- Created
- 18d ago
- Changed
- 18d ago
- Project
- p/json-rpc-shell
- Commit
- 0d245fcbae921a96b16fa53d37a95057a4c66fc2
- Runner
- Alpine 3.24
- State
- Success
- Notified
- 1
- Duration
- 50s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.35-0-virt (buildozer@build-3-24-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-06-09 12:34:47
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000018] kvm-clock: using sched offset of 10865715725 cycles
[ 0.000019] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000021] tsc: Detected 3096.006 MHz processor
[ 0.000502] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000528] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000531] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000565] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007663] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007857] RAMDISK: [mem 0x7f5a7000-0x7fffffff]
[ 0.007859] ACPI: Early table checksum verification disabled
[ 0.007862] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007865] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007869] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007874] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007876] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007878] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007881] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007883] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007885] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007886] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007886] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007887] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007887] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007888] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.008338] No NUMA configuration found
[ 0.008339] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.008341] NODE_DATA(0) allocated [mem 0x13fff8d40-0x13fffcfff]
[ 0.008362] Zone ranges:
[ 0.008362] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008364] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008365] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008365] Movable zone start for each node
[ 0.008366] Early memory node ranges
[ 0.008366] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.008367] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.008368] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008369] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.008453] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.008464] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.014345] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.014984] ACPI: PM-Timer IO Port: 0x608
[ 0.014998] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.015031] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.015034] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.015035] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.015036] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.015036] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.015037] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.015041] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.015041] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.015048] CPU topo: Max. logical packages: 1
[ 0.015049] CPU topo: Max. logical dies: 1
[ 0.015049] CPU topo: Max. dies per package: 1
[ 0.015053] CPU topo: Max. threads per core: 1
[ 0.015053] CPU topo: Num. cores per package: 4
[ 0.015054] CPU topo: Num. threads per package: 4
[ 0.015054] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.015068] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.015080] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.015080] Booting paravirtualized kernel on KVM
[ 0.015082] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.018652] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.018844] percpu: Embedded 55 pages/cpu s185752 r8192 d31336 u524288
[ 0.018868] kvm-guest: PV spinlocks disabled, no host support
[ 0.018869] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.018911] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4,ena,gve,mana", will be passed to user space.
[ 0.018915] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.019237] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.019397] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.019464] software IO TLB: area num 4.
[ 0.030341] Fallback order for Node 0: 0
[ 0.030345] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.030346] Policy zone: Normal
[ 0.030540] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.042598] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.042661] Kernel/User page tables isolation: enabled
[ 0.043361] Dynamic Preempt: none
[ 0.043510] rcu: Preemptible hierarchical RCU implementation.
[ 0.043510] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.043511] Trampoline variant of Tasks RCU enabled.
[ 0.043512] Tracing variant of Tasks RCU enabled.
[ 0.043512] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.043513] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.043519] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.043520] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.047481] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.047680] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.047982] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.054612] Console: colour VGA+ 80x25
[ 0.054615] printk: legacy console [tty0] enabled
[ 0.091505] printk: legacy console [ttyS0] enabled
[ 0.242562] ACPI: Core revision 20250807
[ 0.243841] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.246371] APIC: Switch to symmetric I/O mode setup
[ 0.247939] x2apic enabled
[ 0.249070] APIC: Switched APIC routing to: physical x2apic
[ 0.251740] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.253474] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.256276] Calibrating delay loop (skipped) preset value.. 6192.01 BogoMIPS (lpj=3096006)
[ 0.258354] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.259275] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.261278] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.262276] Speculative Store Bypass: Vulnerable
[ 0.263276] Spectre V2 : Mitigation: Retpolines
[ 0.264275] ITS: Mitigation: Aligned branch/return thunks
[ 0.266275] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.267276] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.268276] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.270276] active return thunk: its_return_thunk
[ 0.272276] x86/fpu: x87 FPU will use FXSAVE
[ 0.288108] Freeing SMP alternatives memory: 40K
[ 0.289279] pid_max: default: 32768 minimum: 301
[ 0.290569] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.292742] landlock: Up and running.
[ 0.294275] Yama: becoming mindful.
