- Created
- 35d ago
- Changed
- 35d ago
- Project
- p/termo
- Commit
- a8f3f6eca3fec9e7faf85d97201a567d73636662
- Runner
- Alpine 3.24
- State
- Success
- Notified
- 1
- Duration
- 49s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.7-0-virt (buildozer@build-3-23-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-01-26 18:22:53
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 10852552830 cycles
[ 0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000007] tsc: Detected 3096.006 MHz processor
[ 0.000510] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000536] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000538] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000572] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007636] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007803] RAMDISK: [mem 0x7f652000-0x7fffffff]
[ 0.007804] ACPI: Early table checksum verification disabled
[ 0.007807] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007810] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007814] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007818] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007820] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007823] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007825] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007827] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007829] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007830] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007830] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007831] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007831] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007832] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.008291] No NUMA configuration found
[ 0.008292] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.008294] NODE_DATA(0) allocated [mem 0x13fff8d40-0x13fffcfff]
[ 0.008314] Zone ranges:
[ 0.008314] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008315] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008316] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008317] Movable zone start for each node
[ 0.008318] Early memory node ranges
[ 0.008318] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.008319] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.008320] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008321] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.008407] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.008419] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.014376] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.015017] ACPI: PM-Timer IO Port: 0x608
[ 0.015030] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.015063] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.015065] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.015067] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.015068] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.015068] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.015069] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.015072] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.015073] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.015080] CPU topo: Max. logical packages: 1
[ 0.015081] CPU topo: Max. logical dies: 1
[ 0.015081] CPU topo: Max. dies per package: 1
[ 0.015084] CPU topo: Max. threads per core: 1
[ 0.015085] CPU topo: Num. cores per package: 4
[ 0.015085] CPU topo: Num. threads per package: 4
[ 0.015085] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.015100] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.015118] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.015140] Booting paravirtualized kernel on KVM
[ 0.015142] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.019053] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.019300] percpu: Embedded 55 pages/cpu s185240 r8192 d31848 u524288
[ 0.019324] kvm-guest: PV spinlocks disabled, no host support
[ 0.019325] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.019363] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.019366] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.019687] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.019847] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.019915] software IO TLB: area num 4.
[ 0.031815] Fallback order for Node 0: 0
[ 0.031819] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.031820] Policy zone: Normal
[ 0.032013] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.044180] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.044246] Kernel/User page tables isolation: enabled
[ 0.044964] Dynamic Preempt: none
[ 0.045119] rcu: Preemptible hierarchical RCU implementation.
[ 0.045120] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.045121] Trampoline variant of Tasks RCU enabled.
[ 0.045121] Tracing variant of Tasks RCU enabled.
[ 0.045122] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.045123] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.045129] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.045130] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.049213] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.049395] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.049475] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.056292] Console: colour VGA+ 80x25
[ 0.056344] printk: legacy console [ttyS0] enabled
[ 0.207479] ACPI: Core revision 20250807
[ 0.208584] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.210829] APIC: Switch to symmetric I/O mode setup
[ 0.212212] x2apic enabled
[ 0.213187] APIC: Switched APIC routing to: physical x2apic
[ 0.215600] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.216988] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.219316] Calibrating delay loop (skipped) preset value.. 6192.01 BogoMIPS (lpj=3096006)
[ 0.220410] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.221316] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.222319] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.223316] Speculative Store Bypass: Vulnerable
[ 0.224317] Spectre V2 : Mitigation: Retpolines
[ 0.225316] ITS: Mitigation: Aligned branch/return thunks
[ 0.226316] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.227316] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.228316] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.229317] active return thunk: its_return_thunk
[ 0.230317] x86/fpu: x87 FPU will use FXSAVE
[ 0.245988] Freeing SMP alternatives memory: 40K
[ 0.246319] pid_max: default: 32768 minimum: 301
[ 0.248566] LSM: initializing lsm=lockdown,capability,landlock
[ 0.249732] landlock: Up and running.
[ 0.250432] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.251319] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.355507] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.356519] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.357343] signal: max sigframe size: 1440
[ 0.358373] rcu: Hierarchical SRCU implementation.
