[ 76%] Built target test-xC
[ 84%] [34m[1mGenerating man page for xB[0m
[ 92%] [34m[1mGenerating man page for xC[0m
[100%] [34m[1mGenerating man page for xD[0m
[100%] Built target docs
[36mRun CPack packaging tool...[0m
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-1.5.0+239+ga9b4614-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-1.5.0+239+ga9b4614-Linux-x86_64.zip generated.
+ cmake build '-DWANT_READLINE=OFF' '-DWANT_LIBEDIT=ON'
-- Checking for module 'libedit'
-- Found libedit, version 3.1
-- Configuring done (0.2s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build
+ cmake --build build -- package
[ 7%] [32mBuilding C object CMakeFiles/xB.dir/xB.c.o[0m
[ 15%] [32m[1mLinking C executable xB[0m
[ 15%] Built target xB
[ 23%] Built target xC-proto
[ 30%] Built target replies
[ 38%] [32mBuilding C object CMakeFiles/xC.dir/xC.c.o[0m
[ 46%] [32m[1mLinking C executable xC[0m
[ 46%] Built target xC
[ 53%] [32mBuilding C object CMakeFiles/xD.dir/xD.c.o[0m
[ 61%] [32m[1mLinking C executable xD[0m
[ 61%] Built target xD
[ 69%] [32mBuilding C object CMakeFiles/test-xC.dir/xC.c.o[0m
[ 76%] [32m[1mLinking C executable test-xC[0m
[ 76%] Built target test-xC
[100%] Built target docs
[36mRun CPack packaging tool...[0m
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-1.5.0+239+ga9b4614-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-1.5.0+239+ga9b4614-Linux-x86_64.zip generated.
+ cmake --build build -- test
[36mRunning tests...[0m
Test project /home/ci/xK/build
Start 1: test-xC
1/2 Test #1: test-xC .......................... Passed 0.01 sec
Start 2: custom-static-analysis
2/2 Test #2: custom-static-analysis ........... Passed 0.01 sec
100% tests passed, 0 tests failed out of 2
Total Test time (real) = 0.02 sec
+ toolchain=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x86.cmake
+ cmake -B build-xW-x86 -S xW '-DCMAKE_TOOLCHAIN_FILE=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x86.cmake'
-- The CXX compiler identification is GNU 13.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/i686-w64-mingw32-g++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Configuring done (0.4s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build-xW-x86
+ cmake --build build-xW-x86 -- package
[ 6%] [34m[1mGenerating xC relay protocol code[0m
[ 6%] Built target xC-proto
[ 12%] [34m[1mGenerating xW 256x256 application icon[0m
[ 18%] [34m[1mGenerating xW 16x16 application icon[0m
[ 25%] [34m[1mGenerating xW 32x32 application icon[0m
[ 31%] [34m[1mGenerating xW 48x48 application icon[0m
[ 37%] [34m[1mGenerating Windows program icon[0m
[ 43%] [34m[1mGenerating a beep sample[0m
[ 50%] [34m[1mGenerating xW-highlighted 16x16 application icon[0m
[ 56%] [34m[1mGenerating xW-highlighted 256x256 application icon[0m
[ 62%] [34m[1mGenerating xW-highlighted 32x32 application icon[0m
[ 68%] [34m[1mGenerating xW-highlighted 48x48 application icon[0m
[ 75%] [34m[1mGenerating Windows program icon[0m
[ 81%] [32mBuilding CXX object CMakeFiles/xW.dir/xW.cpp.obj[0m
[ 87%] [32mBuilding RC object CMakeFiles/xW.dir/xW.rc.res[0m
[ 93%] [32mBuilding CXX object CMakeFiles/xW.dir/home/ci/xK/liberty/tools/lxdrgen-cpp-win32.cpp.obj[0m
[100%] [32m[1mLinking CXX executable xW.exe[0m
[100%] Built target xW
[36mRun CPack packaging tool...[0m
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xW
CPack: - Install project: xW []
CPack: Create package
CPack: - package: /home/ci/xK/build-xW-x86/xW-1.5.0-win32.zip generated.
