- Created
- 19d ago
- Changed
- 19d ago
- Project
- p/fiv
- Commit
- 6e80a3b5c8aaa408bb1333dfc2f7595d0772997b
- Runner
- Alpine 3.24
- State
- Failed (Scripts failed)
- Notified
- 1
- Duration
- 3m9s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.35-0-virt (buildozer@build-3-24-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-06-09 12:34:47
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 10866594667 cycles
[ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000005] tsc: Detected 3096.006 MHz processor
[ 0.000510] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000537] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000539] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000573] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007442] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007537] RAMDISK: [mem 0x7f5a7000-0x7fffffff]
[ 0.007538] ACPI: Early table checksum verification disabled
[ 0.007540] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007543] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007547] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007551] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007554] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007556] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007558] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007561] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007563] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007564] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007564] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007565] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007565] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007566] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.007973] No NUMA configuration found
[ 0.007974] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.007976] NODE_DATA(0) allocated [mem 0x13fffbd40-0x13fffffff]
[ 0.008084] Zone ranges:
[ 0.008084] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008085] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008086] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008087] Movable zone start for each node
[ 0.008088] Early memory node ranges
[ 0.008088] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.008089] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.008090] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008091] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.008173] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.008184] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013614] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.014250] ACPI: PM-Timer IO Port: 0x608
[ 0.014271] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.014303] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.014306] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014308] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.014308] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014309] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.014310] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.014313] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.014314] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014322] CPU topo: Max. logical packages: 1
[ 0.014322] CPU topo: Max. logical dies: 1
[ 0.014323] CPU topo: Max. dies per package: 1
[ 0.014326] CPU topo: Max. threads per core: 1
[ 0.014326] CPU topo: Num. cores per package: 4
[ 0.014327] CPU topo: Num. threads per package: 4
[ 0.014327] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.014342] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.014354] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.014354] Booting paravirtualized kernel on KVM
[ 0.014355] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.017917] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.018111] percpu: Embedded 55 pages/cpu s185752 r8192 d31336 u524288
[ 0.018133] kvm-guest: PV spinlocks disabled, no host support
[ 0.018134] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.018177] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4,ena,gve,mana", will be passed to user space.
[ 0.018181] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.018504] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.018668] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.018734] software IO TLB: area num 4.
[ 0.029481] Fallback order for Node 0: 0
[ 0.029486] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.029487] Policy zone: Normal
[ 0.029683] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.041637] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.041700] Kernel/User page tables isolation: enabled
[ 0.042404] Dynamic Preempt: none
[ 0.042552] rcu: Preemptible hierarchical RCU implementation.
[ 0.042552] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.042554] Trampoline variant of Tasks RCU enabled.
[ 0.042554] Tracing variant of Tasks RCU enabled.
[ 0.042554] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.042555] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.042561] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.042563] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.046523] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.046724] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.047027] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.053634] Console: colour VGA+ 80x25
[ 0.053637] printk: legacy console [tty0] enabled
[ 0.090787] printk: legacy console [ttyS0] enabled
[ 0.247175] ACPI: Core revision 20250807
[ 0.248551] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.251151] APIC: Switch to symmetric I/O mode setup
[ 0.252762] x2apic enabled
[ 0.253910] APIC: Switched APIC routing to: physical x2apic
[ 0.256444] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.258005] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.260680] Calibrating delay loop (skipped) preset value.. 6192.01 BogoMIPS (lpj=3096006)
[ 0.261759] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.263680] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.264682] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.266680] Speculative Store Bypass: Vulnerable
[ 0.268681] Spectre V2 : Mitigation: Retpolines
[ 0.269680] ITS: Mitigation: Aligned branch/return thunks
[ 0.270680] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.271680] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.273680] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.274681] active return thunk: its_return_thunk
[ 0.275681] x86/fpu: x87 FPU will use FXSAVE
[ 0.292150] Freeing SMP alternatives memory: 40K
[ 0.292683] pid_max: default: 32768 minimum: 301
[ 0.294979] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.296120] landlock: Up and running.
[ 0.296680] Yama: becoming mindful.
[ 0.297798] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.299682] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.405630] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.405842] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.407704] signal: max sigframe size: 1440
[ 0.408710] rcu: Hierarchical SRCU implementation.
[ 0.409680] rcu: Max phase no-delay instances is 400.
[ 0.411721] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.415738] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.417723] smp: Bringing up secondary CPUs ...
[ 0.419782] smpboot: x86: Booting SMP configuration:
[ 0.420682] .... node #0, CPUs: #1 #2 #3
[ 0.424709] smp: Brought up 1 node, 4 CPUs
[ 0.427680] smpboot: Total of 4 processors activated (24768.04 BogoMIPS)
[ 0.428932] Memory: 3999204K/4193760K available (14650K kernel code, 2032K rwdata, 9844K rodata, 2996K init, 1168K bss, 189420K reserved, 0K cma-reserved)
[ 0.429955] devtmpfs: initialized
[ 0.430713] x86/mm: Memory block size: 128MB
[ 0.432947] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.434685] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.435686] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.438146] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.438810] audit: initializing netlink subsys (disabled)
[ 0.439695] audit: type=2000 audit(1785888240.677:1): state=initialized audit_enabled=0 res=1
[ 0.439733] thermal_sys: Registered thermal governor 'step_wise'
[ 0.441690] cpuidle: using governor ladder
[ 0.444685] cpuidle: using governor menu
[ 0.445803] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.446939] PCI: Using configuration type 1 for base access
[ 0.447757] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.449719] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.450681] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.452727] ACPI: Added _OSI(Module Device)
[ 0.453681] ACPI: Added _OSI(Processor Device)
[ 0.454681] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.457415] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.460053] ACPI: Interpreter enabled
[ 0.460690] ACPI: PM: (supports S0 S3 S5)
[ 0.462680] ACPI: Using IOAPIC for interrupt routing
[ 0.463695] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.465680] PCI: Using E820 reservations for host bridge windows
[ 0.467782] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.472154] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.473685] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.476682] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.478687] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.482841] acpiphp: Slot [3] registered
[ 0.483701] acpiphp: Slot [4] registered
[ 0.484700] acpiphp: Slot [5] registered
[ 0.486702] acpiphp: Slot [6] registered
[ 0.487700] acpiphp: Slot [7] registered
[ 0.488701] acpiphp: Slot [8] registered
[ 0.489700] acpiphp: Slot [9] registered
[ 0.490703] acpiphp: Slot [10] registered
[ 0.492702] acpiphp: Slot [11] registered
