- Created
- 6d ago
- Changed
- 6d ago
- Project
- p/usb-drivers
- Commit
- fa4bfd80dfafe07c261135555e517cbdca497689
- Runner
- Alpine 3.24
- State
- Success
- Notified
- 1
- Duration
- 57s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/nocloud_alpine-3.23.3-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.7-0-virt (buildozer@build-3-23-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-01-26 18:22:53
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 10842340547 cycles
[ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000004] tsc: Detected 3096.006 MHz processor
[ 0.000511] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000538] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000540] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000574] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007158] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007269] RAMDISK: [mem 0x7f652000-0x7fffffff]
[ 0.007270] ACPI: Early table checksum verification disabled
[ 0.007272] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007275] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007279] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007283] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007286] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007288] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007290] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007292] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007294] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007295] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007296] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007296] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007297] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007297] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.007713] No NUMA configuration found
[ 0.007714] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.007716] NODE_DATA(0) allocated [mem 0x13fffbd40-0x13fffffff]
[ 0.007821] Zone ranges:
[ 0.007821] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007823] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007824] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007825] Movable zone start for each node
[ 0.007825] Early memory node ranges
[ 0.007825] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.007826] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.007827] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007828] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.007913] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007925] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013390] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.014037] ACPI: PM-Timer IO Port: 0x608
[ 0.014051] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.014085] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.014088] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014089] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.014090] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014090] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.014091] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.014095] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.014096] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014102] CPU topo: Max. logical packages: 1
[ 0.014103] CPU topo: Max. logical dies: 1
[ 0.014103] CPU topo: Max. dies per package: 1
[ 0.014106] CPU topo: Max. threads per core: 1
[ 0.014107] CPU topo: Num. cores per package: 4
[ 0.014107] CPU topo: Num. threads per package: 4
[ 0.014107] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.014122] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.014133] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.014134] Booting paravirtualized kernel on KVM
[ 0.014135] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.017651] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.017845] percpu: Embedded 55 pages/cpu s185240 r8192 d31848 u524288
[ 0.017868] kvm-guest: PV spinlocks disabled, no host support
[ 0.017869] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4 console=ttyS0,115200n8 console=ttyAMA0,115200n8 initrd=initramfs-virt
[ 0.017907] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.017910] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.018233] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.018401] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.018470] software IO TLB: area num 4.
[ 0.029190] Fallback order for Node 0: 0
[ 0.029194] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.029195] Policy zone: Normal
[ 0.029393] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.040769] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.040832] Kernel/User page tables isolation: enabled
[ 0.041539] Dynamic Preempt: none
[ 0.041686] rcu: Preemptible hierarchical RCU implementation.
[ 0.041687] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.041688] Trampoline variant of Tasks RCU enabled.
[ 0.041688] Tracing variant of Tasks RCU enabled.
[ 0.041689] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.041689] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.041695] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.041697] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.045697] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.045883] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.045968] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.052674] Console: colour VGA+ 80x25
[ 0.052727] printk: legacy console [ttyS0] enabled
[ 0.205967] ACPI: Core revision 20250807
[ 0.207050] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.209244] APIC: Switch to symmetric I/O mode setup
[ 0.210572] x2apic enabled
[ 0.211441] APIC: Switched APIC routing to: physical x2apic
[ 0.213723] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.215073] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.217540] Calibrating delay loop (skipped) preset value.. 6192.01 BogoMIPS (lpj=3096006)
[ 0.218653] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.219540] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.220542] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.222540] Speculative Store Bypass: Vulnerable
[ 0.223541] Spectre V2 : Mitigation: Retpolines
[ 0.224488] ITS: Mitigation: Aligned branch/return thunks
[ 0.224540] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.225540] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.226540] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.227541] active return thunk: its_return_thunk
[ 0.228541] x86/fpu: x87 FPU will use FXSAVE
[ 0.243567] Freeing SMP alternatives memory: 40K
[ 0.244543] pid_max: default: 32768 minimum: 301
[ 0.245819] LSM: initializing lsm=lockdown,capability,landlock
[ 0.246955] landlock: Up and running.
[ 0.247656] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.248542] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.352982] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.353736] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.354570] signal: max sigframe size: 1440
[ 0.355570] rcu: Hierarchical SRCU implementation.
[ 0.356540] rcu: Max phase no-delay instances is 400.
[ 0.358545] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.363046] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.363593] smp: Bringing up secondary CPUs ...
