- Created
- 2d ago
- Changed
- 2d ago
- Project
- p/liberty
- Commit
- 287225de4dff9caffed43851e58679bee2a27c01
- Runner
- Alpine 3.24
- State
- Success
- Notified
- 1
- Duration
- 1m1s
Runner log
+ test -n /home/acid
+ cd -- /home/acid
+ acid_dist=alpine
+ acid_image=generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2
+ exec runners/qemu.sh
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
++ cat data/proxy
+ test -n /home/acid
+ tmp=/tmp/acid-qemu
+ rm -rf -- /tmp/acid-qemu
+ mkdir -p -- /tmp/acid-qemu
+ cd -- /tmp/acid-qemu
+ umask 026
+ qemu-img create -b /home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 -F qcow2 -f qcow2 overlay.qcow2 6G
Formatting 'overlay.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=6442450944 backing_file=/home/acid/data/generic_alpine-3.24.1-x86_64-bios-cloudinit-r0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
+ cat
++ cat -- /home/acid/data/id_ed25519.pub
++ sed 's/^/ /' /etc/squid/bump-ca.cert.pem
++ cat
+ touch meta-data
+ cloud-localds seed.img user-data meta-data
+ echo 1000
+ exec qemu-system-x86_64 -enable-kvm -smp 4 -m 4G -drive file=overlay.qcow2,if=virtio,cache=unsafe -drive file=seed.img,if=virtio,format=raw -device virtio-net-pci,netdev=net0 -netdev user,id=net0,hostfwd=tcp:127.0.0.1:9099-:22 -audio none -nographic
SeaBIOS (version Arch Linux 1.17.0-2-2)
iPXE (http://ipxe.org) 00:03.0 C900 PCI2.10 PnP PMM+BEFD3F70+BEF33F70 C900
Booting from Hard Disk...
SYSLINUX 6.04 EDD 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
SYSLINUX 6.04 6.04-pre1 Copyright (C) 1994-2015 H. Peter Anvin et al
^[e^[%@^[)0^[(B
Loading vmlinuz-virt...Loading vmlinuz-virt... ook
k
Loading initramfs-virt..Lo.ading initramfs-virt...ookk
[ 0.000000] Linux version 6.18.35-0-virt (buildozer@build-3-24-x86_64) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-06-09 12:34:47
[ 0.000000] Command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.000000] x86/CPU: Model not found in latest microcode list
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffd9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffda000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[ 0.000000] DMI: Memory slots populated: 1/1
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 10859664333 cycles
[ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000004] tsc: Detected 3096.006 MHz processor
[ 0.000494] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000520] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.000523] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000557] last_pfn = 0xbffda max_arch_pfn = 0x400000000
[ 0.007131] found SMP MP-table at [mem 0x000f66b0-0x000f66bf]
[ 0.007198] RAMDISK: [mem 0x7f5a7000-0x7fffffff]
[ 0.007199] ACPI: Early table checksum verification disabled
[ 0.007201] ACPI: RSDP 0x00000000000F64C0 000014 (v00 BOCHS )
[ 0.007204] ACPI: RSDT 0x00000000BFFE244B 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007208] ACPI: FACP 0x00000000BFFE22E7 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007212] ACPI: DSDT 0x00000000BFFE0040 0022A7 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007215] ACPI: FACS 0x00000000BFFE0000 000040
[ 0.007217] ACPI: APIC 0x00000000BFFE235B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007219] ACPI: HPET 0x00000000BFFE23EB 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007222] ACPI: WAET 0x00000000BFFE2423 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.007223] ACPI: Reserving FACP table memory at [mem 0xbffe22e7-0xbffe235a]
[ 0.007225] ACPI: Reserving DSDT table memory at [mem 0xbffe0040-0xbffe22e6]
[ 0.007225] ACPI: Reserving FACS table memory at [mem 0xbffe0000-0xbffe003f]
[ 0.007226] ACPI: Reserving APIC table memory at [mem 0xbffe235b-0xbffe23ea]
[ 0.007226] ACPI: Reserving HPET table memory at [mem 0xbffe23eb-0xbffe2422]
[ 0.007226] ACPI: Reserving WAET table memory at [mem 0xbffe2423-0xbffe244a]
[ 0.007641] No NUMA configuration found
[ 0.007642] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.007645] NODE_DATA(0) allocated [mem 0x13fffbd40-0x13fffffff]
[ 0.007756] Zone ranges:
[ 0.007756] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007758] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007759] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007760] Movable zone start for each node
[ 0.007760] Early memory node ranges
[ 0.007760] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.007761] node 0: [mem 0x0000000000100000-0x00000000bffd9fff]
[ 0.007762] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.007763] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.007847] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007858] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.013426] On node 0, zone Normal: 38 pages in unavailable ranges
[ 0.014118] ACPI: PM-Timer IO Port: 0x608
[ 0.014132] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.014166] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.014169] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.014170] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.014171] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.014172] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.014172] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.014176] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.014177] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.014184] CPU topo: Max. logical packages: 1
[ 0.014185] CPU topo: Max. logical dies: 1
[ 0.014185] CPU topo: Max. dies per package: 1
[ 0.014188] CPU topo: Max. threads per core: 1
[ 0.014189] CPU topo: Num. cores per package: 4
[ 0.014189] CPU topo: Num. threads per package: 4
[ 0.014190] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[ 0.014204] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.014216] [mem 0xc0000000-0xfeffbfff] available for PCI devices
[ 0.014217] Booting paravirtualized kernel on KVM
[ 0.014218] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.017872] setup_percpu: NR_CPUS:256 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.018066] percpu: Embedded 55 pages/cpu s185752 r8192 d31336 u524288
[ 0.018089] kvm-guest: PV spinlocks disabled, no host support
[ 0.018089] Kernel command line: BOOT_IMAGE=vmlinuz-virt root=LABEL=/ modules=sd-mod,usb-storage,ext4,ena,gve,mana console=ttyS0,115200n8 console=ttyAMA0,115200n8 console=tty0 initrd=initramfs-virt
[ 0.018131] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4,ena,gve,mana", will be passed to user space.
