- Created
- 2d ago
- Changed
- 2d ago
- Project
- p/logdiag
- Commit
- 7d35ac5cacb62d0148362afbe77e6be6daef91ab
- Runner
- Alpine 3.24
- State
- Success
- Notified
- 1
- Duration
- 2m9s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Loading initramfs-virt....ookk
[ 0.000000] Linux version 6.18.35-0-virt (buildozer@build-3-24-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-06-09 12:34:47
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 10856527260 cycles
[ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000004] tsc: Detected 3096.006 MHz processor
[ 0.000519] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000546] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000548] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000603] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007406] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007613] RAMDISK: [mem 0x7f5a7000-0x7fffffff]
[ 0.007615] ACPI: Early table checksum verification disabled
[ 0.007617] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007621] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007625] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007629] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007631] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007634] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007636] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007638] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007640] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007641] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007642] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007642] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007643] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007643] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.008051] No NUMA configuration found
[ 0.008052] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.008055] NODE_DATA(0) allocated [mem 0x13fff8d40-0x13fffcfff]
[ 0.008075] Zone ranges:
[ 0.008075] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008077] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008078] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008079] Movable zone start for each node
[ 0.008079] Early memory node ranges
[ 0.008080] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.008081] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.008082] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.008082] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.008169] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.008180] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013857] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.014505] ACPI: PM-Timer IO Port: 0x608
[ 0.014519] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.014552] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.014555] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014556] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.014557] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014558] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.014559] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.014562] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.014563] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014570] CPU topo: Max. logical packages: 1
[ 0.014571] CPU topo: Max. logical dies: 1
[ 0.014571] CPU topo: Max. dies per package: 1
[ 0.014574] CPU topo: Max. threads per core: 1
[ 0.014575] CPU topo: Num. cores per package: 4
[ 0.014575] CPU topo: Num. threads per package: 4
[ 0.014576] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.014590] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.014601] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.014602] Booting paravirtualized kernel on KVM
[ 0.014603] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.018138] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.018327] percpu: Embedded 55 pages/cpu s185752 r8192 d31336 u524288
[ 0.018351] kvm-guest: PV spinlocks disabled, no host support
[ 0.018351] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.018393] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4,ena,gve,mana", will be passed to user space.
[ 0.018396] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.018720] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.018881] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.018947] software IO TLB: area num 4.
[ 0.029728] Fallback order for Node 0: 0
[ 0.029732] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.029733] Policy zone: Normal
[ 0.029929] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.041813] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.041876] Kernel/User page tables isolation: enabled
[ 0.042578] Dynamic Preempt: none
[ 0.042724] rcu: Preemptible hierarchical RCU implementation.
[ 0.042725] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.042726] Trampoline variant of Tasks RCU enabled.
[ 0.042726] Tracing variant of Tasks RCU enabled.
[ 0.042727] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.042727] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.042734] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.042735] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.047103] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.047317] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.047629] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.054380] Console: colour VGA+ 80x25
[ 0.054383] printk: legacy console [tty0] enabled
[ 0.090879] printk: legacy console [ttyS0] enabled
[ 0.236033] ACPI: Core revision 20250807
[ 0.237371] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.239877] APIC: Switch to symmetric I/O mode setup
[ 0.241475] x2apic enabled
[ 0.242584] APIC: Switched APIC routing to: physical x2apic
[ 0.245198] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.246823] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.249597] Calibrating delay loop (skipped) preset value.. 6192.01 BogoMIPS (lpj=3096006)
[ 0.252615] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.253597] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.254599] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.255597] Speculative Store Bypass: Vulnerable
[ 0.257598] Spectre V2 : Mitigation: Retpolines
[ 0.258597] ITS: Mitigation: Aligned branch/return thunks
[ 0.259597] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.261597] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.263597] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.265598] active return thunk: its_return_thunk
[ 0.266598] x86/fpu: x87 FPU will use FXSAVE
[ 0.282606] Freeing SMP alternatives memory: 40K
[ 0.283601] pid_max: default: 32768 minimum: 301
[ 0.284866] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.287934] landlock: Up and running.
[ 0.288597] Yama: becoming mindful.
[ 0.289768] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.291600] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.397504] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.397804] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.399621] signal: max sigframe size: 1440
[ 0.400624] rcu: Hierarchical SRCU implementation.
[ 0.401597] rcu: Max phase no-delay instances is 400.
[ 0.403637] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.407780] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.409653] smp: Bringing up secondary CPUs ...
[ 0.411664] smpboot: x86: Booting SMP configuration:
[ 0.412598] .... node #0, CPUs: #1 #2 #3
[ 0.416651] smp: Brought up 1 node, 4 CPUs
[ 0.419597] smpboot: Total of 4 processors activated (24768.04 BogoMIPS)
[ 0.420845] Memory: 3999444K/4193760K available (14650K kernel code, 2032K rwdata, 9844K rodata, 2996K init, 1168K bss, 189432K reserved, 0K cma-reserved)
[ 0.421844] devtmpfs: initialized
[ 0.422666] x86/mm: Memory block size: 128MB
[ 0.424990] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.426602] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.428603] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.431770] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.432688] audit: initializing netlink subsys (disabled)
[ 0.434635] audit: type=2000 audit(1787317625.570:1): state=initialized audit_enabled=0 res=1
[ 0.434653] thermal_sys: Registered thermal governor 'step_wise'
[ 0.436606] cpuidle: using governor ladder
[ 0.438601] cpuidle: using governor menu
[ 0.440621] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.442874] PCI: Using configuration type 1 for base access
[ 0.444686] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.446611] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.447597] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.449710] ACPI: Added _OSI(Module Device)
[ 0.450598] ACPI: Added _OSI(Processor Device)
[ 0.451597] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.453766] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.455844] ACPI: Interpreter enabled
[ 0.456605] ACPI: PM: (supports S0 S3 S5)
[ 0.458598] ACPI: Using IOAPIC for interrupt routing
[ 0.459621] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.461597] PCI: Using E820 reservations for host bridge windows
[ 0.462683] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.466259] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.468602] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.470598] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.473604] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.476883] acpiphp: Slot [3] registered
[ 0.477618] acpiphp: Slot [4] registered
[ 0.479473] acpiphp: Slot [5] registered
[ 0.480624] acpiphp: Slot [6] registered
[ 0.481617] acpiphp: Slot [7] registered
[ 0.482624] acpiphp: Slot [8] registered
[ 0.483618] acpiphp: Slot [9] registered
[ 0.485464] acpiphp: Slot [10] registered
