- Created
- 2d ago
- Changed
- 2d ago
- Project
- p/tdv
- Commit
- 3dd8bee5186e68eefc6d46ffef92ee7565f05828
- Runner
- Alpine 3.24
- State
- Success
- Notified
- 1
- Duration
- 2m18s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et a
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
l
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.35-0-virt (buildozer@build-3-24-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-06-09 12:34:47
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 10854191103 cycles
[ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000006] tsc: Detected 3096.006 MHz processor
[ 0.000520] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000546] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000549] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000583] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007259] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007418] RAMDISK: [mem 0x7f5a7000-0x7fffffff]
[ 0.007419] ACPI: Early table checksum verification disabled
[ 0.007422] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007425] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007429] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007433] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007435] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007438] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007440] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007442] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007444] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007445] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007446] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007446] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007447] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007447] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.007892] No NUMA configuration found
[ 0.007892] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.007895] NODE_DATA(0) allocated [mem 0x13fff8d40-0x13fffcfff]
[ 0.007915] Zone ranges:
[ 0.007915] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007916] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007917] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007918] Movable zone start for each node
[ 0.007919] Early memory node ranges
[ 0.007919] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.007920] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.007921] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007921] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.008007] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.008019] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013500] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.014137] ACPI: PM-Timer IO Port: 0x608
[ 0.014152] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.014185] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.014188] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014189] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.014190] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014191] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.014191] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.014195] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.014196] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014203] CPU topo: Max. logical packages: 1
[ 0.014203] CPU topo: Max. logical dies: 1
[ 0.014204] CPU topo: Max. dies per package: 1
[ 0.014207] CPU topo: Max. threads per core: 1
[ 0.014207] CPU topo: Num. cores per package: 4
[ 0.014208] CPU topo: Num. threads per package: 4
[ 0.014208] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.014223] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.014234] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.014235] Booting paravirtualized kernel on KVM
[ 0.014237] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.018032] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.018224] percpu: Embedded 55 pages/cpu s185752 r8192 d31336 u524288
[ 0.018247] kvm-guest: PV spinlocks disabled, no host support
[ 0.018248] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.018291] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4,ena,gve,mana", will be passed to user space.
[ 0.018294] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.018695] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.018857] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.018926] software IO TLB: area num 4.
[ 0.029969] Fallback order for Node 0: 0
[ 0.029973] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.029974] Policy zone: Normal
[ 0.030169] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.042024] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.042087] Kernel/User page tables isolation: enabled
[ 0.042792] Dynamic Preempt: none
[ 0.042939] rcu: Preemptible hierarchical RCU implementation.
[ 0.042940] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.042941] Trampoline variant of Tasks RCU enabled.
[ 0.042941] Tracing variant of Tasks RCU enabled.
[ 0.042942] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.042943] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.042949] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.042950] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.047090] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.047288] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.047596] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.054232] Console: colour VGA+ 80x25
[ 0.054235] printk: legacy console [tty0] enabled
[ 0.090650] printk: legacy console [ttyS0] enabled
[ 0.252222] ACPI: Core revision 20250807
[ 0.253575] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.256139] APIC: Switch to symmetric I/O mode setup
[ 0.257742] x2apic enabled
[ 0.258855] APIC: Switched APIC routing to: physical x2apic
[ 0.261555] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.263282] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.266180] Calibrating delay loop (skipped) preset value.. 6192.01 BogoMIPS (lpj=3096006)
[ 0.267260] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.268180] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.269183] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.271180] Speculative Store Bypass: Vulnerable
[ 0.273180] Spectre V2 : Mitigation: Retpolines
[ 0.274180] ITS: Mitigation: Aligned branch/return thunks
[ 0.275180] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.276180] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.278180] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.279181] active return thunk: its_return_thunk
[ 0.280181] x86/fpu: x87 FPU will use FXSAVE
[ 0.296344] Freeing SMP alternatives memory: 40K
[ 0.297183] pid_max: default: 32768 minimum: 301
[ 0.299222] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.301347] landlock: Up and running.
[ 0.302180] Yama: becoming mindful.
[ 0.303336] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.304182] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.408841] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.409347] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.411203] signal: max sigframe size: 1440
[ 0.412207] rcu: Hierarchical SRCU implementation.
[ 0.413180] rcu: Max phase no-delay instances is 400.
[ 0.414219] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.418182] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.420223] smp: Bringing up secondary CPUs ...
[ 0.422263] smpboot: x86: Booting SMP configuration:
[ 0.423182] .... node #0, CPUs: #1 #2 #3
[ 0.427234] smp: Brought up 1 node, 4 CPUs
[ 0.430180] smpboot: Total of 4 processors activated (24768.04 BogoMIPS)
[ 0.431366] Memory: 3999444K/4193760K available (14650K kernel code, 2032K rwdata, 9844K rodata, 2996K init, 1168K bss, 189432K reserved, 0K cma-reserved)
[ 0.433354] devtmpfs: initialized
[ 0.434216] x86/mm: Memory block size: 128MB
[ 0.436303] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.437186] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.439186] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.442363] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.444210] audit: initializing netlink subsys (disabled)
[ 0.445204] audit: type=2000 audit(1787312814.664:1): state=initialized audit_enabled=0 res=1
[ 0.445240] thermal_sys: Registered thermal governor 'step_wise'
[ 0.447188] cpuidle: using governor ladder
[ 0.450184] cpuidle: using governor menu
[ 0.451273] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.452443] PCI: Using configuration type 1 for base access
[ 0.453257] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.455194] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.456180] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.459203] ACPI: Added _OSI(Module Device)
[ 0.460180] ACPI: Added _OSI(Processor Device)
[ 0.461180] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.462666] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.464315] ACPI: Interpreter enabled
[ 0.465188] ACPI: PM: (supports S0 S3 S5)
[ 0.466078] ACPI: Using IOAPIC for interrupt routing
[ 0.468198] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.470180] PCI: Using E820 reservations for host bridge windows
[ 0.472257] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.475359] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.477183] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.479181] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.482187] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.485481] acpiphp: Slot [3] registered
[ 0.486201] acpiphp: Slot [4] registered
[ 0.488200] acpiphp: Slot [5] registered
[ 0.489200] acpiphp: Slot [6] registered
[ 0.490202] acpiphp: Slot [7] registered
[ 0.491200] acpiphp: Slot [8] registered
[ 0.492201] acpiphp: Slot [9] registered
[ 0.494200] acpiphp: Slot [10] registered
[ 0.495200] acpiphp: Slot [11] registered
[ 0.496200] acpiphp: Slot [12] registered
[ 0.497200] acpiphp: Slot [13] registered
[ 0.498200] acpiphp: Slot [14] registered
[ 0.500202] acpiphp: Slot [15] registered
[ 0.501102] acpiphp: Slot [16] registered
[ 0.502200] acpiphp: Slot [17] registered
[ 0.503200] acpiphp: Slot [18] registered
[ 0.505200] acpiphp: Slot [19] registered
[ 0.506206] acpiphp: Slot [20] registered
[ 0.507202] acpiphp: Slot [21] registered
[ 0.508202] acpiphp: Slot [22] registered
[ 0.509200] acpiphp: Slot [23] registered
[ 0.511209] acpiphp: Slot [24] registered
[ 0.512103] acpiphp: Slot [25] registered
[ 0.513226] acpiphp: Slot [26] registered
[ 0.514200] acpiphp: Slot [27] registered
[ 0.516214] acpiphp: Slot [28] registered
[ 0.517210] acpiphp: Slot [29] registered
[ 0.518202] acpiphp: Slot [30] registered
[ 0.519200] acpiphp: Slot [31] registered
[ 0.520196] PCI host bridge to bus 0000:00
[ 0.522182] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.524182] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.525180] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.528180] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.530180] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.532181] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.533240] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.537180] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.540181] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.543278] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.545246] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.547180] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.548181] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.550180] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.552430] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.555591] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.557194] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.559528] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.565222] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.566206] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.568281] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.570305] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.573541] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.577197] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.579194] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.581229] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.583194] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.586899] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.590832] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.592194] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.594245] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.598064] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.601978] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.603196] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.605233] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.611223] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.613180] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.614295] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.616327] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.618244] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.620673] iommu: Default domain type: Translated
[ 0.622184] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.624291] SCSI subsystem initialized
[ 0.625281] pps_core: LinuxPPS API ver. 1 registered
[ 0.626180] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.629185] PTP clock support registered
[ 0.630494] PCI: Using ACPI for IRQ routing
[ 0.632381] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.634218] clocksource: Switched to clocksource kvm-clock
[ 0.636099] VFS: Disk quotas dquot_6.6.0
[ 0.637233] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.639168] pnp: PnP ACPI init
[ 0.640357] pnp: PnP ACPI: found 6 devices
[ 0.647529] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.650076] NET: Registered PF_INET protocol family
[ 0.651585] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.661993] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.664440] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.666672] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.669168] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.671422] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.673350] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.675532] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.677494] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.679716] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.681331] NET: Registered PF_XDP protocol family
[ 0.682800] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.684572] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.686374] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.688313] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.690281] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.692406] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.694150] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.696036] PCI: CLS 0 bytes, default 64
[ 0.697434] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.697503] Unpacking initramfs...