[ 0.493557] acpiphp: Slot [12] registered
[ 0.494700] acpiphp: Slot [13] registered
[ 0.495701] acpiphp: Slot [14] registered
[ 0.496700] acpiphp: Slot [15] registered
[ 0.497700] acpiphp: Slot [16] registered
[ 0.499704] acpiphp: Slot [17] registered
[ 0.500553] acpiphp: Slot [18] registered
[ 0.501703] acpiphp: Slot [19] registered
[ 0.502701] acpiphp: Slot [20] registered
[ 0.503700] acpiphp: Slot [21] registered
[ 0.504700] acpiphp: Slot [22] registered
[ 0.506700] acpiphp: Slot [23] registered
[ 0.507700] acpiphp: Slot [24] registered
[ 0.508703] acpiphp: Slot [25] registered
[ 0.509715] acpiphp: Slot [26] registered
[ 0.511702] acpiphp: Slot [27] registered
[ 0.512686] acpiphp: Slot [28] registered
[ 0.513713] acpiphp: Slot [29] registered
[ 0.514701] acpiphp: Slot [30] registered
[ 0.516705] acpiphp: Slot [31] registered
[ 0.517708] PCI host bridge to bus 0000:00
[ 0.518683] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.520681] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.522680] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.524680] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.527682] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.529681] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.530741] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.534481] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.538012] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.541741] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.543772] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.545680] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.547680] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.549680] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.551929] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.555777] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.557694] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.560930] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.565723] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.568680] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.569742] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.572822] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.575831] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.579694] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.581694] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.583730] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.585695] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.589955] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.594522] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.596680] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.597734] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.601764] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.609573] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.611695] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.612730] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.618974] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.620797] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.622792] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.624788] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.626750] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.628907] iommu: Default domain type: Translated
[ 0.630680] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.632833] SCSI subsystem initialized
[ 0.633781] pps_core: LinuxPPS API ver. 1 registered
[ 0.635680] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.637683] PTP clock support registered
[ 0.640001] PCI: Using ACPI for IRQ routing
[ 0.640873] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.642717] clocksource: Switched to clocksource kvm-clock
[ 0.644700] VFS: Disk quotas dquot_6.6.0
[ 0.645954] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.648103] pnp: PnP ACPI init
[ 0.649428] pnp: PnP ACPI: found 6 devices
[ 0.656773] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.659814] NET: Registered PF_INET protocol family
[ 0.661656] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.672393] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.674901] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.677247] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.679686] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.681918] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.683907] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.686037] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.687999] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.690132] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.691784] NET: Registered PF_XDP protocol family
[ 0.693221] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.695000] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.696813] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.698808] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.700791] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.702852] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.704562] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.706375] PCI: CLS 0 bytes, default 64
[ 0.707617] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.707681] Unpacking initramfs...
[ 0.707966] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.712768] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.715931] Initialise system trusted keyrings
[ 0.717422] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.724718] Key type asymmetric registered
[ 0.725993] Asymmetric key parser 'x509' registered
[ 0.727548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.729943] io scheduler mq-deadline registered
[ 0.731483] io scheduler kyber registered
[ 0.732725] io scheduler bfq registered
[ 0.734534] ERST DBG: ERST support is disabled.
[ 0.736431] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.739662] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.750279] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.753271] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.755333] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.761350] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.763994] scsi host0: ata_piix
[ 0.765293] scsi host1: ata_piix
[ 0.766434] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.768722] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.771046] hv_vmbus: registering driver hv_netvsc
[ 0.772847] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.776102] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.777573] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.779027] hv_vmbus: registering driver hyperv_keyboard
[ 0.780630] rtc_cmos 00:05: RTC can wake from S4
[ 0.782691] rtc_cmos 00:05: registered as rtc0
[ 0.783273] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.784404] rtc_cmos 00:05: setting system clock to 2026-08-05T00:04:00 UTC (1785888240)
[ 0.788587] Freeing initrd memory: 10596K
[ 0.789555] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.792761] intel_pstate: CPU model not supported
[ 0.794279] gre: GRE over IPv4 demultiplexer driver
[ 0.795762] NET: Registered PF_INET6 protocol family
[ 0.797714] Segment Routing with IPv6
[ 0.798814] In-situ OAM (IOAM) with IPv6
[ 0.800179] Key type dns_resolver registered
[ 0.801516] IPI shorthand broadcast: enabled
[ 0.804008] sched_clock: Marking stable (597014639, 206947119)->(837014829, -33053071)
[ 0.806718] registered taskstats version 1
[ 0.808149] Loading compiled-in X.509 certificates
[ 0.812753] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.817031] Demotion targets for Node 0: null
[ 0.818483] Key type .fscrypt registered
[ 0.819614] Key type fscrypt-provisioning registered
[ 0.927780] ata2: found unknown device (class 0)
[ 0.935509] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.946395] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.977035] Freeing unused kernel image (initmem) memory: 2996K
[ 0.983680] Write protecting the kernel read-only data: 26624k
[ 0.993566] Freeing unused kernel image (text/rodata gap) memory: 1732K
[ 1.000814] Freeing unused kernel image (rodata/data gap) memory: 396K
[ 1.007632] rodata_test: all tests were successful
[ 1.011421] Run /init as init process
[ 1.027244] Alpine Init 3.14.0-r0
[ 1.029462] Loading boot drivers...
[ 1.050658] ACPI: bus type USB registered
[ 1.052176] usbcore: registered new interface driver usbfs
[ 1.053931] usbcore: registered new interface driver hub
[ 1.055574] usbcore: registered new device driver usb
[ 1.060164] usbcore: registered new interface driver usb-storage
[ 1.121186] loop: module loaded
[ 1.150425] ACPI: bus type drm_connector registered
[ 1.170725] Loading boot drivers: ok.
[ 1.173646] Mounting root...
[ 1.195021] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.197236] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.205199] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.206685] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.208897] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.222714] Console: switching to colour frame buffer device 160x50
[ 1.225188] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.262830] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.294685] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.344848] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.353341] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.358711] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.363802] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.407924] block sr0: the capability attribute has been deprecated.
[ 1.954352] EXT4-fs (vda): mounted filesystem 7af5430b-f94c-484c-8fe6-36878b6de03a ro with ordered data mode. Quota mode: none.
[ 1.964018] Mounting root: ok.