[ 0.486618] acpiphp: Slot [11] registered
[ 0.487618] acpiphp: Slot [12] registered
[ 0.488618] acpiphp: Slot [13] registered
[ 0.489618] acpiphp: Slot [14] registered
[ 0.490618] acpiphp: Slot [15] registered
[ 0.492464] acpiphp: Slot [16] registered
[ 0.493632] acpiphp: Slot [17] registered
[ 0.494618] acpiphp: Slot [18] registered
[ 0.495618] acpiphp: Slot [19] registered
[ 0.496617] acpiphp: Slot [20] registered
[ 0.498645] acpiphp: Slot [21] registered
[ 0.499618] acpiphp: Slot [22] registered
[ 0.500618] acpiphp: Slot [23] registered
[ 0.501613] acpiphp: Slot [24] registered
[ 0.503619] acpiphp: Slot [25] registered
[ 0.504620] acpiphp: Slot [26] registered
[ 0.505617] acpiphp: Slot [27] registered
[ 0.507474] acpiphp: Slot [28] registered
[ 0.508618] acpiphp: Slot [29] registered
[ 0.509635] acpiphp: Slot [30] registered
[ 0.510620] acpiphp: Slot [31] registered
[ 0.511516] PCI host bridge to bus 0000:00
[ 0.513600] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.515598] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.516597] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.519598] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.521598] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.523598] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.524657] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.528228] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.531170] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.535681] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.536659] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.538598] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.540598] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.542598] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.544851] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.548246] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.549612] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.551863] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.557611] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.558627] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.560669] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.562757] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.566192] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.570624] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.572614] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.573649] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.576611] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.580330] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.584455] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.585613] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.587649] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.591782] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.599441] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.600612] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.602671] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.609089] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.610722] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.612709] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.614708] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.616665] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.619074] iommu: Default domain type: Translated
[ 0.620597] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.622768] SCSI subsystem initialized
[ 0.623727] pps_core: LinuxPPS API ver. 1 registered
[ 0.625598] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.628604] PTP clock support registered
[ 0.629945] PCI: Using ACPI for IRQ routing
[ 0.631823] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.633684] clocksource: Switched to clocksource kvm-clock
[ 0.636236] VFS: Disk quotas dquot_6.6.0
[ 0.637550] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.639692] pnp: PnP ACPI init
[ 0.641020] pnp: PnP ACPI: found 6 devices
[ 0.648539] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.651167] NET: Registered PF_INET protocol family
[ 0.652688] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.663086] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.665702] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.668077] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.670461] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.672713] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.674781] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.677025] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.678872] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.680908] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.682452] NET: Registered PF_XDP protocol family
[ 0.683805] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.685460] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.687129] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.688950] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.690742] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.692657] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.694219] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.695909] PCI: CLS 0 bytes, default 64
[ 0.697066] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.697153] Unpacking initramfs...
[ 0.697449] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.702408] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.705449] Initialise system trusted keyrings
[ 0.707319] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.714744] Key type asymmetric registered
[ 0.716041] Asymmetric key parser 'x509' registered
[ 0.717531] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.719917] io scheduler mq-deadline registered
[ 0.721306] io scheduler kyber registered
[ 0.722594] io scheduler bfq registered
[ 0.724852] ERST DBG: ERST support is disabled.
[ 0.726938] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.730412] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.738550] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.752289] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.754783] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.758266] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.760675] scsi host0: ata_piix
[ 0.762014] scsi host1: ata_piix
[ 0.763119] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.765359] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.767584] hv_vmbus: registering driver hv_netvsc
[ 0.769663] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.769783] Freeing initrd memory: 10596K
[ 0.771604] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.775198] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.776697] hv_vmbus: registering driver hyperv_keyboard
[ 0.778319] rtc_cmos 00:05: RTC can wake from S4
[ 0.780352] rtc_cmos 00:05: registered as rtc0
[ 0.781772] rtc_cmos 00:05: setting system clock to 2026-08-21T13:07:05 UTC (1787317625)
[ 0.784152] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.786267] intel_pstate: CPU model not supported
[ 0.787944] gre: GRE over IPv4 demultiplexer driver
[ 0.789524] NET: Registered PF_INET6 protocol family
[ 0.791386] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.791463] Segment Routing with IPv6
[ 0.795118] In-situ OAM (IOAM) with IPv6
[ 0.796492] Key type dns_resolver registered
[ 0.797934] IPI shorthand broadcast: enabled
[ 0.801242] sched_clock: Marking stable (605003770, 195272645)->(826938968, -26662553)
[ 0.803826] registered taskstats version 1
[ 0.805235] Loading compiled-in X.509 certificates
[ 0.810200] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.815224] Demotion targets for Node 0: null
[ 0.816722] Key type .fscrypt registered
[ 0.817999] Key type fscrypt-provisioning registered
[ 0.925141] ata2: found unknown device (class 0)
[ 0.933098] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.944470] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.972944] Freeing unused kernel image (initmem) memory: 2996K
[ 0.980045] Write protecting the kernel read-only data: 26624k
[ 0.991085] Freeing unused kernel image (text/rodata gap) memory: 1732K
[ 0.997242] Freeing unused kernel image (rodata/data gap) memory: 396K
[ 1.001307] rodata_test: all tests were successful
[ 1.004009] Run /init as init process
[ 1.015772] Alpine Init 3.14.0-r0
[ 1.017762] Loading boot drivers...
[ 1.035857] ACPI: bus type USB registered
[ 1.037094] usbcore: registered new interface driver usbfs
[ 1.038717] usbcore: registered new interface driver hub
[ 1.040389] usbcore: registered new device driver usb
[ 1.045041] usbcore: registered new interface driver usb-storage
[ 1.107162] loop: module loaded
[ 1.136247] ACPI: bus type drm_connector registered
[ 1.156902] Loading boot drivers: ok.
[ 1.159727] Mounting root...
[ 1.180554] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.183090] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.190547] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.192078] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.194404] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.209232] Console: switching to colour frame buffer device 160x50
[ 1.211729] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.242295] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.264841] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.297159] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.302058] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.306068] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.310654] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.352989] block sr0: the capability attribute has been deprecated.
[ 1.918826] EXT4-fs (vda): mounted filesystem 7af5430b-f94c-484c-8fe6-36878b6de03a ro with ordered data mode. Quota mode: none.
[ 1.929723] Mounting root: ok.
