- Created
- 31d ago
- Changed
- 31d ago
- Project
- p/acid
- Commit
- 691b3a1a241a0b086a316506c068618b58bcd8c0
- Runner
- Alpine 3.23
- State
- Success
- Notified
- 1
- Duration
- 2m2s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.23.2-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.23.2-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.23.2-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.1-0-virt (buildozer@build-3-23-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2025-12-15 07:25:33
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 10969150150 cycles
[ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000007] tsc: Detected 3096.002 MHz processor
[ 0.000866] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000904] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000907] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000955] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.008688] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.009035] RAMDISK: [mem 0x7f654000-0x7fffffff]
[ 0.009039] ACPI: Early table checksum verification disabled
[ 0.009042] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.009047] ACPI: RSDT 0x00000000BFFE2458 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.009054] ACPI: FACP 0x00000000BFFE22F4 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.009059] ACPI: DSDT 0x00000000BFFE0040 0022B4 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.009063] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.009066] ACPI: APIC 0x00000000BFFE2368 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.009069] ACPI: HPET 0x00000000BFFE23F8 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.009073] ACPI: WAET 0x00000000BFFE2430 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.009076] ACPI: Reserving FACP table memory at [mem 0xbffe22f4-0xbffe2367]
[ 0.009078] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22f3]
[ 0.009079] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.009080] ACPI: Reserving APIC table memory at [mem 0xbffe2368-0xbffe23f7]
[ 0.009080] ACPI: Reserving HPET table memory at [mem 0xbffe23f8-0xbffe242f]
[ 0.009081] ACPI: Reserving WAET table memory at [mem 0xbffe2430-0xbffe2457]
[ 0.009626] No NUMA configuration found
[ 0.009628] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.009633] NODE_DATA(0) allocated [mem 0x13fff8d40-0x13fffcfff]
[ 0.009671] Zone ranges:
[ 0.009672] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.009674] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.009676] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.009677] Movable zone start for each node
[ 0.009678] Early memory node ranges
[ 0.009679] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.009680] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.009682] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.009683] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.009808] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.009830] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.018514] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.019297] ACPI: PM-Timer IO Port: 0x608
[ 0.019315] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.019358] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.019363] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.019365] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.019366] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.019368] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.019369] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.019375] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.019376] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.019387] CPU topo: Max. logical packages: 1
[ 0.019388] CPU topo: Max. logical dies: 1
[ 0.019389] CPU topo: Max. dies per package: 1
[ 0.019395] CPU topo: Max. threads per core: 1
[ 0.019396] CPU topo: Num. cores per package: 4
[ 0.019397] CPU topo: Num. threads per package: 4
[ 0.019397] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.019426] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.019444] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.019446] Booting paravirtualized kernel on KVM
[ 0.019448] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.023824] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.024097] percpu: Embedded 55 pages/cpu s185176 r8192 d31912 u524288
[ 0.024139] kvm-guest: PV spinlocks disabled, no host support
[ 0.024140] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.024205] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.024211] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.024693] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.024928] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.025029] software IO TLB: area num 4.
[ 0.040082] Fallback order for Node 0: 0
[ 0.040090] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.040092] Policy zone: Normal
[ 0.040361] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.060113] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.060234] Kernel/User page tables isolation: enabled
[ 0.061245] Dynamic Preempt: none
[ 0.061497] rcu: Preemptible hierarchical RCU implementation.
[ 0.061498] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.061501] Trampoline variant of Tasks RCU enabled.
[ 0.061501] Tracing variant of Tasks RCU enabled.