[ 2.487963] random: crng init done
Welcome to Alpine Linux 3.24
Kernel 6.18.35-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.6-r0 -> 3.0.7-r0)
(2/2) Upgrading apk-tools (3.0.6-r0 -> 3.0.7-r0)
Executing busybox-1.37.0-r31.trigger
Continuing with the main upgrade transaction:
( 1/17) Upgrading libblkid (2.42-r0 -> 2.42.1-r0)
( 2/17) Upgrading blkid (2.42-r0 -> 2.42.1-r0)
( 3/17) Upgrading libsmartcols (2.42-r0 -> 2.42.1-r0)
( 4/17) Upgrading partx (2.42-r0 -> 2.42.1-r0)
( 5/17) Upgrading libuuid (2.42-r0 -> 2.42.1-r0)
( 6/17) Upgrading libfdisk (2.42-r0 -> 2.42.1-r0)
( 7/17) Upgrading sfdisk (2.42-r0 -> 2.42.1-r0)
( 8/17) Upgrading libexpat (2.8.1-r0 -> 2.8.2-r0)
( 9/17) Upgrading py3-charset-normalizer (3.4.7-r0 -> 3.4.9-r0)
(10/17) Upgrading py3-charset-normalizer-pyc (3.4.7-r0 -> 3.4.9-r0)
(11/17) Upgrading tzdata (2026b-r0 -> 2026c-r0)
(12/17) Upgrading device-mapper-libs (2.03.35-r2 -> 2.03.35-r3)
(13/17) Upgrading linux-virt (6.18.35-r0 -> 6.18.41-r0)
(14/17) Upgrading libmount (2.42-r0 -> 2.42.1-r0)
(15/17) Upgrading mount (2.42-r0 -> 2.42.1-r0)
(16/17) Upgrading libnvmemi (1.16.1-r1 -> 1.16.2-r0)
(17/17) Upgrading libnvme (1.16.1-r1 -> 1.16.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.14.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.41-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 131.3 MiB in 201 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/12) Installing brotli-libs (1.2.0-r1)
( 2/12) Installing c-ares (1.34.8-r0)
( 3/12) Installing libunistring (1.4.2-r0)
( 4/12) Installing libidn2 (2.3.8-r0)
( 5/12) Installing nghttp2-libs (1.69.0-r0)
( 6/12) Installing libpsl (0.21.5-r3)
( 7/12) Installing libcurl (8.21.0-r0)
( 8/12) Installing pcre2 (10.47-r1)
( 9/12) Installing git (2.54.0-r0)
(10/12) Installing git-init-template (2.54.0-r0)
(11/12) Installing gnu-libiconv-libs (1.18-r0)
(12/12) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r31.trigger
OK: 143.9 MiB in 213 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/fiv.git fiv
Cloning into 'fiv'...
remote: Enumerating objects: 2628, done.
remote: Counting objects: 100% (2485/2485), done.
remote: Compressing objects: 100% (749/749), done.
remote: Total 2628 (delta 1735), reused 2468 (delta 1725), pack-reused 143 (from 1)
Receiving objects: 100% (2628/2628), 1.55 MiB | 27.83 MiB/s, done.
Resolving deltas: 100% (1826/1826), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'submodules/liberty'
Submodule 'wuffs-mirror-release-c' (https://github.com/google/wuffs-mirror-release-c) registered for path 'submodules/wuffs-mirror-release-c'
Cloning into '/home/ci/fiv/submodules/liberty'...
remote: Enumerating objects: 936, done.
remote: Counting objects: 100% (405/405), done.
remote: Compressing objects: 100% (402/402), done.
remote: Total 936 (delta 259), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (936/936), 456.03 KiB | 20.73 MiB/s, done.
Resolving deltas: 100% (580/580), done.
Cloning into '/home/ci/fiv/submodules/wuffs-mirror-release-c'...
remote: Enumerating objects: 252, done.
remote: Counting objects: 100% (42/42), done.
remote: Compressing objects: 100% (17/17), done.
remote: Total 252 (delta 24), reused 33 (delta 18), pack-reused 210 (from 1)
Receiving objects: 100% (252/252), 3.20 MiB | 3.15 MiB/s, done.
Resolving deltas: 100% (147/147), done.
Submodule path 'submodules/liberty': checked out '0e86ffe7c30a4d52eea35856b792567ca1040f56'
Submodule path 'submodules/wuffs-mirror-release-c': checked out '7411f488fe2e2c205c3d3b3d28638b7356522930'
+ cd fiv
+ git -c 'advice.detachedHead=false' checkout 6e80a3b5c8aaa408bb1333dfc2f7595d0772997b
HEAD is now at 6e80a3b Extract a function
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=1.0.0-21-g6e80a3b
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/1.0.0-21-g6e80a3b/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base meson asciidoctor gtk+3.0-dev libwebp-dev lcms2-dev libraw-dev libheif-dev tiff-dev librsvg-dev libjpeg-turbo-dev perl-image-exiftool
( 1/227) Installing gmp (6.3.0-r4)
( 2/227) Installing ruby-libs (3.4.9-r0)
( 3/227) Installing libucontext (1.5.1-r0)
( 4/227) Installing ruby (3.4.9-r0)
( 5/227) Installing asciidoctor (2.0.26-r0)
( 6/227) Installing jansson (2.15.0-r0)
( 7/227) Installing binutils (2.45.1-r1)
( 8/227) Installing libmagic (5.47-r2)
( 9/227) Installing file (5.47-r2)
( 10/227) Installing libgcc-static (15.2.0-r5)
( 11/227) Installing libgomp (15.2.0-r5)
( 12/227) Installing libatomic (15.2.0-r5)
( 13/227) Installing isl26 (0.26-r2)
( 14/227) Installing mpfr4 (4.2.2-r0)
( 15/227) Installing mpc1 (1.3.1-r1)
( 16/227) Installing gcc (15.2.0-r5)
( 17/227) Installing libstdc++-dev (15.2.0-r5)
( 18/227) Installing musl-dev (1.2.6-r2)
( 19/227) Installing g++ (15.2.0-r5)
( 20/227) Installing make (4.4.1-r4)
( 21/227) Installing fortify-headers (3.0.1-r2)
( 22/227) Installing patch (2.8-r0)
( 23/227) Installing build-base (0.5-r4)
( 24/227) Installing pkgconf (2.5.1-r0)
( 25/227) Installing libintl (1.0-r0)
( 26/227) Installing glib (2.88.1-r1)
( 27/227) Installing libxml2 (2.13.9-r2)
( 28/227) Installing shared-mime-info (2.4-r7)
( 29/227) Installing bubblewrap (0.11.2-r0)
( 30/227) Installing libpng (1.6.58-r1)
( 31/227) Installing freetype (2.14.3-r0)
( 32/227) Installing fontconfig (2.17.1-r1)
( 33/227) Installing lcms2 (2.19-r0)
( 34/227) Installing libglycin (2.1.5-r0)
Executing libglycin-2.1.5-r0.post-install
* glycin loaders got split into their individual subpackages.
* By default, only glycin-image-rs & glycin-svg are installed.
* Additional loader subpackages are glycin-heif, glycin-jxl & glycin-raw.
*
* To install all available loaders, install glycin-loaders-all.
*
* Also the glycin-thumbnailer got subpackaged and isn't installed by default.