[ 0.697802] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.702977] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.706221] Initialise system trusted keyrings
[ 0.707702] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.715518] Key type asymmetric registered
[ 0.716756] Asymmetric key parser 'x509' registered
[ 0.718209] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.720440] io scheduler mq-deadline registered
[ 0.721768] io scheduler kyber registered
[ 0.723045] io scheduler bfq registered
[ 0.725525] ERST DBG: ERST support is disabled.
[ 0.727456] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.730789] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.737557] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.740830] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.743032] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.746068] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.748500] scsi host0: ata_piix
[ 0.749872] scsi host1: ata_piix
[ 0.751262] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.753501] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.755652] hv_vmbus: registering driver hv_netvsc
[ 0.757231] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.760322] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.761762] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.763251] hv_vmbus: registering driver hyperv_keyboard
[ 0.764890] rtc_cmos 00:05: RTC can wake from S4
[ 0.766977] rtc_cmos 00:05: registered as rtc0
[ 0.768412] rtc_cmos 00:05: setting system clock to 2026-08-21T11:46:54 UTC (1787312814)
[ 0.770865] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.773072] intel_pstate: CPU model not supported
[ 0.774614] gre: GRE over IPv4 demultiplexer driver
[ 0.776266] NET: Registered PF_INET6 protocol family
[ 0.777036] Freeing initrd memory: 10596K
[ 0.778157] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.778470] Segment Routing with IPv6
[ 0.778483] In-situ OAM (IOAM) with IPv6
[ 0.778697] Key type dns_resolver registered
[ 0.778790] IPI shorthand broadcast: enabled
[ 0.781055] sched_clock: Marking stable (568007967, 212883100)->(811672559, -30781492)
[ 0.789512] registered taskstats version 1
[ 0.790940] Loading compiled-in X.509 certificates
[ 0.795732] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.800309] Demotion targets for Node 0: null
[ 0.801854] Key type .fscrypt registered
[ 0.803065] Key type fscrypt-provisioning registered
[ 0.908940] ata2: found unknown device (class 0)
[ 0.917518] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.928934] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.960390] Freeing unused kernel image (initmem) memory: 2996K
[ 0.967477] Write protecting the kernel read-only data: 26624k
[ 0.977973] Freeing unused kernel image (text/rodata gap) memory: 1732K
[ 0.985187] Freeing unused kernel image (rodata/data gap) memory: 396K
[ 0.989880] rodata_test: all tests were successful
[ 0.992877] Run /init as init process
[ 1.005743] Alpine Init 3.14.0-r0
[ 1.007708] Loading boot drivers...
[ 1.026358] ACPI: bus type USB registered
[ 1.027665] usbcore: registered new interface driver usbfs
[ 1.029423] usbcore: registered new interface driver hub
[ 1.031107] usbcore: registered new device driver usb
[ 1.035609] usbcore: registered new interface driver usb-storage
[ 1.097353] loop: module loaded
[ 1.126473] ACPI: bus type drm_connector registered
[ 1.147455] Loading boot drivers: ok.
[ 1.150214] Mounting root...
[ 1.166305] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.168560] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.175943] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.177390] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.179626] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.193290] Console: switching to colour frame buffer device 160x50
[ 1.195844] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.226711] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.248328] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.276046] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.280106] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.283470] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.287433] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.334861] block sr0: the capability attribute has been deprecated.
[ 1.865241] EXT4-fs (vda): mounted filesystem 7af5430b-f94c-484c-8fe6-36878b6de03a ro with ordered data mode. Quota mode: none.
[ 1.878480] Mounting root: ok.
[ 2.389903] random: crng init done
Welcome to Alpine Linux 3.24
Kernel 6.18.35-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.6-r0 -> 3.0.7-r0)
(2/2) Upgrading apk-tools (3.0.6-r0 -> 3.0.7-r0)
Executing busybox-1.37.0-r31.trigger
Continuing with the main upgrade transaction:
( 1/21) Upgrading libblkid (2.42-r0 -> 2.42.1-r0)
( 2/21) Upgrading blkid (2.42-r0 -> 2.42.1-r0)
( 3/21) Upgrading libsmartcols (2.42-r0 -> 2.42.1-r0)
( 4/21) Upgrading partx (2.42-r0 -> 2.42.1-r0)
( 5/21) Upgrading libuuid (2.42-r0 -> 2.42.1-r0)
( 6/21) Upgrading libfdisk (2.42-r0 -> 2.42.1-r0)
( 7/21) Upgrading sfdisk (2.42-r0 -> 2.42.1-r0)
( 8/21) Upgrading libexpat (2.8.1-r0 -> 2.8.3-r0)
( 9/21) Upgrading python3 (3.14.5-r0 -> 3.14.7-r1)
(10/21) Upgrading python3-pycache-pyc0 (3.14.5-r0 -> 3.14.7-r1)
(11/21) Upgrading pyc (3.14.5-r0 -> 3.14.7-r1)
(12/21) Upgrading python3-pyc (3.14.5-r0 -> 3.14.7-r1)
(13/21) Upgrading py3-charset-normalizer (3.4.7-r0 -> 3.4.9-r0)
(14/21) Upgrading py3-charset-normalizer-pyc (3.4.7-r0 -> 3.4.9-r0)
(15/21) Upgrading tzdata (2026b-r0 -> 2026c-r0)
(16/21) Upgrading device-mapper-libs (2.03.35-r2 -> 2.03.35-r3)
(17/21) Upgrading linux-virt (6.18.35-r0 -> 6.18.44-r0)
(18/21) Upgrading libmount (2.42-r0 -> 2.42.1-r0)
(19/21) Upgrading mount (2.42-r0 -> 2.42.1-r0)
(20/21) Upgrading libnvmemi (1.16.1-r1 -> 1.16.2-r0)
(21/21) Upgrading libnvme (1.16.1-r1 -> 1.16.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.14.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.44-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 131.4 MiB in 201 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/12) Installing brotli-libs (1.2.0-r1)
( 2/12) Installing c-ares (1.34.8-r0)
( 3/12) Installing libunistring (1.4.2-r0)
( 4/12) Installing libidn2 (2.3.8-r0)
( 5/12) Installing nghttp2-libs (1.69.0-r0)
( 6/12) Installing libpsl (0.21.5-r3)
( 7/12) Installing libcurl (8.21.0-r0)
( 8/12) Installing pcre2 (10.47-r1)
( 9/12) Installing git (2.54.0-r0)
(10/12) Installing git-init-template (2.54.0-r0)
(11/12) Installing gnu-libiconv-libs (1.18-r0)
(12/12) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r31.trigger
OK: 144.1 MiB in 213 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/tdv.git tdv
Cloning into 'tdv'...
