- Created
- 25d ago
- Changed
- 25d ago
- Project
- p/sdn
- Commit
- 600d5b724bfdda120df848d6cb77e6bfc58645a8
- Runner
- Alpine 3.23
- State
- Success
- Notified
- 1
- Duration
- 1m5s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.23.2-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.23.2-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.23.2-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.1-0-virt (buildozer@build-3-23-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2025-12-15 07:25:33
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 10845097001 cycles
[ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000004] tsc: Detected 3096.002 MHz processor
[ 0.000447] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000473] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000476] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000509] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007152] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007312] RAMDISK: [mem 0x7f654000-0x7fffffff]
[ 0.007314] ACPI: Early table checksum verification disabled
[ 0.007316] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007319] ACPI: RSDT 0x00000000BFFE2458 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007323] ACPI: FACP 0x00000000BFFE22F4 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007327] ACPI: DSDT 0x00000000BFFE0040 0022B4 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007330] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007332] ACPI: APIC 0x00000000BFFE2368 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007335] ACPI: HPET 0x00000000BFFE23F8 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007337] ACPI: WAET 0x00000000BFFE2430 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007339] ACPI: Reserving FACP table memory at [mem 0xbffe22f4-0xbffe2367]
[ 0.007340] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22f3]
[ 0.007341] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007341] ACPI: Reserving APIC table memory at [mem 0xbffe2368-0xbffe23f7]
[ 0.007342] ACPI: Reserving HPET table memory at [mem 0xbffe23f8-0xbffe242f]
[ 0.007342] ACPI: Reserving WAET table memory at [mem 0xbffe2430-0xbffe2457]
[ 0.007744] No NUMA configuration found
[ 0.007745] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.007747] NODE_DATA(0) allocated [mem 0x13fff8d40-0x13fffcfff]
[ 0.007767] Zone ranges:
[ 0.007767] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007768] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007769] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007770] Movable zone start for each node
[ 0.007771] Early memory node ranges
[ 0.007771] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.007772] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.007773] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007773] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.007860] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007872] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013342] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.013979] ACPI: PM-Timer IO Port: 0x608
[ 0.013993] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.014026] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.014028] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014030] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.014031] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014032] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.014032] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.014036] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.014036] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014043] CPU topo: Max. logical packages: 1
[ 0.014044] CPU topo: Max. logical dies: 1
[ 0.014044] CPU topo: Max. dies per package: 1
[ 0.014048] CPU topo: Max. threads per core: 1
[ 0.014048] CPU topo: Num. cores per package: 4
[ 0.014049] CPU topo: Num. threads per package: 4
[ 0.014049] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.014063] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.014074] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.014075] Booting paravirtualized kernel on KVM
[ 0.014076] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.017624] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.017818] percpu: Embedded 55 pages/cpu s185176 r8192 d31912 u524288
[ 0.017842] kvm-guest: PV spinlocks disabled, no host support
[ 0.017842] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.017881] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.017886] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.018206] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.018367] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.018443] software IO TLB: area num 4.
[ 0.029715] Fallback order for Node 0: 0
[ 0.029720] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.029721] Policy zone: Normal
[ 0.029915] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.041827] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.041890] Kernel/User page tables isolation: enabled
[ 0.042591] Dynamic Preempt: none
[ 0.042734] rcu: Preemptible hierarchical RCU implementation.
[ 0.042734] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.042736] Trampoline variant of Tasks RCU enabled.
[ 0.042736] Tracing variant of Tasks RCU enabled.
[ 0.042737] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.042737] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.042744] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.042745] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.046673] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.046872] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.046952] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.053479] Console: colour VGA+ 80x25
[ 0.053529] printk: legacy console [ttyS0] enabled
[ 0.205090] ACPI: Core revision 20250807
[ 0.206182] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.208119] APIC: Switch to symmetric I/O mode setup
[ 0.209300] x2apic enabled
[ 0.210155] APIC: Switched APIC routing to: physical x2apic
[ 0.212344] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.213730] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca086da2ab, max_idle_ns: 440795258116 ns
[ 0.216000] Calibrating delay loop (skipped) preset value.. 6192.00 BogoMIPS (lpj=3096002)
[ 0.217081] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.218000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.219002] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.220001] Speculative Store Bypass: Vulnerable
[ 0.221000] Spectre V2 : Mitigation: Retpolines
[ 0.222000] ITS: Mitigation: Aligned branch/return thunks
[ 0.223000] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.224000] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.225000] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.226001] active return thunk: its_return_thunk
[ 0.227001] x86/fpu: x87 FPU will use FXSAVE
[ 0.243480] Freeing SMP alternatives memory: 40K
[ 0.244003] pid_max: default: 32768 minimum: 301
[ 0.245269] LSM: initializing lsm=lockdown,capability,landlock
[ 0.246423] landlock: Up and running.