[ 2.309318] random: crng init done
Welcome to Alpine Linux 3.24
Kernel 6.18.35-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.6-r0 -> 3.0.7-r0)
(2/2) Upgrading apk-tools (3.0.6-r0 -> 3.0.7-r0)
Executing busybox-1.37.0-r31.trigger
Continuing with the main upgrade transaction:
( 1/21) Upgrading libblkid (2.42-r0 -> 2.42.1-r0)
( 2/21) Upgrading blkid (2.42-r0 -> 2.42.1-r0)
( 3/21) Upgrading libsmartcols (2.42-r0 -> 2.42.1-r0)
( 4/21) Upgrading partx (2.42-r0 -> 2.42.1-r0)
( 5/21) Upgrading libuuid (2.42-r0 -> 2.42.1-r0)
( 6/21) Upgrading libfdisk (2.42-r0 -> 2.42.1-r0)
( 7/21) Upgrading sfdisk (2.42-r0 -> 2.42.1-r0)
( 8/21) Upgrading libexpat (2.8.1-r0 -> 2.8.3-r0)
( 9/21) Upgrading python3 (3.14.5-r0 -> 3.14.7-r1)
(10/21) Upgrading python3-pycache-pyc0 (3.14.5-r0 -> 3.14.7-r1)
(11/21) Upgrading pyc (3.14.5-r0 -> 3.14.7-r1)
(12/21) Upgrading python3-pyc (3.14.5-r0 -> 3.14.7-r1)
(13/21) Upgrading py3-charset-normalizer (3.4.7-r0 -> 3.4.9-r0)
(14/21) Upgrading py3-charset-normalizer-pyc (3.4.7-r0 -> 3.4.9-r0)
(15/21) Upgrading tzdata (2026b-r0 -> 2026c-r0)
(16/21) Upgrading device-mapper-libs (2.03.35-r2 -> 2.03.35-r3)
(17/21) Upgrading linux-virt (6.18.35-r0 -> 6.18.44-r0)
(18/21) Upgrading libmount (2.42-r0 -> 2.42.1-r0)
(19/21) Upgrading mount (2.42-r0 -> 2.42.1-r0)
(20/21) Upgrading libnvmemi (1.16.1-r1 -> 1.16.2-r0)
(21/21) Upgrading libnvme (1.16.1-r1 -> 1.16.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.14.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.44-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 131.4 MiB in 201 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/12) Installing brotli-libs (1.2.0-r1)
( 2/12) Installing c-ares (1.34.8-r0)
( 3/12) Installing libunistring (1.4.2-r0)
( 4/12) Installing libidn2 (2.3.8-r0)
( 5/12) Installing nghttp2-libs (1.69.0-r0)
( 6/12) Installing libpsl (0.21.5-r3)
( 7/12) Installing libcurl (8.21.0-r0)
( 8/12) Installing pcre2 (10.47-r1)
( 9/12) Installing git (2.54.0-r0)
(10/12) Installing git-init-template (2.54.0-r0)
(11/12) Installing gnu-libiconv-libs (1.18-r0)
(12/12) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r31.trigger
OK: 144.1 MiB in 213 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/logdiag.git logdiag
Cloning into 'logdiag'...
remote: Enumerating objects: 2731, done.
remote: Counting objects: 100% (76/76), done.
remote: Compressing objects: 100% (74/74), done.
remote: Total 2731 (delta 34), reused 0 (delta 0), pack-reused 2655 (from 1)
Receiving objects: 100% (2731/2731), 924.38 KiB | 23.11 MiB/s, done.
Resolving deltas: 100% (1954/1954), done.
+ cd logdiag
+ git -c 'advice.detachedHead=false' checkout 7d35ac5cacb62d0148362afbe77e6be6daef91ab
HEAD is now at 7d35ac5 Improve Lua search
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=0.3.0-15-g7d35ac5
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/0.3.0-15-g7d35ac5/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake gtk+3.0-dev json-glib-dev lua5.4-dev imagemagick xvfb
( 1/237) Installing jansson (2.15.0-r0)
( 2/237) Installing binutils (2.45.1-r1)
( 3/237) Installing libmagic (5.47-r2)
( 4/237) Installing file (5.47-r2)
( 5/237) Installing libgcc-static (15.2.0-r5)
( 6/237) Installing libgomp (15.2.0-r5)
( 7/237) Installing libatomic (15.2.0-r5)
( 8/237) Installing gmp (6.3.0-r4)
( 9/237) Installing isl26 (0.26-r2)
( 10/237) Installing mpfr4 (4.2.2-r0)
( 11/237) Installing mpc1 (1.3.1-r1)
( 12/237) Installing gcc (15.2.0-r5)
( 13/237) Installing libstdc++-dev (15.2.0-r5)
( 14/237) Installing musl-dev (1.2.6-r2)
( 15/237) Installing g++ (15.2.0-r5)
( 16/237) Installing make (4.4.1-r4)
( 17/237) Installing fortify-headers (3.0.1-r2)
( 18/237) Installing patch (2.8-r0)
( 19/237) Installing build-base (0.5-r4)
( 20/237) Installing acl-libs (2.3.2-r1)
( 21/237) Installing lz4-libs (1.10.0-r1)
( 22/237) Installing libarchive (3.8.7-r0)
( 23/237) Installing rhash-libs (1.4.6-r0)
( 24/237) Installing libuv (1.52.1-r0)
( 25/237) Installing cmake (4.2.3-r0)
( 26/237) Installing pkgconf (2.5.1-r0)
( 27/237) Installing libintl (1.0-r0)
( 28/237) Installing glib (2.88.1-r1)
( 29/237) Installing libxml2 (2.13.9-r2)
( 30/237) Installing shared-mime-info (2.4-r7)
( 31/237) Installing bubblewrap (0.11.2-r0)
( 32/237) Installing libpng (1.6.58-r1)
( 33/237) Installing freetype (2.14.3-r0)
( 34/237) Installing fontconfig (2.17.1-r1)
( 35/237) Installing lcms2 (2.19-r0)
( 36/237) Installing libglycin (2.1.5-r0)
Executing libglycin-2.1.5-r0.post-install
* glycin loaders got split into their individual subpackages.
* By default, only glycin-image-rs & glycin-svg are installed.
* Additional loader subpackages are glycin-heif, glycin-jxl & glycin-raw.
*
* To install all available loaders, install glycin-loaders-all.
*
* Also the glycin-thumbnailer got subpackaged and isn't installed by default.