( 35/227) Installing glycin-image-rs (2.1.5-r0)
( 36/227) Installing libxau (1.0.12-r0)
( 37/227) Installing libxdmcp (1.1.5-r1)
( 38/227) Installing libxcb (1.17.0-r2)
( 39/227) Installing libx11 (1.8.13-r0)
( 40/227) Installing libxext (1.3.7-r0)
( 41/227) Installing libxrender (0.9.12-r0)
( 42/227) Installing pixman (0.46.4-r0)
( 43/227) Installing cairo (1.18.4-r1)
( 44/227) Installing libdav1d (1.5.3-r0)
( 45/227) Installing libxft (2.3.9-r0)
( 46/227) Installing fribidi (1.0.16-r3)
( 47/227) Installing graphite2 (1.3.14-r6)
( 48/227) Installing harfbuzz (13.2.1-r0)
( 49/227) Installing pango (1.57.1-r0)
( 50/227) Installing librsvg (2.62.3-r0)
( 51/227) Installing glycin-svg (2.1.5-r0)
( 52/227) Installing gdk-pixbuf (2.44.7-r1)
( 53/227) Installing bzip2-dev (1.0.8-r6)
( 54/227) Installing libxml2-utils (2.13.9-r2)
( 55/227) Installing docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.post-install
( 56/227) Installing libxslt (1.1.43-r3)
( 57/227) Installing docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.post-install
( 58/227) Installing docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.post-install
( 59/227) Installing docbook-xsl (1.79.2-r13)
( 60/227) Installing xz (5.8.3-r0)
( 61/227) Installing gettext-asprintf (1.0-r0)
( 62/227) Installing gettext-libs (1.0-r0)
( 63/227) Installing gettext-envsubst (1.0-r0)
( 64/227) Installing gettext (1.0-r0)
( 65/227) Installing gettext-dev (1.0-r0)
( 66/227) Installing py3-parsing (3.3.2-r1)
( 67/227) Installing py3-parsing-pyc (3.3.2-r1)
( 68/227) Installing py3-packaging (26.2-r0)
( 69/227) Installing py3-packaging-pyc (26.2-r0)
( 70/227) Installing linux-headers (7.0.0-r1)
( 71/227) Installing libffi-dev (3.5.2-r1)
( 72/227) Installing bsd-compat-headers (0.7.2-r6)
( 73/227) Installing libformw (6.6_p20260516-r0)
( 74/227) Installing libmenuw (6.6_p20260516-r0)
( 75/227) Installing libncurses++ (6.6_p20260516-r0)
( 76/227) Installing ncurses-dev (6.6_p20260516-r0)
( 77/227) Installing libedit-dev (20260508.3.1-r1)
( 78/227) Installing zlib-dev (1.3.2-r0)
( 79/227) Installing libpcre2-16 (10.47-r1)
( 80/227) Installing libpcre2-32 (10.47-r1)
( 81/227) Installing pcre2-dev (10.47-r1)
( 82/227) Installing liblastlog2 (2.42.1-r0)
( 83/227) Installing sqlite (3.53.2-r0)
( 84/227) Installing sqlite-dev (3.53.2-r0)
( 85/227) Installing util-linux-dev (2.42.1-r0)
( 86/227) Installing glib-dev (2.88.1-r1)
( 87/227) Installing expat (2.8.2-r0)
( 88/227) Installing expat-dev (2.8.2-r0)
( 89/227) Installing brotli (1.2.0-r1)
( 90/227) Installing brotli-dev (1.2.0-r1)
( 91/227) Installing libpng-dev (1.6.58-r1)
( 92/227) Installing freetype-dev (2.14.3-r0)
( 93/227) Installing fontconfig-dev (2.17.1-r1)
( 94/227) Installing lcms2-plugins (2.19-r0)
( 95/227) Installing libjpeg-turbo (3.1.3-r0)
( 96/227) Installing libturbojpeg (3.1.3-r0)
( 97/227) Installing libjpeg-turbo-dev (3.1.3-r0)
( 98/227) Installing libsharpyuv (1.6.0-r0)
( 99/227) Installing libwebp (1.6.0-r0)
(100/227) Installing tiff (4.7.1-r0)
(101/227) Installing libtiffxx (4.7.1-r0)
(102/227) Installing libwebpdecoder (1.6.0-r0)
(103/227) Installing libwebpdemux (1.6.0-r0)
(104/227) Installing libwebpmux (1.6.0-r0)
(105/227) Installing libwebp-dev (1.6.0-r0)
(106/227) Installing zstd (1.5.7-r2)
(107/227) Installing zstd-dev (1.5.7-r2)
(108/227) Installing tiff-dev (4.7.1-r0)
(109/227) Installing lcms2-dev (2.19-r0)
(110/227) Installing libseccomp-dev (2.6.0-r2)
(111/227) Installing libglycin-dev (2.1.5-r0)
(112/227) Installing gdk-pixbuf-dev (2.44.7-r1)
(113/227) Installing xorgproto (2025.1-r0)
(114/227) Installing libxau-dev (1.0.12-r0)
(115/227) Installing xcb-proto (1.17.0-r1)
(116/227) Installing xcb-proto-pyc (1.17.0-r1)
(117/227) Installing libxdmcp-dev (1.1.5-r1)
(118/227) Installing libxcb-dev (1.17.0-r2)
(119/227) Installing xtrans (1.6.0-r0)
(120/227) Installing libx11-dev (1.8.13-r0)
(121/227) Installing libepoxy (1.5.10-r1)
(122/227) Installing hwdata-pci (0.408-r0)
(123/227) Installing libpciaccess (0.19-r0)
(124/227) Installing libdrm (2.4.134-r0)
(125/227) Installing libpciaccess-dev (0.19-r0)
(126/227) Installing libdrm-dev (2.4.134-r0)
(127/227) Installing libxdamage (1.1.7-r0)
(128/227) Installing libxfixes (6.0.2-r0)
(129/227) Installing libxfixes-dev (6.0.2-r0)
(130/227) Installing libxdamage-dev (1.1.7-r0)
(131/227) Installing libxshmfence (1.3.3-r0)
(132/227) Installing libxshmfence-dev (1.3.3-r0)
(133/227) Installing llvm22-libs (22.1.3-r0)
(134/227) Installing spirv-tools (1.4.341.0-r0)
(135/227) Installing mesa (26.1.6-r0)
(136/227) Installing mesa-gles (26.1.6-r0)
(137/227) Installing mesa-gbm (26.1.6-r0)
(138/227) Installing wayland-libs-client (1.25.0-r0)
(139/227) Installing mesa-egl (26.1.6-r0)
(140/227) Installing libxxf86vm (1.1.7-r0)
(141/227) Installing mesa-gl (26.1.6-r0)
(142/227) Installing clang22-headers (22.1.3-r2)
(143/227) Installing libclc (22.1.3-r0)
(144/227) Installing spirv-llvm-translator-libs (22.1.0-r0)
(145/227) Installing clang22-libs (22.1.3-r2)
(146/227) Installing mesa-rusticl (26.1.6-r0)
(147/227) Installing libxext-dev (1.3.7-r0)
(148/227) Installing libxxf86vm-dev (1.1.7-r0)
(149/227) Installing mesa-dev (26.1.6-r0)
(150/227) Installing libepoxy-dev (1.5.10-r1)
(151/227) Installing libxi (1.8.3-r0)
(152/227) Installing libxi-dev (1.8.3-r0)
(153/227) Installing libxinerama (1.1.6-r0)
(154/227) Installing libxinerama-dev (1.1.6-r0)