remote: Enumerating objects: 1462, done.
remote: Counting objects: 100% (260/260), done.
remote: Compressing objects: 100% (255/255), done.
remote: Total 1462 (delta 158), reused 0 (delta 0), pack-reused 1202 (from 1)
Receiving objects: 100% (1462/1462), 614.82 KiB | 25.62 MiB/s, done.
Resolving deltas: 100% (1002/1002), done.
Submodule 'liberty' (https://git.janouch.name/p/liberty.git) registered for path 'liberty'
Submodule 'termo' (https://git.janouch.name/p/termo.git) registered for path 'termo'
Cloning into '/home/ci/tdv/liberty'...
remote: Enumerating objects: 971, done.
remote: Counting objects: 100% (440/440), done.
remote: Compressing objects: 100% (437/437), done.
remote: Total 971 (delta 282), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (971/971), 474.50 KiB | 18.25 MiB/s, done.
Resolving deltas: 100% (603/603), done.
Cloning into '/home/ci/tdv/termo'...
remote: Enumerating objects: 1982, done.
remote: Counting objects: 100% (43/43), done.
remote: Compressing objects: 100% (42/42), done.
remote: Total 1982 (delta 15), reused 0 (delta 0), pack-reused 1939 (from 1)
Receiving objects: 100% (1982/1982), 1.39 MiB | 25.05 MiB/s, done.
Resolving deltas: 100% (1260/1260), done.
Submodule path 'liberty': checked out 'fbb577f3f819c12907d0c05a5cf49ed9bb00b8be'
Submodule path 'termo': checked out 'a8f3f6eca3fec9e7faf85d97201a567d73636662'
+ cd tdv
+ git -c 'advice.detachedHead=false' checkout 3dd8bee5186e68eefc6d46ffef92ee7565f05828
HEAD is now at 3dd8bee MSYS2: move to supported ucrt64
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=3dd8bee
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/3dd8bee/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake asciidoctor gtk+3.0-dev ncurses-dev icu-dev rsvg-convert
( 1/215) Installing gmp (6.3.0-r4)
( 2/215) Installing ruby-libs (3.4.9-r0)
( 3/215) Installing libucontext (1.5.1-r0)
( 4/215) Installing ruby (3.4.9-r0)
( 5/215) Installing asciidoctor (2.0.26-r0)
( 6/215) Installing jansson (2.15.0-r0)
( 7/215) Installing binutils (2.45.1-r1)
( 8/215) Installing libmagic (5.47-r2)
( 9/215) Installing file (5.47-r2)
( 10/215) Installing libgcc-static (15.2.0-r5)
( 11/215) Installing libgomp (15.2.0-r5)
( 12/215) Installing libatomic (15.2.0-r5)
( 13/215) Installing isl26 (0.26-r2)
( 14/215) Installing mpfr4 (4.2.2-r0)
( 15/215) Installing mpc1 (1.3.1-r1)
( 16/215) Installing gcc (15.2.0-r5)
( 17/215) Installing libstdc++-dev (15.2.0-r5)
( 18/215) Installing musl-dev (1.2.6-r2)
( 19/215) Installing g++ (15.2.0-r5)
( 20/215) Installing make (4.4.1-r4)
( 21/215) Installing fortify-headers (3.0.1-r2)
( 22/215) Installing patch (2.8-r0)
( 23/215) Installing build-base (0.5-r4)
( 24/215) Installing acl-libs (2.3.2-r1)
( 25/215) Installing lz4-libs (1.10.0-r1)
( 26/215) Installing libarchive (3.8.7-r0)
( 27/215) Installing rhash-libs (1.4.6-r0)
( 28/215) Installing libuv (1.52.1-r0)
( 29/215) Installing cmake (4.2.3-r0)
( 30/215) Installing pkgconf (2.5.1-r0)
( 31/215) Installing libintl (1.0-r0)
( 32/215) Installing glib (2.88.1-r1)
( 33/215) Installing libxml2 (2.13.9-r2)
( 34/215) Installing shared-mime-info (2.4-r7)
( 35/215) Installing bubblewrap (0.11.2-r0)
( 36/215) Installing libpng (1.6.58-r1)
( 37/215) Installing freetype (2.14.3-r0)
( 38/215) Installing fontconfig (2.17.1-r1)
( 39/215) Installing lcms2 (2.19-r0)
( 40/215) Installing libglycin (2.1.5-r0)
Executing libglycin-2.1.5-r0.post-install
* glycin loaders got split into their individual subpackages.
* By default, only glycin-image-rs & glycin-svg are installed.
* Additional loader subpackages are glycin-heif, glycin-jxl & glycin-raw.
*
* To install all available loaders, install glycin-loaders-all.
*
* Also the glycin-thumbnailer got subpackaged and isn't installed by default.