[ 0.061502] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.061503] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.061517] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.061519] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.068627] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.068862] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.068997] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.077560] Console: colour VGA+ 80x25
[ 0.077629] printk: legacy console [ttyS0] enabled
[ 0.274796] ACPI: Core revision 20250807
[ 0.275929] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.278507] APIC: Switch to symmetric I/O mode setup
[ 0.279841] x2apic enabled
[ 0.280752] APIC: Switched APIC routing to: physical x2apic
[ 0.282976] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.284327] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca086da2ab, max_idle_ns: 440795258116 ns
[ 0.286888] Calibrating delay loop (skipped) preset value.. 6192.00 BogoMIPS (lpj=3096002)
[ 0.287973] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.288888] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.289893] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.290891] Speculative Store Bypass: Vulnerable
[ 0.291888] Spectre V2 : Mitigation: Retpolines
[ 0.292887] ITS: Mitigation: Aligned branch/return thunks
[ 0.294888] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.295892] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.296893] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.297895] active return thunk: its_return_thunk
[ 0.298894] x86/fpu: x87 FPU will use FXSAVE
[ 0.322921] Freeing SMP alternatives memory: 40K
[ 0.323898] pid_max: default: 32768 minimum: 301
[ 0.325395] LSM: initializing lsm=lockdown,capability,landlock
[ 0.327316] landlock: Up and running.
[ 0.328103] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.328896] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.432200] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.433193] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.433931] signal: max sigframe size: 1440
[ 0.434956] rcu: Hierarchical SRCU implementation.
[ 0.435889] rcu: Max phase no-delay instances is 400.
[ 0.436986] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.442381] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.443000] smp: Bringing up secondary CPUs ...
[ 0.444093] smpboot: x86: Booting SMP configuration:
[ 0.445885] .... node #0, CPUs: #1 #2 #3
[ 0.451950] smp: Brought up 1 node, 4 CPUs
[ 0.453896] smpboot: Total of 4 processors activated (24768.01 BogoMIPS)
[ 0.455149] Memory: 4000140K/4193760K available (14570K kernel code, 2022K rwdata, 9644K rodata, 2984K init, 1228K bss, 188736K reserved, 0K cma-reserved)
[ 0.456936] devtmpfs: initialized
[ 0.457967] x86/mm: Memory block size: 128MB
[ 0.461005] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.461911] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.462905] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.465693] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.468075] audit: initializing netlink subsys (disabled)
[ 0.470377] audit: type=2000 audit(1767539303.487:1): state=initialized audit_enabled=0 res=1
[ 0.470377] thermal_sys: Registered thermal governor 'step_wise'
[ 0.470913] cpuidle: using governor ladder
[ 0.474904] cpuidle: using governor menu
[ 0.477242] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.481190] PCI: Using configuration type 1 for base access
[ 0.483138] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.485946] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.488889] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.491928] ACPI: Added _OSI(Module Device)
[ 0.492889] ACPI: Added _OSI(Processor Device)
[ 0.493888] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.495799] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.501059] ACPI: Interpreter enabled
[ 0.501902] ACPI: PM: (supports S0 S3 S5)
[ 0.502889] ACPI: Using IOAPIC for interrupt routing
[ 0.503918] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.504889] PCI: Using E820 reservations for host bridge windows
[ 0.506021] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.510439] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.512907] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.515892] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.518910] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.523364] acpiphp: Slot [3] registered
[ 0.525955] acpiphp: Slot [4] registered
[ 0.527932] acpiphp: Slot [5] registered
[ 0.528934] acpiphp: Slot [6] registered
[ 0.530944] acpiphp: Slot [7] registered
[ 0.531947] acpiphp: Slot [8] registered
[ 0.533929] acpiphp: Slot [9] registered
[ 0.535939] acpiphp: Slot [10] registered
[ 0.536925] acpiphp: Slot [11] registered
[ 0.538976] acpiphp: Slot [12] registered
[ 0.540929] acpiphp: Slot [13] registered
[ 0.541935] acpiphp: Slot [14] registered
[ 0.543932] acpiphp: Slot [15] registered
[ 0.544922] acpiphp: Slot [16] registered
[ 0.545928] acpiphp: Slot [17] registered
[ 0.546928] acpiphp: Slot [18] registered
[ 0.547921] acpiphp: Slot [19] registered
[ 0.549931] acpiphp: Slot [20] registered
[ 0.550923] acpiphp: Slot [21] registered
[ 0.551923] acpiphp: Slot [22] registered
[ 0.552884] acpiphp: Slot [23] registered
[ 0.552926] acpiphp: Slot [24] registered
[ 0.554930] acpiphp: Slot [25] registered
[ 0.555937] acpiphp: Slot [26] registered
[ 0.556926] acpiphp: Slot [27] registered
[ 0.557962] acpiphp: Slot [28] registered
[ 0.558922] acpiphp: Slot [29] registered
[ 0.559923] acpiphp: Slot [30] registered
[ 0.561936] acpiphp: Slot [31] registered
[ 0.562912] PCI host bridge to bus 0000:00
