- Created
- 10d ago
- Changed
- 10d ago
- Project
- p/acid
- Commit
- 72f8c18e17ad58a2adccaba05089ccf5b75682c2
- Runner
- Alpine 3.24
- State
- Success
- Notified
- 1
- Duration
- 1m50s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.7-0-virt (buildozer@build-3-23-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-01-26 18:22:53
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 10845552194 cycles
[ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000007] tsc: Detected 3096.006 MHz processor
[ 0.000453] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000481] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000483] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000520] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007501] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007699] RAMDISK: [mem 0x7f652000-0x7fffffff]
[ 0.007702] ACPI: Early table checksum verification disabled
[ 0.007704] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007708] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007713] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007717] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007719] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007721] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007724] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007726] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007728] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007729] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007730] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007730] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007731] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007731] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.008177] No NUMA configuration found
[ 0.008178] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.008181] NODE_DATA(0) allocated [mem 0x13fff8d40-0x13fffcfff]
[ 0.008217] Zone ranges:
[ 0.008218] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008219] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008220] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008221] Movable zone start for each node
[ 0.008222] Early memory node ranges
[ 0.008222] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.008223] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.008224] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008224] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.008317] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.008329] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.014029] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.014698] ACPI: PM-Timer IO Port: 0x608
[ 0.014712] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.014746] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.014749] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014751] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.014751] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014752] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.014753] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.014756] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.014757] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014764] CPU topo: Max. logical packages: 1
[ 0.014765] CPU topo: Max. logical dies: 1
[ 0.014765] CPU topo: Max. dies per package: 1
[ 0.014769] CPU topo: Max. threads per core: 1
[ 0.014769] CPU topo: Num. cores per package: 4
[ 0.014769] CPU topo: Num. threads per package: 4
[ 0.014770] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.014784] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.014796] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.014797] Booting paravirtualized kernel on KVM
[ 0.014798] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.018471] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.018666] percpu: Embedded 55 pages/cpu s185240 r8192 d31848 u524288
[ 0.018691] kvm-guest: PV spinlocks disabled, no host support
[ 0.018692] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.018731] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.018734] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.019060] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.019227] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.019307] software IO TLB: area num 4.
[ 0.031126] Fallback order for Node 0: 0
[ 0.031131] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.031132] Policy zone: Normal
[ 0.031368] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.043334] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.043402] Kernel/User page tables isolation: enabled
[ 0.044125] Dynamic Preempt: none
[ 0.044278] rcu: Preemptible hierarchical RCU implementation.
[ 0.044279] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.044280] Trampoline variant of Tasks RCU enabled.
[ 0.044281] Tracing variant of Tasks RCU enabled.
[ 0.044281] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.044282] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.044288] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.044290] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.048486] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.048707] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.048807] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.055911] Console: colour VGA+ 80x25
[ 0.055966] printk: legacy console [ttyS0] enabled
[ 0.225111] ACPI: Core revision 20250807
[ 0.226193] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.228368] APIC: Switch to symmetric I/O mode setup
[ 0.229777] x2apic enabled
[ 0.230658] APIC: Switched APIC routing to: physical x2apic
[ 0.233017] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.234471] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.236830] Calibrating delay loop (skipped) preset value.. 6192.01 BogoMIPS (lpj=3096006)
[ 0.237913] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.238830] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.239832] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.240832] Speculative Store Bypass: Vulnerable
[ 0.241832] Spectre V2 : Mitigation: Retpolines
[ 0.242831] ITS: Mitigation: Aligned branch/return thunks
[ 0.243828] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.243828] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.243834] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.244833] active return thunk: its_return_thunk
[ 0.245834] x86/fpu: x87 FPU will use FXSAVE
[ 0.263115] Freeing SMP alternatives memory: 40K
[ 0.263836] pid_max: default: 32768 minimum: 301
[ 0.265117] LSM: initializing lsm=lockdown,capability,landlock
[ 0.266258] landlock: Up and running.
[ 0.266950] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.267834] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.372828] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.373088] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.374858] signal: max sigframe size: 1440
[ 0.375859] rcu: Hierarchical SRCU implementation.
[ 0.376829] rcu: Max phase no-delay instances is 400.
[ 0.377884] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.382523] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.382890] smp: Bringing up secondary CPUs ...
