- Created
- 26d ago
- Changed
- 26d ago
- Project
- p/xK
- Commit
- bcfbd400035c8a7bb31eafc8146cddbaa645d82b
- Runner
- Alpine 3.24
- State
- Success
- Notified
- 1
- Duration
- 7m26s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.35-0-virt (buildozer@build-3-24-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-06-09 12:34:47
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000018] kvm-clock: using sched offset of 10877570784 cycles
[ 0.000020] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000022] tsc: Detected 3096.006 MHz processor
[ 0.000493] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000519] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000521] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000555] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007304] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007531] RAMDISK: [mem 0x7f5a7000-0x7fffffff]
[ 0.007532] ACPI: Early table checksum verification disabled
[ 0.007535] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007538] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007542] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007546] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007549] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007551] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007553] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007555] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007557] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007558] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007559] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007559] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007560] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007560] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.007968] No NUMA configuration found
[ 0.007969] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.007971] NODE_DATA(0) allocated [mem 0x13fff8d40-0x13fffcfff]
[ 0.007992] Zone ranges:
[ 0.007992] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007993] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007994] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007995] Movable zone start for each node
[ 0.007995] Early memory node ranges
[ 0.007996] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.007997] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.007998] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007998] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.008088] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.008099] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013891] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.014621] ACPI: PM-Timer IO Port: 0x608
[ 0.014636] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.014671] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.014674] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014675] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.014676] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014677] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.014678] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.014681] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.014682] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014690] CPU topo: Max. logical packages: 1
[ 0.014691] CPU topo: Max. logical dies: 1
[ 0.014691] CPU topo: Max. dies per package: 1
[ 0.014694] CPU topo: Max. threads per core: 1
[ 0.014695] CPU topo: Num. cores per package: 4
[ 0.014695] CPU topo: Num. threads per package: 4
[ 0.014696] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.014711] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.014723] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.014724] Booting paravirtualized kernel on KVM
[ 0.014733] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.018552] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.018784] percpu: Embedded 55 pages/cpu s185752 r8192 d31336 u524288
[ 0.018808] kvm-guest: PV spinlocks disabled, no host support
[ 0.018809] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.018851] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4,ena,gve,mana", will be passed to user space.
[ 0.018855] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.019180] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.019347] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.019417] software IO TLB: area num 4.
[ 0.031604] Fallback order for Node 0: 0
[ 0.031611] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.031613] Policy zone: Normal
[ 0.031913] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.044504] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.044569] Kernel/User page tables isolation: enabled
[ 0.045324] Dynamic Preempt: none
[ 0.045476] rcu: Preemptible hierarchical RCU implementation.
[ 0.045476] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.045478] Trampoline variant of Tasks RCU enabled.
[ 0.045478] Tracing variant of Tasks RCU enabled.
[ 0.045479] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.045479] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.045485] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.045487] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.049624] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.049828] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.050138] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.057032] Console: colour VGA+ 80x25
[ 0.057035] printk: legacy console [tty0] enabled
[ 0.095347] printk: legacy console [ttyS0] enabled
[ 0.255383] ACPI: Core revision 20250807
[ 0.256770] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.259405] APIC: Switch to symmetric I/O mode setup
[ 0.261050] x2apic enabled
[ 0.262247] APIC: Switched APIC routing to: physical x2apic
[ 0.264906] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.266567] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.269519] Calibrating delay loop (skipped) preset value.. 6192.01 BogoMIPS (lpj=3096006)
[ 0.270602] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.271518] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.272520] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.274518] Speculative Store Bypass: Vulnerable
[ 0.275518] Spectre V2 : Mitigation: Retpolines
[ 0.276518] ITS: Mitigation: Aligned branch/return thunks
[ 0.277518] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.279518] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.281518] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.282519] active return thunk: its_return_thunk
[ 0.283519] x86/fpu: x87 FPU will use FXSAVE
[ 0.300085] Freeing SMP alternatives memory: 40K
[ 0.300521] pid_max: default: 32768 minimum: 301
[ 0.301796] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.303940] landlock: Up and running.
[ 0.305517] Yama: becoming mindful.
[ 0.306639] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.307520] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.412295] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.413521] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.414547] signal: max sigframe size: 1440
[ 0.415546] rcu: Hierarchical SRCU implementation.
[ 0.417517] rcu: Max phase no-delay instances is 400.
[ 0.418559] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.424136] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.425564] smp: Bringing up secondary CPUs ...
[ 0.426616] smpboot: x86: Booting SMP configuration:
[ 0.428517] .... node #0, CPUs: #1 #2 #3
[ 0.432577] smp: Brought up 1 node, 4 CPUs
[ 0.434519] smpboot: Total of 4 processors activated (24768.04 BogoMIPS)
[ 0.436672] Memory: 3999444K/4193760K available (14650K kernel code, 2032K rwdata, 9844K rodata, 2996K init, 1168K bss, 189432K reserved, 0K cma-reserved)
[ 0.439517] devtmpfs: initialized
[ 0.440559] x86/mm: Memory block size: 128MB
[ 0.442568] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.443524] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.444524] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.446990] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.447613] audit: initializing netlink subsys (disabled)
[ 0.449522] audit: type=2000 audit(1785257533.110:1): state=initialized audit_enabled=0 res=1
[ 0.449564] thermal_sys: Registered thermal governor 'step_wise'
[ 0.450528] cpuidle: using governor ladder
[ 0.452523] cpuidle: using governor menu
[ 0.454520] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.456697] PCI: Using configuration type 1 for base access
[ 0.457595] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.459565] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.460518] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.461700] ACPI: Added _OSI(Module Device)
[ 0.463518] ACPI: Added _OSI(Processor Device)
[ 0.464518] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.466984] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.468623] ACPI: Interpreter enabled
[ 0.469525] ACPI: PM: (supports S0 S3 S5)
[ 0.470518] ACPI: Using IOAPIC for interrupt routing
[ 0.472530] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.473517] PCI: Using E820 reservations for host bridge windows
[ 0.475602] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.479233] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.480521] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.482519] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.485524] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.488760] acpiphp: Slot [3] registered
[ 0.489539] acpiphp: Slot [4] registered
[ 0.491538] acpiphp: Slot [5] registered
[ 0.492538] acpiphp: Slot [6] registered
[ 0.493557] acpiphp: Slot [7] registered
[ 0.494538] acpiphp: Slot [8] registered
[ 0.496556] acpiphp: Slot [9] registered
[ 0.497540] acpiphp: Slot [10] registered
[ 0.498544] acpiphp: Slot [11] registered
[ 0.499538] acpiphp: Slot [12] registered
[ 0.501404] acpiphp: Slot [13] registered
[ 0.502538] acpiphp: Slot [14] registered
[ 0.503538] acpiphp: Slot [15] registered
[ 0.504538] acpiphp: Slot [16] registered
[ 0.505540] acpiphp: Slot [17] registered
[ 0.506537] acpiphp: Slot [18] registered
[ 0.508538] acpiphp: Slot [19] registered
[ 0.509550] acpiphp: Slot [20] registered
[ 0.510561] acpiphp: Slot [21] registered
[ 0.511459] acpiphp: Slot [22] registered
[ 0.513422] acpiphp: Slot [23] registered
[ 0.514541] acpiphp: Slot [24] registered
[ 0.515540] acpiphp: Slot [25] registered
[ 0.516540] acpiphp: Slot [26] registered
[ 0.517544] acpiphp: Slot [27] registered
[ 0.519554] acpiphp: Slot [28] registered
[ 0.520538] acpiphp: Slot [29] registered
[ 0.521537] acpiphp: Slot [30] registered
[ 0.522540] acpiphp: Slot [31] registered
[ 0.524534] PCI host bridge to bus 0000:00
[ 0.525538] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.527518] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.528518] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.530518] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.533536] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.535518] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.536629] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.540083] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.543328] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.547627] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.548571] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.550518] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.552518] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.554518] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.556518] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.559517] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.561531] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.563878] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.568560] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.569543] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.571581] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.573638] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.576518] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.580518] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.582531] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.584568] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.586531] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.589517] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.593537] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.594535] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.596570] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.599844] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.604518] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.605532] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.607565] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.613360] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.615668] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.617664] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.619648] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.621582] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.624007] iommu: Default domain type: Translated
[ 0.625521] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.627521] SCSI subsystem initialized
[ 0.628612] pps_core: LinuxPPS API ver. 1 registered
[ 0.629517] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.632523] PTP clock support registered
[ 0.633777] PCI: Using ACPI for IRQ routing
[ 0.635767] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.637555] clocksource: Switched to clocksource kvm-clock
[ 0.639902] VFS: Disk quotas dquot_6.6.0
[ 0.641103] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.643084] pnp: PnP ACPI init
[ 0.644339] pnp: PnP ACPI: found 6 devices
[ 0.651575] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.654140] NET: Registered PF_INET protocol family
[ 0.655816] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.666201] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.669043] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.671605] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.674349] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.676860] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.679181] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.681631] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.683817] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.686244] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.688146] NET: Registered PF_XDP protocol family
[ 0.689830] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.691921] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.693711] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.695505] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.697394] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.699304] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.700908] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.702604] PCI: CLS 0 bytes, default 64
[ 0.703767] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.703849] Unpacking initramfs...
