- Created
- 22d ago
- Changed
- 22d ago
- Project
- p/asciicast2webp
- Commit
- 5c56c50fcdf286f966e22dcf63d43a602386356a
- Runner
- Alpine 3.24
- State
- Success
- Notified
- 1
- Duration
- 1m22s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.35-0-virt (buildozer@build-3-24-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-06-09 12:34:47
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 10882472748 cycles
[ 0.000019] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000022] tsc: Detected 3096.006 MHz processor
[ 0.000565] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000591] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000593] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000627] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007369] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007460] RAMDISK: [mem 0x7f5a7000-0x7fffffff]
[ 0.007461] ACPI: Early table checksum verification disabled
[ 0.007464] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007467] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007471] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007475] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007478] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007480] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007482] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007485] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007487] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007488] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007488] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007489] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007489] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007490] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.007914] No NUMA configuration found
[ 0.007915] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.007917] NODE_DATA(0) allocated [mem 0x13fffbd40-0x13fffffff]
[ 0.008041] Zone ranges:
[ 0.008042] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008043] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008044] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008045] Movable zone start for each node
[ 0.008045] Early memory node ranges
[ 0.008046] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.008047] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.008048] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008049] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.008134] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.008146] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013641] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.014346] ACPI: PM-Timer IO Port: 0x608
[ 0.014364] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.014397] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.014399] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014401] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.014401] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014402] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.014403] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.014406] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.014407] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014415] CPU topo: Max. logical packages: 1
[ 0.014415] CPU topo: Max. logical dies: 1
[ 0.014416] CPU topo: Max. dies per package: 1
[ 0.014419] CPU topo: Max. threads per core: 1
[ 0.014420] CPU topo: Num. cores per package: 4
[ 0.014420] CPU topo: Num. threads per package: 4
[ 0.014420] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.014435] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.014446] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.014447] Booting paravirtualized kernel on KVM
[ 0.014448] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.018309] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.018538] percpu: Embedded 55 pages/cpu s185752 r8192 d31336 u524288
[ 0.018562] kvm-guest: PV spinlocks disabled, no host support
[ 0.018563] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.018623] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4,ena,gve,mana", will be passed to user space.
[ 0.018627] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.018963] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.019125] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.019191] software IO TLB: area num 4.
[ 0.030479] Fallback order for Node 0: 0
[ 0.030483] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.030484] Policy zone: Normal
[ 0.030678] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.042623] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.042685] Kernel/User page tables isolation: enabled
[ 0.043387] Dynamic Preempt: none
[ 0.043533] rcu: Preemptible hierarchical RCU implementation.
[ 0.043533] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.043535] Trampoline variant of Tasks RCU enabled.
[ 0.043535] Tracing variant of Tasks RCU enabled.
[ 0.043535] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.043536] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.043542] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.043544] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.047600] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.047799] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.048102] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.054979] Console: colour VGA+ 80x25
[ 0.054982] printk: legacy console [tty0] enabled
[ 0.091949] printk: legacy console [ttyS0] enabled
[ 0.263121] ACPI: Core revision 20250807
[ 0.264559] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.267182] APIC: Switch to symmetric I/O mode setup
[ 0.268831] x2apic enabled
[ 0.270031] APIC: Switched APIC routing to: physical x2apic
[ 0.272643] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.274322] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.277256] Calibrating delay loop (skipped) preset value.. 6192.01 BogoMIPS (lpj=3096006)
[ 0.278348] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.279255] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.281258] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.283256] Speculative Store Bypass: Vulnerable
[ 0.284256] Spectre V2 : Mitigation: Retpolines
[ 0.286255] ITS: Mitigation: Aligned branch/return thunks
[ 0.287255] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.289255] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.291255] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.293256] active return thunk: its_return_thunk
[ 0.294256] x86/fpu: x87 FPU will use FXSAVE
[ 0.310463] Freeing SMP alternatives memory: 40K
[ 0.311259] pid_max: default: 32768 minimum: 301
[ 0.313538] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.314721] landlock: Up and running.