[ 0.365541] smpboot: x86: Booting SMP configuration:
[ 0.366540] .... node #0, CPUs: #1 #2 #3
[ 0.370621] smp: Brought up 1 node, 4 CPUs
[ 0.372542] smpboot: Total of 4 processors activated (24768.04 BogoMIPS)
[ 0.374592] Memory: 3999892K/4193760K available (14578K kernel code, 2022K rwdata, 9648K rodata, 2988K init, 1224K bss, 188732K reserved, 0K cma-reserved)
[ 0.375793] devtmpfs: initialized
[ 0.376582] x86/mm: Memory block size: 128MB
[ 0.378662] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.379547] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.380545] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.382674] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.383652] audit: initializing netlink subsys (disabled)
[ 0.384552] audit: type=2000 audit(1784513848.903:1): state=initialized audit_enabled=0 res=1
[ 0.384592] thermal_sys: Registered thermal governor 'step_wise'
[ 0.385551] cpuidle: using governor ladder
[ 0.387546] cpuidle: using governor menu
[ 0.388651] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.390726] PCI: Using configuration type 1 for base access
[ 0.391615] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.392575] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.393541] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.395733] ACPI: Added _OSI(Module Device)
[ 0.396540] ACPI: Added _OSI(Processor Device)
[ 0.397540] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.400099] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.402541] ACPI: Interpreter enabled
[ 0.403419] ACPI: PM: (supports S0 S3 S5)
[ 0.403541] ACPI: Using IOAPIC for interrupt routing
[ 0.405551] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.406540] PCI: Using E820 reservations for host bridge windows
[ 0.407629] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.411362] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.411544] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.412541] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.413547] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.415800] acpiphp: Slot [3] registered
[ 0.416566] acpiphp: Slot [4] registered
[ 0.417561] acpiphp: Slot [5] registered
[ 0.418577] acpiphp: Slot [6] registered
[ 0.419563] acpiphp: Slot [7] registered
[ 0.420547] acpiphp: Slot [8] registered
[ 0.421519] acpiphp: Slot [9] registered
[ 0.421563] acpiphp: Slot [10] registered
[ 0.422563] acpiphp: Slot [11] registered
[ 0.423562] acpiphp: Slot [12] registered
[ 0.424561] acpiphp: Slot [13] registered
[ 0.425580] acpiphp: Slot [14] registered
[ 0.426562] acpiphp: Slot [15] registered
[ 0.427562] acpiphp: Slot [16] registered
[ 0.428561] acpiphp: Slot [17] registered
[ 0.429564] acpiphp: Slot [18] registered
[ 0.430566] acpiphp: Slot [19] registered
[ 0.431562] acpiphp: Slot [20] registered
[ 0.432561] acpiphp: Slot [21] registered
[ 0.433561] acpiphp: Slot [22] registered
[ 0.434561] acpiphp: Slot [23] registered
[ 0.435564] acpiphp: Slot [24] registered
[ 0.436562] acpiphp: Slot [25] registered
[ 0.437564] acpiphp: Slot [26] registered
[ 0.438574] acpiphp: Slot [27] registered
[ 0.439562] acpiphp: Slot [28] registered
[ 0.440569] acpiphp: Slot [29] registered
[ 0.441563] acpiphp: Slot [30] registered
[ 0.442582] acpiphp: Slot [31] registered
[ 0.443559] PCI host bridge to bus 0000:00
[ 0.444544] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.445540] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.446541] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.447541] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.448540] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.449541] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.450628] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.452906] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.454771] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.456600] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.457602] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.458540] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.459541] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.460546] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.461850] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.463824] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.465540] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.466884] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.469573] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.470566] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.471590] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.472664] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.474081] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.476453] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.476555] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.477597] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.478554] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.482016] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.484366] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.484555] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.485594] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.488335] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.490334] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.490555] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.491613] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.495263] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.495685] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.496671] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.497666] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.498611] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.499978] iommu: Default domain type: Translated
[ 0.500540] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.501708] SCSI subsystem initialized
[ 0.502638] pps_core: LinuxPPS API ver. 1 registered
[ 0.503541] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.504544] PTP clock support registered
[ 0.506848] PCI: Using ACPI for IRQ routing
[ 0.507812] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.508564] clocksource: Switched to clocksource kvm-clock
[ 0.510314] VFS: Disk quotas dquot_6.6.0
[ 0.511295] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.512916] pnp: PnP ACPI init
[ 0.514161] pnp: PnP ACPI: found 6 devices
[ 0.522929] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.524931] NET: Registered PF_INET protocol family
[ 0.526120] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.535885] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.537821] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.539610] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.541462] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.543223] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.544876] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.546605] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.548174] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.549894] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.551217] NET: Registered PF_XDP protocol family
[ 0.552340] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.553747] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.555175] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.556748] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.558320] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.559965] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.561351] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.562776] PCI: CLS 0 bytes, default 64
[ 0.563648] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.563733] Unpacking initramfs...
