- Created
- 21d ago
- Changed
- 21d ago
- Project
- p/asciicast2webp
- Commit
- 322d8af210e8b9bcc64fb43b3701ebcf024595ac
- Runner
- Alpine 3.24 aarch64
- State
- Success
- Notified
- 1
- Duration
- 12m35s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_qemu='qemu-system-aarch64 -M virt -cpu max -bios /usr/share/edk2/aarch64/QEMU_EFI.fd'
+ acid_dist=alpine
+ acid_image=generic_alpine-3.24.1-aarch64-uefi-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/generic_alpine-3.24.1-aarch64-uefi-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/generic_alpine-3.24.1-aarch64-uefi-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-aarch64 -M virt -cpu max -bios /usr/share/edk2/aarch64/QEMU_EFI.fd -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
UEFI firmware (version built at 10:07:17 on May 22 2026)
^[[=3h
^[[8;056;240t
BdsDxe: loading Boot0002 "UEFI Misc Device" from PciRoot(0x0)/Pci(0x2,0x0)
BdsDxe: starting Boot0002 "UEFI Misc Device" from PciRoot(0x0)/Pci(0x2,0x0)
error: /home/buildozer/aports/main/grub/src/grub-2.14/grub-core/term/serial.c:grub_cmd_serial:278:serial port `com0' isn't found.
error: /home/buildozer/aports/main/grub/src/grub-2.14/grub-core/commands/terminal.c:handle_command:138:terminal `serial' isn't found.
error: /home/buildozer/aports/main/grub/src/grub-2.14/grub-core/commands/terminal.c:handle_command:138:terminal `serial' isn't found.
GNU GRUB version 2.14
/--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------\
|*Alpine Linux v3.24, with Linux virt |
| UEFI Firmware Settings |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
\--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------/
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line.
The highlighted entry will be executed automatically in 0s.
Booting `Alpine Linux v3.24, with Linux virt'
Loading Linux virt ...
Loading initial ramdisk ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x000f0510]
[ 0.000000] Linux version 6.18.35-0-virt (buildozer@build-3-24-aarch64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-06-09 12:34:47
[ 0.000000] efi: EFI v2.7 by EDK II
[ 0.000000] efi: SMBIOS 3.0=0x13fda0000 MEMATTR=0x13e55a418 ACPI 2.0=0x13e9ba018 INITRD=0x13e542e98 RNG=0x13e9ba198 MEMRESERVE=0x13e542c18
[ 0.000000] random: crng init done
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000013E9BA018 000024 (v02 BOCHS )
[ 0.000000] ACPI: XSDT 0x000000013E9BAF18 000064 (v01 BOCHS BXPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000013E9BAB18 000114 (v06 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x000000013E7B3018 001551 (v02 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0x000000013E9BAC98 00019C (v04 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: PPTT 0x000000013E9BA098 00009C (v02 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: GTDT 0x000000013E9BA818 000068 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: MCFG 0x000000013E9BAA98 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: SPCR 0x000000013E9BA918 000050 (v02 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: DBG2 0x000000013E9BA998 000057 (v00 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: IORT 0x000000013E9BAA18 000054 (v05 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.000000] ACPI: SPCR: console: pl011,mmio32,0x9000000,9600
[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13f213b40-0x13f215fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000013ea8ffff]
[ 0.000000] node 0: [mem 0x000000013ea90000-0x000000013eacffff]
[ 0.000000] node 0: [mem 0x000000013ead0000-0x000000013ebcffff]
[ 0.000000] node 0: [mem 0x000000013ebd0000-0x000000013ec0ffff]
[ 0.000000] node 0: [mem 0x000000013ec10000-0x000000013ec4ffff]
[ 0.000000] node 0: [mem 0x000000013ec50000-0x000000013ee8ffff]
[ 0.000000] node 0: [mem 0x000000013ee90000-0x000000013eecffff]
[ 0.000000] node 0: [mem 0x000000013eed0000-0x000000013ef9ffff]
[ 0.000000] node 0: [mem 0x000000013efa0000-0x000000013fbfffff]
[ 0.000000] node 0: [mem 0x000000013fc00000-0x000000013ffeffff]
[ 0.000000] node 0: [mem 0x000000013fff0000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000013fffffff]
[ 0.000000] psci: probing for conduit method from ACPI.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 34 pages/cpu s99544 r8192 d31528 u139264
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Address authentication (IMP DEF algorithm)
[ 0.000000] CPU features: detected: HCRX_EL2 register
[ 0.000000] CPU features: detected: Stage-1 Permission Indirection Extension (S1PIE)
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-virt root=UUID=29c86e07-1518-4feb-85ff-c46ca56c3f7f ro modules=sd-mod,usb-storage,ext4,gpio_pl061,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0
[ 0.000000] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4,gpio_pl061,ena,gve,mana", will be passed to user space.
[ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576
[ 0.000000] Policy zone: Normal
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Dynamic Preempt: none
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv2m: ACPI overriding V2M MSI_TYPER (base:80, num:64)
[ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000074] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.010400] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.034038] Console: colour dummy device 80x25
[ 0.036722] printk: legacy console [tty0] enabled
[ 0.045978] ACPI: Core revision 20250807
[ 0.054005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=1000000)
[ 0.054751] pid_max: default: 32768 minimum: 301
[ 0.059830] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.063078] landlock: Up and running.
[ 0.063199] Yama: becoming mindful.
[ 0.067980] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.068278] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.138428] rcu: Hierarchical SRCU implementation.
[ 0.138582] rcu: Max phase no-delay instances is 400.
[ 0.141568] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.149757] Remapping and enabling EFI services.
[ 0.158454] smp: Bringing up secondary CPUs ...
[ 0.169151] Detected PIPT I-cache on CPU1
[ 0.173432] CPU1: Booted secondary processor 0x0000000001 [0x000f0510]
[ 0.181193] Detected PIPT I-cache on CPU2
[ 0.181452] CPU2: Booted secondary processor 0x0000000002 [0x000f0510]
[ 0.185597] Detected PIPT I-cache on CPU3
[ 0.185966] CPU3: Booted secondary processor 0x0000000003 [0x000f0510]
[ 0.187883] smp: Brought up 1 node, 4 CPUs
[ 0.188406] SMP: Total of 4 processors activated.
[ 0.188701] CPU: All CPU(s) started at EL1
[ 0.189186] CPU features: detected: Branch Target Identification
[ 0.189301] CPU features: detected: 32-bit EL0 Support
[ 0.189368] CPU features: detected: 32-bit EL1 Support
[ 0.189418] CPU features: detected: ARMv8.4 Translation Table Level
[ 0.189485] CPU features: detected: Instruction cache invalidation not required for I/D coherence
[ 0.189672] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.189853] CPU features: detected: Common not Private translations
[ 0.189909] CPU features: detected: CRC32 instructions
[ 0.189957] CPU features: detected: Data independent timing control (DIT)
[ 0.190010] CPU features: detected: E0PD
[ 0.190050] CPU features: detected: Enhanced Counter Virtualization
[ 0.190203] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF)
[ 0.190292] CPU features: detected: Enhanced Privileged Access Never
[ 0.190361] CPU features: detected: Enhanced Virtualization Traps
[ 0.190411] CPU features: detected: Fine Grained Traps
[ 0.190482] CPU features: detected: Guarded Control Stack (GCS)
[ 0.190606] CPU features: detected: Generic authentication (IMP DEF algorithm)
[ 0.190980] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.191157] CPU features: detected: 52-bit Virtual Addressing for KVM (LPA2)
[ 0.191254] CPU features: detected: LSE atomic instructions
[ 0.191349] CPU features: detected: Memory Copy and Memory Set instructions
[ 0.191408] CPU features: detected: Privileged Access Never
[ 0.191473] CPU features: detected: SCTLR2
[ 0.191514] CPU features: detected: RAS Extension Support
[ 0.191631] CPU features: detected: RASv1p1 Extension Support
[ 0.191685] CPU features: detected: Random Number Generator
[ 0.191734] CPU features: detected: Speculation barrier (SB)
[ 0.191784] CPU features: detected: Stage-2 Force Write-Back
[ 0.191968] CPU features: detected: Trap EL0 IMPLEMENTATION DEFINED functionality
[ 0.192116] CPU features: detected: TLB range maintenance instructions
[ 0.192222] CPU features: detected: WFx with timeout
[ 0.192473] CPU features: detected: Scalable Matrix Extension
[ 0.192559] CPU features: detected: FA64
[ 0.192602] CPU features: detected: SME2
[ 0.192644] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.192696] CPU features: detected: Scalable Vector Extension
[ 0.212926] alternatives: applying system-wide alternatives
[ 0.235970] CPU features: detected: Hardware dirty bit management on CPU0-3
[ 0.237373] SVE: maximum available vector length 256 bytes per vector
[ 0.237534] SVE: default vector length 64 bytes per vector
[ 0.239401] SME: minimum available vector length 16 bytes per vector
[ 0.239480] SME: maximum available vector length 256 bytes per vector