[ 0.315255] Yama: becoming mindful.
[ 0.316376] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.318258] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.422784] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.424298] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.425311] signal: max sigframe size: 1440
[ 0.426296] rcu: Hierarchical SRCU implementation.
[ 0.428255] rcu: Max phase no-delay instances is 400.
[ 0.429297] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.434312] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.436304] smp: Bringing up secondary CPUs ...
[ 0.437385] smpboot: x86: Booting SMP configuration:
[ 0.439255] .... node #0, CPUs: #1 #2 #3
[ 0.443406] smp: Brought up 1 node, 4 CPUs
[ 0.446257] smpboot: Total of 4 processors activated (24768.04 BogoMIPS)
[ 0.447450] Memory: 3999208K/4193760K available (14650K kernel code, 2032K rwdata, 9844K rodata, 2996K init, 1168K bss, 189416K reserved, 0K cma-reserved)
[ 0.448550] devtmpfs: initialized
[ 0.449291] x86/mm: Memory block size: 128MB
[ 0.450660] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.452261] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.453262] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.454912] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.456337] audit: initializing netlink subsys (disabled)
[ 0.457310] audit: type=2000 audit(1785605797.946:1): state=initialized audit_enabled=0 res=1
[ 0.457310] thermal_sys: Registered thermal governor 'step_wise'
[ 0.458289] cpuidle: using governor ladder
[ 0.461259] cpuidle: using governor menu
[ 0.462343] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.464539] PCI: Using configuration type 1 for base access
[ 0.466331] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.468299] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.469256] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.471437] ACPI: Added _OSI(Module Device)
[ 0.472256] ACPI: Added _OSI(Processor Device)
[ 0.474255] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.476376] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.478346] ACPI: Interpreter enabled
[ 0.479263] ACPI: PM: (supports S0 S3 S5)
[ 0.480255] ACPI: Using IOAPIC for interrupt routing
[ 0.482267] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.483255] PCI: Using E820 reservations for host bridge windows
[ 0.485351] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.489650] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.490259] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.491256] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.492262] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.493544] acpiphp: Slot [3] registered
[ 0.494296] acpiphp: Slot [4] registered
[ 0.496282] acpiphp: Slot [5] registered
[ 0.497278] acpiphp: Slot [6] registered
[ 0.499277] acpiphp: Slot [7] registered
[ 0.500277] acpiphp: Slot [8] registered
[ 0.502262] acpiphp: Slot [9] registered
[ 0.503277] acpiphp: Slot [10] registered
[ 0.504280] acpiphp: Slot [11] registered
[ 0.506279] acpiphp: Slot [12] registered
[ 0.507277] acpiphp: Slot [13] registered
[ 0.508277] acpiphp: Slot [14] registered
[ 0.509277] acpiphp: Slot [15] registered
[ 0.510282] acpiphp: Slot [16] registered
[ 0.511278] acpiphp: Slot [17] registered
[ 0.512296] acpiphp: Slot [18] registered
[ 0.513297] acpiphp: Slot [19] registered
[ 0.514290] acpiphp: Slot [20] registered
[ 0.515278] acpiphp: Slot [21] registered
[ 0.516276] acpiphp: Slot [22] registered
[ 0.518277] acpiphp: Slot [23] registered
[ 0.519289] acpiphp: Slot [24] registered
[ 0.521276] acpiphp: Slot [25] registered
[ 0.522285] acpiphp: Slot [26] registered
[ 0.524258] acpiphp: Slot [27] registered
[ 0.525292] acpiphp: Slot [28] registered
[ 0.526278] acpiphp: Slot [29] registered
[ 0.527308] acpiphp: Slot [30] registered
[ 0.529278] acpiphp: Slot [31] registered
[ 0.530273] PCI host bridge to bus 0000:00
[ 0.531259] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.532256] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.533255] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.534256] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.535256] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.537256] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.539322] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.541557] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.543744] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.545875] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.547317] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.548255] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.549255] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.551255] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.553525] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.555895] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.557269] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.559616] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.563722] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.564282] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.565305] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.566395] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.568453] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.571151] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.572269] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.573309] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.574282] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.577831] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.581269] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.582270] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.583305] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.586778] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.590061] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.591269] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.592307] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.597468] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.598375] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.599428] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.600364] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.601320] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.604422] iommu: Default domain type: Translated