(155/227) Installing xkeyboard-config (2.47-r0)
(156/227) Installing libxkbcommon (1.13.1-r0)
(157/227) Installing libxkbcommon-x11 (1.13.1-r0)
(158/227) Installing xz-dev (5.8.3-r0)
(159/227) Installing libxml2-dev (2.13.9-r2)
(160/227) Installing libxkbcommon-dev (1.13.1-r0)
(161/227) Installing wayland-libs-cursor (1.25.0-r0)
(162/227) Installing wayland-protocols (1.48-r0)
(163/227) Installing gobject-introspection (1.86.0-r1)
(164/227) Installing libxcomposite (0.4.7-r0)
(165/227) Installing libxcursor (1.2.3-r0)
(166/227) Installing libxrandr (1.5.5-r0)
(167/227) Installing libatk-1.0 (2.60.5-r0)
(168/227) Installing dbus-libs (1.16.2-r2)
(169/227) Installing at-spi2-core-libs (2.60.5-r0)
(170/227) Installing libxtst (1.2.5-r0)
(171/227) Installing at-spi2-core (2.60.5-r0)
(172/227) Installing libatk-bridge-2.0 (2.60.5-r0)
(173/227) Installing cairo-gobject (1.18.4-r1)
(174/227) Installing avahi-libs (0.9_rc4-r0)
(175/227) Installing nettle (3.10.2-r0)
(176/227) Installing libtasn1 (4.21.0-r0)
(177/227) Installing p11-kit (0.26.2-r0)
(178/227) Installing gnutls (3.8.13-r0)
(179/227) Installing cups-libs (2.4.19-r0)
(180/227) Installing wayland-libs-egl (1.25.0-r0)
(181/227) Installing gtk+3.0 (3.24.52-r0)
(182/227) Installing dbus-dev (1.16.2-r2)
(183/227) Installing libxtst-dev (1.2.5-r0)
(184/227) Installing at-spi2-core-dev (2.60.5-r0)
(185/227) Installing cairo-tools (1.18.4-r1)
(186/227) Installing pixman-dev (0.46.4-r0)
(187/227) Installing libxrender-dev (0.9.12-r0)
(188/227) Installing cairo-dev (1.18.4-r1)
(189/227) Installing fribidi-dev (1.0.16-r3)
(190/227) Installing pango-tools (1.57.1-r0)
(191/227) Installing harfbuzz-cairo (13.2.1-r0)
(192/227) Installing harfbuzz-gobject (13.2.1-r0)
(193/227) Installing icu-data-en (78.1-r0)
Executing icu-data-en-78.1-r0.post-install
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
(194/227) Installing icu-libs (78.1-r0)
(195/227) Installing harfbuzz-icu (13.2.1-r0)
(196/227) Installing harfbuzz-subset (13.2.1-r0)
(197/227) Installing graphite2-dev (1.3.14-r6)
(198/227) Installing icu (78.1-r0)
(199/227) Installing icu-dev (78.1-r0)
(200/227) Installing harfbuzz-dev (13.2.1-r0)
(201/227) Installing libxft-dev (2.3.9-r0)
(202/227) Installing pango-dev (1.57.1-r0)
(203/227) Installing wayland-libs-server (1.25.0-r0)
(204/227) Installing wayland-dev (1.25.0-r0)
(205/227) Installing libxcomposite-dev (0.4.7-r0)
(206/227) Installing libxcursor-dev (1.2.3-r0)
(207/227) Installing libxrandr-dev (1.5.5-r0)
(208/227) Installing gtk+3.0-dev (3.24.52-r0)
(209/227) Installing libheif-dav1d (1.23.0-r0)
(210/227) Installing libde265 (1.0.18-r0)
(211/227) Installing libheif-libde265 (1.23.0-r0)
(212/227) Installing libheif (1.23.0-r0)
Executing libheif-1.23.0-r0.post-install
*
* libheif installs only basic HEIC/HEVC and AVIF/AV1 *decoders* by default.
* If you want to encode (edit) HEIC and AVIF images, you may need to install
* libheif-x265 and libheif-rav1e (or libheif-aom), respectively. You can also
* install libheif-plugins-all to get all encoders and decoders.
*
(213/227) Installing libheif-jpeg (1.23.0-r0)
(214/227) Installing libheif-dev (1.23.0-r0)
(215/227) Installing libraw (0.22.1-r0)
(216/227) Installing libraw-dev (0.22.1-r0)
(217/227) Installing rsvg-convert (2.62.3-r0)
(218/227) Installing dav1d-dev (1.5.3-r0)
(219/227) Installing librsvg-dev (2.62.3-r0)
(220/227) Installing samurai (1.2-r8)
(221/227) Installing meson (1.11.1-r0)
(222/227) Installing meson-pyc (1.11.1-r0)
(223/227) Installing perl (5.42.2-r0)
(224/227) Installing perl-error (0.17030-r0)
(225/227) Installing perl-git (2.54.0-r0)
(226/227) Installing git-perl (2.54.0-r0)
(227/227) Installing perl-image-exiftool (13.55-r0)
Executing busybox-1.37.0-r31.trigger
Executing glib-2.88.1-r1.trigger
Executing shared-mime-info-2.4-r7.trigger
Executing gdk-pixbuf-2.44.7-r1.trigger
Executing gtk+3.0-3.24.52-r0.trigger
OK: 1115.8 MiB in 440 packages
+ doas apk add --no-interactive mingw-w64-gcc i686-mingw-w64-gcc coreutils rsvg-convert icoutils msitools meson pkgconf glib-dev gtk-update-icon-cache wine curl libarchive-tools ncurses
( 1/75) Installing coreutils-env (9.11-r0)
( 2/75) Installing coreutils-fmt (9.11-r0)
( 3/75) Installing coreutils-sha512sum (9.11-r0)
( 4/75) Installing acl-libs (2.3.2-r1)
( 5/75) Installing libattr (2.5.2-r2)
( 6/75) Installing coreutils (9.11-r0)
( 7/75) Installing curl (8.21.0-r0)
( 8/75) Installing hicolor-icon-theme (0.18-r0)
( 9/75) Installing gtk-update-icon-cache (3.24.52-r0)
(10/75) Installing i686-mingw-w64-binutils (2.45.1-r0)
(11/75) Installing i686-mingw-w64-crt (14.0.0-r0)
(12/75) Installing i686-mingw-w64-headers (14.0.0-r0)
(13/75) Installing i686-mingw-w64-winpthreads (14.0.0-r0)
(14/75) Installing i686-mingw-w64-gcc (15.2.0-r0)
(15/75) Installing perl-http-date (6.06-r0)
(16/75) Installing perl-clone (0.50-r0)
(17/75) Installing perl-mime-base32 (1.303-r3)
(18/75) Installing perl-mime-base64 (3.16-r7)
(19/75) Installing perl-uri (5.34-r0)
(20/75) Installing perl-io-html (1.004-r1)
(21/75) Installing perl-encode-locale (1.05-r5)
(22/75) Installing perl-lwp-mediatypes (6.04-r3)
(23/75) Installing perl-http-message (7.02-r0)
(24/75) Installing perl-http-cookies (6.11-r0)
(25/75) Installing perl-net-http (6.24-r0)
(26/75) Installing perl-html-tagset (3.24-r0)
(27/75) Installing perl-html-parser (3.85-r0)
(28/75) Installing perl-file-listing (6.16-r0)
(29/75) Installing perl-www-robotrules (6.02-r5)