[ 0.239547] SME: default vector length 32 bytes per vector
[ 0.264282] Memory: 3986052K/4194304K available (13248K kernel code, 1990K rwdata, 8392K rodata, 2048K init, 9281K bss, 203004K reserved, 0K cma-reserved)
[ 0.310056] devtmpfs: initialized
[ 0.348525] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.350360] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.351330] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.352668] 23952 pages in range for non-PLT usage
[ 0.352754] 515472 pages in range for PLT usage
[ 0.357605] pinctrl core: initialized pinctrl subsystem
[ 0.365651] SMBIOS 3.0.0 present.
[ 0.366008] DMI: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022
[ 0.366674] DMI: Memory slots populated: 1/1
[ 0.398370] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.407702] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.409107] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.409764] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.410308] audit: initializing netlink subsys (disabled)
[ 0.413422] audit: type=2000 audit(0.321:1): state=initialized audit_enabled=0 res=1
[ 0.419113] thermal_sys: Registered thermal governor 'step_wise'
[ 0.421422] cpuidle: using governor ladder
[ 0.422102] cpuidle: using governor menu
[ 0.424736] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.426393] ASID allocator initialised with 65536 entries
[ 0.427048] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.429069] Serial: AMBA PL011 UART driver
[ 0.443545] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.443662] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.443790] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.443905] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.444011] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.444177] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.444240] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.444294] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.463461] ACPI: Added _OSI(Module Device)
[ 0.463677] ACPI: Added _OSI(Processor Device)
[ 0.463735] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.513593] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.533049] ACPI: Interpreter enabled
[ 0.533238] ACPI: Using GIC for interrupt routing
[ 0.534130] ACPI: MCFG table detected, 1 entries
[ 0.629689] ACPI: CPU0 has been hot-added
[ 0.631340] ACPI: CPU1 has been hot-added
[ 0.632348] ACPI: CPU2 has been hot-added
[ 0.633173] ACPI: CPU3 has been hot-added
[ 0.653882] ARMH0011:00: ttyAMA0 at MMIO 0x9000000 (irq = 12, base_baud = 0) is a SBSA
[ 0.656990] printk: console [ttyAMA0] enabled
[ 0.728604] ACPI: PCI: Interrupt link L000 configured for IRQ 35
[ 0.729364] ACPI: PCI: Interrupt link L001 configured for IRQ 36
[ 0.729809] ACPI: PCI: Interrupt link L002 configured for IRQ 37
[ 0.730327] ACPI: PCI: Interrupt link L003 configured for IRQ 38
[ 0.731360] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.735007] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.749050] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[ 0.752472] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 0.759686] acpi PNP0A08:00: ECAM area [mem 0x4010000000-0x401fffffff] reserved by PNP0C02:00
[ 0.760729] acpi PNP0A08:00: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff]
[ 0.762844] ACPI: Remapped I/O 0x000000003eff0000 to [io 0x0000-0xffff window]
[ 0.770313] PCI host bridge to bus 0000:00
[ 0.771431] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff window]
[ 0.771587] pci_bus 0000:00: root bus resource [io 0x0000-0xffff window]
[ 0.771764] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff window]
[ 0.772397] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.775267] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint
[ 0.783747] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.785296] pci 0000:00:01.0: BAR 0 [io 0x0100-0x011f]
[ 0.785540] pci 0000:00:01.0: BAR 1 [mem 0x10042000-0x10042fff]
[ 0.785794] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]
[ 0.786256] pci 0000:00:01.0: ROM [mem 0xfffc0000-0xffffffff pref]
[ 0.788416] pci 0000:00:02.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.789523] pci 0000:00:02.0: BAR 0 [io 0x0080-0x00ff]
[ 0.789862] pci 0000:00:02.0: BAR 1 [mem 0x10041000-0x10041fff]