[ 0.605255] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.606465] SCSI subsystem initialized
[ 0.608288] pps_core: LinuxPPS API ver. 1 registered
[ 0.609256] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.612259] PTP clock support registered
[ 0.613556] PCI: Using ACPI for IRQ routing
[ 0.615533] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.617314] clocksource: Switched to clocksource kvm-clock
[ 0.619547] VFS: Disk quotas dquot_6.6.0
[ 0.620783] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.622963] pnp: PnP ACPI init
[ 0.624239] pnp: PnP ACPI: found 6 devices
[ 0.631601] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.634241] NET: Registered PF_INET protocol family
[ 0.635731] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.646242] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.648797] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.650994] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.653394] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.655514] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.657346] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.659510] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.661291] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.663326] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.664848] NET: Registered PF_XDP protocol family
[ 0.666189] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.667949] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.669580] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.671372] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.673175] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.675058] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.676629] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.678468] PCI: CLS 0 bytes, default 64
[ 0.679737] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.679876] Unpacking initramfs...
[ 0.680137] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.685796] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.689369] Initialise system trusted keyrings
[ 0.690979] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.699591] Key type asymmetric registered
[ 0.701003] Asymmetric key parser 'x509' registered
[ 0.702713] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.705435] io scheduler mq-deadline registered
[ 0.706823] io scheduler kyber registered
[ 0.708131] io scheduler bfq registered
[ 0.710214] ERST DBG: ERST support is disabled.
[ 0.712275] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.715713] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.718974] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.721722] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.723773] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.729768] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.732175] scsi host0: ata_piix
[ 0.733757] scsi host1: ata_piix
[ 0.734833] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.737040] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.739180] hv_vmbus: registering driver hv_netvsc
[ 0.741090] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.744306] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.745777] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.747188] hv_vmbus: registering driver hyperv_keyboard
[ 0.748774] rtc_cmos 00:05: RTC can wake from S4
[ 0.750837] rtc_cmos 00:05: registered as rtc0
[ 0.751432] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.752549] rtc_cmos 00:05: setting system clock to 2026-08-01T17:36:37 UTC (1785605797)
[ 0.757553] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.759620] intel_pstate: CPU model not supported
[ 0.761122] gre: GRE over IPv4 demultiplexer driver
[ 0.762613] NET: Registered PF_INET6 protocol family
[ 0.764430] Segment Routing with IPv6
[ 0.764737] Freeing initrd memory: 10596K
[ 0.765706] In-situ OAM (IOAM) with IPv6
[ 0.768625] Key type dns_resolver registered
[ 0.769918] IPI shorthand broadcast: enabled
[ 0.773306] sched_clock: Marking stable (549015327, 223448245)->(841560039, -69096467)
[ 0.775795] registered taskstats version 1
[ 0.777170] Loading compiled-in X.509 certificates
[ 0.782136] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.786889] Demotion targets for Node 0: null
[ 0.788679] Key type .fscrypt registered
[ 0.789901] Key type fscrypt-provisioning registered
[ 0.896150] ata2: found unknown device (class 0)
[ 0.899332] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.904398] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.924483] Freeing unused kernel image (initmem) memory: 2996K
[ 0.931518] Write protecting the kernel read-only data: 26624k
[ 0.942308] Freeing unused kernel image (text/rodata gap) memory: 1732K
[ 0.949537] Freeing unused kernel image (rodata/data gap) memory: 396K
[ 0.954193] rodata_test: all tests were successful
[ 0.957373] Run /init as init process
[ 0.969673] Alpine Init 3.14.0-r0
[ 0.971682] Loading boot drivers...