[ 0.704125] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.709591] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.713109] Initialise system trusted keyrings
[ 0.714768] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.722507] Key type asymmetric registered
[ 0.723913] Asymmetric key parser 'x509' registered
[ 0.725555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.728140] io scheduler mq-deadline registered
[ 0.729424] io scheduler kyber registered
[ 0.730592] io scheduler bfq registered
[ 0.733212] ERST DBG: ERST support is disabled.
[ 0.735373] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.739363] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.748249] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.751759] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.753878] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.756802] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.759234] scsi host0: ata_piix
[ 0.760496] scsi host1: ata_piix
[ 0.761616] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.763828] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.766050] hv_vmbus: registering driver hv_netvsc
[ 0.767632] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.770951] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.772547] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.774059] hv_vmbus: registering driver hyperv_keyboard
[ 0.775706] rtc_cmos 00:05: RTC can wake from S4
[ 0.778080] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.778762] rtc_cmos 00:05: registered as rtc0
[ 0.781877] rtc_cmos 00:05: setting system clock to 2026-07-28T16:52:12 UTC (1785257532)
[ 0.782842] Freeing initrd memory: 10596K
[ 0.784298] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.787813] intel_pstate: CPU model not supported
[ 0.789338] gre: GRE over IPv4 demultiplexer driver
[ 0.790930] NET: Registered PF_INET6 protocol family
[ 0.792794] Segment Routing with IPv6
[ 0.794025] In-situ OAM (IOAM) with IPv6
[ 0.795439] Key type dns_resolver registered
[ 0.796791] IPI shorthand broadcast: enabled
[ 0.799824] sched_clock: Marking stable (586008320, 213681508)->(833528791, -33838963)
[ 0.802468] registered taskstats version 1
[ 0.803837] Loading compiled-in X.509 certificates
[ 0.808488] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.813093] Demotion targets for Node 0: null
[ 0.814789] Key type .fscrypt registered
[ 0.816000] Key type fscrypt-provisioning registered
[ 0.920546] ata2: found unknown device (class 0)
[ 0.928440] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.939918] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.971081] Freeing unused kernel image (initmem) memory: 2996K
[ 0.978450] Write protecting the kernel read-only data: 26624k
[ 0.990194] Freeing unused kernel image (text/rodata gap) memory: 1732K
[ 0.997758] Freeing unused kernel image (rodata/data gap) memory: 396K
[ 1.002607] rodata_test: all tests were successful
[ 1.005794] Run /init as init process
[ 1.017513] Alpine Init 3.14.0-r0
[ 1.019570] Loading boot drivers...
[ 1.038401] ACPI: bus type USB registered
[ 1.039774] usbcore: registered new interface driver usbfs
[ 1.041457] usbcore: registered new interface driver hub
[ 1.043120] usbcore: registered new device driver usb
[ 1.047693] usbcore: registered new interface driver usb-storage
[ 1.106285] loop: module loaded
[ 1.133575] ACPI: bus type drm_connector registered
[ 1.151846] Loading boot drivers: ok.
[ 1.154575] Mounting root...
[ 1.176781] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.179098] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.185487] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.186835] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.188974] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.203397] Console: switching to colour frame buffer device 160x50
[ 1.206196] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.248646] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.284590] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.329984] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.341108] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.346800] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.352059] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.398863] block sr0: the capability attribute has been deprecated.
[ 1.948993] EXT4-fs (vda): mounted filesystem 7af5430b-f94c-484c-8fe6-36878b6de03a ro with ordered data mode. Quota mode: none.
[ 1.962099] Mounting root: ok.
[ 2.483699] random: crng init done
Welcome to Alpine Linux 3.24
Kernel 6.18.35-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.6-r0 -> 3.0.7-r0)
(2/2) Upgrading apk-tools (3.0.6-r0 -> 3.0.7-r0)
Executing busybox-1.37.0-r31.trigger
Continuing with the main upgrade transaction:
( 1/17) Upgrading libblkid (2.42-r0 -> 2.42.1-r0)
( 2/17) Upgrading blkid (2.42-r0 -> 2.42.1-r0)
( 3/17) Upgrading libsmartcols (2.42-r0 -> 2.42.1-r0)
( 4/17) Upgrading partx (2.42-r0 -> 2.42.1-r0)
( 5/17) Upgrading libuuid (2.42-r0 -> 2.42.1-r0)
( 6/17) Upgrading libfdisk (2.42-r0 -> 2.42.1-r0)
( 7/17) Upgrading sfdisk (2.42-r0 -> 2.42.1-r0)
( 8/17) Upgrading libexpat (2.8.1-r0 -> 2.8.2-r0)
( 9/17) Upgrading py3-charset-normalizer (3.4.7-r0 -> 3.4.9-r0)
(10/17) Upgrading py3-charset-normalizer-pyc (3.4.7-r0 -> 3.4.9-r0)
(11/17) Upgrading tzdata (2026b-r0 -> 2026c-r0)
(12/17) Upgrading device-mapper-libs (2.03.35-r2 -> 2.03.35-r3)
(13/17) Upgrading linux-virt (6.18.35-r0 -> 6.18.40-r0)
(14/17) Upgrading libmount (2.42-r0 -> 2.42.1-r0)
(15/17) Upgrading mount (2.42-r0 -> 2.42.1-r0)
(16/17) Upgrading libnvmemi (1.16.1-r1 -> 1.16.2-r0)
(17/17) Upgrading libnvme (1.16.1-r1 -> 1.16.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.14.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.40-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 131.3 MiB in 201 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/12) Installing brotli-libs (1.2.0-r1)
( 2/12) Installing c-ares (1.34.8-r0)
( 3/12) Installing libunistring (1.4.2-r0)
( 4/12) Installing libidn2 (2.3.8-r0)
( 5/12) Installing nghttp2-libs (1.69.0-r0)
( 6/12) Installing libpsl (0.21.5-r3)
( 7/12) Installing libcurl (8.21.0-r0)
( 8/12) Installing pcre2 (10.47-r1)
( 9/12) Installing git (2.54.0-r0)
(10/12) Installing git-init-template (2.54.0-r0)
(11/12) Installing gnu-libiconv-libs (1.18-r0)
(12/12) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r31.trigger
OK: 143.9 MiB in 213 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/xK.git xK
Cloning into 'xK'...
remote: Enumerating objects: 5574, done.
remote: Counting objects: 100% (1531/1531), done.
remote: Compressing objects: 100% (609/609), done.
remote: Total 5574 (delta 969), reused 1386 (delta 875), pack-reused 4043 (from 1)
Receiving objects: 100% (5574/5574), 2.08 MiB | 27.63 MiB/s, done.
Resolving deltas: 100% (3680/3680), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Submodule 'termo' (https://git.janouch.name/p/termo.git) registered for path 'termo'
Cloning into '/home/ci/xK/liberty'...
remote: Enumerating objects: 921, done.
remote: Counting objects: 100% (390/390), done.
remote: Compressing objects: 100% (387/387), done.
remote: Total 921 (delta 249), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (921/921), 447.77 KiB | 19.47 MiB/s, done.
Resolving deltas: 100% (570/570), done.
Cloning into '/home/ci/xK/termo'...
remote: Enumerating objects: 1982, done.
remote: Counting objects: 100% (43/43), done.
remote: Compressing objects: 100% (42/42), done.
remote: Total 1982 (delta 15), reused 0 (delta 0), pack-reused 1939 (from 1)
Receiving objects: 100% (1982/1982), 1.39 MiB | 26.94 MiB/s, done.
Resolving deltas: 100% (1260/1260), done.