[ 0.295393] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.296278] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.400723] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.401440] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.403298] signal: max sigframe size: 1440
[ 0.404303] rcu: Hierarchical SRCU implementation.
[ 0.405275] rcu: Max phase no-delay instances is 400.
[ 0.407328] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.411678] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.413318] smp: Bringing up secondary CPUs ...
[ 0.414404] smpboot: x86: Booting SMP configuration:
[ 0.415277] .... node #0, CPUs: #1 #2 #3
[ 0.420450] smp: Brought up 1 node, 4 CPUs
[ 0.422276] smpboot: Total of 4 processors activated (24768.04 BogoMIPS)
[ 0.424485] Memory: 3999444K/4193760K available (14650K kernel code, 2032K rwdata, 9844K rodata, 2996K init, 1168K bss, 189432K reserved, 0K cma-reserved)
[ 0.425493] devtmpfs: initialized
[ 0.426310] x86/mm: Memory block size: 128MB
[ 0.427728] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.429293] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.431283] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.434014] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.435355] audit: initializing netlink subsys (disabled)
[ 0.437319] audit: type=2000 audit(1785904767.152:1): state=initialized audit_enabled=0 res=1
[ 0.437333] thermal_sys: Registered thermal governor 'step_wise'
[ 0.438286] cpuidle: using governor ladder
[ 0.441280] cpuidle: using governor menu
[ 0.442371] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.445276] PCI: Using configuration type 1 for base access
[ 0.446350] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.448309] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.449276] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.451328] ACPI: Added _OSI(Module Device)
[ 0.452276] ACPI: Added _OSI(Processor Device)
[ 0.453276] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.455932] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.458488] ACPI: Interpreter enabled
[ 0.459283] ACPI: PM: (supports S0 S3 S5)
[ 0.461188] ACPI: Using IOAPIC for interrupt routing
[ 0.462298] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.465276] PCI: Using E820 reservations for host bridge windows
[ 0.467337] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.471392] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.474279] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.476276] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.480283] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.483659] acpiphp: Slot [3] registered
[ 0.485298] acpiphp: Slot [4] registered
[ 0.487298] acpiphp: Slot [5] registered
[ 0.488298] acpiphp: Slot [6] registered
[ 0.490298] acpiphp: Slot [7] registered
[ 0.491296] acpiphp: Slot [8] registered
[ 0.493296] acpiphp: Slot [9] registered
[ 0.494297] acpiphp: Slot [10] registered
[ 0.496296] acpiphp: Slot [11] registered
[ 0.497296] acpiphp: Slot [12] registered
[ 0.499296] acpiphp: Slot [13] registered
[ 0.500296] acpiphp: Slot [14] registered
[ 0.502300] acpiphp: Slot [15] registered
[ 0.503298] acpiphp: Slot [16] registered
[ 0.505296] acpiphp: Slot [17] registered
[ 0.506312] acpiphp: Slot [18] registered
[ 0.508296] acpiphp: Slot [19] registered
[ 0.509297] acpiphp: Slot [20] registered
[ 0.511342] acpiphp: Slot [21] registered
[ 0.512298] acpiphp: Slot [22] registered
[ 0.514315] acpiphp: Slot [23] registered
[ 0.515303] acpiphp: Slot [24] registered
[ 0.517298] acpiphp: Slot [25] registered
[ 0.518313] acpiphp: Slot [26] registered
[ 0.519299] acpiphp: Slot [27] registered
[ 0.521297] acpiphp: Slot [28] registered
[ 0.522297] acpiphp: Slot [29] registered
[ 0.523301] acpiphp: Slot [30] registered
[ 0.524276] acpiphp: Slot [31] registered
[ 0.526291] PCI host bridge to bus 0000:00
[ 0.527279] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.529276] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.531276] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.533276] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.535276] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.537276] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.539374] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.541789] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.545000] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.548349] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.550336] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.552276] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.554276] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.556276] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.558553] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.560943] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.563291] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.565509] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.569951] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.572314] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.574324] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.575430] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.579276] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.583299] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.585290] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.586325] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.588289] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.592276] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.596276] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.598315] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.599359] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.603276] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.611276] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.613290] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.614324] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.620276] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.622412] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.624414] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.626386] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.627340] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.629496] iommu: Default domain type: Translated
[ 0.631276] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.633476] SCSI subsystem initialized
[ 0.634383] pps_core: LinuxPPS API ver. 1 registered
[ 0.636275] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.638281] PTP clock support registered
[ 0.640607] PCI: Using ACPI for IRQ routing
[ 0.642336] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.643336] clocksource: Switched to clocksource kvm-clock
[ 0.645862] VFS: Disk quotas dquot_6.6.0
[ 0.647139] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.649332] pnp: PnP ACPI init
[ 0.650652] pnp: PnP ACPI: found 6 devices
[ 0.658252] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.660673] NET: Registered PF_INET protocol family
[ 0.662031] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.672674] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.675364] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.678074] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.680842] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.683438] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.685633] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.688021] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.690141] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.692548] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.694402] NET: Registered PF_XDP protocol family
[ 0.696006] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.697955] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.699912] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.702139] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.704368] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.706828] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.708734] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.710706] PCI: CLS 0 bytes, default 64
[ 0.712188] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.712343] Unpacking initramfs...