( 37/237) Installing glycin-image-rs (2.1.5-r0)
( 38/237) Installing libxau (1.0.12-r0)
( 39/237) Installing libxdmcp (1.1.5-r1)
( 40/237) Installing libxcb (1.17.0-r2)
( 41/237) Installing libx11 (1.8.13-r0)
( 42/237) Installing libxext (1.3.7-r0)
( 43/237) Installing libxrender (0.9.12-r0)
( 44/237) Installing pixman (0.46.4-r0)
( 45/237) Installing cairo (1.18.4-r1)
( 46/237) Installing libdav1d (1.5.3-r0)
( 47/237) Installing libxft (2.3.9-r0)
( 48/237) Installing fribidi (1.0.16-r3)
( 49/237) Installing graphite2 (1.3.14-r6)
( 50/237) Installing harfbuzz (13.2.1-r0)
( 51/237) Installing pango (1.57.1-r0)
( 52/237) Installing librsvg (2.62.3-r0)
( 53/237) Installing glycin-svg (2.1.5-r0)
( 54/237) Installing gdk-pixbuf (2.44.7-r1)
( 55/237) Installing bzip2-dev (1.0.8-r6)
( 56/237) Installing libxml2-utils (2.13.9-r2)
( 57/237) Installing docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.post-install
( 58/237) Installing libxslt (1.1.43-r3)
( 59/237) Installing docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.post-install
( 60/237) Installing docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.post-install
( 61/237) Installing docbook-xsl (1.79.2-r13)
( 62/237) Installing xz (5.8.3-r0)
( 63/237) Installing gettext-asprintf (1.0-r0)
( 64/237) Installing gettext-libs (1.0-r0)
( 65/237) Installing gettext-envsubst (1.0-r0)
( 66/237) Installing gettext (1.0-r0)
( 67/237) Installing gettext-dev (1.0-r0)
( 68/237) Installing py3-parsing (3.3.2-r1)
( 69/237) Installing py3-parsing-pyc (3.3.2-r1)
( 70/237) Installing py3-packaging (26.2-r0)
( 71/237) Installing py3-packaging-pyc (26.2-r0)
( 72/237) Installing linux-headers (7.0.0-r1)
( 73/237) Installing libffi-dev (3.5.2-r1)
( 74/237) Installing bsd-compat-headers (0.7.2-r6)
( 75/237) Installing libformw (6.6_p20260516-r0)
( 76/237) Installing libmenuw (6.6_p20260516-r0)
( 77/237) Installing libncurses++ (6.6_p20260516-r0)
( 78/237) Installing ncurses-dev (6.6_p20260516-r0)
( 79/237) Installing libedit-dev (20260508.3.1-r1)
( 80/237) Installing zlib-dev (1.3.2-r0)
( 81/237) Installing libpcre2-16 (10.47-r1)
( 82/237) Installing libpcre2-32 (10.47-r1)
( 83/237) Installing pcre2-dev (10.47-r1)
( 84/237) Installing liblastlog2 (2.42.1-r0)
( 85/237) Installing sqlite (3.53.2-r0)
( 86/237) Installing sqlite-dev (3.53.2-r0)
( 87/237) Installing util-linux-dev (2.42.1-r0)
( 88/237) Installing glib-dev (2.88.1-r1)
( 89/237) Installing expat (2.8.3-r0)
( 90/237) Installing expat-dev (2.8.3-r0)
( 91/237) Installing brotli (1.2.0-r1)
( 92/237) Installing brotli-dev (1.2.0-r1)
( 93/237) Installing libpng-dev (1.6.58-r1)
( 94/237) Installing freetype-dev (2.14.3-r0)
( 95/237) Installing fontconfig-dev (2.17.1-r1)
( 96/237) Installing lcms2-plugins (2.19-r0)
( 97/237) Installing libjpeg-turbo (3.1.3-r0)
( 98/237) Installing libturbojpeg (3.1.3-r0)
( 99/237) Installing libjpeg-turbo-dev (3.1.3-r0)
(100/237) Installing libsharpyuv (1.6.0-r0)
(101/237) Installing libwebp (1.6.0-r0)
(102/237) Installing tiff (4.7.1-r0)
(103/237) Installing libtiffxx (4.7.1-r0)
(104/237) Installing libwebpdecoder (1.6.0-r0)
(105/237) Installing libwebpdemux (1.6.0-r0)
(106/237) Installing libwebpmux (1.6.0-r0)
(107/237) Installing libwebp-dev (1.6.0-r0)
(108/237) Installing zstd (1.5.7-r2)
(109/237) Installing zstd-dev (1.5.7-r2)
(110/237) Installing tiff-dev (4.7.1-r0)
(111/237) Installing lcms2-dev (2.19-r0)
(112/237) Installing libseccomp-dev (2.6.0-r2)
(113/237) Installing libglycin-dev (2.1.5-r0)
(114/237) Installing gdk-pixbuf-dev (2.44.7-r1)
(115/237) Installing xorgproto (2025.1-r0)
(116/237) Installing libxau-dev (1.0.12-r0)
(117/237) Installing xcb-proto (1.17.0-r1)
(118/237) Installing xcb-proto-pyc (1.17.0-r1)
(119/237) Installing libxdmcp-dev (1.1.5-r1)
(120/237) Installing libxcb-dev (1.17.0-r2)
(121/237) Installing xtrans (1.6.0-r0)
(122/237) Installing libx11-dev (1.8.13-r0)
(123/237) Installing libepoxy (1.5.10-r1)
(124/237) Installing hwdata-pci (0.408-r0)
(125/237) Installing libpciaccess (0.19-r0)
(126/237) Installing libdrm (2.4.134-r0)
(127/237) Installing libpciaccess-dev (0.19-r0)
(128/237) Installing libdrm-dev (2.4.134-r0)
(129/237) Installing libxdamage (1.1.7-r0)
(130/237) Installing libxfixes (6.0.2-r0)
(131/237) Installing libxfixes-dev (6.0.2-r0)
(132/237) Installing libxdamage-dev (1.1.7-r0)
(133/237) Installing libxshmfence (1.3.3-r0)
(134/237) Installing libxshmfence-dev (1.3.3-r0)
(135/237) Installing llvm22-libs (22.1.3-r0)
(136/237) Installing spirv-tools (1.4.341.0-r0)
(137/237) Installing mesa (26.1.6-r0)
(138/237) Installing mesa-gles (26.1.6-r0)
(139/237) Installing mesa-gbm (26.1.6-r0)
(140/237) Installing wayland-libs-client (1.25.0-r0)
(141/237) Installing mesa-egl (26.1.6-r0)
(142/237) Installing libxxf86vm (1.1.7-r0)
(143/237) Installing mesa-gl (26.1.6-r0)
(144/237) Installing clang22-headers (22.1.3-r2)
(145/237) Installing libclc (22.1.3-r0)
(146/237) Installing spirv-llvm-translator-libs (22.1.0-r0)
(147/237) Installing clang22-libs (22.1.3-r2)
(148/237) Installing mesa-rusticl (26.1.6-r0)
(149/237) Installing libxext-dev (1.3.7-r0)
(150/237) Installing libxxf86vm-dev (1.1.7-r0)
(151/237) Installing mesa-dev (26.1.6-r0)
(152/237) Installing libepoxy-dev (1.5.10-r1)
(153/237) Installing libxi (1.8.3-r0)
(154/237) Installing libxi-dev (1.8.3-r0)
(155/237) Installing libxinerama (1.1.6-r0)
(156/237) Installing libxinerama-dev (1.1.6-r0)
(157/237) Installing xkeyboard-config (2.47-r0)