[ 0.565022] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.567668] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.570149] Initialise system trusted keyrings
[ 0.571296] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.572844] Key type asymmetric registered
[ 0.573746] Asymmetric key parser 'x509' registered
[ 0.574830] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.576501] io scheduler mq-deadline registered
[ 0.577483] io scheduler kyber registered
[ 0.578418] io scheduler bfq registered
[ 0.582347] ERST DBG: ERST support is disabled.
[ 0.583930] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.586910] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.590246] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.592819] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.594467] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.597052] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.599108] scsi host0: ata_piix
[ 0.600020] scsi host1: ata_piix
[ 0.600802] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.602533] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.604268] hv_vmbus: registering driver hv_netvsc
[ 0.605406] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.608093] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.609342] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.610503] hv_vmbus: registering driver hyperv_keyboard
[ 0.611750] rtc_cmos 00:05: RTC can wake from S4
[ 0.613512] rtc_cmos 00:05: registered as rtc0
[ 0.614701] rtc_cmos 00:05: setting system clock to 2026-07-20T02:17:28 UTC (1784513848)
[ 0.616687] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.618313] intel_pstate: CPU model not supported
[ 0.619535] gre: GRE over IPv4 demultiplexer driver
[ 0.620833] NET: Registered PF_INET6 protocol family
[ 0.622415] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.622699] Segment Routing with IPv6
[ 0.625477] In-situ OAM (IOAM) with IPv6
[ 0.626446] Key type dns_resolver registered
[ 0.627446] IPI shorthand broadcast: enabled
[ 0.630796] sched_clock: Marking stable (464003822, 166648700)->(687976478, -57323956)
[ 0.632859] registered taskstats version 1
[ 0.634004] Loading compiled-in X.509 certificates
[ 0.637232] Freeing initrd memory: 9912K
[ 0.642633] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.647029] Demotion targets for Node 0: null
[ 0.648258] Key type .fscrypt registered
[ 0.649202] Key type fscrypt-provisioning registered
[ 0.757703] ata2: found unknown device (class 0)
[ 0.763140] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.772288] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.797106] Freeing unused kernel image (initmem) memory: 2988K
[ 0.800760] Write protecting the kernel read-only data: 26624k
[ 0.808284] Freeing unused kernel image (text/rodata gap) memory: 1804K
[ 0.812713] Freeing unused kernel image (rodata/data gap) memory: 592K
[ 0.815596] rodata_test: all tests were successful
[ 0.817648] Run /init as init process
[ 0.830910] Alpine Init 3.13.0-r0
Alpine Init 3.13.0-r0
[ 0.832549] Loading boot drivers...
* Loading boot drivers: [ 0.850941] ACPI: bus type USB registered
[ 0.851774] usbcore: registered new interface driver usbfs
[ 0.852646] usbcore: registered new interface driver hub
[ 0.853489] usbcore: registered new device driver usb
[ 0.857330] usbcore: registered new interface driver usb-storage
[ 0.903493] loop: module loaded
[ 0.931161] ACPI: bus type drm_connector registered
[ 0.948841] Loading boot drivers: ok.
ok.
[ 0.950812] Mounting root...
* Mounting root: [ 0.967502] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 0.969159] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 0.975219] [drm] Found bochs VGA, ID 0xb0c5.
[ 0.975882] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 0.977261] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 0.990719] Console: switching to colour frame buffer device 160x50
[ 0.992768] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.020591] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.021658] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.053137] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.056400] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.058769] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.062024] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.103356] block sr0: the capability attribute has been deprecated.
[ 1.934027] EXT4-fs (vda): mounted filesystem 325df078-35f9-4b5e-a95e-82778457688f ro with ordered data mode. Quota mode: none.
[ 1.942624] Mounting root: ok.
ok.
switch_root: can't open '/dev/ttyAMA0': No such file or directory
OpenRC 0.63 is starting up Linux 6.18.7-0-virt (x86_64)
* /proc is already mounted
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
[ 2.386693] random: crng init done
* Caching service dependencies ... [ ok ]
* Remounting devtmpfs on /dev ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting debug filesystem ... [ ok ]
* Mounting trace filesystem ... [ ok ]
* Mounting persistent storage (pstore) filesystem ... [ ok ]
* Mounting bpf filesystem ... [ ok ]
* Starting busybox mdev ... [ ok ]
* Scanning hardware for mdev ... [ ok ]
* Loading hardware drivers ... [ ok ]
* Loading modules ... [ ok ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Checking local filesystems .../: clean, 5520/51200 files, 171729/204800 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Remounting filesystems ... [ ok ]
* Activating swap devices ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Starting busybox acpid ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Creating user login records ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* cloud-init local ...Cloud-init v. 25.3 running 'init-local' at Mon, 20 Jul 2026 02:17:30 +0000. Up 3.27 seconds.
