- Created
- 29d ago
- Changed
- 29d ago
- Project
- p/nncmpp
- Commit
- 1a0f61f6d8e5796cc19c279209871dc595bc9182
- Runner
- Alpine 3.23
- State
- Success
- Notified
- 1
- Duration
- 53s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.7-0-virt (buildozer@build-3-23-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-01-26 18:22:53
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000025] kvm-clock: using sched offset of 10936874356 cycles
[ 0.000028] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000031] tsc: Detected 3096.002 MHz processor
[ 0.000473] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000499] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000501] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000535] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007108] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007267] RAMDISK: [mem 0x7f652000-0x7fffffff]
[ 0.007269] ACPI: Early table checksum verification disabled
[ 0.007271] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007275] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007279] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007283] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007285] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007287] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007290] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007292] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007294] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007295] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007295] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007296] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007296] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007297] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.007705] No NUMA configuration found
[ 0.007706] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.007709] NODE_DATA(0) allocated [mem 0x13fff8d40-0x13fffcfff]
[ 0.007728] Zone ranges:
[ 0.007729] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007730] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007731] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007732] Movable zone start for each node
[ 0.007732] Early memory node ranges
[ 0.007732] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.007733] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.007734] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007735] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.007823] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007835] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013327] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.013965] ACPI: PM-Timer IO Port: 0x608
[ 0.013980] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.014012] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.014015] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014016] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.014017] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014017] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.014018] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.014030] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.014031] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014038] CPU topo: Max. logical packages: 1
[ 0.014039] CPU topo: Max. logical dies: 1
[ 0.014039] CPU topo: Max. dies per package: 1
[ 0.014042] CPU topo: Max. threads per core: 1
[ 0.014043] CPU topo: Num. cores per package: 4
[ 0.014043] CPU topo: Num. threads per package: 4
[ 0.014043] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.014058] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.014070] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.014071] Booting paravirtualized kernel on KVM
[ 0.014072] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.017686] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.017878] percpu: Embedded 55 pages/cpu s185240 r8192 d31848 u524288
[ 0.017901] kvm-guest: PV spinlocks disabled, no host support
[ 0.017902] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.017941] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.017944] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.018307] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.018470] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.018540] software IO TLB: area num 4.
[ 0.029706] Fallback order for Node 0: 0
[ 0.029710] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.029711] Policy zone: Normal
[ 0.029906] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.041372] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.041434] Kernel/User page tables isolation: enabled
[ 0.042144] Dynamic Preempt: none
[ 0.042292] rcu: Preemptible hierarchical RCU implementation.
[ 0.042292] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.042293] Trampoline variant of Tasks RCU enabled.
[ 0.042294] Tracing variant of Tasks RCU enabled.
[ 0.042294] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.042295] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.042301] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.042303] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.046237] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.046439] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.046518] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.053261] Console: colour VGA+ 80x25
[ 0.053313] printk: legacy console [ttyS0] enabled
[ 0.204213] ACPI: Core revision 20250807
[ 0.205370] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.207613] APIC: Switch to symmetric I/O mode setup
[ 0.209023] x2apic enabled
[ 0.209933] APIC: Switched APIC routing to: physical x2apic
[ 0.212353] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.213849] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca086da2ab, max_idle_ns: 440795258116 ns
[ 0.216340] Calibrating delay loop (skipped) preset value.. 6192.00 BogoMIPS (lpj=3096002)
[ 0.217423] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.218340] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.219343] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.220341] Speculative Store Bypass: Vulnerable
[ 0.221341] Spectre V2 : Mitigation: Retpolines
[ 0.222340] ITS: Mitigation: Aligned branch/return thunks
[ 0.223340] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.224340] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.225340] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.226342] active return thunk: its_return_thunk
[ 0.227341] x86/fpu: x87 FPU will use FXSAVE
[ 0.242379] Freeing SMP alternatives memory: 40K
[ 0.243344] pid_max: default: 32768 minimum: 301
[ 0.244626] LSM: initializing lsm=lockdown,capability,landlock
[ 0.246772] landlock: Up and running.
[ 0.247495] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.248343] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.352506] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.353538] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.354367] signal: max sigframe size: 1440
[ 0.355368] rcu: Hierarchical SRCU implementation.
[ 0.356340] rcu: Max phase no-delay instances is 400.
[ 0.357390] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.361968] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.362394] smp: Bringing up secondary CPUs ...