[ 0.712611] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.718343] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.721971] Initialise system trusted keyrings
[ 0.723652] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.732018] Key type asymmetric registered
[ 0.733366] Asymmetric key parser 'x509' registered
[ 0.735098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.737602] io scheduler mq-deadline registered
[ 0.739191] io scheduler kyber registered
[ 0.740601] io scheduler bfq registered
[ 0.743222] ERST DBG: ERST support is disabled.
[ 0.745110] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.748475] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.755681] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.762146] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.764451] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.767978] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.771102] scsi host0: ata_piix
[ 0.772557] scsi host1: ata_piix
[ 0.773733] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.776264] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.778801] hv_vmbus: registering driver hv_netvsc
[ 0.780599] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.784295] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.786039] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.787657] hv_vmbus: registering driver hyperv_keyboard
[ 0.789489] rtc_cmos 00:05: RTC can wake from S4
[ 0.791950] rtc_cmos 00:05: registered as rtc0
[ 0.793621] rtc_cmos 00:05: setting system clock to 2026-08-05T04:39:27 UTC (1785904767)
[ 0.796292] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.798675] intel_pstate: CPU model not supported
[ 0.800554] gre: GRE over IPv4 demultiplexer driver
[ 0.802400] NET: Registered PF_INET6 protocol family
[ 0.804464] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.804551] Segment Routing with IPv6
[ 0.808176] In-situ OAM (IOAM) with IPv6
[ 0.809387] Key type dns_resolver registered
[ 0.810647] IPI shorthand broadcast: enabled
[ 0.813359] sched_clock: Marking stable (610017024, 202587421)->(842962144, -30357699)
[ 0.815851] registered taskstats version 1
[ 0.817205] Loading compiled-in X.509 certificates
[ 0.820546] Freeing initrd memory: 10596K
[ 0.826540] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.831259] Demotion targets for Node 0: null
[ 0.832677] Key type .fscrypt registered
[ 0.833954] Key type fscrypt-provisioning registered
[ 0.938665] ata2: found unknown device (class 0)
[ 0.947651] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.960337] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.992098] Freeing unused kernel image (initmem) memory: 2996K
[ 0.998904] Write protecting the kernel read-only data: 26624k
[ 1.010359] Freeing unused kernel image (text/rodata gap) memory: 1732K
[ 1.019094] Freeing unused kernel image (rodata/data gap) memory: 396K
[ 1.026097] rodata_test: all tests were successful
[ 1.030040] Run /init as init process
[ 1.043381] Alpine Init 3.14.0-r0
[ 1.045401] Loading boot drivers...
[ 1.063803] ACPI: bus type USB registered
[ 1.065157] usbcore: registered new interface driver usbfs
[ 1.066808] usbcore: registered new interface driver hub
[ 1.068365] usbcore: registered new device driver usb
[ 1.072861] usbcore: registered new interface driver usb-storage
[ 1.132291] loop: module loaded
[ 1.160353] ACPI: bus type drm_connector registered
[ 1.180248] Loading boot drivers: ok.