Submodule path 'liberty': checked out 'fbb577f3f819c12907d0c05a5cf49ed9bb00b8be'
Submodule path 'termo': checked out 'a8f3f6eca3fec9e7faf85d97201a567d73636662'
+ cd xK
+ git -c 'advice.detachedHead=false' checkout bcfbd400035c8a7bb31eafc8146cddbaa645d82b
HEAD is now at bcfbd40 xC/xP: implement session resumption
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=2.2.0-26-gbcfbd40
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/2.2.0-26-gbcfbd40/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake pkgconf asciidoctor openssl-dev lua5.4-dev perl
( 1/38) Installing gmp (6.3.0-r4)
( 2/38) Installing ruby-libs (3.4.9-r0)
( 3/38) Installing libucontext (1.5.1-r0)
( 4/38) Installing ruby (3.4.9-r0)
( 5/38) Installing asciidoctor (2.0.26-r0)
( 6/38) Installing jansson (2.15.0-r0)
( 7/38) Installing binutils (2.45.1-r1)
( 8/38) Installing libmagic (5.47-r2)
( 9/38) Installing file (5.47-r2)
(10/38) Installing libgcc-static (15.2.0-r5)
(11/38) Installing libgomp (15.2.0-r5)
(12/38) Installing libatomic (15.2.0-r5)
(13/38) Installing isl26 (0.26-r2)
(14/38) Installing mpfr4 (4.2.2-r0)
(15/38) Installing mpc1 (1.3.1-r1)
(16/38) Installing gcc (15.2.0-r5)
(17/38) Installing libstdc++-dev (15.2.0-r5)
(18/38) Installing musl-dev (1.2.6-r2)
(19/38) Installing g++ (15.2.0-r5)
(20/38) Installing make (4.4.1-r4)
(21/38) Installing fortify-headers (3.0.1-r2)
(22/38) Installing patch (2.8-r0)
(23/38) Installing build-base (0.5-r4)
(24/38) Installing acl-libs (2.3.2-r1)
(25/38) Installing lz4-libs (1.10.0-r1)
(26/38) Installing libarchive (3.8.7-r0)
(27/38) Installing rhash-libs (1.4.6-r0)
(28/38) Installing libuv (1.52.1-r0)
(29/38) Installing cmake (4.2.3-r0)
(30/38) Installing lua5.4-libs (5.4.8-r0)
(31/38) Installing lua5.4 (5.4.8-r0)
(32/38) Installing pkgconf (2.5.1-r0)
(33/38) Installing lua5.4-dev (5.4.8-r0)
(34/38) Installing openssl-dev (3.5.7-r0)
(35/38) Installing perl (5.42.2-r0)
(36/38) Installing perl-error (0.17030-r0)
(37/38) Installing perl-git (2.54.0-r0)
(38/38) Installing git-perl (2.54.0-r0)
Executing busybox-1.37.0-r31.trigger
OK: 527.5 MiB in 251 packages
+ doas apk add --no-interactive mingw-w64-gcc i686-mingw-w64-gcc cmake make sox rsvg-convert icoutils
( 1/65) Installing i686-mingw-w64-binutils (2.45.1-r0)
( 2/65) Installing i686-mingw-w64-crt (14.0.0-r0)
( 3/65) Installing i686-mingw-w64-headers (14.0.0-r0)
( 4/65) Installing i686-mingw-w64-winpthreads (14.0.0-r0)
( 5/65) Installing i686-mingw-w64-gcc (15.2.0-r0)
( 6/65) Installing perl-http-date (6.06-r0)
( 7/65) Installing perl-clone (0.50-r0)
( 8/65) Installing perl-mime-base32 (1.303-r3)
( 9/65) Installing perl-mime-base64 (3.16-r7)
(10/65) Installing perl-uri (5.34-r0)
(11/65) Installing perl-io-html (1.004-r1)
(12/65) Installing perl-encode-locale (1.05-r5)
(13/65) Installing perl-lwp-mediatypes (6.04-r3)
(14/65) Installing perl-http-message (7.02-r0)
(15/65) Installing perl-http-cookies (6.11-r0)
(16/65) Installing perl-net-http (6.24-r0)
(17/65) Installing perl-html-tagset (3.24-r0)
(18/65) Installing perl-html-parser (3.85-r0)
(19/65) Installing perl-file-listing (6.16-r0)
(20/65) Installing perl-www-robotrules (6.02-r5)
(21/65) Installing perl-http-negotiate (6.01-r5)
(22/65) Installing perl-try-tiny (0.32-r0)
(23/65) Installing perl-libwww (6.83-r0)
(24/65) Installing libpng (1.6.58-r1)
(25/65) Installing icoutils (0.32.3-r4)
(26/65) Installing mingw-w64-binutils (2.45.1-r0)
(27/65) Installing mingw-w64-crt (14.0.0-r0)
(28/65) Installing mingw-w64-headers (14.0.0-r0)
(29/65) Installing mingw-w64-winpthreads (14.0.0-r0)
(30/65) Installing mingw-w64-gcc (15.2.0-r0)
(31/65) Installing libxau (1.0.12-r0)
(32/65) Installing libxdmcp (1.1.5-r1)
(33/65) Installing libxcb (1.17.0-r2)
(34/65) Installing libx11 (1.8.13-r0)
(35/65) Installing libxext (1.3.7-r0)
(36/65) Installing libxrender (0.9.12-r0)
(37/65) Installing freetype (2.14.3-r0)
(38/65) Installing fontconfig (2.17.1-r1)
(39/65) Installing pixman (0.46.4-r0)
(40/65) Installing cairo (1.18.4-r1)
(41/65) Installing libdav1d (1.5.3-r0)
(42/65) Installing libintl (1.0-r0)
(43/65) Installing glib (2.88.1-r1)
(44/65) Installing graphite2 (1.3.14-r6)
(45/65) Installing harfbuzz (13.2.1-r0)
(46/65) Installing libxft (2.3.9-r0)
(47/65) Installing fribidi (1.0.16-r3)
(48/65) Installing pango (1.57.1-r0)
(49/65) Installing libxml2 (2.13.9-r2)
(50/65) Installing rsvg-convert (2.62.3-r0)
(51/65) Installing libogg (1.3.6-r0)
(52/65) Installing libflac (1.4.3-r2)
(53/65) Installing alsa-lib (1.2.15.3-r0)
(54/65) Installing libao (1.2.2-r3)
(55/65) Installing gsm (1.0.23-r0)
(56/65) Installing libid3tag (0.16.3-r0)
(57/65) Installing libltdl (2.6.0-r1)
(58/65) Installing libmad (0.15.1b-r10)
(59/65) Installing lame-libs (3.100-r5)
(60/65) Installing opus (1.6.1-r0)
(61/65) Installing opusfile (0.12-r6)
(62/65) Installing mpg123-libs (1.33.5-r0)
(63/65) Installing libvorbis (1.3.7-r2)
(64/65) Installing libsndfile (1.2.2-r2)
(65/65) Installing sox (14.4.2-r14)
Executing busybox-1.37.0-r31.trigger
Executing glib-2.88.1-r1.trigger
OK: 1542.5 MiB in 316 packages
+ doas apk add --no-interactive build-base cmake make sox rsvg-convert qt6-qtbase-dev qt6-qtmultimedia-dev
( 1/347) Installing libb2 (0.98.1-r3)
( 2/347) Installing dbus-libs (1.16.2-r2)
( 3/347) Installing double-conversion (3.4.0-r0)
( 4/347) Installing icu-data-en (78.1-r0)
Executing icu-data-en-78.1-r0.post-install
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
( 5/347) Installing icu-libs (78.1-r0)
( 6/347) Installing libpcre2-16 (10.47-r1)
( 7/347) Installing duktape-libs (2.7.0-r3)
( 8/347) Installing libproxy (0.5.12-r0)
( 9/347) Installing qt6-qtbase (6.11.1-r0)
( 10/347) Installing mariadb-connector-c (3.4.6-r0)
( 11/347) Installing qt6-qtbase-mysql (6.11.1-r0)
( 12/347) Installing unixodbc (2.3.14-r1)
( 13/347) Installing qt6-qtbase-odbc (6.11.1-r0)
( 14/347) Installing libpq (18.4-r0)
( 15/347) Installing qt6-qtbase-postgresql (6.11.1-r0)
( 16/347) Installing qt6-qtbase-sqlite (6.11.1-r0)
( 17/347) Installing hicolor-icon-theme (0.18-r0)
( 18/347) Installing xprop (1.2.8-r0)
( 19/347) Installing libice (1.1.2-r0)
( 20/347) Installing libsm (1.2.6-r0)
( 21/347) Installing libxt (1.3.1-r0)
( 22/347) Installing libxmu (1.3.1-r0)
( 23/347) Installing xset (1.2.5-r1)
( 24/347) Installing xdg-utils (1.2.1-r1)
( 25/347) Installing llvm22-libs (22.1.3-r0)