[ 0.018135] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.018490] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.018650] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.018716] software IO TLB: area num 4.
[ 0.029736] Fallback order for Node 0: 0
[ 0.029741] Built 1 zonelists, mobility grouping on. Total pages: 1048440
[ 0.029742] Policy zone: Normal
[ 0.029936] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.041822] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.041884] Kernel/User page tables isolation: enabled
[ 0.042589] Dynamic Preempt: none
[ 0.042738] rcu: Preemptible hierarchical RCU implementation.
[ 0.042738] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.042739] Trampoline variant of Tasks RCU enabled.
[ 0.042740] Tracing variant of Tasks RCU enabled.
[ 0.042740] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.042741] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.042747] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.042748] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.046708] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.046907] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.047211] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.053952] Console: colour VGA+ 80x25
[ 0.053955] printk: legacy console [tty0] enabled
[ 0.090733] printk: legacy console [ttyS0] enabled
[ 0.246197] ACPI: Core revision 20250807
[ 0.247582] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.250169] APIC: Switch to symmetric I/O mode setup
[ 0.251826] x2apic enabled
[ 0.252971] APIC: Switched APIC routing to: physical x2apic
[ 0.255594] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.257315] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.260202] Calibrating delay loop (skipped) preset value.. 6192.01 BogoMIPS (lpj=3096006)
[ 0.261293] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.262202] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.264204] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.266202] Speculative Store Bypass: Vulnerable
[ 0.267203] Spectre V2 : Mitigation: Retpolines
[ 0.269202] ITS: Mitigation: Aligned branch/return thunks
[ 0.270202] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.271202] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.272202] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.274203] active return thunk: its_return_thunk
[ 0.275203] x86/fpu: x87 FPU will use FXSAVE
[ 0.290888] Freeing SMP alternatives memory: 40K
[ 0.292206] pid_max: default: 32768 minimum: 301
[ 0.293485] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.295624] landlock: Up and running.
[ 0.297202] Yama: becoming mindful.
[ 0.298339] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.299223] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.403812] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.404367] Performance Events: unsupported Netburst CPU model 107 no PMU driver, software events only.
[ 0.406227] signal: max sigframe size: 1440
[ 0.408230] rcu: Hierarchical SRCU implementation.
[ 0.409202] rcu: Max phase no-delay instances is 400.
[ 0.410243] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.415170] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.416248] smp: Bringing up secondary CPUs ...
[ 0.417289] smpboot: x86: Booting SMP configuration:
[ 0.418204] .... node #0, CPUs: #1 #2 #3
[ 0.422257] smp: Brought up 1 node, 4 CPUs
[ 0.425202] smpboot: Total of 4 processors activated (24768.04 BogoMIPS)
[ 0.426371] Memory: 3999208K/4193760K available (14650K kernel code, 2032K rwdata, 9844K rodata, 2996K init, 1168K bss, 189416K reserved, 0K cma-reserved)
[ 0.428449] devtmpfs: initialized
[ 0.430037] x86/mm: Memory block size: 128MB
[ 0.432204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.433207] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.435208] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.437454] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.438283] audit: initializing netlink subsys (disabled)
[ 0.439229] audit: type=2000 audit(1787329411.914:1): state=initialized audit_enabled=0 res=1
[ 0.439247] thermal_sys: Registered thermal governor 'step_wise'
[ 0.441212] cpuidle: using governor ladder
[ 0.443224] cpuidle: using governor menu
[ 0.444298] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.447264] PCI: Using configuration type 1 for base access
[ 0.448279] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.450247] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.451203] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.452445] ACPI: Added _OSI(Module Device)
[ 0.454202] ACPI: Added _OSI(Processor Device)
[ 0.455202] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.456753] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.459294] ACPI: Interpreter enabled
[ 0.460209] ACPI: PM: (supports S0 S3 S5)
[ 0.461202] ACPI: Using IOAPIC for interrupt routing
[ 0.462213] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.464202] PCI: Using E820 reservations for host bridge windows
[ 0.465274] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.468862] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.469206] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.470203] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.472212] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended configuration space under this bridge
[ 0.473528] acpiphp: Slot [3] registered
[ 0.474246] acpiphp: Slot [4] registered
[ 0.476224] acpiphp: Slot [5] registered
[ 0.477223] acpiphp: Slot [6] registered
[ 0.478224] acpiphp: Slot [7] registered
[ 0.479223] acpiphp: Slot [8] registered
[ 0.481104] acpiphp: Slot [9] registered
[ 0.482223] acpiphp: Slot [10] registered
[ 0.483225] acpiphp: Slot [11] registered
[ 0.484236] acpiphp: Slot [12] registered
[ 0.485222] acpiphp: Slot [13] registered
[ 0.487223] acpiphp: Slot [14] registered
[ 0.488224] acpiphp: Slot [15] registered
