- Created
- 2d ago
- Changed
- 2d ago
- Project
- p/usb-drivers
- Commit
- 0f22f385fd85a42a8529a12c1314053d46c0e4ee
- Runner
- Alpine 3.24
- State
- Success
- Notified
- 1
- Duration
- 59s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.35-0-virt (buildozer@build-3-24-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-06-09 12:34:47
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000018] kvm-clock: using sched offset of 10888812116 cycles
[ 0.000019] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000022] tsc: Detected 3096.006 MHz processor
[ 0.000498] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000524] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000526] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000560] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007194] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.008220] RAMDISK: [mem 0x7f5a7000-0x7fffffff]
[ 0.008222] ACPI: Early table checksum verification disabled
[ 0.008224] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.008228] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.008232] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.008236] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.008239] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.008241] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.008243] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.008246] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.008248] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.008249] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.008249] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.008250] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.008250] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.008251] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.008659] No NUMA configuration found
[ 0.008660] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.008662] NODE_DATA(0) allocated [mem 0x13fff8d40-0x13fffcfff]
[ 0.008676] Zone ranges:
[ 0.008677] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008678] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008679] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008680] Movable zone start for each node
[ 0.008680] Early memory node ranges
[ 0.008680] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.008681] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.008682] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008683] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.009721] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.009737] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.044720] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.045382] ACPI: PM-Timer IO Port: 0x608
[ 0.045396] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.045429] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.045432] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.045433] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.045434] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.045435] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.045435] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.045439] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.045440] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.045447] CPU topo: Max. logical packages: 1
[ 0.045448] CPU topo: Max. logical dies: 1
[ 0.045448] CPU topo: Max. dies per package: 1
[ 0.045451] CPU topo: Max. threads per core: 1
[ 0.045452] CPU topo: Num. cores per package: 4
[ 0.045452] CPU topo: Num. threads per package: 4
[ 0.045452] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.045467] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.045479] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.045480] Booting paravirtualized kernel on KVM
[ 0.045481] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.049064] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.050209] percpu: Embedded 55 pages/cpu s185752 r8192 d31336 u524288
[ 0.050235] kvm-guest: PV spinlocks disabled, no host support
[ 0.050235] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.050278] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4,ena,gve,mana", will be passed to user space.
[ 0.050281] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.051884] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.053107] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.053181] software IO TLB: area num 4.
[ 0.098922] Fallback order for Node 0: 0
[ 0.098928] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.098929] Policy zone: Normal
[ 0.100283] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.112999] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.113062] Kernel/User page tables isolation: enabled
[ 0.113774] Dynamic Preempt: none
[ 0.114723] rcu: Preemptible hierarchical RCU implementation.
[ 0.114724] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.114725] Trampoline variant of Tasks RCU enabled.
[ 0.114725] Tracing variant of Tasks RCU enabled.
[ 0.114726] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.114726] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.114737] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.114738] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.118883] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.119085] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.119412] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.126718] Console: colour VGA+ 80x25
[ 0.126721] printk: legacy console [tty0] enabled
[ 0.165062] printk: legacy console [ttyS0] enabled
[ 0.316986] ACPI: Core revision 20250807
[ 0.318401] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.320967] APIC: Switch to symmetric I/O mode setup
[ 0.322539] x2apic enabled
[ 0.323646] APIC: Switched APIC routing to: physical x2apic
[ 0.326217] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.327888] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.330711] Calibrating delay loop (skipped) preset value.. 6192.01 BogoMIPS (lpj=3096006)
[ 0.332804] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.333710] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.335713] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.336711] Speculative Store Bypass: Vulnerable
[ 0.337711] Spectre V2 : Mitigation: Retpolines
[ 0.338710] ITS: Mitigation: Aligned branch/return thunks
[ 0.340710] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.341710] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.342710] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.344711] active return thunk: its_return_thunk
[ 0.345712] x86/fpu: x87 FPU will use FXSAVE
[ 0.362421] Freeing SMP alternatives memory: 40K
[ 0.363714] pid_max: default: 32768 minimum: 301
[ 0.365729] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.367938] landlock: Up and running.