[ 1.182884] Mounting root...
[ 1.198475] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.201010] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.207239] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.208698] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.211327] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.229311] Console: switching to colour frame buffer device 160x50
[ 1.231844] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.264931] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.296516] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.347313] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.353345] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.357466] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.361824] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.416313] block sr0: the capability attribute has been deprecated.
[ 1.978019] EXT4-fs (vda): mounted filesystem 7af5430b-f94c-484c-8fe6-36878b6de03a ro with ordered data mode. Quota mode: none.
[ 1.988846] Mounting root: ok.
[ 2.571636] random: crng init done
Welcome to Alpine Linux 3.24
Kernel 6.18.35-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.6-r0 -> 3.0.7-r0)
(2/2) Upgrading apk-tools (3.0.6-r0 -> 3.0.7-r0)
Executing busybox-1.37.0-r31.trigger
Continuing with the main upgrade transaction:
( 1/17) Upgrading libblkid (2.42-r0 -> 2.42.1-r0)
( 2/17) Upgrading blkid (2.42-r0 -> 2.42.1-r0)
( 3/17) Upgrading libsmartcols (2.42-r0 -> 2.42.1-r0)
( 4/17) Upgrading partx (2.42-r0 -> 2.42.1-r0)
( 5/17) Upgrading libuuid (2.42-r0 -> 2.42.1-r0)
( 6/17) Upgrading libfdisk (2.42-r0 -> 2.42.1-r0)
( 7/17) Upgrading sfdisk (2.42-r0 -> 2.42.1-r0)
( 8/17) Upgrading libexpat (2.8.1-r0 -> 2.8.2-r0)
( 9/17) Upgrading py3-charset-normalizer (3.4.7-r0 -> 3.4.9-r0)
(10/17) Upgrading py3-charset-normalizer-pyc (3.4.7-r0 -> 3.4.9-r0)
(11/17) Upgrading tzdata (2026b-r0 -> 2026c-r0)
(12/17) Upgrading device-mapper-libs (2.03.35-r2 -> 2.03.35-r3)
(13/17) Upgrading linux-virt (6.18.35-r0 -> 6.18.41-r0)
(14/17) Upgrading libmount (2.42-r0 -> 2.42.1-r0)
(15/17) Upgrading mount (2.42-r0 -> 2.42.1-r0)
(16/17) Upgrading libnvmemi (1.16.1-r1 -> 1.16.2-r0)
(17/17) Upgrading libnvme (1.16.1-r1 -> 1.16.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.14.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.41-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 131.3 MiB in 201 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/12) Installing brotli-libs (1.2.0-r1)
( 2/12) Installing c-ares (1.34.8-r0)
( 3/12) Installing libunistring (1.4.2-r0)
( 4/12) Installing libidn2 (2.3.8-r0)
( 5/12) Installing nghttp2-libs (1.69.0-r0)
( 6/12) Installing libpsl (0.21.5-r3)
( 7/12) Installing libcurl (8.21.0-r0)
( 8/12) Installing pcre2 (10.47-r1)
( 9/12) Installing git (2.54.0-r0)
(10/12) Installing git-init-template (2.54.0-r0)
(11/12) Installing gnu-libiconv-libs (1.18-r0)
(12/12) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r31.trigger
OK: 143.9 MiB in 213 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/json-rpc-shell.git json-rpc-shell
Cloning into 'json-rpc-shell'...
remote: Enumerating objects: 882, done.
remote: Counting objects: 100% (61/61), done.
remote: Compressing objects: 100% (61/61), done.
remote: Total 882 (delta 32), reused 0 (delta 0), pack-reused 821 (from 1)
Receiving objects: 100% (882/882), 503.84 KiB | 21.91 MiB/s, done.
Resolving deltas: 100% (561/561), done.
Submodule 'http-parser' (https://github.com/joyent/http-parser.git) registered for path 'http-parser'
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Cloning into '/home/ci/json-rpc-shell/http-parser'...
remote: Enumerating objects: 1675, done.
remote: Total 1675 (delta 0), reused 0 (delta 0), pack-reused 1675 (from 1)
Receiving objects: 100% (1675/1675), 821.10 KiB | 3.27 MiB/s, done.