[ 0.489242] acpiphp: Slot [16] registered
[ 0.491193] acpiphp: Slot [17] registered
[ 0.492236] acpiphp: Slot [18] registered
[ 0.493226] acpiphp: Slot [19] registered
[ 0.494222] acpiphp: Slot [20] registered
[ 0.496236] acpiphp: Slot [21] registered
[ 0.497235] acpiphp: Slot [22] registered
[ 0.498248] acpiphp: Slot [23] registered
[ 0.499222] acpiphp: Slot [24] registered
[ 0.501222] acpiphp: Slot [25] registered
[ 0.502225] acpiphp: Slot [26] registered
[ 0.503224] acpiphp: Slot [27] registered
[ 0.504222] acpiphp: Slot [28] registered
[ 0.505222] acpiphp: Slot [29] registered
[ 0.507235] acpiphp: Slot [30] registered
[ 0.508223] acpiphp: Slot [31] registered
[ 0.509219] PCI host bridge to bus 0000:00
[ 0.510208] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.512212] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.514203] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.516203] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.518203] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window]
[ 0.520203] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.522299] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint
[ 0.525919] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint
[ 0.528024] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint
[ 0.530264] pci 0000:00:01.1: BAR 4 [io 0xc120-0xc12f]
[ 0.531266] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk
[ 0.533202] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk
[ 0.535205] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk
[ 0.536202] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk
[ 0.538409] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[ 0.540382] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.541216] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.542575] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.546096] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.547257] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[ 0.549252] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[ 0.550342] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.553708] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[ 0.557216] pci 0000:00:03.0: BAR 0 [io 0xc100-0xc11f]
[ 0.559201] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[ 0.560252] pci 0000:00:03.0: BAR 4 [mem 0x140000000-0x140003fff 64bit pref]
[ 0.562216] pci 0000:00:03.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[ 0.566263] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.569109] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f]
[ 0.570216] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[ 0.571252] pci 0000:00:04.0: BAR 4 [mem 0x140004000-0x140007fff 64bit pref]
[ 0.573997] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[ 0.576950] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0ff]
[ 0.578218] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[ 0.579256] pci 0000:00:05.0: BAR 4 [mem 0x140008000-0x14000bfff 64bit pref]
[ 0.584510] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.585398] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.586336] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.587358] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.588273] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.589646] iommu: Default domain type: Translated
[ 0.591202] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.592416] SCSI subsystem initialized
[ 0.594296] pps_core: LinuxPPS API ver. 1 registered
[ 0.596203] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.598207] PTP clock support registered
[ 0.600565] PCI: Using ACPI for IRQ routing
[ 0.602426] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.604274] clocksource: Switched to clocksource kvm-clock
[ 0.606601] VFS: Disk quotas dquot_6.6.0
[ 0.607982] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.610322] pnp: PnP ACPI init
[ 0.611730] pnp: PnP ACPI: found 6 devices
[ 0.619548] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.622478] NET: Registered PF_INET protocol family
[ 0.624125] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.635193] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.637615] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.639677] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.641861] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.643924] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.645759] MPTCP token hash table entries: 4096 (order: 5, 98304 bytes, linear)
[ 0.647762] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.649613] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.651657] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.653214] NET: Registered PF_XDP protocol family
[ 0.654562] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.656216] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.657860] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.659664] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.661484] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window]
[ 0.663362] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.664901] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.666622] PCI: CLS 0 bytes, default 64
[ 0.667752] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.667825] Unpacking initramfs...
[ 0.668095] software IO TLB: mapped [mem 0x00000000bbfda000-0x00000000bffda000] (64MB)
[ 0.672700] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2ca08abdf49, max_idle_ns: 440795295992 ns
[ 0.675570] Initialise system trusted keyrings
[ 0.677007] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.685518] Key type asymmetric registered
[ 0.686867] Asymmetric key parser 'x509' registered
[ 0.688576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.690956] io scheduler mq-deadline registered
[ 0.692419] io scheduler kyber registered
[ 0.693823] io scheduler bfq registered
[ 0.695730] ERST DBG: ERST support is disabled.