(158/237) Installing libxkbcommon (1.13.1-r0)
(159/237) Installing libxkbcommon-x11 (1.13.1-r0)
(160/237) Installing xz-dev (5.8.3-r0)
(161/237) Installing libxml2-dev (2.13.9-r2)
(162/237) Installing libxkbcommon-dev (1.13.1-r0)
(163/237) Installing wayland-libs-cursor (1.25.0-r0)
(164/237) Installing wayland-protocols (1.48-r0)
(165/237) Installing gobject-introspection (1.86.0-r1)
(166/237) Installing libxcomposite (0.4.7-r0)
(167/237) Installing libxcursor (1.2.3-r0)
(168/237) Installing libxrandr (1.5.5-r0)
(169/237) Installing libatk-1.0 (2.60.5-r0)
(170/237) Installing dbus-libs (1.16.2-r2)
(171/237) Installing at-spi2-core-libs (2.60.5-r0)
(172/237) Installing libxtst (1.2.5-r0)
(173/237) Installing at-spi2-core (2.60.5-r0)
(174/237) Installing libatk-bridge-2.0 (2.60.5-r0)
(175/237) Installing cairo-gobject (1.18.4-r1)
(176/237) Installing avahi-libs (0.9_rc4-r0)
(177/237) Installing nettle (3.10.2-r0)
(178/237) Installing libtasn1 (4.21.0-r0)
(179/237) Installing p11-kit (0.26.2-r0)
(180/237) Installing gnutls (3.8.13-r0)
(181/237) Installing cups-libs (2.4.19-r0)
(182/237) Installing wayland-libs-egl (1.25.0-r0)
(183/237) Installing gtk+3.0 (3.24.52-r0)
(184/237) Installing dbus-dev (1.16.2-r2)
(185/237) Installing libxtst-dev (1.2.5-r0)
(186/237) Installing at-spi2-core-dev (2.60.5-r0)
(187/237) Installing cairo-tools (1.18.4-r1)
(188/237) Installing pixman-dev (0.46.4-r0)
(189/237) Installing libxrender-dev (0.9.12-r0)
(190/237) Installing cairo-dev (1.18.4-r1)
(191/237) Installing fribidi-dev (1.0.16-r3)
(192/237) Installing pango-tools (1.57.1-r0)
(193/237) Installing harfbuzz-cairo (13.2.1-r0)
(194/237) Installing harfbuzz-gobject (13.2.1-r0)
(195/237) Installing icu-data-en (78.1-r0)
Executing icu-data-en-78.1-r0.post-install
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
(196/237) Installing icu-libs (78.1-r0)
(197/237) Installing harfbuzz-icu (13.2.1-r0)
(198/237) Installing harfbuzz-subset (13.2.1-r0)
(199/237) Installing graphite2-dev (1.3.14-r6)
(200/237) Installing icu (78.1-r0)
(201/237) Installing icu-dev (78.1-r0)
(202/237) Installing harfbuzz-dev (13.2.1-r0)
(203/237) Installing libxft-dev (2.3.9-r0)
(204/237) Installing pango-dev (1.57.1-r0)
(205/237) Installing wayland-libs-server (1.25.0-r0)
(206/237) Installing wayland-dev (1.25.0-r0)
(207/237) Installing libxcomposite-dev (0.4.7-r0)
(208/237) Installing libxcursor-dev (1.2.3-r0)
(209/237) Installing libxrandr-dev (1.5.5-r0)
(210/237) Installing gtk+3.0-dev (3.24.52-r0)
(211/237) Installing fftw-double-libs (3.3.11-r0)
(212/237) Installing libltdl (2.6.0-r1)
(213/237) Installing libraqm (0.10.2-r0)
(214/237) Installing imagemagick-libs (7.1.2.27-r0)
(215/237) Installing imagemagick (7.1.2.27-r0)
(216/237) Installing imagemagick-jpeg (7.1.2.27-r0)
(217/237) Installing imagemagick-svg (7.1.2.27-r0)
(218/237) Installing imagemagick-tiff (7.1.2.27-r0)
(219/237) Installing imagemagick-webp (7.1.2.27-r0)
(220/237) Installing imagemagick-pango (7.1.2.27-r0)
(221/237) Installing json-glib (1.10.8-r0)
(222/237) Installing json-glib-dev (1.10.8-r0)
(223/237) Installing lua5.4-libs (5.4.8-r0)
(224/237) Installing lua5.4 (5.4.8-r0)
(225/237) Installing lua5.4-dev (5.4.8-r0)
(226/237) Installing encodings (1.1.0-r0)
(227/237) Installing font-alias (1.0.6-r0)
(228/237) Installing libfontenc (1.1.9-r0)
(229/237) Installing mkfontscale (1.2.4-r0)
(230/237) Installing util-macros (1.20.2-r0)
(231/237) Installing font-cursor-misc (1.0.4-r1)
(232/237) Installing font-misc-misc (1.1.3-r1)
(233/237) Installing libxkbfile (1.2.0-r0)
(234/237) Installing xkbcomp (1.5.0-r0)
(235/237) Installing xorg-server-common (21.1.24-r0)
(236/237) Installing libxfont2 (2.0.8-r0)
(237/237) Installing xvfb (21.1.24-r0)
Executing busybox-1.37.0-r31.trigger
Executing glib-2.88.1-r1.trigger
Executing shared-mime-info-2.4-r7.trigger
Executing fontconfig-2.17.1-r1.trigger
Executing gdk-pixbuf-2.44.7-r1.trigger
Executing gtk+3.0-3.24.52-r0.trigger
Executing mkfontscale-1.2.4-r0.trigger
OK: 1099.4 MiB in 450 packages
+ doas apk add --no-interactive mingw-w64-gcc i686-mingw-w64-gcc coreutils cmake make pkgconf gettext glib-dev wine curl libarchive-tools ncurses
( 1/48) Installing coreutils-env (9.11-r0)
( 2/48) Installing coreutils-fmt (9.11-r0)
( 3/48) Installing coreutils-sha512sum (9.11-r0)
( 4/48) Installing libattr (2.5.2-r2)
( 5/48) Installing coreutils (9.11-r0)
( 6/48) Installing curl (8.21.0-r0)
( 7/48) Installing i686-mingw-w64-binutils (2.45.1-r0)
( 8/48) Installing i686-mingw-w64-crt (14.0.0-r0)
( 9/48) Installing i686-mingw-w64-headers (14.0.0-r0)
(10/48) Installing i686-mingw-w64-winpthreads (14.0.0-r0)
(11/48) Installing i686-mingw-w64-gcc (15.2.0-r0)
(12/48) Installing libarchive-tools (3.8.7-r0)
(13/48) Installing mingw-w64-binutils (2.45.1-r0)
(14/48) Installing mingw-w64-crt (14.0.0-r0)
(15/48) Installing mingw-w64-headers (14.0.0-r0)
(16/48) Installing mingw-w64-winpthreads (14.0.0-r0)
(17/48) Installing mingw-w64-gcc (15.2.0-r0)
(18/48) Installing ncurses (6.6_p20260516-r0)
(19/48) Installing opencl (2026.05.29-r0)
(20/48) Installing alsa-lib (1.2.15.3-r0)
(21/48) Installing libexif (0.6.26-r0)
(22/48) Installing libusb (1.0.30-r0)
(23/48) Installing libgphoto2 (2.5.33-r1)
Executing libgphoto2-2.5.33-r1.pre-install
(24/48) Installing libxv (1.0.13-r0)
(25/48) Installing cdparanoia-libs (10.2-r14)
(26/48) Installing graphene (1.10.8-r5)
(27/48) Installing gstreamer (1.28.3-r0)
(28/48) Installing gstreamer-ptp-helper (1.28.3-r0)
