- Project
- p/hex
- Commit
- 3071db8e19241229ffa384058f07b34919664615
- Runner
- OpenBSD 7.5
- State
- Success
- Notified
- 1
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=openbsd
+ acid_image=openbsd-7.3-2023-04-22.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/openbsd-7.3-2023-04-22.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/openbsd-7.3-2023-04-22.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 2 -m 2G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
c[?7l[2J[0mSeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
Using drive 0, partition 3.
Loading......
probing: pc0 com0 mem[639K 2046M a20=on]
disk: fd0 hd0+ hd1+*
>> OpenBSD/amd64 BOOT 3.55
switching console to com>> OpenBSD/amd64 BOOT 3.55
cannot open hd0a:/etc/random.seed: No such file or directory
booting hd0a:/bsd.gf: 39246760
+1647616+3886216+0+704512 [109+440424+293778]=0xa667f0
entry point at 0xffffffff81001000
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.3 (RAMDISK_CD) #1063: Sat Mar 25 10:41:49 MDT 2023
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 2130550784 (2031MB)
avail mem = 2062024704 (1966MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0
acpi0 at bios0: ACPI 1.0
acpi0: tables DSDT FACP APIC HPET WAET
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: QEMU Virtual CPU version 2.5+, 1696.37 MHz, 0f-6b-01
cpu0: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,x2APIC,HV,NXE,LONG,LAHF,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 4MB 64b/line 16-way L2 cache, 16MB 64b/line 16-way L3 cache
cpu0: apic clock running at 999MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpihpet0 at acpi0: 100000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
"ACPI0006" at acpi0 not configured
acpipci0 at acpi0 PCI0
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"QEMU0002" at acpi0 not configured
com0 at acpi0 COM1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com0: console
acpicmos0 at acpi0
"ACPI0010" at acpi0 not configured
acpicpu at acpi0 not configured
pvbus0 at mainbus0: KVM
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
"Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
"Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
vga1: aperture needed
wsdisplay1 at vga1 mux 1
wsdisplay1: screen 0 added (80x25, vt100 emulation)
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address 52:54:00:12:34:56
virtio0: msix shared
virtio1 at pci0 dev 4 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio1
scsibus1 at vioblk0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, >
sd0: 6144MB, 512 bytes/sector, 12582912 sectors
virtio1: msix per-VQ
virtio2 at pci0 dev 5 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk1 at virtio2
scsibus2 at vioblk1: 1 targets
sd1 at scsibus2 targ 0 lun 0: <VirtIO, Block Device, >
sd1: 0MB, 512 bytes/sector, 732 sectors
virtio2: msix per-VQ
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay1
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
Primary GPT:
Not Found
Secondary GPT:
Not Found
MBR:
Disk: sd0 geometry: 783/255/63 [12582912 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
-------------------------------------------------------------------------------
0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
*3: A6 0 2 3 - 261 21 16 [ 128: 4194176 ] OpenBSD
growing filesystem on disk sd0
(msdos partition 3, disklabel partition a)
total number of sectors: 12582912
partition start offset: 128
calculated new partition size: 12582784
removing boot.conf: done.
modifying fdisk partition: done.
modifying disklabel partition: done.
growing filesystem: growfs: 6075.0MB (12441600 sectors) block size 16384, fragment size 2048
using 30 cylinder groups of 202.50MB, 12960 blks, 25920 inodes.
done.
checking filesystem: ** /dev/rsd0a
** Last Mounted on /mnt
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
29565 files, 704190 used, 2308489 free (161 frags, 288541 blocks, 0.0% fragmentation)
MARK FILE SYSTEM CLEAN? yes
***** FILE SYSTEM WAS MODIFIED *****
done.
rebooting system...
syncing disks... done
rebooting...
c[?7l[2J[0mSeaBIOS (version Arch Linux 1.16.3-1-1)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+7EFD3290+7EF33290 C900
Booting from Hard Disk...
Using drive 0, partition 3.