[ 0.698039] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[ 0.702078] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[ 0.705999] ACPI: \_SB_.LNKA: Enabled at IRQ 10
[ 0.709318] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.711622] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.714813] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.717125] scsi host0: ata_piix
[ 0.718533] scsi host1: ata_piix
[ 0.719717] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14 lpm-pol 0
[ 0.722238] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15 lpm-pol 0
[ 0.724865] hv_vmbus: registering driver hv_netvsc
[ 0.726564] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.730063] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.731834] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.733544] hv_vmbus: registering driver hyperv_keyboard
[ 0.735453] rtc_cmos 00:05: RTC can wake from S4
[ 0.737895] rtc_cmos 00:05: registered as rtc0
[ 0.739612] rtc_cmos 00:05: setting system clock to 2026-08-21T16:23:31 UTC (1787329411)
[ 0.739622] Freeing initrd memory: 10596K
[ 0.740200] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.746040] intel_pstate: CPU model not supported
[ 0.748004] gre: GRE over IPv4 demultiplexer driver
[ 0.749829] NET: Registered PF_INET6 protocol family
[ 0.752031] Segment Routing with IPv6
[ 0.753346] In-situ OAM (IOAM) with IPv6
[ 0.754993] Key type dns_resolver registered
[ 0.756659] IPI shorthand broadcast: enabled
[ 0.760195] sched_clock: Marking stable (552053909, 207286989)->(826339332, -66998434)
[ 0.762923] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.763022] registered taskstats version 1
[ 0.766777] Loading compiled-in X.509 certificates
[ 0.771464] Loaded X.509 cert 'alpinelinux.org: Alpine Linux kernel key: d76a695f66ad9cd28f5c22a8508f36e91f521f7a'
[ 0.775941] Demotion targets for Node 0: null
[ 0.777377] Key type .fscrypt registered
[ 0.778581] Key type fscrypt-provisioning registered
[ 0.877616] ata2: found unknown device (class 0)
[ 0.880122] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 0.883760] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 0.898826] Freeing unused kernel image (initmem) memory: 2996K
[ 0.900628] Write protecting the kernel read-only data: 26624k
[ 0.903409] Freeing unused kernel image (text/rodata gap) memory: 1732K
[ 0.905531] Freeing unused kernel image (rodata/data gap) memory: 396K
[ 0.907366] rodata_test: all tests were successful
[ 0.908820] Run /init as init process
[ 0.917050] Alpine Init 3.14.0-r0
[ 0.918748] Loading boot drivers...
[ 0.936419] ACPI: bus type USB registered
[ 0.937885] usbcore: registered new interface driver usbfs
[ 0.939700] usbcore: registered new interface driver hub
[ 0.941489] usbcore: registered new device driver usb
[ 0.946354] usbcore: registered new interface driver usb-storage
[ 1.008094] loop: module loaded
[ 1.036808] ACPI: bus type drm_connector registered
[ 1.056114] Loading boot drivers: ok.
[ 1.059311] Mounting root...
[ 1.076888] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.079231] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 1.086829] [drm] Found bochs VGA, ID 0xb0c5.
[ 1.088097] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[ 1.090109] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0
[ 1.104910] Console: switching to colour frame buffer device 160x50
[ 1.107386] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[ 1.135205] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 1.162803] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.183522] virtio_blk virtio1: 4/0/0 default/read/poll queues
[ 1.187073] virtio_blk virtio1: [vda] 12582912 512-byte logical blocks (6.44 GB/6.00 GiB)
[ 1.190228] virtio_blk virtio2: 4/0/0 default/read/poll queues
[ 1.193721] virtio_blk virtio2: [vdb] 732 512-byte logical blocks (375 kB/366 KiB)
[ 1.238357] block sr0: the capability attribute has been deprecated.
[ 1.772136] EXT4-fs (vda): mounted filesystem 7af5430b-f94c-484c-8fe6-36878b6de03a ro with ordered data mode. Quota mode: none.
[ 1.784219] Mounting root: ok.