[ 0.247123] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.248002] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.352756] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.353180] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.354023] signal: max sigframe size: 1440
[ 0.355029] rcu: Hierarchical SRCU implementation.
[ 0.355999] rcu: Max phase no-delay instances is 400.
[ 0.357048] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.360922] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.361043] smp: Bringing up secondary CPUs ...
[ 0.362094] smpboot: x86: Booting SMP configuration:
[ 0.363002] .... node #0, CPUs: #1 #2 #3
[ 0.367060] smp: Brought up 1 node, 4 CPUs
[ 0.369002] smpboot: Total of 4 processors activated (24768.01 BogoMIPS)
[ 0.370246] Memory: 4000140K/4193760K available (14570K kernel code, 2022K rwdata, 9644K rodata, 2984K init, 1228K bss, 188736K reserved, 0K cma-reserved)
[ 0.371213] devtmpfs: initialized
[ 0.372037] x86/mm: Memory block size: 128MB
[ 0.374032] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.376005] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.378005] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.380801] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.382076] audit: initializing netlink subsys (disabled)
[ 0.383012] audit: type=2000 audit(1768050711.939:1): state=initialized audit_enabled=0 res=1
[ 0.383083] thermal_sys: Registered thermal governor 'step_wise'
[ 0.385011] cpuidle: using governor ladder
[ 0.388003] cpuidle: using governor menu
[ 0.389102] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.390243] PCI: Using configuration type 1 for base access
[ 0.392070] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.394034] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.395000] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.397186] ACPI: Added _OSI(Module Device)
[ 0.397952] ACPI: Added _OSI(Processor Device)
[ 0.399000] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.401512] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.405033] ACPI: Interpreter enabled
[ 0.405897] ACPI: PM: (supports S0 S3 S5)
[ 0.406000] ACPI: Using IOAPIC for interrupt routing
[ 0.407011] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.408000] PCI: Using E820 reservations for host bridge windows
[ 0.409085] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.412310] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.413004] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.415001] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.417019] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.420282] acpiphp: Slot [3] registered
[ 0.421020] acpiphp: Slot [4] registered
[ 0.422021] acpiphp: Slot [5] registered
[ 0.422912] acpiphp: Slot [6] registered
[ 0.423019] acpiphp: Slot [7] registered
[ 0.424021] acpiphp: Slot [8] registered
[ 0.425020] acpiphp: Slot [9] registered
[ 0.426019] acpiphp: Slot [10] registered
[ 0.427019] acpiphp: Slot [11] registered
[ 0.428019] acpiphp: Slot [12] registered
[ 0.429019] acpiphp: Slot [13] registered
[ 0.430019] acpiphp: Slot [14] registered
[ 0.430927] acpiphp: Slot [15] registered
[ 0.431019] acpiphp: Slot [16] registered
[ 0.432019] acpiphp: Slot [17] registered
[ 0.433019] acpiphp: Slot [18] registered
[ 0.434057] acpiphp: Slot [19] registered
[ 0.435021] acpiphp: Slot [20] registered
[ 0.436021] acpiphp: Slot [21] registered
[ 0.437032] acpiphp: Slot [22] registered
[ 0.438021] acpiphp: Slot [23] registered
[ 0.439021] acpiphp: Slot [24] registered
[ 0.440019] acpiphp: Slot [25] registered
[ 0.440924] acpiphp: Slot [26] registered
[ 0.441019] acpiphp: Slot [27] registered
[ 0.443020] acpiphp: Slot [28] registered
[ 0.443881] acpiphp: Slot [29] registered
[ 0.444022] acpiphp: Slot [30] registered
[ 0.445019] acpiphp: Slot [31] registered
[ 0.446015] PCI host bridge to bus 0000:00
[ 0.447002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.448000] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.450001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.452000] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.453000] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.455000] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.457020] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.459609] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.462175] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.464972] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.466059] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.467000] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.468000] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.470000] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.472043] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.474494] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.476013] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.478012] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.482000] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.484025] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.485048] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.487118] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.489516] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.493000] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.494031] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.495067] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.497013] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.499922] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.505014] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.506014] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.507048] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.510681] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.515013] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.516015] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.518063] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.522000] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.524124] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.526185] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.528113] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.530067] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.532000] iommu: Default domain type: Translated
[ 0.533000] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.535142] SCSI subsystem initialized
[ 0.536087] pps_core: LinuxPPS API ver. 1 registered
[ 0.537000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.540004] PTP clock support registered
[ 0.541340] PCI: Using ACPI for IRQ routing
[ 0.543245] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.545011] clocksource: Switched to clocksource kvm-clock
[ 0.547578] VFS: Disk quotas dquot_6.6.0
[ 0.548702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.550862] pnp: PnP ACPI init
[ 0.552037] pnp: PnP ACPI: found 6 devices
[ 0.559897] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.562595] NET: Registered PF_INET protocol family
[ 0.563902] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.574170] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.576325] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.578455] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.580685] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.582707] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.584629] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.586633] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.588402] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.590348] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.591842] NET: Registered PF_XDP protocol family
[ 0.593104] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.594737] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.596504] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.598336] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.600156] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.602106] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.603755] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.605449] PCI: CLS 0 bytes, default 64
[ 0.606538] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.606682] Unpacking initramfs...