(29/48) Installing libogg (1.3.6-r0)
(30/48) Installing opus (1.6.1-r0)
(31/48) Installing orc (0.4.41-r0)
(32/48) Installing libtheora (1.2.0-r1)
(33/48) Installing libvorbis (1.3.7-r2)
(34/48) Installing gst-plugins-base (1.28.3-r0)
(35/48) Installing libpcap (1.10.6-r1)
(36/48) Installing pcsc-lite-libs (2.4.0-r4)
(37/48) Installing libasyncns (0.8-r5)
(38/48) Installing libflac (1.4.3-r2)
(39/48) Installing lame-libs (3.100-r5)
(40/48) Installing mpg123-libs (1.33.5-r0)
(41/48) Installing libsndfile (1.2.2-r2)
(42/48) Installing soxr (0.1.3-r7)
(43/48) Installing speexdsp (1.2.1-r2)
(44/48) Installing tdb-libs (1.4.15-r1)
(45/48) Installing libpulse (17.0-r7)
(46/48) Installing sane (1.4.0-r4)
Executing sane-1.4.0-r4.pre-install
(47/48) Installing eudev-libs (3.2.14-r6)
(48/48) Installing wine (11.0-r0)
Executing busybox-1.37.0-r31.trigger
OK: 2530.0 MiB in 498 packages
+ sleep 3
+ Xvfb :99
+ cmake -B build '-DBUILD_TESTING=ON'
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for modules 'gtk+-3.0;json-glib-1.0'
-- Found gtk+-3.0, version 3.24.52
-- Found json-glib-1.0, version 1.10.8
-- Checking for one of the modules 'lua>=5.2;lua5.5;lua-5.5;lua5.4;lua-5.4;lua5.3;lua-5.3;lua5.2;lua-5.2'
-- Found Gettext: /usr/bin/msgmerge (found version "1.0")
-- Could NOT find CppCheck (missing: CPPCHECK_EXECUTABLE)
-- Configuring done (0.6s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/logdiag/build
+ cmake --build build -- package
[ 3%] Generating cs.gmo
[ 6%] Generating de.gmo
[ 9%] Generating pl.gmo
[ 12%] Generating sk.gmo
[ 12%] Built target translations_1
[ 15%] Generating marshallers source files
INFO: Reading /home/ci/logdiag/liblogdiag/ld-marshal.list...
INFO: Reading /home/ci/logdiag/liblogdiag/ld-marshal.list...
[ 18%] Building C object CMakeFiles/liblogdiag.dir/ld-marshal.c.o
[ 21%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-types.c.o
[ 25%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-undo-action.c.o
[ 28%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram.c.o
[ 31%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram-object.c.o
[ 34%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram-symbol.c.o
[ 37%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram-connection.c.o
[ 40%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram-view.c.o
[ 43%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-library.c.o
[ 46%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-category-view.c.o
[ 50%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-category-tree-view.c.o
[ 53%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-category-symbol-view.c.o
[ 56%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-category.c.o
[ 59%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-symbol.c.o
[ 62%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-lua.c.o
[ 65%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-lua-symbol.c.o
[ 68%] Linking C static library liblogdiag.a
[ 68%] Built target liblogdiag
[ 71%] Compiling resources
[ 75%] Building C object CMakeFiles/logdiag.dir/gresource.c.o
[ 78%] Building C object CMakeFiles/logdiag.dir/src/ld-window-main.c.o
[ 81%] Building C object CMakeFiles/logdiag.dir/src/logdiag.c.o
[ 84%] Linking C executable logdiag
[ 87%] Built target logdiag
[ 90%] Building C object CMakeFiles/test-point-array.dir/tests/point-array.c.o
[ 93%] Linking C executable test-point-array
[ 93%] Built target test-point-array
[ 96%] Building C object CMakeFiles/test-diagram.dir/tests/diagram.c.o
[100%] Linking C executable test-diagram
[100%] Built target test-diagram
Run CPack packaging tool...
CPack: Create package using TGZ
CPack: Install projects
CPack: - Run preinstall target for: logdiag
CPack: - Install project: logdiag []
CPack: Create package
CPack: - package: /home/ci/logdiag/build/logdiag-0.3.0-15-g7d35ac5-Linux-x86_64.tar.gz generated.
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: logdiag
CPack: - Install project: logdiag []
CPack: Create package
CPack: - package: /home/ci/logdiag/build/logdiag-0.3.0-15-g7d35ac5-Linux-x86_64.zip generated.
+ DISPLAY=:99 cmake --build build -- test
Running tests...
Test project /home/ci/logdiag/build
Start 1: test-gschema-logdiag
1/3 Test #1: test-gschema-logdiag ............. Passed 0.00 sec
Start 2: test-point-array
2/3 Test #2: test-point-array ................. Passed 0.00 sec
Start 3: test-diagram
3/3 Test #3: test-diagram ..................... Passed 0.06 sec
100% tests passed, 0 tests failed out of 3
Total Test time (real) = 0.07 sec
+ cmake -P Win32Depends.cmake
CMake Deprecation Warning at Win32Depends.cmake:4 (cmake_minimum_required):
Compatibility with CMake < 3.10 will be removed from a future version of
CMake.
Update the VERSION argument <min> value. Or, use the <min>...<max> syntax
to tell CMake that the project requires at least <min> but has been updated
to work with policies introduced by <max> or earlier.
-- Cleaning up...
-- Downloading https://download.geany.org/contrib/gtk/gtk+-bundle_3.8.2-20131001_win32.zip...
-- Downloading http://sourceforge.net/projects/winlibs/files/GTK+/libjson-glib-1.0-1-mingw32.7z...
-- Downloading http://sourceforge.net/projects/mingw/files/MinGW/Extension/lua/lua-5.2.0-1/lua-5.2.0-1-mingw32-dll-52.tar.xz...
-- Downloading http://sourceforge.net/projects/mingw/files/MinGW/Extension/lua/lua-5.2.0-1/lua-5.2.0-1-mingw32-dev.tar.xz...
-- Extracting gtk+-bundle_3.8.2-20131001_win32.zip...
-- Extracting libjson-glib-1.0-1-mingw32.7z...
