- Created
- 29d ago
- Changed
- 29d ago
- Project
- p/liberty
- Commit
- d7c70bd43ab607f9e73653d417ff0fcef2ad2b8a
- Runner
- Alpine 3.23
- State
- Success
- Notified
- 1
- Duration
- 1m34s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.7-0-virt (buildozer@build-3-23-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-01-26 18:22:53
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000018] kvm-clock: using sched offset of 10870576368 cycles
[ 0.000020] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000022] tsc: Detected 3096.002 MHz processor
[ 0.000475] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000501] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000503] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000537] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007082] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007188] RAMDISK: [mem 0x7f652000-0x7fffffff]
[ 0.007189] ACPI: Early table checksum verification disabled
[ 0.007191] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007194] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007198] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007203] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007205] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007207] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007210] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007212] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007214] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007215] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007215] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007216] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007216] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007217] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.007660] No NUMA configuration found
[ 0.007661] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.007664] NODE_DATA(0) allocated [mem 0x13fffbd40-0x13fffffff]
[ 0.007771] Zone ranges:
[ 0.007772] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007773] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007774] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007775] Movable zone start for each node
[ 0.007775] Early memory node ranges
[ 0.007776] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.007777] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.007777] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007778] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.007864] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007875] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013369] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.014017] ACPI: PM-Timer IO Port: 0x608
[ 0.014031] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.014064] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.014067] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014068] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.014069] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014070] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.014070] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.014074] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.014075] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014082] CPU topo: Max. logical packages: 1
[ 0.014082] CPU topo: Max. logical dies: 1
[ 0.014083] CPU topo: Max. dies per package: 1
[ 0.014086] CPU topo: Max. threads per core: 1
[ 0.014087] CPU topo: Num. cores per package: 4
[ 0.014087] CPU topo: Num. threads per package: 4
[ 0.014087] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.014102] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.014113] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.014114] Booting paravirtualized kernel on KVM
[ 0.014115] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.017628] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.017822] percpu: Embedded 55 pages/cpu s185240 r8192 d31848 u524288
[ 0.017845] kvm-guest: PV spinlocks disabled, no host support
[ 0.017846] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.017885] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.017888] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.018210] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.018370] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.018448] software IO TLB: area num 4.
[ 0.029523] Fallback order for Node 0: 0
[ 0.029527] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.029528] Policy zone: Normal
[ 0.029723] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.041172] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.041236] Kernel/User page tables isolation: enabled
[ 0.041946] Dynamic Preempt: none
[ 0.042093] rcu: Preemptible hierarchical RCU implementation.
[ 0.042094] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.042095] Trampoline variant of Tasks RCU enabled.
[ 0.042095] Tracing variant of Tasks RCU enabled.
[ 0.042096] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.042096] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.042103] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.042104] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.046185] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.046392] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.046540] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.053616] Console: colour VGA+ 80x25
[ 0.053668] printk: legacy console [ttyS0] enabled
[ 0.214864] ACPI: Core revision 20250807
[ 0.215974] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.218133] APIC: Switch to symmetric I/O mode setup
[ 0.219514] x2apic enabled
[ 0.220387] APIC: Switched APIC routing to: physical x2apic
[ 0.222730] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.224092] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca086da2ab, max_idle_ns: 440795258116 ns
[ 0.226537] Calibrating delay loop (skipped) preset value.. 6192.00 BogoMIPS (lpj=3096002)
[ 0.227620] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.228537] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.229539] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.230537] Speculative Store Bypass: Vulnerable
[ 0.231537] Spectre V2 : Mitigation: Retpolines
[ 0.232537] ITS: Mitigation: Aligned branch/return thunks
[ 0.233537] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.234537] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.235537] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.236538] active return thunk: its_return_thunk
[ 0.237538] x86/fpu: x87 FPU will use FXSAVE
[ 0.253619] Freeing SMP alternatives memory: 40K
[ 0.254540] pid_max: default: 32768 minimum: 301
[ 0.255852] LSM: initializing lsm=lockdown,capability,landlock
[ 0.257836] landlock: Up and running.
[ 0.258657] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.259539] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.364533] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.364749] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.365562] signal: max sigframe size: 1440
[ 0.366573] rcu: Hierarchical SRCU implementation.
[ 0.367536] rcu: Max phase no-delay instances is 400.
[ 0.368579] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.372684] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.373583] smp: Bringing up secondary CPUs ...