[ 0.359317] rcu: Max phase no-delay instances is 400.
[ 0.360379] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.364919] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.365365] smp: Bringing up secondary CPUs ...
[ 0.366406] smpboot: x86: Booting SMP configuration:
[ 0.367319] .... node #0, CPUs: #1 #2 #3
[ 0.371371] smp: Brought up 1 node, 4 CPUs
[ 0.373318] smpboot: Total of 4 processors activated (24768.04 BogoMIPS)
[ 0.374499] Memory: 4000132K/4193760K available (14578K kernel code, 2022K rwdata, 9648K rodata, 2988K init, 1224K bss, 188744K reserved, 0K cma-reserved)
[ 0.376465] devtmpfs: initialized
[ 0.377392] x86/mm: Memory block size: 128MB
[ 0.378757] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.379337] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.380323] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.382058] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.382452] audit: initializing netlink subsys (disabled)
[ 0.383328] audit: type=2000 audit(1784433458.589:1): state=initialized audit_enabled=0 res=1
[ 0.383374] thermal_sys: Registered thermal governor 'step_wise'
[ 0.384327] cpuidle: using governor ladder
[ 0.386321] cpuidle: using governor menu
[ 0.387419] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.388582] PCI: Using configuration type 1 for base access
[ 0.389402] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.391359] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.392316] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.393532] ACPI: Added _OSI(Module Device)
[ 0.394317] ACPI: Added _OSI(Processor Device)
[ 0.395316] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.397642] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.399792] ACPI: Interpreter enabled
[ 0.400336] ACPI: PM: (supports S0 S3 S5)
[ 0.401316] ACPI: Using IOAPIC for interrupt routing
[ 0.402326] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.403316] PCI: Using E820 reservations for host bridge windows
[ 0.404390] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.407684] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.408320] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.410317] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.412323] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.415524] acpiphp: Slot [3] registered
[ 0.416299] acpiphp: Slot [4] registered
[ 0.417336] acpiphp: Slot [5] registered
[ 0.418338] acpiphp: Slot [6] registered
[ 0.419336] acpiphp: Slot [7] registered
[ 0.420337] acpiphp: Slot [8] registered
[ 0.421339] acpiphp: Slot [9] registered
[ 0.422220] acpiphp: Slot [10] registered
[ 0.422336] acpiphp: Slot [11] registered
[ 0.423337] acpiphp: Slot [12] registered
[ 0.424339] acpiphp: Slot [13] registered
[ 0.425338] acpiphp: Slot [14] registered
[ 0.426336] acpiphp: Slot [15] registered
[ 0.427336] acpiphp: Slot [16] registered
[ 0.428262] acpiphp: Slot [17] registered
[ 0.429234] acpiphp: Slot [18] registered
[ 0.430336] acpiphp: Slot [19] registered
[ 0.431336] acpiphp: Slot [20] registered
[ 0.432338] acpiphp: Slot [21] registered
[ 0.433360] acpiphp: Slot [22] registered
[ 0.434338] acpiphp: Slot [23] registered
[ 0.435266] acpiphp: Slot [24] registered
[ 0.435336] acpiphp: Slot [25] registered
[ 0.436343] acpiphp: Slot [26] registered
[ 0.437336] acpiphp: Slot [27] registered
[ 0.438336] acpiphp: Slot [28] registered
[ 0.439339] acpiphp: Slot [29] registered
[ 0.440336] acpiphp: Slot [30] registered
[ 0.441336] acpiphp: Slot [31] registered
[ 0.442250] PCI host bridge to bus 0000:00
[ 0.443319] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.444316] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.446316] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.448317] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.449316] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.451316] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.452375] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.455126] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.457931] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.461097] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.462379] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.464317] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.465316] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.467316] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.468619] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.472316] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.473330] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.476316] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.480362] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.482342] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.484365] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.486483] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.488808] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.493139] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.494343] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.496351] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.498329] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.501813] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.505986] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.507331] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.509368] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.512550] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.520316] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.522332] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.524368] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.527316] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.529442] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.531432] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.533446] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.535426] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.536843] iommu: Default domain type: Translated
[ 0.538316] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.540418] SCSI subsystem initialized
[ 0.542355] pps_core: LinuxPPS API ver. 1 registered
[ 0.543321] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.545320] PTP clock support registered
[ 0.547650] PCI: Using ACPI for IRQ routing
[ 0.549408] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.550368] clocksource: Switched to clocksource kvm-clock
[ 0.553132] VFS: Disk quotas dquot_6.6.0
[ 0.554247] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.556365] pnp: PnP ACPI init
[ 0.557553] pnp: PnP ACPI: found 6 devices
[ 0.565644] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.568505] NET: Registered PF_INET protocol family
[ 0.570005] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.580951] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.583064] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.584846] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.586806] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.588454] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.590152] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.591835] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.593332] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.594998] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.596258] NET: Registered PF_XDP protocol family
[ 0.597472] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.598984] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.600361] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.601965] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.603408] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.604933] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.606146] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.607491] PCI: CLS 0 bytes, default 64
[ 0.608320] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.608402] Unpacking initramfs...