[ 2.503346] random: crng init done
Welcome to Alpine Linux 3.24
Kernel 6.18.35-0-virt on x86_64 (/dev/ttyS0)
alpine-ci login:
Task log
status: done
+ export 'CTEST_OUTPUT_ON_FAILURE=1'
+ doas apk upgrade --no-interactive
Preupgrading:
(1/2) Upgrading libapk (3.0.6-r0 -> 3.0.7-r0)
(2/2) Upgrading apk-tools (3.0.6-r0 -> 3.0.7-r0)
Executing busybox-1.37.0-r31.trigger
Continuing with the main upgrade transaction:
( 1/21) Upgrading libblkid (2.42-r0 -> 2.42.1-r0)
( 2/21) Upgrading blkid (2.42-r0 -> 2.42.1-r0)
( 3/21) Upgrading libsmartcols (2.42-r0 -> 2.42.1-r0)
( 4/21) Upgrading partx (2.42-r0 -> 2.42.1-r0)
( 5/21) Upgrading libuuid (2.42-r0 -> 2.42.1-r0)
( 6/21) Upgrading libfdisk (2.42-r0 -> 2.42.1-r0)
( 7/21) Upgrading sfdisk (2.42-r0 -> 2.42.1-r0)
( 8/21) Upgrading libexpat (2.8.1-r0 -> 2.8.3-r0)
( 9/21) Upgrading python3 (3.14.5-r0 -> 3.14.7-r1)
(10/21) Upgrading python3-pycache-pyc0 (3.14.5-r0 -> 3.14.7-r1)
(11/21) Upgrading pyc (3.14.5-r0 -> 3.14.7-r1)
(12/21) Upgrading python3-pyc (3.14.5-r0 -> 3.14.7-r1)
(13/21) Upgrading py3-charset-normalizer (3.4.7-r0 -> 3.4.9-r0)
(14/21) Upgrading py3-charset-normalizer-pyc (3.4.7-r0 -> 3.4.9-r0)
(15/21) Upgrading tzdata (2026b-r0 -> 2026c-r0)
(16/21) Upgrading device-mapper-libs (2.03.35-r2 -> 2.03.35-r3)
(17/21) Upgrading linux-virt (6.18.35-r0 -> 6.18.44-r0)
(18/21) Upgrading libmount (2.42-r0 -> 2.42.1-r0)
(19/21) Upgrading mount (2.42-r0 -> 2.42.1-r0)
(20/21) Upgrading libnvmemi (1.16.1-r1 -> 1.16.2-r0)
(21/21) Upgrading libnvme (1.16.1-r1 -> 1.16.2-r0)
Executing busybox-1.37.0-r31.trigger
Executing kmod-34.2-r1.trigger
Executing mkinitfs-3.14.0-r0.trigger
* creating /boot/initramfs-virt for 6.18.44-0-virt
Executing syslinux-6.04_pre1-r19.trigger
* /boot is device /dev/vda
OK: 131.4 MiB in 201 packages
+ doas apk add --no-interactive git gnu-libiconv
( 1/12) Installing brotli-libs (1.2.0-r1)
( 2/12) Installing c-ares (1.34.8-r0)
( 3/12) Installing libunistring (1.4.2-r0)
( 4/12) Installing libidn2 (2.3.8-r0)
( 5/12) Installing nghttp2-libs (1.69.0-r0)
( 6/12) Installing libpsl (0.21.5-r3)
( 7/12) Installing libcurl (8.21.0-r0)
( 8/12) Installing pcre2 (10.47-r1)
( 9/12) Installing git (2.54.0-r0)
(10/12) Installing git-init-template (2.54.0-r0)
(11/12) Installing gnu-libiconv-libs (1.18-r0)
(12/12) Installing gnu-libiconv (1.18-r0)
Executing busybox-1.37.0-r31.trigger
OK: 144.1 MiB in 213 packages
+ doas ln -s /usr/bin/gnu-iconv /usr/local/bin/iconv
+ git clone --recursive https://git.janouch.name/p/liberty.git liberty
Cloning into 'liberty'...
remote: Enumerating objects: 979, done.
remote: Counting objects: 100% (448/448), done.
remote: Compressing objects: 100% (445/445), done.
remote: Total 979 (delta 287), reused 0 (delta 0), pack-reused 531 (from 1)
Receiving objects: 100% (979/979), 476.57 KiB | 19.86 MiB/s, done.
Resolving deltas: 100% (608/608), done.
+ cd liberty
+ git -c 'advice.detachedHead=false' checkout 287225de4dff9caffed43851e58679bee2a27c01
HEAD is now at 287225d Extend toolchain file
+ git describe --always --tags --match 'v*'
+ sed s/^v//
+ version=287225d
+ find . -name CMakeLists.txt -exec sed -i 's/\${PROJECT_VERSION}/287225d/' '{}' +
+ mkdir /home/ci/acid-deploy
+ doas apk add --no-interactive build-base cmake openssl-dev pulseaudio-dev go nodejs
( 1/93) Installing jansson (2.15.0-r0)
( 2/93) Installing binutils (2.45.1-r1)
( 3/93) Installing libmagic (5.47-r2)
( 4/93) Installing file (5.47-r2)
( 5/93) Installing libgcc-static (15.2.0-r5)
( 6/93) Installing libgomp (15.2.0-r5)
( 7/93) Installing libatomic (15.2.0-r5)
( 8/93) Installing gmp (6.3.0-r4)
( 9/93) Installing isl26 (0.26-r2)
(10/93) Installing mpfr4 (4.2.2-r0)
(11/93) Installing mpc1 (1.3.1-r1)