[ 0.368710] Yama: becoming mindful.
[ 0.369848] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.371713] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.478249] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.479710] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.480750] signal: max sigframe size: 1440
[ 0.481740] rcu: Hierarchical SRCU implementation.
[ 0.483715] rcu: Max phase no-delay instances is 400.
[ 0.484767] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.489583] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.490759] smp: Bringing up secondary CPUs ...
[ 0.492801] smpboot: x86: Booting SMP configuration:
[ 0.493713] .... node #0, CPUs: #1 #2 #3
[ 0.498739] smp: Brought up 1 node, 4 CPUs
[ 0.500711] smpboot: Total of 4 processors activated (24768.04 BogoMIPS)
[ 0.501871] Memory: 3999448K/4193760K available (14650K kernel code, 2032K rwdata, 9844K rodata, 2996K init, 1168K bss, 189428K reserved, 0K cma-reserved)
[ 0.504752] devtmpfs: initialized
[ 0.506605] x86/mm: Memory block size: 128MB
[ 0.508732] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.509737] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.510718] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.514089] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.514795] audit: initializing netlink subsys (disabled)
[ 0.515729] audit: type=2000 audit(1787307485.771:1): state=initialized audit_enabled=0 res=1
[ 0.515760] thermal_sys: Registered thermal governor 'step_wise'
[ 0.517720] cpuidle: using governor ladder
[ 0.520714] cpuidle: using governor menu
[ 0.521847] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.522989] PCI: Using configuration type 1 for base access
[ 0.523826] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.524748] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.526710] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.529825] ACPI: Added _OSI(Module Device)
[ 0.530711] ACPI: Added _OSI(Processor Device)
[ 0.531710] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.534212] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.536834] ACPI: Interpreter enabled
[ 0.537718] ACPI: PM: (supports S0 S3 S5)
[ 0.538710] ACPI: Using IOAPIC for interrupt routing
[ 0.540747] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.542710] PCI: Using E820 reservations for host bridge windows
[ 0.544793] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.547749] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.549713] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.551711] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.554729] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.558999] acpiphp: Slot [3] registered
[ 0.559731] acpiphp: Slot [4] registered
[ 0.560733] acpiphp: Slot [5] registered
[ 0.562750] acpiphp: Slot [6] registered
[ 0.563732] acpiphp: Slot [7] registered
[ 0.564613] acpiphp: Slot [8] registered
[ 0.565730] acpiphp: Slot [9] registered
[ 0.567730] acpiphp: Slot [10] registered
[ 0.568731] acpiphp: Slot [11] registered
[ 0.569730] acpiphp: Slot [12] registered
[ 0.570730] acpiphp: Slot [13] registered
[ 0.571731] acpiphp: Slot [14] registered
[ 0.573747] acpiphp: Slot [15] registered
[ 0.574743] acpiphp: Slot [16] registered
[ 0.575658] acpiphp: Slot [17] registered
[ 0.577626] acpiphp: Slot [18] registered
[ 0.578750] acpiphp: Slot [19] registered
[ 0.579768] acpiphp: Slot [20] registered
[ 0.580733] acpiphp: Slot [21] registered
[ 0.581732] acpiphp: Slot [22] registered
[ 0.583730] acpiphp: Slot [23] registered
[ 0.584741] acpiphp: Slot [24] registered
[ 0.585730] acpiphp: Slot [25] registered
[ 0.586711] acpiphp: Slot [26] registered
[ 0.587743] acpiphp: Slot [27] registered
[ 0.589762] acpiphp: Slot [28] registered
[ 0.590752] acpiphp: Slot [29] registered
[ 0.591732] acpiphp: Slot [30] registered
[ 0.592730] acpiphp: Slot [31] registered
[ 0.594726] PCI host bridge to bus 0000:00
[ 0.595714] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.597712] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.599711] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.601711] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.603711] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.605724] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.606798] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.610185] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.613710] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.616712] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.618809] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.620711] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.621711] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.623710] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.625994] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.628711] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.630737] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.632941] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.638744] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.640737] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.641760] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.643858] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.647308] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.651724] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.652724] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.654765] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.656728] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.660210] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.663724] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.665724] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.666760] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.670968] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.677711] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.678724] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.680763] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.686710] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.688856] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.690856] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.692844] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.694774] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.696711] iommu: Default domain type: Translated