[ 0.374633] smpboot: x86: Booting SMP configuration:
[ 0.375539] .... node #0, CPUs: #1 #2 #3
[ 0.380654] smp: Brought up 1 node, 4 CPUs
[ 0.382538] smpboot: Total of 4 processors activated (24768.01 BogoMIPS)
[ 0.383695] Memory: 3999892K/4193760K available (14578K kernel code, 2022K rwdata, 9648K rodata, 2988K init, 1224K bss, 188732K reserved, 0K cma-reserved)
[ 0.385674] devtmpfs: initialized
[ 0.386308] x86/mm: Memory block size: 128MB
[ 0.387940] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.388543] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.389545] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.391774] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.392642] audit: initializing netlink subsys (disabled)
[ 0.393558] audit: type=2000 audit(1779735408.448:1): state=initialized audit_enabled=0 res=1
[ 0.393588] thermal_sys: Registered thermal governor 'step_wise'
[ 0.394550] cpuidle: using governor ladder
[ 0.396541] cpuidle: using governor menu
[ 0.397564] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.398799] PCI: Using configuration type 1 for base access
[ 0.400593] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.401579] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.402537] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.404722] ACPI: Added _OSI(Module Device)
[ 0.405537] ACPI: Added _OSI(Processor Device)
[ 0.406536] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.408624] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.410651] ACPI: Interpreter enabled
[ 0.411544] ACPI: PM: (supports S0 S3 S5)
[ 0.412536] ACPI: Using IOAPIC for interrupt routing
[ 0.413548] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.414537] PCI: Using E820 reservations for host bridge windows
[ 0.415614] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.418950] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.420540] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.422537] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.424543] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.426845] acpiphp: Slot [3] registered
[ 0.427558] acpiphp: Slot [4] registered
[ 0.428557] acpiphp: Slot [5] registered
[ 0.429557] acpiphp: Slot [6] registered
[ 0.430556] acpiphp: Slot [7] registered
[ 0.431478] acpiphp: Slot [8] registered
[ 0.432557] acpiphp: Slot [9] registered
[ 0.433558] acpiphp: Slot [10] registered
[ 0.434557] acpiphp: Slot [11] registered
[ 0.435557] acpiphp: Slot [12] registered
[ 0.436556] acpiphp: Slot [13] registered
[ 0.437557] acpiphp: Slot [14] registered
[ 0.438557] acpiphp: Slot [15] registered
[ 0.439424] acpiphp: Slot [16] registered
[ 0.439559] acpiphp: Slot [17] registered
[ 0.440557] acpiphp: Slot [18] registered
[ 0.441558] acpiphp: Slot [19] registered
[ 0.442518] acpiphp: Slot [20] registered
[ 0.443556] acpiphp: Slot [21] registered
[ 0.444556] acpiphp: Slot [22] registered
[ 0.445556] acpiphp: Slot [23] registered
[ 0.446557] acpiphp: Slot [24] registered
[ 0.447559] acpiphp: Slot [25] registered
[ 0.448556] acpiphp: Slot [26] registered
[ 0.449436] acpiphp: Slot [27] registered
[ 0.449556] acpiphp: Slot [28] registered
[ 0.450556] acpiphp: Slot [29] registered
[ 0.451557] acpiphp: Slot [30] registered
[ 0.452462] acpiphp: Slot [31] registered
[ 0.453552] PCI host bridge to bus 0000:00
[ 0.454539] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.455537] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.457537] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.459537] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.460537] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.462537] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.463596] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.466112] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.469106] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.471597] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.473597] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.474537] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.476537] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.477538] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.478819] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.481176] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.483550] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.484913] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.493581] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.495562] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.496598] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.497698] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.501022] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.504286] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.505551] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.507604] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.508550] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.511633] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.514963] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.516550] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.517588] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.520758] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.527537] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.529551] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.530598] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.533540] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.535666] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.536613] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.538687] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.539623] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.541946] iommu: Default domain type: Translated
[ 0.542536] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.544702] SCSI subsystem initialized
[ 0.545615] pps_core: LinuxPPS API ver. 1 registered
[ 0.546541] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.548541] PTP clock support registered
[ 0.549745] PCI: Using ACPI for IRQ routing
[ 0.551580] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.552626] clocksource: Switched to clocksource kvm-clock
[ 0.554289] VFS: Disk quotas dquot_6.6.0
[ 0.555125] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.556776] pnp: PnP ACPI init
[ 0.557891] pnp: PnP ACPI: found 6 devices
[ 0.565317] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.567355] NET: Registered PF_INET protocol family
[ 0.568666] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.578759] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.580992] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.582714] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.584467] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.586197] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.587861] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.589473] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.590919] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.592506] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.593695] NET: Registered PF_XDP protocol family
[ 0.594723] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.596025] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.597323] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.598760] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.600205] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.601721] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.602968] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.604322] PCI: CLS 0 bytes, default 64
[ 0.605168] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.605237] Unpacking initramfs...