( 41/215) Installing glycin-image-rs (2.1.5-r0)
( 42/215) Installing libxau (1.0.12-r0)
( 43/215) Installing libxdmcp (1.1.5-r1)
( 44/215) Installing libxcb (1.17.0-r2)
( 45/215) Installing libx11 (1.8.13-r0)
( 46/215) Installing libxext (1.3.7-r0)
( 47/215) Installing libxrender (0.9.12-r0)
( 48/215) Installing pixman (0.46.4-r0)
( 49/215) Installing cairo (1.18.4-r1)
( 50/215) Installing libdav1d (1.5.3-r0)
( 51/215) Installing libxft (2.3.9-r0)
( 52/215) Installing fribidi (1.0.16-r3)
( 53/215) Installing graphite2 (1.3.14-r6)
( 54/215) Installing harfbuzz (13.2.1-r0)
( 55/215) Installing pango (1.57.1-r0)
( 56/215) Installing librsvg (2.62.3-r0)
( 57/215) Installing glycin-svg (2.1.5-r0)
( 58/215) Installing gdk-pixbuf (2.44.7-r1)
( 59/215) Installing bzip2-dev (1.0.8-r6)
( 60/215) Installing libxml2-utils (2.13.9-r2)
( 61/215) Installing docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.post-install
( 62/215) Installing libxslt (1.1.43-r3)
( 63/215) Installing docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.post-install
( 64/215) Installing docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.post-install
( 65/215) Installing docbook-xsl (1.79.2-r13)
( 66/215) Installing xz (5.8.3-r0)
( 67/215) Installing gettext-asprintf (1.0-r0)
( 68/215) Installing gettext-libs (1.0-r0)
( 69/215) Installing gettext-envsubst (1.0-r0)
( 70/215) Installing gettext (1.0-r0)
( 71/215) Installing gettext-dev (1.0-r0)
( 72/215) Installing py3-parsing (3.3.2-r1)
( 73/215) Installing py3-parsing-pyc (3.3.2-r1)
( 74/215) Installing py3-packaging (26.2-r0)
( 75/215) Installing py3-packaging-pyc (26.2-r0)
( 76/215) Installing linux-headers (7.0.0-r1)
( 77/215) Installing libffi-dev (3.5.2-r1)
( 78/215) Installing bsd-compat-headers (0.7.2-r6)
( 79/215) Installing libformw (6.6_p20260516-r0)
( 80/215) Installing libmenuw (6.6_p20260516-r0)
( 81/215) Installing libncurses++ (6.6_p20260516-r0)
( 82/215) Installing ncurses-dev (6.6_p20260516-r0)
( 83/215) Installing libedit-dev (20260508.3.1-r1)
( 84/215) Installing zlib-dev (1.3.2-r0)
( 85/215) Installing libpcre2-16 (10.47-r1)
( 86/215) Installing libpcre2-32 (10.47-r1)
( 87/215) Installing pcre2-dev (10.47-r1)
( 88/215) Installing liblastlog2 (2.42.1-r0)
( 89/215) Installing sqlite (3.53.2-r0)
( 90/215) Installing sqlite-dev (3.53.2-r0)
( 91/215) Installing util-linux-dev (2.42.1-r0)
( 92/215) Installing glib-dev (2.88.1-r1)
( 93/215) Installing expat (2.8.3-r0)
( 94/215) Installing expat-dev (2.8.3-r0)
( 95/215) Installing brotli (1.2.0-r1)
( 96/215) Installing brotli-dev (1.2.0-r1)
( 97/215) Installing libpng-dev (1.6.58-r1)
( 98/215) Installing freetype-dev (2.14.3-r0)
( 99/215) Installing fontconfig-dev (2.17.1-r1)
(100/215) Installing lcms2-plugins (2.19-r0)
(101/215) Installing libjpeg-turbo (3.1.3-r0)
(102/215) Installing libturbojpeg (3.1.3-r0)
(103/215) Installing libjpeg-turbo-dev (3.1.3-r0)
(104/215) Installing libsharpyuv (1.6.0-r0)
(105/215) Installing libwebp (1.6.0-r0)
(106/215) Installing tiff (4.7.1-r0)
(107/215) Installing libtiffxx (4.7.1-r0)
(108/215) Installing libwebpdecoder (1.6.0-r0)
(109/215) Installing libwebpdemux (1.6.0-r0)
(110/215) Installing libwebpmux (1.6.0-r0)
(111/215) Installing libwebp-dev (1.6.0-r0)
(112/215) Installing zstd (1.5.7-r2)
(113/215) Installing zstd-dev (1.5.7-r2)
(114/215) Installing tiff-dev (4.7.1-r0)
(115/215) Installing lcms2-dev (2.19-r0)
(116/215) Installing libseccomp-dev (2.6.0-r2)
(117/215) Installing libglycin-dev (2.1.5-r0)
(118/215) Installing gdk-pixbuf-dev (2.44.7-r1)
(119/215) Installing xorgproto (2025.1-r0)
(120/215) Installing libxau-dev (1.0.12-r0)
(121/215) Installing xcb-proto (1.17.0-r1)
(122/215) Installing xcb-proto-pyc (1.17.0-r1)
(123/215) Installing libxdmcp-dev (1.1.5-r1)
(124/215) Installing libxcb-dev (1.17.0-r2)
(125/215) Installing xtrans (1.6.0-r0)
(126/215) Installing libx11-dev (1.8.13-r0)
(127/215) Installing libepoxy (1.5.10-r1)
(128/215) Installing hwdata-pci (0.408-r0)
(129/215) Installing libpciaccess (0.19-r0)
(130/215) Installing libdrm (2.4.134-r0)
(131/215) Installing libpciaccess-dev (0.19-r0)
(132/215) Installing libdrm-dev (2.4.134-r0)
(133/215) Installing libxdamage (1.1.7-r0)
(134/215) Installing libxfixes (6.0.2-r0)
(135/215) Installing libxfixes-dev (6.0.2-r0)
(136/215) Installing libxdamage-dev (1.1.7-r0)
(137/215) Installing libxshmfence (1.3.3-r0)
(138/215) Installing libxshmfence-dev (1.3.3-r0)
(139/215) Installing llvm22-libs (22.1.3-r0)
(140/215) Installing spirv-tools (1.4.341.0-r0)
(141/215) Installing mesa (26.1.6-r0)
(142/215) Installing mesa-gles (26.1.6-r0)
(143/215) Installing mesa-gbm (26.1.6-r0)
(144/215) Installing wayland-libs-client (1.25.0-r0)
(145/215) Installing mesa-egl (26.1.6-r0)
(146/215) Installing libxxf86vm (1.1.7-r0)
(147/215) Installing mesa-gl (26.1.6-r0)
(148/215) Installing clang22-headers (22.1.3-r2)
(149/215) Installing libclc (22.1.3-r0)
(150/215) Installing spirv-llvm-translator-libs (22.1.0-r0)
(151/215) Installing clang22-libs (22.1.3-r2)
(152/215) Installing mesa-rusticl (26.1.6-r0)
(153/215) Installing libxext-dev (1.3.7-r0)
(154/215) Installing libxxf86vm-dev (1.1.7-r0)
(155/215) Installing mesa-dev (26.1.6-r0)
(156/215) Installing libepoxy-dev (1.5.10-r1)
(157/215) Installing libxi (1.8.3-r0)
(158/215) Installing libxi-dev (1.8.3-r0)
(159/215) Installing libxinerama (1.1.6-r0)
(160/215) Installing libxinerama-dev (1.1.6-r0)
(161/215) Installing xkeyboard-config (2.47-r0)
(162/215) Installing libxkbcommon (1.13.1-r0)
(163/215) Installing libxkbcommon-x11 (1.13.1-r0)
(164/215) Installing xz-dev (5.8.3-r0)
(165/215) Installing libxml2-dev (2.13.9-r2)
(166/215) Installing libxkbcommon-dev (1.13.1-r0)
(167/215) Installing wayland-libs-cursor (1.25.0-r0)
(168/215) Installing wayland-protocols (1.48-r0)
(169/215) Installing gobject-introspection (1.86.0-r1)
(170/215) Installing libxcomposite (0.4.7-r0)
(171/215) Installing libxcursor (1.2.3-r0)
(172/215) Installing libxrandr (1.5.5-r0)
(173/215) Installing libatk-1.0 (2.60.5-r0)
(174/215) Installing dbus-libs (1.16.2-r2)
(175/215) Installing at-spi2-core-libs (2.60.5-r0)
(176/215) Installing libxtst (1.2.5-r0)
(177/215) Installing at-spi2-core (2.60.5-r0)
(178/215) Installing libatk-bridge-2.0 (2.60.5-r0)
(179/215) Installing cairo-gobject (1.18.4-r1)
(180/215) Installing avahi-libs (0.9_rc4-r0)
(181/215) Installing nettle (3.10.2-r0)
(182/215) Installing libtasn1 (4.21.0-r0)
(183/215) Installing p11-kit (0.26.2-r0)
(184/215) Installing gnutls (3.8.13-r0)
(185/215) Installing cups-libs (2.4.19-r0)
(186/215) Installing wayland-libs-egl (1.25.0-r0)
(187/215) Installing gtk+3.0 (3.24.52-r0)
(188/215) Installing dbus-dev (1.16.2-r2)
(189/215) Installing libxtst-dev (1.2.5-r0)
(190/215) Installing at-spi2-core-dev (2.60.5-r0)