[ 0.697711] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.699908] SCSI subsystem initialized
[ 0.701815] pps_core: LinuxPPS API ver. 1 registered
[ 0.702710] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.705716] PTP clock support registered
[ 0.706972] PCI: Using ACPI for IRQ routing
[ 0.708990] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.710770] clocksource: Switched to clocksource kvm-clock
[ 0.715069] VFS: Disk quotas dquot_6.6.0
[ 0.716320] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.718502] pnp: PnP ACPI init
[ 0.719788] pnp: PnP ACPI: found 6 devices
[ 0.727196] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.729813] NET: Registered PF_INET protocol family
[ 0.731261] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.742406] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.744763] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.746987] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.750233] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.752394] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.754310] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.756376] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.758226] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.760275] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.761833] NET: Registered PF_XDP protocol family
[ 0.763193] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.764789] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.766394] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.768224] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.770087] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.772132] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.773720] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.775463] PCI: CLS 0 bytes, default 64
[ 0.776758] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.776835] Unpacking initramfs...
[ 0.777113] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.781904] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.784801] Initialise system trusted keyrings
[ 0.786154] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.794180] Key type asymmetric registered
[ 0.795356] Asymmetric key parser 'x509' registered
[ 0.796766] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.798856] io scheduler mq-deadline registered
[ 0.800189] io scheduler kyber registered
[ 0.801494] io scheduler bfq registered
[ 0.803630] ERST DBG: ERST support is disabled.
[ 0.805552] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.809064] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.812750] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.815538] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.817551] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.822956] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.825372] scsi host0: ata_piix
[ 0.826596] scsi host1: ata_piix
[ 0.827651] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.829939] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.832095] hv_vmbus: registering driver hv_netvsc
[ 0.833688] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.837113] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.838578] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.840113] hv_vmbus: registering driver hyperv_keyboard
[ 0.841718] rtc_cmos 00:05: RTC can wake from S4
[ 0.843915] rtc_cmos 00:05: registered as rtc0
[ 0.845331] rtc_cmos 00:05: setting system clock to 2026-08-21T10:18:05 UTC (1787307485)
[ 0.847776] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.849889] intel_pstate: CPU model not supported
[ 0.851385] gre: GRE over IPv4 demultiplexer driver
[ 0.852821] NET: Registered PF_INET6 protocol family
[ 0.854551] Segment Routing with IPv6
[ 0.855639] In-situ OAM (IOAM) with IPv6
[ 0.856865] Key type dns_resolver registered
[ 0.857594] Freeing initrd memory: 10596K
[ 0.858238] IPI shorthand broadcast: enabled
[ 0.858823] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.863374] sched_clock: Marking stable (658304589, 204617869)->(892067007, -29144549)
[ 0.865971] registered taskstats version 1
[ 0.867363] Loading compiled-in X.509 certificates
[ 0.872019] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.876437] Demotion targets for Node 0: null
[ 0.878048] Key type .fscrypt registered
[ 0.879168] Key type fscrypt-provisioning registered
[ 0.989519] ata2: found unknown device (class 0)
[ 0.997102] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 1.007901] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 1.034793] Freeing unused kernel image (initmem) memory: 2996K
[ 1.042418] Write protecting the kernel read-only data: 26624k
[ 1.053750] Freeing unused kernel image (text/rodata gap) memory: 1732K
[ 1.061394] Freeing unused kernel image (rodata/data gap) memory: 396K
[ 1.066332] rodata_test: all tests were successful
[ 1.069546] Run /init as init process
[ 1.081746] Alpine Init 3.14.0-r0
[ 1.083925] Loading boot drivers...