[ 0.789993] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]
[ 0.792683] pci 0000:00:03.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.793778] pci 0000:00:03.0: BAR 0 [io 0x0000-0x007f]
[ 0.793985] pci 0000:00:03.0: BAR 1 [mem 0x10040000-0x10040fff]
[ 0.794119] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]
[ 0.799011] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned
[ 0.799743] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned
[ 0.800593] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned
[ 0.800953] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned
[ 0.801345] pci 0000:00:01.0: BAR 1 [mem 0x10040000-0x10040fff]: assigned
[ 0.801512] pci 0000:00:02.0: BAR 1 [mem 0x10041000-0x10041fff]: assigned
[ 0.801734] pci 0000:00:03.0: BAR 1 [mem 0x10042000-0x10042fff]: assigned
[ 0.801946] pci 0000:00:02.0: BAR 0 [io 0x1000-0x107f]: assigned
[ 0.802923] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10ff]: assigned
[ 0.803569] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned
[ 0.806588] pci_bus 0000:00: resource 4 [mem 0x10000000-0x3efeffff window]
[ 0.806783] pci_bus 0000:00: resource 5 [io 0x0000-0xffff window]
[ 0.806902] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff window]
[ 0.813591] iommu: Default domain type: Translated
[ 0.813818] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.824654] efivars: Registered efivars operations
[ 0.844633] clocksource: Switched to clocksource arch_sys_counter
[ 0.854477] VFS: Disk quotas dquot_6.6.0
[ 0.854852] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.859616] pnp: PnP ACPI init
[ 0.865734] system 00:00: [mem 0x4010000000-0x401fffffff window] could not be reserved
[ 0.866925] pnp: PnP ACPI: found 1 devices
[ 0.931431] NET: Registered PF_INET protocol family
[ 0.933519] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 1.044944] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 1.045512] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.045972] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.047253] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 1.048125] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.051480] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 1.052374] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 1.053016] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 1.056216] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.057208] NET: Registered PF_XDP protocol family
[ 1.057835] PCI: CLS 0 bytes, default 64
[ 1.064936] kvm [1]: HYP mode not available
[ 1.066975] Unpacking initramfs...
[ 1.073859] Initialise system trusted keyrings
[ 1.078327] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 1.196189] Key type asymmetric registered
[ 1.196563] Asymmetric key parser 'x509' registered
[ 1.197512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.198904] io scheduler mq-deadline registered
[ 1.199307] io scheduler kyber registered
[ 1.199974] io scheduler bfq registered
[ 1.236715] ACPI: \_SB_.L001: Enabled at IRQ 36
[ 1.238597] virtio-pci 0000:00:01.0: enabling device (0005 -> 0007)
[ 1.251997] ACPI: \_SB_.L002: Enabled at IRQ 37
[ 1.252606] virtio-pci 0000:00:02.0: enabling device (0005 -> 0007)
[ 1.262489] ACPI: \_SB_.L003: Enabled at IRQ 38
[ 1.262844] virtio-pci 0000:00:03.0: enabling device (0005 -> 0007)
[ 1.268502] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.295506] hv_vmbus: registering driver hyperv_keyboard
[ 1.301825] rtc-efi rtc-efi.0: registered as rtc0
[ 1.303608] rtc-efi rtc-efi.0: setting system clock to 2026-08-02T19:10:50 UTC (1785697850)
[ 1.309740] NET: Registered PF_INET6 protocol family
[ 1.325749] Segment Routing with IPv6
[ 1.326593] In-situ OAM (IOAM) with IPv6
[ 1.396671] registered taskstats version 1
[ 1.405735] Loading compiled-in X.509 certificates
[ 1.545950] Freeing initrd memory: 10880K
[ 1.729816] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: 87fa969a47f3e2a6aa35859eb932a17c95abcd82'
[ 1.779699] Demotion targets for Node 0: null
[ 1.783036] Key type .fscrypt registered
[ 1.783570] Key type fscrypt-provisioning registered
[ 1.823029] clk: Disabling unused clocks
[ 1.824585] PM: genpd: Disabling unused power domains
[ 2.243504] Freeing unused kernel memory: 2048K
[ 2.246797] Run /init as init process
[ 2.517571] Alpine Init 3.14.0-r0
[ 2.525269] Loading boot drivers...