[ 0.363476] smpboot: x86: Booting SMP configuration:
[ 0.364343] .... node #0, CPUs: #1 #2 #3
[ 0.368496] smp: Brought up 1 node, 4 CPUs
[ 0.370342] smpboot: Total of 4 processors activated (24768.01 BogoMIPS)
[ 0.371578] Memory: 4000128K/4193760K available (14578K kernel code, 2022K rwdata, 9648K rodata, 2988K init, 1224K bss, 188748K reserved, 0K cma-reserved)
[ 0.373383] devtmpfs: initialized
[ 0.374111] x86/mm: Memory block size: 128MB
[ 0.375757] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.376346] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.377346] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.379719] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.380429] audit: initializing netlink subsys (disabled)
[ 0.381355] audit: type=2000 audit(1779736449.999:1): state=initialized audit_enabled=0 res=1
[ 0.381419] thermal_sys: Registered thermal governor 'step_wise'
[ 0.382357] cpuidle: using governor ladder
[ 0.385345] cpuidle: using governor menu
[ 0.386181] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.387620] PCI: Using configuration type 1 for base access
[ 0.389398] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.391384] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.392340] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.394538] ACPI: Added _OSI(Module Device)
[ 0.395341] ACPI: Added _OSI(Processor Device)
[ 0.396340] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.398867] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.400499] ACPI: Interpreter enabled
[ 0.401347] ACPI: PM: (supports S0 S3 S5)
[ 0.402340] ACPI: Using IOAPIC for interrupt routing
[ 0.403350] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.404340] PCI: Using E820 reservations for host bridge windows
[ 0.405424] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.408752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.410343] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.411341] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.414347] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.416608] acpiphp: Slot [3] registered
[ 0.417361] acpiphp: Slot [4] registered
[ 0.418376] acpiphp: Slot [5] registered
[ 0.419361] acpiphp: Slot [6] registered
[ 0.420360] acpiphp: Slot [7] registered
[ 0.421362] acpiphp: Slot [8] registered
[ 0.422360] acpiphp: Slot [9] registered
[ 0.423360] acpiphp: Slot [10] registered
[ 0.424360] acpiphp: Slot [11] registered
[ 0.425360] acpiphp: Slot [12] registered
[ 0.426360] acpiphp: Slot [13] registered
[ 0.427296] acpiphp: Slot [14] registered
[ 0.427360] acpiphp: Slot [15] registered
[ 0.428362] acpiphp: Slot [16] registered
[ 0.429360] acpiphp: Slot [17] registered
[ 0.430360] acpiphp: Slot [18] registered
[ 0.431360] acpiphp: Slot [19] registered
[ 0.432362] acpiphp: Slot [20] registered
[ 0.433360] acpiphp: Slot [21] registered
[ 0.434361] acpiphp: Slot [22] registered
[ 0.435362] acpiphp: Slot [23] registered
[ 0.436384] acpiphp: Slot [24] registered
[ 0.437360] acpiphp: Slot [25] registered
[ 0.438246] acpiphp: Slot [26] registered
[ 0.438360] acpiphp: Slot [27] registered
[ 0.439360] acpiphp: Slot [28] registered
[ 0.440360] acpiphp: Slot [29] registered
[ 0.441360] acpiphp: Slot [30] registered
[ 0.442362] acpiphp: Slot [31] registered
[ 0.443356] PCI host bridge to bus 0000:00
[ 0.444343] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.445341] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.447341] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.448340] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.450341] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.451341] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.453466] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.456451] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.459179] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.462089] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.463428] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.464340] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.466340] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.467342] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.469589] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.472416] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.473367] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.475707] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.480361] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.481397] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.483390] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.484464] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.486902] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.491356] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.492354] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.493424] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.495354] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.498274] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.501354] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.502378] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.504390] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.507692] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.511354] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.513355] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.514391] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.518159] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.519477] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.521491] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.522471] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.524399] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.525808] iommu: Default domain type: Translated
[ 0.527340] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.528516] SCSI subsystem initialized
[ 0.530430] pps_core: LinuxPPS API ver. 1 registered
[ 0.531340] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.533344] PTP clock support registered
[ 0.534652] PCI: Using ACPI for IRQ routing
[ 0.536399] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.537418] clocksource: Switched to clocksource kvm-clock
[ 0.539527] VFS: Disk quotas dquot_6.6.0
[ 0.540504] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.542208] pnp: PnP ACPI init
[ 0.543232] pnp: PnP ACPI: found 6 devices
[ 0.550721] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.553409] NET: Registered PF_INET protocol family
[ 0.554852] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.565257] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.567410] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.569282] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.571052] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.572704] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.574309] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.575905] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.577387] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.578983] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.580287] NET: Registered PF_XDP protocol family
[ 0.581327] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.582620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.583928] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.585406] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.586838] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.588377] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.589607] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.590981] PCI: CLS 0 bytes, default 64
[ 0.591841] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.591946] Unpacking initramfs...
[ 0.593247] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.593284] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca086da2ab, max_idle_ns: 440795258116 ns
[ 0.598338] Initialise system trusted keyrings
[ 0.599427] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.601430] Key type asymmetric registered
[ 0.602588] Asymmetric key parser 'x509' registered
[ 0.604054] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.606361] io scheduler mq-deadline registered
[ 0.607730] io scheduler kyber registered
[ 0.608977] io scheduler bfq registered
[ 0.612984] ERST DBG: ERST support is disabled.