(30/75) Installing perl-http-negotiate (6.01-r5)
(31/75) Installing perl-try-tiny (0.32-r0)
(32/75) Installing perl-libwww (6.83-r0)
(33/75) Installing icoutils (0.32.3-r4)
(34/75) Installing lz4-libs (1.10.0-r1)
(35/75) Installing libarchive-tools (3.8.7-r0)
(36/75) Installing mingw-w64-binutils (2.45.1-r0)
(37/75) Installing mingw-w64-crt (14.0.0-r0)
(38/75) Installing mingw-w64-headers (14.0.0-r0)
(39/75) Installing mingw-w64-winpthreads (14.0.0-r0)
(40/75) Installing mingw-w64-gcc (15.2.0-r0)
(41/75) Installing libgcab (1.6-r1)
(42/75) Installing libgsf (1.14.58-r0)
(43/75) Installing msitools (0.106-r0)
(44/75) Installing ncurses (6.6_p20260516-r0)
(45/75) Installing opencl (2026.05.29-r0)
(46/75) Installing alsa-lib (1.2.15.3-r0)
(47/75) Installing libexif (0.6.26-r0)
(48/75) Installing libltdl (2.6.0-r1)
(49/75) Installing libusb (1.0.30-r0)
(50/75) Installing libgphoto2 (2.5.33-r1)
Executing libgphoto2-2.5.33-r1.pre-install
(51/75) Installing libxv (1.0.13-r0)
(52/75) Installing cdparanoia-libs (10.2-r14)
(53/75) Installing graphene (1.10.8-r5)
(54/75) Installing gstreamer (1.28.3-r0)
(55/75) Installing gstreamer-ptp-helper (1.28.3-r0)
(56/75) Installing libogg (1.3.6-r0)
(57/75) Installing opus (1.6.1-r0)
(58/75) Installing orc (0.4.41-r0)
(59/75) Installing libtheora (1.2.0-r1)
(60/75) Installing libvorbis (1.3.7-r2)
(61/75) Installing gst-plugins-base (1.28.3-r0)
(62/75) Installing libpcap (1.10.6-r1)
(63/75) Installing pcsc-lite-libs (2.4.0-r4)
(64/75) Installing libasyncns (0.8-r5)
(65/75) Installing libflac (1.4.3-r2)
(66/75) Installing lame-libs (3.100-r5)
(67/75) Installing mpg123-libs (1.33.5-r0)
(68/75) Installing libsndfile (1.2.2-r2)
(69/75) Installing soxr (0.1.3-r7)
(70/75) Installing speexdsp (1.2.1-r2)
(71/75) Installing tdb-libs (1.4.15-r1)
(72/75) Installing libpulse (17.0-r7)
(73/75) Installing sane (1.4.0-r4)
Executing sane-1.4.0-r4.pre-install
(74/75) Installing eudev-libs (3.2.14-r6)
(75/75) Installing wine (11.0-r0)
Executing busybox-1.37.0-r31.trigger
Executing gtk-update-icon-cache-3.24.52-r0.trigger
OK: 2548.9 MiB in 515 packages
+ meson rewrite kwargs set project / version 1.0.0-21-g6e80a3b
+ meson setup build
The Meson build system
Version: 1.11.1
Source dir: /home/ci/fiv
Build dir: /home/ci/fiv/build
Build type: native build
Project name: fiv
Project version: 1.0.0-21-g6e80a3b
C compiler for the host machine: cc (gcc 15.2.0 "cc (Alpine 15.2.0) 15.2.0")
C linker for the host machine: cc ld.bfd 2.45.1
Host machine cpu family: x86_64
Host machine cpu: x86_64
Compiler for C supports arguments -Wno-cast-function-type: YES
Found pkg-config: YES (/usr/bin/pkg-config) 2.5.1
Did not find CMake 'cmake'
Found CMake: NO
Run-time dependency libjpegqs found: NO (tried pkg-config and cmake)
Looking for a fallback subproject for the dependency libjpegqs
Downloading libjpegqs source from https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: CA cert does not include key usage extension (_ssl.c:1081)>
WARNING: failed to download with error: could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz; is the internet available?
If you believe the connection should be secure, but python cannot see the
correct SSL certificates, install https://truststore.readthedocs.io/ and
try again.. Trying after a delay...
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: CA cert does not include key usage extension (_ssl.c:1081)>
WARNING: failed to download with error: could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz; is the internet available?
If you believe the connection should be secure, but python cannot see the
correct SSL certificates, install https://truststore.readthedocs.io/ and
try again.. Trying after a delay...
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: CA cert does not include key usage extension (_ssl.c:1081)>
WARNING: failed to download with error: could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz; is the internet available?
If you believe the connection should be secure, but python cannot see the
correct SSL certificates, install https://truststore.readthedocs.io/ and
try again.. Trying after a delay...
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: CA cert does not include key usage extension (_ssl.c:1081)>
WARNING: failed to download with error: could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz; is the internet available?
If you believe the connection should be secure, but python cannot see the
correct SSL certificates, install https://truststore.readthedocs.io/ and
try again.. Trying after a delay...
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: CA cert does not include key usage extension (_ssl.c:1081)>
WARNING: failed to download with error: could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz; is the internet available?
If you believe the connection should be secure, but python cannot see the
correct SSL certificates, install https://truststore.readthedocs.io/ and
try again.. Trying after a delay...
<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: CA cert does not include key usage extension (_ssl.c:1081)>
A fallback URL could be specified using source_fallback_url key in the wrap file
could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz; is the internet available?
If you believe the connection should be secure, but python cannot see the
correct SSL certificates, install https://truststore.readthedocs.io/ and
try again.