[ 1.103580] ACPI: bus type USB registered
[ 1.105092] usbcore: registered new interface driver usbfs
[ 1.106988] usbcore: registered new interface driver hub
[ 1.108803] usbcore: registered new device driver usb
[ 1.113380] usbcore: registered new interface driver usb-storage
[ 1.176535] loop: module loaded
[ 1.204485] ACPI: bus type drm_connector registered
[ 1.224671] Loading boot drivers: ok.
[ 1.227314] Mounting root...
[ 1.247611] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.249970] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.257135] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.258533] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.260836] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.275140] Console: switching to colour frame buffer device 160x50
[ 1.278244] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.315478] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.342194] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.371606] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.379755] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.390750] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.398514] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.467209] block sr0: the capability attribute has been deprecated.
[ 1.999529] EXT4-fs (vda): mounted filesystem 7af5430b-f94c-484c-8fe6-36878b6de03a ro with ordered data mode. Quota mode: none.
[ 2.010261] Mounting root: ok.
[ 2.634638] random: crng init done
Welcome to Alpine Linux 3.24
Kernel 6.18.35-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.6-r0 -> 3.0.7-r0)
(2/2) Upgrading apk-tools (3.0.6-r0 -> 3.0.7-r0)
Executing busybox-1.37.0-r31.trigger
Continuing with the main upgrade transaction:
( 1/21) Upgrading libblkid (2.42-r0 -> 2.42.1-r0)
( 2/21) Upgrading blkid (2.42-r0 -> 2.42.1-r0)
( 3/21) Upgrading libsmartcols (2.42-r0 -> 2.42.1-r0)
( 4/21) Upgrading partx (2.42-r0 -> 2.42.1-r0)
( 5/21) Upgrading libuuid (2.42-r0 -> 2.42.1-r0)
( 6/21) Upgrading libfdisk (2.42-r0 -> 2.42.1-r0)
( 7/21) Upgrading sfdisk (2.42-r0 -> 2.42.1-r0)
( 8/21) Upgrading libexpat (2.8.1-r0 -> 2.8.3-r0)
( 9/21) Upgrading python3 (3.14.5-r0 -> 3.14.7-r1)
(10/21) Upgrading python3-pycache-pyc0 (3.14.5-r0 -> 3.14.7-r1)
(11/21) Upgrading pyc (3.14.5-r0 -> 3.14.7-r1)
(12/21) Upgrading python3-pyc (3.14.5-r0 -> 3.14.7-r1)
(13/21) Upgrading py3-charset-normalizer (3.4.7-r0 -> 3.4.9-r0)
(14/21) Upgrading py3-charset-normalizer-pyc (3.4.7-r0 -> 3.4.9-r0)
(15/21) Upgrading tzdata (2026b-r0 -> 2026c-r0)
(16/21) Upgrading device-mapper-libs (2.03.35-r2 -> 2.03.35-r3)
(17/21) Upgrading linux-virt (6.18.35-r0 -> 6.18.44-r0)
(18/21) Upgrading libmount (2.42-r0 -> 2.42.1-r0)
(19/21) Upgrading mount (2.42-r0 -> 2.42.1-r0)
(20/21) Upgrading libnvmemi (1.16.1-r1 -> 1.16.2-r0)
(21/21) Upgrading libnvme (1.16.1-r1 -> 1.16.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.14.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.44-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 131.4 MiB in 201 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/12) Installing brotli-libs (1.2.0-r1)
( 2/12) Installing c-ares (1.34.8-r0)
( 3/12) Installing libunistring (1.4.2-r0)
( 4/12) Installing libidn2 (2.3.8-r0)
( 5/12) Installing nghttp2-libs (1.69.0-r0)
( 6/12) Installing libpsl (0.21.5-r3)
( 7/12) Installing libcurl (8.21.0-r0)
( 8/12) Installing pcre2 (10.47-r1)
( 9/12) Installing git (2.54.0-r0)
(10/12) Installing git-init-template (2.54.0-r0)
(11/12) Installing gnu-libiconv-libs (1.18-r0)
(12/12) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r31.trigger
OK: 144.1 MiB in 213 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/usb-drivers.git usb-drivers
Cloning into 'usb-drivers'...