[ ok ]
* Setting hostname to localhost from /etc/hostname ... [ ok ]
* Starting busybox syslog ... [ ok ]
* Starting networking ... * lo ... [ ok ]
* eth0 ...dhcpcd-10.3.0 starting
DUID 00:01:00:01:31:f0:41:bb:52:54:00:12:34:56
eth0: IAID 00:12:34:56
eth0: soliciting an IPv6 router
eth0: Router Advertisement from fe80::2
eth0: adding address fec0::88e4:4a9c:ef03:8a29/64
eth0: adding route to fec0::/64
eth0: adding default route via fe80::2
eth0: soliciting a DHCP lease
eth0: offered 10.0.2.15 from 10.0.2.2
eth0: probing address 10.0.2.15/24
eth0: leased 10.0.2.15 for 86400 seconds
eth0: adding route to 10.0.2.0/24
eth0: adding default route via 10.0.2.2
[ ok ]
* Starting chronyd ... [ ok ]
* Starting cloud-init-hotplugd ... [ ok ]
* cloud-init init ...Cloud-init v. 25.3 running 'init' at Mon, 20 Jul 2026 02:17:45 +0000. Up 18.48 seconds.
ci-info: +++++++++++++++++++++++++++++++++++++++Net device info+++++++++++++++++++++++++++++++++++++++
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: | eth0 | True | 10.0.2.15 | 255.255.255.0 | global | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fec0::88e4:4a9c:ef03:8a29/64 | . | site | 52:54:00:12:34:56 |
ci-info: | eth0 | True | fe80::5054:ff:fe12:3456/64 | . | link | 52:54:00:12:34:56 |
ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
ci-info: | lo | True | ::1/128 | . | host | . |
ci-info: +--------+------+------------------------------+---------------+--------+-------------------+
ci-info: +++++++++++++++++++++++++++Route IPv4 info++++++++++++++++++++++++++++
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | Route | Destination | Gateway | Genmask | Interface | Flags |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: | 0 | 0.0.0.0 | 10.0.2.2 | 0.0.0.0 | eth0 | UG |
ci-info: | 1 | 10.0.2.0 | 0.0.0.0 | 255.255.255.0 | eth0 | U |
ci-info: +-------+-------------+----------+---------------+-----------+-------+
ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | Route | Destination | Gateway | Interface | Flags |
ci-info: +-------+-------------+---------+-----------+-------+
ci-info: | 0 | fe80::/64 | :: | eth0 | U |
ci-info: | 1 | fec0::/64 | :: | eth0 | Ue |
ci-info: | 2 | ::/0 | fe80::2 | eth0 | UGe |
ci-info: | 4 | local | :: | eth0 | U |
ci-info: | 5 | local | :: | eth0 | U |
ci-info: | 6 | multicast | :: | eth0 | U |
ci-info: +-------+-------------+---------+-----------+-------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub
The key fingerprint is:
SHA256:c+ez2bHaGKpMI3KWmqwM3JOVlfWwvcr20SOQ6HwJ0tQ root@alpine-ci
The key's randomart image is:
+---[RSA 3072]----+
| o |
| + = |
| + E o |
| = . . . |
| + +So... |
|. . o +.oo+o. |
|.. +. =oo* o+o. |
| o ..* +o...oO.o |
| o.+ o...=.+ |
+----[SHA256]-----+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub
The key fingerprint is:
SHA256:4VI6McUgoZLFK3SfL2o4DtO+VGlWoBX2OyrPjttyat8 root@alpine-ci
The key's randomart image is:
+---[ECDSA 256]---+
| .. Bo.o. |
| +.* + .. |
|+ +.. * o |
|... = B . |
| . = B S |
| . + o = |
|o = o . |
|.*oO.. |
|.oOO* E |
+----[SHA256]-----+
Generating public/private ed25519 key pair.