(12/93) Installing gcc (15.2.0-r5)
(13/93) Installing libstdc++-dev (15.2.0-r5)
(14/93) Installing musl-dev (1.2.6-r2)
(15/93) Installing g++ (15.2.0-r5)
(16/93) Installing make (4.4.1-r4)
(17/93) Installing fortify-headers (3.0.1-r2)
(18/93) Installing patch (2.8-r0)
(19/93) Installing build-base (0.5-r4)
(20/93) Installing acl-libs (2.3.2-r1)
(21/93) Installing lz4-libs (1.10.0-r1)
(22/93) Installing libarchive (3.8.7-r0)
(23/93) Installing rhash-libs (1.4.6-r0)
(24/93) Installing libuv (1.52.1-r0)
(25/93) Installing cmake (4.2.3-r0)
(26/93) Installing go (1.26.3-r0)
(27/93) Installing ada-libs (3.3.0-r0)
(28/93) Installing icu-data-en (78.1-r0)
Executing icu-data-en-78.1-r0.post-install
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
(29/93) Installing icu-libs (78.1-r0)
(30/93) Installing simdjson (4.2.4-r0)
(31/93) Installing simdutf (9.0.0-r0)
(32/93) Installing nodejs (24.18.1-r0)
(33/93) Installing pkgconf (2.5.1-r0)
(34/93) Installing openssl-dev (3.5.7-r0)
(35/93) Installing libintl (1.0-r0)
(36/93) Installing glib (2.88.1-r1)
(37/93) Installing libxau (1.0.12-r0)
(38/93) Installing libxdmcp (1.1.5-r1)
(39/93) Installing libxcb (1.17.0-r2)
(40/93) Installing libx11 (1.8.13-r0)
(41/93) Installing libasyncns (0.8-r5)
(42/93) Installing dbus-libs (1.16.2-r2)
(43/93) Installing libltdl (2.6.0-r1)
(44/93) Installing orc (0.4.41-r0)
(45/93) Installing libogg (1.3.6-r0)
(46/93) Installing libflac (1.4.3-r2)
(47/93) Installing alsa-lib (1.2.15.3-r0)
(48/93) Installing lame-libs (3.100-r5)
(49/93) Installing mpg123-libs (1.33.5-r0)
(50/93) Installing opus (1.6.1-r0)
(51/93) Installing libvorbis (1.3.7-r2)
(52/93) Installing libsndfile (1.2.2-r2)
(53/93) Installing soxr (0.1.3-r7)
(54/93) Installing speexdsp (1.2.1-r2)
(55/93) Installing tdb-libs (1.4.15-r1)
(56/93) Installing libpulse (17.0-r7)
(57/93) Installing libpulse-mainloop-glib (17.0-r7)
(58/93) Installing bzip2-dev (1.0.8-r6)
(59/93) Installing libxml2 (2.13.9-r2)
(60/93) Installing libxml2-utils (2.13.9-r2)
(61/93) Installing docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.post-install
(62/93) Installing libxslt (1.1.43-r3)
(63/93) Installing docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.post-install
(64/93) Installing docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.post-install
(65/93) Installing docbook-xsl (1.79.2-r13)
(66/93) Installing xz (5.8.3-r0)
(67/93) Installing gettext-asprintf (1.0-r0)
(68/93) Installing gettext-libs (1.0-r0)
(69/93) Installing gettext-envsubst (1.0-r0)
(70/93) Installing gettext (1.0-r0)
(71/93) Installing gettext-dev (1.0-r0)
(72/93) Installing py3-parsing (3.3.2-r1)
(73/93) Installing py3-parsing-pyc (3.3.2-r1)
(74/93) Installing py3-packaging (26.2-r0)
(75/93) Installing py3-packaging-pyc (26.2-r0)
(76/93) Installing linux-headers (7.0.0-r1)
(77/93) Installing libffi-dev (3.5.2-r1)
(78/93) Installing bsd-compat-headers (0.7.2-r6)
(79/93) Installing libformw (6.6_p20260516-r0)
(80/93) Installing libmenuw (6.6_p20260516-r0)
(81/93) Installing libncurses++ (6.6_p20260516-r0)
(82/93) Installing ncurses-dev (6.6_p20260516-r0)
(83/93) Installing libedit-dev (20260508.3.1-r1)
(84/93) Installing zlib-dev (1.3.2-r0)
(85/93) Installing libpcre2-16 (10.47-r1)
(86/93) Installing libpcre2-32 (10.47-r1)
(87/93) Installing pcre2-dev (10.47-r1)
(88/93) Installing liblastlog2 (2.42.1-r0)
(89/93) Installing sqlite (3.53.2-r0)
(90/93) Installing sqlite-dev (3.53.2-r0)
(91/93) Installing util-linux-dev (2.42.1-r0)
(92/93) Installing glib-dev (2.88.1-r1)
(93/93) Installing pulseaudio-dev (17.0-r7)
Executing busybox-1.37.0-r31.trigger
Executing glib-2.88.1-r1.trigger
* No schema files found: doing nothing.