[ 0.614601] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.617626] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.620557] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.626417] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.628102] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.630801] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.632808] scsi host0: ata_piix
[ 0.633720] scsi host1: ata_piix
[ 0.634510] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.636237] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.637956] hv_vmbus: registering driver hv_netvsc
[ 0.639194] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.642031] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.643215] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.644308] hv_vmbus: registering driver hyperv_keyboard
[ 0.645461] rtc_cmos 00:05: RTC can wake from S4
[ 0.647186] rtc_cmos 00:05: registered as rtc0
[ 0.647875] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.648728] rtc_cmos 00:05: setting system clock to 2026-05-25T19:14:09 UTC (1779736449)
[ 0.652427] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.654069] intel_pstate: CPU model not supported
[ 0.655256] gre: GRE over IPv4 demultiplexer driver
[ 0.656422] NET: Registered PF_INET6 protocol family
[ 0.657887] Segment Routing with IPv6
[ 0.658692] In-situ OAM (IOAM) with IPv6
[ 0.659651] Key type dns_resolver registered
[ 0.660648] IPI shorthand broadcast: enabled
[ 0.663876] sched_clock: Marking stable (498007694, 164893487)->(688834795, -25933614)
[ 0.665937] registered taskstats version 1
[ 0.666463] Freeing initrd memory: 9912K
[ 0.667153] Loading compiled-in X.509 certificates
[ 0.672381] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.676471] Demotion targets for Node 0: null
[ 0.677763] Key type .fscrypt registered
[ 0.678719] Key type fscrypt-provisioning registered
[ 0.796952] ata2: found unknown device (class 0)
[ 0.803027] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.811743] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.844299] Freeing unused kernel image (initmem) memory: 2988K
[ 0.848338] Write protecting the kernel read-only data: 26624k
[ 0.855952] Freeing unused kernel image (text/rodata gap) memory: 1804K
[ 0.860675] Freeing unused kernel image (rodata/data gap) memory: 592K
[ 0.864689] rodata_test: all tests were successful
[ 0.867727] Run /init as init process
[ 0.885933] Alpine Init 3.13.0-r0
Alpine Init 3.13[ 0.887601] Loading boot drivers...
.0-r0
* Loading boot drivers: [ 0.919006] ACPI: bus type USB registered
[ 0.920049] usbcore: registered new interface driver usbfs
[ 0.921328] usbcore: registered new interface driver hub
[ 0.922449] usbcore: registered new device driver usb
[ 0.926815] usbcore: registered new interface driver usb-storage
[ 0.972454] loop: module loaded
[ 0.999607] ACPI: bus type drm_connector registered
[ 1.017009] Loading boot drivers: ok.
ok.
[ 1.019198] Mounting root...
* Mounting root: [ 1.035995] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.037283] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.042502] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.043261] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.044436] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.058613] Console: switching to colour frame buffer device 160x50
[ 1.060849] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.097764] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.098824] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.132930] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.135715] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.137715] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.140466] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.176317] block sr0: the capability attribute has been deprecated.
[ 1.913445] EXT4-fs (vda): mounted filesystem 325df078-35f9-4b5e-a95e-82778457688f ro with ordered data mode. Quota mode: none.
[ 1.921882] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.63 is starting up Linux 6.18.7-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
[ 2.397935] random: crng init done
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting trace filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Mounting bpf filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5520/51200 files, 171729/204800 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 25.3 running 'init-local' at Mon, 25 May 2026 19:14:11 +0000. Up 3.46 seconds.
[ ok ]
* Setting hostname to localhost from /etc/hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.3.0 starting
DUID 00:01:00:01:31:a7:5c:04:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::a322:4099:4f41:e0b1/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 25.3 running 'init' at Mon, 25 May 2026 19:14:24 +0000. Up 16.45 seconds.
ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::a322:4099:4f41:e0b1/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:oDAiCiYZ9z/L3gFByVnnLvpX5CjxK3bUsNyCovDr5V8 root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
|. . ..+. . |
| + . .+ o |
|*.o . o . |
|*. o o o... . |
|. . + S=.O |
| . ..=o.B = |
| o .=..oE+ |
| o+ ooo+ |
| .o.oo++ |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:u8O4dID6dUWSgmCfqHN8NEuRGfsOXABDQap1IzsjLX0 root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| oOo++ |
| o =o* . |
|. + @ o o . |
|.* B B . o |
|* O E o S . |
| = * o . o |
| . +o+ |
| . o.oo. |
| . .... |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:TbN37aZgaE0cqpSlSsFxX4vbzHvnBq63ltDOMM4EsS4 root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| . . . |
| . o ..o . |
| o *oo |
| . *oX . . |
| . S.=.B.. .|
| . oE..==oo. |
| . ..o+=B.o+|
| . .ooB=.|
| .+oo.|
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 25.3 running 'modules:config' at Mon, 25 May 2026 19:14:25 +0000. Up 17.40 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 25.3 running 'modules:final' at Mon, 25 May 2026 19:14:26 +0000. Up 17.85 seconds.
