- Created
- 25d ago
- Changed
- 25d ago
- Project
- p/acid
- Commit
- 86c8f3ddf20898c29c41ba54e0158c3c5a27c344
- Runner
- Alpine 3.23
- State
- Success
- Notified
- 1
- Duration
- 2m8s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.23.2-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.23.2-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.23.2-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.1-0-virt (buildozer@build-3-23-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2025-12-15 07:25:33
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 10969055982 cycles
[ 0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000006] tsc: Detected 3096.002 MHz processor
[ 0.000969] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.001008] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001011] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001059] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.009581] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.009969] RAMDISK: [mem 0x7f654000-0x7fffffff]
[ 0.009973] ACPI: Early table checksum verification disabled
[ 0.009976] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.009982] ACPI: RSDT 0x00000000BFFE2458 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.009988] ACPI: FACP 0x00000000BFFE22F4 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.009994] ACPI: DSDT 0x00000000BFFE0040 0022B4 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.009999] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.010002] ACPI: APIC 0x00000000BFFE2368 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.010006] ACPI: HPET 0x00000000BFFE23F8 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.010010] ACPI: WAET 0x00000000BFFE2430 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.010014] ACPI: Reserving FACP table memory at [mem 0xbffe22f4-0xbffe2367]
[ 0.010015] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22f3]
[ 0.010017] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.010018] ACPI: Reserving APIC table memory at [mem 0xbffe2368-0xbffe23f7]
[ 0.010019] ACPI: Reserving HPET table memory at [mem 0xbffe23f8-0xbffe242f]
[ 0.010020] ACPI: Reserving WAET table memory at [mem 0xbffe2430-0xbffe2457]
[ 0.010561] No NUMA configuration found
[ 0.010563] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.010567] NODE_DATA(0) allocated [mem 0x13fff8d40-0x13fffcfff]
[ 0.010600] Zone ranges:
[ 0.010600] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.010602] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.010604] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.010606] Movable zone start for each node
[ 0.010607] Early memory node ranges
[ 0.010607] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.010609] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.010611] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.010612] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.010723] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.010743] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.019529] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.020341] ACPI: PM-Timer IO Port: 0x608
[ 0.020359] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.020401] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.020405] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.020407] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.020409] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.020410] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.020412] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.020417] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.020418] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.020429] CPU topo: Max. logical packages: 1
[ 0.020430] CPU topo: Max. logical dies: 1
[ 0.020431] CPU topo: Max. dies per package: 1
[ 0.020437] CPU topo: Max. threads per core: 1
[ 0.020439] CPU topo: Num. cores per package: 4
[ 0.020439] CPU topo: Num. threads per package: 4
[ 0.020440] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.020458] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.020475] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.020476] Booting paravirtualized kernel on KVM
[ 0.020478] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.025464] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.025734] percpu: Embedded 55 pages/cpu s185176 r8192 d31912 u524288
[ 0.025774] kvm-guest: PV spinlocks disabled, no host support
[ 0.025775] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.025841] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.025846] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.026311] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.026536] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.026637] software IO TLB: area num 4.
[ 0.040324] Fallback order for Node 0: 0
[ 0.040330] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.040332] Policy zone: Normal
[ 0.040623] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.061323] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.061450] Kernel/User page tables isolation: enabled
[ 0.062455] Dynamic Preempt: none
[ 0.062690] rcu: Preemptible hierarchical RCU implementation.
[ 0.062691] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.062693] Trampoline variant of Tasks RCU enabled.
[ 0.062693] Tracing variant of Tasks RCU enabled.