Subproject libjpegqs is buildable: NO (disabling)
Dependency libjpegqs for host machine from subproject libjpegqs found: NO (subproject failed to configure)
Run-time dependency lcms2 found: YES 2.19
Run-time dependency libraw found: YES 0.22.1
Run-time dependency librsvg-2.0 found: YES 2.62.3
Run-time dependency xcursor found: YES 1.2.3
Run-time dependency libheif found: YES 1.23.0
Run-time dependency libtiff-4 found: YES 4.7.1
Run-time dependency gdk-pixbuf-2.0 found: YES 2.44.7
Run-time dependency gtk+-3.0 found: YES 3.24.52
Run-time dependency pixman-1 found: YES 0.46.4
Run-time dependency epoxy found: YES 1.5.10
Run-time dependency libjpeg found: YES 3.1.3
Run-time dependency libturbojpeg found: YES 3.1.3
Run-time dependency libwebp found: YES 1.6.0
Run-time dependency libwebpdemux found: YES 1.6.0
Run-time dependency libwebpdecoder found: YES 1.6.0
Run-time dependency libwebpmux found: YES 1.6.0
Library m found: YES
Run-time dependency lcms2_fast_float found: NO (tried pkg-config and cmake)
Library lcms2_fast_float found: YES
Has header "lcms2_fast_float.h" : YES
Configuring config.h.in using configuration
Build-time dependency gio-2.0 found: YES 2.88.1
Program /usr/bin/glib-compile-resources found: YES (/usr/bin/glib-compile-resources)
Dependency gtk+-3.0 for host machine found: YES 3.24.52 (cached)
Dependency libturbojpeg for host machine found: YES 3.1.3 (cached)
Dependency gio-2.0 for build machine found: YES 2.88.1 (cached)
Program /usr/bin/glib-compile-schemas found: YES (/usr/bin/glib-compile-schemas)
Program sed found: YES (/bin/sed)
Program xmlwf found: YES (/usr/bin/xmlwf)
Program xmllint found: YES (/usr/bin/xmllint)
Program desktop-file-validate found: NO
Dependency gio-2.0 for build machine found: YES 2.88.1 (cached)
Program /usr/bin/glib-compile-schemas found: YES (/usr/bin/glib-compile-schemas)
Program gtk4-update-icon-cache found: YES (/usr/bin/gtk4-update-icon-cache)
Program asciidoctor found: YES (/usr/bin/asciidoctor)
Program a2x found: NO
Configuring name.janouch.fiv-reverse-search-google.desktop using configuration
Configuring name.janouch.fiv-reverse-search-bing.desktop using configuration
Configuring name.janouch.fiv-reverse-search-yandex.desktop using configuration
Configuring name.janouch.fiv-reverse-search-tineye.desktop using configuration
Configuring name.janouch.fiv-reverse-search-saucenao.desktop using configuration
Configuring name.janouch.fiv-reverse-search-iqdb.desktop using configuration
Configuring fiv-update-desktop-files using configuration
Configuring meta using configuration
Build targets in project: 11
fiv 1.0.0-21-g6e80a3b
Subprojects
libjpegqs: NO
could not get https://github.com/ilyakurdyukov/jpeg-quantsmooth/archive/refs/tags/1.20230818.tar.gz; is the internet available?
If you believe the connection should be secure, but python cannot see the
correct SSL certificates, install https://truststore.readthedocs.io/ and
try again.
Found ninja-1.9 at /usr/bin/ninja
+ meson compile -C build
INFO: autodetecting backend as ninja
INFO: calculating backend command to run: /usr/bin/ninja -C /home/ci/fiv/build
ninja: entering directory '/home/ci/fiv/build'
[1/22] Generating manpage for fiv with a custom command
[2/22] Compiling gschemas gsettings-compile
[3/22] Generating tiff-tables.h with a custom command (wrapped by meson to capture output)
[4/22] Generating resources_h with a custom command
[5/22] Generating resources_c with a custom command
[6/22] Generating config.h with a custom command
[7/22] Compiling C object fiv-jpegcrop.p/fiv-jpegcrop.c.o
[8/22] Compiling C object fiv.p/fiv-io-model.c.o
[9/22] Compiling C object fiv.p/fiv-collection.c.o
[10/22] Compiling C object fiv.p/fiv-thumbnail.c.o
[11/22] Compiling C object libfiv-io.a.p/xdg.c.o
[12/22] Compiling C object libfiv-io.a.p/fiv-io-cmm.c.o
[13/22] Compiling C object libfiv-io.a.p/fiv-io.c.o
[14/22] Compiling C object fiv.p/fiv-sidebar.c.o
[15/22] Compiling C object fiv.p/fiv-browser.c.o
[16/22] Compiling C object fiv.p/fiv-context-menu.c.o
[17/22] Compiling C object fiv.p/fiv-view.c.o
[18/22] Linking target fiv-jpegcrop
[19/22] Compiling C object fiv.p/fiv.c.o
[20/22] Compiling C object fiv.p/meson-generated_.._resources.c.o
In file included from ../fiv-io.c:85:
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function 'wuffs_adler32__hasher__alloc':
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:22298:46: warning: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
22298 | (wuffs_adler32__hasher*)(calloc(sizeof(wuffs_adler32__hasher), 1));
| ^~~~~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:22298:46: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function 'wuffs_bmp__decoder__alloc':
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:22823:43: warning: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
22823 | (wuffs_bmp__decoder*)(calloc(sizeof(wuffs_bmp__decoder), 1));
| ^~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:22823:43: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function 'wuffs_crc32__ieee_hasher__alloc':
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:28340:49: warning: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
28340 | (wuffs_crc32__ieee_hasher*)(calloc(sizeof(wuffs_crc32__ieee_hasher), 1));
| ^~~~~~~~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:28340:49: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function 'wuffs_deflate__decoder__alloc':
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:29045:47: warning: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
29045 | (wuffs_deflate__decoder*)(calloc(sizeof(wuffs_deflate__decoder), 1));
| ^~~~~~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:29045:47: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function 'wuffs_lzw__decoder__alloc':
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:31233:43: warning: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
31233 | (wuffs_lzw__decoder*)(calloc(sizeof(wuffs_lzw__decoder), 1));
| ^~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:31233:43: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function 'wuffs_gif__decoder__alloc':
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:31931:43: warning: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
31931 | (wuffs_gif__decoder*)(calloc(sizeof(wuffs_gif__decoder), 1));
| ^~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:31931:43: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function 'wuffs_zlib__decoder__alloc':
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:38345:44: warning: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
38345 | (wuffs_zlib__decoder*)(calloc(sizeof(wuffs_zlib__decoder), 1));
| ^~~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:38345:44: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function 'wuffs_png__decoder__alloc':
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:39210:43: warning: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
39210 | (wuffs_png__decoder*)(calloc(sizeof(wuffs_png__decoder), 1));
| ^~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:39210:43: note: earlier argument should specify number of elements, later size of each element
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c: In function 'wuffs_tga__decoder__alloc':
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:45290:43: warning: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
45290 | (wuffs_tga__decoder*)(calloc(sizeof(wuffs_tga__decoder), 1));
| ^~~~~~~~~~~~~~~~~~
../submodules/wuffs-mirror-release-c/release/c/wuffs-v0.3.c:45290:43: note: earlier argument should specify number of elements, later size of each element
../fiv-io.c: In function 'fiv_io_save_metadata':
../fiv-io.c:3571:46: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (11 chars into 10 available) [-Wunterminated-string-initialization]
3571 | uint8_t header[10] = "\xFF\xE1\000\000Exif\000\000";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../fiv-io.c:3589:46: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (19 chars into 18 available) [-Wunterminated-string-initialization]
3589 | uint8_t header[18] = "\xFF\xE2\000\000ICC_PROFILE\000\000\000";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../fiv-io.c:3610:33: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (34 chars into 33 available) [-Wunterminated-string-initialization]