(1/1) Installing ca-certificates (20260413-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20260413-r0.trigger
OK: 136.2 MiB in 208 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
2026-05-25 19:14:27,796 - cc_keys_to_console.py[WARNING]: Unable to activate module keys_to_console, helper tool not found at /usr/lib/cloud-init/write-ssh-key-fingerprints
Cloud-init v. 25.3 finished at Mon, 25 May 2026 19:14:27 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 19.42 seconds
[ ok ]
Welcome to Alpine Linux 3.23
Kernel 6.18.7-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.3-r1 -> 3.0.6-r0)
(2/2) Upgrading apk-tools (3.0.3-r1 -> 3.0.6-r0)
Executing busybox-1.37.0-r30.trigger
Continuing with the main upgrade transaction:
( 1/33) Upgrading alpine-baselayout-data (3.7.1-r8 -> 3.7.2-r0)
Installing file to etc/fstab.apk-new
Installing file to etc/group.apk-new
Installing file to etc/hostname.apk-new
Installing file to etc/inittab.apk-new
Installing file to etc/passwd.apk-new
Installing file to etc/profile.apk-new
Installing file to etc/shadow.apk-new
( 2/33) Upgrading musl (1.2.5-r21 -> 1.2.5-r23)
( 3/33) Upgrading alpine-baselayout (3.7.1-r8 -> 3.7.2-r0)
Executing alpine-baselayout-3.7.2-r0.pre-upgrade
Installing file to etc/motd.apk-new
Executing alpine-baselayout-3.7.2-r0.post-upgrade
( 4/33) Upgrading libcap2 (2.77-r0 -> 2.78-r0)
( 5/33) Upgrading alpine-release (3.23.3-r0 -> 3.23.4-r0)
( 6/33) Upgrading libcrypto3 (3.5.5-r0 -> 3.5.6-r0)
( 7/33) Upgrading libssl3 (3.5.5-r0 -> 3.5.6-r0)
( 8/33) Upgrading zlib (1.3.1-r2 -> 1.3.2-r0)
( 9/33) Upgrading ca-certificates-bundle (20251003-r0 -> 20260413-r0)
Installing file to etc/ssl/certs/ca-certificates.crt.apk-new
(10/33) Upgrading musl-utils (1.2.5-r21 -> 1.2.5-r23)
(11/33) Upgrading alpine-base (3.23.3-r0 -> 3.23.4-r0)
(12/33) Upgrading gnutls (3.8.11-r0 -> 3.8.13-r0)
(13/33) Upgrading chrony (4.8-r1 -> 4.8-r2)
Executing chrony-4.8-r2.pre-upgrade
(14/33) Upgrading chrony-openrc (4.8-r1 -> 4.8-r2)
(15/33) Upgrading libblkid (2.41.2-r0 -> 2.41.4-r0)
(16/33) Upgrading blkid (2.41.2-r0 -> 2.41.4-r0)
(17/33) Upgrading libsmartcols (2.41.2-r0 -> 2.41.4-r0)
(18/33) Upgrading partx (2.41.2-r0 -> 2.41.4-r0)
(19/33) Upgrading libuuid (2.41.2-r0 -> 2.41.4-r0)
(20/33) Upgrading libfdisk (2.41.2-r0 -> 2.41.4-r0)
(21/33) Upgrading sfdisk (2.41.2-r0 -> 2.41.4-r0)
(22/33) Upgrading libexpat (2.7.3-r0 -> 2.7.5-r0)
(23/33) Upgrading xz-libs (5.8.2-r0 -> 5.8.3-r0)
(24/33) Upgrading python3 (3.12.12-r0 -> 3.12.13-r0)
(25/33) Upgrading python3-pycache-pyc0 (3.12.12-r0 -> 3.12.13-r0)
(26/33) Upgrading pyc (3.12.12-r0 -> 3.12.13-r0)
(27/33) Upgrading python3-pyc (3.12.12-r0 -> 3.12.13-r0)
(28/33) Upgrading py3-requests (2.32.5-r0 -> 2.33.1-r0)
(29/33) Upgrading py3-requests-pyc (2.32.5-r0 -> 2.33.1-r0)
(30/33) Upgrading tzdata (2025c-r0 -> 2026b-r0)
(31/33) Upgrading linux-virt (6.18.7-r0 -> 6.18.33-r0)
(32/33) Upgrading libmount (2.41.2-r0 -> 2.41.4-r0)
(33/33) Upgrading mount (2.41.2-r0 -> 2.41.4-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20260413-r0.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.13.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.33-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 136.7 MiB in 208 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/9) Installing c-ares (1.34.6-r0)
(2/9) Installing nghttp2-libs (1.69.0-r0)
(3/9) Installing libpsl (0.21.5-r3)
(4/9) Installing libcurl (8.19.0-r0)
(5/9) Installing pcre2 (10.47-r0)
(6/9) Installing git (2.52.0-r0)
(7/9) Installing git-init-template (2.52.0-r0)
(8/9) Installing gnu-libiconv-libs (1.18-r0)
(9/9) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r30.trigger
OK: 146.1 MiB in 217 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/nncmpp.git nncmpp
Cloning into 'nncmpp'...
remote: Enumerating objects: 1150, done.
remote: Counting objects: 100% (444/444), done.
remote: Compressing objects: 100% (155/155), done.
remote: Total 1150 (delta 287), reused 444 (delta 287), pack-reused 706 (from 1)
Receiving objects: 100% (1150/1150), 826.51 KiB | 23.61 MiB/s, done.