[ 0.062694] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.062695] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.062706] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.062708] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.070458] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.070705] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.070827] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.080035] Console: colour VGA+ 80x25
[ 0.080108] printk: legacy console [ttyS0] enabled
[ 0.343482] ACPI: Core revision 20250807
[ 0.344906] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.347567] APIC: Switch to symmetric I/O mode setup
[ 0.350404] x2apic enabled
[ 0.351561] APIC: Switched APIC routing to: physical x2apic
[ 0.354394] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.356076] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca086da2ab, max_idle_ns: 440795258116 ns
[ 0.359049] Calibrating delay loop (skipped) preset value.. 6192.00 BogoMIPS (lpj=3096002)
[ 0.360165] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.361047] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.362052] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.363049] Speculative Store Bypass: Vulnerable
[ 0.364048] Spectre V2 : Mitigation: Retpolines
[ 0.365047] ITS: Mitigation: Aligned branch/return thunks
[ 0.366048] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.367052] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.368051] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.370049] active return thunk: its_return_thunk
[ 0.371050] x86/fpu: x87 FPU will use FXSAVE
[ 0.402732] Freeing SMP alternatives memory: 40K
[ 0.403056] pid_max: default: 32768 minimum: 301
[ 0.405502] LSM: initializing lsm=lockdown,capability,landlock
[ 0.407612] landlock: Up and running.
[ 0.408265] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.409057] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.489196] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.491097] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.492093] signal: max sigframe size: 1440
[ 0.493123] rcu: Hierarchical SRCU implementation.
[ 0.494046] rcu: Max phase no-delay instances is 400.
[ 0.496053] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.502589] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.504082] smp: Bringing up secondary CPUs ...
[ 0.505199] smpboot: x86: Booting SMP configuration:
[ 0.506048] .... node #0, CPUs: #1 #2 #3
[ 0.511289] smp: Brought up 1 node, 4 CPUs
[ 0.513047] smpboot: Total of 4 processors activated (24768.01 BogoMIPS)
[ 0.515115] Memory: 4000136K/4193760K available (14570K kernel code, 2022K rwdata, 9644K rodata, 2984K init, 1228K bss, 188740K reserved, 0K cma-reserved)
[ 0.516373] devtmpfs: initialized
[ 0.517101] x86/mm: Memory block size: 128MB
[ 0.518768] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.520071] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.524059] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.528854] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.532043] audit: initializing netlink subsys (disabled)
[ 0.535220] thermal_sys: Registered thermal governor 'step_wise'
[ 0.535185] audit: type=2000 audit(1768079512.822:1): state=initialized audit_enabled=0 res=1
[ 0.545049] cpuidle: using governor ladder
[ 0.547060] cpuidle: using governor menu
[ 0.551305] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.555920] PCI: Using configuration type 1 for base access
[ 0.561255] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.567140] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.568048] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.573276] ACPI: Added _OSI(Module Device)
[ 0.574048] ACPI: Added _OSI(Processor Device)
[ 0.575047] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.577885] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.580233] ACPI: Interpreter enabled
[ 0.581043] ACPI: PM: (supports S0 S3 S5)
[ 0.582047] ACPI: Using IOAPIC for interrupt routing
[ 0.584078] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.588048] PCI: Using E820 reservations for host bridge windows
[ 0.591179] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.599134] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.602069] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.605050] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.610067] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.614597] acpiphp: Slot [3] registered
[ 0.617127] acpiphp: Slot [4] registered
[ 0.619146] acpiphp: Slot [5] registered
[ 0.620100] acpiphp: Slot [6] registered
[ 0.622076] acpiphp: Slot [7] registered
[ 0.623074] acpiphp: Slot [8] registered
[ 0.624074] acpiphp: Slot [9] registered
[ 0.625080] acpiphp: Slot [10] registered
[ 0.626074] acpiphp: Slot [11] registered
[ 0.627074] acpiphp: Slot [12] registered
[ 0.628073] acpiphp: Slot [13] registered
[ 0.629073] acpiphp: Slot [14] registered
[ 0.630073] acpiphp: Slot [15] registered
[ 0.631070] acpiphp: Slot [16] registered
[ 0.632081] acpiphp: Slot [17] registered
[ 0.633074] acpiphp: Slot [18] registered
[ 0.634073] acpiphp: Slot [19] registered
[ 0.635073] acpiphp: Slot [20] registered
[ 0.636073] acpiphp: Slot [21] registered
[ 0.637075] acpiphp: Slot [22] registered
[ 0.638076] acpiphp: Slot [23] registered
[ 0.640077] acpiphp: Slot [24] registered
[ 0.642101] acpiphp: Slot [25] registered
[ 0.644078] acpiphp: Slot [26] registered
[ 0.647086] acpiphp: Slot [27] registered
[ 0.649091] acpiphp: Slot [28] registered
[ 0.652078] acpiphp: Slot [29] registered
[ 0.653088] acpiphp: Slot [30] registered
[ 0.655097] acpiphp: Slot [31] registered
[ 0.657074] PCI host bridge to bus 0000:00