remote: Enumerating objects: 200, done.
remote: Counting objects: 100% (200/200), done.
remote: Compressing objects: 100% (103/103), done.
remote: Total 200 (delta 122), reused 158 (delta 96), pack-reused 0 (from 0)
Receiving objects: 100% (200/200), 139.27 KiB | 13.93 MiB/s, done.
Resolving deltas: 100% (122/122), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty) registered for path 'liberty'
Cloning into '/home/ci/usb-drivers/liberty'...
remote: Enumerating objects: 966, done.
remote: Counting objects: 100% (435/435), done.
remote: Compressing objects: 100% (432/432), done.
remote: Total 966 (delta 279), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (966/966), 473.51 KiB | 19.73 MiB/s, done.
Resolving deltas: 100% (600/600), done.
Submodule path 'liberty': checked out '9268fb8eba4a60499809965b3b69c2eb7e3798e7'
+ cd usb-drivers
+ git -c 'advice.detachedHead=false' checkout 0f22f385fd85a42a8529a12c1314053d46c0e4ee
HEAD is now at 0f22f38 Win64Depends.sh: move to supported ucrt64
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=1.2.0-15-g0f22f38
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/1.2.0-15-g0f22f38/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake libusb-dev hidapi-dev
( 1/31) Installing jansson (2.15.0-r0)
( 2/31) Installing binutils (2.45.1-r1)
( 3/31) Installing libmagic (5.47-r2)
( 4/31) Installing file (5.47-r2)
( 5/31) Installing libgcc-static (15.2.0-r5)
( 6/31) Installing libgomp (15.2.0-r5)
( 7/31) Installing libatomic (15.2.0-r5)
( 8/31) Installing gmp (6.3.0-r4)
( 9/31) Installing isl26 (0.26-r2)
(10/31) Installing mpfr4 (4.2.2-r0)
(11/31) Installing mpc1 (1.3.1-r1)
(12/31) Installing gcc (15.2.0-r5)
(13/31) Installing libstdc++-dev (15.2.0-r5)
(14/31) Installing musl-dev (1.2.6-r2)
(15/31) Installing g++ (15.2.0-r5)
(16/31) Installing make (4.4.1-r4)
(17/31) Installing fortify-headers (3.0.1-r2)
(18/31) Installing patch (2.8-r0)
(19/31) Installing build-base (0.5-r4)
(20/31) Installing acl-libs (2.3.2-r1)
(21/31) Installing lz4-libs (1.10.0-r1)
(22/31) Installing libarchive (3.8.7-r0)
(23/31) Installing rhash-libs (1.4.6-r0)
(24/31) Installing libuv (1.52.1-r0)
(25/31) Installing cmake (4.2.3-r0)
(26/31) Installing eudev-libs (3.2.14-r6)
(27/31) Installing libusb (1.0.30-r0)
(28/31) Installing hidapi (0.15.0-r0)
(29/31) Installing pkgconf (2.5.1-r0)
(30/31) Installing hidapi-dev (0.15.0-r0)
(31/31) Installing libusb-dev (1.0.30-r0)
Executing busybox-1.37.0-r31.trigger
OK: 468.0 MiB in 244 packages
+ doas apk add --no-interactive mingw-w64-gcc rsvg-convert icoutils cmake make pkgconf curl libarchive-tools coreutils ncurses
( 1/57) Installing coreutils-env (9.11-r0)
( 2/57) Installing coreutils-fmt (9.11-r0)
( 3/57) Installing coreutils-sha512sum (9.11-r0)
( 4/57) Installing libattr (2.5.2-r2)
( 5/57) Installing coreutils (9.11-r0)
( 6/57) Installing curl (8.21.0-r0)
( 7/57) Installing perl (5.42.2-r0)
( 8/57) Installing perl-error (0.17030-r0)
( 9/57) Installing perl-git (2.54.0-r0)
(10/57) Installing git-perl (2.54.0-r0)