[ 0.608298] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.608350] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca086da2ab, max_idle_ns: 440795258116 ns
[ 0.613988] Initialise system trusted keyrings
[ 0.615130] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.616817] Key type asymmetric registered
[ 0.617792] Asymmetric key parser 'x509' registered
[ 0.619035] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.620836] io scheduler mq-deadline registered
[ 0.621863] io scheduler kyber registered
[ 0.622866] io scheduler bfq registered
[ 0.624599] ERST DBG: ERST support is disabled.
[ 0.626714] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.630045] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.634312] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.641023] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.642749] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.645506] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.647727] scsi host0: ata_piix
[ 0.648716] scsi host1: ata_piix
[ 0.649499] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.651150] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.652773] hv_vmbus: registering driver hv_netvsc
[ 0.654152] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.656837] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.657912] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.658980] hv_vmbus: registering driver hyperv_keyboard
[ 0.660180] rtc_cmos 00:05: RTC can wake from S4
[ 0.661896] rtc_cmos 00:05: registered as rtc0
[ 0.662518] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.663347] rtc_cmos 00:05: setting system clock to 2026-01-10T13:11:51 UTC (1768050711)
[ 0.667365] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.669196] intel_pstate: CPU model not supported
[ 0.670543] gre: GRE over IPv4 demultiplexer driver
[ 0.671970] NET: Registered PF_INET6 protocol family
[ 0.673855] Segment Routing with IPv6
[ 0.674857] In-situ OAM (IOAM) with IPv6
[ 0.676012] Key type dns_resolver registered
[ 0.677258] IPI shorthand broadcast: enabled
[ 0.680835] sched_clock: Marking stable (516007645, 164120361)->(700031259, -19903253)
[ 0.683037] registered taskstats version 1
[ 0.684277] Loading compiled-in X.509 certificates
[ 0.692605] Freeing initrd memory: 9904K
[ 0.697795] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.701732] Demotion targets for Node 0: null
[ 0.702849] Key type .fscrypt registered
[ 0.703785] Key type fscrypt-provisioning registered
[ 0.812017] ata2: found unknown device (class 0)
[ 0.817229] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.825829] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.851827] Freeing unused kernel image (initmem) memory: 2984K
[ 0.855889] Write protecting the kernel read-only data: 26624k
[ 0.864085] Freeing unused kernel image (text/rodata gap) memory: 1812K
[ 0.868977] Freeing unused kernel image (rodata/data gap) memory: 596K
[ 0.872159] rodata_test: all tests were successful
[ 0.874373] Run /init as init process
[ 0.887897] Alpine Init 3.13.0-r0
Alpine Init 3.13.0-r0
[ 0.889636] Loading boot drivers...
* Loading boot drivers: [ 0.908401] ACPI: bus type USB registered
[ 0.909090] usbcore: registered new interface driver usbfs
[ 0.910044] usbcore: registered new interface driver hub
[ 0.910952] usbcore: registered new device driver usb
[ 0.915026] usbcore: registered new interface driver usb-storage
[ 0.959383] loop: module loaded
[ 0.986880] ACPI: bus type drm_connector registered
[ 1.005195] Loading boot drivers: ok.
ok.
[ 1.007317] Mounting root...
* Mounting root: [ 1.029475] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.030801] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.036131] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.036896] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.038180] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.049987] Console: switching to colour frame buffer device 160x50
[ 1.052193] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.082139] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.083166] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.118509] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.121464] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.124657] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.127421] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.161721] block sr0: the capability attribute has been deprecated.
[ 1.977363] EXT4-fs (vda): mounted filesystem 72d42021-766d-43de-893f-bc82cd7d77a0 ro with ordered data mode. Quota mode: none.