Your identification has been saved in /etc/ssh/ssh_host_ed25519_key
Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub
The key fingerprint is:
SHA256:rkLiVvEucQBexRjWx4Bfv2UTZvRvtWv0/ye58Edyjjs root@alpine-ci
The key's randomart image is:
+--[ED25519 256]--+
| oBoo .. |
| ..+ o + +. |
| . o . o . o .. .|
| . o . . + .o|
| + S + . oo|
| . + o. . o.=|
| . + + . . X.|
| o o .. oE =|
| . o. +*=|
+----[SHA256]-----+
[ ok ]
* cloud-init config ...Cloud-init v. 25.3 running 'modules:config' at Mon, 20 Jul 2026 02:17:46 +0000. Up 19.33 seconds.
[ ok ]
* cloud-init final ...Cloud-init v. 25.3 running 'modules:final' at Mon, 20 Jul 2026 02:17:47 +0000. Up 19.78 seconds.
(1/1) Installing ca-certificates (20260611-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20260611-r0.trigger
OK: 136.1 MiB in 208 packages
ci-info: +++++++++++++++++++++++++++++++++++Authorized keys from /home/ci/.ssh/authorized_keys for user ci++++++++++++++++++++++++++++++++++++
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | Keytype | Fingerprint (sha256) | Options | Comment |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
ci-info: | ssh-ed25519 | c7:b3:2d:85:ab:32:b5:84:6b:5d:ed:7c:29:6a:82:6f:65:6a:12:c4:b6:f5:b2:b9:54:71:f0:f4:71:76:6b:b2 | - | acid |
ci-info: +-------------+-------------------------------------------------------------------------------------------------+---------+---------+
2026-07-20 02:17:48,716 - cc_keys_to_console.py[WARNING]: Unable to activate module keys_to_console, helper tool not found at /usr/lib/cloud-init/write-ssh-key-fingerprints
Cloud-init v. 25.3 finished at Mon, 20 Jul 2026 02:17:48 +0000. Datasource DataSourceNoCloud [seed=/dev/vdb]. Up 21.36 seconds
[ ok ]
Welcome to Alpine Linux 3.23
Kernel 6.18.7-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
....status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.3-r1 -> 3.0.6-r0)
(2/2) Upgrading apk-tools (3.0.3-r1 -> 3.0.6-r0)
Executing busybox-1.37.0-r30.trigger
Continuing with the main upgrade transaction:
( 1/36) Upgrading alpine-baselayout-data (3.7.1-r8 -> 3.7.2-r0)
Installing file to etc/fstab.apk-new
Installing file to etc/group.apk-new
Installing file to etc/hostname.apk-new
Installing file to etc/inittab.apk-new
Installing file to etc/passwd.apk-new
Installing file to etc/profile.apk-new
Installing file to etc/shadow.apk-new
( 2/36) Upgrading musl (1.2.5-r21 -> 1.2.5-r23)
( 3/36) Upgrading alpine-baselayout (3.7.1-r8 -> 3.7.2-r0)
Executing alpine-baselayout-3.7.2-r0.pre-upgrade
Installing file to etc/motd.apk-new
Executing alpine-baselayout-3.7.2-r0.post-upgrade
( 4/36) Upgrading libcap2 (2.77-r0 -> 2.78-r0)
( 5/36) Upgrading alpine-release (3.23.3-r0 -> 3.23.5-r0)
( 6/36) Upgrading libcrypto3 (3.5.5-r0 -> 3.5.7-r0)
( 7/36) Upgrading libssl3 (3.5.5-r0 -> 3.5.7-r0)
( 8/36) Upgrading zlib (1.3.1-r2 -> 1.3.2-r0)
( 9/36) Upgrading ca-certificates-bundle (20251003-r0 -> 20260611-r0)
Installing file to etc/ssl/certs/ca-certificates.crt.apk-new
(10/36) Upgrading musl-utils (1.2.5-r21 -> 1.2.5-r23)
(11/36) Upgrading alpine-base (3.23.3-r0 -> 3.23.5-r0)
(12/36) Upgrading p11-kit (0.25.5-r2 -> 0.26.2-r0)
(13/36) Upgrading gnutls (3.8.11-r0 -> 3.8.13-r0)
(14/36) Upgrading chrony (4.8-r1 -> 4.8-r2)
Executing chrony-4.8-r2.pre-upgrade
(15/36) Upgrading chrony-openrc (4.8-r1 -> 4.8-r2)
(16/36) Upgrading libblkid (2.41.2-r0 -> 2.41.4-r0)
(17/36) Upgrading blkid (2.41.2-r0 -> 2.41.4-r0)
(18/36) Upgrading libsmartcols (2.41.2-r0 -> 2.41.4-r0)
(19/36) Upgrading partx (2.41.2-r0 -> 2.41.4-r0)
(20/36) Upgrading libuuid (2.41.2-r0 -> 2.41.4-r0)
(21/36) Upgrading libfdisk (2.41.2-r0 -> 2.41.4-r0)