OK: 798.9 MiB in 306 packages
+ doas apk add --no-interactive lua5.4-dev ncurses-dev
(1/3) Installing lua5.4-libs (5.4.8-r0)
(2/3) Installing lua5.4 (5.4.8-r0)
(3/3) Installing lua5.4-dev (5.4.8-r0)
Executing busybox-1.37.0-r31.trigger
OK: 800.8 MiB in 309 packages
+ cmake -B build
-- The C compiler identification is GNU 15.2.0
-- The CXX compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++ - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
-- Found Threads: TRUE
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for modules 'libssl;libcrypto'
-- Found libssl, version 3.5.7
-- Found libcrypto, version 3.5.7
-- Checking for module 'libpulse'
-- Found libpulse, version 17.0
CMake Warning at CMakeLists.txt:135 (message):
Cannot test generated protocol code for Swift
-- Configuring done (0.5s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build
+ cmake --build build
[ 4%] Building C object CMakeFiles/test-liberty.dir/tests/liberty.c.o
[ 9%] Linking C executable test-liberty
[ 9%] Built target test-liberty
[ 14%] Building C object CMakeFiles/test-proto.dir/tests/proto.c.o
In file included from /home/ci/liberty/tests/proto.c:34:
/home/ci/liberty/tests/proto.c: In function 'test_irc':
/home/ci/liberty/tests/../liberty.c:247:29: warning: right-hand operand of comma expression has no effect [-Wunused-value]
247 | ((condition) ? true : \
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
248 | (assertion_failure_handler (g_soft_asserts_are_deadly, \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
249 | __FILE__, __LINE__, __func__, #condition), false))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/ci/liberty/tests/proto.c:56:25: note: in expansion of macro 'soft_assert'
56 | soft_assert (!"found unexpected message tag");
| ^~~~~~~~~~~
[ 19%] Linking C executable test-proto
[ 19%] Built target test-proto
[ 23%] Building C object CMakeFiles/test-xdg.dir/tests/xdg.c.o
[ 28%] Linking C executable test-xdg
[ 28%] Built target test-xdg
[ 33%] Building C object CMakeFiles/test-pulse.dir/tests/pulse.c.o
[ 38%] Linking C executable test-pulse
[ 38%] Built target test-pulse
[ 42%] Generating man page for libertyxdr
[ 42%] Built target docs
[ 47%] Generating test protocol code (c)
[ 52%] Generating test protocol code (cpp)
[ 57%] Generating test protocol code (go)
[ 61%] Generating test protocol code (mjs)
[ 66%] Generating test protocol code (swift)
[ 66%] Built target test-lxdrgen-outputs
[ 71%] Building C object CMakeFiles/test-lxdrgen-c.dir/tests/lxdrgen.c.o
[ 76%] Linking C executable test-lxdrgen-c
[ 80%] Built target test-lxdrgen-c
[ 85%] Building CXX object CMakeFiles/test-lxdrgen-cpp.dir/tests/lxdrgen.cpp.o
[ 90%] Building CXX object CMakeFiles/test-lxdrgen-cpp.dir/tools/lxdrgen-cpp-posix.cpp.o
[ 95%] Linking CXX executable test-lxdrgen-cpp
[100%] Built target test-lxdrgen-cpp
+ cmake --build build -- test
Running tests...
Test project /home/ci/liberty/build
Start 1: test-liberty
1/10 Test #1: test-liberty ..................... Passed 0.01 sec
Start 2: test-proto
2/10 Test #2: test-proto ....................... Passed 0.00 sec
Start 3: test-xdg
3/10 Test #3: test-xdg ......................... Passed 0.00 sec
Start 4: test-pulse
4/10 Test #4: test-pulse ....................... Passed 0.00 sec
Start 5: test-help2adoc
5/10 Test #5: test-help2adoc ................... Passed 0.03 sec
Start 6: test-cmake-parser
6/10 Test #6: test-cmake-parser ................ Passed 0.03 sec
Start 7: test-lxdrgen-c
7/10 Test #7: test-lxdrgen-c ................... Passed 0.00 sec
Start 8: test-lxdrgen-cpp
8/10 Test #8: test-lxdrgen-cpp ................. Passed 0.00 sec
Start 9: test-lxdrgen-go
9/10 Test #9: test-lxdrgen-go .................. Passed 4.43 sec
Start 10: test-lxdrgen-mjs
10/10 Test #10: test-lxdrgen-mjs ................. Passed 0.04 sec
100% tests passed, 0 tests failed out of 10
Total Test time (real) = 4.56 sec
+ cmake -B build-wdye54 -S tools/wdye
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Curses: /usr/lib/libcurses.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (0.3s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build-wdye54
+ cmake --build build-wdye54
[ 50%] Building C object CMakeFiles/wdye.dir/wdye.c.o
[100%] Linking C executable wdye
[100%] Built target wdye
+ cmake --build build-wdye54 -- test
Running tests...
Test project /home/ci/liberty/build-wdye54
Start 1: wdye
1/1 Test #1: wdye ............................. Passed 0.50 sec
100% tests passed, 0 tests failed out of 1
Total Test time (real) = 0.51 sec
+ doas apk del --no-interactive lua5.4-dev
(1/3) Purging lua5.4-dev (5.4.8-r0)
(2/3) Purging lua5.4 (5.4.8-r0)
(3/3) Purging lua5.4-libs (5.4.8-r0)
Executing busybox-1.37.0-r31.trigger
OK: 798.9 MiB in 306 packages
+ doas apk add --no-interactive lua5.3-dev
(1/4) Installing linenoise (1.0-r5)
(2/4) Installing lua5.3-libs (5.3.6-r6)
(3/4) Installing lua5.3 (5.3.6-r6)
(4/4) Installing lua5.3-dev (5.3.6-r6)
Executing busybox-1.37.0-r31.trigger
OK: 800.5 MiB in 310 packages
+ cmake -B build-wdye53 -S tools/wdye
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Curses: /usr/lib/libcurses.so
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (0.2s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build-wdye53
+ cmake --build build-wdye53
[ 50%] Building C object CMakeFiles/wdye.dir/wdye.c.o
[100%] Linking C executable wdye
[100%] Built target wdye
+ cmake --build build-wdye53 -- test
Running tests...
