- Created
- 24d ago
- Changed
- 24d ago
- Project
- p/hex
- Commit
- dec1df2024f207d4ffd7935a0f268594cd26358b
- Runner
- Alpine 3.24
- State
- Success
- Notified
- 1
- Duration
- 47s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.35-0-virt (buildozer@build-3-24-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-06-09 12:34:47
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000018] kvm-clock: using sched offset of 10856473383 cycles
[ 0.000019] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000022] tsc: Detected 3096.006 MHz processor
[ 0.000497] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000523] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000525] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000560] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007153] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007351] RAMDISK: [mem 0x7f5a7000-0x7fffffff]
[ 0.007353] ACPI: Early table checksum verification disabled
[ 0.007355] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007358] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007362] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007366] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007369] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007371] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007374] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007376] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007378] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007379] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007379] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007380] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007380] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007381] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.007791] No NUMA configuration found
[ 0.007792] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.007794] NODE_DATA(0) allocated [mem 0x13fff8d40-0x13fffcfff]
[ 0.007818] Zone ranges:
[ 0.007818] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007819] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007821] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007822] Movable zone start for each node
[ 0.007822] Early memory node ranges
[ 0.007822] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.007823] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.007824] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007825] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.007909] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007921] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013357] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.014002] ACPI: PM-Timer IO Port: 0x608
[ 0.014016] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.014048] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.014051] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014052] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.014053] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014054] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.014055] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.014058] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.014059] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014066] CPU topo: Max. logical packages: 1
[ 0.014066] CPU topo: Max. logical dies: 1
[ 0.014067] CPU topo: Max. dies per package: 1
[ 0.014070] CPU topo: Max. threads per core: 1
[ 0.014070] CPU topo: Num. cores per package: 4
[ 0.014071] CPU topo: Num. threads per package: 4
[ 0.014071] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.014085] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.014097] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.014098] Booting paravirtualized kernel on KVM
[ 0.014099] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.017696] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.017890] percpu: Embedded 55 pages/cpu s185752 r8192 d31336 u524288
[ 0.017913] kvm-guest: PV spinlocks disabled, no host support
[ 0.017914] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.017955] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4,ena,gve,mana", will be passed to user space.
[ 0.017958] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.018282] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.018445] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.018511] software IO TLB: area num 4.
[ 0.029367] Fallback order for Node 0: 0
[ 0.029371] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.029372] Policy zone: Normal
[ 0.029565] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.041485] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.041548] Kernel/User page tables isolation: enabled
[ 0.042251] Dynamic Preempt: none
[ 0.042398] rcu: Preemptible hierarchical RCU implementation.
[ 0.042399] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.042400] Trampoline variant of Tasks RCU enabled.
[ 0.042400] Tracing variant of Tasks RCU enabled.
[ 0.042401] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.042401] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.042407] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.042409] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.046443] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.046641] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.046950] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.053667] Console: colour VGA+ 80x25
[ 0.053669] printk: legacy console [tty0] enabled
[ 0.090451] printk: legacy console [ttyS0] enabled
[ 0.241234] ACPI: Core revision 20250807
[ 0.242495] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.244882] APIC: Switch to symmetric I/O mode setup
[ 0.246399] x2apic enabled
[ 0.247463] APIC: Switched APIC routing to: physical x2apic
[ 0.249898] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.251428] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.254130] Calibrating delay loop (skipped) preset value.. 6192.01 BogoMIPS (lpj=3096006)
[ 0.255209] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.256130] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.258133] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.259131] Speculative Store Bypass: Vulnerable
[ 0.260131] Spectre V2 : Mitigation: Retpolines
[ 0.261130] ITS: Mitigation: Aligned branch/return thunks
[ 0.262130] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.264130] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.265130] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.267131] active return thunk: its_return_thunk
[ 0.269131] x86/fpu: x87 FPU will use FXSAVE
[ 0.284836] Freeing SMP alternatives memory: 40K
[ 0.285134] pid_max: default: 32768 minimum: 301
[ 0.287400] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.288543] landlock: Up and running.