(22/36) Upgrading sfdisk (2.41.2-r0 -> 2.41.4-r0)
(23/36) Upgrading libexpat (2.7.3-r0 -> 2.8.2-r0)
(24/36) Upgrading xz-libs (5.8.2-r0 -> 5.8.3-r0)
(25/36) Upgrading python3 (3.12.12-r0 -> 3.12.13-r0)
(26/36) Upgrading python3-pycache-pyc0 (3.12.12-r0 -> 3.12.13-r0)
(27/36) Upgrading pyc (3.12.12-r0 -> 3.12.13-r0)
(28/36) Upgrading python3-pyc (3.12.12-r0 -> 3.12.13-r0)
(29/36) Upgrading py3-requests (2.32.5-r0 -> 2.33.1-r0)
(30/36) Upgrading py3-requests-pyc (2.32.5-r0 -> 2.33.1-r0)
(31/36) Upgrading tzdata (2025c-r0 -> 2026c-r0)
(32/36) Upgrading linux-virt (6.18.7-r0 -> 6.18.38-r0)
(33/36) Upgrading libmount (2.41.2-r0 -> 2.41.4-r0)
(34/36) Upgrading mount (2.41.2-r0 -> 2.41.4-r0)
(35/36) Upgrading libnvmemi (1.16.1-r0 -> 1.16.2-r0)
(36/36) Upgrading libnvme (1.16.1-r0 -> 1.16.2-r0)
Executing busybox-1.37.0-r30.trigger
Executing ca-certificates-20260611-r0.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.13.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.38-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 136.8 MiB in 208 packages
+ doas apk add --no-interactive git gnu-libiconv
(1/9) Installing c-ares (1.34.8-r0)
(2/9) Installing nghttp2-libs (1.69.0-r0)
(3/9) Installing libpsl (0.21.5-r3)
(4/9) Installing libcurl (8.20.0-r0)
(5/9) Installing pcre2 (10.47-r0)
(6/9) Installing git (2.52.0-r0)
(7/9) Installing git-init-template (2.52.0-r0)
(8/9) Installing gnu-libiconv-libs (1.18-r0)
(9/9) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r30.trigger
OK: 146.3 MiB in 217 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/usb-drivers.git usb-drivers
Cloning into 'usb-drivers'...
remote: Enumerating objects: 184, done.
remote: Counting objects: 100% (184/184), done.
remote: Compressing objects: 100% (87/87), done.
remote: Total 184 (delta 112), reused 160 (delta 96), pack-reused 0 (from 0)
Receiving objects: 100% (184/184), 132.59 KiB | 16.57 MiB/s, done.
Resolving deltas: 100% (112/112), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty) registered for path 'liberty'
Cloning into '/home/ci/usb-drivers/liberty'...
remote: Enumerating objects: 921, done.
remote: Counting objects: 100% (390/390), done.
remote: Compressing objects: 100% (387/387), done.
remote: Total 921 (delta 249), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (921/921), 447.77 KiB | 13.99 MiB/s, done.
Resolving deltas: 100% (570/570), done.
Submodule path 'liberty': checked out '9268fb8eba4a60499809965b3b69c2eb7e3798e7'
+ cd usb-drivers
+ git -c 'advice.detachedHead=false' checkout fa4bfd80dfafe07c261135555e517cbdca497689
HEAD is now at fa4bfd8 Update README.adoc
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=1.2.0-10-gfa4bfd8
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/1.2.0-10-gfa4bfd8/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake libusb-dev hidapi-dev
( 1/29) Installing jansson (2.14.1-r0)
( 2/29) Installing binutils (2.45.1-r0)
( 3/29) Installing libmagic (5.46-r2)
( 4/29) Installing file (5.46-r2)
( 5/29) Installing libgomp (15.2.0-r2)
( 6/29) Installing libatomic (15.2.0-r2)
( 7/29) Installing isl26 (0.26-r1)
( 8/29) Installing mpfr4 (4.2.2-r0)
( 9/29) Installing mpc1 (1.3.1-r1)
(10/29) Installing gcc (15.2.0-r2)
(11/29) Installing libstdc++-dev (15.2.0-r2)
(12/29) Installing musl-dev (1.2.5-r23)
(13/29) Installing g++ (15.2.0-r2)
(14/29) Installing make (4.4.1-r3)
(15/29) Installing fortify-headers (1.1-r5)
(16/29) Installing patch (2.8-r0)
(17/29) Installing build-base (0.5-r3)
(18/29) Installing acl-libs (2.3.2-r1)
(19/29) Installing lz4-libs (1.10.0-r0)
(20/29) Installing libarchive (3.8.5-r0)
(21/29) Installing rhash-libs (1.4.6-r0)