[ 0.609666] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.609722] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.614542] Initialise system trusted keyrings
[ 0.615638] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.617171] Key type asymmetric registered
[ 0.618062] Asymmetric key parser 'x509' registered
[ 0.619139] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.620843] io scheduler mq-deadline registered
[ 0.621854] io scheduler kyber registered
[ 0.622802] io scheduler bfq registered
[ 0.629480] ERST DBG: ERST support is disabled.
[ 0.631145] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.635128] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.638960] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.641636] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.643262] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.645878] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.647883] scsi host0: ata_piix
[ 0.648827] scsi host1: ata_piix
[ 0.649646] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.651400] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.653189] hv_vmbus: registering driver hv_netvsc
[ 0.654493] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.657214] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.658346] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.659473] hv_vmbus: registering driver hyperv_keyboard
[ 0.660727] rtc_cmos 00:05: RTC can wake from S4
[ 0.662515] rtc_cmos 00:05: registered as rtc0
[ 0.662812] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.663698] rtc_cmos 00:05: setting system clock to 2026-07-19T03:57:38 UTC (1784433458)
[ 0.667544] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.669404] intel_pstate: CPU model not supported
[ 0.670817] gre: GRE over IPv4 demultiplexer driver
[ 0.672127] NET: Registered PF_INET6 protocol family
[ 0.673773] Segment Routing with IPv6
[ 0.674744] In-situ OAM (IOAM) with IPv6
[ 0.675875] Key type dns_resolver registered
[ 0.676976] IPI shorthand broadcast: enabled
[ 0.680085] sched_clock: Marking stable (515018811, 164913627)->(708440939, -28508501)
[ 0.682349] registered taskstats version 1
[ 0.683517] Loading compiled-in X.509 certificates
[ 0.685409] Freeing initrd memory: 9912K
[ 0.690299] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.694463] Demotion targets for Node 0: null
[ 0.695633] Key type .fscrypt registered
[ 0.696584] Key type fscrypt-provisioning registered
[ 0.809043] ata2: found unknown device (class 0)
[ 0.814580] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.823041] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.855760] Freeing unused kernel image (initmem) memory: 2988K
[ 0.858638] Write protecting the kernel read-only data: 26624k
[ 0.864246] Freeing unused kernel image (text/rodata gap) memory: 1804K
[ 0.867725] Freeing unused kernel image (rodata/data gap) memory: 592K
[ 0.870698] rodata_test: all tests were successful
[ 0.872986] Run /init as init process
[ 0.893533] Alpine Init 3.13.0-r0
Alpine Init 3.13.0-r0
[ 0.897017] Loading boot drivers...
* Loading boot drivers: [ 0.936925] ACPI: bus type USB registered
[ 0.937898] usbcore: registered new interface driver usbfs
[ 0.939161] usbcore: registered new interface driver hub
[ 0.940216] usbcore: registered new device driver usb
[ 0.944730] usbcore: registered new interface driver usb-storage
[ 0.990412] loop: module loaded
[ 1.019332] ACPI: bus type drm_connector registered
[ 1.039027] Loading boot drivers: ok.
ok.