[ 0.289130] Yama: becoming mindful.
[ 0.290248] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.292133] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.396666] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.397299] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.399154] signal: max sigframe size: 1440
[ 0.400158] rcu: Hierarchical SRCU implementation.
[ 0.401130] rcu: Max phase no-delay instances is 400.
[ 0.402171] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.406122] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.407175] smp: Bringing up secondary CPUs ...
[ 0.408215] smpboot: x86: Booting SMP configuration:
[ 0.410130] .... node #0, CPUs: #1 #2 #3
[ 0.414211] smp: Brought up 1 node, 4 CPUs
[ 0.417018] smpboot: Total of 4 processors activated (24768.04 BogoMIPS)
[ 0.419183] Memory: 3999448K/4193760K available (14650K kernel code, 2032K rwdata, 9844K rodata, 2996K init, 1168K bss, 189428K reserved, 0K cma-reserved)
[ 0.421265] devtmpfs: initialized
[ 0.422165] x86/mm: Memory block size: 128MB
[ 0.424200] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.425136] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.426137] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.428571] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.429206] audit: initializing netlink subsys (disabled)
[ 0.430145] audit: type=2000 audit(1785455096.934:1): state=initialized audit_enabled=0 res=1
[ 0.431200] thermal_sys: Registered thermal governor 'step_wise'
[ 0.432139] cpuidle: using governor ladder
[ 0.434134] cpuidle: using governor menu
[ 0.436175] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.438203] PCI: Using configuration type 1 for base access
[ 0.439204] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.441166] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.443130] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.444329] ACPI: Added _OSI(Module Device)
[ 0.446131] ACPI: Added _OSI(Processor Device)
[ 0.447131] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.449476] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.450337] ACPI: Interpreter enabled
[ 0.451138] ACPI: PM: (supports S0 S3 S5)
[ 0.452977] ACPI: Using IOAPIC for interrupt routing
[ 0.454141] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.455130] PCI: Using E820 reservations for host bridge windows
[ 0.456200] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.459623] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.461134] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.463132] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.466137] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.469428] acpiphp: Slot [3] registered
[ 0.471152] acpiphp: Slot [4] registered
[ 0.472150] acpiphp: Slot [5] registered
[ 0.473150] acpiphp: Slot [6] registered
[ 0.475151] acpiphp: Slot [7] registered
[ 0.476150] acpiphp: Slot [8] registered
[ 0.477150] acpiphp: Slot [9] registered
[ 0.478153] acpiphp: Slot [10] registered
[ 0.480151] acpiphp: Slot [11] registered
[ 0.481150] acpiphp: Slot [12] registered
[ 0.482151] acpiphp: Slot [13] registered
[ 0.483060] acpiphp: Slot [14] registered
[ 0.485004] acpiphp: Slot [15] registered
[ 0.486150] acpiphp: Slot [16] registered
[ 0.487152] acpiphp: Slot [17] registered
[ 0.488151] acpiphp: Slot [18] registered
[ 0.489150] acpiphp: Slot [19] registered
[ 0.491151] acpiphp: Slot [20] registered
[ 0.492150] acpiphp: Slot [21] registered
[ 0.493150] acpiphp: Slot [22] registered
[ 0.494150] acpiphp: Slot [23] registered
[ 0.496151] acpiphp: Slot [24] registered
[ 0.497153] acpiphp: Slot [25] registered
[ 0.498153] acpiphp: Slot [26] registered
[ 0.499059] acpiphp: Slot [27] registered
[ 0.501019] acpiphp: Slot [28] registered
[ 0.502150] acpiphp: Slot [29] registered
[ 0.503167] acpiphp: Slot [30] registered
[ 0.504167] acpiphp: Slot [31] registered
[ 0.505147] PCI host bridge to bus 0000:00
[ 0.507133] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.509131] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.510131] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.513131] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.515131] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.517131] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.518191] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.521665] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.524568] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.528131] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.530192] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.532131] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.533131] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.535131] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.537303] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.540738] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.542144] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.544499] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.556173] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.558158] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.560180] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.562279] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.564696] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.568870] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.571145] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.573180] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.575144] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.578131] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.582145] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.584145] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.585183] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.588794] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.594144] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.596163] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.597181] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.603102] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.605247] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.607271] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.609296] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.611196] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.612546] iommu: Default domain type: Translated