[ 0.606570] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.606608] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca086da2ab, max_idle_ns: 440795258116 ns
[ 0.611788] Initialise system trusted keyrings
[ 0.612964] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.614573] Key type asymmetric registered
[ 0.615505] Asymmetric key parser 'x509' registered
[ 0.616623] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.618483] io scheduler mq-deadline registered
[ 0.619504] io scheduler kyber registered
[ 0.620545] io scheduler bfq registered
[ 0.622965] ERST DBG: ERST support is disabled.
[ 0.624590] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.627898] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.641330] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.644608] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.646422] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.648892] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.650791] scsi host0: ata_piix
[ 0.651758] scsi host1: ata_piix
[ 0.652525] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.654151] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.655931] hv_vmbus: registering driver hv_netvsc
[ 0.657339] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.660013] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.661299] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.662503] hv_vmbus: registering driver hyperv_keyboard
[ 0.663685] rtc_cmos 00:05: RTC can wake from S4
[ 0.665425] rtc_cmos 00:05: registered as rtc0
[ 0.666549] rtc_cmos 00:05: setting system clock to 2026-05-25T18:56:48 UTC (1779735408)
[ 0.668472] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.670179] intel_pstate: CPU model not supported
[ 0.671513] gre: GRE over IPv4 demultiplexer driver
[ 0.672778] NET: Registered PF_INET6 protocol family
[ 0.674247] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.674451] Segment Routing with IPv6
[ 0.677358] In-situ OAM (IOAM) with IPv6
[ 0.678627] Key type dns_resolver registered
[ 0.679807] IPI shorthand broadcast: enabled
[ 0.682815] Freeing initrd memory: 9912K
[ 0.683457] sched_clock: Marking stable (508060780, 175136398)->(706426936, -23229758)
[ 0.686613] registered taskstats version 1
[ 0.687827] Loading compiled-in X.509 certificates
[ 0.692556] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.696596] Demotion targets for Node 0: null
[ 0.697986] Key type .fscrypt registered
[ 0.698893] Key type fscrypt-provisioning registered
[ 0.815185] ata2: found unknown device (class 0)
[ 0.820336] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.826669] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.855935] Freeing unused kernel image (initmem) memory: 2988K
[ 0.859135] Write protecting the kernel read-only data: 26624k
[ 0.865200] Freeing unused kernel image (text/rodata gap) memory: 1804K
[ 0.869106] Freeing unused kernel image (rodata/data gap) memory: 592K
[ 0.872529] rodata_test: all tests were successful
[ 0.875130] Run /init as init process
[ 0.890748] Alpine Init 3.13.0-r0
Alpine Init 3.13.0-r0
[ 0.893742] Loading boot drivers...
* Loading boot drivers: [ 0.925541] ACPI: bus type USB registered
[ 0.926469] usbcore: registered new interface driver usbfs
[ 0.927592] usbcore: registered new interface driver hub
[ 0.928616] usbcore: registered new device driver usb
[ 0.932869] usbcore: registered new interface driver usb-storage
[ 0.978818] loop: module loaded
[ 1.006240] ACPI: bus type drm_connector registered
[ 1.025385] Loading boot drivers: ok.
ok.
[ 1.027683] Mounting root...
* Mounting root: [ 1.042935] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.044120] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.049569] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.050348] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.051636] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.065719] Console: switching to colour frame buffer device 160x50
[ 1.067988] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.097158] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.098120] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.133202] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.136589] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.143229] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.146473] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.188873] block sr0: the capability attribute has been deprecated.
[ 1.923723] EXT4-fs (vda): mounted filesystem 325df078-35f9-4b5e-a95e-82778457688f ro with ordered data mode. Quota mode: none.
[ 1.931504] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.63 is starting up Linux 6.18.7-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
[ 2.438176] random: crng init done
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting trace filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Mounting bpf filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5520/51200 files, 171729/204800 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 25.3 running 'init-local' at Mon, 25 May 2026 18:56:50 +0000. Up 3.56 seconds.
[ ok ]
* Setting hostname to localhost from /etc/hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.3.0 starting
DUID 00:01:00:01:31:a7:57:f3:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::8436:772a:5772:c164/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 25.3 running 'init' at Mon, 25 May 2026 18:57:03 +0000. Up 16.63 seconds.
ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::8436:772a:5772:c164/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:/Zrwi6fAb3aNt49xMCzbEX5zrZjDMzOf8Rbv7WFTXec root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| |
| |
| . o|
| . o . .=|
| S o * o E|
| . * B =.|
| o . .o& ++o|
| oo++oo@.+*|
| o++=ooo++=|
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:VyCJGwIP0lrYpi2WirNIQIF77Wx6kpASWCl1Hf/J1/c root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
|o*=o...o... |
|+oB+. +... . |
|oX.... o. . |
|Ooo . . o o . |
|== o S = . . .|
|B. + . . ..|
|++ + E|
|o + . |
| o |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:sAfYoYnUBpcRqG/oyWCl4rKexQj85gYFdlqTKH/sfhg root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| ++=+. |
|.=.B+= . |
|oo*o= + |
|o..oo + |
|.++o . S |
|=+* E . |
|Boo* o |
|.==.o . |
|++.. . |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 25.3 running 'modules:config' at Mon, 25 May 2026 18:57:05 +0000. Up 17.89 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 25.3 running 'modules:final' at Mon, 25 May 2026 18:57:05 +0000. Up 18.39 seconds.
(1/1) Installing ca-certificates (20260413-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20260413-r0.trigger
OK: 136.2 MiB in 208 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
2026-05-25 18:57:07,421 - cc_keys_to_console.py[WARNING]: Unable to activate module keys_to_console, helper tool not found at /usr/lib/cloud-init/write-ssh-key-fingerprints
Cloud-init v. 25.3 finished at Mon, 25 May 2026 18:57:07 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 20.11 seconds
[ ok ]
Welcome to Alpine Linux 3.23
Kernel 6.18.7-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.3-r1 -> 3.0.6-r0)
(2/2) Upgrading apk-tools (3.0.3-r1 -> 3.0.6-r0)
Executing busybox-1.37.0-r30.trigger
Continuing with the main upgrade transaction:
( 1/33) Upgrading alpine-baselayout-data (3.7.1-r8 -> 3.7.2-r0)
Installing file to etc/fstab.apk-new
Installing file to etc/group.apk-new
Installing file to etc/hostname.apk-new
Installing file to etc/inittab.apk-new
Installing file to etc/passwd.apk-new
Installing file to etc/profile.apk-new
Installing file to etc/shadow.apk-new
( 2/33) Upgrading musl (1.2.5-r21 -> 1.2.5-r23)
( 3/33) Upgrading alpine-baselayout (3.7.1-r8 -> 3.7.2-r0)
Executing alpine-baselayout-3.7.2-r0.pre-upgrade
Installing file to etc/motd.apk-new
Executing alpine-baselayout-3.7.2-r0.post-upgrade
( 4/33) Upgrading libcap2 (2.77-r0 -> 2.78-r0)
( 5/33) Upgrading alpine-release (3.23.3-r0 -> 3.23.4-r0)
( 6/33) Upgrading libcrypto3 (3.5.5-r0 -> 3.5.6-r0)
( 7/33) Upgrading libssl3 (3.5.5-r0 -> 3.5.6-r0)
( 8/33) Upgrading zlib (1.3.1-r2 -> 1.3.2-r0)
( 9/33) Upgrading ca-certificates-bundle (20251003-r0 -> 20260413-r0)
Installing file to etc/ssl/certs/ca-certificates.crt.apk-new
(10/33) Upgrading musl-utils (1.2.5-r21 -> 1.2.5-r23)
(11/33) Upgrading alpine-base (3.23.3-r0 -> 3.23.4-r0)
(12/33) Upgrading gnutls (3.8.11-r0 -> 3.8.13-r0)
(13/33) Upgrading chrony (4.8-r1 -> 4.8-r2)
Executing chrony-4.8-r2.pre-upgrade
(14/33) Upgrading chrony-openrc (4.8-r1 -> 4.8-r2)
(15/33) Upgrading libblkid (2.41.2-r0 -> 2.41.4-r0)
(16/33) Upgrading blkid (2.41.2-r0 -> 2.41.4-r0)
(17/33) Upgrading libsmartcols (2.41.2-r0 -> 2.41.4-r0)
(18/33) Upgrading partx (2.41.2-r0 -> 2.41.4-r0)
(19/33) Upgrading libuuid (2.41.2-r0 -> 2.41.4-r0)
(20/33) Upgrading libfdisk (2.41.2-r0 -> 2.41.4-r0)
(21/33) Upgrading sfdisk (2.41.2-r0 -> 2.41.4-r0)
(22/33) Upgrading libexpat (2.7.3-r0 -> 2.7.5-r0)
(23/33) Upgrading xz-libs (5.8.2-r0 -> 5.8.3-r0)
(24/33) Upgrading python3 (3.12.12-r0 -> 3.12.13-r0)
(25/33) Upgrading python3-pycache-pyc0 (3.12.12-r0 -> 3.12.13-r0)
(26/33) Upgrading pyc (3.12.12-r0 -> 3.12.13-r0)
(27/33) Upgrading python3-pyc (3.12.12-r0 -> 3.12.13-r0)
(28/33) Upgrading py3-requests (2.32.5-r0 -> 2.33.1-r0)
(29/33) Upgrading py3-requests-pyc (2.32.5-r0 -> 2.33.1-r0)
(30/33) Upgrading tzdata (2025c-r0 -> 2026b-r0)
(31/33) Upgrading linux-virt (6.18.7-r0 -> 6.18.33-r0)
(32/33) Upgrading libmount (2.41.2-r0 -> 2.41.4-r0)
(33/33) Upgrading mount (2.41.2-r0 -> 2.41.4-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20260413-r0.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.13.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.33-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 136.7 MiB in 208 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/9) Installing c-ares (1.34.6-r0)
(2/9) Installing nghttp2-libs (1.69.0-r0)
(3/9) Installing libpsl (0.21.5-r3)
(4/9) Installing libcurl (8.19.0-r0)
(5/9) Installing pcre2 (10.47-r0)
(6/9) Installing git (2.52.0-r0)
(7/9) Installing git-init-template (2.52.0-r0)
(8/9) Installing gnu-libiconv-libs (1.18-r0)
(9/9) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r30.trigger
OK: 146.1 MiB in 217 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/liberty.git liberty
Cloning into 'liberty'...