[ 0.659056] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.662066] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.664049] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.667051] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.670051] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.673051] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.675148] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.679734] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.684534] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.689766] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.692137] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.695048] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.698049] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.699120] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.702247] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.707584] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.710080] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.715048] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.729120] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.732098] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.736116] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.739208] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.743046] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.749472] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.752065] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.755109] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.760071] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.766330] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.814283] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.815066] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.817114] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.821452] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.893244] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.896068] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.899117] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.909071] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.911230] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.913240] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.914127] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.915043] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.916719] iommu: Default domain type: Translated
[ 0.918047] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.920450] SCSI subsystem initialized
[ 0.922172] pps_core: LinuxPPS API ver. 1 registered
[ 0.923046] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.926058] PTP clock support registered
[ 0.927556] PCI: Using ACPI for IRQ routing
[ 0.930126] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.932147] clocksource: Switched to clocksource kvm-clock
[ 0.934179] VFS: Disk quotas dquot_6.6.0
[ 0.937175] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.941653] pnp: PnP ACPI init
[ 0.949686] pnp: PnP ACPI: found 6 devices
[ 0.973225] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.979544] NET: Registered PF_INET protocol family
[ 0.981110] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.997012] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 1.005561] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.007907] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.012130] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 1.016029] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.022026] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 1.024214] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 1.029935] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 1.032641] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.037279] NET: Registered PF_XDP protocol family
[ 1.042446] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.044327] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.049772] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.051573] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 1.053481] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 1.059366] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 1.061092] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 1.065982] PCI: CLS 0 bytes, default 64
[ 1.067594] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.067762] Unpacking initramfs...
[ 1.069845] software IO TLB: mapped [mem 0x00000000b9000000-0x00000000bd000000] (64MB)
[ 1.075472] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca086da2ab, max_idle_ns: 440795258116 ns
[ 1.081971] Initialise system trusted keyrings
[ 1.086104] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 1.088103] Key type asymmetric registered
[ 1.089670] Asymmetric key parser 'x509' registered
[ 1.091645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.094930] io scheduler mq-deadline registered
[ 1.097028] io scheduler kyber registered
[ 1.098869] io scheduler bfq registered
[ 1.111356] ERST DBG: ERST support is disabled.
[ 1.114752] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 1.122638] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 1.132912] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 1.181976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.183901] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.196015] VMware PVSCSI driver - version 1.0.7.0-k
[ 1.205341] scsi host0: ata_piix
[ 1.206702] scsi host1: ata_piix
[ 1.207701] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 1.210799] Freeing initrd memory: 9904K
[ 1.211422] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 1.211498] hv_vmbus: registering driver hv_netvsc
[ 1.211580] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.213583] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.231970] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.234959] hv_vmbus: registering driver hyperv_keyboard
[ 1.238976] rtc_cmos 00:05: RTC can wake from S4
[ 1.241836] rtc_cmos 00:05: registered as rtc0
[ 1.243215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.247389] rtc_cmos 00:05: setting system clock to 2026-01-10T21:11:53 UTC (1768079513)
[ 1.255485] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.260869] intel_pstate: CPU model not supported
[ 1.262661] gre: GRE over IPv4 demultiplexer driver
[ 1.267688] NET: Registered PF_INET6 protocol family
[ 1.269850] Segment Routing with IPv6
[ 1.274654] In-situ OAM (IOAM) with IPv6
[ 1.280305] Key type dns_resolver registered
[ 1.281556] IPI shorthand broadcast: enabled
[ 1.286662] sched_clock: Marking stable (1004007103, 282331541)->(1432266955, -145928311)
[ 1.293934] registered taskstats version 1
[ 1.295660] Loading compiled-in X.509 certificates
[ 1.304478] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 1.310563] Demotion targets for Node 0: null
[ 1.313181] Key type .fscrypt registered
[ 1.315227] Key type fscrypt-provisioning registered
[ 1.368690] ata2: found unknown device (class 0)
[ 1.374639] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.381662] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.404404] Freeing unused kernel image (initmem) memory: 2984K
[ 1.406846] Write protecting the kernel read-only data: 26624k
[ 1.418904] Freeing unused kernel image (text/rodata gap) memory: 1812K
[ 1.420941] Freeing unused kernel image (rodata/data gap) memory: 596K
[ 1.423101] rodata_test: all tests were successful
[ 1.425577] Run /init as init process
[ 1.447138] Alpine Init 3.13.0-r0
Alpine Init 3.13[ 1.450032] Loading boot drivers...