[ 0.614131] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.616295] SCSI subsystem initialized
[ 0.617226] pps_core: LinuxPPS API ver. 1 registered
[ 0.619130] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.621136] PTP clock support registered
[ 0.622341] PCI: Using ACPI for IRQ routing
[ 0.624361] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.626193] clocksource: Switched to clocksource kvm-clock
[ 0.628887] VFS: Disk quotas dquot_6.6.0
[ 0.630001] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.631965] pnp: PnP ACPI init
[ 0.633271] pnp: PnP ACPI: found 6 devices
[ 0.641527] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.644259] NET: Registered PF_INET protocol family
[ 0.645773] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.656193] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.658699] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.660903] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.663277] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.665607] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.667553] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.669599] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.671409] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.673463] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.675011] NET: Registered PF_XDP protocol family
[ 0.676368] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.677988] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.679637] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.681453] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.683277] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.685155] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.686726] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.688515] PCI: CLS 0 bytes, default 64
[ 0.689765] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.689865] Unpacking initramfs...
[ 0.690150] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.695071] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.698013] Initialise system trusted keyrings
[ 0.699452] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.707266] Key type asymmetric registered
[ 0.708735] Asymmetric key parser 'x509' registered
[ 0.710452] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.713242] io scheduler mq-deadline registered
[ 0.714924] io scheduler kyber registered
[ 0.716507] io scheduler bfq registered
[ 0.719295] ERST DBG: ERST support is disabled.
[ 0.721452] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.725600] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.729566] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.732702] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.734796] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.737878] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.740119] scsi host0: ata_piix
[ 0.741268] scsi host1: ata_piix
[ 0.742254] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.744362] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.746765] hv_vmbus: registering driver hv_netvsc
[ 0.748381] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.751464] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.752883] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.754330] hv_vmbus: registering driver hyperv_keyboard
[ 0.755865] rtc_cmos 00:05: RTC can wake from S4
[ 0.757879] rtc_cmos 00:05: registered as rtc0
[ 0.759287] rtc_cmos 00:05: setting system clock to 2026-07-30T23:44:56 UTC (1785455096)
[ 0.761626] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.763740] intel_pstate: CPU model not supported
[ 0.765304] gre: GRE over IPv4 demultiplexer driver
[ 0.766797] NET: Registered PF_INET6 protocol family
[ 0.768653] Segment Routing with IPv6
[ 0.768941] Freeing initrd memory: 10596K
[ 0.769774] In-situ OAM (IOAM) with IPv6
[ 0.772406] Key type dns_resolver registered
[ 0.773721] IPI shorthand broadcast: enabled
[ 0.776218] sched_clock: Marking stable (574006194, 201480642)->(808169003, -32682167)
[ 0.778801] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.778930] registered taskstats version 1
[ 0.782751] Loading compiled-in X.509 certificates
[ 0.787819] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.792172] Demotion targets for Node 0: null
[ 0.793754] Key type .fscrypt registered
[ 0.794929] Key type fscrypt-provisioning registered
[ 0.905447] ata2: found unknown device (class 0)
[ 0.913519] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.923845] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.950697] Freeing unused kernel image (initmem) memory: 2996K
[ 0.958203] Write protecting the kernel read-only data: 26624k
[ 0.969417] Freeing unused kernel image (text/rodata gap) memory: 1732K
[ 0.977372] Freeing unused kernel image (rodata/data gap) memory: 396K
[ 0.984289] rodata_test: all tests were successful
[ 0.989652] Run /init as init process
[ 1.013191] Alpine Init 3.14.0-r0
[ 1.017364] Loading boot drivers...