[ 0.563895] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.565893] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.567892] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.569891] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.571895] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.573891] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.575979] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.578887] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.582888] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.586729] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.587963] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.589891] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.591892] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.593893] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.596230] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.598889] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.600911] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.603265] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.631962] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.633926] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.634952] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.637061] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.639905] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.644911] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.645907] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.647952] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.649911] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.653890] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.658910] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.659907] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.661950] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.665889] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.674072] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.675907] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.677952] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.681889] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.684055] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.685058] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.687099] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.689997] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.691913] iommu: Default domain type: Translated
[ 0.694889] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.698164] SCSI subsystem initialized
[ 0.700003] pps_core: LinuxPPS API ver. 1 registered
[ 0.701891] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.704906] PTP clock support registered
[ 0.707351] PCI: Using ACPI for IRQ routing
[ 0.710191] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.713031] clocksource: Switched to clocksource kvm-clock
[ 0.717376] VFS: Disk quotas dquot_6.6.0
[ 0.719256] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.722588] pnp: PnP ACPI init
[ 0.724246] pnp: PnP ACPI: found 6 devices
[ 0.736072] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.740356] NET: Registered PF_INET protocol family
[ 0.742652] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.758784] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.762694] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.765433] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.768484] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.771879] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.774290] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.777653] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.780660] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.783773] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.786586] NET: Registered PF_XDP protocol family
[ 0.788143] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.790998] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.793634] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.796091] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.798851] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.801817] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.804449] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.807205] PCI: CLS 0 bytes, default 64
[ 0.808294] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.808409] Unpacking initramfs...
[ 0.811223] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.811282] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca086da2ab, max_idle_ns: 440795258116 ns
[ 0.819552] Initialise system trusted keyrings
[ 0.821682] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.826419] Key type asymmetric registered
[ 0.829205] Asymmetric key parser 'x509' registered
[ 0.832053] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.834517] io scheduler mq-deadline registered
[ 0.835808] io scheduler kyber registered
[ 0.837045] io scheduler bfq registered
[ 0.841185] ERST DBG: ERST support is disabled.
[ 0.845569] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.855187] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.860696] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.872832] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.876931] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.883374] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.888480] scsi host0: ata_piix
[ 0.890451] scsi host1: ata_piix
[ 0.891261] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.894081] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.898496] hv_vmbus: registering driver hv_netvsc
[ 0.901354] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.907854] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.910146] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.911925] hv_vmbus: registering driver hyperv_keyboard
[ 0.914230] rtc_cmos 00:05: RTC can wake from S4
[ 0.917105] rtc_cmos 00:05: registered as rtc0
[ 0.919129] rtc_cmos 00:05: setting system clock to 2026-01-04T15:08:23 UTC (1767539303)
[ 0.920008] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.926000] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.926150] intel_pstate: CPU model not supported
[ 0.926537] gre: GRE over IPv4 demultiplexer driver
[ 0.926666] NET: Registered PF_INET6 protocol family
[ 0.927273] Segment Routing with IPv6
[ 0.927284] In-situ OAM (IOAM) with IPv6
[ 0.930136] Key type dns_resolver registered
[ 0.936911] Freeing initrd memory: 9904K
[ 0.937449] IPI shorthand broadcast: enabled
[ 0.947135] sched_clock: Marking stable (734005255, 213013443)->(1011099362, -64080664)
[ 0.950546] registered taskstats version 1
[ 0.952698] Loading compiled-in X.509 certificates
[ 0.960530] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.967953] Demotion targets for Node 0: null
[ 0.970312] Key type .fscrypt registered
[ 0.971640] Key type fscrypt-provisioning registered
[ 1.049579] ata2: found unknown device (class 0)
[ 1.052172] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.055948] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.079527] Freeing unused kernel image (initmem) memory: 2984K
[ 1.080859] Write protecting the kernel read-only data: 26624k
[ 1.083711] Freeing unused kernel image (text/rodata gap) memory: 1812K
[ 1.085366] Freeing unused kernel image (rodata/data gap) memory: 596K
[ 1.086754] rodata_test: all tests were successful
[ 1.087759] Run /init as init process
[ 1.099886] Alpine Init 3.13.0-r0
[ 1.104758] Loading boot drivers...