[ 1.985368] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.63 is starting up Linux 6.18.1-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
[ 2.504176] random: crng init done
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting trace filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Mounting bpf filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5520/51200 files, 171668/204800 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 25.3 running 'init-local' at Sat, 10 Jan 2026 13:11:53 +0000. Up 3.49 seconds.
[ ok ]
* Setting hostname to localhost from /etc/hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.3.0 starting
DUID 00:01:00:01:30:f5:0c:9a:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::325b:6db5:213:3737/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 25.3 running 'init' at Sat, 10 Jan 2026 13:12:07 +0000. Up 17.21 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::325b:6db5:213:3737/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:V9w2PO7MGuB1HMKrtLEMswQavoraLKFMP3td3ZRfFZk root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| .+|
| o o E.|
| . . = O .|
| . o . . O +.|
| o S * = = .|
|.. . . X O * . |
|+.. . . o * . + |
|o= + . . o |
|+.+.+ . |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:ZK4PXeUgV428VX7K10fsZRxSQrDduny79/H1nPSefbU root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| o+*.+.|
| .= *+.|
| + o..+ .O|
| + o +...=+|
| S . ..o =|
| o . . ..o|
| o . o ++|
| o oE&|
| . *&|
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:0DeD6r3l0nwXQceEFLOvPgUvQ9ReR4SlYkUYLLIe3uk root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| ..=*@=|
| .... o.=+*|
| . oo+.ooooo|
| oo. + .+..|
| .oSo . . +.|
| . .o o +.o|
| . .+. .= |
| .+E ..o |
| .... ... |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 25.3 running 'modules:config' at Sat, 10 Jan 2026 13:12:08 +0000. Up 18.11 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 25.3 running 'modules:final' at Sat, 10 Jan 2026 13:12:08 +0000. Up 18.59 seconds.
(1/1) Installing ca-certificates (20251003-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20251003-r0.trigger
OK: 136.1 MiB in 208 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
2026-01-10 13:12:10,416 - cc_keys_to_console.py[WARNING]: Unable to activate module keys_to_console, helper tool not found at /usr/lib/cloud-init/write-ssh-key-fingerprints
Cloud-init v. 25.3 finished at Sat, 10 Jan 2026 13:12:10 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 20.24 seconds
[ ok ]
Welcome to Alpine Linux 3.23
Kernel 6.18.1-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
(1/2) Upgrading linux-pam (1.7.1-r1 -> 1.7.1-r2)
Installing file to etc/environment.apk-new
(2/2) Upgrading linux-virt (6.18.1-r0 -> 6.18.4-r0)
Executing busybox-1.37.0-r30.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.13.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.4-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 136.2 MiB in 208 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/10) Installing c-ares (1.34.6-r0)
( 2/10) Installing nghttp2-libs (1.68.0-r0)
( 3/10) Installing nghttp3 (1.13.1-r0)
( 4/10) Installing libpsl (0.21.5-r3)
( 5/10) Installing libcurl (8.17.0-r1)
( 6/10) Installing pcre2 (10.47-r0)
( 7/10) Installing git (2.52.0-r0)
( 8/10) Installing git-init-template (2.52.0-r0)
( 9/10) Installing gnu-libiconv-libs (1.18-r0)
(10/10) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r30.trigger
OK: 145.8 MiB in 218 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/sdn.git sdn
Cloning into 'sdn'...
remote: Enumerating objects: 670, done.
remote: Counting objects: 100% (141/141), done.
remote: Compressing objects: 100% (140/140), done.
remote: Total 670 (delta 85), reused 0 (delta 0), pack-reused 529 (from 1)
Receiving objects: 100% (670/670), 360.22 KiB | 20.01 MiB/s, done.
Resolving deltas: 100% (429/429), done.