Loading......
probing: pc0 com0 mem[639K 2046M a20=on]
disk: fd0 hd0+ hd1+*
>> OpenBSD/amd64 BOOT 3.55
switching console to com>> OpenBSD/amd64 BOOT 3.55
cannot open hd0a:/etc/random.seed: No such file or directory
booting hd0a:/bsd: 169751280
+4121616+364576+0+1228800 [1317567+128+1311192+1005064]=0x191d720
entry point at 0xffffffff81001000
[ using 3634976 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.3 (GENERIC.MP) #1125: Sat Mar 25 10:36:29 MDT 2023
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2130550784 (2031MB)
avail mem = 2046644224 (1951MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP APIC HPET WAET
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: QEMU Virtual CPU version 2.5+, 1696.66 MHz, 0f-6b-01
cpu0: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,x2APIC,HV,NXE,LONG,LAHF,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 4MB 64b/line 16-way L2 cache, 16MB 64b/line 16-way L3 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 1000MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: QEMU Virtual CPU version 2.5+, 1696.59 MHz, 0f-6b-01
cpu1: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,x2APIC,HV,NXE,LONG,LAHF,MELTDOWN
cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 4MB 64b/line 16-way L2 cache, 16MB 64b/line 16-way L3 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
acpihpet0 at acpi0: 100000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
"ACPI0006" at acpi0 not configured
acpipci0 at acpi0 PCI0
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"QEMU0002" at acpi0 not configured
com0 at acpi0 COM1 addr 0x3f8/0x8 irq 4: ns16550a, 16 byte fifo
com0: console
acpicmos0 at acpi0
"ACPI0010" at acpi0 not configured
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
pvbus0 at mainbus0: KVM
pvclock0 at pvbus0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 2.5+> removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 0 int 9
iic0 at piixpm0
vga1 at pci0 dev 2 function 0 "Bochs VGA" rev 0x02
wsdisplay at vga1 not configured
virtio0 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio0: address 52:54:00:12:34:56
virtio0: msix shared
virtio1 at pci0 dev 4 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio1
scsibus2 at vioblk0: 1 targets
sd0 at scsibus2 targ 0 lun 0: <VirtIO, Block Device, >
sd0: 6144MB, 512 bytes/sector, 12582912 sectors
virtio1: msix per-VQ
virtio2 at pci0 dev 5 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk1 at virtio2
scsibus3 at vioblk1: 1 targets
sd1 at scsibus3 targ 0 lun 0: <VirtIO, Block Device, >
sd1: 0MB, 512 bytes/sector, 732 sectors
virtio2: msix per-VQ
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0 mux 1
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (21c0db6ee43e6dd4.a) swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/sd0a (21c0db6ee43e6dd4.a): file system is clean; not checking
pf enabled
starting network
WARNING: /etc/hostname.vio0 is insecure, fixing permissions.
dd: /var/db/host.random: No such file or directory
chmod: /var/db/host.random: No such file or directory
reordering: ld.so libcfd0 at fdc0 drive 1: density unknown
libcrypto sshd.
openssl: generating isakmpd RSA keys... done.
openssl: generating iked ECDSA keys... done.
ssh-keygen: generating new host keys: RSA ECDSA ED25519
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: /dev/sd0b: Device not configured
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd(failed) sndiod.
Cloud-init v. 21.4 running 'init-local' at Wed, 10 Apr 2024 16:51:36 +0000. Up ?? seconds.