[ 0.990661] ACPI: bus type USB registered
[ 0.992112] usbcore: registered new interface driver usbfs
[ 0.993791] usbcore: registered new interface driver hub
[ 0.995431] usbcore: registered new device driver usb
[ 1.000388] usbcore: registered new interface driver usb-storage
[ 1.060368] loop: module loaded
[ 1.088695] ACPI: bus type drm_connector registered
[ 1.108285] Loading boot drivers: ok.
[ 1.111028] Mounting root...
[ 1.126857] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.129267] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.135580] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.137088] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.139632] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.155851] Console: switching to colour frame buffer device 160x50
[ 1.158332] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.186347] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.211981] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.237965] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.243065] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.247215] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.252350] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.306018] block sr0: the capability attribute has been deprecated.
[ 1.845317] EXT4-fs (vda): mounted filesystem 7af5430b-f94c-484c-8fe6-36878b6de03a ro with ordered data mode. Quota mode: none.
[ 1.856714] Mounting root: ok.
[ 2.270469] random: crng init done
Welcome to Alpine Linux 3.24
Kernel 6.18.35-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.6-r0 -> 3.0.7-r0)
(2/2) Upgrading apk-tools (3.0.6-r0 -> 3.0.7-r0)
Executing busybox-1.37.0-r31.trigger
Continuing with the main upgrade transaction:
( 1/17) Upgrading libblkid (2.42-r0 -> 2.42.1-r0)
( 2/17) Upgrading blkid (2.42-r0 -> 2.42.1-r0)
( 3/17) Upgrading libsmartcols (2.42-r0 -> 2.42.1-r0)
( 4/17) Upgrading partx (2.42-r0 -> 2.42.1-r0)
( 5/17) Upgrading libuuid (2.42-r0 -> 2.42.1-r0)
( 6/17) Upgrading libfdisk (2.42-r0 -> 2.42.1-r0)
( 7/17) Upgrading sfdisk (2.42-r0 -> 2.42.1-r0)
( 8/17) Upgrading libexpat (2.8.1-r0 -> 2.8.2-r0)
( 9/17) Upgrading py3-charset-normalizer (3.4.7-r0 -> 3.4.9-r0)
(10/17) Upgrading py3-charset-normalizer-pyc (3.4.7-r0 -> 3.4.9-r0)
(11/17) Upgrading tzdata (2026b-r0 -> 2026c-r0)
(12/17) Upgrading device-mapper-libs (2.03.35-r2 -> 2.03.35-r3)
(13/17) Upgrading linux-virt (6.18.35-r0 -> 6.18.41-r0)
(14/17) Upgrading libmount (2.42-r0 -> 2.42.1-r0)
(15/17) Upgrading mount (2.42-r0 -> 2.42.1-r0)
(16/17) Upgrading libnvmemi (1.16.1-r1 -> 1.16.2-r0)
(17/17) Upgrading libnvme (1.16.1-r1 -> 1.16.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.14.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.41-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 131.3 MiB in 201 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/12) Installing brotli-libs (1.2.0-r1)
( 2/12) Installing c-ares (1.34.8-r0)
( 3/12) Installing libunistring (1.4.2-r0)
( 4/12) Installing libidn2 (2.3.8-r0)
( 5/12) Installing nghttp2-libs (1.69.0-r0)
( 6/12) Installing libpsl (0.21.5-r3)
( 7/12) Installing libcurl (8.21.0-r0)
( 8/12) Installing pcre2 (10.47-r1)
( 9/12) Installing git (2.54.0-r0)
(10/12) Installing git-init-template (2.54.0-r0)
(11/12) Installing gnu-libiconv-libs (1.18-r0)
(12/12) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r31.trigger
OK: 143.9 MiB in 213 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/asciicast2webp.git asciicast2webp
Cloning into 'asciicast2webp'...
remote: Enumerating objects: 12, done.