[ 0.383926] smpboot: x86: Booting SMP configuration:
[ 0.384832] .... node #0, CPUs: #1 #2 #3
[ 0.388861] smp: Brought up 1 node, 4 CPUs
[ 0.390830] smpboot: Total of 4 processors activated (24768.04 BogoMIPS)
[ 0.392099] Memory: 4000128K/4193760K available (14578K kernel code, 2022K rwdata, 9648K rodata, 2988K init, 1224K bss, 188748K reserved, 0K cma-reserved)
[ 0.393103] devtmpfs: initialized
[ 0.393871] x86/mm: Memory block size: 128MB
[ 0.396136] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.396850] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.397836] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.399603] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.399941] audit: initializing netlink subsys (disabled)
[ 0.400851] audit: type=2000 audit(1784097982.951:1): state=initialized audit_enabled=0 res=1
[ 0.400889] thermal_sys: Registered thermal governor 'step_wise'
[ 0.401842] cpuidle: using governor ladder
[ 0.403834] cpuidle: using governor menu
[ 0.405081] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.406102] PCI: Using configuration type 1 for base access
[ 0.407879] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.408872] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.409830] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.411052] ACPI: Added _OSI(Module Device)
[ 0.411831] ACPI: Added _OSI(Processor Device)
[ 0.412830] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.414905] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.416953] ACPI: Interpreter enabled
[ 0.417838] ACPI: PM: (supports S0 S3 S5)
[ 0.418830] ACPI: Using IOAPIC for interrupt routing
[ 0.419844] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.420830] PCI: Using E820 reservations for host bridge windows
[ 0.421913] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.425229] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.425852] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.426831] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.427838] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.429197] acpiphp: Slot [3] registered
[ 0.429858] acpiphp: Slot [4] registered
[ 0.430852] acpiphp: Slot [5] registered
[ 0.431852] acpiphp: Slot [6] registered
[ 0.432851] acpiphp: Slot [7] registered
[ 0.433851] acpiphp: Slot [8] registered
[ 0.434851] acpiphp: Slot [9] registered
[ 0.435870] acpiphp: Slot [10] registered
[ 0.436854] acpiphp: Slot [11] registered
[ 0.437851] acpiphp: Slot [12] registered
[ 0.438851] acpiphp: Slot [13] registered
[ 0.439851] acpiphp: Slot [14] registered
[ 0.440851] acpiphp: Slot [15] registered
[ 0.441851] acpiphp: Slot [16] registered
[ 0.442852] acpiphp: Slot [17] registered
[ 0.443854] acpiphp: Slot [18] registered
[ 0.444866] acpiphp: Slot [19] registered
[ 0.445851] acpiphp: Slot [20] registered
[ 0.446851] acpiphp: Slot [21] registered
[ 0.447866] acpiphp: Slot [22] registered
[ 0.448851] acpiphp: Slot [23] registered
[ 0.449851] acpiphp: Slot [24] registered
[ 0.450853] acpiphp: Slot [25] registered
[ 0.451854] acpiphp: Slot [26] registered
[ 0.452851] acpiphp: Slot [27] registered
[ 0.453851] acpiphp: Slot [28] registered
[ 0.454852] acpiphp: Slot [29] registered
[ 0.455851] acpiphp: Slot [30] registered
[ 0.456851] acpiphp: Slot [31] registered
[ 0.457847] PCI host bridge to bus 0000:00
[ 0.458834] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.459830] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.460830] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.461830] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.462830] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.463830] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.464897] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.466616] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.468452] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.470341] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.470904] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.471830] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.472830] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.473830] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.475096] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.476983] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.477844] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.479177] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.481896] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.482902] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.483890] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.485049] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.487421] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.490732] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.490849] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.491893] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.492847] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.495749] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.497845] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.498844] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.499880] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.503213] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.505564] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.505851] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.506881] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.510481] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.511866] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.512942] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.513940] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.514896] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.516344] iommu: Default domain type: Translated
[ 0.516830] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.518031] SCSI subsystem initialized
[ 0.518929] pps_core: LinuxPPS API ver. 1 registered
[ 0.519830] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.520833] PTP clock support registered
[ 0.522178] PCI: Using ACPI for IRQ routing
[ 0.523923] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.524872] clocksource: Switched to clocksource kvm-clock
[ 0.526519] VFS: Disk quotas dquot_6.6.0
[ 0.527408] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.529010] pnp: PnP ACPI init
[ 0.529978] pnp: PnP ACPI: found 6 devices
[ 0.538779] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.540817] NET: Registered PF_INET protocol family
[ 0.541958] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.551962] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.553982] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.555804] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.557638] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.559325] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.560918] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.562603] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.564107] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.565748] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.566993] NET: Registered PF_XDP protocol family
[ 0.568110] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.569453] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.570812] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.572217] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.573670] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.575290] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.576557] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.578006] PCI: CLS 0 bytes, default 64
[ 0.578948] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.579049] Unpacking initramfs...