[ 2.788107] SCSI subsystem initialized
[ 2.877411] ACPI: bus type USB registered
[ 2.878895] usbcore: registered new interface driver usbfs
[ 2.879903] usbcore: registered new interface driver hub
[ 2.880679] usbcore: registered new device driver usb
[ 2.932997] usbcore: registered new interface driver usb-storage
[ 3.170940] pps_core: LinuxPPS API ver. 1 registered
[ 3.171318] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.187585] PTP clock support registered
[ 3.332557] loop: module loaded
[ 3.500339] ACPI: bus type drm_connector registered
[ 3.683879] Loading boot drivers: ok.
[ 3.715421] Mounting root...
[ 4.507860] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 4.522884] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 4.545458] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 4.545674] GPT:503807 != 12582911
[ 4.545756] GPT:Alternate GPT header not at the end of the disk.
[ 4.545818] GPT:503807 != 12582911
[ 4.545871] GPT: Use GNU Parted to correct GPT errors.
[ 4.546641] vda: vda1 vda2
[ 4.550545] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 4.554110] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 6.210320] EXT4-fs (vda2): mounted filesystem 29c86e07-1518-4feb-85ff-c46ca56c3f7f ro with ordered data mode. Quota mode: none.
[ 6.214434] Mounting root: ok.
Welcome to Alpine Linux 3.24
Kernel 6.18.35-0-virt on aarch64 (/dev/ttyAMA0)
alpine-ci login:
Task log
.............................................................status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.6-r0 -> 3.0.7-r0)
(2/2) Upgrading apk-tools (3.0.6-r0 -> 3.0.7-r0)
Executing busybox-1.37.0-r31.trigger
Continuing with the main upgrade transaction:
( 1/17) Upgrading libblkid (2.42-r0 -> 2.42.1-r0)
( 2/17) Upgrading blkid (2.42-r0 -> 2.42.1-r0)
( 3/17) Upgrading libsmartcols (2.42-r0 -> 2.42.1-r0)
( 4/17) Upgrading partx (2.42-r0 -> 2.42.1-r0)
( 5/17) Upgrading libuuid (2.42-r0 -> 2.42.1-r0)
( 6/17) Upgrading libfdisk (2.42-r0 -> 2.42.1-r0)
( 7/17) Upgrading sfdisk (2.42-r0 -> 2.42.1-r0)
( 8/17) Upgrading libexpat (2.8.1-r0 -> 2.8.2-r0)
( 9/17) Upgrading py3-charset-normalizer (3.4.7-r0 -> 3.4.9-r0)
(10/17) Upgrading py3-charset-normalizer-pyc (3.4.7-r0 -> 3.4.9-r0)
(11/17) Upgrading tzdata (2026b-r0 -> 2026c-r0)
(12/17) Upgrading device-mapper-libs (2.03.35-r2 -> 2.03.35-r3)
(13/17) Upgrading linux-virt (6.18.35-r0 -> 6.18.41-r0)
(14/17) Upgrading libmount (2.42-r0 -> 2.42.1-r0)
(15/17) Upgrading mount (2.42-r0 -> 2.42.1-r0)
(16/17) Upgrading libnvmemi (1.16.1-r1 -> 1.16.2-r0)
(17/17) Upgrading libnvme (1.16.1-r1 -> 1.16.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.14.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.41-0-virt
Executing grub-2.14-r0.trigger
* Generating grub configuration file ...
* Found linux image: /boot/vmlinuz-virt
* Found initrd image: /boot/initramfs-virt
* Adding boot menu entry for UEFI Firmware Settings ...