(191/215) Installing cairo-tools (1.18.4-r1)
(192/215) Installing pixman-dev (0.46.4-r0)
(193/215) Installing libxrender-dev (0.9.12-r0)
(194/215) Installing cairo-dev (1.18.4-r1)
(195/215) Installing fribidi-dev (1.0.16-r3)
(196/215) Installing pango-tools (1.57.1-r0)
(197/215) Installing harfbuzz-cairo (13.2.1-r0)
(198/215) Installing harfbuzz-gobject (13.2.1-r0)
(199/215) Installing icu-data-en (78.1-r0)
Executing icu-data-en-78.1-r0.post-install
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
(200/215) Installing icu-libs (78.1-r0)
(201/215) Installing harfbuzz-icu (13.2.1-r0)
(202/215) Installing harfbuzz-subset (13.2.1-r0)
(203/215) Installing graphite2-dev (1.3.14-r6)
(204/215) Installing icu (78.1-r0)
(205/215) Installing icu-dev (78.1-r0)
(206/215) Installing harfbuzz-dev (13.2.1-r0)
(207/215) Installing libxft-dev (2.3.9-r0)
(208/215) Installing pango-dev (1.57.1-r0)
(209/215) Installing wayland-libs-server (1.25.0-r0)
(210/215) Installing wayland-dev (1.25.0-r0)
(211/215) Installing libxcomposite-dev (0.4.7-r0)
(212/215) Installing libxcursor-dev (1.2.3-r0)
(213/215) Installing libxrandr-dev (1.5.5-r0)
(214/215) Installing gtk+3.0-dev (3.24.52-r0)
(215/215) Installing rsvg-convert (2.62.3-r0)
Executing busybox-1.37.0-r31.trigger
Executing glib-2.88.1-r1.trigger
Executing shared-mime-info-2.4-r7.trigger
Executing gdk-pixbuf-2.44.7-r1.trigger
Executing gtk+3.0-3.24.52-r0.trigger
OK: 1101.9 MiB in 428 packages
+ doas apk add --no-interactive mingw-w64-gcc i686-mingw-w64-gcc coreutils rsvg-convert icoutils cmake make pkgconf gettext gtk-update-icon-cache wine curl libarchive-tools ncurses
( 1/74) Installing coreutils-env (9.11-r0)
( 2/74) Installing coreutils-fmt (9.11-r0)
( 3/74) Installing coreutils-sha512sum (9.11-r0)
( 4/74) Installing libattr (2.5.2-r2)
( 5/74) Installing coreutils (9.11-r0)
( 6/74) Installing curl (8.21.0-r0)
( 7/74) Installing hicolor-icon-theme (0.18-r0)
( 8/74) Installing gtk-update-icon-cache (3.24.52-r0)
( 9/74) Installing i686-mingw-w64-binutils (2.45.1-r0)
(10/74) Installing i686-mingw-w64-crt (14.0.0-r0)
(11/74) Installing i686-mingw-w64-headers (14.0.0-r0)
(12/74) Installing i686-mingw-w64-winpthreads (14.0.0-r0)
(13/74) Installing i686-mingw-w64-gcc (15.2.0-r0)
(14/74) Installing perl (5.42.2-r0)
(15/74) Installing perl-error (0.17030-r0)
(16/74) Installing perl-git (2.54.0-r0)
(17/74) Installing git-perl (2.54.0-r0)
(18/74) Installing perl-http-date (6.06-r0)
(19/74) Installing perl-clone (0.50-r0)
(20/74) Installing perl-mime-base32 (1.303-r3)
(21/74) Installing perl-mime-base64 (3.16-r7)
(22/74) Installing perl-uri (5.34-r0)
(23/74) Installing perl-io-html (1.004-r1)
(24/74) Installing perl-encode-locale (1.05-r5)
(25/74) Installing perl-lwp-mediatypes (6.04-r3)
(26/74) Installing perl-http-message (7.02-r0)
(27/74) Installing perl-http-cookies (6.11-r0)
(28/74) Installing perl-net-http (6.24-r0)
(29/74) Installing perl-html-tagset (3.24-r0)
(30/74) Installing perl-html-parser (3.85-r0)
(31/74) Installing perl-file-listing (6.16-r0)
(32/74) Installing perl-www-robotrules (6.02-r5)
(33/74) Installing perl-http-negotiate (6.01-r5)
(34/74) Installing perl-try-tiny (0.32-r0)
(35/74) Installing perl-libwww (6.83-r0)
(36/74) Installing icoutils (0.32.3-r4)
(37/74) Installing libarchive-tools (3.8.7-r0)
(38/74) Installing mingw-w64-binutils (2.45.1-r0)
(39/74) Installing mingw-w64-crt (14.0.0-r0)
(40/74) Installing mingw-w64-headers (14.0.0-r0)
(41/74) Installing mingw-w64-winpthreads (14.0.0-r0)
(42/74) Installing mingw-w64-gcc (15.2.0-r0)
(43/74) Installing ncurses (6.6_p20260516-r0)
(44/74) Installing opencl (2026.05.29-r0)
(45/74) Installing alsa-lib (1.2.15.3-r0)
(46/74) Installing libexif (0.6.26-r0)
(47/74) Installing libltdl (2.6.0-r1)
(48/74) Installing libusb (1.0.30-r0)
(49/74) Installing libgphoto2 (2.5.33-r1)
Executing libgphoto2-2.5.33-r1.pre-install
(50/74) Installing libxv (1.0.13-r0)
(51/74) Installing cdparanoia-libs (10.2-r14)
(52/74) Installing graphene (1.10.8-r5)
(53/74) Installing gstreamer (1.28.3-r0)
(54/74) Installing gstreamer-ptp-helper (1.28.3-r0)
(55/74) Installing libogg (1.3.6-r0)
(56/74) Installing opus (1.6.1-r0)
(57/74) Installing orc (0.4.41-r0)
(58/74) Installing libtheora (1.2.0-r1)
(59/74) Installing libvorbis (1.3.7-r2)
(60/74) Installing gst-plugins-base (1.28.3-r0)
(61/74) Installing libpcap (1.10.6-r1)
(62/74) Installing pcsc-lite-libs (2.4.0-r4)
(63/74) Installing libasyncns (0.8-r5)
(64/74) Installing libflac (1.4.3-r2)
(65/74) Installing lame-libs (3.100-r5)
(66/74) Installing mpg123-libs (1.33.5-r0)
(67/74) Installing libsndfile (1.2.2-r2)
(68/74) Installing soxr (0.1.3-r7)
(69/74) Installing speexdsp (1.2.1-r2)
(70/74) Installing tdb-libs (1.4.15-r1)
(71/74) Installing libpulse (17.0-r7)
(72/74) Installing sane (1.4.0-r4)
Executing sane-1.4.0-r4.pre-install
(73/74) Installing eudev-libs (3.2.14-r6)
(74/74) Installing wine (11.0-r0)
Executing busybox-1.37.0-r31.trigger
Executing gtk-update-icon-cache-3.24.52-r0.trigger
OK: 2572.2 MiB in 502 packages
+ cmake -B build '-DBUILD_TESTING=ON'
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found ZLIB: /usr/lib/libz.so (found version "1.3.2")
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Found Ncursesw: ncursesw
-- Checking for modules 'glib-2.0>=2.38;gio-2.0;pango'
-- Found glib-2.0, version 2.88.1
-- Found gio-2.0, version 2.88.1
-- Found pango, version 1.57.1
-- Checking for modules 'icu-uc;icu-i18n'
-- Found icu-uc, version 78.1
-- Found icu-i18n, version 78.1
-- Found Curses: /usr/lib/libcurses.so
-- Checking for modules 'glib-2.0;gio-2.0'
-- Found glib-2.0, version 2.88.1
-- Found gio-2.0, version 2.88.1
-- Checking for module 'unibilium>=0.1.0'
-- Package 'unibilium' not found
-- Checking for modules 'xcb;xcb-xfixes'
-- Found xcb, version 1.17.0
-- Found xcb-xfixes, version 1.17.0
-- Checking for module 'gtk+-3.0'
-- Found gtk+-3.0, version 3.24.52
-- Looking for resizeterm
-- Looking for resizeterm - found
-- Found Gettext: /usr/bin/msgmerge (found version "1.0")
-- Configuring done (1.1s)
-- Generating done (0.1s)
-- Build files have been written to: /home/ci/tdv/build
+ cmake --build build -- package
[ 3%] Generating cs.gmo
[ 3%] Built target translations_1
[ 6%] Generating man page for tdv.1
[ 6%] Built target docs
[ 10%] Building C object CMakeFiles/stardict.dir/src/dictzip-input-stream.c.o
[ 13%] Building C object CMakeFiles/stardict.dir/src/generator.c.o
[ 17%] Building C object CMakeFiles/stardict.dir/src/stardict.c.o
[ 20%] Building C object CMakeFiles/stardict.dir/src/utils.c.o
[ 20%] Built target stardict
[ 24%] Generating tdv 16x16 application icon
[ 27%] Generating tdv 32x32 application icon
[ 31%] Generating tdv 48x48 application icon
[ 34%] Generating tdv 256x256 application icon
[ 34%] Built target icons