+ cd sdn
+ git -c 'advice.detachedHead=false' checkout 600d5b724bfdda120df848d6cb77e6bfc58645a8
HEAD is now at 600d5b7 Bump version
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=1.1.0
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/1.1.0/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake ncurses-dev ncurses-static acl-dev acl-static
( 1/31) Installing acl-libs (2.3.2-r1)
( 2/31) Installing pkgconf (2.5.1-r0)
( 3/31) Installing acl-dev (2.3.2-r1)
( 4/31) Installing acl-static (2.3.2-r1)
( 5/31) Installing jansson (2.14.1-r0)
( 6/31) Installing binutils (2.45.1-r0)
( 7/31) Installing libmagic (5.46-r2)
( 8/31) Installing file (5.46-r2)
( 9/31) Installing libgomp (15.2.0-r2)
(10/31) Installing libatomic (15.2.0-r2)
(11/31) Installing isl26 (0.26-r1)
(12/31) Installing mpfr4 (4.2.2-r0)
(13/31) Installing mpc1 (1.3.1-r1)
(14/31) Installing gcc (15.2.0-r2)
(15/31) Installing libstdc++-dev (15.2.0-r2)
(16/31) Installing musl-dev (1.2.5-r21)
(17/31) Installing g++ (15.2.0-r2)
(18/31) Installing make (4.4.1-r3)
(19/31) Installing fortify-headers (1.1-r5)
(20/31) Installing patch (2.8-r0)
(21/31) Installing build-base (0.5-r3)
(22/31) Installing lz4-libs (1.10.0-r0)
(23/31) Installing libarchive (3.8.4-r0)
(24/31) Installing rhash-libs (1.4.6-r0)
(25/31) Installing libuv (1.51.0-r0)
(26/31) Installing cmake (4.1.3-r0)
(27/31) Installing libformw (6.5_p20251123-r0)
(28/31) Installing libmenuw (6.5_p20251123-r0)
(29/31) Installing libncurses++ (6.5_p20251123-r0)
(30/31) Installing ncurses-dev (6.5_p20251123-r0)
(31/31) Installing ncurses-static (6.5_p20251123-r0)
Executing busybox-1.37.0-r30.trigger
OK: 472.5 MiB in 249 packages
+ make
c++ -g -std=c++14 -Wall -Wextra -Wno-misleading-indentation -pedantic `sed -ne '/^project (\([^ )]*\) VERSION \([^ )]*\).*/ s//-DPROJECT_NAME="\1" -DPROJECT_VERSION="\2"/p' CMakeLists.txt` sdn.cpp -o sdn \
-lacl `pkg-config --libs --cflags ncursesw`
+ cmake -B build
-- The CXX compiler identification is GNU 15.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for module 'libacl'
-- Found libacl, version 2.3.2
-- Checking for module 'ncursesw'
-- Found ncursesw, version 6.5.20251123
-- Configuring done (0.3s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/sdn/build
+ cmake --build build -- package
[ 25%] Building CXX object CMakeFiles/sdn.dir/sdn.cpp.o
[ 50%] Linking CXX executable sdn
[ 50%] Built target sdn
[ 75%] Building CXX object CMakeFiles/sdn-mc-ext.dir/sdn-mc-ext.cpp.o
[100%] Linking CXX executable sdn-mc-ext
[100%] Built target sdn-mc-ext
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: sdn
CPack: - Install project: sdn []
CPack: Create package
CPack: - package: /home/ci/sdn/build/sdn-1.1.0-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: sdn
CPack: - Install project: sdn []
CPack: Create package
CPack: - package: /home/ci/sdn/build/sdn-1.1.0-Linux-x86_64.zip generated.
+ cmake -B build-static '-DCMAKE_BUILD_TYPE=Release' '-DCMAKE_EXE_LINKER_FLAGS=-static' '-DCPACK_STRIP_FILES=YES' '-DCMAKE_INSTALL_PREFIX=/' '-DCMAKE_INSTALL_BINDIR=/' '-DCMAKE_INSTALL_MANDIR=/man' '-DCMAKE_INSTALL_DOCDIR=/doc'
-- The CXX compiler identification is GNU 15.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for module 'libacl'
-- Found libacl, version 2.3.2
-- Checking for module 'ncursesw'
-- Found ncursesw, version 6.5.20251123
-- Configuring done (0.3s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/sdn/build-static
+ sed -i 's/"sdn-/&static-/' build-static/CPackConfig.cmake
+ cmake --build build-static -- package
[ 25%] Building CXX object CMakeFiles/sdn.dir/sdn.cpp.o
[ 50%] Linking CXX executable sdn
[ 50%] Built target sdn
[ 75%] Building CXX object CMakeFiles/sdn-mc-ext.dir/sdn-mc-ext.cpp.o
[100%] Linking CXX executable sdn-mc-ext
[100%] Built target sdn-mc-ext
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: sdn
CPack: - Install project: sdn []
CPack: Create package
CPack: - package: /home/ci/sdn/build-static/sdn-static-1.1.0-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: sdn
CPack: - Install project: sdn []
CPack: Create package
CPack: - package: /home/ci/sdn/build-static/sdn-static-1.1.0-Linux-x86_64.zip generated.
+ mv build-static/sdn-static-1.1.0-Linux-x86_64.tar.gz /home/ci/acid-deploy
Deploy log
+ mv -- sdn-static-1.1.0-Linux-x86_64.tar.gz /home/acid/cd