Test project /home/ci/liberty/build-wdye53
Start 1: wdye
1/1 Test #1: wdye ............................. Passed 0.50 sec
100% tests passed, 0 tests failed out of 1
Total Test time (real) = 0.51 sec
+ doas apk del --no-interactive --rdepends ncurses-dev
( 1/59) Purging pulseaudio-dev (17.0-r7)
( 2/59) Purging libpulse-mainloop-glib (17.0-r7)
( 3/59) Purging libpulse (17.0-r7)
( 4/59) Purging py3-packaging-pyc (26.2-r0)
( 5/59) Purging py3-parsing-pyc (3.3.2-r1)
( 6/59) Purging soxr (0.1.3-r7)
( 7/59) Purging speexdsp (1.2.1-r2)
( 8/59) Purging tdb-libs (1.4.15-r1)
( 9/59) Purging libsndfile (1.2.2-r2)
(10/59) Purging alsa-lib (1.2.15.3-r0)
(11/59) Purging glib-dev (2.88.1-r1)
(12/59) Purging bzip2-dev (1.0.8-r6)
(13/59) Purging docbook-xsl (1.79.2-r13)
(14/59) Purging docbook-xsl-ns (1.79.2-r13)
Executing docbook-xsl-ns-1.79.2-r13.pre-deinstall
(15/59) Purging docbook-xsl-nons (1.79.2-r13)
Executing docbook-xsl-nons-1.79.2-r13.pre-deinstall
(16/59) Purging docbook-xml (4.5-r10)
Executing docbook-xml-4.5-r10.pre-deinstall
(17/59) Purging gettext-dev (1.0-r0)
(18/59) Purging xz (5.8.3-r0)
(19/59) Purging gettext-asprintf (1.0-r0)
(20/59) Purging gettext (1.0-r0)
(21/59) Purging gettext-envsubst (1.0-r0)
(22/59) Purging libxml2-utils (2.13.9-r2)
(23/59) Purging libxslt (1.1.43-r3)
(24/59) Purging py3-packaging (26.2-r0)
(25/59) Purging py3-parsing (3.3.2-r1)
(26/59) Purging pcre2-dev (10.47-r1)
(27/59) Purging zlib-dev (1.3.2-r0)
(28/59) Purging libpcre2-16 (10.47-r1)
(29/59) Purging libpcre2-32 (10.47-r1)
(30/59) Purging libedit-dev (20260508.3.1-r1)
(31/59) Purging ncurses-dev (6.6_p20260516-r0)
(32/59) Purging libncurses++ (6.6_p20260516-r0)
(33/59) Purging bsd-compat-headers (0.7.2-r6)
(34/59) Purging dbus-libs (1.16.2-r2)
(35/59) Purging gettext-libs (1.0-r0)
(36/59) Purging glib (2.88.1-r1)
(37/59) Purging lame-libs (3.100-r5)
(38/59) Purging libasyncns (0.8-r5)
(39/59) Purging libffi-dev (3.5.2-r1)
(40/59) Purging linux-headers (7.0.0-r1)
(41/59) Purging libflac (1.4.3-r2)
(42/59) Purging libformw (6.6_p20260516-r0)
(43/59) Purging libintl (1.0-r0)
(44/59) Purging util-linux-dev (2.42.1-r0)
(45/59) Purging liblastlog2 (2.42.1-r0)
(46/59) Purging libltdl (2.6.0-r1)
(47/59) Purging libmenuw (6.6_p20260516-r0)
(48/59) Purging libvorbis (1.3.7-r2)
(49/59) Purging libogg (1.3.6-r0)
(50/59) Purging libx11 (1.8.13-r0)
(51/59) Purging libxcb (1.17.0-r2)
(52/59) Purging libxau (1.0.12-r0)
(53/59) Purging libxdmcp (1.1.5-r1)
(54/59) Purging libxml2 (2.13.9-r2)
(55/59) Purging mpg123-libs (1.33.5-r0)
(56/59) Purging opus (1.6.1-r0)
(57/59) Purging orc (0.4.41-r0)
(58/59) Purging sqlite-dev (3.53.2-r0)
(59/59) Purging sqlite (3.53.2-r0)
Executing busybox-1.37.0-r31.trigger
OK: 710.0 MiB in 251 packages
+ cmake -B build-wdye -S tools/wdye
-- The C compiler identification is GNU 15.2.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Could NOT find Curses (missing: CURSES_LIBRARY CURSES_INCLUDE_PATH)
-- Found PkgConfig: /usr/bin/pkg-config (found version "2.5.1")
-- Checking for one of the modules 'lua53;lua5.3;lua-5.3;lua54;lua5.4;lua-5.4;lua>=5.3'
-- Configuring done (0.2s)
-- Generating done (0.0s)
-- Build files have been written to: /home/ci/liberty/build-wdye
+ cmake --build build-wdye
[ 50%] Building C object CMakeFiles/wdye.dir/wdye.c.o
[100%] Linking C executable wdye
[100%] Built target wdye
Deploy log