-- Extracting lua-5.2.0-1-mingw32-dll-52.tar.xz...
-- Extracting lua-5.2.0-1-mingw32-dev.tar.xz...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/atk.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/cairo-fc.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/cairo-ft.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/cairo-gobject.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/cairo-pdf.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/cairo-png.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/cairo-ps.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/cairo-svg.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/cairo-win32-font.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/cairo-win32.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/cairo.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/fontconfig.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/freetype2.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gail-3.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gdk-3.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gdk-pixbuf-2.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gdk-win32-3.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gio-2.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gio-windows-2.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/glib-2.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gmodule-2.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gmodule-export-2.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gmodule-no-export-2.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gobject-2.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gthread-2.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gtk+-3.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/gtk+-win32-3.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/json-glib-1.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/libcroco-0.6.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/libffi.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/liblzma.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/libpng.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/libpng15.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/librsvg-2.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/libtiff-4.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/libxml-2.0.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/pango.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/pangocairo.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/pangowin32.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/pixman-1.pc...
-- Fixing /home/ci/logdiag/win32-depends/lib/pkgconfig/zlib.pc...
+ cmake -B build-x86 '-DBUILD_TESTING=ON' '-DCMAKE_TOOLCHAIN_FILE=ToolchainCrossMinGWW64.cmake'
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/i686-w64-mingw32-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for modules 'gtk+-3.0;json-glib-1.0'
-- Found gtk+-3.0, version 3.8.2
-- Found json-glib-1.0, version 0.12.4
-- Checking for one of the modules 'lua>=5.2;lua5.5;lua-5.5;lua5.4;lua-5.4;lua5.3;lua-5.3;lua5.2;lua-5.2'
-- Found Gettext: /usr/bin/msgmerge (found version "1.0")
-- Found Intl: /home/ci/logdiag/win32-depends/lib/libintl.dll.a (found version "0.18.2")
-- Could NOT find CppCheck (missing: CPPCHECK_EXECUTABLE)
-- Configuring done (0.5s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/logdiag/build-x86
+ cmake --build build-x86
[ 3%] Generating cs.gmo
[ 6%] Generating de.gmo
[ 9%] Generating pl.gmo
[ 12%] Generating sk.gmo
[ 12%] Built target translations_1
[ 15%] Generating marshallers source files
INFO: Reading /home/ci/logdiag/liblogdiag/ld-marshal.list...
INFO: Reading /home/ci/logdiag/liblogdiag/ld-marshal.list...
[ 18%] Building C object CMakeFiles/liblogdiag.dir/ld-marshal.c.obj
[ 21%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-types.c.obj
[ 24%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-undo-action.c.obj
[ 27%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram.c.obj
[ 30%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram-object.c.obj
[ 33%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram-symbol.c.obj
[ 36%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram-connection.c.obj
[ 39%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram-view.c.obj
[ 42%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-library.c.obj
[ 45%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-category-view.c.obj
[ 48%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-category-tree-view.c.obj
[ 51%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-category-symbol-view.c.obj
[ 54%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-category.c.obj
[ 57%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-symbol.c.obj
[ 60%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-lua.c.obj
[ 63%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-lua-symbol.c.obj
[ 66%] Linking C static library liblogdiag.a
[ 66%] Built target liblogdiag
[ 69%] Compiling resources
[ 72%] Building C object CMakeFiles/logdiag.dir/gresource.c.obj
[ 75%] Building C object CMakeFiles/logdiag.dir/src/ld-window-main.c.obj
[ 78%] Building C object CMakeFiles/logdiag.dir/src/logdiag.c.obj
[ 81%] Building RC object CMakeFiles/logdiag.dir/share/logdiag.rc.res
[ 84%] Linking C executable logdiag.exe
[ 87%] Built target logdiag
[ 90%] Building C object CMakeFiles/test-point-array.dir/tests/point-array.c.obj
[ 93%] Linking C executable test-point-array.exe
[ 93%] Built target test-point-array
[ 96%] Building C object CMakeFiles/test-diagram.dir/tests/diagram.c.obj
[100%] Linking C executable test-diagram.exe
[100%] Built target test-diagram
+ cd build-x86
+ cpack -G ZIP
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: logdiag
CPack: - Install project: logdiag []
CPack: Create package
CPack: - package: /home/ci/logdiag/build-x86/logdiag-0.3.0-15-g7d35ac5-Windows-x86.zip generated.
+ sh -e Win64Depends.sh
-- Fetching repository DB
######################################################################### 100.0%
-- Resolving mingw-w64-ucrt-x86_64-gtk3 mingw-w64-ucrt-x86_64-lua mingw-w64-ucrt-x86_64-gcc-libs
-- Fetching mingw-w64-ucrt-x86_64-gtk3-3.24.52-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-pango-1.58.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-cairo-1.18.4-4-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-freetype-2.14.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-brotli-1.2.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-bzip2-1.0.8-4-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libpng-1.6.58-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-zlib-1.3.2-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-harfbuzz-14.3.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-glib2-2.88.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-gettext-runtime-1.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libiconv-1.19-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libffi-3.8.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-pcre2-10.47-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-wineditline-2.208-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-python-3.14.7-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-tk-8.6.18-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-tcl-8.6.18-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libb2-0.98.1-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-xz-5.8.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-tzdata-2026c-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-expat-2.8.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-mpdecimal-4.0.1-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-ncurses-6.6-4-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libsystre-1.0.2-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libtre-0.9.0-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-openssl-3.6.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-sqlite3-3.53.4-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-python-packaging-26.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-graphite2-1.3.15-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-fontconfig-2.18.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-lzo2-2.10-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-pixman-0.46.4-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-fribidi-1.0.16-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libthai-0.1.30-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libdatrie-0.2.14-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-shared-mime-info-2.5.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libxml2-2.15.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-gtk-update-icon-cache-3.24.52-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-gdk-pixbuf2-2.44.7-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libjpeg-turbo-3.2.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libtiff-4.7.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-jbigkit-2.1-6-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-lerc-4.1.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libdeflate-1.25-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libwebp-1.6.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-giflib-6.1.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-zstd-1.5.7-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-librsvg-2.62.3-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-hicolor-icon-theme-0.18-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-adwaita-icon-theme-50.0-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-adwaita-icon-theme-legacy-46.2-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-atk-2.60.6-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-json-glib-1.10.8-2-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libepoxy-1.5.10-7-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-egl-headers-1.5.r284.3ae2b7c-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-gles-headers-3.2.r1065.7fc154c-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-lua-5.5.1-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-gcc-libs-16.2.0-3-any.pkg.tar.zst
######################################################################## 100.0%
-- Fetching mingw-w64-ucrt-x86_64-libwinpthread-14.0.0.r283.ga7cb47123-1-any.pkg.tar.zst
######################################################################## 100.0%
-- Verifying checksums
-- Extracting packages
-- Configuring packages
wine: created the configuration directory '/home/ci/.wine'
002c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
004c:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
0054:fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.Windows.Common-Controls" (6.0.0.0)
error: XDG_RUNTIME_DIR is invalid or not set in the environment.
error: XDG_RUNTIME_DIR is invalid or not set in the environment.