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 100% (11/11), done.
remote: Total 12 (delta 0), reused 0 (delta 0), pack-reused 0 (from 0)
Receiving objects: 100% (12/12), 16.59 KiB | 16.59 MiB/s, done.
+ cd asciicast2webp
+ git -c 'advice.detachedHead=false' checkout 5c56c50fcdf286f966e22dcf63d43a602386356a
HEAD is now at 5c56c50 Initial commit
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=5c56c50
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/5c56c50/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake libvterm-static cairo-static libwebp-static jq-dev oniguruma-dev ncurses-static fontconfig-static freetype-static pixman-static libpng-static zlib-static bzip2-static brotli-static expat-static
( 1/119) Installing brotli (1.2.0-r1)
( 2/119) Installing pkgconf (2.5.1-r0)
( 3/119) Installing brotli-dev (1.2.0-r1)
( 4/119) Installing brotli-static (1.2.0-r1)
( 5/119) Installing jansson (2.15.0-r0)
( 6/119) Installing binutils (2.45.1-r1)
( 7/119) Installing libmagic (5.47-r2)
( 8/119) Installing file (5.47-r2)
( 9/119) Installing libgcc-static (15.2.0-r5)
( 10/119) Installing libgomp (15.2.0-r5)
( 11/119) Installing libatomic (15.2.0-r5)
( 12/119) Installing gmp (6.3.0-r4)
( 13/119) Installing isl26 (0.26-r2)
( 14/119) Installing mpfr4 (4.2.2-r0)
( 15/119) Installing mpc1 (1.3.1-r1)
( 16/119) Installing gcc (15.2.0-r5)
( 17/119) Installing libstdc++-dev (15.2.0-r5)
( 18/119) Installing musl-dev (1.2.6-r2)
( 19/119) Installing g++ (15.2.0-r5)
( 20/119) Installing make (4.4.1-r4)
( 21/119) Installing fortify-headers (3.0.1-r2)
( 22/119) Installing patch (2.8-r0)
( 23/119) Installing build-base (0.5-r4)
( 24/119) Installing bzip2-dev (1.0.8-r6)
( 25/119) Installing bzip2-static (1.0.8-r6)
( 26/119) Installing cairo-tools (1.18.4-r1)
( 27/119) Installing libxau (1.0.12-r0)
( 28/119) Installing libxdmcp (1.1.5-r1)
( 29/119) Installing libxcb (1.17.0-r2)
( 30/119) Installing libx11 (1.8.13-r0)
( 31/119) Installing libxext (1.3.7-r0)
( 32/119) Installing libxrender (0.9.12-r0)
( 33/119) Installing libpng (1.6.58-r1)
( 34/119) Installing freetype (2.14.3-r0)
( 35/119) Installing fontconfig (2.17.1-r1)
( 36/119) Installing pixman (0.46.4-r0)
( 37/119) Installing cairo (1.18.4-r1)
( 38/119) Installing libintl (1.0-r0)
( 39/119) Installing glib (2.88.1-r1)
( 40/119) Installing cairo-gobject (1.18.4-r1)
( 41/119) Installing expat (2.8.2-r0)
( 42/119) Installing expat-dev (2.8.2-r0)
( 43/119) Installing zlib-dev (1.3.2-r0)
( 44/119) Installing libpng-dev (1.6.58-r1)
( 45/119) Installing freetype-dev (2.14.3-r0)
( 46/119) Installing fontconfig-dev (2.17.1-r1)
( 47/119) Installing libxml2 (2.13.9-r2)
( 48/119) Installing libxml2-utils (2.13.9-r2)
( 49/119) Installing docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.post-install
( 50/119) Installing libxslt (1.1.43-r3)
( 51/119) Installing docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.post-install
( 52/119) Installing docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.post-install
( 53/119) Installing docbook-xsl (1.79.2-r13)