(11/57) Installing perl-http-date (6.06-r0)
(12/57) Installing perl-clone (0.50-r0)
(13/57) Installing perl-mime-base32 (1.303-r3)
(14/57) Installing perl-mime-base64 (3.16-r7)
(15/57) Installing perl-uri (5.34-r0)
(16/57) Installing perl-io-html (1.004-r1)
(17/57) Installing perl-encode-locale (1.05-r5)
(18/57) Installing perl-lwp-mediatypes (6.04-r3)
(19/57) Installing perl-http-message (7.02-r0)
(20/57) Installing perl-http-cookies (6.11-r0)
(21/57) Installing perl-net-http (6.24-r0)
(22/57) Installing perl-html-tagset (3.24-r0)
(23/57) Installing perl-html-parser (3.85-r0)
(24/57) Installing perl-file-listing (6.16-r0)
(25/57) Installing perl-www-robotrules (6.02-r5)
(26/57) Installing perl-http-negotiate (6.01-r5)
(27/57) Installing perl-try-tiny (0.32-r0)
(28/57) Installing perl-libwww (6.83-r0)
(29/57) Installing libpng (1.6.58-r1)
(30/57) Installing icoutils (0.32.3-r4)
(31/57) Installing libarchive-tools (3.8.7-r0)
(32/57) Installing mingw-w64-binutils (2.45.1-r0)
(33/57) Installing mingw-w64-crt (14.0.0-r0)
(34/57) Installing mingw-w64-headers (14.0.0-r0)
(35/57) Installing mingw-w64-winpthreads (14.0.0-r0)
(36/57) Installing mingw-w64-gcc (15.2.0-r0)
(37/57) Installing ncurses (6.6_p20260516-r0)
(38/57) Installing libxau (1.0.12-r0)
(39/57) Installing libxdmcp (1.1.5-r1)
(40/57) Installing libxcb (1.17.0-r2)
(41/57) Installing libx11 (1.8.13-r0)
(42/57) Installing libxext (1.3.7-r0)
(43/57) Installing libxrender (0.9.12-r0)
(44/57) Installing freetype (2.14.3-r0)
(45/57) Installing fontconfig (2.17.1-r1)
(46/57) Installing pixman (0.46.4-r0)
(47/57) Installing cairo (1.18.4-r1)
(48/57) Installing libdav1d (1.5.3-r0)
(49/57) Installing libintl (1.0-r0)
(50/57) Installing glib (2.88.1-r1)
(51/57) Installing graphite2 (1.3.14-r6)
(52/57) Installing harfbuzz (13.2.1-r0)
(53/57) Installing libxft (2.3.9-r0)
(54/57) Installing fribidi (1.0.16-r3)
(55/57) Installing pango (1.57.1-r0)
(56/57) Installing libxml2 (2.13.9-r2)
(57/57) Installing rsvg-convert (2.62.3-r0)
Executing busybox-1.37.0-r31.trigger
Executing glib-2.88.1-r1.trigger
OK: 1039.3 MiB in 301 packages
+ cmake -B build
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for module 'libusb-1.0'
-- Found libusb-1.0, version 1.0.30
-- Configuring done (0.2s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/usb-drivers/build
+ cmake --build build -- package
[ 5%] Building C object CMakeFiles/elksmart-comm.dir/elksmart-comm.c.o
In file included from /home/ci/usb-drivers/elksmart-comm.c:22:
/home/ci/usb-drivers/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 10%] Linking C executable elksmart-comm
[ 10%] Built target elksmart-comm
[ 15%] Building C object CMakeFiles/test-elksmart-comm.dir/elksmart-comm.c.o
In file included from /home/ci/usb-drivers/elksmart-comm.c:22:
/home/ci/usb-drivers/liberty/liberty.c:841:42: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (17 chars into 16 available) [-Wunterminated-string-initialization]
841 | static unsigned char g_siphash_key[16] = "SipHash 2-4 key!";