( 26/347) Installing spirv-tools (1.4.341.0-r0)
( 27/347) Installing hwdata-pci (0.408-r0)
( 28/347) Installing libpciaccess (0.19-r0)
( 29/347) Installing libdrm (2.4.134-r0)
( 30/347) Installing libxshmfence (1.3.3-r0)
( 31/347) Installing mesa (26.1.1-r1)
( 32/347) Installing mesa-gles (26.1.1-r1)
( 33/347) Installing mesa-gbm (26.1.1-r1)
( 34/347) Installing wayland-libs-client (1.25.0-r0)
( 35/347) Installing mesa-egl (26.1.1-r1)
( 36/347) Installing libxxf86vm (1.1.7-r0)
( 37/347) Installing mesa-gl (26.1.1-r1)
( 38/347) Installing wayland-libs-cursor (1.25.0-r0)
( 39/347) Installing wayland-libs-egl (1.25.0-r0)
( 40/347) Installing xkeyboard-config (2.47-r0)
( 41/347) Installing libxkbcommon (1.13.1-r0)
( 42/347) Installing qt6-qtbase-wayland (6.11.1-r0)
( 43/347) Installing avahi-libs (0.9_rc4-r0)
( 44/347) Installing nettle (3.10.2-r0)
( 45/347) Installing libtasn1 (4.21.0-r0)
( 46/347) Installing p11-kit (0.26.2-r0)
( 47/347) Installing gnutls (3.8.13-r0)
( 48/347) Installing cups-libs (2.4.19-r0)
( 49/347) Installing libevdev (1.13.6-r0)
( 50/347) Installing mtdev (1.1.7-r0)
( 51/347) Installing eudev-libs (3.2.14-r6)
( 52/347) Installing libinput-libs (1.31.3-r0)
( 53/347) Installing libjpeg-turbo (3.1.3-r0)
( 54/347) Installing tslib (1.24-r0)
( 55/347) Installing xcb-util (0.4.1-r3)
( 56/347) Installing xcb-util-image (0.4.1-r0)
( 57/347) Installing xcb-util-renderutil (0.3.10-r0)
( 58/347) Installing xcb-util-cursor (0.1.5-r0)
( 59/347) Installing xcb-util-wm (0.4.2-r0)
( 60/347) Installing xcb-util-keysyms (0.4.1-r0)
( 61/347) Installing libxkbcommon-x11 (1.13.1-r0)
( 62/347) Installing qt6-qtbase-x11 (6.11.1-r0)
( 63/347) Installing libxi (1.8.3-r0)
( 64/347) Installing at-spi2-core-libs (2.60.5-r0)
( 65/347) Installing libxtst (1.2.5-r0)
( 66/347) Installing at-spi2-core (2.60.5-r0)
( 67/347) Installing libatk-1.0 (2.60.5-r0)
( 68/347) Installing libatk-bridge-2.0 (2.60.5-r0)
( 69/347) Installing dbus-dev (1.16.2-r2)
( 70/347) Installing bzip2-dev (1.0.8-r6)
( 71/347) Installing libxml2-utils (2.13.9-r2)
( 72/347) Installing docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.post-install
( 73/347) Installing libxslt (1.1.43-r3)
( 74/347) Installing docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.post-install
( 75/347) Installing docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.post-install
( 76/347) Installing docbook-xsl (1.79.2-r13)
( 77/347) Installing xz (5.8.3-r0)
( 78/347) Installing gettext-asprintf (1.0-r0)
( 79/347) Installing gettext-libs (1.0-r0)
( 80/347) Installing gettext-envsubst (1.0-r0)
( 81/347) Installing gettext (1.0-r0)
( 82/347) Installing gettext-dev (1.0-r0)
( 83/347) Installing py3-parsing (3.3.2-r1)
( 84/347) Installing py3-parsing-pyc (3.3.2-r1)
( 85/347) Installing py3-packaging (26.2-r0)
( 86/347) Installing py3-packaging-pyc (26.2-r0)
( 87/347) Installing linux-headers (7.0.0-r1)
( 88/347) Installing libffi-dev (3.5.2-r1)
( 89/347) Installing bsd-compat-headers (0.7.2-r6)
( 90/347) Installing libformw (6.6_p20260516-r0)
( 91/347) Installing libmenuw (6.6_p20260516-r0)
( 92/347) Installing libncurses++ (6.6_p20260516-r0)
( 93/347) Installing ncurses-dev (6.6_p20260516-r0)
( 94/347) Installing libedit-dev (20260508.3.1-r1)
( 95/347) Installing zlib-dev (1.3.2-r0)
( 96/347) Installing libpcre2-32 (10.47-r1)
( 97/347) Installing pcre2-dev (10.47-r1)
( 98/347) Installing liblastlog2 (2.42.1-r0)
( 99/347) Installing sqlite (3.53.2-r0)
(100/347) Installing sqlite-dev (3.53.2-r0)
(101/347) Installing util-linux-dev (2.42.1-r0)
(102/347) Installing glib-dev (2.88.1-r1)
(103/347) Installing xorgproto (2025.1-r0)
(104/347) Installing libxau-dev (1.0.12-r0)
(105/347) Installing xcb-proto (1.17.0-r1)
(106/347) Installing xcb-proto-pyc (1.17.0-r1)
(107/347) Installing libxdmcp-dev (1.1.5-r1)
(108/347) Installing libxcb-dev (1.17.0-r2)
(109/347) Installing xtrans (1.6.0-r0)
(110/347) Installing libx11-dev (1.8.13-r0)
(111/347) Installing libxext-dev (1.3.7-r0)
(112/347) Installing libxfixes (6.0.2-r0)
(113/347) Installing libxfixes-dev (6.0.2-r0)
(114/347) Installing libxi-dev (1.8.3-r0)
(115/347) Installing libxtst-dev (1.2.5-r0)
(116/347) Installing at-spi2-core-dev (2.60.5-r0)
(117/347) Installing libgpg-error (1.61-r0)
(118/347) Installing libgcrypt (1.12.2-r0)
(119/347) Installing libgpg-error-dev (1.61-r0)
(120/347) Installing libgcrypt-dev (1.12.2-r0)
(121/347) Installing gnutls-c++ (3.8.13-r0)
(122/347) Installing libgmpxx (6.3.0-r4)
(123/347) Installing gmp-dev (6.3.0-r4)
(124/347) Installing nettle-dev (3.10.2-r0)
(125/347) Installing brotli (1.2.0-r1)
(126/347) Installing brotli-dev (1.2.0-r1)
(127/347) Installing libidn2-dev (2.3.8-r0)
(128/347) Installing libtasn1-progs (4.21.0-r0)
(129/347) Installing libtasn1-dev (4.21.0-r0)
(130/347) Installing zstd (1.5.7-r2)
(131/347) Installing zstd-dev (1.5.7-r2)
(132/347) Installing p11-kit-dev (0.26.2-r0)
(133/347) Installing gnutls-dev (3.8.13-r0)
(134/347) Installing gdbm-tools (1.26-r0)
(135/347) Installing gdbm-dev (1.26-r0)
(136/347) Installing avahi-compat-howl (0.9_rc4-r0)
(137/347) Installing avahi-compat-libdns_sd (0.9_rc4-r0)
(138/347) Installing avahi-glib (0.9_rc4-r0)
(139/347) Installing libdaemon (0.14-r6)
(140/347) Installing libevent (2.1.13-r0)
(141/347) Installing avahi (0.9_rc4-r0)
Executing avahi-0.9_rc4-r0.pre-install
(142/347) Installing dbus (1.16.2-r2)
Executing dbus-1.16.2-r2.pre-install
Executing dbus-1.16.2-r2.post-install
(143/347) Installing dbus-openrc (1.16.2-r2)
(144/347) Installing dbus-daemon-launch-helper (1.16.2-r2)
(145/347) Installing avahi-openrc (0.9_rc4-r0)
(146/347) Installing libevent-dev (2.1.13-r0)
(147/347) Installing avahi-dev (0.9_rc4-r0)
(148/347) Installing cups-dev (2.4.19-r0)
(149/347) Installing double-conversion-dev (3.4.0-r0)
(150/347) Installing eudev-dev (3.2.14-r6)
(151/347) Installing expat (2.8.2-r0)
(152/347) Installing expat-dev (2.8.2-r0)
(153/347) Installing libpng-dev (1.6.58-r1)
(154/347) Installing freetype-dev (2.14.3-r0)
(155/347) Installing fontconfig-dev (2.17.1-r1)
(156/347) Installing harfbuzz-cairo (13.2.1-r0)
(157/347) Installing harfbuzz-gobject (13.2.1-r0)
(158/347) Installing harfbuzz-icu (13.2.1-r0)
(159/347) Installing harfbuzz-subset (13.2.1-r0)
(160/347) Installing cairo-tools (1.18.4-r1)
(161/347) Installing cairo-gobject (1.18.4-r1)