Alpine Init 3.13.0-r0
* Loading boot drivers: [ 1.135727] ACPI: bus type USB registered
[ 1.136709] usbcore: registered new interface driver usbfs
[ 1.138238] usbcore: registered new interface driver hub
[ 1.140052] usbcore: registered new device driver usb
[ 1.146798] usbcore: registered new interface driver usb-storage
[ 1.259195] loop: module loaded
[ 1.307231] ACPI: bus type drm_connector registered
[ 1.336115] Loading boot drivers: ok.
ok.
[ 1.338748] Mounting root...
* Mounting root: [ 1.416676] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.419524] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.432894] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.434544] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.437389] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.466942] Console: switching to colour frame buffer device 160x50
[ 1.470619] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.500030] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.501466] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.534927] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.538381] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.557884] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.561205] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.664860] block sr0: the capability attribute has been deprecated.
[ 2.282994] EXT4-fs (vda): mounted filesystem 72d42021-766d-43de-893f-bc82cd7d77a0 ro with ordered data mode. Quota mode: none.
[ 2.285186] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.63 is starting up Linux 6.18.1-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
[ 2.688045] random: crng init done
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting trace filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Mounting bpf filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5520/51200 files, 171668/204800 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 25.3 running 'init-local' at Sun, 04 Jan 2026 15:08:26 +0000. Up 3.87 seconds.
[ ok ]
* Setting hostname to localhost from /etc/hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.3.0 starting
DUID 00:01:00:01:30:ed:3e:eb:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::cb6c:3403:9f66:ecac/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 25.3 running 'init' at Sun, 04 Jan 2026 15:08:39 +0000. Up 16.07 seconds.
ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::cb6c:3403:9f66:ecac/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:jvAZcUKXMJ1JpqmKED7nS0GiYKUMoqmclPBNBirOIAQ root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
|E..oo ++++ |
|B+++ . *= |
|XB... = . |
|#.+ . + |
|+B oo . S |
|..+..o = |
|. .o + . |
| . . |
| . |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:VjxMVhzsd1dwjgTa2ulGAmrEspuHO9RehSzSik+i2xI root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| o++oo..|
| . = oo. +.|
| ..o...*.. . o|
| .+o.oo.+... o|
| ..+o.S.o +. ..|
|E o +=... + |
| o =+... o |
|o. oo. . |
|.o. .. |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:zM3GKJJJlXD4PB2jb29NIJ4V+AlTBBxiDm4LqR7MDqA root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| oo=oo*o |
| o.*..B . |
|. o +o.o * o |
|=. + +=oo== |
|E+ = .+S+=. |
|+ . . .=. . |
| o . . o |
| o . |
| . |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 25.3 running 'modules:config' at Sun, 04 Jan 2026 15:08:39 +0000. Up 16.94 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 25.3 running 'modules:final' at Sun, 04 Jan 2026 15:08:40 +0000. Up 17.43 seconds.