Resolving deltas: 100% (739/739), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Submodule 'termo' (https://git.janouch.name/p/termo.git) registered for path 'termo'
Cloning into '/home/ci/nncmpp/liberty'...
remote: Enumerating objects: 907, done.
remote: Counting objects: 100% (376/376), done.
remote: Compressing objects: 100% (373/373), done.
remote: Total 907 (delta 239), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (907/907), 443.75 KiB | 17.07 MiB/s, done.
Resolving deltas: 100% (560/560), done.
Cloning into '/home/ci/nncmpp/termo'...
remote: Enumerating objects: 1977, done.
remote: Counting objects: 100% (38/38), done.
remote: Compressing objects: 100% (37/37), done.
remote: Total 1977 (delta 14), reused 0 (delta 0), pack-reused 1939 (from 1)
Receiving objects: 100% (1977/1977), 1.38 MiB | 21.74 MiB/s, done.
Resolving deltas: 100% (1259/1259), done.
Submodule path 'liberty': checked out 'd7c70bd43ab607f9e73653d417ff0fcef2ad2b8a'
Submodule path 'termo': checked out 'f9a102456fa6a0b43a916ceaf031f21ea5665e6e'
+ cd nncmpp
+ git -c 'advice.detachedHead=false' checkout 1a0f61f6d8e5796cc19c279209871dc595bc9182
HEAD is now at 1a0f61f Add an AppKit user interface
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=2.1.1-17-g1a0f61f
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/2.1.1-17-g1a0f61f/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake asciidoctor rsvg-convert libunistring-dev ncurses-dev curl-dev fftw-dev pulseaudio-dev libx11-dev libxft-dev libpng-dev
( 1/134) Installing ruby-libs (3.4.9-r0)
( 2/134) Installing libucontext (1.3.3-r0)
( 3/134) Installing ruby (3.4.9-r0)
( 4/134) Installing asciidoctor (2.0.26-r0)
( 5/134) Installing jansson (2.14.1-r0)
( 6/134) Installing binutils (2.45.1-r0)
( 7/134) Installing libmagic (5.46-r2)
( 8/134) Installing file (5.46-r2)
( 9/134) Installing libgomp (15.2.0-r2)
( 10/134) Installing libatomic (15.2.0-r2)
( 11/134) Installing isl26 (0.26-r1)
( 12/134) Installing mpfr4 (4.2.2-r0)
( 13/134) Installing mpc1 (1.3.1-r1)
( 14/134) Installing gcc (15.2.0-r2)
( 15/134) Installing libstdc++-dev (15.2.0-r2)
( 16/134) Installing musl-dev (1.2.5-r23)
( 17/134) Installing g++ (15.2.0-r2)
( 18/134) Installing make (4.4.1-r3)
( 19/134) Installing fortify-headers (1.1-r5)
( 20/134) Installing patch (2.8-r0)
( 21/134) Installing build-base (0.5-r3)
( 22/134) Installing acl-libs (2.3.2-r1)
( 23/134) Installing lz4-libs (1.10.0-r0)
( 24/134) Installing libarchive (3.8.5-r0)
( 25/134) Installing rhash-libs (1.4.6-r0)
( 26/134) Installing libuv (1.51.0-r0)
( 27/134) Installing cmake (4.1.3-r0)
( 28/134) Installing brotli (1.2.0-r0)
( 29/134) Installing pkgconf (2.5.1-r0)
( 30/134) Installing brotli-dev (1.2.0-r0)
( 31/134) Installing c-ares-dev (1.34.6-r0)
( 32/134) Installing libidn2-dev (2.3.8-r0)
( 33/134) Installing libpsl-utils (0.21.5-r3)
( 34/134) Installing libpsl-dev (0.21.5-r3)
( 35/134) Installing nghttp2-dev (1.69.0-r0)
( 36/134) Installing nghttp3 (1.13.1-r0)
( 37/134) Installing nghttp3-dev (1.13.1-r0)
( 38/134) Installing openssl-dev (3.5.6-r0)
( 39/134) Installing zlib-dev (1.3.2-r0)
( 40/134) Installing zstd (1.5.7-r2)
( 41/134) Installing zstd-dev (1.5.7-r2)
( 42/134) Installing curl-dev (8.19.0-r0)
( 43/134) Installing fftw-double-libs (3.3.10-r7)
( 44/134) Installing fftw-long-double-libs (3.3.10-r7)
( 45/134) Installing fftw-single-libs (3.3.10-r7)
( 46/134) Installing fftw-dev (3.3.10-r7)
( 47/134) Installing libpng (1.6.58-r1)
( 48/134) Installing libpng-dev (1.6.58-r1)
( 49/134) Installing libunistring-dev (1.4.1-r0)
( 50/134) Installing libxau (1.0.12-r0)
( 51/134) Installing xorgproto (2024.1-r0)
( 52/134) Installing libxau-dev (1.0.12-r0)
( 53/134) Installing xcb-proto (1.17.0-r0)