2024-04-10 16:51:37,258 - util.py[WARNING]: Failed to mount /dev/sd1i when looking for data
Cloud-init v. 21.4 running 'init' at Wed, 10 Apr 2024 16:51:40 +0000. Up ?? seconds.
ci-info: +++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++
ci-info: +--------+-------+----------------+------------+-------+------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+-------+----------------+------------+-------+------------+
ci-info: | enc0 | False | . | . | . | . |
ci-info: | lo0 | True | 127.0.0.1 | 0xff000000 | . | . |
ci-info: | lo0 | True | ::1/128 | . | . | . |
ci-info: | lo0 | True | fe80::1%lo0/64 | . | 0x3 | . |
ci-info: | pflog0 | True | . | . | . | . |
ci-info: | vio0 | True | 10.0.2.15 | 0xffffff00 | . | . |
ci-info: +--------+-------+----------------+------------+-------+------------+
ci-info:
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:pK1UGu80UU4DAxnkbx+DNEQr6hc3yeZsE5GOW9VOrik root@openbsd-ci
The key's randomart image is:
+---[RSA 3072]----+
| .+==.+ |
| ... B o |
| + X o o |
| . / B + |
| . * S o o |
| . . & = = |
| . + E + |
| . . o |
| |
+----[SHA256]-----+
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub
The key fingerprint is:
SHA256:xMTTccfxV0AR+qviQUFLDMawAW0ledT+kKZNd35pb14 root@openbsd-ci
The key's randomart image is:
+---[DSA 1024]----+
| .o+B*=+..oB=.|
| +B=o+o o...|
| ...ooo.. o|
| . *.... .|
| S=.+ o. .|
| ... . .+.|
| . o.E|
| .. . +|
| .... o.|
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:9afMqJs0njgyW5zPglImmSqRMmCeOBn1+FeLQVuTOJE root@openbsd-ci
The key's randomart image is:
+---[ECDSA 256]---+
| .+ . |
| . E + |
| . o . + .. |
|o.. . o .. . |
|=+.+ +S. . . |
|Oo+ +.o.. + o |
|.= + o+ o . + |
|o . +.o* = |
|. ..+.oO. |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:5w3voyvPrMmhx/nA0RYp6SuCAHANc+KfIIPtiiyORwg root@openbsd-ci
The key's randomart image is:
+--[ED25519 256]--+
|. =o. |
|o+ +. . . |
|= + o o |
|E+ o . . o . |
|o.. o S = |
|+o.. . * + |
|+o. . ..=.. o |
|+ . . +=* .. |
|.o ..+=Bo.. |
+----[SHA256]-----+
Cloud-init v. 21.4 running 'modules:config' at Wed, 10 Apr 2024 16:51:45 +0000. Up ?? seconds.
2024-04-10 16:51:47,544 - util.py[WARNING]: Running module set-passwords (<module 'cloudinit.config.cc_set_passwords' from '/usr/local/lib/python3.10/site-packages/cloud_init-21.4-py3.10.egg/cloudinit/config/cc_set_passwords.py'>) failed
Cloud-init v. 21.4 running 'modules:final' at Wed, 10 Apr 2024 16:51:49 +0000. Up ?? seconds.
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
cloud-init: #############################################################
cloud-init: -----BEGIN SSH HOST KEY FINGERPRINTS-----
cloud-init: 1024 SHA256:xMTTccfxV0AR+qviQUFLDMawAW0ledT+kKZNd35pb14 root@openbsd-ci (DSA)
cloud-init: 256 SHA256:9afMqJs0njgyW5zPglImmSqRMmCeOBn1+FeLQVuTOJE root@openbsd-ci (ECDSA)
cloud-init: 256 SHA256:5w3voyvPrMmhx/nA0RYp6SuCAHANc+KfIIPtiiyORwg root@openbsd-ci (ED25519)
cloud-init: 3072 SHA256:pK1UGu80UU4DAxnkbx+DNEQr6hc3yeZsE5GOW9VOrik root@openbsd-ci (RSA)
cloud-init: -----END SSH HOST KEY FINGERPRINTS-----
cloud-init: #############################################################
-----BEGIN SSH HOST KEY KEYS-----
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBJqRUjVWdedMWgMkcckufVo5hXL5nQSqXN9jCm4J2m0QRreXHUgRcxYoH7cenO+qUHwH0BJDB2ikUQmBxzWOD0s= root@openbsd-ci
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIIhw4vQvSCRPNKesidyW2ntDR5pCzcxmAJQ2qle4FaLX root@openbsd-ci
ssh-rsa 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 root@openbsd-ci
-----END SSH HOST KEY KEYS-----
2024-04-10 16:51:50,916 - util.py[WARNING]: Unable to read uptime using method: ctypes
Cloud-init v. 21.4 finished at Wed, 10 Apr 2024 16:51:50 +0000. Datasource DataSourceNoCloud [seed=/dev/sd1a][dsmode=net]. Up ?? seconds
starting local daemons: cron.