(162/347) Installing pixman-dev (0.46.4-r0)
(163/347) Installing libxrender-dev (0.9.12-r0)
(164/347) Installing cairo-dev (1.18.4-r1)
(165/347) Installing graphite2-dev (1.3.14-r6)
(166/347) Installing icu (78.1-r0)
(167/347) Installing icu-dev (78.1-r0)
(168/347) Installing harfbuzz-dev (13.2.1-r0)
(169/347) Installing libb2-dev (0.98.1-r3)
(170/347) Installing libinput-dev (1.31.3-r0)
(171/347) Installing libturbojpeg (3.1.3-r0)
(172/347) Installing libjpeg-turbo-dev (3.1.3-r0)
(173/347) Installing libpq-dev (18.4-r0)
(174/347) Installing libproxy-dev (0.5.12-r0)
(175/347) Installing xz-dev (5.8.3-r0)
(176/347) Installing libxml2-dev (2.13.9-r2)
(177/347) Installing libxkbcommon-dev (1.13.1-r0)
(178/347) Installing fmt (11.2.0-r1)
(179/347) Installing fmt-dev (11.2.0-r1)
(180/347) Installing mariadb-connector-c-dev (3.4.6-r0)
(181/347) Installing mariadb-common (11.8.8-r0)
(182/347) Installing libaio (0.3.113-r2)
(183/347) Installing mariadb-embedded (11.8.8-r0)
(184/347) Installing mariadb-dev (11.8.8-r0)
(185/347) Installing libpciaccess-dev (0.19-r0)
(186/347) Installing libdrm-dev (2.4.134-r0)
(187/347) Installing libxdamage (1.1.7-r0)
(188/347) Installing libxdamage-dev (1.1.7-r0)
(189/347) Installing libxshmfence-dev (1.3.3-r0)
(190/347) Installing clang22-headers (22.1.3-r2)
(191/347) Installing libclc (22.1.3-r0)
(192/347) Installing spirv-llvm-translator-libs (22.1.0-r0)
(193/347) Installing clang22-libs (22.1.3-r2)
(194/347) Installing mesa-rusticl (26.1.1-r1)
(195/347) Installing libxxf86vm-dev (1.1.7-r0)
(196/347) Installing mesa-dev (26.1.1-r1)
(197/347) Installing tslib-dev (1.24-r0)
(198/347) Installing unixodbc-dev (2.3.14-r1)
(199/347) Installing vulkan-headers (1.4.347-r0)
(200/347) Installing vulkan-loader (1.4.347-r0)
(201/347) Installing vulkan-loader-dev (1.4.347-r0)
(202/347) Installing wayland-libs-server (1.25.0-r0)
(203/347) Installing qt6-qtsvg (6.11.1-r0)
(204/347) Installing qt6-qtdeclarative (6.11.1-r0)
(205/347) Installing qt6-qtwayland (6.11.1-r0)
(206/347) Installing wayland-dev (1.25.0-r0)
(207/347) Installing util-macros (1.20.2-r0)
(208/347) Installing xcb-util-dev (0.4.1-r3)
(209/347) Installing xcb-util-image-dev (0.4.1-r0)
(210/347) Installing xcb-util-renderutil-dev (0.3.10-r0)
(211/347) Installing xcb-util-cursor-dev (0.1.5-r0)
(212/347) Installing xcb-util-keysyms-dev (0.4.1-r0)
(213/347) Installing xcb-util-wm-dev (0.4.2-r0)
(214/347) Installing qt6-qtbase-dev (6.11.1-r0)
(215/347) Installing libasyncns (0.8-r5)
(216/347) Installing orc (0.4.41-r0)
(217/347) Installing soxr (0.1.3-r7)
(218/347) Installing speexdsp (1.2.1-r2)
(219/347) Installing tdb-libs (1.4.15-r1)
(220/347) Installing libpulse (17.0-r7)
(221/347) Installing qt6-qtmultimedia (6.11.1-r0)
(222/347) Installing libxrandr (1.5.5-r0)
(223/347) Installing libSvtAv1Enc (4.1.0-r0)
(224/347) Installing aom-libs (3.14.1-r0)
(225/347) Installing libva (2.23.0-r0)
(226/347) Installing libvdpau (1.5-r4)
(227/347) Installing libvpl (2.15.0-r1)
(228/347) Installing ffmpeg-libavutil (8.1.2-r0)
(229/347) Installing libhwy (1.3.0-r0)
(230/347) Installing lcms2 (2.19-r0)
(231/347) Installing libjxl (0.11.2-r1)
(232/347) Installing rav1e-libs (0.8.1-r0)
(233/347) Installing ffmpeg-libswresample (8.1.2-r0)
(234/347) Installing libtheora (1.2.0-r1)
(235/347) Installing libvpx (1.15.2-r1)
(236/347) Installing libsharpyuv (1.6.0-r0)
(237/347) Installing libwebp (1.6.0-r0)
(238/347) Installing libwebpmux (1.6.0-r0)
(239/347) Installing x264-libs (0.164.3108-r1)
(240/347) Installing numactl (2.0.19-r0)
(241/347) Installing x265-libs (4.1-r0)
(242/347) Installing xvidcore (1.3.7-r2)
(243/347) Installing ffmpeg-libavcodec (8.1.2-r0)
(244/347) Installing libudfread (1.2.0-r1)
(245/347) Installing libbluray (1.4.0-r0)
(246/347) Installing libdvdcss (1.4.3-r0)
(247/347) Installing libdvdread (6.1.3-r2)
(248/347) Installing libdvdnav (6.1.1-r1)
(249/347) Installing libopenmpt (0.8.7-r0)
(250/347) Installing cjson (1.7.19-r1)
(251/347) Installing mbedtls3 (3.6.7-r0)
(252/347) Installing librist (0.2.15-r0)
(253/347) Installing libsrt (1.5.3-r1)
(254/347) Installing libssh (0.12.1-r0)
(255/347) Installing libsodium (1.0.22-r0)
(256/347) Installing libzmq (4.3.5-r2)
(257/347) Installing ffmpeg-libavformat (8.1.2-r0)
(258/347) Installing glslang-libs (1.4.341.0-r0)
(259/347) Installing shaderc (2026.1-r0)
(260/347) Installing ffmpeg-libswscale (8.1.2-r0)
(261/347) Installing qt6-qtmultimedia-ffmpeg (6.11.1-r0)
(262/347) Installing libxv (1.0.13-r0)
(263/347) Installing cdparanoia-libs (10.2-r14)
(264/347) Installing graphene (1.10.8-r5)
(265/347) Installing gstreamer (1.28.3-r0)
(266/347) Installing gstreamer-ptp-helper (1.28.3-r0)
(267/347) Installing gst-plugins-base (1.28.3-r0)
(268/347) Installing openexr-libiex (3.4.13-r0)
(269/347) Installing imath (3.2.2-r1)
(270/347) Installing openexr-libilmthread (3.4.13-r0)
(271/347) Installing libdeflate (1.25-r0)
(272/347) Installing openexr-libopenexrcore (3.4.13-r0)
(273/347) Installing openexr-libopenexr (3.4.13-r0)
(274/347) Installing soundtouch (2.4.1-r0)
(275/347) Installing libunibreak (6.1-r0)
(276/347) Installing libass (0.17.4-r1)
(277/347) Installing libraw1394 (2.1.2-r5)
(278/347) Installing libusb (1.0.30-r0)
(279/347) Installing libdc1394 (2.2.7-r0)
(280/347) Installing libde265 (1.0.18-r0)
(281/347) Installing directfb (1.7.7-r8)
(282/347) Installing faac (1.31.1-r0)
(283/347) Installing faad2-libs (2.11.2-r0)
(284/347) Installing fdk-aac (2.0.2-r4)
(285/347) Installing flite (2.2-r6)
(286/347) Installing libfreeaptx (0.2.2-r0)
(287/347) Installing gobject-introspection (1.86.0-r1)
(288/347) Installing shared-mime-info (2.4-r7)
(289/347) Installing libxcomposite (0.4.7-r0)
(290/347) Installing libxcursor (1.2.3-r0)
(291/347) Installing libxinerama (1.1.6-r0)
(292/347) Installing libepoxy (1.5.10-r1)
(293/347) Installing bubblewrap (0.11.2-r0)
(294/347) Installing libglycin (2.1.5-r0)
Executing libglycin-2.1.5-r0.post-install
* glycin loaders got split into their individual subpackages.
* By default, only glycin-image-rs & glycin-svg are installed.
* Additional loader subpackages are glycin-heif, glycin-jxl & glycin-raw.
*
* To install all available loaders, install glycin-loaders-all.
*
* Also the glycin-thumbnailer got subpackaged and isn't installed by default.