[ 1.041268] Mounting root...
* Mounting root: [ 1.054000] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.055223] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.061457] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.062159] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.063540] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.077111] Console: switching to colour frame buffer device 160x50
[ 1.079117] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.127751] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.128787] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.176234] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.183167] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.187261] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.191912] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.232406] block sr0: the capability attribute has been deprecated.
[ 1.962685] EXT4-fs (vda): mounted filesystem 325df078-35f9-4b5e-a95e-82778457688f ro with ordered data mode. Quota mode: none.
[ 1.970827] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.63 is starting up Linux 6.18.7-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
[ 2.512970] random: crng init done
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting trace filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Mounting bpf filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5520/51200 files, 171729/204800 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 25.3 running 'init-local' at Sun, 19 Jul 2026 03:57:40 +0000. Up 3.66 seconds.
[ ok ]
* Setting hostname to localhost from /etc/hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.3.0 starting
DUID 00:01:00:01:31:ef:07:b5:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::3220:1be:c29a:795d/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 25.3 running 'init' at Sun, 19 Jul 2026 03:57:55 +0000. Up 18.00 seconds.
ci-info: ++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::3220:1be:c29a:795d/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+-----------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:sraiBrkFzC53AqFfSc9kZnKZfuCj4Ej/ttaX9Jwj+tk root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| o |
|. o X |
|+. . & . |
|++. o * . |
|oB.o ..oS |
|=.*.o o . |
|.= o. + . + . |
|. . .= o +o= |
| ...ooo.+o.E. |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:cX4tZcXav4PjENjobDSyrNfEiid5owEyc5jnro60z2Q root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| ..|
| ..|
| . . oo |
| o ++ +. .|
| * + .S=.oo . .|
| B . . *o.... .|
| . E .oo++ . . .|
|o * +o*.. .o o |
|o+o+ o* . ... .|
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:RmXFnMEtKWuSzJQ6DSk9Jl9ipSb4Cg6WJXkBXUyMdXs root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| .o.B= +..o=o= |
| .++oX.=o. B . |
| o.o.*o%.E o . |
| =. o+.B o |
|oo . .So |
|+. . . |
| .. |
| |
| |
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 25.3 running 'modules:config' at Sun, 19 Jul 2026 03:57:56 +0000. Up 18.90 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 25.3 running 'modules:final' at Sun, 19 Jul 2026 03:57:56 +0000. Up 19.34 seconds.
(1/1) Installing ca-certificates (20260611-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20260611-r0.trigger
OK: 136.1 MiB in 208 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
2026-07-19 03:57:58,121 - cc_keys_to_console.py[WARNING]: Unable to activate module keys_to_console, helper tool not found at /usr/lib/cloud-init/write-ssh-key-fingerprints
Cloud-init v. 25.3 finished at Sun, 19 Jul 2026 03:57:58 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 20.91 seconds
[ ok ]
Welcome to Alpine Linux 3.23
Kernel 6.18.7-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