[ 37%] Building C object termo/CMakeFiles/termo-static.dir/termo.c.o
[ 41%] Building C object termo/CMakeFiles/termo-static.dir/driver-csi.c.o
[ 44%] Building C object termo/CMakeFiles/termo-static.dir/driver-ti.c.o
[ 48%] Linking C static library libtermo-0.a
[ 48%] Built target termo-static
[ 51%] Building C object CMakeFiles/tdv.dir/src/tdv.c.o
[ 55%] Building C object CMakeFiles/tdv.dir/src/tdv-tui.c.o
[ 58%] Building C object CMakeFiles/tdv.dir/src/tdv-gui.c.o
[ 62%] Building C object CMakeFiles/tdv.dir/src/stardict-view.c.o
[ 65%] Linking C executable tdv
[ 65%] Built target tdv
[ 68%] Building C object CMakeFiles/tdv-transform.dir/src/tdv-transform.c.o
[ 72%] Linking C executable tdv-transform
[ 72%] Built target tdv-transform
[ 75%] Building C object CMakeFiles/tdv-tabfile.dir/src/tdv-tabfile.c.o
[ 79%] Linking C executable tdv-tabfile
[ 79%] Built target tdv-tabfile
[ 82%] Building C object CMakeFiles/tdv-add-pronunciation.dir/src/tdv-add-pronunciation.c.o
[ 86%] Linking C executable tdv-add-pronunciation
[ 86%] Built target tdv-add-pronunciation
[ 89%] Building C object CMakeFiles/tdv-query-tool.dir/src/tdv-query-tool.c.o
[ 93%] Linking C executable tdv-query-tool
[ 93%] Built target tdv-query-tool
[ 93%] Built target tools
[ 96%] Building C object CMakeFiles/test-stardict.dir/src/test-stardict.c.o
[100%] Linking C executable test-stardict
[100%] Built target test-stardict
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: tdv
CPack: - Install project: tdv []
CPack: Create package
CPack: - package: /home/ci/tdv/build/tdv-3dd8bee-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: tdv
CPack: - Install project: tdv []
CPack: Create package
CPack: - package: /home/ci/tdv/build/tdv-3dd8bee-Linux-x86_64.zip generated.
+ cmake --build build -- test
Running tests...
gmake[1]: Entering directory '/home/ci/tdv/build/termo'
[ 1%] Building C object termo/CMakeFiles/termo.dir/termo.c.o
[ 3%] Building C object termo/CMakeFiles/termo.dir/driver-csi.c.o
[ 5%] Building C object termo/CMakeFiles/termo.dir/driver-ti.c.o
[ 7%] Linking C shared library libtermo-0.so
[ 7%] Built target termo
[ 14%] Built target termo-static
[ 16%] Building C object termo/CMakeFiles/test-01base.dir/tests/01base.c.o
[ 17%] Building C object termo/CMakeFiles/test-01base.dir/tests/taplib.c.o
[ 19%] Linking C executable test-01base
[ 19%] Built target test-01base
[ 21%] Building C object termo/CMakeFiles/test-02getkey.dir/tests/02getkey.c.o
[ 23%] Building C object termo/CMakeFiles/test-02getkey.dir/tests/taplib.c.o
[ 25%] Linking C executable test-02getkey
[ 25%] Built target test-02getkey
[ 26%] Building C object termo/CMakeFiles/test-03utf8.dir/tests/03utf8.c.o
[ 28%] Building C object termo/CMakeFiles/test-03utf8.dir/tests/taplib.c.o
[ 30%] Linking C executable test-03utf8
[ 30%] Built target test-03utf8
[ 32%] Building C object termo/CMakeFiles/test-04flags.dir/tests/04flags.c.o
[ 33%] Building C object termo/CMakeFiles/test-04flags.dir/tests/taplib.c.o
[ 35%] Linking C executable test-04flags
[ 35%] Built target test-04flags
[ 37%] Building C object termo/CMakeFiles/test-05read.dir/tests/05read.c.o
[ 39%] Building C object termo/CMakeFiles/test-05read.dir/tests/taplib.c.o
[ 41%] Linking C executable test-05read
[ 41%] Built target test-05read
[ 42%] Building C object termo/CMakeFiles/test-06buffer.dir/tests/06buffer.c.o
[ 44%] Building C object termo/CMakeFiles/test-06buffer.dir/tests/taplib.c.o
[ 46%] Linking C executable test-06buffer
[ 46%] Built target test-06buffer
[ 48%] Building C object termo/CMakeFiles/test-10keyname.dir/tests/10keyname.c.o
[ 50%] Building C object termo/CMakeFiles/test-10keyname.dir/tests/taplib.c.o
[ 51%] Linking C executable test-10keyname
[ 51%] Built target test-10keyname
[ 53%] Building C object termo/CMakeFiles/test-11strfkey.dir/tests/11strfkey.c.o
[ 55%] Building C object termo/CMakeFiles/test-11strfkey.dir/tests/taplib.c.o
[ 57%] Linking C executable test-11strfkey
[ 57%] Built target test-11strfkey
[ 58%] Building C object termo/CMakeFiles/test-12strpkey.dir/tests/12strpkey.c.o
[ 60%] Building C object termo/CMakeFiles/test-12strpkey.dir/tests/taplib.c.o
[ 62%] Linking C executable test-12strpkey
[ 62%] Built target test-12strpkey
[ 64%] Building C object termo/CMakeFiles/test-13cmpkey.dir/tests/13cmpkey.c.o
[ 66%] Building C object termo/CMakeFiles/test-13cmpkey.dir/tests/taplib.c.o
[ 67%] Linking C executable test-13cmpkey
[ 67%] Built target test-13cmpkey
[ 69%] Building C object termo/CMakeFiles/test-20canon.dir/tests/20canon.c.o
[ 71%] Building C object termo/CMakeFiles/test-20canon.dir/tests/taplib.c.o
[ 73%] Linking C executable test-20canon
[ 73%] Built target test-20canon
[ 75%] Building C object termo/CMakeFiles/test-30mouse.dir/tests/30mouse.c.o
[ 76%] Building C object termo/CMakeFiles/test-30mouse.dir/tests/taplib.c.o
[ 78%] Linking C executable test-30mouse
[ 78%] Built target test-30mouse
[ 80%] Building C object termo/CMakeFiles/test-31position.dir/tests/31position.c.o
[ 82%] Building C object termo/CMakeFiles/test-31position.dir/tests/taplib.c.o
[ 83%] Linking C executable test-31position
[ 83%] Built target test-31position
[ 85%] Building C object termo/CMakeFiles/test-32modereport.dir/tests/32modereport.c.o
[ 87%] Building C object termo/CMakeFiles/test-32modereport.dir/tests/taplib.c.o
[ 89%] Linking C executable test-32modereport
[ 89%] Built target test-32modereport
[ 91%] Building C object termo/CMakeFiles/test-33focus.dir/tests/33focus.c.o
[ 92%] Building C object termo/CMakeFiles/test-33focus.dir/tests/taplib.c.o
[ 94%] Linking C executable test-33focus
[ 94%] Built target test-33focus
[ 96%] Building C object termo/CMakeFiles/test-39csi.dir/tests/39csi.c.o
[ 98%] Building C object termo/CMakeFiles/test-39csi.dir/tests/taplib.c.o
[100%] Linking C executable test-39csi
[100%] Built target test-39csi
gmake[1]: Leaving directory '/home/ci/tdv/build/termo'
Test project /home/ci/tdv/build
Start 1: test-xmlwf-tdv.xml
1/21 Test #1: test-xmlwf-tdv.xml ............... Passed 0.00 sec
Start 2: test-xmllint-tdv.xml
2/21 Test #2: test-xmllint-tdv.xml ............. Passed 0.00 sec
Start 3: test-xmlwf-tdv.svg
3/21 Test #3: test-xmlwf-tdv.svg ............... Passed 0.00 sec
Start 4: test-xmllint-tdv.svg
4/21 Test #4: test-xmllint-tdv.svg ............. Passed 0.00 sec
Start 5: test-stardict
5/21 Test #5: test-stardict .................... Passed 0.06 sec
Start 6: termo.01base
6/21 Test #6: termo.01base ..................... Passed 0.00 sec
Start 7: termo.02getkey
7/21 Test #7: termo.02getkey ................... Passed 0.00 sec
Start 8: termo.03utf8
8/21 Test #8: termo.03utf8 ..................... Passed 0.00 sec
Start 9: termo.04flags
9/21 Test #9: termo.04flags .................... Passed 0.00 sec
Start 10: termo.05read
10/21 Test #10: termo.05read ..................... Passed 0.00 sec