+ toolchain=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x64.cmake
+ cmake -B build-xW-x64 -S xW '-DCMAKE_TOOLCHAIN_FILE=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x64.cmake'
-- The CXX compiler identification is GNU 13.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/x86_64-w64-mingw32-g++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Configuring done (0.4s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build-xW-x64
+ cmake --build build-xW-x64 -- package
[ 6%] [34m[1mGenerating xC relay protocol code[0m
[ 6%] Built target xC-proto
[ 12%] [34m[1mGenerating xW 256x256 application icon[0m
[ 18%] [34m[1mGenerating xW 16x16 application icon[0m
[ 25%] [34m[1mGenerating xW 32x32 application icon[0m
[ 31%] [34m[1mGenerating xW 48x48 application icon[0m
[ 37%] [34m[1mGenerating Windows program icon[0m
[ 43%] [34m[1mGenerating a beep sample[0m
[ 50%] [34m[1mGenerating xW-highlighted 16x16 application icon[0m
[ 56%] [34m[1mGenerating xW-highlighted 256x256 application icon[0m
[ 62%] [34m[1mGenerating xW-highlighted 32x32 application icon[0m
[ 68%] [34m[1mGenerating xW-highlighted 48x48 application icon[0m
[ 75%] [34m[1mGenerating Windows program icon[0m
[ 81%] [32mBuilding CXX object CMakeFiles/xW.dir/xW.cpp.obj[0m
[ 87%] [32mBuilding RC object CMakeFiles/xW.dir/xW.rc.res[0m
[ 93%] [32mBuilding CXX object CMakeFiles/xW.dir/home/ci/xK/liberty/tools/lxdrgen-cpp-win32.cpp.obj[0m
[100%] [32m[1mLinking CXX executable xW.exe[0m
[100%] Built target xW
[36mRun CPack packaging tool...[0m
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xW
CPack: - Install project: xW []
CPack: Create package
CPack: - package: /home/ci/xK/build-xW-x64/xW-1.5.0-win64.zip generated.
+ make -C xN
make: Entering directory '/home/ci/xK/xN'
ln -sf ../xS/irc.go irc.go
go build -ldflags "-X 'main.projectVersion=$(cat ../xK-version)'" -o xN
env "asciidoc-release-version=$(cat ../xK-version)" \
env LC_ALL=C awk -f ../liberty/tools/asciiman.awk xN.adoc > xN.1
make: Leaving directory '/home/ci/xK/xN'
+ make -C xS
make: Entering directory '/home/ci/xK/xS'
env LC_ALL=C awk -f xS-gen-replies.awk xS-replies > xS-replies.go
go build -ldflags "-X 'main.projectVersion=$(cat ../xK-version)'" -o xS
env "asciidoc-release-version=$(cat ../xK-version)" \
env LC_ALL=C awk -f ../liberty/tools/asciiman.awk xS.adoc > xS.1
make: Leaving directory '/home/ci/xK/xS'
+ make -C xP
make: Entering directory '/home/ci/xK/xP'
env LC_ALL=C awk -f ../liberty/tools/lxdrgen.awk -f ../liberty/tools/lxdrgen-go.awk \
-v PrefixCamel=Relay ../xC.lxdr > proto.go
go build -o xP
go: downloading nhooyr.io/websocket v1.8.7
go: downloading github.com/klauspost/compress v1.15.9
env LC_ALL=C awk -f ../liberty/tools/lxdrgen.awk -f ../liberty/tools/lxdrgen-mjs.awk ../xC.lxdr > public/proto.js
curl -Lo public/mithril.js https://unpkg.com/mithril/mithril.js
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 75551 0 75551 0 0 394k 0 --:--:-- --:--:-- --:--:-- 394k
make: Leaving directory '/home/ci/xK/xP'