* done
OK: 179.2 MiB in 202 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/12) Installing brotli-libs (1.2.0-r1)
( 2/12) Installing c-ares (1.34.8-r0)
( 3/12) Installing libunistring (1.4.2-r0)
( 4/12) Installing libidn2 (2.3.8-r0)
( 5/12) Installing nghttp2-libs (1.69.0-r0)
( 6/12) Installing libpsl (0.21.5-r3)
( 7/12) Installing libcurl (8.21.0-r0)
( 8/12) Installing pcre2 (10.47-r1)
( 9/12) Installing git (2.54.0-r0)
(10/12) Installing git-init-template (2.54.0-r0)
(11/12) Installing gnu-libiconv-libs (1.18-r0)
(12/12) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r31.trigger
OK: 192.5 MiB in 214 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/asciicast2webp.git asciicast2webp
Cloning into 'asciicast2webp'...
remote: Enumerating objects: 28, done.
remote: Counting objects: 100% (28/28), done.
remote: Compressing objects: 100% (27/27), done.
remote: Total 28 (delta 11), reused 0 (delta 0), pack-reused 0 (from 0)
Receiving objects: 100% (28/28), 22.55 KiB | 405.00 KiB/s, done.
Resolving deltas: 100% (11/11), done.
+ cd asciicast2webp
+ git -c 'advice.detachedHead=false' checkout 322d8af210e8b9bcc64fb43b3701ebcf024595ac
HEAD is now at 322d8af Shuffle code
+ git describe --always --tags --match+ 'v*'sed
s/^v//
+ version=322d8af
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/322d8af/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake libvterm-static cairo-static libwebp-static jq-dev oniguruma-dev ncurses-static fontconfig-static freetype-static pixman-static libpng-static zlib-static bzip2-static brotli-static expat-static
( 1/119) Installing brotli (1.2.0-r1)
( 2/119) Installing pkgconf (2.5.1-r0)
( 3/119) Installing brotli-dev (1.2.0-r1)
( 4/119) Installing brotli-static (1.2.0-r1)
( 5/119) Installing jansson (2.15.0-r0)
( 6/119) Installing binutils (2.45.1-r1)
( 7/119) Installing libmagic (5.47-r2)
( 8/119) Installing file (5.47-r2)
( 9/119) Installing libgcc-static (15.2.0-r5)
( 10/119) Installing libgomp (15.2.0-r5)
( 11/119) Installing libatomic (15.2.0-r5)
( 12/119) Installing gmp (6.3.0-r4)
( 13/119) Installing isl26 (0.26-r2)
( 14/119) Installing mpfr4 (4.2.2-r0)
( 15/119) Installing mpc1 (1.3.1-r1)
( 16/119) Installing gcc (15.2.0-r5)
( 17/119) Installing libstdc++-dev (15.2.0-r5)
( 18/119) Installing musl-dev (1.2.6-r2)
( 19/119) Installing g++ (15.2.0-r5)
( 20/119) Installing make (4.4.1-r4)
( 21/119) Installing fortify-headers (3.0.1-r2)
( 22/119) Installing patch (2.8-r0)
( 23/119) Installing build-base (0.5-r4)
( 24/119) Installing bzip2-dev (1.0.8-r6)
( 25/119) Installing bzip2-static (1.0.8-r6)
( 26/119) Installing cairo-tools (1.18.4-r1)
( 27/119) Installing libxau (1.0.12-r0)
( 28/119) Installing libxdmcp (1.1.5-r1)
( 29/119) Installing libxcb (1.17.0-r2)
( 30/119) Installing libx11 (1.8.13-r0)
( 31/119) Installing libxext (1.3.7-r0)
( 32/119) Installing libxrender (0.9.12-r0)
( 33/119) Installing libpng (1.6.58-r1)
( 34/119) Installing freetype (2.14.3-r0)
( 35/119) Installing fontconfig (2.17.1-r1)
( 36/119) Installing pixman (0.46.4-r0)
( 37/119) Installing cairo (1.18.4-r1)
( 38/119) Installing libintl (1.0-r0)
( 39/119) Installing glib (2.88.1-r1)
( 40/119) Installing cairo-gobject (1.18.4-r1)
( 41/119) Installing expat (2.8.2-r0)
( 42/119) Installing expat-dev (2.8.2-r0)
( 43/119) Installing zlib-dev (1.3.2-r0)
( 44/119) Installing libpng-dev (1.6.58-r1)
( 45/119) Installing freetype-dev (2.14.3-r0)
( 46/119) Installing fontconfig-dev (2.17.1-r1)
( 47/119) Installing libxml2 (2.13.9-r2)