(22/29) Installing libuv (1.52.1-r0)
(23/29) Installing cmake (4.1.3-r0)
(24/29) Installing eudev-libs (3.2.14-r6)
(25/29) Installing libusb (1.0.29-r0)
(26/29) Installing hidapi (0.15.0-r0)
(27/29) Installing pkgconf (2.5.1-r0)
(28/29) Installing hidapi-dev (0.15.0-r0)
(29/29) Installing libusb-dev (1.0.29-r0)
Executing busybox-1.37.0-r30.trigger
OK: 466.5 MiB in 246 packages
+ doas apk add --no-interactive mingw-w64-gcc rsvg-convert icoutils cmake make pkgconf curl libarchive-tools coreutils ncurses
( 1/55) Installing coreutils-env (9.8-r1)
( 2/55) Installing coreutils-fmt (9.8-r1)
( 3/55) Installing coreutils-sha512sum (9.8-r1)
( 4/55) Installing libattr (2.5.2-r2)
( 5/55) Installing coreutils (9.8-r1)
( 6/55) Installing curl (8.20.0-r0)
( 7/55) Installing perl (5.42.2-r0)
( 8/55) Installing perl-error (0.17030-r0)
( 9/55) Installing perl-git (2.52.0-r0)
(10/55) Installing git-perl (2.52.0-r0)
(11/55) Installing perl-http-date (6.06-r0)
(12/55) Installing perl-clone (0.47-r1)
(13/55) Installing perl-uri (5.28-r0)
(14/55) Installing perl-io-html (1.004-r1)
(15/55) Installing perl-encode-locale (1.05-r5)
(16/55) Installing perl-lwp-mediatypes (6.04-r3)
(17/55) Installing perl-http-message (7.01-r0)
(18/55) Installing perl-http-cookies (6.11-r0)
(19/55) Installing perl-net-http (6.24-r0)
(20/55) Installing perl-html-tagset (3.24-r0)
(21/55) Installing perl-html-parser (3.83-r1)
(22/55) Installing perl-file-listing (6.16-r0)
(23/55) Installing perl-www-robotrules (6.02-r5)
(24/55) Installing perl-http-negotiate (6.01-r5)
(25/55) Installing perl-try-tiny (0.32-r0)
(26/55) Installing perl-libwww (6.81-r0)
(27/55) Installing libpng (1.6.58-r1)
(28/55) Installing icoutils (0.32.3-r4)
(29/55) Installing libarchive-tools (3.8.5-r0)
(30/55) Installing mingw-w64-binutils (2.45-r0)
(31/55) Installing mingw-w64-crt (13.0.0-r2)
(32/55) Installing mingw-w64-headers (13.0.0-r0)
(33/55) Installing mingw-w64-winpthreads (13.0.0-r2)
(34/55) Installing mingw-w64-gcc (15.2.0-r0)
(35/55) Installing ncurses (6.5_p20251123-r0)
(36/55) Installing libxau (1.0.12-r0)
(37/55) Installing libxdmcp (1.1.5-r1)
(38/55) Installing libxcb (1.17.0-r1)
(39/55) Installing libx11 (1.8.12-r1)
(40/55) Installing libxext (1.3.6-r2)
(41/55) Installing libxrender (0.9.12-r0)
(42/55) Installing freetype (2.14.3-r0)
(43/55) Installing fontconfig (2.17.1-r0)
(44/55) Installing pixman (0.46.4-r0)
(45/55) Installing cairo (1.18.4-r0)
(46/55) Installing libdav1d (1.5.2-r0)
(47/55) Installing libintl (0.24.1-r1)
(48/55) Installing glib (2.86.3-r0)
(49/55) Installing graphite2 (1.3.14-r6)
(50/55) Installing harfbuzz (12.2.0-r0)
(51/55) Installing libxft (2.3.9-r0)
(52/55) Installing fribidi (1.0.16-r2)
(53/55) Installing pango (1.56.4-r0)
(54/55) Installing libxml2 (2.13.9-r1)
(55/55) Installing rsvg-convert (2.61.2-r0)
Executing busybox-1.37.0-r30.trigger
Executing glib-2.86.3-r0.trigger
OK: 1032.7 MiB in 301 packages
+ cmake -B build
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for module 'libusb-1.0'
-- Found libusb-1.0, version 1.0.29
-- Configuring done (0.2s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/usb-drivers/build
+ cmake --build build -- package
[ 5%] Building C object CMakeFiles/elksmart-comm.dir/elksmart-comm.c.o
In file included from /home/ci/usb-drivers/elksmart-comm.c:22:
/home/ci/usb-drivers/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 11%] Linking C executable elksmart-comm
[ 11%] Built target elksmart-comm
[ 16%] Building C object CMakeFiles/razer-bw-te-ctl.dir/razer-bw-te-ctl.c.o
[ 22%] Linking C executable razer-bw-te-ctl
[ 22%] Built target razer-bw-te-ctl