Resolving deltas: 100% (1044/1044), done.
Cloning into '/home/ci/json-rpc-shell/liberty'...
remote: Enumerating objects: 936, done.
remote: Counting objects: 100% (405/405), done.
remote: Compressing objects: 100% (402/402), done.
remote: Total 936 (delta 258), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (936/936), 456.39 KiB | 18.25 MiB/s, done.
Resolving deltas: 100% (579/579), done.
Submodule path 'http-parser': checked out 'ec8b5ee63f0e51191ea43bb0c6eac7bfbff3141d'
Submodule path 'liberty': checked out '12063aecde1dcb45a9109629edff489a6e988efb'
+ cd json-rpc-shell
+ git -c 'advice.detachedHead=false' checkout 0d245fcbae921a96b16fa53d37a95057a4c66fc2
HEAD is now at 0d245fc Bump liberty, fix build
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=1.2.0-1-g0d245fc
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/1.2.0-1-g0d245fc/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake asciidoctor libev-dev ncurses-dev jansson-dev curl-dev file-dev readline-dev libedit-dev
( 1/54) Installing gmp (6.3.0-r4)
( 2/54) Installing ruby-libs (3.4.9-r0)
( 3/54) Installing libucontext (1.5.1-r0)
( 4/54) Installing ruby (3.4.9-r0)
( 5/54) Installing asciidoctor (2.0.26-r0)
( 6/54) Installing jansson (2.15.0-r0)
( 7/54) Installing binutils (2.45.1-r1)
( 8/54) Installing libmagic (5.47-r2)
( 9/54) Installing file (5.47-r2)
(10/54) Installing libgcc-static (15.2.0-r5)
(11/54) Installing libgomp (15.2.0-r5)
(12/54) Installing libatomic (15.2.0-r5)
(13/54) Installing isl26 (0.26-r2)
(14/54) Installing mpfr4 (4.2.2-r0)
(15/54) Installing mpc1 (1.3.1-r1)
(16/54) Installing gcc (15.2.0-r5)
(17/54) Installing libstdc++-dev (15.2.0-r5)
(18/54) Installing musl-dev (1.2.6-r2)
(19/54) Installing g++ (15.2.0-r5)
(20/54) Installing make (4.4.1-r4)
(21/54) Installing fortify-headers (3.0.1-r2)
(22/54) Installing patch (2.8-r0)
(23/54) Installing build-base (0.5-r4)
(24/54) Installing acl-libs (2.3.2-r1)
(25/54) Installing lz4-libs (1.10.0-r1)
(26/54) Installing libarchive (3.8.7-r0)
(27/54) Installing rhash-libs (1.4.6-r0)
(28/54) Installing libuv (1.52.1-r0)
(29/54) Installing cmake (4.2.3-r0)
(30/54) Installing brotli (1.2.0-r1)
(31/54) Installing pkgconf (2.5.1-r0)
(32/54) Installing brotli-dev (1.2.0-r1)
(33/54) Installing c-ares-dev (1.34.8-r0)
(34/54) Installing libidn2-dev (2.3.8-r0)
(35/54) Installing libpsl-utils (0.21.5-r3)
(36/54) Installing libpsl-dev (0.21.5-r3)
(37/54) Installing nghttp2-dev (1.69.0-r0)
(38/54) Installing openssl-dev (3.5.7-r0)
(39/54) Installing zlib-dev (1.3.2-r0)
(40/54) Installing zstd (1.5.7-r2)
(41/54) Installing zstd-dev (1.5.7-r2)
(42/54) Installing curl-dev (8.21.0-r0)
(43/54) Installing file-dev (5.47-r2)
(44/54) Installing jansson-dev (2.15.0-r0)
(45/54) Installing bsd-compat-headers (0.7.2-r6)
(46/54) Installing libformw (6.6_p20260516-r0)
(47/54) Installing libmenuw (6.6_p20260516-r0)
(48/54) Installing libncurses++ (6.6_p20260516-r0)
(49/54) Installing ncurses-dev (6.6_p20260516-r0)
(50/54) Installing libedit-dev (20260508.3.1-r1)
(51/54) Installing libev (4.33-r1)
(52/54) Installing libev-dev (4.33-r1)
(53/54) Installing libhistory (8.3.3-r1)
(54/54) Installing readline-dev (8.3.3-r1)
Executing busybox-1.37.0-r31.trigger
OK: 491.6 MiB in 267 packages
+ cmake -B build
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Curses: /usr/lib/libcurses.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Found Ncursesw: ncursesw