Wed Apr 10 18:51:51 CEST 2024
OpenBSD/amd64 (openbsd-ci) (tty00)
login:
Task log
+ sudo pkg_add -u
quirks-6.122 signed on 2023-10-13T21:05:16Z
quirks-6.121->6.122: ok
py3-MarkupSafe-2.1.2:python-3.10.10p0->3.10.13: ok
py3-requests-2.28.2->2.31.0: ok
Read shared items: ok
+ sudo pkg_add git
quirks-6.122 signed on 2023-10-13T21:05:16Z
git-2.40.0:cvsps-2.1p2: ok
git-2.40.0:p5-Time-TimeDate-2.33: ok
git-2.40.0:p5-Mail-Tools-2.21p0: ok
git-2.40.0:nghttp2-1.52.0p0: ok
git-2.40.0:nghttp3-0.9.0: ok
git-2.40.0:ngtcp2-0.13.1: ok
git-2.40.0:curl-8.4.0: ok
git-2.40.0:p5-Error-0.17029: ok
git-2.40.0: ok
The following new rcscripts were installed: /etc/rc.d/gitdaemon
See rcctl(8) for details.
New and changed readme(s):
/usr/local/share/doc/pkg-readmes/git
+ git clone --recursive https://git.janouch.name/p/hex.git hex
Cloning into 'hex'...
remote: Enumerating objects: 397, done.
remote: Counting objects: 100% (84/84), done.
remote: Compressing objects: 100% (84/84), done.
remote: Total 397 (delta 46), reused 0 (delta 0), pack-reused 313 (from 1)
Receiving objects: 100% (397/397), 204.56 KiB | 4.45 MiB/s, done.
Resolving deltas: 100% (236/236), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Submodule 'termo' (https://git.janouch.name/p/termo.git) registered for path 'termo'
Cloning into '/home/ci/hex/liberty'...
remote: Enumerating objects: 744, done.
remote: Counting objects: 100% (213/213), done.
remote: Compressing objects: 100% (210/210), done.
remote: Total 744 (delta 124), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (744/744), 381.53 KiB | 4.38 MiB/s, done.
Resolving deltas: 100% (445/445), done.
Cloning into '/home/ci/hex/termo'...
remote: Enumerating objects: 1977, done.
remote: Counting objects: 100% (38/38), done.
remote: Compressing objects: 100% (37/37), done.
Receiving objects: 100% (1977/1977), 1.38 MiB | 5.56 MiB/s, done.
remote: Total 1977 (delta 14), reused 0 (delta 0), pack-reused 1939 (from 1)
Resolving deltas: 100% (1259/1259), done.