..status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.3-r1 -> 3.0.6-r0)
(2/2) Upgrading apk-tools (3.0.3-r1 -> 3.0.6-r0)
Executing busybox-1.37.0-r30.trigger
Continuing with the main upgrade transaction:
( 1/36) Upgrading alpine-baselayout-data (3.7.1-r8 -> 3.7.2-r0)
Installing file to etc/fstab.apk-new
Installing file to etc/group.apk-new
Installing file to etc/hostname.apk-new
Installing file to etc/inittab.apk-new
Installing file to etc/passwd.apk-new
Installing file to etc/profile.apk-new
Installing file to etc/shadow.apk-new
( 2/36) Upgrading musl (1.2.5-r21 -> 1.2.5-r23)
( 3/36) Upgrading alpine-baselayout (3.7.1-r8 -> 3.7.2-r0)
Executing alpine-baselayout-3.7.2-r0.pre-upgrade
Installing file to etc/motd.apk-new
Executing alpine-baselayout-3.7.2-r0.post-upgrade
( 4/36) Upgrading libcap2 (2.77-r0 -> 2.78-r0)
( 5/36) Upgrading alpine-release (3.23.3-r0 -> 3.23.5-r0)
( 6/36) Upgrading libcrypto3 (3.5.5-r0 -> 3.5.7-r0)
( 7/36) Upgrading libssl3 (3.5.5-r0 -> 3.5.7-r0)
( 8/36) Upgrading zlib (1.3.1-r2 -> 1.3.2-r0)
( 9/36) Upgrading ca-certificates-bundle (20251003-r0 -> 20260611-r0)
Installing file to etc/ssl/certs/ca-certificates.crt.apk-new
(10/36) Upgrading musl-utils (1.2.5-r21 -> 1.2.5-r23)
(11/36) Upgrading alpine-base (3.23.3-r0 -> 3.23.5-r0)
(12/36) Upgrading p11-kit (0.25.5-r2 -> 0.26.2-r0)
(13/36) Upgrading gnutls (3.8.11-r0 -> 3.8.13-r0)
(14/36) Upgrading chrony (4.8-r1 -> 4.8-r2)
Executing chrony-4.8-r2.pre-upgrade
(15/36) Upgrading chrony-openrc (4.8-r1 -> 4.8-r2)
(16/36) Upgrading libblkid (2.41.2-r0 -> 2.41.4-r0)
(17/36) Upgrading blkid (2.41.2-r0 -> 2.41.4-r0)
(18/36) Upgrading libsmartcols (2.41.2-r0 -> 2.41.4-r0)
(19/36) Upgrading partx (2.41.2-r0 -> 2.41.4-r0)
(20/36) Upgrading libuuid (2.41.2-r0 -> 2.41.4-r0)
(21/36) Upgrading libfdisk (2.41.2-r0 -> 2.41.4-r0)
(22/36) Upgrading sfdisk (2.41.2-r0 -> 2.41.4-r0)
(23/36) Upgrading libexpat (2.7.3-r0 -> 2.8.2-r0)
(24/36) Upgrading xz-libs (5.8.2-r0 -> 5.8.3-r0)
(25/36) Upgrading python3 (3.12.12-r0 -> 3.12.13-r0)
(26/36) Upgrading python3-pycache-pyc0 (3.12.12-r0 -> 3.12.13-r0)
(27/36) Upgrading pyc (3.12.12-r0 -> 3.12.13-r0)
(28/36) Upgrading python3-pyc (3.12.12-r0 -> 3.12.13-r0)
(29/36) Upgrading py3-requests (2.32.5-r0 -> 2.33.1-r0)
(30/36) Upgrading py3-requests-pyc (2.32.5-r0 -> 2.33.1-r0)
(31/36) Upgrading tzdata (2025c-r0 -> 2026c-r0)
(32/36) Upgrading linux-virt (6.18.7-r0 -> 6.18.38-r0)
(33/36) Upgrading libmount (2.41.2-r0 -> 2.41.4-r0)
(34/36) Upgrading mount (2.41.2-r0 -> 2.41.4-r0)
(35/36) Upgrading libnvmemi (1.16.1-r0 -> 1.16.2-r0)
(36/36) Upgrading libnvme (1.16.1-r0 -> 1.16.2-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20260611-r0.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.13.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.38-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 136.8 MiB in 208 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/9) Installing c-ares (1.34.8-r0)
(2/9) Installing nghttp2-libs (1.69.0-r0)
(3/9) Installing libpsl (0.21.5-r3)
(4/9) Installing libcurl (8.20.0-r0)
(5/9) Installing pcre2 (10.47-r0)
(6/9) Installing git (2.52.0-r0)
(7/9) Installing git-init-template (2.52.0-r0)
(8/9) Installing gnu-libiconv-libs (1.18-r0)
(9/9) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r30.trigger
OK: 146.3 MiB in 217 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/termo.git termo
Cloning into 'termo'...
remote: Enumerating objects: 1982, done.
remote: Counting objects: 100% (43/43), done.
remote: Compressing objects: 100% (42/42), done.
remote: Total 1982 (delta 15), reused 0 (delta 0), pack-reused 1939 (from 1)
Receiving objects: 100% (1982/1982), 1.39 MiB | 19.83 MiB/s, done.