remote: Enumerating objects: 907, done.
remote: Counting objects: 100% (376/376), done.
remote: Compressing objects: 100% (373/373), done.
remote: Total 907 (delta 238), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (907/907), 444.11 KiB | 17.76 MiB/s, done.
Resolving deltas: 100% (559/559), done.
+ cd liberty
+ git -c 'advice.detachedHead=false' checkout d7c70bd43ab607f9e73653d417ff0fcef2ad2b8a
HEAD is now at d7c70bd liberty-xui: add AppKit support
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=d7c70bd
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/d7c70bd/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake openssl-dev pulseaudio-dev go nodejs
( 1/91) Installing jansson (2.14.1-r0)
( 2/91) Installing binutils (2.45.1-r0)
( 3/91) Installing libmagic (5.46-r2)
( 4/91) Installing file (5.46-r2)
( 5/91) Installing libgomp (15.2.0-r2)
( 6/91) Installing libatomic (15.2.0-r2)
( 7/91) Installing isl26 (0.26-r1)
( 8/91) Installing mpfr4 (4.2.2-r0)
( 9/91) Installing mpc1 (1.3.1-r1)
(10/91) Installing gcc (15.2.0-r2)
(11/91) Installing libstdc++-dev (15.2.0-r2)
(12/91) Installing musl-dev (1.2.5-r23)
(13/91) Installing g++ (15.2.0-r2)
(14/91) Installing make (4.4.1-r3)
(15/91) Installing fortify-headers (1.1-r5)
(16/91) Installing patch (2.8-r0)
(17/91) Installing build-base (0.5-r3)
(18/91) Installing acl-libs (2.3.2-r1)
(19/91) Installing lz4-libs (1.10.0-r0)
(20/91) Installing libarchive (3.8.5-r0)
(21/91) Installing rhash-libs (1.4.6-r0)
(22/91) Installing libuv (1.51.0-r0)
(23/91) Installing cmake (4.1.3-r0)
(24/91) Installing go (1.25.10-r0)
(25/91) Installing ada-libs (3.3.0-r0)
(26/91) Installing icu-data-en (76.1-r1)
Executing icu-data-en-76.1-r1.post-install
*
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
*
(27/91) Installing icu-libs (76.1-r1)
(28/91) Installing simdjson (3.12.0-r0)
(29/91) Installing simdutf (7.5.0-r1)
(30/91) Installing nodejs (24.14.1-r0)
(31/91) Installing pkgconf (2.5.1-r0)
(32/91) Installing openssl-dev (3.5.6-r0)
(33/91) Installing libintl (0.24.1-r1)
(34/91) Installing glib (2.86.3-r0)
(35/91) Installing libxau (1.0.12-r0)
(36/91) Installing libxdmcp (1.1.5-r1)
(37/91) Installing libxcb (1.17.0-r1)
(38/91) Installing libx11 (1.8.12-r1)
(39/91) Installing libasyncns (0.8-r4)
(40/91) Installing dbus-libs (1.16.2-r1)
(41/91) Installing libltdl (2.5.4-r2)
(42/91) Installing orc (0.4.41-r0)
(43/91) Installing libogg (1.3.6-r0)
(44/91) Installing libflac (1.4.3-r2)
(45/91) Installing alsa-lib (1.2.14-r2)
(46/91) Installing lame-libs (3.100-r5)
(47/91) Installing mpg123-libs (1.33.3-r0)
(48/91) Installing opus (1.5.2-r1)
(49/91) Installing libvorbis (1.3.7-r2)
(50/91) Installing libsndfile (1.2.2-r2)
(51/91) Installing soxr (0.1.3-r7)
(52/91) Installing speexdsp (1.2.1-r2)
(53/91) Installing tdb-libs (1.4.14-r0)
(54/91) Installing libpulse (17.0-r5)
(55/91) Installing libpulse-mainloop-glib (17.0-r5)
(56/91) Installing bzip2-dev (1.0.8-r6)
(57/91) Installing libxml2 (2.13.9-r0)
(58/91) Installing libxml2-utils (2.13.9-r0)
(59/91) Installing docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.post-install
(60/91) Installing libxslt (1.1.43-r3)
(61/91) Installing docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.post-install
(62/91) Installing docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.post-install
(63/91) Installing docbook-xsl (1.79.2-r13)
(64/91) Installing xz (5.8.3-r0)
(65/91) Installing gettext-asprintf (0.24.1-r1)
(66/91) Installing gettext-libs (0.24.1-r1)
(67/91) Installing gettext-envsubst (0.24.1-r1)