( 54/134) Installing xcb-proto-pyc (1.17.0-r0)
( 55/134) Installing libxdmcp (1.1.5-r1)
( 56/134) Installing libxcb (1.17.0-r1)
( 57/134) Installing libxdmcp-dev (1.1.5-r1)
( 58/134) Installing libxcb-dev (1.17.0-r1)
( 59/134) Installing xtrans (1.6.0-r0)
( 60/134) Installing libx11 (1.8.12-r1)
( 61/134) Installing libx11-dev (1.8.12-r1)
( 62/134) Installing libxrender (0.9.12-r0)
( 63/134) Installing freetype (2.14.1-r0)
( 64/134) Installing fontconfig (2.17.1-r0)
( 65/134) Installing libxft (2.3.9-r0)
( 66/134) Installing expat (2.7.5-r0)
( 67/134) Installing expat-dev (2.7.5-r0)
( 68/134) Installing bzip2-dev (1.0.8-r6)
( 69/134) Installing freetype-dev (2.14.1-r0)
( 70/134) Installing fontconfig-dev (2.17.1-r0)
( 71/134) Installing libxrender-dev (0.9.12-r0)
( 72/134) Installing libxft-dev (2.3.9-r0)
( 73/134) Installing libformw (6.5_p20251123-r0)
( 74/134) Installing libmenuw (6.5_p20251123-r0)
( 75/134) Installing libncurses++ (6.5_p20251123-r0)
( 76/134) Installing ncurses-dev (6.5_p20251123-r0)
( 77/134) Installing libintl (0.24.1-r1)
( 78/134) Installing glib (2.86.3-r0)
( 79/134) Installing libasyncns (0.8-r4)
( 80/134) Installing dbus-libs (1.16.2-r1)
( 81/134) Installing libltdl (2.5.4-r2)
( 82/134) Installing orc (0.4.41-r0)
( 83/134) Installing libogg (1.3.6-r0)
( 84/134) Installing libflac (1.4.3-r2)
( 85/134) Installing alsa-lib (1.2.14-r2)
( 86/134) Installing lame-libs (3.100-r5)
( 87/134) Installing mpg123-libs (1.33.3-r0)
( 88/134) Installing opus (1.5.2-r1)
( 89/134) Installing libvorbis (1.3.7-r2)
( 90/134) Installing libsndfile (1.2.2-r2)
( 91/134) Installing soxr (0.1.3-r7)
( 92/134) Installing speexdsp (1.2.1-r2)
( 93/134) Installing tdb-libs (1.4.14-r0)
( 94/134) Installing libpulse (17.0-r5)
( 95/134) Installing libpulse-mainloop-glib (17.0-r5)
( 96/134) Installing libxml2 (2.13.9-r0)
( 97/134) Installing libxml2-utils (2.13.9-r0)
( 98/134) Installing docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.post-install
( 99/134) Installing libxslt (1.1.43-r3)
(100/134) Installing docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.post-install
(101/134) Installing docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.post-install
(102/134) Installing docbook-xsl (1.79.2-r13)
(103/134) Installing xz (5.8.3-r0)
(104/134) Installing gettext-asprintf (0.24.1-r1)
(105/134) Installing gettext-libs (0.24.1-r1)
(106/134) Installing gettext-envsubst (0.24.1-r1)
(107/134) Installing gettext (0.24.1-r1)
(108/134) Installing gettext-dev (0.24.1-r1)
(109/134) Installing py3-parsing (3.2.5-r0)
(110/134) Installing py3-parsing-pyc (3.2.5-r0)
(111/134) Installing py3-packaging (25.0-r0)
(112/134) Installing py3-packaging-pyc (25.0-r0)
(113/134) Installing linux-headers (6.16.12-r0)
(114/134) Installing libffi-dev (3.5.2-r0)
(115/134) Installing bsd-compat-headers (0.7.2-r6)
(116/134) Installing libedit-dev (20251016.3.1-r0)
(117/134) Installing libpcre2-16 (10.47-r0)
(118/134) Installing libpcre2-32 (10.47-r0)
(119/134) Installing pcre2-dev (10.47-r0)
(120/134) Installing liblastlog2 (2.41.4-r0)
(121/134) Installing sqlite (3.51.2-r0)
(122/134) Installing sqlite-dev (3.51.2-r0)
(123/134) Installing util-linux-dev (2.41.4-r0)
(124/134) Installing glib-dev (2.86.3-r0)
(125/134) Installing pulseaudio-dev (17.0-r5)
(126/134) Installing libxext (1.3.6-r2)
(127/134) Installing pixman (0.46.4-r0)
(128/134) Installing cairo (1.18.4-r0)
(129/134) Installing libdav1d (1.5.2-r0)
(130/134) Installing graphite2 (1.3.14-r6)
(131/134) Installing harfbuzz (12.2.0-r0)
(132/134) Installing fribidi (1.0.16-r2)
(133/134) Installing pango (1.56.4-r0)
(134/134) Installing rsvg-convert (2.61.2-r0)
Executing busybox-1.37.0-r30.trigger
Executing glib-2.86.3-r0.trigger
* No schema files found: doing nothing.