Resolving deltas: 100% (1260/1260), done.
+ cd termo
+ git -c 'advice.detachedHead=false' checkout a8f3f6eca3fec9e7faf85d97201a567d73636662
HEAD is now at a8f3f6e Add a passthrough mode flag
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=a8f3f6e
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/a8f3f6e/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake ncurses-dev glib-dev
( 1/61) Installing jansson (2.14.1-r0)
( 2/61) Installing binutils (2.45.1-r0)
( 3/61) Installing libmagic (5.46-r2)
( 4/61) Installing file (5.46-r2)
( 5/61) Installing libgomp (15.2.0-r2)
( 6/61) Installing libatomic (15.2.0-r2)
( 7/61) Installing isl26 (0.26-r1)
( 8/61) Installing mpfr4 (4.2.2-r0)
( 9/61) Installing mpc1 (1.3.1-r1)
(10/61) Installing gcc (15.2.0-r2)
(11/61) Installing libstdc++-dev (15.2.0-r2)
(12/61) Installing musl-dev (1.2.5-r23)
(13/61) Installing g++ (15.2.0-r2)
(14/61) Installing make (4.4.1-r3)
(15/61) Installing fortify-headers (1.1-r5)
(16/61) Installing patch (2.8-r0)
(17/61) Installing build-base (0.5-r3)
(18/61) Installing acl-libs (2.3.2-r1)
(19/61) Installing lz4-libs (1.10.0-r0)
(20/61) Installing libarchive (3.8.5-r0)
(21/61) Installing rhash-libs (1.4.6-r0)
(22/61) Installing libuv (1.52.1-r0)
(23/61) Installing cmake (4.1.3-r0)
(24/61) Installing pkgconf (2.5.1-r0)
(25/61) Installing bzip2-dev (1.0.8-r6)
(26/61) Installing libxml2 (2.13.9-r1)
(27/61) Installing libxml2-utils (2.13.9-r1)
(28/61) Installing docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.post-install
(29/61) Installing libxslt (1.1.43-r3)
(30/61) Installing docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.post-install
(31/61) Installing docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.post-install
(32/61) Installing docbook-xsl (1.79.2-r13)
(33/61) Installing xz (5.8.3-r0)
(34/61) Installing gettext-asprintf (0.24.1-r1)
(35/61) Installing libintl (0.24.1-r1)
(36/61) Installing gettext-libs (0.24.1-r1)
(37/61) Installing gettext-envsubst (0.24.1-r1)
(38/61) Installing gettext (0.24.1-r1)
(39/61) Installing gettext-dev (0.24.1-r1)
(40/61) Installing py3-parsing (3.2.5-r0)
(41/61) Installing py3-parsing-pyc (3.2.5-r0)
(42/61) Installing py3-packaging (25.0-r0)
(43/61) Installing py3-packaging-pyc (25.0-r0)
(44/61) Installing glib (2.86.3-r0)
(45/61) Installing linux-headers (6.16.12-r0)
(46/61) Installing libffi-dev (3.5.2-r0)
(47/61) Installing bsd-compat-headers (0.7.2-r6)
(48/61) Installing libformw (6.5_p20251123-r0)
(49/61) Installing libmenuw (6.5_p20251123-r0)
(50/61) Installing libncurses++ (6.5_p20251123-r0)
(51/61) Installing ncurses-dev (6.5_p20251123-r0)
(52/61) Installing libedit-dev (20251016.3.1-r0)
(53/61) Installing zlib-dev (1.3.2-r0)
(54/61) Installing libpcre2-16 (10.47-r0)
(55/61) Installing libpcre2-32 (10.47-r0)
(56/61) Installing pcre2-dev (10.47-r0)
(57/61) Installing liblastlog2 (2.41.4-r0)
(58/61) Installing sqlite (3.51.2-r0)
(59/61) Installing sqlite-dev (3.51.2-r0)
(60/61) Installing util-linux-dev (2.41.4-r0)
(61/61) Installing glib-dev (2.86.3-r0)
Executing busybox-1.37.0-r30.trigger
Executing glib-2.86.3-r0.trigger
* No schema files found: doing nothing.