[ 1.049766] ACPI: bus type USB registered
[ 1.051301] usbcore: registered new interface driver usbfs
[ 1.053171] usbcore: registered new interface driver hub
[ 1.054853] usbcore: registered new device driver usb
[ 1.059560] usbcore: registered new interface driver usb-storage
[ 1.122428] loop: module loaded
[ 1.151219] ACPI: bus type drm_connector registered
[ 1.172313] Loading boot drivers: ok.
[ 1.174936] Mounting root...
[ 1.194651] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.197042] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.202361] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.203795] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.205818] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.219641] Console: switching to colour frame buffer device 160x50
[ 1.222118] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.255421] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.282196] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.319848] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.329406] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.334922] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.340746] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.392051] block sr0: the capability attribute has been deprecated.
[ 1.935279] EXT4-fs (vda): mounted filesystem 7af5430b-f94c-484c-8fe6-36878b6de03a ro with ordered data mode. Quota mode: none.
[ 1.945319] Mounting root: ok.
[ 2.496542] random: crng init done
Welcome to Alpine Linux 3.24
Kernel 6.18.35-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.6-r0 -> 3.0.7-r0)
(2/2) Upgrading apk-tools (3.0.6-r0 -> 3.0.7-r0)
Executing busybox-1.37.0-r31.trigger
Continuing with the main upgrade transaction:
( 1/17) Upgrading libblkid (2.42-r0 -> 2.42.1-r0)
( 2/17) Upgrading blkid (2.42-r0 -> 2.42.1-r0)
( 3/17) Upgrading libsmartcols (2.42-r0 -> 2.42.1-r0)
( 4/17) Upgrading partx (2.42-r0 -> 2.42.1-r0)
( 5/17) Upgrading libuuid (2.42-r0 -> 2.42.1-r0)
( 6/17) Upgrading libfdisk (2.42-r0 -> 2.42.1-r0)
( 7/17) Upgrading sfdisk (2.42-r0 -> 2.42.1-r0)
( 8/17) Upgrading libexpat (2.8.1-r0 -> 2.8.2-r0)
( 9/17) Upgrading py3-charset-normalizer (3.4.7-r0 -> 3.4.9-r0)
(10/17) Upgrading py3-charset-normalizer-pyc (3.4.7-r0 -> 3.4.9-r0)
(11/17) Upgrading tzdata (2026b-r0 -> 2026c-r0)
(12/17) Upgrading device-mapper-libs (2.03.35-r2 -> 2.03.35-r3)
(13/17) Upgrading linux-virt (6.18.35-r0 -> 6.18.40-r0)
(14/17) Upgrading libmount (2.42-r0 -> 2.42.1-r0)
(15/17) Upgrading mount (2.42-r0 -> 2.42.1-r0)
(16/17) Upgrading libnvmemi (1.16.1-r1 -> 1.16.2-r0)
(17/17) Upgrading libnvme (1.16.1-r1 -> 1.16.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.14.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.40-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 131.3 MiB in 201 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/12) Installing brotli-libs (1.2.0-r1)
( 2/12) Installing c-ares (1.34.8-r0)
( 3/12) Installing libunistring (1.4.2-r0)
( 4/12) Installing libidn2 (2.3.8-r0)
( 5/12) Installing nghttp2-libs (1.69.0-r0)
( 6/12) Installing libpsl (0.21.5-r3)
( 7/12) Installing libcurl (8.21.0-r0)
( 8/12) Installing pcre2 (10.47-r1)
( 9/12) Installing git (2.54.0-r0)
(10/12) Installing git-init-template (2.54.0-r0)
(11/12) Installing gnu-libiconv-libs (1.18-r0)
(12/12) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r31.trigger
OK: 143.9 MiB in 213 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/hex.git hex
Cloning into 'hex'...
remote: Enumerating objects: 420, done.
remote: Counting objects: 100% (107/107), done.
remote: Compressing objects: 100% (107/107), done.
remote: Total 420 (delta 58), reused 0 (delta 0), pack-reused 313 (from 1)
Receiving objects: 100% (420/420), 221.92 KiB | 17.07 MiB/s, done.