Start 11: termo.06buffer
11/21 Test #11: termo.06buffer ................... Passed 0.00 sec
Start 12: termo.10keyname
12/21 Test #12: termo.10keyname .................. Passed 0.00 sec
Start 13: termo.11strfkey
13/21 Test #13: termo.11strfkey .................. Passed 0.00 sec
Start 14: termo.12strpkey
14/21 Test #14: termo.12strpkey .................. Passed 0.00 sec
Start 15: termo.13cmpkey
15/21 Test #15: termo.13cmpkey ................... Passed 0.00 sec
Start 16: termo.20canon
16/21 Test #16: termo.20canon .................... Passed 0.00 sec
Start 17: termo.30mouse
17/21 Test #17: termo.30mouse .................... Passed 0.00 sec
Start 18: termo.31position
18/21 Test #18: termo.31position ................. Passed 0.00 sec
Start 19: termo.32modereport
19/21 Test #19: termo.32modereport ............... Passed 0.00 sec
Start 20: termo.33focus
20/21 Test #20: termo.33focus .................... Passed 0.00 sec
Start 21: termo.39csi
21/21 Test #21: termo.39csi ...................... Passed 0.00 sec
100% tests passed, 0 tests failed out of 21
Total Test time (real) = 0.09 sec
+ cmake --build build -- dicts
[ 40%] Built target stardict
[ 60%] Built target tdv-tabfile
[ 70%] Generating sample dictionary slovnik-cizich-slov
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 0
[ 70%] Built target dicts-slovnik-cizich-slov
[ 80%] Generating sample dictionary czech-wordnet
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 145 100 145 0 0 3098 0 0
100 145 100 145 0 0 2613 0 0
100 128 100 128 0 0 1333 0 0
100 437.3k 100 437.3k 0 0 1.18M 0 0
bsdtar: Error opening archive: Unrecognized archive format
[ 80%] Built target dicts-czech-wordnet
[ 90%] Generating sample dictionary gnu-fdl-de-cz
[ 90%] Built target dicts-gnu-fdl-de-cz
[100%] Generating sample dictionary gnu-fdl-en-cz
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 zcat: no gzip/bzip2/xz magic 0 0 0
100 3245 100 3245 0 0 27147 0 0
[100%] Built target dicts-gnu-fdl-en-cz
[100%] Built target dicts
+ sh -e ./cmake/Win64Depends.sh
-- Fetching repository DB
######################################################################### 100.0%
-- Resolving mingw-w64-ucrt-x86_64-gtk3 mingw-w64-ucrt-x86_64-icu mingw-w64-ucrt-x86_64-gcc-libs
-- Fetching mingw-w64-ucrt-x86_64-gtk3-3.24.52-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-pango-1.58.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-cairo-1.18.4-4-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-freetype-2.14.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-brotli-1.2.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-bzip2-1.0.8-4-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libpng-1.6.58-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-zlib-1.3.2-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-harfbuzz-14.3.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-glib2-2.88.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-gettext-runtime-1.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libiconv-1.19-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libffi-3.8.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-pcre2-10.47-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-wineditline-2.208-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-python-3.14.7-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-tk-8.6.18-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-tcl-8.6.18-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libb2-0.98.1-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-xz-5.8.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-tzdata-2026c-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-expat-2.8.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-mpdecimal-4.0.1-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-ncurses-6.6-4-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libsystre-1.0.2-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libtre-0.9.0-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-openssl-3.6.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-sqlite3-3.53.4-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-python-packaging-26.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-graphite2-1.3.15-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-fontconfig-2.18.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-lzo2-2.10-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-pixman-0.46.4-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-fribidi-1.0.16-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libthai-0.1.30-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libdatrie-0.2.14-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-shared-mime-info-2.5.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libxml2-2.15.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-gtk-update-icon-cache-3.24.52-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-gdk-pixbuf2-2.44.7-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libjpeg-turbo-3.2.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libtiff-4.7.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-jbigkit-2.1-6-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-lerc-4.1.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libdeflate-1.25-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libwebp-1.6.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-giflib-6.1.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-zstd-1.5.7-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-librsvg-2.62.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-hicolor-icon-theme-0.18-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-adwaita-icon-theme-50.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-adwaita-icon-theme-legacy-46.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-atk-2.60.6-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-json-glib-1.10.8-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libepoxy-1.5.10-7-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-egl-headers-1.5.r284.3ae2b7c-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-gles-headers-3.2.r1065.7fc154c-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-icu-78.3-4-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-gcc-libs-16.2.0-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libwinpthread-14.0.0.r283.ga7cb47123-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Verifying checksums
-- Extracting packages
-- Configuring packages
wine: created the configuration directory '/home/ci/.wine'
002c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
004c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
0054:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
error: XDG_RUNTIME_DIR is invalid or not set in the environment.