[ 0.580345] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.582827] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.585273] Initialise system trusted keyrings
[ 0.586466] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.588006] Key type asymmetric registered
[ 0.588891] Asymmetric key parser 'x509' registered
[ 0.589961] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.591668] io scheduler mq-deadline registered
[ 0.592937] io scheduler kyber registered
[ 0.594007] io scheduler bfq registered
[ 0.596694] ERST DBG: ERST support is disabled.
[ 0.598345] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.601396] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.605033] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.612636] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.614750] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.617932] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.620301] scsi host0: ata_piix
[ 0.621702] scsi host1: ata_piix
[ 0.622621] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.624410] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.626289] hv_vmbus: registering driver hv_netvsc
[ 0.627644] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.630606] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.631779] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.633002] hv_vmbus: registering driver hyperv_keyboard
[ 0.634333] rtc_cmos 00:05: RTC can wake from S4
[ 0.636363] rtc_cmos 00:05: registered as rtc0
[ 0.637527] rtc_cmos 00:05: setting system clock to 2026-07-15T06:46:22 UTC (1784097982)
[ 0.639552] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.641385] intel_pstate: CPU model not supported
[ 0.642786] gre: GRE over IPv4 demultiplexer driver
[ 0.644014] NET: Registered PF_INET6 protocol family
[ 0.645365] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.645570] Segment Routing with IPv6
[ 0.648185] In-situ OAM (IOAM) with IPv6
[ 0.649376] Key type dns_resolver registered
[ 0.650594] IPI shorthand broadcast: enabled
[ 0.654680] sched_clock: Marking stable (471121073, 183114216)->(737325998, -83090709)
[ 0.656913] registered taskstats version 1
[ 0.658210] Loading compiled-in X.509 certificates
[ 0.662227] Freeing initrd memory: 9912K
[ 0.667497] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.672642] Demotion targets for Node 0: null
[ 0.674162] Key type .fscrypt registered
[ 0.675211] Key type fscrypt-provisioning registered
[ 0.783703] ata2: found unknown device (class 0)
[ 0.785275] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.787714] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.803663] Freeing unused kernel image (initmem) memory: 2988K
[ 0.804720] Write protecting the kernel read-only data: 26624k
[ 0.806680] Freeing unused kernel image (text/rodata gap) memory: 1804K
[ 0.807823] Freeing unused kernel image (rodata/data gap) memory: 592K
[ 0.808795] rodata_test: all tests were successful
[ 0.809552] Run /init as init process
[ 0.817710] Alpine Init 3.13.0-r0
Alpine Init 3.13.0-r0
[ 0.819030] Loading boot drivers...
* Loading boot drivers: [ 0.836738] ACPI: bus type USB registered
[ 0.837641] usbcore: registered new interface driver usbfs
[ 0.838746] usbcore: registered new interface driver hub
[ 0.839834] usbcore: registered new device driver usb
[ 0.843634] usbcore: registered new interface driver usb-storage
[ 0.888612] loop: module loaded
[ 0.918261] ACPI: bus type drm_connector registered
[ 0.937274] Loading boot drivers: ok.
ok.
[ 0.939265] Mounting root...
* Mounting root: [ 0.960036] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 0.961183] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 0.965807] [drm] Found bochs VGA, ID 0xb0c5.
[ 0.966564] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 0.967822] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 0.981821] Console: switching to colour frame buffer device 160x50
[ 0.984032] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.020013] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.021073] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.057754] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.060468] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.066079] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.068747] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.107687] block sr0: the capability attribute has been deprecated.
[ 1.852053] EXT4-fs (vda): mounted filesystem 325df078-35f9-4b5e-a95e-82778457688f ro with ordered data mode. Quota mode: none.
[ 1.853890] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.63 is starting up Linux 6.18.7-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
[ 2.280186] random: crng init done
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting trace filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Mounting bpf filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5520/51200 files, 171729/204800 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 25.3 running 'init-local' at Wed, 15 Jul 2026 06:46:24 +0000. Up 3.15 seconds.
[ ok ]
* Setting hostname to localhost from /etc/hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.3.0 starting
DUID 00:01:00:01:31:e9:e9:41:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::fee2:7caa:17c9:7899/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 25.3 running 'init' at Wed, 15 Jul 2026 06:46:37 +0000. Up 16.11 seconds.
ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::fee2:7caa:17c9:7899/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:cfViEGCro3tS4A2UPuEL4c6rG+SYpq9QDTpma8fQFZU root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| o..+.o.. |
| . + .E . o . |
| ..= o o . o . |
| .+oB . o . . |
|oB.+.*o S |
|*+* o.o. |
|== +.. |
|=.o ... |
|==. .o |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:R32kSfcSWpdscFOfCAQlPNRoTm+0w5bZY3Fk9RuHQFc root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| o+*=+.X*E|
| *.=.@+X=|
| + * X.Bo=|
| o X = .+|
| S + o .. |
| . |
| |
| |
| |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:7YdQXFr9lqDG9aeAIWXiujH2pVb4uc3EDqpFzRExSuc root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| o.B.o. |
| o.B.* o. |
| o.Eoo o..|
| . *.=. o+|
| = S B . o.|
| . * B + . |
| . = * + |
| o . O |
| ... . + |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 25.3 running 'modules:config' at Wed, 15 Jul 2026 06:46:38 +0000. Up 16.91 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 25.3 running 'modules:final' at Wed, 15 Jul 2026 06:46:38 +0000. Up 17.36 seconds.
(1/1) Installing ca-certificates (20260611-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20260611-r0.trigger
OK: 136.1 MiB in 208 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
2026-07-15 06:46:40,439 - cc_keys_to_console.py[WARNING]: Unable to activate module keys_to_console, helper tool not found at /usr/lib/cloud-init/write-ssh-key-fingerprints
Cloud-init v. 25.3 finished at Wed, 15 Jul 2026 06:46:40 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 18.95 seconds
[ ok ]
Welcome to Alpine Linux 3.23
Kernel 6.18.7-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
........status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.3-r1 -> 3.0.6-r0)
(2/2) Upgrading apk-tools (3.0.3-r1 -> 3.0.6-r0)
Executing busybox-1.37.0-r30.trigger
Continuing with the main upgrade transaction:
( 1/36) Upgrading alpine-baselayout-data (3.7.1-r8 -> 3.7.2-r0)
Installing file to etc/fstab.apk-new
Installing file to etc/group.apk-new
Installing file to etc/hostname.apk-new
Installing file to etc/inittab.apk-new
Installing file to etc/passwd.apk-new
Installing file to etc/profile.apk-new
Installing file to etc/shadow.apk-new
( 2/36) Upgrading musl (1.2.5-r21 -> 1.2.5-r23)
( 3/36) Upgrading alpine-baselayout (3.7.1-r8 -> 3.7.2-r0)
Executing alpine-baselayout-3.7.2-r0.pre-upgrade
Installing file to etc/motd.apk-new
Executing alpine-baselayout-3.7.2-r0.post-upgrade
( 4/36) Upgrading libcap2 (2.77-r0 -> 2.78-r0)
( 5/36) Upgrading alpine-release (3.23.3-r0 -> 3.23.5-r0)
( 6/36) Upgrading libcrypto3 (3.5.5-r0 -> 3.5.7-r0)
( 7/36) Upgrading libssl3 (3.5.5-r0 -> 3.5.7-r0)
( 8/36) Upgrading zlib (1.3.1-r2 -> 1.3.2-r0)
( 9/36) Upgrading ca-certificates-bundle (20251003-r0 -> 20260611-r0)
Installing file to etc/ssl/certs/ca-certificates.crt.apk-new
(10/36) Upgrading musl-utils (1.2.5-r21 -> 1.2.5-r23)
(11/36) Upgrading alpine-base (3.23.3-r0 -> 3.23.5-r0)
(12/36) Upgrading p11-kit (0.25.5-r2 -> 0.26.2-r0)
(13/36) Upgrading gnutls (3.8.11-r0 -> 3.8.13-r0)
(14/36) Upgrading chrony (4.8-r1 -> 4.8-r2)
Executing chrony-4.8-r2.pre-upgrade
(15/36) Upgrading chrony-openrc (4.8-r1 -> 4.8-r2)
(16/36) Upgrading libblkid (2.41.2-r0 -> 2.41.4-r0)
(17/36) Upgrading blkid (2.41.2-r0 -> 2.41.4-r0)
(18/36) Upgrading libsmartcols (2.41.2-r0 -> 2.41.4-r0)
(19/36) Upgrading partx (2.41.2-r0 -> 2.41.4-r0)
(20/36) Upgrading libuuid (2.41.2-r0 -> 2.41.4-r0)
(21/36) Upgrading libfdisk (2.41.2-r0 -> 2.41.4-r0)
(22/36) Upgrading sfdisk (2.41.2-r0 -> 2.41.4-r0)