(295/347) Installing glycin-image-rs (2.1.5-r0)
(296/347) Installing librsvg (2.62.3-r0)
(297/347) Installing glycin-svg (2.1.5-r0)
(298/347) Installing gdk-pixbuf (2.44.7-r1)
(299/347) Installing gtk+3.0 (3.24.52-r0)
(300/347) Installing libgudev (238-r1)
(301/347) Installing libldac (2.0.2.3-r1)
(302/347) Installing libmodplug (0.8.9.0-r3)
(303/347) Installing neon (0.36.0-r0)
(304/347) Installing openal-soft-libs (1.25.2-r0)
(305/347) Installing openh264 (2.6.0-r0)
(306/347) Installing openjpeg (2.5.4-r1)
(307/347) Installing librtmp (2.4_git20190330-r5)
(308/347) Installing sbc (2.1-r0)
(309/347) Installing tiff (4.7.1-r0)
(310/347) Installing spandsp (0.0.6-r5)
(311/347) Installing libsrtp (2.7.0-r0)
(312/347) Installing vo-aacenc (0.1.3-r3)
(313/347) Installing vo-amrwbenc (0.1.3-r3)
(314/347) Installing libzbar (0.23.93-r2)
(315/347) Installing gst-plugins-bad (1.28.3-r0)
(316/347) Installing qt6-qtmultimedia-gstreamer (6.11.1-r0)
(317/347) Installing alsa-lib-dev (1.2.15.3-r0)
(318/347) Installing serd-libs (0.32.8-r0)
(319/347) Installing zix-libs (0.8.0-r0)
(320/347) Installing sord-libs (0.16.22-r0)
(321/347) Installing sratom (0.6.20-r0)
(322/347) Installing lilv-libs (0.24.26-r1)
(323/347) Installing libdovi (3.3.2-r0)
(324/347) Installing libplacebo (7.360.1-r0)
(325/347) Installing vidstab (1.1.1-r0)
(326/347) Installing zimg (3.0.6-r0)
(327/347) Installing ffmpeg-libavfilter (8.1.2-r0)
(328/347) Installing v4l-utils-libs (1.32.0-r1)
(329/347) Installing ffmpeg-libavdevice (8.1.2-r0)
(330/347) Installing ffmpeg-dev (8.1.2-r0)
(331/347) Installing gstreamer-dev (1.28.3-r0)
(332/347) Installing orc-compiler (0.4.41-r0)
(333/347) Installing orc-dev (0.4.41-r0)
(334/347) Installing gst-plugins-base-dev (1.28.3-r0)
(335/347) Installing libva-dev (2.23.0-r0)
(336/347) Installing gst-plugins-bad-dev (1.28.3-r0)
(337/347) Installing libva-glx (2.23.0-r0)
(338/347) Installing libva-glx-dev (2.23.0-r0)
(339/347) Installing libxrandr-dev (1.5.5-r0)
(340/347) Installing libpulse-mainloop-glib (17.0-r7)
(341/347) Installing pulseaudio-dev (17.0-r7)
(342/347) Installing qt6-qtbase-private-dev (6.11.1-r0)
(343/347) Installing qt6-qtshadertools (6.11.1-r0)
(344/347) Installing qt6-qtshadertools-dev (6.11.1-r0)
(345/347) Installing qt6-qtsvg-dev (6.11.1-r0)
(346/347) Installing qt6-qtdeclarative-dev (6.11.1-r0)
(347/347) Installing qt6-qtmultimedia-dev (6.11.1-r0)
Executing busybox-1.37.0-r31.trigger
Executing glib-2.88.1-r1.trigger
Executing dbus-1.16.2-r2.trigger
Executing shared-mime-info-2.4-r7.trigger
Executing gdk-pixbuf-2.44.7-r1.trigger
Executing gtk+3.0-3.24.52-r0.trigger
OK: 3254.5 MiB in 663 packages
+ doas apk add --no-interactive make go curl
(1/2) Installing curl (8.21.0-r0)
(2/2) Installing go (1.26.3-r0)
Executing busybox-1.37.0-r31.trigger
OK: 3432.2 MiB in 665 packages
+ doas apk add --no-interactive libxcursor-dev libxrandr-dev libxinerama-dev libxi-dev linux-headers mesa-dev alsa-lib-dev
(1/2) Installing libxcursor-dev (1.2.3-r0)
(2/2) Installing libxinerama-dev (1.1.6-r0)
OK: 3432.2 MiB in 667 packages
+ cmake -B build '-DBUILD_TESTING=ON' '-DBUILD_TESTING_WDYE=ON'
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Git: /usr/bin/git (found version "2.54.0")
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for modules 'libssl;libcrypto'
-- Found libssl, version 3.5.7
-- Found libcrypto, version 3.5.7
-- Performing Test ICONV_ACCEPTS_TRANSLIT
-- Performing Test ICONV_ACCEPTS_TRANSLIT - Failed
-- Found Curses: /usr/lib/libcurses.so
-- Found Ncursesw: ncursesw
-- Checking for modules 'glib-2.0;gio-2.0'
-- Found glib-2.0, version 2.88.1
-- Found gio-2.0, version 2.88.1
-- Checking for module 'unibilium>=0.1.0'
-- Package 'unibilium' not found
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua55;lua5.5;lua-5.5;lua>=5.3'
-- Checking for module 'ncursesw'
-- Found ncursesw, version 6.6.20260516
-- Configuring done (0.9s)
-- Generating done (0.1s)
-- Build files have been written to: /home/ci/xK/build
+ cmake --build build -- package
[ 5%] Building C object CMakeFiles/xB.dir/xB.c.o
In file included from /home/ci/xK/common.c:32,
from /home/ci/xK/xB.c:22:
/home/ci/xK/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 10%] Linking C executable xB
[ 10%] Built target xB
[ 15%] Generating files from the list of server numerics
[ 15%] Built target replies
[ 21%] Building C object termo/CMakeFiles/termo-static.dir/termo.c.o
[ 26%] Building C object termo/CMakeFiles/termo-static.dir/driver-csi.c.o
[ 31%] Building C object termo/CMakeFiles/termo-static.dir/driver-ti.c.o
[ 36%] Linking C static library libtermo-0.a
[ 36%] Built target termo-static
[ 42%] Generating xC relay protocol code
[ 42%] Built target xC-proto
[ 47%] Building C object CMakeFiles/xC.dir/xC.c.o
In file included from /home/ci/xK/common.c:32,
from /home/ci/xK/xC.c:55:
/home/ci/xK/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 52%] Linking C executable xC
[ 52%] Built target xC
[ 57%] Building C object CMakeFiles/xD.dir/xD.c.o
In file included from /home/ci/xK/common.c:32,
from /home/ci/xK/xD.c:23:
/home/ci/xK/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 63%] Linking C executable xD
[ 63%] Built target xD
[ 68%] Building C object CMakeFiles/test-xC.dir/xC.c.o
In file included from /home/ci/xK/common.c:32,
from /home/ci/xK/xC.c:55:
/home/ci/xK/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 73%] Linking C executable test-xC
[ 73%] Built target test-xC
[ 78%] Generating man page for xB
[ 84%] Generating man page for xC
[ 89%] Generating man page for xD
[ 89%] Built target docs
[ 94%] Building C object liberty/tools/wdye/CMakeFiles/wdye.dir/wdye.c.o
In file included from /home/ci/xK/liberty/tools/wdye/wdye.c:20:
/home/ci/xK/liberty/tools/wdye/../../liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[100%] Linking C executable wdye
[100%] Built target wdye
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-2.2.0+26+gbcfbd40-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xK
CPack: - Install project: xK []
CPack: Create package
CPack: - package: /home/ci/xK/build/xK-2.2.0+26+gbcfbd40-Linux-x86_64.zip generated.
+ cmake --build build -- test
Running tests...