( 54/119) Installing xz (5.8.3-r0)
( 55/119) Installing gettext-asprintf (1.0-r0)
( 56/119) Installing gettext-libs (1.0-r0)
( 57/119) Installing gettext-envsubst (1.0-r0)
( 58/119) Installing gettext (1.0-r0)
( 59/119) Installing gettext-dev (1.0-r0)
( 60/119) Installing py3-parsing (3.3.2-r1)
( 61/119) Installing py3-parsing-pyc (3.3.2-r1)
( 62/119) Installing py3-packaging (26.2-r0)
( 63/119) Installing py3-packaging-pyc (26.2-r0)
( 64/119) Installing linux-headers (7.0.0-r1)
( 65/119) Installing libffi-dev (3.5.2-r1)
( 66/119) Installing bsd-compat-headers (0.7.2-r6)
( 67/119) Installing libformw (6.6_p20260516-r0)
( 68/119) Installing libmenuw (6.6_p20260516-r0)
( 69/119) Installing libncurses++ (6.6_p20260516-r0)
( 70/119) Installing ncurses-dev (6.6_p20260516-r0)
( 71/119) Installing libedit-dev (20260508.3.1-r1)
( 72/119) Installing libpcre2-16 (10.47-r1)
( 73/119) Installing libpcre2-32 (10.47-r1)
( 74/119) Installing pcre2-dev (10.47-r1)
( 75/119) Installing liblastlog2 (2.42.1-r0)
( 76/119) Installing sqlite (3.53.2-r0)
( 77/119) Installing sqlite-dev (3.53.2-r0)
( 78/119) Installing util-linux-dev (2.42.1-r0)
( 79/119) Installing glib-dev (2.88.1-r1)
( 80/119) Installing pixman-dev (0.46.4-r0)
( 81/119) Installing xorgproto (2025.1-r0)
( 82/119) Installing libxau-dev (1.0.12-r0)
( 83/119) Installing xcb-proto (1.17.0-r1)
( 84/119) Installing xcb-proto-pyc (1.17.0-r1)
( 85/119) Installing libxdmcp-dev (1.1.5-r1)
( 86/119) Installing libxcb-dev (1.17.0-r2)
( 87/119) Installing xtrans (1.6.0-r0)
( 88/119) Installing libx11-dev (1.8.13-r0)
( 89/119) Installing libxext-dev (1.3.7-r0)
( 90/119) Installing libxrender-dev (0.9.12-r0)
( 91/119) Installing cairo-dev (1.18.4-r1)
( 92/119) Installing cairo-static (1.18.4-r1)
( 93/119) Installing acl-libs (2.3.2-r1)
( 94/119) Installing lz4-libs (1.10.0-r1)
( 95/119) Installing libarchive (3.8.7-r0)
( 96/119) Installing rhash-libs (1.4.6-r0)
( 97/119) Installing libuv (1.52.1-r0)
( 98/119) Installing cmake (4.2.3-r0)
( 99/119) Installing expat-static (2.8.2-r0)
(100/119) Installing fontconfig-static (2.17.1-r1)
(101/119) Installing freetype-static (2.14.3-r0)
(102/119) Installing oniguruma (6.9.10-r0)
(103/119) Installing jq (1.8.1-r0)
(104/119) Installing jq-dev (1.8.1-r0)
(105/119) Installing libpng-static (1.6.58-r1)
(106/119) Installing libvterm (0.3.3-r0)
(107/119) Installing libvterm-dev (0.3.3-r0)
(108/119) Installing libvterm-static (0.3.3-r0)
(109/119) Installing libsharpyuv (1.6.0-r0)
(110/119) Installing libwebp (1.6.0-r0)
(111/119) Installing libwebpdecoder (1.6.0-r0)
(112/119) Installing libwebpdemux (1.6.0-r0)
(113/119) Installing libwebpmux (1.6.0-r0)
(114/119) Installing libwebp-dev (1.6.0-r0)
(115/119) Installing libwebp-static (1.6.0-r0)
(116/119) Installing ncurses-static (6.6_p20260516-r0)
(117/119) Installing oniguruma-dev (6.9.10-r0)
(118/119) Installing pixman-static (0.46.4-r0)
(119/119) Installing zlib-static (1.3.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing glib-2.88.1-r1.trigger
* No schema files found: doing nothing.