(68/91) Installing gettext (0.24.1-r1)
(69/91) Installing gettext-dev (0.24.1-r1)
(70/91) Installing py3-parsing (3.2.5-r0)
(71/91) Installing py3-parsing-pyc (3.2.5-r0)
(72/91) Installing py3-packaging (25.0-r0)
(73/91) Installing py3-packaging-pyc (25.0-r0)
(74/91) Installing linux-headers (6.16.12-r0)
(75/91) Installing libffi-dev (3.5.2-r0)
(76/91) Installing bsd-compat-headers (0.7.2-r6)
(77/91) Installing libformw (6.5_p20251123-r0)
(78/91) Installing libmenuw (6.5_p20251123-r0)
(79/91) Installing libncurses++ (6.5_p20251123-r0)
(80/91) Installing ncurses-dev (6.5_p20251123-r0)
(81/91) Installing libedit-dev (20251016.3.1-r0)
(82/91) Installing zlib-dev (1.3.2-r0)
(83/91) Installing libpcre2-16 (10.47-r0)
(84/91) Installing libpcre2-32 (10.47-r0)
(85/91) Installing pcre2-dev (10.47-r0)
(86/91) Installing liblastlog2 (2.41.4-r0)
(87/91) Installing sqlite (3.51.2-r0)
(88/91) Installing sqlite-dev (3.51.2-r0)
(89/91) Installing util-linux-dev (2.41.4-r0)
(90/91) Installing glib-dev (2.86.3-r0)
(91/91) Installing pulseaudio-dev (17.0-r5)
Executing busybox-1.37.0-r30.trigger
Executing glib-2.86.3-r0.trigger
* No schema files found: doing nothing.
OK: 758.3 MiB in 308 packages
+ doas apk add --no-interactive lua5.4-dev ncurses-dev
(1/3) Installing lua5.4-libs (5.4.8-r0)
(2/3) Installing lua5.4 (5.4.8-r0)
(3/3) Installing lua5.4-dev (5.4.8-r0)
Executing busybox-1.37.0-r30.trigger
OK: 760.2 MiB in 311 packages
+ cmake -B build
-- The C compiler identification is GNU 15.2.0
-- The CXX compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for modules 'libssl;libcrypto'
-- Found libssl, version 3.5.6
-- Found libcrypto, version 3.5.6
-- Checking for module 'libpulse'
-- Found libpulse, version 17.0
CMake Warning at CMakeLists.txt:135 (message):
Cannot test generated protocol code for Swift
-- Configuring done (0.5s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build
+ cmake --build build
[ 4%] Building C object CMakeFiles/test-liberty.dir/tests/liberty.c.o
In file included from /home/ci/liberty/tests/liberty.c:25:
/home/ci/liberty/tests/../liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 9%] Linking C executable test-liberty
[ 9%] Built target test-liberty
[ 14%] Building C object CMakeFiles/test-proto.dir/tests/proto.c.o
In file included from /home/ci/liberty/tests/proto.c:34:
/home/ci/liberty/tests/../liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
/home/ci/liberty/tests/proto.c: In function 'test_irc':
/home/ci/liberty/tests/../liberty.c:236:29: warning: right-hand operand of comma expression has no effect [-Wunused-value]
236 | ((condition) ? true : \
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
237 | (assertion_failure_handler (g_soft_asserts_are_deadly, \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
238 | __FILE__, __LINE__, __func__, #condition), false))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ci/liberty/tests/proto.c:56:25: note: in expansion of macro 'soft_assert'
56 | soft_assert (!"found unexpected message tag");
| ^~~~~~~~~~~
[ 19%] Linking C executable test-proto
[ 19%] Built target test-proto
[ 23%] Building C object CMakeFiles/test-xdg.dir/tests/xdg.c.o
In file included from /home/ci/liberty/tests/xdg.c:22:
/home/ci/liberty/tests/../liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 28%] Linking C executable test-xdg
[ 28%] Built target test-xdg
[ 33%] Building C object CMakeFiles/test-pulse.dir/tests/pulse.c.o
In file included from /home/ci/liberty/tests/pulse.c:24:
/home/ci/liberty/tests/../liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 38%] Linking C executable test-pulse
[ 38%] Built target test-pulse
[ 42%] Generating man page for libertyxdr
[ 42%] Built target docs
[ 47%] Generating test protocol code (c)
[ 52%] Generating test protocol code (cpp)
[ 57%] Generating test protocol code (go)
[ 61%] Generating test protocol code (mjs)
[ 66%] Generating test protocol code (swift)
[ 66%] Built target test-lxdrgen-outputs
[ 71%] Building C object CMakeFiles/test-lxdrgen-c.dir/tests/lxdrgen.c.o
In file included from /home/ci/liberty/tests/lxdrgen.c:22:
/home/ci/liberty/tests/../liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 76%] Linking C executable test-lxdrgen-c
[ 80%] Built target test-lxdrgen-c
[ 85%] Building CXX object CMakeFiles/test-lxdrgen-cpp.dir/tests/lxdrgen.cpp.o
[ 90%] Building CXX object CMakeFiles/test-lxdrgen-cpp.dir/tools/lxdrgen-cpp-posix.cpp.o
[ 95%] Linking CXX executable test-lxdrgen-cpp
[100%] Built target test-lxdrgen-cpp
+ cmake --build build -- test
Running tests...
Test project /home/ci/liberty/build
Start 1: test-liberty
1/10 Test #1: test-liberty ..................... Passed 0.01 sec
Start 2: test-proto
2/10 Test #2: test-proto ....................... Passed 0.00 sec
Start 3: test-xdg
3/10 Test #3: test-xdg ......................... Passed 0.00 sec
Start 4: test-pulse
4/10 Test #4: test-pulse ....................... Passed 0.00 sec
Start 5: test-help2adoc
5/10 Test #5: test-help2adoc ................... Passed 0.03 sec
Start 6: test-cmake-parser
6/10 Test #6: test-cmake-parser ................ Passed 0.04 sec
Start 7: test-lxdrgen-c
7/10 Test #7: test-lxdrgen-c ................... Passed 0.00 sec
Start 8: test-lxdrgen-cpp
8/10 Test #8: test-lxdrgen-cpp ................. Passed 0.00 sec
Start 9: test-lxdrgen-go
9/10 Test #9: test-lxdrgen-go .................. Passed 4.21 sec
Start 10: test-lxdrgen-mjs
10/10 Test #10: test-lxdrgen-mjs ................. Passed 0.04 sec
100% tests passed, 0 tests failed out of 10
Total Test time (real) = 4.35 sec
+ cmake -B build-wdye54 -S tools/wdye
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Curses: /usr/lib/libcurses.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (0.3s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build-wdye54
+ cmake --build build-wdye54
[ 50%] Building C object CMakeFiles/wdye.dir/wdye.c.o
[100%] Linking C executable wdye
[100%] Built target wdye
+ cmake --build build-wdye54 -- test
Running tests...
Test project /home/ci/liberty/build-wdye54
Start 1: wdye
1/1 Test #1: wdye ............................. Passed 0.50 sec
100% tests passed, 0 tests failed out of 1
Total Test time (real) = 0.50 sec
+ doas apk del --no-interactive lua5.4-dev
(1/3) Purging lua5.4-dev (5.4.8-r0)
(2/3) Purging lua5.4 (5.4.8-r0)
(3/3) Purging lua5.4-libs (5.4.8-r0)
Executing busybox-1.37.0-r30.trigger
OK: 758.3 MiB in 308 packages
+ doas apk add --no-interactive lua5.3-dev
(1/4) Installing linenoise (1.0-r5)
(2/4) Installing lua5.3-libs (5.3.6-r6)
(3/4) Installing lua5.3 (5.3.6-r6)
(4/4) Installing lua5.3-dev (5.3.6-r6)
Executing busybox-1.37.0-r30.trigger
OK: 759.9 MiB in 312 packages
+ cmake -B build-wdye53 -S tools/wdye
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Curses: /usr/lib/libcurses.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (0.2s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build-wdye53
+ cmake --build build-wdye53
[ 50%] Building C object CMakeFiles/wdye.dir/wdye.c.o
[100%] Linking C executable wdye
[100%] Built target wdye
+ cmake --build build-wdye53 -- test
Running tests...