OK: 588.9 MiB in 351 packages
+ cmake -B build '-DBUILD_TESTING=ON'
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Found Ncursesw: ncursesw
-- Found Unistring: /usr/include
-- Checking for module 'libcurl'
-- Found libcurl, version 8.19.0
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found Curses: /usr/lib/libcurses.so
-- Checking for modules 'glib-2.0;gio-2.0'
-- Found glib-2.0, version 2.86.3
-- Found gio-2.0, version 2.86.3
-- Checking for module 'unibilium>=0.1.0'
-- Package 'unibilium' not found
-- Checking for modules 'fftw3;fftw3f'
-- Found fftw3, version 3.3.10
-- Found fftw3f, version 3.3.10
-- Checking for module 'libpulse'
-- Found libpulse, version 17.0
-- Checking for modules 'x11;xrender;xft;fontconfig;libpng'
-- Found x11, version 1.8.12
-- Found xrender, version 0.9.12
-- Found xft, version 2.3.9
-- Found fontconfig, version 2.17.1
-- Found libpng, version 1.6.58
-- Looking for resizeterm
-- Looking for resizeterm - found
-- Configuring done (0.8s)
-- Generating done (0.1s)
-- Build files have been written to: /home/ci/nncmpp/build
+ cmake --build build -- package
[ 9%] Building C object termo/CMakeFiles/termo-static.dir/termo.c.o
[ 18%] Building C object termo/CMakeFiles/termo-static.dir/driver-csi.c.o
[ 27%] Building C object termo/CMakeFiles/termo-static.dir/driver-ti.c.o
[ 36%] Linking C static library libtermo-0.a
[ 36%] Built target termo-static
[ 45%] Generating nncmpp-actions.h
[ 54%] Building C object CMakeFiles/nncmpp.dir/nncmpp.c.o
In file included from /home/ci/nncmpp/nncmpp.c:72:
/home/ci/nncmpp/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 63%] Linking C executable nncmpp
[ 63%] Built target nncmpp
[ 72%] Generating nncmpp 16x16 application icon
[ 81%] Generating nncmpp 32x32 application icon
[ 90%] Generating nncmpp 48x48 application icon
[ 90%] Built target icons
[100%] Generating man page for nncmpp
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: nncmpp
CPack: - Install project: nncmpp []
CPack: Create package
CPack: - package: /home/ci/nncmpp/build/nncmpp-2.1.1-17-g1a0f61f-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: nncmpp
CPack: - Install project: nncmpp []
CPack: Create package
CPack: - package: /home/ci/nncmpp/build/nncmpp-2.1.1-17-g1a0f61f-Linux-x86_64.zip generated.
+ cmake --build build -- test
Running tests...
gmake[1]: Entering directory '/home/ci/nncmpp/build/termo'
[ 1%] Building C object termo/CMakeFiles/termo.dir/termo.c.o
[ 3%] Building C object termo/CMakeFiles/termo.dir/driver-csi.c.o
[ 5%] Building C object termo/CMakeFiles/termo.dir/driver-ti.c.o
[ 7%] Linking C shared library libtermo-0.so
[ 7%] Built target termo
[ 14%] Built target termo-static
[ 16%] Building C object termo/CMakeFiles/test-01base.dir/tests/01base.c.o
[ 17%] Building C object termo/CMakeFiles/test-01base.dir/tests/taplib.c.o
[ 19%] Linking C executable test-01base
[ 19%] Built target test-01base
[ 21%] Building C object termo/CMakeFiles/test-02getkey.dir/tests/02getkey.c.o
[ 23%] Building C object termo/CMakeFiles/test-02getkey.dir/tests/taplib.c.o
[ 25%] Linking C executable test-02getkey
[ 25%] Built target test-02getkey
[ 26%] Building C object termo/CMakeFiles/test-03utf8.dir/tests/03utf8.c.o
[ 28%] Building C object termo/CMakeFiles/test-03utf8.dir/tests/taplib.c.o
[ 30%] Linking C executable test-03utf8
[ 30%] Built target test-03utf8
[ 32%] Building C object termo/CMakeFiles/test-04flags.dir/tests/04flags.c.o
[ 33%] Building C object termo/CMakeFiles/test-04flags.dir/tests/taplib.c.o
[ 35%] Linking C executable test-04flags
[ 35%] Built target test-04flags
[ 37%] Building C object termo/CMakeFiles/test-05read.dir/tests/05read.c.o
[ 39%] Building C object termo/CMakeFiles/test-05read.dir/tests/taplib.c.o
[ 41%] Linking C executable test-05read
[ 41%] Built target test-05read
[ 42%] Building C object termo/CMakeFiles/test-06buffer.dir/tests/06buffer.c.o
[ 44%] Building C object termo/CMakeFiles/test-06buffer.dir/tests/taplib.c.o
[ 46%] Linking C executable test-06buffer
[ 46%] Built target test-06buffer
[ 48%] Building C object termo/CMakeFiles/test-10keyname.dir/tests/10keyname.c.o