Submodule path 'liberty': checked out '2a1f17a8f7e32e1a485df450c5ad231312fedc16'
Submodule path 'termo': checked out '8265f075b176b33680012094aa1ced5721e55ac9'
+ cd hex
+ git -c advice.detachedHead=false checkout 3071db8e19241229ffa384058f07b34919664615
HEAD is now at 3071db8 Be actually able to use a system Termo library
+ sudo pkg_add cmake librsvg libunistring lua%5.4
quirks-6.122 signed on 2023-10-13T21:05:16Z
cmake-3.25.2p0v0:jsoncpp-1.9.5: ok
cmake-3.25.2p0v0:libuv-1.44.2: ok
cmake-3.25.2p0v0:rhash-1.4.3: ok
cmake-3.25.2p0v0:lz4-1.9.4: ok
cmake-3.25.2p0v0:zstd-1.5.5: ok
cmake-3.25.2p0v0:libb2-0.98.1v0: ok
cmake-3.25.2p0v0:libarchive-3.7.2: ok
cmake-3.25.2p0v0: ok
librsvg-2.54.5p2:libxml-2.10.4: ok
librsvg-2.54.5p2:fribidi-1.0.12: ok
librsvg-2.54.5p2:pcre2-10.37p1: ok
librsvg-2.54.5p2:glib2-2.74.6: ok
librsvg-2.54.5p2:graphite2-1.3.14: ok
librsvg-2.54.5p2:lzo2-2.10p2: ok
librsvg-2.54.5p2:png-1.6.39: ok
librsvg-2.54.5p2:cairo-1.17.8: ok
librsvg-2.54.5p2:harfbuzz-7.1.0: ok
librsvg-2.54.5p2:pango-1.50.14: ok
librsvg-2.54.5p2:shared-mime-info-2.2: ok
librsvg-2.54.5p2:jpeg-2.1.4v0: ok
librsvg-2.54.5p2:tiff-4.5.0p0: ok
librsvg-2.54.5p2:gdk-pixbuf-2.42.10: ok
librsvg-2.54.5p2: ok
libunistring-0.9.7: ok
lua-5.4.4: ok
Running tags: ok
New and changed readme(s):
/usr/local/share/doc/pkg-readmes/glib2
+ cmake -B build
-- The C compiler identification is Clang 13.0.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.2")
-- Found Ncursesw: /usr/lib/libncursesw.so.14.0
-- Found Unistring: /usr/local/include
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed
-- Check if compiler accepts -pthread
-- Check if compiler accepts -pthread - yes
-- Found Threads: TRUE
-- Found Curses: /usr/lib/libcurses.so.14.0
-- Checking for modules 'glib-2.0;gio-2.0'
-- Found glib-2.0, version 2.74.6
-- Found gio-2.0, version 2.74.6
-- Checking for module 'unibilium>=0.1.0'
--
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Checking for modules 'x11;xrender;xft;fontconfig;libpng'
-- Found x11, version 1.8.1
-- Found xrender, version 0.9.11
-- Found xft, version 2.3.7
-- Found fontconfig, version 2.14.0
-- Found libpng, version 1.6.39
-- Looking for resizeterm
-- Looking for resizeterm - found
CMake Warning at CMakeLists.txt:128 (message):
Neither asciidoctor nor a2x were found, falling back to a substandard
manual page generator
-- Configuring done
-- Generating done
-- Build files have been written to: /home/ci/hex/build
+ cmake --build build -- package
[ 10%] Building C object termo/CMakeFiles/termo-static.dir/termo.c.o
[ 20%] Building C object termo/CMakeFiles/termo-static.dir/driver-csi.c.o
[ 30%] Building C object termo/CMakeFiles/termo-static.dir/driver-ti.c.o
[ 40%] Linking C static library libtermo-0.a
[ 40%] Built target termo-static
[ 50%] Building C object CMakeFiles/hex.dir/hex.c.o
[ 60%] Linking C executable hex
hex.c(CMakeFiles/hex.dir/hex.c.o:(xstrdup)): warning: strcpy() is almost always misused, please use strlcpy()
[ 60%] Built target hex
[ 70%] Generating hex 16x16 application icon
[ 80%] Generating hex 32x32 application icon
[ 90%] Generating hex 48x48 application icon
[ 90%] Built target icons
[100%] Generating man page for hex
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: hex
CPack: - Install project: hex []
CPack: Create package
CPack: - package: /home/ci/hex/build/hex-0.1.0-OpenBSD-amd64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: hex
CPack: - Install project: hex []
CPack: Create package
CPack: - package: /home/ci/hex/build/hex-0.1.0-OpenBSD-amd64.zip generated.