(1/1) Installing ca-certificates (20251003-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20251003-r0.trigger
OK: 136.1 MiB in 208 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
2026-01-04 15:08:42,130 - cc_keys_to_console.py[WARNING]: Unable to activate module keys_to_console, helper tool not found at /usr/lib/cloud-init/write-ssh-key-fingerprints
Cloud-init v. 25.3 finished at Sun, 04 Jan 2026 15:08:42 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 19.09 seconds
[ ok ]
Welcome to Alpine Linux 3.23
Kernel 6.18.1-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
(1/2) Upgrading linux-pam (1.7.1-r1 -> 1.7.1-r2)
Installing file to etc/environment.apk-new
(2/2) Upgrading linux-virt (6.18.1-r0 -> 6.18.2-r0)
Executing busybox-1.37.0-r30.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.13.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.2-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 136.1 MiB in 208 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/10) Installing c-ares (1.34.6-r0)
( 2/10) Installing nghttp2-libs (1.68.0-r0)
( 3/10) Installing nghttp3 (1.13.1-r0)
( 4/10) Installing libpsl (0.21.5-r3)
( 5/10) Installing libcurl (8.17.0-r1)
( 6/10) Installing pcre2 (10.47-r0)
( 7/10) Installing git (2.52.0-r0)
( 8/10) Installing git-init-template (2.52.0-r0)
( 9/10) Installing gnu-libiconv-libs (1.18-r0)
(10/10) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r30.trigger
OK: 145.8 MiB in 218 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/acid.git acid
Cloning into 'acid'...
remote: Enumerating objects: 126, done.
remote: Counting objects: 100% (126/126), done.
remote: Compressing objects: 100% (125/125), done.
remote: Total 126 (delta 79), reused 0 (delta 0), pack-reused 0 (from 0)
Receiving objects: 100% (126/126), 62.52 KiB | 10.42 MiB/s, done.
Resolving deltas: 100% (79/79), done.
+ cd acid
+ git -c 'advice.detachedHead=false' checkout 691b3a1a241a0b086a316506c068618b58bcd8c0
HEAD is now at 691b3a1 Improve Homebrew output parsing
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=691b3a1
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/691b3a1/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base go asciidoctor
( 1/22) Installing ruby-libs (3.4.7-r0)
( 2/22) Installing libucontext (1.3.3-r0)
( 3/22) Installing ruby (3.4.7-r0)
( 4/22) Installing asciidoctor (2.0.26-r0)
( 5/22) Installing jansson (2.14.1-r0)
( 6/22) Installing binutils (2.45.1-r0)
( 7/22) Installing libmagic (5.46-r2)
( 8/22) Installing file (5.46-r2)
( 9/22) Installing libgomp (15.2.0-r2)
(10/22) Installing libatomic (15.2.0-r2)
(11/22) Installing isl26 (0.26-r1)
(12/22) Installing mpfr4 (4.2.2-r0)
(13/22) Installing mpc1 (1.3.1-r1)
(14/22) Installing gcc (15.2.0-r2)
(15/22) Installing libstdc++-dev (15.2.0-r2)
(16/22) Installing musl-dev (1.2.5-r21)
(17/22) Installing g++ (15.2.0-r2)
(18/22) Installing make (4.4.1-r3)
(19/22) Installing fortify-headers (1.1-r5)
(20/22) Installing patch (2.8-r0)
(21/22) Installing build-base (0.5-r3)
(22/22) Installing go (1.25.5-r0)
Executing busybox-1.37.0-r30.trigger
OK: 580.0 MiB in 240 packages
+ make all test
go build -ldflags "-X 'main.projectVersion=dev'" -o acid
go: downloading github.com/mattn/go-sqlite3 v1.14.24
go: downloading github.com/pkg/sftp v1.13.7
go: downloading golang.org/x/crypto v0.31.0
go: downloading gopkg.in/yaml.v3 v3.0.1
go: downloading github.com/kr/fs v0.1.0
asciidoctor -b manpage -a release-version=dev -o acid.1 acid.adoc || \
a2x -d manpage -f manpage -a release-version=dev acid.adoc
go test
PASS
ok janouch.name/acid 0.002s
Deploy log