.0-r0
* Loading boot drivers: [ 1.509401] ACPI: bus type USB registered
[ 1.513387] usbcore: registered new interface driver usbfs
[ 1.516409] usbcore: registered new interface driver hub
[ 1.518377] usbcore: registered new device driver usb
[ 1.529057] usbcore: registered new interface driver usb-storage
[ 1.666189] loop: module loaded
[ 1.730863] ACPI: bus type drm_connector registered
[ 1.764093] Loading boot drivers: ok.
ok.
[ 1.766529] Mounting root...
* Mounting root: [ 1.806098] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.807542] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.841527] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.842326] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.846836] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.875794] Console: switching to colour frame buffer device 160x50
[ 1.878943] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.926398] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.927886] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.016946] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 2.023013] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 2.100297] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 2.104899] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 2.360042] block sr0: the capability attribute has been deprecated.
[ 3.361743] EXT4-fs (vda): mounted filesystem 72d42021-766d-43de-893f-bc82cd7d77a0 ro with ordered data mode. Quota mode: none.
[ 3.366929] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.63 is starting up Linux 6.18.1-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
[ 4.514394] random: crng init done
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting trace filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Mounting bpf filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5520/51200 files, 171668/204800 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 25.3 running 'init-local' at Sat, 10 Jan 2026 21:11:58 +0000. Up 6.86 seconds.
[ ok ]
* Setting hostname to localhost from /etc/hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.3.0 starting
DUID 00:01:00:01:30:f5:7d:1f:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::e3c7:3f24:ad79:d120/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 25.3 running 'init' at Sat, 10 Jan 2026 21:12:12 +0000. Up 20.30 seconds.
ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::e3c7:3f24:ad79:d120/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:P3LJwmcvFO+V8eBZtFnF4uAw4EIaMJHz1o/sFhPHaNA root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| ++... .. .o|
| o..+E. o . . +|
| o.o.o. + o o+|
| o =.o . . +o.|
| . o =S o . B |
| =..o... = .|
| . o+.O. . |
| o *.o. |
| . .. |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:ZrVEGSVL4mqz6hbItOMMhNc6FpV2up4Um9dXLgd63/E root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| . . =+. |
| + .. +.o |
|. + o . + |
|..+ + . o... |
|.+ = =+.S..+ |
|. O *..=o + o . |
| = = +. o + . o |
| o +. . . E|
| oo |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:+09M7JlAs/IVEFdprsfGw5rQUpS2nna8IoIJg7xYh4U root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| o..o.. |
| o+ o |
| . oo.+ |
| E . . +o.. |
| . + S o++B |
| = + +o**oX |
| o o o o. .+** o |
|. . o ....+ . |
| ..o.. |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 25.3 running 'modules:config' at Sat, 10 Jan 2026 21:12:13 +0000. Up 21.52 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 25.3 running 'modules:final' at Sat, 10 Jan 2026 21:12:13 +0000. Up 22.04 seconds.