0054:err:vulkan:vulkan_init_once Failed to load libvulkan.so.1
error: XDG_RUNTIME_DIR is invalid or not set in the environment.
0054:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0054:err:winediag:nodrv_CreateWindow L"The explorer process failed to start."
0054:err:systray:initialize_systray Could not create tray window
0054:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr 0x80004002
0054:err:ole:CoMarshalInterface Failed to marshal the interface {6d5140c1-7436-11ce-8034-00aa006009fa}, hr 0x80004002
0054:err:ole:apartment_get_local_server_stream Failed: 0x80004002
002c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
002c:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
004c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
004c:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
004c:err:ole:apartment_createwindowifneeded CreateWindow failed with error 3
004c:err:ole:apartment_createwindowifneeded CreateWindow failed with error 0
004c:err:ole:apartment_createwindowifneeded CreateWindow failed with error 14007
004c:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr 0x800736b7
004c:err:ole:CoMarshalInterface Failed to marshal the interface {6d5140c1-7436-11ce-8034-00aa006009fa}, hr 0x800736b7
004c:err:ole:apartment_get_local_server_stream Failed: 0x800736b7
004c:err:ole:start_rpcss Failed to open RpcSs service
0044:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0044:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
0098:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0098:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
00a0:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
00a0:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
00e4:fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
00e4:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
00e4:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0100:err:ntoskrnl:ZwLoadDriver failed to create driver L"\\Registry\\Machine\\System\\CurrentControlSet\\Services\\winebth": c00000e5
002c:err:setupapi:SetupDiInstallDevice Failed to start service L"winebth" for device L"ROOT\\WINE\\WINEBTH", error 1359.
002c:err:setupapi:SetupDiInstallDevice Failed to control service L"winebth" for device L"ROOT\\WINE\\WINEBTH", error 1062.
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
012c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
012c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0024:fixme:reg:NtNotifyChangeMultipleKeys Unimplemented optional parameter
0024:fixme:reg:NtNotifyChangeMultipleKeys Unimplemented optional parameter
0024:fixme:reg:NtNotifyChangeMultipleKeys Unimplemented optional parameter
0024:fixme:reg:NtNotifyChangeMultipleKeys Unimplemented optional parameter
0024:fixme:reg:NtNotifyChangeMultipleKeys Unimplemented optional parameter
-- Success
+ toolchain=/home/ci/tdv/liberty/cmake/toolchains/MinGW-w64-x64.cmake
+ cmake -B build-Win64 '-DBUILD_TESTING=ON' '-DCMAKE_TOOLCHAIN_FILE=/home/ci/tdv/liberty/cmake/toolchains/MinGW-w64-x64.cmake'
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/x86_64-w64-mingw32-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found ZLIB: /home/ci/tdv/ucrt64/lib/libz.dll.a (found version "1.3.2")
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Found Ncursesw: ncursesw;systre;tre;intl;iconv;pcre2-posix
-- Checking for modules 'glib-2.0>=2.38;gio-2.0;pango'
-- Found glib-2.0, version 2.88.3
-- Found gio-2.0, version 2.88.3
-- Found pango, version 1.58.2
-- Checking for modules 'icu-uc;icu-i18n'
-- Found icu-uc, version 78.3
-- Found icu-i18n, version 78.3
-- Checking for modules 'xcb;xcb-xfixes'
-- Package 'xcb' not found
-- Package 'xcb-xfixes' not found
-- Checking for module 'gtk+-3.0'
-- Found gtk+-3.0, version 3.24.52
-- Looking for resizeterm
-- Looking for resizeterm - not found
-- Found Gettext: /usr/bin/msgmerge (found version "1.0")
-- Found LibIntl: /home/ci/tdv/ucrt64/lib/libintl.dll.a
-- Configuring done (0.9s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/tdv/build-Win64
+ cmake --build build-Win64 -- package
[ 4%] Generating cs.gmo
[ 4%] Built target translations_1
[ 8%] Generating man page for tdv.1
[ 8%] Built target docs
[ 13%] Building C object CMakeFiles/stardict.dir/src/dictzip-input-stream.c.obj
[ 17%] Building C object CMakeFiles/stardict.dir/src/generator.c.obj
[ 21%] Building C object CMakeFiles/stardict.dir/src/stardict.c.obj
[ 26%] Building C object CMakeFiles/stardict.dir/src/utils.c.obj
[ 26%] Built target stardict
[ 30%] Generating tdv 16x16 application icon
[ 34%] Generating tdv 32x32 application icon
[ 39%] Generating tdv 48x48 application icon
[ 43%] Generating tdv 256x256 application icon
[ 43%] Built target icons
[ 47%] Generating tdv.rc
[ 52%] Generating Windows program icon
[ 56%] Building C object CMakeFiles/tdv.dir/src/tdv.c.obj
[ 60%] Building RC object CMakeFiles/tdv.dir/tdv.rc.res
[ 65%] Building C object CMakeFiles/tdv.dir/src/tdv-gui.c.obj
[ 69%] Building C object CMakeFiles/tdv.dir/src/stardict-view.c.obj
[ 73%] Linking C executable tdv.exe
[ 91%] Built target tdv
[ 95%] Building C object CMakeFiles/test-stardict.dir/src/test-stardict.c.obj
[100%] Linking C executable test-stardict.exe
[100%] Built target test-stardict
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: tdv
CPack: - Install project: tdv []
gtk-update-icon-cache: Cache file created successfully.
CPack: Create package
CPack: - package: /home/ci/tdv/build-Win64/tdv-3dd8bee-Windows-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: tdv
CPack: - Install project: tdv []
gtk-update-icon-cache: Cache file created successfully.
CPack: Create package
CPack: - package: /home/ci/tdv/build-Win64/tdv-3dd8bee-Windows-x86_64.zip generated.
+ WINEPATH=/home/ci/tdv/ucrt64/bin cmake --build build-Win64 -- test
Running tests...
Test project /home/ci/tdv/build-Win64
Start 1: test-xmlwf-tdv.xml
1/5 Test #1: test-xmlwf-tdv.xml ............... Passed 0.00 sec
Start 2: test-xmllint-tdv.xml
2/5 Test #2: test-xmllint-tdv.xml ............. Passed 0.00 sec
Start 3: test-xmlwf-tdv.svg
3/5 Test #3: test-xmlwf-tdv.svg ............... Passed 0.00 sec
Start 4: test-xmllint-tdv.svg
4/5 Test #4: test-xmllint-tdv.svg ............. Passed 0.00 sec
Start 5: test-stardict
5/5 Test #5: test-stardict .................... Passed 5.52 sec
100% tests passed, 0 tests failed out of 5
Total Test time (real) = 5.53 sec
+ mv build-Win64/tdv-3dd8bee-Windows-x86_64.zip /home/ci/acid-deploy
Deploy log
+ mv -- tdv-3dd8bee-Windows-x86_64.zip /home/acid/cd