OK: 532.7 MiB in 278 packages
+ cmake -B build '-DBUILD_TESTING=ON'
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Curses: /usr/lib/libcurses.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Found Ncursesw: ncursesw
-- Checking for modules 'glib-2.0;gio-2.0'
-- Found glib-2.0, version 2.86.3
-- Found gio-2.0, version 2.86.3
-- Checking for module 'unibilium>=0.1.0'
-- Package 'unibilium' not found
-- Configuring done (0.3s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/termo/build
+ cmake --build build -- package
[ 1%] Building C object CMakeFiles/termo.dir/termo.c.o
[ 3%] Building C object CMakeFiles/termo.dir/driver-csi.c.o
[ 5%] Building C object CMakeFiles/termo.dir/driver-ti.c.o
[ 7%] Linking C shared library libtermo-0.so
[ 7%] Built target termo
[ 8%] Building C object CMakeFiles/termo-static.dir/termo.c.o
[ 10%] Building C object CMakeFiles/termo-static.dir/driver-csi.c.o
[ 12%] Building C object CMakeFiles/termo-static.dir/driver-ti.c.o
[ 14%] Linking C static library libtermo-0.a
[ 14%] Built target termo-static
[ 16%] Building C object CMakeFiles/test-01base.dir/tests/01base.c.o
[ 17%] Building C object CMakeFiles/test-01base.dir/tests/taplib.c.o
[ 19%] Linking C executable test-01base
[ 19%] Built target test-01base
[ 21%] Building C object CMakeFiles/test-02getkey.dir/tests/02getkey.c.o
[ 23%] Building C object CMakeFiles/test-02getkey.dir/tests/taplib.c.o
[ 25%] Linking C executable test-02getkey
[ 25%] Built target test-02getkey
[ 26%] Building C object CMakeFiles/test-03utf8.dir/tests/03utf8.c.o
[ 28%] Building C object CMakeFiles/test-03utf8.dir/tests/taplib.c.o
[ 30%] Linking C executable test-03utf8
[ 30%] Built target test-03utf8
[ 32%] Building C object CMakeFiles/test-04flags.dir/tests/04flags.c.o
[ 33%] Building C object CMakeFiles/test-04flags.dir/tests/taplib.c.o
[ 35%] Linking C executable test-04flags
[ 35%] Built target test-04flags
[ 37%] Building C object CMakeFiles/test-05read.dir/tests/05read.c.o
[ 39%] Building C object CMakeFiles/test-05read.dir/tests/taplib.c.o
[ 41%] Linking C executable test-05read
[ 41%] Built target test-05read
[ 42%] Building C object CMakeFiles/test-06buffer.dir/tests/06buffer.c.o
[ 44%] Building C object CMakeFiles/test-06buffer.dir/tests/taplib.c.o
[ 46%] Linking C executable test-06buffer
[ 46%] Built target test-06buffer
[ 48%] Building C object CMakeFiles/test-10keyname.dir/tests/10keyname.c.o
[ 50%] Building C object CMakeFiles/test-10keyname.dir/tests/taplib.c.o
[ 51%] Linking C executable test-10keyname
[ 51%] Built target test-10keyname
[ 53%] Building C object CMakeFiles/test-11strfkey.dir/tests/11strfkey.c.o
[ 55%] Building C object CMakeFiles/test-11strfkey.dir/tests/taplib.c.o
[ 57%] Linking C executable test-11strfkey
[ 57%] Built target test-11strfkey
[ 58%] Building C object CMakeFiles/test-12strpkey.dir/tests/12strpkey.c.o
[ 60%] Building C object CMakeFiles/test-12strpkey.dir/tests/taplib.c.o
[ 62%] Linking C executable test-12strpkey
[ 62%] Built target test-12strpkey
[ 64%] Building C object CMakeFiles/test-13cmpkey.dir/tests/13cmpkey.c.o
[ 66%] Building C object CMakeFiles/test-13cmpkey.dir/tests/taplib.c.o
[ 67%] Linking C executable test-13cmpkey
[ 67%] Built target test-13cmpkey