[ 27%] Building C object CMakeFiles/eizoctl.dir/eizoctl.c.o
[ 33%] Linking C executable eizoctl
[ 33%] Built target eizoctl
[ 38%] Building C object CMakeFiles/upscat.dir/upscat.c.o
[ 44%] Linking C executable upscat
[ 44%] Built target upscat
[ 50%] Building C object CMakeFiles/test-upscat.dir/upscat.c.o
[ 55%] Linking C executable test-upscat
[ 55%] Built target test-upscat
[ 61%] Generating AsciiDoc man page for elksmart-comm
[ 66%] Generating roff man page for elksmart-comm
[ 72%] Generating AsciiDoc man page for razer-bw-te-ctl
[ 77%] Generating roff man page for razer-bw-te-ctl
[ 83%] Generating AsciiDoc man page for eizoctl
[ 88%] Generating roff man page for eizoctl
[ 94%] Generating AsciiDoc man page for upscat
[100%] Generating roff man page for upscat
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build/usb-drivers-1.2.0-10-gfa4bfd8-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build/usb-drivers-1.2.0-10-gfa4bfd8-Linux-x86_64.zip generated.
+ sh -e ./Win64Depends.sh
-- Fetching repository DB
######################################################################### 100.0%
-- Resolving mingw-w64-x86_64-hidapi mingw-w64-x86_64-libusb
-- Fetching mingw-w64-x86_64-hidapi-0.15.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-gcc-libs-16.1.0-5-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libwinpthread-14.0.0.r190.g96fb1bff7-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-tzdata-2026c-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libusb-1.0.30-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Verifying checksums
-- Extracting packages
-- Success
+ toolchain=/home/ci/usb-drivers/liberty/cmake/toolchains/MinGW-w64-x64.cmake
+ cmake -B build-Win64 '-DCMAKE_TOOLCHAIN_FILE=/home/ci/usb-drivers/liberty/cmake/toolchains/MinGW-w64-x64.cmake'
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/x86_64-w64-mingw32-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for module 'libusb-1.0'
-- Found libusb-1.0, version 1.0.30
-- Checking for one of the modules 'hidapi;hidapi-hidraw;hidapi-libusb'
-- Configuring done (0.3s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/usb-drivers/build-Win64
+ cmake --build build-Win64 -- package
[ 6%] Building C object CMakeFiles/razer-bw-te-ctl.dir/razer-bw-te-ctl.c.obj
[ 12%] Linking C executable razer-bw-te-ctl.exe
[ 12%] Built target razer-bw-te-ctl
[ 18%] Building C object CMakeFiles/eizoctl.dir/eizoctl.c.obj
[ 25%] Linking C executable eizoctl.exe
[ 25%] Built target eizoctl
[ 31%] Building C object CMakeFiles/upscat.dir/upscat.c.obj
[ 37%] Linking C executable upscat.exe
[ 37%] Built target upscat
[ 43%] Building C object CMakeFiles/test-upscat.dir/upscat.c.obj
[ 50%] Linking C executable test-upscat.exe
[ 50%] Built target test-upscat
[ 56%] Generating eizoctltray 48x48 application icon
[ 62%] Generating eizoctltray 256x256 application icon
[ 68%] Generating eizoctltray 16x16 application icon
[ 75%] Generating eizoctltray 32x32 application icon
[ 81%] Generating Windows program icon
[ 87%] Building C object CMakeFiles/eizoctltray.dir/eizoctl.c.obj
[ 93%] Building RC object CMakeFiles/eizoctltray.dir/eizoctltray.rc.res
[100%] Linking C executable eizoctltray.exe
[100%] Built target eizoctltray
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build-Win64/usb-drivers-1.2.0-10-gfa4bfd8-Windows-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build-Win64/usb-drivers-1.2.0-10-gfa4bfd8-Windows-x86_64.zip generated.
+ mv build-Win64/usb-drivers-1.2.0-10-gfa4bfd8-Windows-x86_64.zip /home/ci/acid-deploy
Deploy log
+ mv -- usb-drivers-1.2.0-10-gfa4bfd8-Windows-x86_64.zip /home/acid/cd