OK: 602.4 MiB in 332 packages
+ cmake -B build
-- The CXX compiler identification is GNU 15.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for modules 'vterm;cairo;libwebp;libwebpmux;libjq;oniguruma'
-- Found vterm, version 0.3.3
-- Found cairo, version 1.18.4
-- Found libwebp, version 1.6.0
-- Found libwebpmux, version 1.6.0
-- Found libjq, version 1.8.1
-- Found oniguruma, version 6.9.10
-- Checking for one of the modules 'tinfo;ncursesw'
-- Configuring done (0.4s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/asciicast2webp/build
+ cmake --build build -- package
[ 50%] Building CXX object CMakeFiles/asciicast2webp.dir/asciicast2webp.cpp.o
[100%] Linking CXX executable asciicast2webp
[100%] Built target asciicast2webp
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: asciicast2webp
CPack: - Install project: asciicast2webp []
CPack: Create package
CPack: - package: /home/ci/asciicast2webp/build/asciicast2webp-5c56c50-Linux-x86_64.tar.gz generated.
+ doas sed -i -E 's/, (x11|xext|xrender|xcb(-render|-shm)?)( >= +[^,]+)?//g' /usr/lib/pkgconfig/cairo.pc
+ cmake -S . -B build-static '-DCMAKE_BUILD_TYPE=Release' '-DCMAKE_EXE_LINKER_FLAGS=-static -w' '-DCPACK_STRIP_FILES=YES' '-DCMAKE_INSTALL_PREFIX=/' '-DCMAKE_INSTALL_BINDIR=/' '-DCMAKE_INSTALL_MANDIR=/man' '-DCMAKE_INSTALL_DOCDIR=/doc'
-- The CXX compiler identification is GNU 15.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for modules 'vterm;cairo;libwebp;libwebpmux;libjq;oniguruma'
-- Found vterm, version 0.3.3
-- Found cairo, version 1.18.4
-- Found libwebp, version 1.6.0
-- Found libwebpmux, version 1.6.0
-- Found libjq, version 1.8.1
-- Found oniguruma, version 6.9.10
-- Checking for one of the modules 'tinfo;ncursesw'
-- Configuring done (0.4s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/asciicast2webp/build-static
+ sed -i 's/"asciicast2webp-/&static-/' build-static/CPackConfig.cmake
+ cmake --build build-static -- package
[ 50%] Building CXX object CMakeFiles/asciicast2webp.dir/asciicast2webp.cpp.o
[100%] Linking CXX executable asciicast2webp
[100%] Built target asciicast2webp
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: asciicast2webp
CPack: - Install project: asciicast2webp []
CPack: Create package
CPack: - package: /home/ci/asciicast2webp/build-static/asciicast2webp-static-5c56c50-Linux-x86_64.tar.gz generated.
+ cmake --build build-static -- test
Running tests...
Test project /home/ci/asciicast2webp/build-static
Start 1: fixture
1/3 Test #1: fixture .......................... Passed 0.03 sec
Start 2: fixture-drop-short
2/3 Test #2: fixture-drop-short ............... Passed 0.02 sec
Start 3: fixture-v3
3/3 Test #3: fixture-v3 ....................... Passed 0.02 sec
100% tests passed, 0 tests failed out of 3
Total Test time (real) = 0.07 sec
+ mv build-static/asciicast2webp-static-5c56c50-Linux-x86_64.tar.gz /home/ci/acid-deploy
Deploy log
+ mv -- asciicast2webp-static-5c56c50-Linux-x86_64.tar.gz /home/acid/cd