[ 69%] Building C object CMakeFiles/test-20canon.dir/tests/20canon.c.o
[ 71%] Building C object CMakeFiles/test-20canon.dir/tests/taplib.c.o
[ 73%] Linking C executable test-20canon
[ 73%] Built target test-20canon
[ 75%] Building C object CMakeFiles/test-30mouse.dir/tests/30mouse.c.o
[ 76%] Building C object CMakeFiles/test-30mouse.dir/tests/taplib.c.o
[ 78%] Linking C executable test-30mouse
[ 78%] Built target test-30mouse
[ 80%] Building C object CMakeFiles/test-31position.dir/tests/31position.c.o
[ 82%] Building C object CMakeFiles/test-31position.dir/tests/taplib.c.o
[ 83%] Linking C executable test-31position
[ 83%] Built target test-31position
[ 85%] Building C object CMakeFiles/test-32modereport.dir/tests/32modereport.c.o
[ 87%] Building C object CMakeFiles/test-32modereport.dir/tests/taplib.c.o
[ 89%] Linking C executable test-32modereport
[ 89%] Built target test-32modereport
[ 91%] Building C object CMakeFiles/test-33focus.dir/tests/33focus.c.o
[ 92%] Building C object CMakeFiles/test-33focus.dir/tests/taplib.c.o
[ 94%] Linking C executable test-33focus
[ 94%] Built target test-33focus
[ 96%] Building C object CMakeFiles/test-39csi.dir/tests/39csi.c.o
[ 98%] Building C object CMakeFiles/test-39csi.dir/tests/taplib.c.o
[100%] Linking C executable test-39csi
[100%] Built target test-39csi
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: termo
CPack: - Install project: termo []
CPack: Create package
CPack: - package: /home/ci/termo/build/termo-a8f3f6e-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: termo
CPack: - Install project: termo []
CPack: Create package
CPack: - package: /home/ci/termo/build/termo-a8f3f6e-Linux-x86_64.zip generated.
+ cmake --build build -- test
Running tests...
Test project /home/ci/termo/build
Start 1: termo.01base
1/16 Test #1: termo.01base ..................... Passed 0.01 sec
Start 2: termo.02getkey
2/16 Test #2: termo.02getkey ................... Passed 0.00 sec
Start 3: termo.03utf8
3/16 Test #3: termo.03utf8 ..................... Passed 0.00 sec
Start 4: termo.04flags
4/16 Test #4: termo.04flags .................... Passed 0.00 sec
Start 5: termo.05read
5/16 Test #5: termo.05read ..................... Passed 0.00 sec
Start 6: termo.06buffer
6/16 Test #6: termo.06buffer ................... Passed 0.00 sec
Start 7: termo.10keyname
7/16 Test #7: termo.10keyname .................. Passed 0.00 sec
Start 8: termo.11strfkey
8/16 Test #8: termo.11strfkey .................. Passed 0.00 sec
Start 9: termo.12strpkey
9/16 Test #9: termo.12strpkey .................. Passed 0.00 sec
Start 10: termo.13cmpkey
10/16 Test #10: termo.13cmpkey ................... Passed 0.00 sec
Start 11: termo.20canon
11/16 Test #11: termo.20canon .................... Passed 0.00 sec
Start 12: termo.30mouse
12/16 Test #12: termo.30mouse .................... Passed 0.00 sec
Start 13: termo.31position
13/16 Test #13: termo.31position ................. Passed 0.00 sec
Start 14: termo.32modereport
14/16 Test #14: termo.32modereport ............... Passed 0.00 sec
Start 15: termo.33focus
15/16 Test #15: termo.33focus .................... Passed 0.00 sec
Start 16: termo.39csi
16/16 Test #16: termo.39csi ...................... Passed 0.00 sec
100% tests passed, 0 tests failed out of 16
Total Test time (real) = 0.02 sec
Deploy log