3610 | "\xFF\xE1\000\000http://ns.adobe.com/xap/1.0/\000";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[21/22] Linking target fiv
[22/22] Linking static target libfiv-io.a
+ meson test -C build
ninja: nothing to do
ninja: entering directory '/home/ci/fiv/build'
1/28 fiv:xmlwf fiv.svg OK 0.01s
2/28 fiv:xmllint fiv.svg OK 0.01s
3/28 fiv:xmlwf fiv.manifest OK 0.01s
4/28 fiv:xmllint fiv.manifest OK 0.01s
5/28 fiv:xmlwf resources/resources.gresource.xml OK 0.01s
6/28 fiv:xmllint resources/resources.gresource.xml OK 0.01s
7/28 fiv:xmlwf fiv.gschema.xml OK 0.01s
8/28 fiv:xmllint fiv.gschema.xml OK 0.00s
9/28 fiv:xmlwf resources/text-symbolic.svg OK 0.01s
10/28 fiv:xmllint resources/text-symbolic.svg OK 0.01s
11/28 fiv:xmlwf resources/circle-filled-symbolic.svg OK 0.01s
12/28 fiv:xmllint resources/circle-filled-symbolic.svg OK 0.00s
13/28 fiv:xmlwf resources/cross-large-symbolic.svg OK 0.01s
14/28 fiv:xmllint resources/cross-large-symbolic.svg OK 0.01s
15/28 fiv:xmlwf resources/funnel-symbolic.svg OK 0.01s
16/28 fiv:xmllint resources/funnel-symbolic.svg OK 0.01s
17/28 fiv:xmlwf resources/blend-tool-symbolic.svg OK 0.01s
18/28 fiv:xmllint resources/blend-tool-symbolic.svg OK 0.01s
19/28 fiv:xmlwf resources/checkerboard-symbolic.svg OK 0.01s
20/28 fiv:xmllint resources/checkerboard-symbolic.svg OK 0.00s
21/28 fiv:xmlwf resources/heal-symbolic.svg OK 0.01s
22/28 fiv:xmllint resources/heal-symbolic.svg OK 0.01s
23/28 fiv:xmlwf resources/info-symbolic.svg OK 0.01s
24/28 fiv:xmllint resources/info-symbolic.svg OK 0.00s
25/28 fiv:xmlwf resources/pin2-symbolic.svg OK 0.01s
26/28 fiv:xmllint resources/pin2-symbolic.svg OK 0.01s
27/28 fiv:xmlwf resources/shapes-symbolic.svg OK 0.01s
28/28 fiv:xmllint resources/shapes-symbolic.svg OK 0.00s
Ok: 28
Fail: 0
Full log written to /home/ci/fiv/build/meson-logs/testlog.txt
+ sh -e ./msys2-configure.sh build-mingw64
-- Fetching repository DB
######################################################################### 100.0%
-- Resolving mingw-w64-x86_64-gtk3 mingw-w64-x86_64-lcms2 mingw-w64-x86_64-libraw mingw-w64-x86_64-libheif mingw-w64-x86_64-libjxl mingw-w64-x86_64-perl mingw-w64-x86_64-perl-win32-api mingw-w64-x86_64-libwinpthread-git
-- Fetching mingw-w64-x86_64-gtk3-3.24.52-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-pango-1.58.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-cairo-1.18.4-4-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-freetype-2.14.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-brotli-1.2.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-bzip2-1.0.8-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-gcc-libs-16.1.0-6-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libwinpthread-14.0.0.r220.gd999af622-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-tzdata-2026c-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libpng-1.6.58-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-zlib-1.3.2-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-harfbuzz-14.3.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-glib2-2.88.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-gettext-runtime-1.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libiconv-1.19-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libffi-3.7.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-pcre2-10.47-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-wineditline-2.208-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-python-3.14.6-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-tk-8.6.18-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-tcl-8.6.18-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libb2-0.98.1-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-xz-5.8.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-expat-2.8.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-mpdecimal-4.0.1-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-ncurses-6.6-4-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libsystre-1.0.2-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libtre-0.9.0-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-openssl-3.6.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-sqlite3-3.53.4-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-python-packaging-26.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-graphite2-1.3.15-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-fontconfig-2.18.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-lzo2-2.10-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-pixman-0.46.4-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-fribidi-1.0.16-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libthai-0.1.30-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libdatrie-0.2.14-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-shared-mime-info-2.5.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libxml2-2.15.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-gtk-update-icon-cache-3.24.52-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-gdk-pixbuf2-2.44.7-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libjpeg-turbo-3.2.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libtiff-4.7.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-jbigkit-2.1-5-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-lerc-4.1.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libdeflate-1.25-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libwebp-1.6.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-giflib-6.1.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-zstd-1.5.7-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-librsvg-2.62.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-hicolor-icon-theme-0.18-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-adwaita-icon-theme-50.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-adwaita-icon-theme-legacy-46.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-atk-2.60.5-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-json-glib-1.10.8-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libepoxy-1.5.10-7-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-egl-headers-1.5.r284.3ae2b7c-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-gles-headers-3.2.r1065.7fc154c-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-lcms2-2.19.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libraw-0.22.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libheif-1.23.1-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libx264-0.165.r3222.b35605a-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-openh264-2.6.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-openjpeg2-2.5.4-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-openjph-0.31.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-rav1e-0.8.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-svt-av1-4.2.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-SDL2-2.32.10-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-x265-4.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-aom-3.14.1-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-dav1d-1.5.4-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-kvazaar-2.3.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-crypto++-8.9.0-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libde265-1.1.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-libjxl-0.12.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-highway-1.4.0-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-openexr-3.4.13-4-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-imath-3.2.2-4-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-perl-5.44.0-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-perl-win32-api-0.84-12-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-perl-encode-compat-0.07-10-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-x86_64-perl-math-int64-0.57-7-any.pkg.tar.zst
######################################################################## 100.0%
######################################################################### 100.0%
-- Fetching Image-ExifTool-13.59.tar.gz
######################################################################### 100.0%
-- Verifying checksums
-- Extracting packages
bsdtar: Error opening archive: Unrecognized archive format
Process exited with status 1
Deploy log