0054:err:vulkan:vulkan_init_once Failed to load libvulkan.so.1
0054:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0054:err:winediag:nodrv_CreateWindow L"The explorer process failed to start."
0054:err:systray:initialize_systray Could not create tray window
0054:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr 0x80004002
0054:err:ole:CoMarshalInterface Failed to marshal the interface {6d5140c1-7436-11ce-8034-00aa006009fa}, hr 0x80004002
0054:err:ole:apartment_get_local_server_stream Failed: 0x80004002
0044:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0044:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
004c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
004c:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
004c:err:ole:apartment_createwindowifneeded CreateWindow failed with error 3
004c:err:ole:apartment_createwindowifneeded CreateWindow failed with error 0
004c:err:ole:apartment_createwindowifneeded CreateWindow failed with error 14007
004c:err:ole:StdMarshalImpl_MarshalInterface Failed to create ifstub, hr 0x800736b7
004c:err:ole:CoMarshalInterface Failed to marshal the interface {6d5140c1-7436-11ce-8034-00aa006009fa}, hr 0x800736b7
004c:err:ole:apartment_get_local_server_stream Failed: 0x800736b7
004c:err:ole:start_rpcss Failed to open RpcSs service
002c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
002c:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
0094:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
0094:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
009c:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
009c:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
00e0:fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
00e0:err:winediag:nodrv_CreateWindow Application tried to create a window, but no driver could be loaded.
00e0:err:winediag:nodrv_CreateWindow L"Make sure that your display server is running and that its variables are set."
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
00fc:err:ntoskrnl:ZwLoadDriver failed to create driver L"\\Registry\\Machine\\System\\CurrentControlSet\\Services\\winebth": c00000e5
002c:err:setupapi:SetupDiInstallDevice Failed to start service L"winebth" for device L"ROOT\\WINE\\WINEBTH", error 1359.
002c:err:setupapi:SetupDiInstallDevice Failed to control service L"winebth" for device L"ROOT\\WINE\\WINEBTH", error 1062.
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
002c:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0124:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0124:err:setupapi:do_file_copyW Unsupported style(s) 0x10
0024:fixme:reg:NtNotifyChangeMultipleKeys Unimplemented optional parameter
0024:fixme:reg:NtNotifyChangeMultipleKeys Unimplemented optional parameter
0024:fixme:reg:NtNotifyChangeMultipleKeys Unimplemented optional parameter
0024:fixme:reg:NtNotifyChangeMultipleKeys Unimplemented optional parameter
0024:fixme:reg:NtNotifyChangeMultipleKeys Unimplemented optional parameter
-- Success
+ cmake -B build-x64 '-DBUILD_TESTING=ON' '-DCMAKE_TOOLCHAIN_FILE=ToolchainCrossWin64.cmake'
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/x86_64-w64-mingw32-gcc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for modules 'gtk+-3.0;json-glib-1.0'
-- Found gtk+-3.0, version 3.24.52
-- Found json-glib-1.0, version 1.10.8
-- Checking for one of the modules 'lua>=5.2;lua5.5;lua-5.5;lua5.4;lua-5.4;lua5.3;lua-5.3;lua5.2;lua-5.2'
-- Found Gettext: /usr/bin/msgmerge (found version "1.0")
-- Found Intl: /home/ci/logdiag/win32-depends/lib/libintl.dll.a (found version "1.0.0")
-- Could NOT find CppCheck (missing: CPPCHECK_EXECUTABLE)
-- Configuring done (0.5s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/logdiag/build-x64
+ cmake --build build-x64
[ 3%] Generating cs.gmo
[ 6%] Generating de.gmo
[ 9%] Generating pl.gmo
[ 12%] Generating sk.gmo
[ 12%] Built target translations_1
[ 15%] Generating marshallers source files
INFO: Reading /home/ci/logdiag/liblogdiag/ld-marshal.list...
INFO: Reading /home/ci/logdiag/liblogdiag/ld-marshal.list...
[ 18%] Building C object CMakeFiles/liblogdiag.dir/ld-marshal.c.obj
[ 21%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-types.c.obj
[ 24%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-undo-action.c.obj
[ 27%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram.c.obj
[ 30%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram-object.c.obj
[ 33%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram-symbol.c.obj
[ 36%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram-connection.c.obj
[ 39%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-diagram-view.c.obj
[ 42%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-library.c.obj
[ 45%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-category-view.c.obj
[ 48%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-category-tree-view.c.obj
[ 51%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-category-symbol-view.c.obj
[ 54%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-category.c.obj
[ 57%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-symbol.c.obj
[ 60%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-lua.c.obj
[ 63%] Building C object CMakeFiles/liblogdiag.dir/liblogdiag/ld-lua-symbol.c.obj
[ 66%] Linking C static library liblogdiag.a
[ 66%] Built target liblogdiag
[ 69%] Compiling resources
[ 72%] Building C object CMakeFiles/logdiag.dir/gresource.c.obj
[ 75%] Building C object CMakeFiles/logdiag.dir/src/ld-window-main.c.obj
[ 78%] Building C object CMakeFiles/logdiag.dir/src/logdiag.c.obj
[ 81%] Building RC object CMakeFiles/logdiag.dir/share/logdiag.rc.res
[ 84%] Linking C executable logdiag.exe
[ 87%] Built target logdiag
[ 90%] Building C object CMakeFiles/test-point-array.dir/tests/point-array.c.obj
[ 93%] Linking C executable test-point-array.exe
[ 93%] Built target test-point-array
[ 96%] Building C object CMakeFiles/test-diagram.dir/tests/diagram.c.obj
[100%] Linking C executable test-diagram.exe
[100%] Built target test-diagram
+ cd build-x64
+ cpack -G ZIP
CPack: Create package using ZIP
CPack: Install projects
CPack: - Run preinstall target for: logdiag
CPack: - Install project: logdiag []
CPack: Create package
CPack: - package: /home/ci/logdiag/build-x64/logdiag-0.3.0-15-g7d35ac5-Windows-x86_64.zip generated.
+ mv build-x64/logdiag-0.3.0-15-g7d35ac5-Windows-x86_64.zip build-x86/logdiag-0.3.0-15-g7d35ac5-Windows-x86.zip /home/ci/acid-deploy
Deploy log
+ mv -- logdiag-0.3.0-15-g7d35ac5-Windows-x86_64.zip logdiag-0.3.0-15-g7d35ac5-Windows-x86.zip /home/acid/cd