(23/36) Upgrading libexpat (2.7.3-r0 -> 2.8.2-r0)
(24/36) Upgrading xz-libs (5.8.2-r0 -> 5.8.3-r0)
(25/36) Upgrading python3 (3.12.12-r0 -> 3.12.13-r0)
(26/36) Upgrading python3-pycache-pyc0 (3.12.12-r0 -> 3.12.13-r0)
(27/36) Upgrading pyc (3.12.12-r0 -> 3.12.13-r0)
(28/36) Upgrading python3-pyc (3.12.12-r0 -> 3.12.13-r0)
(29/36) Upgrading py3-requests (2.32.5-r0 -> 2.33.1-r0)
(30/36) Upgrading py3-requests-pyc (2.32.5-r0 -> 2.33.1-r0)
(31/36) Upgrading tzdata (2025c-r0 -> 2026c-r0)
(32/36) Upgrading linux-virt (6.18.7-r0 -> 6.18.38-r0)
(33/36) Upgrading libmount (2.41.2-r0 -> 2.41.4-r0)
(34/36) Upgrading mount (2.41.2-r0 -> 2.41.4-r0)
(35/36) Upgrading libnvmemi (1.16.1-r0 -> 1.16.2-r0)
(36/36) Upgrading libnvme (1.16.1-r0 -> 1.16.2-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20260611-r0.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.13.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.38-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 136.8 MiB in 208 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/9) Installing c-ares (1.34.8-r0)
(2/9) Installing nghttp2-libs (1.69.0-r0)
(3/9) Installing libpsl (0.21.5-r3)
(4/9) Installing libcurl (8.20.0-r0)
(5/9) Installing pcre2 (10.47-r0)
(6/9) Installing git (2.52.0-r0)
(7/9) Installing git-init-template (2.52.0-r0)
(8/9) Installing gnu-libiconv-libs (1.18-r0)
(9/9) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r30.trigger
OK: 146.3 MiB in 217 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/acid.git acid
Cloning into 'acid'...
remote: Enumerating objects: 136, done.
remote: Counting objects: 100% (136/136), done.
remote: Compressing objects: 100% (135/135), done.
remote: Total 136 (delta 85), reused 0 (delta 0), pack-reused 0 (from 0)
Receiving objects: 100% (136/136), 66.53 KiB | 11.09 MiB/s, done.
Resolving deltas: 100% (85/85), done.
+ cd acid
+ git -c 'advice.detachedHead=false' checkout 72f8c18e17ad58a2adccaba05089ccf5b75682c2
HEAD is now at 72f8c18 Check Gitea responses from commit status creation
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=72f8c18
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/72f8c18/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base go asciidoctor
( 1/22) Installing ruby-libs (3.4.9-r0)
( 2/22) Installing libucontext (1.3.3-r0)
( 3/22) Installing ruby (3.4.9-r0)
( 4/22) Installing asciidoctor (2.0.26-r0)
( 5/22) Installing jansson (2.14.1-r0)
( 6/22) Installing binutils (2.45.1-r0)
( 7/22) Installing libmagic (5.46-r2)
( 8/22) Installing file (5.46-r2)
( 9/22) Installing libgomp (15.2.0-r2)
(10/22) Installing libatomic (15.2.0-r2)
(11/22) Installing isl26 (0.26-r1)
(12/22) Installing mpfr4 (4.2.2-r0)
(13/22) Installing mpc1 (1.3.1-r1)
(14/22) Installing gcc (15.2.0-r2)
(15/22) Installing libstdc++-dev (15.2.0-r2)
(16/22) Installing musl-dev (1.2.5-r23)
(17/22) Installing g++ (15.2.0-r2)
(18/22) Installing make (4.4.1-r3)
(19/22) Installing fortify-headers (1.1-r5)
(20/22) Installing patch (2.8-r0)
(21/22) Installing build-base (0.5-r3)
(22/22) Installing go (1.25.10-r0)
Executing busybox-1.37.0-r30.trigger
OK: 580.6 MiB in 239 packages
+ make all test
go build -ldflags "-X 'main.projectVersion=dev'" -o acid
go: downloading github.com/mattn/go-sqlite3 v1.14.33
go: downloading github.com/pkg/sftp v1.13.10
go: downloading golang.org/x/crypto v0.46.0
go: downloading gopkg.in/yaml.v3 v3.0.1
go: downloading github.com/kr/fs v0.1.0
asciidoctor -b manpage -a release-version=dev -o acid.1 acid.adoc || \
a2x -d manpage -f manpage -a release-version=dev acid.adoc
go test
PASS
ok janouch.name/acid 0.002s
Deploy log