Test project /home/ci/liberty/build-wdye53
Start 1: wdye
1/1 Test #1: wdye ............................. Passed 0.50 sec
100% tests passed, 0 tests failed out of 1
Total Test time (real) = 0.51 sec
+ doas apk del --no-interactive --rdepends ncurses-dev
( 1/59) Purging py3-packaging-pyc (25.0-r0)
( 2/59) Purging py3-parsing-pyc (3.2.5-r0)
( 3/59) Purging pulseaudio-dev (17.0-r5)
( 4/59) Purging libpulse-mainloop-glib (17.0-r5)
( 5/59) Purging libpulse (17.0-r5)
( 6/59) Purging libsndfile (1.2.2-r2)
( 7/59) Purging alsa-lib (1.2.14-r2)
( 8/59) Purging glib-dev (2.86.3-r0)
( 9/59) Purging bzip2-dev (1.0.8-r6)
(10/59) Purging docbook-xsl (1.79.2-r13)
(11/59) Purging docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.pre-deinstall
(12/59) Purging docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.pre-deinstall
(13/59) Purging docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.pre-deinstall
(14/59) Purging gettext-dev (0.24.1-r1)
(15/59) Purging xz (5.8.3-r0)
(16/59) Purging gettext-asprintf (0.24.1-r1)
(17/59) Purging gettext (0.24.1-r1)
(18/59) Purging gettext-envsubst (0.24.1-r1)
(19/59) Purging libxml2-utils (2.13.9-r0)
(20/59) Purging libxslt (1.1.43-r3)
(21/59) Purging py3-packaging (25.0-r0)
(22/59) Purging py3-parsing (3.2.5-r0)
(23/59) Purging pcre2-dev (10.47-r0)
(24/59) Purging zlib-dev (1.3.2-r0)
(25/59) Purging libpcre2-16 (10.47-r0)
(26/59) Purging libpcre2-32 (10.47-r0)
(27/59) Purging libedit-dev (20251016.3.1-r0)
(28/59) Purging bsd-compat-headers (0.7.2-r6)
(29/59) Purging dbus-libs (1.16.2-r1)
(30/59) Purging gettext-libs (0.24.1-r1)
(31/59) Purging glib (2.86.3-r0)
(32/59) Purging lame-libs (3.100-r5)
(33/59) Purging libasyncns (0.8-r4)
(34/59) Purging libffi-dev (3.5.2-r0)
(35/59) Purging linux-headers (6.16.12-r0)
(36/59) Purging libflac (1.4.3-r2)
(37/59) Purging ncurses-dev (6.5_p20251123-r0)
(38/59) Purging libncurses++ (6.5_p20251123-r0)
(39/59) Purging libformw (6.5_p20251123-r0)
(40/59) Purging libintl (0.24.1-r1)
(41/59) Purging util-linux-dev (2.41.4-r0)
(42/59) Purging liblastlog2 (2.41.4-r0)
(43/59) Purging libltdl (2.5.4-r2)
(44/59) Purging libmenuw (6.5_p20251123-r0)
(45/59) Purging libvorbis (1.3.7-r2)
(46/59) Purging libogg (1.3.6-r0)
(47/59) Purging libx11 (1.8.12-r1)
(48/59) Purging libxcb (1.17.0-r1)
(49/59) Purging libxau (1.0.12-r0)
(50/59) Purging libxdmcp (1.1.5-r1)
(51/59) Purging libxml2 (2.13.9-r0)
(52/59) Purging mpg123-libs (1.33.3-r0)
(53/59) Purging opus (1.5.2-r1)
(54/59) Purging orc (0.4.41-r0)
(55/59) Purging soxr (0.1.3-r7)
(56/59) Purging speexdsp (1.2.1-r2)
(57/59) Purging sqlite-dev (3.51.2-r0)
(58/59) Purging sqlite (3.51.2-r0)
(59/59) Purging tdb-libs (1.4.14-r0)
Executing busybox-1.37.0-r30.trigger
OK: 683.0 MiB in 253 packages
+ cmake -B build-wdye -S tools/wdye
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Could NOT find Curses (missing: CURSES_LIBRARY CURSES_INCLUDE_PATH)
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (0.2s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build-wdye
+ cmake --build build-wdye
[ 50%] Building C object CMakeFiles/wdye.dir/wdye.c.o
[100%] Linking C executable wdye
[100%] Built target wdye
Deploy log