( 48/119) Installing libxml2-utils (2.13.9-r2)
( 49/119) Installing docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.post-install
( 50/119) Installing libxslt (1.1.43-r3)
( 51/119) Installing docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.post-install
( 52/119) Installing docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.post-install
( 53/119) Installing docbook-xsl (1.79.2-r13)
( 54/119) Installing xz (5.8.3-r0)
( 55/119) Installing gettext-asprintf (1.0-r0)
( 56/119) Installing gettext-libs (1.0-r0)
( 57/119) Installing gettext-envsubst (1.0-r0)
( 58/119) Installing gettext (1.0-r0)
( 59/119) Installing gettext-dev (1.0-r0)
( 60/119) Installing py3-parsing (3.3.2-r1)
( 61/119) Installing py3-parsing-pyc (3.3.2-r1)
( 62/119) Installing py3-packaging (26.2-r0)
( 63/119) Installing py3-packaging-pyc (26.2-r0)
( 64/119) Installing linux-headers (7.0.0-r1)
( 65/119) Installing libffi-dev (3.5.2-r1)
( 66/119) Installing bsd-compat-headers (0.7.2-r6)
( 67/119) Installing libformw (6.6_p20260516-r0)
( 68/119) Installing libmenuw (6.6_p20260516-r0)
( 69/119) Installing libncurses++ (6.6_p20260516-r0)
( 70/119) Installing ncurses-dev (6.6_p20260516-r0)
( 71/119) Installing libedit-dev (20260508.3.1-r1)
( 72/119) Installing libpcre2-16 (10.47-r1)
( 73/119) Installing libpcre2-32 (10.47-r1)
( 74/119) Installing pcre2-dev (10.47-r1)
( 75/119) Installing liblastlog2 (2.42.1-r0)
( 76/119) Installing sqlite (3.53.2-r0)
( 77/119) Installing sqlite-dev (3.53.2-r0)
( 78/119) Installing util-linux-dev (2.42.1-r0)
( 79/119) Installing glib-dev (2.88.1-r1)
( 80/119) Installing pixman-dev (0.46.4-r0)
( 81/119) Installing xorgproto (2025.1-r0)
( 82/119) Installing libxau-dev (1.0.12-r0)
( 83/119) Installing xcb-proto (1.17.0-r1)
( 84/119) Installing xcb-proto-pyc (1.17.0-r1)
( 85/119) Installing libxdmcp-dev (1.1.5-r1)
( 86/119) Installing libxcb-dev (1.17.0-r2)
( 87/119) Installing xtrans (1.6.0-r0)
( 88/119) Installing libx11-dev (1.8.13-r0)
( 89/119) Installing libxext-dev (1.3.7-r0)
( 90/119) Installing libxrender-dev (0.9.12-r0)
( 91/119) Installing cairo-dev (1.18.4-r1)
( 92/119) Installing cairo-static (1.18.4-r1)
( 93/119) Installing acl-libs (2.3.2-r1)
( 94/119) Installing lz4-libs (1.10.0-r1)
( 95/119) Installing libarchive (3.8.7-r0)
( 96/119) Installing rhash-libs (1.4.6-r0)
( 97/119) Installing libuv (1.52.1-r0)
( 98/119) Installing cmake (4.2.3-r0)
( 99/119) Installing expat-static (2.8.2-r0)
(100/119) Installing fontconfig-static (2.17.1-r1)
(101/119) Installing freetype-static (2.14.3-r0)
(102/119) Installing oniguruma (6.9.10-r0)
(103/119) Installing jq (1.8.1-r0)
(104/119) Installing jq-dev (1.8.1-r0)
(105/119) Installing libpng-static (1.6.58-r1)
(106/119) Installing libvterm (0.3.3-r0)
(107/119) Installing libvterm-dev (0.3.3-r0)
(108/119) Installing libvterm-static (0.3.3-r0)
(109/119) Installing libsharpyuv (1.6.0-r0)
(110/119) Installing libwebp (1.6.0-r0)
(111/119) Installing libwebpdecoder (1.6.0-r0)
(112/119) Installing libwebpdemux (1.6.0-r0)
(113/119) Installing libwebpmux (1.6.0-r0)
(114/119) Installing libwebp-dev (1.6.0-r0)
(115/119) Installing libwebp-static (1.6.0-r0)
(116/119) Installing ncurses-static (6.6_p20260516-r0)
(117/119) Installing oniguruma-dev (6.9.10-r0)
(118/119) Installing pixman-static (0.46.4-r0)
(119/119) Installing zlib-static (1.3.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing glib-2.88.1-r1.trigger
* No schema files found: doing nothing.