Resolving deltas: 100% (248/248), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Submodule 'termo' (https://git.janouch.name/p/termo.git) registered for path 'termo'
Cloning into '/home/ci/hex/liberty'...
remote: Enumerating objects: 936, done.
remote: Counting objects: 100% (405/405), done.
remote: Compressing objects: 100% (402/402), done.
remote: Total 936 (delta 258), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (936/936), 456.39 KiB | 19.84 MiB/s, done.
Resolving deltas: 100% (579/579), done.
Cloning into '/home/ci/hex/termo'...
remote: Enumerating objects: 1982, done.
remote: Counting objects: 100% (43/43), done.
remote: Compressing objects: 100% (42/42), done.
remote: Total 1982 (delta 15), reused 0 (delta 0), pack-reused 1939 (from 1)
Receiving objects: 100% (1982/1982), 1.39 MiB | 25.05 MiB/s, done.
Resolving deltas: 100% (1260/1260), done.
Submodule path 'liberty': checked out '12063aecde1dcb45a9109629edff489a6e988efb'
Submodule path 'termo': checked out 'a8f3f6eca3fec9e7faf85d97201a567d73636662'
+ cd hex
+ git -c 'advice.detachedHead=false' checkout dec1df2024f207d4ffd7935a0f268594cd26358b
HEAD is now at dec1df2 Bump liberty
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=dec1df2
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/dec1df2/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake asciidoctor rsvg-convert libunistring-dev ncurses-dev lua5.4-dev libx11-dev libxft-dev libpng-dev
( 1/78) Installing gmp (6.3.0-r4)
( 2/78) Installing ruby-libs (3.4.9-r0)
( 3/78) Installing libucontext (1.5.1-r0)
( 4/78) Installing ruby (3.4.9-r0)
( 5/78) Installing asciidoctor (2.0.26-r0)
( 6/78) Installing jansson (2.15.0-r0)
( 7/78) Installing binutils (2.45.1-r1)
( 8/78) Installing libmagic (5.47-r2)
( 9/78) Installing file (5.47-r2)
(10/78) Installing libgcc-static (15.2.0-r5)
(11/78) Installing libgomp (15.2.0-r5)
(12/78) Installing libatomic (15.2.0-r5)
(13/78) Installing isl26 (0.26-r2)
(14/78) Installing mpfr4 (4.2.2-r0)
(15/78) Installing mpc1 (1.3.1-r1)
(16/78) Installing gcc (15.2.0-r5)
(17/78) Installing libstdc++-dev (15.2.0-r5)
(18/78) Installing musl-dev (1.2.6-r2)
(19/78) Installing g++ (15.2.0-r5)
(20/78) Installing make (4.4.1-r4)
(21/78) Installing fortify-headers (3.0.1-r2)
(22/78) Installing patch (2.8-r0)
(23/78) Installing build-base (0.5-r4)
(24/78) Installing acl-libs (2.3.2-r1)
(25/78) Installing lz4-libs (1.10.0-r1)
(26/78) Installing libarchive (3.8.7-r0)
(27/78) Installing rhash-libs (1.4.6-r0)
(28/78) Installing libuv (1.52.1-r0)
(29/78) Installing cmake (4.2.3-r0)
(30/78) Installing libpng (1.6.58-r1)
(31/78) Installing pkgconf (2.5.1-r0)
(32/78) Installing zlib-dev (1.3.2-r0)
(33/78) Installing libpng-dev (1.6.58-r1)
(34/78) Installing libunistring-dev (1.4.2-r0)
(35/78) Installing libxau (1.0.12-r0)
(36/78) Installing xorgproto (2025.1-r0)
(37/78) Installing libxau-dev (1.0.12-r0)
(38/78) Installing xcb-proto (1.17.0-r1)
(39/78) Installing xcb-proto-pyc (1.17.0-r1)
(40/78) Installing libxdmcp (1.1.5-r1)
(41/78) Installing libxcb (1.17.0-r2)
(42/78) Installing libxdmcp-dev (1.1.5-r1)
(43/78) Installing libxcb-dev (1.17.0-r2)
(44/78) Installing xtrans (1.6.0-r0)
(45/78) Installing libx11 (1.8.13-r0)
(46/78) Installing libx11-dev (1.8.13-r0)
(47/78) Installing libxrender (0.9.12-r0)