gmake[1]: Entering directory '/home/ci/xK/build/termo'
[ 1%] Building C object termo/CMakeFiles/termo.dir/termo.c.o
[ 3%] Building C object termo/CMakeFiles/termo.dir/driver-csi.c.o
[ 5%] Building C object termo/CMakeFiles/termo.dir/driver-ti.c.o
[ 7%] Linking C shared library libtermo-0.so
[ 7%] Built target termo
[ 14%] Built target termo-static
[ 16%] Building C object termo/CMakeFiles/test-01base.dir/tests/01base.c.o
[ 17%] Building C object termo/CMakeFiles/test-01base.dir/tests/taplib.c.o
[ 19%] Linking C executable test-01base
[ 19%] Built target test-01base
[ 21%] Building C object termo/CMakeFiles/test-02getkey.dir/tests/02getkey.c.o
[ 23%] Building C object termo/CMakeFiles/test-02getkey.dir/tests/taplib.c.o
[ 25%] Linking C executable test-02getkey
[ 25%] Built target test-02getkey
[ 26%] Building C object termo/CMakeFiles/test-03utf8.dir/tests/03utf8.c.o
[ 28%] Building C object termo/CMakeFiles/test-03utf8.dir/tests/taplib.c.o
[ 30%] Linking C executable test-03utf8
[ 30%] Built target test-03utf8
[ 32%] Building C object termo/CMakeFiles/test-04flags.dir/tests/04flags.c.o
[ 33%] Building C object termo/CMakeFiles/test-04flags.dir/tests/taplib.c.o
[ 35%] Linking C executable test-04flags
[ 35%] Built target test-04flags
[ 37%] Building C object termo/CMakeFiles/test-05read.dir/tests/05read.c.o
[ 39%] Building C object termo/CMakeFiles/test-05read.dir/tests/taplib.c.o
[ 41%] Linking C executable test-05read
[ 41%] Built target test-05read
[ 42%] Building C object termo/CMakeFiles/test-06buffer.dir/tests/06buffer.c.o
[ 44%] Building C object termo/CMakeFiles/test-06buffer.dir/tests/taplib.c.o
[ 46%] Linking C executable test-06buffer
[ 46%] Built target test-06buffer
[ 48%] Building C object termo/CMakeFiles/test-10keyname.dir/tests/10keyname.c.o
[ 50%] Building C object termo/CMakeFiles/test-10keyname.dir/tests/taplib.c.o
[ 51%] Linking C executable test-10keyname
[ 51%] Built target test-10keyname
[ 53%] Building C object termo/CMakeFiles/test-11strfkey.dir/tests/11strfkey.c.o
[ 55%] Building C object termo/CMakeFiles/test-11strfkey.dir/tests/taplib.c.o
[ 57%] Linking C executable test-11strfkey
[ 57%] Built target test-11strfkey
[ 58%] Building C object termo/CMakeFiles/test-12strpkey.dir/tests/12strpkey.c.o
[ 60%] Building C object termo/CMakeFiles/test-12strpkey.dir/tests/taplib.c.o
[ 62%] Linking C executable test-12strpkey
[ 62%] Built target test-12strpkey
[ 64%] Building C object termo/CMakeFiles/test-13cmpkey.dir/tests/13cmpkey.c.o
[ 66%] Building C object termo/CMakeFiles/test-13cmpkey.dir/tests/taplib.c.o
[ 67%] Linking C executable test-13cmpkey
[ 67%] Built target test-13cmpkey
[ 69%] Building C object termo/CMakeFiles/test-20canon.dir/tests/20canon.c.o
[ 71%] Building C object termo/CMakeFiles/test-20canon.dir/tests/taplib.c.o
[ 73%] Linking C executable test-20canon
[ 73%] Built target test-20canon
[ 75%] Building C object termo/CMakeFiles/test-30mouse.dir/tests/30mouse.c.o
[ 76%] Building C object termo/CMakeFiles/test-30mouse.dir/tests/taplib.c.o
[ 78%] Linking C executable test-30mouse
[ 78%] Built target test-30mouse
[ 80%] Building C object termo/CMakeFiles/test-31position.dir/tests/31position.c.o
[ 82%] Building C object termo/CMakeFiles/test-31position.dir/tests/taplib.c.o
[ 83%] Linking C executable test-31position
[ 83%] Built target test-31position
[ 85%] Building C object termo/CMakeFiles/test-32modereport.dir/tests/32modereport.c.o
[ 87%] Building C object termo/CMakeFiles/test-32modereport.dir/tests/taplib.c.o
[ 89%] Linking C executable test-32modereport
[ 89%] Built target test-32modereport
[ 91%] Building C object termo/CMakeFiles/test-33focus.dir/tests/33focus.c.o
[ 92%] Building C object termo/CMakeFiles/test-33focus.dir/tests/taplib.c.o
[ 94%] Linking C executable test-33focus
[ 94%] Built target test-33focus
[ 96%] Building C object termo/CMakeFiles/test-39csi.dir/tests/39csi.c.o
[ 98%] Building C object termo/CMakeFiles/test-39csi.dir/tests/taplib.c.o
[100%] Linking C executable test-39csi
[100%] Built target test-39csi
gmake[1]: Leaving directory '/home/ci/xK/build/termo'
Test project /home/ci/xK/build
Start 1: test-xC
1/20 Test #1: test-xC .......................... Passed 0.00 sec
Start 2: custom-static-analysis
2/20 Test #2: custom-static-analysis ........... Passed 0.00 sec
Start 3: integration
3/20 Test #3: integration ...................... Passed 0.03 sec
Start 4: termo.01base
4/20 Test #4: termo.01base ..................... Passed 0.00 sec
Start 5: termo.02getkey
5/20 Test #5: termo.02getkey ................... Passed 0.00 sec
Start 6: termo.03utf8
6/20 Test #6: termo.03utf8 ..................... Passed 0.00 sec
Start 7: termo.04flags
7/20 Test #7: termo.04flags .................... Passed 0.00 sec
Start 8: termo.05read
8/20 Test #8: termo.05read ..................... Passed 0.00 sec
Start 9: termo.06buffer
9/20 Test #9: termo.06buffer ................... Passed 0.00 sec
Start 10: termo.10keyname
10/20 Test #10: termo.10keyname .................. Passed 0.00 sec
Start 11: termo.11strfkey
11/20 Test #11: termo.11strfkey .................. Passed 0.00 sec
Start 12: termo.12strpkey
12/20 Test #12: termo.12strpkey .................. Passed 0.00 sec
Start 13: termo.13cmpkey
13/20 Test #13: termo.13cmpkey ................... Passed 0.00 sec
Start 14: termo.20canon
14/20 Test #14: termo.20canon .................... Passed 0.00 sec
Start 15: termo.30mouse
15/20 Test #15: termo.30mouse .................... Passed 0.00 sec
Start 16: termo.31position
16/20 Test #16: termo.31position ................. Passed 0.00 sec
Start 17: termo.32modereport
17/20 Test #17: termo.32modereport ............... Passed 0.00 sec
Start 18: termo.33focus
18/20 Test #18: termo.33focus .................... Passed 0.00 sec
Start 19: termo.39csi
19/20 Test #19: termo.39csi ...................... Passed 0.00 sec
Start 20: wdye
20/20 Test #20: wdye ............................. Passed 0.50 sec
100% tests passed, 0 tests failed out of 20
Total Test time (real) = 0.56 sec
+ toolchain=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x86.cmake
+ cmake -B build-xW-x86 -S xW '-DCMAKE_TOOLCHAIN_FILE=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x86.cmake'
-- The CXX compiler identification is GNU 15.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/i686-w64-mingw32-g++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Configuring done (0.2s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build-xW-x86
+ cmake --build build-xW-x86 -- package
[ 6%] Generating xC relay protocol code
[ 6%] Built target xC-proto
[ 12%] Generating xW 256x256 application icon
[ 18%] Generating xW 16x16 application icon
[ 25%] Generating xW 32x32 application icon
[ 31%] Generating xW 48x48 application icon
[ 37%] Generating Windows program icon
[ 43%] Generating a beep sample
[ 50%] Generating xW-highlighted 16x16 application icon
[ 56%] Generating xW-highlighted 256x256 application icon
[ 62%] Generating xW-highlighted 32x32 application icon
[ 68%] Generating xW-highlighted 48x48 application icon
[ 75%] Generating Windows program icon
[ 81%] Building CXX object CMakeFiles/xW.dir/xW.cpp.obj
[ 87%] Building RC object CMakeFiles/xW.dir/xW.rc.res
[ 93%] Building CXX object CMakeFiles/xW.dir/home/ci/xK/liberty/tools/lxdrgen-cpp-win32.cpp.obj
[100%] Linking CXX executable xW.exe
[100%] Built target xW
Run CPack packaging tool...
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xW
CPack: - Install project: xW []
CPack: Create package
CPack: - package: /home/ci/xK/build-xW-x86/xW-2.2.0-win32.zip generated.
+ toolchain=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x64.cmake
+ cmake -B build-xW-x64 -S xW '-DCMAKE_TOOLCHAIN_FILE=/home/ci/xK/liberty/cmake/toolchains/MinGW-w64-x64.cmake'
-- The CXX compiler identification is GNU 15.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/x86_64-w64-mingw32-g++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Configuring done (0.2s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build-xW-x64
+ cmake --build build-xW-x64 -- package
[ 6%] Generating xC relay protocol code
[ 6%] Built target xC-proto
[ 12%] Generating xW 256x256 application icon
[ 18%] Generating xW 16x16 application icon
[ 25%] Generating xW 32x32 application icon
[ 31%] Generating xW 48x48 application icon
[ 37%] Generating Windows program icon
[ 43%] Generating a beep sample
[ 50%] Generating xW-highlighted 16x16 application icon
[ 56%] Generating xW-highlighted 256x256 application icon
[ 62%] Generating xW-highlighted 32x32 application icon
[ 68%] Generating xW-highlighted 48x48 application icon
[ 75%] Generating Windows program icon
[ 81%] Building CXX object CMakeFiles/xW.dir/xW.cpp.obj
[ 87%] Building RC object CMakeFiles/xW.dir/xW.rc.res
[ 93%] Building CXX object CMakeFiles/xW.dir/home/ci/xK/liberty/tools/lxdrgen-cpp-win32.cpp.obj
[100%] Linking CXX executable xW.exe
[100%] Built target xW
Run CPack packaging tool...