| ^~~~~~~~~~~~~~~~~~
[ 20%] Linking C executable test-elksmart-comm
[ 20%] Built target test-elksmart-comm
[ 25%] Building C object CMakeFiles/razer-bw-te-ctl.dir/razer-bw-te-ctl.c.o
[ 30%] Linking C executable razer-bw-te-ctl
[ 30%] Built target razer-bw-te-ctl
[ 35%] Building C object CMakeFiles/eizoctl.dir/eizoctl.c.o
[ 40%] Linking C executable eizoctl
[ 40%] Built target eizoctl
[ 45%] Building C object CMakeFiles/upscat.dir/upscat.c.o
[ 50%] Linking C executable upscat
[ 50%] Built target upscat
[ 55%] Building C object CMakeFiles/test-upscat.dir/upscat.c.o
[ 60%] Linking C executable test-upscat
[ 60%] Built target test-upscat
[ 65%] Generating AsciiDoc man page for elksmart-comm
[ 70%] Generating roff man page for elksmart-comm
[ 75%] Generating AsciiDoc man page for razer-bw-te-ctl
[ 80%] Generating roff man page for razer-bw-te-ctl
[ 85%] Generating AsciiDoc man page for eizoctl
[ 90%] Generating roff man page for eizoctl
[ 95%] Generating AsciiDoc man page for upscat
[100%] Generating roff man page for upscat
[100%] Built target docs
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build/usb-drivers-1.2.0-15-g0f22f38-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build/usb-drivers-1.2.0-15-g0f22f38-Linux-x86_64.zip generated.
+ sh -e ./Win64Depends.sh
-- Fetching repository DB
######################################################################### 100.0%
-- Resolving mingw-w64-ucrt-x86_64-hidapi mingw-w64-ucrt-x86_64-libusb
-- Fetching mingw-w64-ucrt-x86_64-hidapi-0.15.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-gcc-libs-16.2.0-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libwinpthread-14.0.0.r283.ga7cb47123-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-tzdata-2026c-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libusb-1.0.30-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Verifying checksums
-- Extracting packages
-- Success
+ toolchain=/home/ci/usb-drivers/liberty/cmake/toolchains/MinGW-w64-x64.cmake
+ cmake -B build-Win64 '-DCMAKE_TOOLCHAIN_FILE=/home/ci/usb-drivers/liberty/cmake/toolchains/MinGW-w64-x64.cmake'
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/x86_64-w64-mingw32-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for module 'libusb-1.0'
-- Package 'libusb-1.0' not found
-- Checking for one of the modules 'hidapi;hidapi-hidraw;hidapi-libusb'
-- Configuring done (0.3s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/usb-drivers/build-Win64
+ cmake --build build-Win64 -- package
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build-Win64/usb-drivers-1.2.0-15-g0f22f38-Windows-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: usb-drivers
CPack: - Install project: usb-drivers []
CPack: Create package
CPack: - package: /home/ci/usb-drivers/build-Win64/usb-drivers-1.2.0-15-g0f22f38-Windows-x86_64.zip generated.
+ mv build-Win64/usb-drivers-1.2.0-15-g0f22f38-Windows-x86_64.zip /home/ci/acid-deploy
Deploy log
+ mv -- usb-drivers-1.2.0-15-g0f22f38-Windows-x86_64.zip /home/acid/cd