OK: 620.5 MiB in 333 packages
+ cmake -B build
-- The CXX compiler identification is GNU 15.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for modules 'vterm;cairo;libwebp;libwebpmux;libjq;oniguruma'
-- Found vterm, version 0.3.3
-- Found cairo, version 1.18.4
-- Found libwebp, version 1.6.0
-- Found libwebpmux, version 1.6.0
-- Found libjq, version 1.8.1
-- Found oniguruma, version 6.9.10
-- Checking for one of the modules 'tinfo;ncursesw'
-- Configuring done (9.0s)
-- Generating done (0.4s)
-- Build files have been written to: /home/ci/asciicast2webp/build
+ cmake --build build -- package
[ 50%] Building CXX object CMakeFiles/asciicast2webp.dir/asciicast2webp.cpp.o
[100%] Linking CXX executable asciicast2webp
[100%] Built target asciicast2webp
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: asciicast2webp
CPack: - Install project: asciicast2webp []
CPack: Create package
CPack: - package: /home/ci/asciicast2webp/build/asciicast2webp-322d8af-Linux-aarch64.tar.gz generated.
+ doas sed -i -E 's/, (x11|xext|xrender|xcb(-render|-shm)?)( >= +[^,]+)?//g' /usr/lib/pkgconfig/cairo.pc
+ cmake -S . -B build-static '-DCMAKE_BUILD_TYPE=Release' '-DCMAKE_EXE_LINKER_FLAGS=-static -w' '-DCPACK_STRIP_FILES=YES' '-DCMAKE_INSTALL_PREFIX=/' '-DCMAKE_INSTALL_BINDIR=/' '-DCMAKE_INSTALL_MANDIR=/man' '-DCMAKE_INSTALL_DOCDIR=/doc'
-- The CXX compiler identification is GNU 15.2.0
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for modules 'vterm;cairo;libwebp;libwebpmux;libjq;oniguruma'
-- Found vterm, version 0.3.3
-- Found cairo, version 1.18.4
-- Found libwebp, version 1.6.0
-- Found libwebpmux, version 1.6.0
-- Found libjq, version 1.8.1
-- Found oniguruma, version 6.9.10
-- Checking for one of the modules 'tinfo;ncursesw'
-- Configuring done (7.4s)
-- Generating done (0.4s)
-- Build files have been written to: /home/ci/asciicast2webp/build-static
+ sed -i 's/"asciicast2webp-/&static-/' build-static/CPackConfig.cmake
+ cmake --build build-static -- package
[ 50%] Building CXX object CMakeFiles/asciicast2webp.dir/asciicast2webp.cpp.o
[100%] Linking CXX executable asciicast2webp
[100%] Built target asciicast2webp
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: asciicast2webp
CPack: - Install project: asciicast2webp []
CPack: Create package
CPack: - package: /home/ci/asciicast2webp/build-static/asciicast2webp-static-322d8af-Linux-aarch64.tar.gz generated.
+ cmake --build build-static -- test
Running tests...
Test project /home/ci/asciicast2webp/build-static
Start 1: fixture
1/3 Test #1: fixture .......................... Passed 0.56 sec
Start 2: fixture-drop-short
2/3 Test #2: fixture-drop-short ............... Passed 0.35 sec
Start 3: fixture-v3
3/3 Test #3: fixture-v3 ....................... Passed 0.34 sec
100% tests passed, 0 tests failed out of 3
Total Test time (real) = 1.32 sec
+ mv build-static/asciicast2webp-static-322d8af-Linux-aarch64.tar.gz /home/ci/acid-deploy
Deploy log
+ mv -- asciicast2webp-static-322d8af-Linux-aarch64.tar.gz /home/acid/cd