(48/78) Installing freetype (2.14.3-r0)
(49/78) Installing fontconfig (2.17.1-r1)
(50/78) Installing libxft (2.3.9-r0)
(51/78) Installing expat (2.8.2-r0)
(52/78) Installing expat-dev (2.8.2-r0)
(53/78) Installing bzip2-dev (1.0.8-r6)
(54/78) Installing brotli (1.2.0-r1)
(55/78) Installing brotli-dev (1.2.0-r1)
(56/78) Installing freetype-dev (2.14.3-r0)
(57/78) Installing fontconfig-dev (2.17.1-r1)
(58/78) Installing libxrender-dev (0.9.12-r0)
(59/78) Installing libxft-dev (2.3.9-r0)
(60/78) Installing lua5.4-libs (5.4.8-r0)
(61/78) Installing lua5.4 (5.4.8-r0)
(62/78) Installing lua5.4-dev (5.4.8-r0)
(63/78) Installing libformw (6.6_p20260516-r0)
(64/78) Installing libmenuw (6.6_p20260516-r0)
(65/78) Installing libncurses++ (6.6_p20260516-r0)
(66/78) Installing ncurses-dev (6.6_p20260516-r0)
(67/78) Installing libxext (1.3.7-r0)
(68/78) Installing pixman (0.46.4-r0)
(69/78) Installing cairo (1.18.4-r1)
(70/78) Installing libdav1d (1.5.3-r0)
(71/78) Installing libintl (1.0-r0)
(72/78) Installing glib (2.88.1-r1)
(73/78) Installing graphite2 (1.3.14-r6)
(74/78) Installing harfbuzz (13.2.1-r0)
(75/78) Installing fribidi (1.0.16-r3)
(76/78) Installing pango (1.57.1-r0)
(77/78) Installing libxml2 (2.13.9-r2)
(78/78) Installing rsvg-convert (2.62.3-r0)
Executing busybox-1.37.0-r31.trigger
Executing glib-2.88.1-r1.trigger
OK: 515.1 MiB in 291 packages
+ cmake -B build
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Found Ncursesw: ncursesw
-- Found Unistring: /usr/include
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found Curses: /usr/lib/libcurses.so
-- Checking for modules 'glib-2.0;gio-2.0'
-- Package 'glib-2.0' not found
-- Package 'gio-2.0' not found
-- Checking for module 'unibilium>=0.1.0'
-- Package 'unibilium' not found
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Checking for modules 'x11;xrender;xft;fontconfig;libpng'
-- Found x11, version 1.8.13
-- Found xrender, version 0.9.12
-- Found xft, version 2.3.9
-- Found fontconfig, version 2.17.1
-- Found libpng, version 1.6.58
-- Looking for resizeterm
-- Looking for resizeterm - found
-- Configuring done (0.7s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/hex/build
+ cmake --build build -- package
[ 10%] Building C object termo/CMakeFiles/termo-static.dir/termo.c.o
[ 20%] Building C object termo/CMakeFiles/termo-static.dir/driver-csi.c.o
[ 30%] Building C object termo/CMakeFiles/termo-static.dir/driver-ti.c.o
[ 40%] Linking C static library libtermo-0.a
[ 40%] Built target termo-static
[ 50%] Building C object CMakeFiles/hex.dir/hex.c.o
In file included from /home/ci/hex/hex.c:59:
/home/ci/hex/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 60%] Linking C executable hex
[ 60%] Built target hex
[ 70%] Generating hex 16x16 application icon
[ 80%] Generating hex 32x32 application icon
[ 90%] Generating hex 48x48 application icon
[ 90%] Built target icons
[100%] Generating man page for hex
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: hex
CPack: - Install project: hex []
CPack: Create package
CPack: - package: /home/ci/hex/build/hex-dec1df2-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: hex
CPack: - Install project: hex []
CPack: Create package
CPack: - package: /home/ci/hex/build/hex-dec1df2-Linux-x86_64.zip generated.
Deploy log