-- Checking for modules 'libcurl;jansson;libssl;libcrypto'
-- Found libcurl, version 8.21.0
-- Found jansson, version 2.15.0
-- Found libssl, version 3.5.7
-- Found libcrypto, version 3.5.7
-- Found LibEV: ev
-- Performing Test ICONV_ACCEPTS_TRANSLIT
-- Performing Test ICONV_ACCEPTS_TRANSLIT - Failed
-- Found LibMagic: /usr/lib/libmagic.so
-- Configuring done (0.5s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/json-rpc-shell/build
+ cmake --build build -- package
[ 14%] Building C object CMakeFiles/json-rpc-shell.dir/json-rpc-shell.c.o
In file included from /home/ci/json-rpc-shell/json-rpc-shell.c:54:
/home/ci/json-rpc-shell/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 28%] Building C object CMakeFiles/json-rpc-shell.dir/http-parser/http_parser.c.o
[ 42%] Linking C executable json-rpc-shell
[ 42%] Built target json-rpc-shell
[ 57%] Building C object CMakeFiles/json-rpc-test-server.dir/json-rpc-test-server.c.o
In file included from /home/ci/json-rpc-shell/json-rpc-test-server.c:35:
/home/ci/json-rpc-shell/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 71%] Building C object CMakeFiles/json-rpc-test-server.dir/http-parser/http_parser.c.o
[ 85%] Linking C executable json-rpc-test-server
[ 85%] Built target json-rpc-test-server
[100%] Generating man page for json-rpc-shell
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: json-rpc-shell
CPack: - Install project: json-rpc-shell []
CPack: Create package
CPack: - package: /home/ci/json-rpc-shell/build/json-rpc-shell-1.2.0-1-g0d245fc-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: json-rpc-shell
CPack: - Install project: json-rpc-shell []
CPack: Create package
CPack: - package: /home/ci/json-rpc-shell/build/json-rpc-shell-1.2.0-1-g0d245fc-Linux-x86_64.zip generated.
+ cmake build '-DWANT_READLINE=OFF' '-DWANT_LIBEDIT=ON'
-- Checking for module 'libedit'
-- Found libedit, version 3.1
-- Configuring done (0.1s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/json-rpc-shell/build
+ cmake --build build -- package
[ 14%] Building C object CMakeFiles/json-rpc-shell.dir/http-parser/http_parser.c.o
[ 28%] Building C object CMakeFiles/json-rpc-shell.dir/json-rpc-shell.c.o
In file included from /home/ci/json-rpc-shell/json-rpc-shell.c:54:
/home/ci/json-rpc-shell/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 42%] Linking C executable json-rpc-shell
[ 42%] Built target json-rpc-shell
[ 57%] Building C object CMakeFiles/json-rpc-test-server.dir/http-parser/http_parser.c.o
[ 71%] Building C object CMakeFiles/json-rpc-test-server.dir/json-rpc-test-server.c.o
In file included from /home/ci/json-rpc-shell/json-rpc-test-server.c:35:
/home/ci/json-rpc-shell/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 85%] Linking C executable json-rpc-test-server
[ 85%] Built target json-rpc-test-server
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: json-rpc-shell
CPack: - Install project: json-rpc-shell []
CPack: Create package
CPack: - package: /home/ci/json-rpc-shell/build/json-rpc-shell-1.2.0-1-g0d245fc-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: json-rpc-shell
CPack: - Install project: json-rpc-shell []
CPack: Create package
CPack: - package: /home/ci/json-rpc-shell/build/json-rpc-shell-1.2.0-1-g0d245fc-Linux-x86_64.zip generated.
Deploy log