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xW
CPack: - Install project: xW []
CPack: Create package
CPack: - package: /home/ci/xK/build-xW-x64/xW-2.2.0-win64.zip generated.
+ cmake -B build-xT -S xT
-- The CXX compiler identification is GNU 15.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Performing Test HAVE_STDATOMIC
-- Performing Test HAVE_STDATOMIC - Success
-- Found WrapAtomic: TRUE
-- Found OpenGL: /usr/lib/libGL.so
-- Found WrapOpenGL: TRUE
-- Found WrapVulkanHeaders: /usr/include
-- Configuring done (0.7s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/xK/build-xT
+ cmake --build build-xT -- package
[ 6%] Generating xT 16x16 application icon
[ 13%] Generating xT 32x32 application icon
[ 20%] Generating xT 48x48 application icon
[ 26%] Generating xT 256x256 application icon
[ 26%] Built target icons
[ 33%] Generating xC relay protocol code
[ 33%] Built target xC-proto
[ 33%] Built target xT_autogen_timestamp_deps
[ 40%] Automatic MOC and UIC for target xT
[ 40%] Built target xT_autogen
[ 46%] Generating xT 48x48 application icon
[ 53%] Generating a beep sample
[ 60%] Generating xT-highlighted 48x48 application icon
[ 66%] Running rcc for resource rsrc
[ 73%] Building CXX object CMakeFiles/xT.dir/xT_autogen/mocs_compilation.cpp.o
[ 80%] Building CXX object CMakeFiles/xT.dir/xT.cpp.o
[ 86%] Building CXX object CMakeFiles/xT.dir/home/ci/xK/liberty/tools/lxdrgen-cpp-qt.cpp.o
[ 93%] Building CXX object CMakeFiles/xT.dir/.qt/rcc/qrc_rsrc.cpp.o
[100%] Linking CXX executable xT
[100%] Built target xT
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: xT
CPack: - Install project: xT []
CPack: Create package
CPack: - package: /home/ci/xK/build-xT/xT-2.2.0-26-gbcfbd40-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: xT
CPack: - Install project: xT []
CPack: Create package
CPack: - package: /home/ci/xK/build-xT/xT-2.2.0-26-gbcfbd40-Linux-x86_64.zip generated.
+ make -C xN all test
make: Entering directory '/home/ci/xK/xN'
ln -sf ../xS/irc.go irc.go
go build -ldflags "-X 'main.projectVersion=$(cat ../xK-version)'" -o xN
env "asciidoc-release-version=$(cat ../xK-version)" \
env LC_ALL=C awk -f ../liberty/tools/asciiman.awk xN.adoc > xN.1
go test
PASS
ok janouch.name/xK/xN 0.002s
make: Leaving directory '/home/ci/xK/xN'
+ make -C xS all test
make: Entering directory '/home/ci/xK/xS'
env LC_ALL=C awk -f xS-gen-replies.awk xS-replies > xS-replies.go
go build -ldflags "-X 'main.projectVersion=$(cat ../xK-version)'" -o xS
env "asciidoc-release-version=$(cat ../xK-version)" \
env LC_ALL=C awk -f ../liberty/tools/asciiman.awk xS.adoc > xS.1
go test
PASS
ok janouch.name/xK/xS 0.003s
make: Leaving directory '/home/ci/xK/xS'
+ make -C xP
make: Entering directory '/home/ci/xK/xP'
env LC_ALL=C awk -f ../liberty/tools/lxdrgen.awk -f ../liberty/tools/lxdrgen-go.awk \
-v PrefixCamel=Relay ../xC.lxdr > proto.go
env LC_ALL=C awk -f ../liberty/tools/lxdrgen.awk -f ../liberty/tools/lxdrgen-mjs.awk ../xC.lxdr > public/proto.js
curl -Lo public/mithril.js https://unpkg.com/mithril/mithril.js
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 40 100 40 0 0 129 0 0
100 67767 100 67767 0 0 213.2k 0 0
go build -o xP
go: downloading nhooyr.io/websocket v1.8.17
make: Leaving directory '/home/ci/xK/xP'
+ cd xA
+ seq 1 5
+ go get
go: downloading fyne.io/fyne/v2 v2.8.0
go: downloading github.com/ebitengine/oto/v3 v3.4.0
go: downloading github.com/fsnotify/fsnotify v1.10.1
go: downloading github.com/godbus/dbus/v5 v5.2.2
go: downloading github.com/rymdport/portal v0.4.2
go: downloading github.com/go-text/typesetting v0.3.4
go: downloading github.com/mattn/go-runewidth v0.0.24
go: downloading github.com/yuin/goldmark v1.8.4
go: downloading golang.org/x/image v0.44.0
go: downloading github.com/FyshOS/fancyfs v0.0.1
go: downloading golang.org/x/sys v0.47.0
go: downloading github.com/fyne-io/gl-js v0.2.1-0.20260315212741-029c47fd27e8
go: downloading github.com/fyne-io/oksvg v0.2.0
go: downloading github.com/srwiley/rasterx v0.0.0-20220730225603-2ab79fcdd4ef
go: downloading github.com/nfnt/resize v0.0.0-20180221191011-83c6a9932646
go: downloading github.com/BurntSushi/toml v1.6.0
go: downloading fyne.io/systray v1.12.2
go: downloading github.com/fyne-io/glfw-js v0.4.0
go: downloading github.com/fyne-io/image v0.1.1
go: downloading github.com/go-gl/glfw/v3.4/glfw v0.1.0-pre.1.0.20260707082822-2a407d02d01a
go: downloading github.com/anthonynsimon/bild v0.16.1
go: downloading github.com/hack-pad/go-indexeddb v0.3.2
go: downloading github.com/fredbi/uri v1.1.1
go: downloading github.com/stretchr/testify v1.11.1
go: downloading github.com/ebitengine/purego v0.10.1
go: downloading github.com/go-text/render v0.2.1
go: downloading github.com/jeandeaual/go-locale v0.0.0-20250612000132-0ef82f21eade
go: downloading github.com/nicksnyder/go-i18n/v2 v2.6.1
go: downloading golang.org/x/text v0.40.0
go: downloading github.com/clipperhouse/uax29/v2 v2.7.0
go: downloading github.com/go-gl/gl v0.0.0-20260331235117-4566fea9a276
go: downloading golang.org/x/net v0.57.0
go: downloading github.com/jsummers/gobmp v0.0.0-20230614200233-a9de23ed2e25
go: downloading github.com/hack-pad/safejs v0.1.1
go: downloading github.com/davecgh/go-spew v1.1.1
go: downloading github.com/pmezard/go-difflib v1.0.0
go: downloading github.com/srwiley/oksvg v0.0.0-20221011165216-be6e8873101c
go: downloading gopkg.in/yaml.v3 v3.0.1
+ break
+ make -C xA
make: Entering directory '/home/ci/xK/xA'
printf "\
[Details]\n\
Icon = 'xA.png'\n\
Name = 'xA'\n\
ID = 'name.janouch.xA'\n\
Version = '$(cat ../xK-version)'\n\
Build = 1\n\
\n\
[Migrations]\n\
# This is temporary, for Fyne 2.8\n\
fyneDo = true\n\
\n\
[LinuxAndBSD]\n\
GenericName = 'IRC Client'\n\
Categories = ['Network', 'Chat', 'IRCClient']\n" > FyneApp.toml
rsvg-convert --output=xA.png -- xA.svg
rsvg-convert --output=xA-highlighted.png -- xA-highlighted.svg
sox -Dr 44100 -c 1 -e signed-integer -b 16 -L -n beep.raw \
synth 0.1 0 25 triangle 800 vol 0.5 fade t 0 -0 0.005 pad 0 0.05
env LC_ALL=C awk -f ../liberty/tools/lxdrgen.awk -f ../liberty/tools/lxdrgen-go.awk \
-v PrefixCamel=Relay ../xC.lxdr > proto.go
go build -ldflags "-X 'main.projectVersion=$(cat ../xK-version)'" -o xA \
-gcflags=all="-N -l"
make: Leaving directory '/home/ci/xK/xA'
+ mv build-xW-x64/xW-2.2.0-win64.zip build-xW-x86/xW-2.2.0-win32.zip /home/ci/acid-deploy
Deploy log
+ mv -- xW-2.2.0-win32.zip xW-2.2.0-win64.zip /home/acid/cd