(1/1) Installing ca-certificates (20251003-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20251003-r0.trigger
OK: 136.1 MiB in 208 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
2026-01-10 21:12:15,579 - cc_keys_to_console.py[WARNING]: Unable to activate module keys_to_console, helper tool not found at /usr/lib/cloud-init/write-ssh-key-fingerprints
Cloud-init v. 25.3 finished at Sat, 10 Jan 2026 21:12:15 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 23.77 seconds
[ ok ]
Welcome to Alpine Linux 3.23
Kernel 6.18.1-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
..........status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
(1/2) Upgrading linux-pam (1.7.1-r1 -> 1.7.1-r2)
Installing file to etc/environment.apk-new
(2/2) Upgrading linux-virt (6.18.1-r0 -> 6.18.4-r0)
Executing busybox-1.37.0-r30.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.13.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.4-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 136.2 MiB in 208 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/10) Installing c-ares (1.34.6-r0)
( 2/10) Installing nghttp2-libs (1.68.0-r0)
( 3/10) Installing nghttp3 (1.13.1-r0)
( 4/10) Installing libpsl (0.21.5-r3)
( 5/10) Installing libcurl (8.17.0-r1)
( 6/10) Installing pcre2 (10.47-r0)
( 7/10) Installing git (2.52.0-r0)
( 8/10) Installing git-init-template (2.52.0-r0)
( 9/10) Installing gnu-libiconv-libs (1.18-r0)
(10/10) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r30.trigger
OK: 145.8 MiB in 218 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/acid.git acid
Cloning into 'acid'...
remote: Enumerating objects: 133, done.
remote: Counting objects: 100% (133/133), done.
remote: Compressing objects: 100% (132/132), done.
remote: Total 133 (delta 83), reused 0 (delta 0), pack-reused 0 (from 0)
Receiving objects: 100% (133/133), 65.50 KiB | 5.46 MiB/s, done.
Resolving deltas: 100% (83/83), done.
+ cd acid
+ git -c 'advice.detachedHead=false' checkout 86c8f3ddf20898c29c41ba54e0158c3c5a27c344
HEAD is now at 86c8f3d Bump dependencies
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=86c8f3d
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/86c8f3d/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base go asciidoctor
( 1/22) Installing ruby-libs (3.4.8-r0)
( 2/22) Installing libucontext (1.3.3-r0)
( 3/22) Installing ruby (3.4.8-r0)
( 4/22) Installing asciidoctor (2.0.26-r0)
( 5/22) Installing jansson (2.14.1-r0)
( 6/22) Installing binutils (2.45.1-r0)
( 7/22) Installing libmagic (5.46-r2)
( 8/22) Installing file (5.46-r2)
( 9/22) Installing libgomp (15.2.0-r2)
(10/22) Installing libatomic (15.2.0-r2)
(11/22) Installing isl26 (0.26-r1)
(12/22) Installing mpfr4 (4.2.2-r0)
(13/22) Installing mpc1 (1.3.1-r1)
(14/22) Installing gcc (15.2.0-r2)
(15/22) Installing libstdc++-dev (15.2.0-r2)
(16/22) Installing musl-dev (1.2.5-r21)
(17/22) Installing g++ (15.2.0-r2)
(18/22) Installing make (4.4.1-r3)
(19/22) Installing fortify-headers (1.1-r5)
(20/22) Installing patch (2.8-r0)
(21/22) Installing build-base (0.5-r3)
(22/22) Installing go (1.25.5-r0)
Executing busybox-1.37.0-r30.trigger
OK: 580.0 MiB in 240 packages
+ make all test
go build -ldflags "-X 'main.projectVersion=dev'" -o acid
go: downloading github.com/mattn/go-sqlite3 v1.14.33
go: downloading github.com/pkg/sftp v1.13.10
go: downloading golang.org/x/crypto v0.46.0
go: downloading gopkg.in/yaml.v3 v3.0.1
go: downloading github.com/kr/fs v0.1.0
asciidoctor -b manpage -a release-version=dev -o acid.1 acid.adoc || \
a2x -d manpage -f manpage -a release-version=dev acid.adoc
go test
PASS
ok janouch.name/acid 0.002s
Deploy log