[ 50%] Building C object termo/CMakeFiles/test-10keyname.dir/tests/taplib.c.o
[ 51%] Linking C executable test-10keyname
[ 51%] Built target test-10keyname
[ 53%] Building C object termo/CMakeFiles/test-11strfkey.dir/tests/11strfkey.c.o
[ 55%] Building C object termo/CMakeFiles/test-11strfkey.dir/tests/taplib.c.o
[ 57%] Linking C executable test-11strfkey
[ 57%] Built target test-11strfkey
[ 58%] Building C object termo/CMakeFiles/test-12strpkey.dir/tests/12strpkey.c.o
[ 60%] Building C object termo/CMakeFiles/test-12strpkey.dir/tests/taplib.c.o
[ 62%] Linking C executable test-12strpkey
[ 62%] Built target test-12strpkey
[ 64%] Building C object termo/CMakeFiles/test-13cmpkey.dir/tests/13cmpkey.c.o
[ 66%] Building C object termo/CMakeFiles/test-13cmpkey.dir/tests/taplib.c.o
[ 67%] Linking C executable test-13cmpkey
[ 67%] Built target test-13cmpkey
[ 69%] Building C object termo/CMakeFiles/test-20canon.dir/tests/20canon.c.o
[ 71%] Building C object termo/CMakeFiles/test-20canon.dir/tests/taplib.c.o
[ 73%] Linking C executable test-20canon
[ 73%] Built target test-20canon
[ 75%] Building C object termo/CMakeFiles/test-30mouse.dir/tests/30mouse.c.o
[ 76%] Building C object termo/CMakeFiles/test-30mouse.dir/tests/taplib.c.o
[ 78%] Linking C executable test-30mouse
[ 78%] Built target test-30mouse
[ 80%] Building C object termo/CMakeFiles/test-31position.dir/tests/31position.c.o
[ 82%] Building C object termo/CMakeFiles/test-31position.dir/tests/taplib.c.o
[ 83%] Linking C executable test-31position
[ 83%] Built target test-31position
[ 85%] Building C object termo/CMakeFiles/test-32modereport.dir/tests/32modereport.c.o
[ 87%] Building C object termo/CMakeFiles/test-32modereport.dir/tests/taplib.c.o
[ 89%] Linking C executable test-32modereport
[ 89%] Built target test-32modereport
[ 91%] Building C object termo/CMakeFiles/test-33focus.dir/tests/33focus.c.o
[ 92%] Building C object termo/CMakeFiles/test-33focus.dir/tests/taplib.c.o
[ 94%] Linking C executable test-33focus
[ 94%] Built target test-33focus
[ 96%] Building C object termo/CMakeFiles/test-39csi.dir/tests/39csi.c.o
[ 98%] Building C object termo/CMakeFiles/test-39csi.dir/tests/taplib.c.o
[100%] Linking C executable test-39csi
[100%] Built target test-39csi
gmake[1]: Leaving directory '/home/ci/nncmpp/build/termo'
Test project /home/ci/nncmpp/build
Start 1: test-xmlwf-nncmpp.svg
1/18 Test #1: test-xmlwf-nncmpp.svg ............ Passed 0.00 sec
Start 2: test-xmllint-nncmpp.svg
2/18 Test #2: test-xmllint-nncmpp.svg .......... Passed 0.00 sec
Start 3: termo.01base
3/18 Test #3: termo.01base ..................... Passed 0.00 sec
Start 4: termo.02getkey
4/18 Test #4: termo.02getkey ................... Passed 0.00 sec
Start 5: termo.03utf8
5/18 Test #5: termo.03utf8 ..................... Passed 0.00 sec
Start 6: termo.04flags
6/18 Test #6: termo.04flags .................... Passed 0.00 sec
Start 7: termo.05read
7/18 Test #7: termo.05read ..................... Passed 0.00 sec
Start 8: termo.06buffer
8/18 Test #8: termo.06buffer ................... Passed 0.00 sec
Start 9: termo.10keyname
9/18 Test #9: termo.10keyname .................. Passed 0.00 sec
Start 10: termo.11strfkey
10/18 Test #10: termo.11strfkey .................. Passed 0.00 sec
Start 11: termo.12strpkey
11/18 Test #11: termo.12strpkey .................. Passed 0.00 sec
Start 12: termo.13cmpkey
12/18 Test #12: termo.13cmpkey ................... Passed 0.00 sec
Start 13: termo.20canon
13/18 Test #13: termo.20canon .................... Passed 0.00 sec
Start 14: termo.30mouse
14/18 Test #14: termo.30mouse .................... Passed 0.00 sec
Start 15: termo.31position
15/18 Test #15: termo.31position ................. Passed 0.00 sec
Start 16: termo.32modereport
16/18 Test #16: termo.32modereport ............... Passed 0.00 sec
Start 17: termo.33focus
17/18 Test #17: termo.33focus .................... Passed 0.00 sec
Start 18: termo.39csi
18/18 Test #18: termo.39csi ...................... Passed 0.00 sec
100% tests passed, 0 tests failed out of 18
Total Test time (real) = 0.02 sec
Deploy log